| public UpdateShape ( ObjectShapePacket shapeBlock ) : void | ||
| shapeBlock | ObjectShapePacket | |
| return | void | |
// Prim type torus, tube and ring.
protected void SetPrimitiveShapeParams(SceneObjectPart part, int holeshape, LSL_Vector cut, float hollow, LSL_Vector twist, LSL_Vector holesize, LSL_Vector topshear, LSL_Vector profilecut, LSL_Vector taper_a, float revolutions, float radiusoffset, float skew, byte profileshape, byte pathcurve)
{
float tempFloat; // Use in float expressions below to avoid byte cast precision issues.
ObjectShapePacket.ObjectDataBlock shapeBlock;
shapeBlock = SetPrimitiveBlockShapeParams(part, holeshape, cut, hollow, twist, profileshape, pathcurve);
// profile/path swapped for a torrus, tube, ring
shapeBlock.PathBegin = shapeBlock.ProfileBegin;
shapeBlock.PathEnd = shapeBlock.ProfileEnd;
if (holesize.x < 0.05f)
{
holesize.x = 0.05f;
}
if (holesize.x > 1f)
{
holesize.x = 1f;
}
if (holesize.y < 0.05f)
{
holesize.y = 0.05f;
}
if (holesize.y > 0.5f)
{
holesize.y = 0.5f;
}
tempFloat = (float)(100.0d * (2.0d - holesize.x));
shapeBlock.PathScaleX = (byte)tempFloat;
tempFloat = (float)(100.0d * (2.0d - holesize.y));
shapeBlock.PathScaleY = (byte)tempFloat;
if (topshear.x < -0.5f)
{
topshear.x = -0.5f;
}
if (topshear.x > 0.5f)
{
topshear.x = 0.5f;
}
if (topshear.y < -0.5f)
{
topshear.y = -0.5f;
}
if (topshear.y > 0.5f)
{
topshear.y = 0.5f;
}
tempFloat = (float)(100.0d * topshear.x);
shapeBlock.PathShearX = (byte)tempFloat;
tempFloat = (float)(100.0d * topshear.y);
shapeBlock.PathShearY = (byte)tempFloat;
if (profilecut.x < 0f)
{
profilecut.x = 0f;
}
if (profilecut.x > 1f)
{
profilecut.x = 1f;
}
if (profilecut.y < 0f)
{
profilecut.y = 0f;
}
if (profilecut.y > 1f)
{
profilecut.y = 1f;
}
if (profilecut.y - profilecut.x < 0.05f)
{
profilecut.x = profilecut.y - 0.05f;
if (profilecut.x < 0.0f)
{
profilecut.x = 0.0f;
profilecut.y = 0.05f;
}
}
shapeBlock.ProfileBegin = (ushort)(50000 * profilecut.x);
shapeBlock.ProfileEnd = (ushort)(50000 * (1 - profilecut.y));
if (taper_a.x < -1f)
{
taper_a.x = -1f;
}
if (taper_a.x > 1f)
{
taper_a.x = 1f;
}
if (taper_a.y < -1f)
{
taper_a.y = -1f;
}
if (taper_a.y > 1f)
{
taper_a.y = 1f;
}
tempFloat = (float)(100.0d * taper_a.x);
shapeBlock.PathTaperX = (sbyte)tempFloat;
tempFloat = (float)(100.0d * taper_a.y);
shapeBlock.PathTaperY = (sbyte)tempFloat;
if (revolutions < 1f)
{
revolutions = 1f;
}
if (revolutions > 4f)
{
revolutions = 4f;
}
tempFloat = 66.66667f * (revolutions - 1.0f);
shapeBlock.PathRevolutions = (byte)tempFloat;
// limits on radiusoffset depend on revolutions and hole size (how?) seems like the maximum range is 0 to 1
if (radiusoffset < 0f)
{
radiusoffset = 0f;
}
if (radiusoffset > 1f)
{
radiusoffset = 1f;
}
tempFloat = 100.0f * radiusoffset;
shapeBlock.PathRadiusOffset = (sbyte)tempFloat;
if (skew < -0.95f)
{
skew = -0.95f;
}
if (skew > 0.95f)
{
skew = 0.95f;
}
tempFloat = 100.0f * skew;
shapeBlock.PathSkew = (sbyte)tempFloat;
part.Shape.SculptEntry = false;
part.UpdateShape(shapeBlock);
}
// Prim type sculpt.
protected void SetPrimitiveShapeParams(SceneObjectPart part, string map, int type, byte pathcurve)
{
ObjectShapePacket.ObjectDataBlock shapeBlock = new ObjectShapePacket.ObjectDataBlock();
UUID sculptId;
if (!UUID.TryParse(map, out sculptId))
{
sculptId = InventoryKey(map, (int)AssetType.Texture);
}
if (sculptId == UUID.Zero)
return;
shapeBlock.PathCurve = pathcurve;
shapeBlock.ObjectLocalID = part.LocalId;
shapeBlock.PathScaleX = 100;
shapeBlock.PathScaleY = 150;
int flag = type & (ScriptBaseClass.PRIM_SCULPT_FLAG_INVERT | ScriptBaseClass.PRIM_SCULPT_FLAG_MIRROR);
if (type != (ScriptBaseClass.PRIM_SCULPT_TYPE_CYLINDER | flag) &&
type != (ScriptBaseClass.PRIM_SCULPT_TYPE_PLANE | flag) &&
type != (ScriptBaseClass.PRIM_SCULPT_TYPE_SPHERE | flag) &&
type != (ScriptBaseClass.PRIM_SCULPT_TYPE_TORUS | flag))
{
// default
type = (int)ScriptBaseClass.PRIM_SCULPT_TYPE_SPHERE;
}
part.Shape.SetSculptProperties((byte)type, sculptId);
part.Shape.SculptEntry = true;
part.UpdateShape(shapeBlock);
}
// Prim type sphere.
protected void SetPrimitiveShapeParams(SceneObjectPart part, int holeshape, LSL_Vector cut, float hollow, LSL_Vector twist, LSL_Vector dimple, byte profileshape, byte pathcurve)
{
ObjectShapePacket.ObjectDataBlock shapeBlock;
shapeBlock = SetPrimitiveBlockShapeParams(part, holeshape, cut, hollow, twist, profileshape, pathcurve);
// profile/path swapped for a sphere
shapeBlock.PathBegin = shapeBlock.ProfileBegin;
shapeBlock.PathEnd = shapeBlock.ProfileEnd;
shapeBlock.PathScaleX = 100;
shapeBlock.PathScaleY = 100;
if (dimple.x < 0f)
{
dimple.x = 0f;
}
if (dimple.x > 1f)
{
dimple.x = 1f;
}
if (dimple.y < 0f)
{
dimple.y = 0f;
}
if (dimple.y > 1f)
{
dimple.y = 1f;
}
if (dimple.y - cut.x < 0.05f)
{
dimple.x = cut.y - 0.05f;
}
shapeBlock.ProfileBegin = (ushort)(50000 * dimple.x);
shapeBlock.ProfileEnd = (ushort)(50000 * (1 - dimple.y));
part.Shape.SculptEntry = false;
part.UpdateShape(shapeBlock);
}
// Prim type box, cylinder and prism.
protected void SetPrimitiveShapeParams(SceneObjectPart part, int holeshape, LSL_Vector cut, float hollow, LSL_Vector twist, LSL_Vector taper_b, LSL_Vector topshear, byte profileshape, byte pathcurve)
{
float tempFloat; // Use in float expressions below to avoid byte cast precision issues.
ObjectShapePacket.ObjectDataBlock shapeBlock;
shapeBlock = SetPrimitiveBlockShapeParams(part, holeshape, cut, hollow, twist, profileshape, pathcurve);
if (taper_b.x < 0f)
{
taper_b.x = 0f;
}
if (taper_b.x > 2f)
{
taper_b.x = 2f;
}
if (taper_b.y < 0f)
{
taper_b.y = 0f;
}
if (taper_b.y > 2f)
{
taper_b.y = 2f;
}
tempFloat = (float)(100.0d * (2.0d - taper_b.x));
shapeBlock.PathScaleX = (byte)tempFloat;
tempFloat = (float)(100.0d * (2.0d - taper_b.y));
shapeBlock.PathScaleY = (byte)tempFloat;
if (topshear.x < -0.5f)
{
topshear.x = -0.5f;
}
if (topshear.x > 0.5f)
{
topshear.x = 0.5f;
}
if (topshear.y < -0.5f)
{
topshear.y = -0.5f;
}
if (topshear.y > 0.5f)
{
topshear.y = 0.5f;
}
tempFloat = (float)(100.0d * topshear.x);
shapeBlock.PathShearX = (byte)tempFloat;
tempFloat = (float)(100.0d * topshear.y);
shapeBlock.PathShearY = (byte)tempFloat;
part.Shape.SculptEntry = false;
part.UpdateShape(shapeBlock);
}
protected void SetPrimitiveShapeParams(SceneObjectPart part, int holeshape, LSL_Vector cut, float hollow, LSL_Vector twist, LSL_Vector taper_b, LSL_Vector topshear, byte fudge)
{
ObjectShapePacket.ObjectDataBlock shapeBlock;
shapeBlock = SetPrimitiveBlockShapeParams(part, holeshape, cut, hollow, twist);
shapeBlock.ProfileCurve += fudge;
if (taper_b.x < 0f)
{
taper_b.x = 0f;
}
if (taper_b.x > 2f)
{
taper_b.x = 2f;
}
if (taper_b.y < 0f)
{
taper_b.y = 0f;
}
if (taper_b.y > 2f)
{
taper_b.y = 2f;
}
shapeBlock.PathScaleX = (byte)(100 * (2.0 - taper_b.x));
shapeBlock.PathScaleY = (byte)(100 * (2.0 - taper_b.y));
if (topshear.x < -0.5f)
{
topshear.x = -0.5f;
}
if (topshear.x > 0.5f)
{
topshear.x = 0.5f;
}
if (topshear.y < -0.5f)
{
topshear.y = -0.5f;
}
if (topshear.y > 0.5f)
{
topshear.y = 0.5f;
}
shapeBlock.PathShearX = (byte)(100 * topshear.x);
shapeBlock.PathShearY = (byte)(100 * topshear.y);
part.Shape.SculptEntry = false;
part.UpdateShape(shapeBlock);
}
protected void SetPrimitiveShapeParams(SceneObjectPart part, int holeshape, LSL_Vector cut, float hollow, LSL_Vector twist, LSL_Vector holesize, LSL_Vector topshear, LSL_Vector profilecut, LSL_Vector taper_a, float revolutions, float radiusoffset, float skew, byte fudge)
{
ObjectShapePacket.ObjectDataBlock shapeBlock;
shapeBlock = SetPrimitiveBlockShapeParams(part, holeshape, cut, hollow, twist);
shapeBlock.ProfileCurve += fudge;
// profile/path swapped for a torrus, tube, ring
shapeBlock.PathBegin = shapeBlock.ProfileBegin;
shapeBlock.PathEnd = shapeBlock.ProfileEnd;
if (holesize.x < 0.05f)
{
holesize.x = 0.05f;
}
if (holesize.x > 1f)
{
holesize.x = 1f;
}
if (holesize.y < 0.05f)
{
holesize.y = 0.05f;
}
if (holesize.y > 0.5f)
{
holesize.y = 0.5f;
}
shapeBlock.PathScaleX = (byte)(100 * (2 - holesize.x));
shapeBlock.PathScaleY = (byte)(100 * (2 - holesize.y));
if (topshear.x < -0.5f)
{
topshear.x = -0.5f;
}
if (topshear.x > 0.5f)
{
topshear.x = 0.5f;
}
if (topshear.y < -0.5f)
{
topshear.y = -0.5f;
}
if (topshear.y > 0.5f)
{
topshear.y = 0.5f;
}
shapeBlock.PathShearX = (byte)(100 * topshear.x);
shapeBlock.PathShearY = (byte)(100 * topshear.y);
if (profilecut.x < 0f)
{
profilecut.x = 0f;
}
if (profilecut.x > 1f)
{
profilecut.x = 1f;
}
if (profilecut.y < 0f)
{
profilecut.y = 0f;
}
if (profilecut.y > 1f)
{
profilecut.y = 1f;
}
if (profilecut.y - cut.x < 0.05f)
{
profilecut.x = cut.y - 0.05f;
}
shapeBlock.ProfileBegin = (ushort)(50000 * profilecut.x);
shapeBlock.ProfileEnd = (ushort)(50000 * (1 - profilecut.y));
if (taper_a.x < -1f)
{
taper_a.x = -1f;
}
if (taper_a.x > 1f)
{
taper_a.x = 1f;
}
if (taper_a.y < -1f)
{
taper_a.y = -1f;
}
if (taper_a.y > 1f)
{
taper_a.y = 1f;
}
shapeBlock.PathTaperX = (sbyte)(100 * taper_a.x);
shapeBlock.PathTaperY = (sbyte)(100 * taper_a.y);
if (revolutions < 1f)
{
revolutions = 1f;
}
if (revolutions > 4f)
{
revolutions = 4f;
}
shapeBlock.PathRevolutions = (byte)(66.666667 * (revolutions - 1.0));
// limits on radiusoffset depend on revolutions and hole size (how?) seems like the maximum range is 0 to 1
if (radiusoffset < 0f)
{
radiusoffset = 0f;
}
if (radiusoffset > 1f)
{
radiusoffset = 1f;
}
shapeBlock.PathRadiusOffset = (sbyte)(100 * radiusoffset);
if (skew < -0.95f)
{
skew = -0.95f;
}
if (skew > 0.95f)
{
skew = 0.95f;
}
shapeBlock.PathSkew = (sbyte)(100 * skew);
part.Shape.SculptEntry = false;
part.UpdateShape(shapeBlock);
}
protected void SetPrimitiveShapeParams(SceneObjectPart part, string map, int type)
{
ObjectShapePacket.ObjectDataBlock shapeBlock = new ObjectShapePacket.ObjectDataBlock();
UUID sculptId;
if (!UUID.TryParse(map, out sculptId))
{
sculptId = InventoryKey(map, (int)AssetType.Texture);
}
if (sculptId == UUID.Zero)
return;
shapeBlock.ObjectLocalID = part.LocalId;
shapeBlock.PathScaleX = 100;
shapeBlock.PathScaleY = 150;
int onlytype = (type & 7);//Removes the sculpt flags according to libOMV
if (onlytype != (int)ScriptBaseClass.PRIM_SCULPT_TYPE_CYLINDER &&
onlytype != (int)ScriptBaseClass.PRIM_SCULPT_TYPE_PLANE &&
onlytype != (int)ScriptBaseClass.PRIM_SCULPT_TYPE_SPHERE &&
onlytype != (int)ScriptBaseClass.PRIM_SCULPT_TYPE_TORUS &&
onlytype != (int)ScriptBaseClass.PRIM_SCULPT_TYPE_MESH)
{
// default
type |= (int)ScriptBaseClass.PRIM_SCULPT_TYPE_SPHERE;
}
// retain pathcurve
shapeBlock.PathCurve = part.Shape.PathCurve;
part.Shape.SetSculptProperties((byte)type, sculptId);
part.Shape.SculptEntry = true;
part.UpdateShape(shapeBlock);
}
