static void SimpleImageExample(MIL_ID MilSystem, MIL_ID MilDisplay)
{
MIL_ID MilImage = MIL.M_NULL; // Image buffer identifier.
MIL_ID GraphicList = MIL.M_NULL; // Graphic list identifier.
MIL_ID MilMetrolContext = MIL.M_NULL; // Metrology Context
MIL_ID MilMetrolResult = MIL.M_NULL; // Metrology Result
double Status = 0.0;
double Value = 0.0;
MIL_INT FeatureIndexForTopConstructedPoint = MIL.M_FEATURE_INDEX(1);
MIL_INT FeatureIndexForMiddleConstructedPoint = MIL.M_FEATURE_INDEX(2);
MIL_INT[] FeatureIndexForConstructedSegment = new MIL_INT[2];
MIL_INT[] FeatureIndexForTolerance = new MIL_INT[2];
FeatureIndexForConstructedSegment[0] = MIL.M_FEATURE_INDEX(3);
FeatureIndexForConstructedSegment[1] = MIL.M_FEATURE_INDEX(4);
FeatureIndexForTolerance[0] = MIL.M_FEATURE_INDEX(5);
FeatureIndexForTolerance[1] = MIL.M_FEATURE_INDEX(6);
// Restore and display the source image.
MIL.MbufRestore(METROL_SIMPLE_IMAGE_FILE, MilSystem, ref MilImage);
MIL.MdispSelect(MilDisplay, MilImage);
// Allocate a graphic list to hold the subpixel annotations to draw.
MIL.MgraAllocList(MilSystem, MIL.M_DEFAULT, ref GraphicList);
// Associate the graphic list to the display for annotations.
MIL.MdispControl(MilDisplay, MIL.M_ASSOCIATED_GRAPHIC_LIST_ID, GraphicList);
// Allocate metrology context and result.
MIL.MmetAlloc(MilSystem, MIL.M_DEFAULT, ref MilMetrolContext);
MIL.MmetAllocResult(MilSystem, MIL.M_DEFAULT, ref MilMetrolResult);
// Add a first measured circle feature to context and set its search region
MIL.MmetAddFeature(MilMetrolContext, MIL.M_MEASURED, MIL.M_CIRCLE, MIL.M_DEFAULT,
MIL.M_DEFAULT, MIL.M_NULL, MIL.M_NULL, MIL.M_DEFAULT, MIL.M_DEFAULT);
MIL.MmetSetRegion(MilMetrolContext, MIL.M_FEATURE_INDEX(1), MIL.M_DEFAULT, MIL.M_RING,
TOP_RING_POSITION_X, TOP_RING_POSITION_Y, TOP_RING_START_RADIUS,
TOP_RING_END_RADIUS, MIL.M_NULL, MIL.M_NULL);
// Add a second measured circle feature to context and set its search region
MIL.MmetAddFeature(MilMetrolContext, MIL.M_MEASURED, MIL.M_CIRCLE, MIL.M_DEFAULT,
MIL.M_DEFAULT, MIL.M_NULL, MIL.M_NULL, MIL.M_DEFAULT, MIL.M_DEFAULT);
MIL.MmetSetRegion(MilMetrolContext, MIL.M_FEATURE_INDEX(2), MIL.M_DEFAULT, MIL.M_RING,
MIDDLE_RING_POSITION_X, MIDDLE_RING_POSITION_Y, MIDDLE_RING_START_RADIUS,
MIDDLE_RING_END_RADIUS, MIL.M_NULL, MIL.M_NULL);
// Add a first constructed point feature to context
MIL.MmetAddFeature(MilMetrolContext, MIL.M_CONSTRUCTED, MIL.M_POINT, MIL.M_DEFAULT,
MIL.M_CENTER, ref FeatureIndexForTopConstructedPoint, MIL.M_NULL, 1, MIL.M_DEFAULT);
// Add a second constructed point feature to context
MIL.MmetAddFeature(MilMetrolContext, MIL.M_CONSTRUCTED, MIL.M_POINT, MIL.M_DEFAULT,
MIL.M_CENTER, ref FeatureIndexForMiddleConstructedPoint, MIL.M_NULL, 1, MIL.M_DEFAULT);
// Add a constructed segment feature to context passing through the two points
MIL.MmetAddFeature(MilMetrolContext, MIL.M_CONSTRUCTED, MIL.M_SEGMENT, MIL.M_DEFAULT,
MIL.M_CONSTRUCTION, FeatureIndexForConstructedSegment, MIL.M_NULL, 2, MIL.M_DEFAULT);
// Add a first segment feature to context and set its search region
MIL.MmetAddFeature(MilMetrolContext, MIL.M_MEASURED, MIL.M_SEGMENT, MIL.M_DEFAULT,
MIL.M_DEFAULT, MIL.M_NULL, MIL.M_NULL, MIL.M_DEFAULT, MIL.M_DEFAULT);
MIL.MmetSetRegion(MilMetrolContext, MIL.M_FEATURE_INDEX(6), MIL.M_DEFAULT, MIL.M_RECTANGLE,
BOTTOM_RECT_POSITION_X, BOTTOM_RECT_POSITION_Y, BOTTOM_RECT_WIDTH,
BOTTOM_RECT_HEIGHT, BOTTOM_RECT_ANGLE, MIL.M_NULL);
// Add perpendicularity tolerance
MIL.MmetAddTolerance(MilMetrolContext, MIL.M_PERPENDICULARITY, MIL.M_DEFAULT, PERPENDICULARITY_MIN,
PERPENDICULARITY_MAX, FeatureIndexForTolerance, MIL.M_NULL, 2, MIL.M_DEFAULT);
// Calculate
MIL.MmetCalculate(MilMetrolContext, MilImage, MilMetrolResult, MIL.M_DEFAULT);
// Draw region
MIL.MgraColor(MIL.M_DEFAULT, REGION_COLOR);
MIL.MmetDraw(MIL.M_DEFAULT, MilMetrolResult, GraphicList, MIL.M_DRAW_REGION, MIL.M_DEFAULT, MIL.M_DEFAULT);
Console.Write("Regions used to calculate measured features:\n");
Console.Write("- two measured circles\n");
Console.Write("- one measured segment\n");
Console.Write("Press <Enter> to continue.\n\n");
Console.ReadKey();
// Clear annotations.
MIL.MgraClear(MIL.M_DEFAULT, GraphicList);
MIL.MgraColor(MIL.M_DEFAULT, FEATURE_COLOR);
MIL.MmetDraw(MIL.M_DEFAULT, MilMetrolResult, GraphicList, MIL.M_DRAW_FEATURE, MIL.M_DEFAULT, MIL.M_DEFAULT);
Console.Write("Calculated features:\n");
MIL.MmetGetResult(MilMetrolResult, MIL.M_FEATURE_INDEX(1), MIL.M_RADIUS, ref Value);
Console.Write("- first measured circle: radius={0:0.00}\n", Value);
MIL.MmetGetResult(MilMetrolResult, MIL.M_FEATURE_INDEX(2), MIL.M_RADIUS, ref Value);
Console.Write("- second measured circle: radius={0:0.00}\n", Value);
MIL.MmetGetResult(MilMetrolResult, MIL.M_FEATURE_INDEX(5), MIL.M_LENGTH, ref Value);
Console.Write("- constructed segment between the two circle centers: length={0:0.00}\n", Value);
MIL.MmetGetResult(MilMetrolResult, MIL.M_FEATURE_INDEX(6), MIL.M_LENGTH, ref Value);
Console.Write("- measured segment: length={0:0.00}\n", Value);
Console.Write("Press <Enter> to continue.\n\n");
Console.ReadKey();
// Get angularity tolerance status and value
MIL.MmetGetResult(MilMetrolResult, MIL.M_TOLERANCE_INDEX(0), MIL.M_STATUS, ref Status);
MIL.MmetGetResult(MilMetrolResult, MIL.M_TOLERANCE_INDEX(0), MIL.M_TOLERANCE_VALUE, ref Value);
if (Status == MIL.M_PASS)
{
MIL.MgraColor(MIL.M_DEFAULT, PASS_COLOR);
Console.Write("Perpendicularity between the two segments: {0:0.00} degrees.\n", Value);
}
else
{
MIL.MgraColor(MIL.M_DEFAULT, FAIL_COLOR);
Console.Write("Perpendicularity between the two segments - Fail.\n");
}
MIL.MmetDraw(MIL.M_DEFAULT, MilMetrolResult, GraphicList, MIL.M_DRAW_TOLERANCE, MIL.M_TOLERANCE_INDEX(0), MIL.M_DEFAULT);
Console.Write("Press <Enter> to continue.\n\n");
Console.ReadKey();
// Free all allocations.
MIL.MgraFree(GraphicList);
MIL.MmetFree(MilMetrolResult);
MIL.MmetFree(MilMetrolContext);
MIL.MbufFree(MilImage);
}
