private void button1_Click(object sender, EventArgs e)
{
double r1 = Convert.ToDouble(textBox1.Text) / 1e3;
double r2 = Convert.ToDouble(textBox2.Text) / 1e3;
double h = Convert.ToDouble(textBox3.Text) / 1e3;
SldWorks sw = new SldWorks();
sw.Visible = true;
PartDoc Part = sw.NewPart();
ModelDoc2 Model = sw.ActiveDoc;
Model.InsertSketch2(true);
Model.SelectByID("Спереди", "PLANE", 0, 0, 0); // Выделяем плоскость на которой будем рисовать
Model.InsertSketch2(true); // Добавляем эскиз
Model.CreateCircleByRadius2(0, 0, 0, r1); // рисуем окружность 1
Model.CreateCircleByRadius2(0, 0, 0, r2); // рисуем окружность 2
Model.FeatureBoss2(true, false, false,
0, 0, h, 0, true, false, true, false,
0, 0, false, false, false, false); // Бобышка - вытянуть
/*Model.CreateEllipse2(0, 0, 0, 1, 0, 0, 0, 2, 0);
* Model.FeatureBoss2(true, false, false, 0, 0, 1, 0, true, false, true, false, 0.5, 0, false, false, false, false);*/
}
public override void CreatePart()
{
swApp = SolidWorksSingleton.GetApplication();
DocumentManager.CreateNewPartDoc();
swModel = (ModelDoc2)swApp.ActiveDoc;
swFeature = swModel.FeatureByPositionReverse(3);
swFeature.Name = "Front";
swModel.Extension.SelectByID2("Front", "PLANE", 0, 0, 0, false, 0, null, 0);
swModel.InsertSketch2(true);
swModel.CreateCircleByRadius2(0, 0, 0, InsideDiameter / 2);
swModel.CreateCircleByRadius2(0, 0, 0, OutsideDiameter / 2);
swModel.InsertSketch2(true);
swFeature = swModel.FeatureManager.FeatureExtrusion3(true, false, false, 0, 0, Lenght, 0, false, false, false, false, 0, 0, false, false, false, false, false, false, false, 0, 0, false);
BasicOpertations.ChangeEntityName("FACE", MateOutsideFace, OutsideDiameter / 2, 0, Lenght / 2);
double dim = (OutsideDiameter - InsideDiameter) / 4;
BasicOpertations.ChangeEntityName("FACE", MateBase, (InsideDiameter / 2) + dim, 0, 0);
DocumentManager.Save(TargetFolder, FileName, DocumentManager.sw_DocType.part);
}
// Open "Edit Sketch" and make sketch Normal-To (ctrl+8 shortcut) given the Feature
private bool OpenSketchNormalToByName(string sketchName)
{
// Exit out of any opened sketches
if (currentModel.SketchManager.ActiveSketch != null)
{
currentModel.InsertSketch2(true);
}
ModelDocExtension swModelDocExt = default(ModelDocExtension);
swModelDocExt = currentModel.Extension;
bool selected = swModelDocExt.SelectByID2(sketchName, "SKETCH", 0, 0, 0, false, 0, null, 0);
if (!selected)
{
ShowNonFatalError("Failed to select sketch '" + sketchName + "'");
return(false);
}
// Open sketch for editing ("Edit Sketch" in Solidworks UI)
currentModel.EditSketchOrSingleSketchFeature();
// Run the 'Normal-To' view command
if (RunNormalToSketchCommand() != 0)
{
return(false);
}
return(true);
}
// (UNUSED, for future reference) Loops through all sketches in a given ModelDoc2 model
public void iterate_each_sketch_in_model(ModelDoc2 thisModel)
{
Console.WriteLine("Iterating through all sketches in this model...");
if (thisModel == null)
{
Console.WriteLine("** Error: thisModel is NULL! Something's wrong...");
}
Feature currentFeature = default(Feature);
int numParentFeatures = 0;
int numSketches = 0;
currentFeature = thisModel.IFirstFeature();
List <Feature> listOfSketches = new List <Feature>();
// Loop through all features in 'thisModel'
while (currentFeature != null)
{
numParentFeatures++;
if (currentFeature.GetTypeName2() == "ProfileFeature") // If child is type Sketch
{
// Gather properties of sketch
Console.WriteLine("Iterating through parentFeature" + numParentFeatures + " ('" + currentFeature.Name + "') in this model...");
GetConstrainedStatus(currentFeature);
// Clear all previous selections
thisModel.ClearSelection2(true);
// Select the current sketch (we verified this feature is a sketch)
if (currentFeature.Select2(false, 0))
{
Console.WriteLine("Successfully selected Sketch ('" + currentFeature.Name + "')");
listOfSketches.Add(currentFeature);
}
else
{
Console.WriteLine(" ** ERROR: Failed to select Sketch ('" + currentFeature.Name + "')");
break;
}
// Edit the (previously selected) sketch
Console.WriteLine(" Editing sketch......");
thisModel.EditSketchOrSingleSketchFeature();
// Run the 'Normal-To' view command
RunNormalToSketchCommand();
// Exit out of "Edit Sketch" and rebuild
thisModel.InsertSketch2(true);
}
currentFeature = currentFeature.GetNextFeature();
if (currentFeature == null)
{
Console.WriteLine("Failed to get next feature! (GetNextFeature() is NULL)");
}
}
Console.WriteLine("Got " + numSketches + " sketches from this model");
}
// Opens a Solidworks part, given a part TreeNode
private bool OpenPartFromNode(TreeNode partNode)
{
// Gets the current part's name (if open), to break if new part is already open
ModelDoc2 currentPart = default(ModelDoc2);
currentPart = swApp.IActiveDoc2;
string currentPartName;
if (currentPart == null)
{
currentPartName = "";
}
else
{
currentPartName = currentPart.GetTitle();
}
// Get custom PartNodeInfo object from this node
PartNodeInfo pNodeInfo = (PartNodeInfo)partNode.Tag;
string fileName = pNodeInfo.FileName;
// Exit if same part is already open
if (fileName == currentPartName)
{
Console.WriteLine("Part is already opened. Skipping PartOpen.");
currentModel = currentPart;
// Exit out of any opened sketches
if (currentModel.SketchManager.ActiveSketch != null)
{
currentModel.InsertSketch2(true);
}
return(true);
}
// Close current part and open new part
Console.WriteLine("Opening student {0}'s part file: '{1}'.", pNodeInfo.Student.Name, fileName);
CloseCurrentPart();
ModelDoc2 newPart = default(ModelDoc2);
newPart = GetSolidworksModelFromFile(pNodeInfo.FilePath);
if (newPart == null) // Opens up the new part
{
Console.WriteLine("Failed to open part file '{0}'", fileName);
return(false);
}
currentModel = newPart;
Console.WriteLine("Opened part successfully.");
ExpandAllSolidworksFeaturesInTree(newPart);
return(true);
}
private void b_create_Click(object sender, EventArgs e)
{
// Abfrage der Eingabe aus allen Textboxen.
// TryParse probiert den String in eine double-Variable zu konvertieren.
// Liefert true zurück, wenn String konvertiert werden konnte.
// Konvertierter Wert wird in Variable kopiert durch das Wort out.
if (double.TryParse(tb_breite.Text, out breite) == false ||
double.TryParse(tb_laenge.Text, out laenge) == false ||
double.TryParse(tb_hoehe.Text, out hoehe) == false) // ||
//double.TryParse(tb_radius.Text, out radius) == false)
{
MessageBox.Show("Fehlerhafte Eingabe!");
return;
}
// Werte müssen von mm in m konvertiert werden.
breite /= 1000.0;
laenge /= 1000.0;
hoehe /= 1000.0;
radius /= 1000.0;
// Anlegen eines neuen Bauteiles.
ModelDoc2 swModel = swApp.NewPart();
// Ebene oben wird selektiert und eine Skizze wird eingefügt.
swModel.Extension.SelectByID("Ebene oben", "PLANE", 0, 0, 0, false, 1, null);
swModel.InsertSketch2(true);
// Skizze wird in Feature konvertiert, damit diese benannt werden kann.
Sketch swSketch = swModel.GetActiveSketch2();
Feature swFeat = (Feature)swSketch;
swFeat.Name = "Grundflaeche";
swModel.SketchRectangle(0, 0, 0, breite, laenge, 0, true);
Feature swFeat2 = swModel.FeatureManager.FeatureExtrusion2(true, false, false, 0, 0, hoehe, 0, false, false, false, false, 0, 0,
false, false, false, false, true, true, true, 0, 0, true);
swFeat2.Name = "Quader";
swModel.SaveAsSilent("C:\\temp\\Quader_L_" + tb_laenge.Text + "_B_" + tb_breite.Text + "_H_" + tb_hoehe.Text + ".SLDPRT", true);
}
public void OnClose(int reason)
{
//This function must contain code, even if it does nothing, to prevent the
//.NET runtime environment from doing garbage collection at the wrong time.
int IndentSize;
IndentSize = System.Diagnostics.Debug.IndentSize;
System.Diagnostics.Debug.WriteLine(IndentSize);
if (reason == (int)swPropertyManagerPageCloseReasons_e.swPropertyManagerPageClose_Okay)
{
string partTemplate = iSwApp.GetUserPreferenceStringValue((int)swUserPreferenceStringValue_e.swDefaultTemplatePart);
if ((partTemplate != null) && (partTemplate != ""))
{
swModel = (ModelDoc2)iSwApp.NewDocument(partTemplate, (int)swDwgPaperSizes_e.swDwgPaperA2size, 0.0, 0.0);
swModel.InsertSketch2(true);
double x = this.activePage.CubeLength / ValueConst.factor;
double y = this.activePage.CubeWidth / ValueConst.factor;
double z = this.activePage.CubeHeight / ValueConst.factor;
swModel.SketchRectangle(0, 0, 0, x, y, 0, false);
//Extrude the sketch
IFeatureManager featMan = swModel.FeatureManager;
Feature valuebody = featMan.FeatureExtrusion(true,
false, false,
(int)swEndConditions_e.swEndCondBlind, (int)swEndConditions_e.swEndCondBlind,
z, 0.0,
false, false,
false, false,
0.0, 0.0,
false, false,
false, false,
true,
false, false);
//修改特征名称为：阀块基体
valuebody.Name = "阀块基体";
}
else
{
System.Windows.Forms.MessageBox.Show("There is no part template available. Please check your options and make sure there is a part template selected, or select a new part template.");
}
}
}
private void b_cut_Click(object sender, EventArgs e)
{
if (double.TryParse(tb_radius.Text, out radius) == false)
{
MessageBox.Show("Fehlerhafte Eingabe!");
return;
}
ModelDoc2 swModel = swApp.ActiveDoc;
swModel.Extension.SelectByID2("", "FACE", 0.5 * breite, hoehe, -0.5 * laenge, false, 1, null, 0);
swModel.InsertSketch2(true);
Sketch swSketch = (Sketch)swModel.GetActiveSketch2();
swModel.CreateCircleByRadius2(0.5 * breite, 0.5 * laenge, 0, radius);
swModel.FeatureManager.FeatureCut3(true, false, false, 1, 1, 0.0, 0.0, false, false, false, false, 0, 0, false,
false, false, false, false, true, true, false, false, false, 0, 0.0, false);
swModel.SaveAsSilent("C:\\temp\\Quader_L_" + tb_laenge.Text + "_B_" +
tb_breite.Text + "_H_" + tb_hoehe.Text + "_cut_R_" + tb_radius.Text + ".SLDPRT", true);
}
//
private void b_create_Click(object sender, EventArgs e)
{
// Deklarieren der benötigten Variablen
double a0x, a0y, lh, rg, PMax, PsiMax;
// Auslesen der eingegebenen Werte im Formular
if (double.TryParse(label_1.Text, out a0x) == false ||
double.TryParse(label_2.Text, out a0y) == false ||
double.TryParse(label_3.Text, out lh) == false ||
double.TryParse(label_4.Text, out rg) == false ||
double.TryParse(tb_pmax.Text, out PMax) == false ||
double.TryParse(label_6.Text, out PsiMax) == false)
{
MessageBox.Show("Fehlerhafte Eingabe!");
return;
}
// Erzeugen eines neuen Bauteils
ModelDoc2 swModel = (ModelDoc2)swApp.NewPart();
// Herstellen zwischen MatCAD und aktives Arbeitsblatt auslesen
Matcad.Application mcApp = (Mathcad.Application)Marshal.GetActiveObject("Mathcad.Applicaiton");
Mathcad.Worksheet mcWks = mcApp.ActiveWorksheet;
// neuer Sketch in SolidWorks
swModel.Extension.SelectByID2("Ebene vorne", "PLANE", 0, 0, 0, false, 0, null, 0);
swModel.InsertSketch2(true);
// Setzen der Parameter im MathCAD Arbeitsblatt
mcWks.SetValue("a0x", a0x);
mcWks.SetValue("a0y", a0y);
mcWks.SetValue("lh", lh);
mcWks.SetValue("rg", rg);
mcWks.SetValue("pmax", PMax);
mcWks.SetValue("psimax", PsiMax);
double xa = 0.0, ya = 0.0;
double xk, yk;
Mathcad.NumericValue mcVal;
// Schleife zur Berechnung der Stützpunkte
for (int i = 0; i < PMax; i++)
{
// Setzten des Parameters für aktuellen Stützpunkt
mcWks.SetValue("pact", i);
// Auslesen der berechneten Koordinaten aus MathCAD
mcVal = (Mathcad.NumericValue)mcWks.GetValue("X");
xk = mcVal.Real;
mcVal = (Mathcad.NumericValue)mcWks.GetValue("Y");
yk = mcVal.Real;
if (i > 0)
{
swModel.CreateLine2(xa / 1000.0, ya / 1000.0, 0, xk /
1000.0, yk / 1000.0, 0);
}
xa = xk;
ya = yk;
}
// Kreis zeichnen und extrudieren
swModel.CreateCircleByRadius2(a0x / 1000.0, a0y / 1000.0, 0.0, 3.0 / 1000.0);
swModel.FeatureManager.FeatureExtrusion2(true, false, false, 0, 0,
0.01, 0, false, false, false, false, 0, 0, false, false, false,
false, false, false, false, 0, 0, false);
}
//
private void b_createWithSpline_Click(object sender, EventArgs e)
{
double a0x, a0y, lh, rg, PMax, PsiMax;
// Auslesen der eingegebenen Werte im Formular
if (double.TryParse(tb_a0x.Text, out a0x) == false ||
double.TryParse(tb_a0y.Text, out a0y) == false ||
double.TryParse(tb_lh.Text, out lh) == false ||
double.TryParse(tb_rg.Text, out rg) == false ||
double.TryParse(tb_pmax.Text, out PMax) == false ||
double.TryParse(tb_psimax.Text, out PsiMax) == false)
{
MessageBox.Show("Fehlerhafte Eingabe!");
return;
}
// Erzeugen eines neuen Bauteils
ModelDoc2 swModel = (ModelDoc2)swApp.NewPart();
// Herstellen zwischen MatCAD und aktives Arbeitsblatt auslesen
Matcad.Application mcApp = (Mathcad.Application)Marshal.GetActiveObject("Mathcad.Applicaiton");
Mathcad.Worksheet mcWks = mcApp.ActiveWorksheet;
// neuer Sketch in SolidWorks
swModel.Extension.SelectByID2("Ebene vorne", "PLANE", 0, 0, 0, false, 0, null, 0);
swModel.InsertSketch2(true);
// Setzen der Parameter im MathCAD Arbeitsblatt
mcWks.SetValue("a0x", a0x);
mcWks.SetValue("a0y", a0y);
mcWks.SetValue("lh", lh);
mcWks.SetValue("rg", rg);
mcWks.SetValue("psimax", PsiMax);
mcWks.SetValue("pcnt", PMax);
double[] PointData = new double[(int)(PMax * 3 + 3)];
int pIndex = 0;
double xk, yk;
Mathcad.NumericValue mcVal;
// Schleife zur Berechnung der Stützpunkte
for (int i = 0; i < PMax; i++)
{
// Setzten des Parameters für aktuellen Stützpunkt
mcWks.SetValue("pact", i);
// Auslesen der berechneten Koordinaten aus MathCAD
mcVal = (Mathcad.NumericValue)mcWks.GetValue("X");
xk = mcVal.Real;
mcVal = (Mathcad.NumericValue)mcWks.GetValue("Y");
yk = mcVal.Real;
PointData[pIndex] = xk / 1000.0;
PointData[pIndex + 1] = yk / 1000.0;
PointData[pIndex + 2] = 0;
pIndex = pIndex + 3;
}
swModel.CreateSpline(PointData);
swModel.CreateCircleByRadius2(a0x / 1000.0, a0y / 1000.0, 0.0, 3.0 / 1000.0);
swModel.FeatureManager.FeatureExtrusion2(true, false, false, 0, 0,
0.01, 0, false, false, false, false, 0, 0, false, false, false,
false, false, false, false, 0, 0, false);
}
public override void CreatePart()
{
swApp = SolidWorksSingleton.GetApplication();
DocumentManager.CreateNewPartDoc();
swModel = (ModelDoc2)swApp.ActiveDoc;
swFeature = swModel.FeatureByPositionReverse(3);
swFeature.Name = "Front";
swModel.Extension.SelectByID2("Front", "PLANE", 0, 0, 0, false, 0, null, 0);
swModel.InsertSketch2(true);
swModel.CreateLine2(0, 0, 0, XLenght, 0, 0);
//swModel.AddDimension2(0,0,0);
swModel.CreateLine2(0, 0, 0, 0, YLenght, 0);
//swModel.AddDimension2(0, 0, 0);
//int markHorizontal = 2;
//int markVertical = 4;
//swModel.Extension.SelectByID2("Point1@Origin", "EXTSKETCHSEGMENT",0,0,0,false, markHorizontal|markVertical,null,0);
object datumDisp = "Point1@Origin";
swModel.SketchManager.FullyDefineSketch(true, true, (int)swSketchFullyDefineRelationType_e.swSketchFullyDefineRelationType_Vertical | (int)swSketchFullyDefineRelationType_e.swSketchFullyDefineRelationType_Horizontal, true, (int)swAutodimScheme_e.swAutodimSchemeBaseline, datumDisp, (int)swAutodimScheme_e.swAutodimSchemeBaseline, datumDisp, (int)swAutodimHorizontalPlacement_e.swAutodimHorizontalPlacementBelow, (int)swAutodimVerticalPlacement_e.swAutodimVerticalPlacementLeft);
swModel.InsertSketch2(true);
swFeature = swModel.FeatureByPositionReverse(0);
swFeature.Name = "Sketch1";
swModel.Extension.SelectByID2("Sketch1", "SKETCH", 0, 0, 0, false, 0, null, 0);
swModel.FeatureManager.InsertSheetMetalBaseFlange2(Thickness, false, Thickness, Width, 0, true, 0, 0, 0, null, false, 0, 0, 0, 0, false, false, false, false);
BasicOpertations.ChangeEntityName("FACE", MateRef1, Thickness, YLenght / 2, -Width / 2);
swModel.Extension.SelectByID2("", "FACE", XLenght / 2, Thickness, -Width / 2, false, 0, null, 0);
swModel.InsertSketch2(true);
swModel.CreateCircleByRadius2(XLenght - X1, X2, 0, BoltHoles);
swModel.CreateCircleByRadius2(XLenght - X1, Width - X2, 0, BoltHoles);
swModel.InsertSketch2(true);
swFeature = swModel.FeatureByPositionReverse(0);
swFeature.Name = "BoltHoles";
swModel.Extension.SelectByID2("BoltHoles", "SKETCH", 0, 0, 0, false, 0, null, 0);
BasicOpertations.SimpleCut();
swPart = (PartDoc)swApp.ActiveDoc;
swEntity = swPart.GetEntityByName(MateRef1, (int)swSelectType_e.swSelFACES);
swEntity.Select4(false, null);
swModel.InsertSketch2(true);
swModel.CreateCircleByRadius2(Width / 2, YLenght - (PipeHole * 2), 0, PipeHole);
swModel.AddDiameterDimension(0, 0, 0);
swModel.InsertSketch2(true);
BasicOpertations.SimpleCut();
BasicOpertations.ChangeEntityName("FACE", MateRefHole, Thickness / 2, YLenght - PipeHole, -Width / 2);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.Extension.SelectByID2("", "EDGE", XLenght, Thickness / 2, 0, false, 0, null, 0);
swModel.Extension.SelectByID2("", "EDGE", XLenght, Thickness / 2, -Width, true, 0, null, 0);
BasicOpertations.SimpleFillet(Rad2);
swModel.Extension.SelectByID2("", "EDGE", Thickness / 2, YLenght, 0, false, 0, null, 0);
swModel.Extension.SelectByID2("", "EDGE", Thickness / 2, YLenght, -Width, true, 0, null, 0);
BasicOpertations.SimpleFillet(Rad1);
swModel.ClearSelection2(true);
swModel.ViewZoomtofit2();
DocumentManager.Save(TargetFolder, FileName, DocumentManager.sw_DocType.part);
}
private void button_create_Geom_Click(object sender, RoutedEventArgs e)
{
#region a test example, not important
m = 9;
width = 8 / 1000.0;
thickness = 1 / 1000.0;
l1 = 30 / 1000.0;
l2 = 16 / 1000.0;
l3 = 21 / 1000.0;
F1 = 1;
F2 = 37;
F3 = 49;
l4 = l2;
l1_ = l1 - 2 * width;
l2_ = l2;
l3_ = l3 + 2 * width;
l4_ = l4;
cell_length = l1 + l3;
cell_height = l2 + width;
#endregion
Count = int.Parse(textBox_count.Text);
Random randomSeed = new Random();
Random random_m = new Random(randomSeed.Next());
Random random_width = new Random(randomSeed.Next());
Random random_thickness = new Random(randomSeed.Next());
Random random_l1 = new Random(randomSeed.Next());
Random random_l2 = new Random(randomSeed.Next());
Random random_l3 = new Random(randomSeed.Next());
Random random_F1 = new Random(randomSeed.Next());
Random random_F2 = new Random(randomSeed.Next());
Random random_F3 = new Random(randomSeed.Next());
for (int j = 0; j < Count; j++)
{
Console.WriteLine(string.Format("---------------------------------now No.{0}", j));
#region generate random Data
try
{
/* change to double
* ran_m = random_m.Next(int.Parse(textBox_hm_cells_min.Text), int.Parse(textBox_hm_cellls_max.Text));
* ran_width = random_width.Next(int.Parse(textBox_width_min.Text), int.Parse(textBox_width_max.Text));
* ran_thickness = random_thickness.Next(int.Parse(textBox_thickness_min.Text), int.Parse(textBox_thickness_max.Text));
* ran_l1 = random_l1.Next(int.Parse(textBox_l1_min.Text), int.Parse(textBox_l1_max.Text));
* ran_l2 = random_l2.Next(int.Parse(textBox_l2_min.Text), int.Parse(textBox_l2_max.Text));
* ran_l3 = random_l3.Next(int.Parse(textBox_l3_min.Text), int.Parse(textBox_l3_max.Text));
* ran_F1 = random_F1.Next(int.Parse(textBox_F1_min.Text), int.Parse(textBox_F1_max.Text));
* ran_F2 = random_F2.Next(int.Parse(textBox_F2_min.Text), int.Parse(textBox_F2_max.Text));
* ran_F3 = random_F3.Next(int.Parse(textBox_F3_min.Text), int.Parse(textBox_F3_max.Text));
*/
ran_m = random_m.Next(int.Parse(textBox_hm_cells_min.Text), int.Parse(textBox_hm_cellls_max.Text));
ran_width = random_width.NextDouble() * (int.Parse(textBox_width_max.Text) - int.Parse(textBox_width_min.Text)) + double.Parse(textBox_width_min.Text);
ran_thickness = random_thickness.NextDouble() * (int.Parse(textBox_thickness_max.Text) - int.Parse(textBox_thickness_min.Text)) + double.Parse(textBox_thickness_min.Text);
ran_l1 = random_l1.NextDouble() * (int.Parse(textBox_l1_max.Text) - int.Parse(textBox_l1_min.Text)) + double.Parse(textBox_l1_min.Text);
ran_l2 = random_l2.NextDouble() * (int.Parse(textBox_l2_max.Text) - int.Parse(textBox_l2_min.Text)) + double.Parse(textBox_l2_min.Text);
ran_l3 = random_l3.NextDouble() * (int.Parse(textBox_l3_max.Text) - int.Parse(textBox_l3_min.Text)) + double.Parse(textBox_l3_min.Text);
ran_F1 = random_F1.NextDouble() * (int.Parse(textBox_F1_max.Text) - int.Parse(textBox_F1_min.Text)) + double.Parse(textBox_F1_min.Text);
ran_F2 = random_F2.NextDouble() * (int.Parse(textBox_F2_max.Text) - int.Parse(textBox_F2_min.Text)) + double.Parse(textBox_F2_min.Text);
ran_F3 = random_F3.NextDouble() * (int.Parse(textBox_F3_max.Text) - int.Parse(textBox_F3_min.Text)) + double.Parse(textBox_F3_min.Text);
}
catch (Exception)
{
Console.WriteLine("Input Format Error");
return;
}
m = ran_m;
width = (double)(ran_width / 1000.0);
thickness = (double)(ran_thickness / 1000.0);
l1 = (double)(ran_l1 / 1000.0);
l2 = (double)(ran_l2 / 1000.0);
l3 = (double)(ran_l3 / 1000.0);
F1 = (double)ran_F1;
F2 = (double)ran_F2;
F3 = (double)ran_F3;
F3 = 0;
l4 = l2;
l1_ = l1 - 2 * width;
l2_ = l2;
l3_ = l3 + 2 * width;
l4_ = l4;
cell_length = l1 + l3;
cell_height = l2 + width;
#endregion
Console.WriteLine(string.Format("{0},{1},{2},{3},{4},{5}", m, width, thickness, l1, l2, l3));
#region geometrie
Console.WriteLine("Start creating new Germetrie");
try
{
swModel = swApp.NewPart();
}
catch (Exception)
{
Console.WriteLine("starting SolidWorks");
try
{
swApp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
}
catch (Exception)
{
swApp = new SldWorks();
swApp.Visible = false;
}
//get MaterialLib
strMaterialLib = swApp.GetExecutablePath() + "\\lang\\english\\sldmaterials\\solidworks materials.sldmat";
Console.WriteLine("SolidWorks successfully started");
j--;
continue;
}
swModel.Extension.SelectByID("前视基准面", "PLANE", 0, 0, 0, false, 1, null);
swModel.InsertSketch2(true);
#region sketch
for (int i = 0; i < m; i++)
{
if (i == 0)
{
swModel.SketchManager.CreateLine(0, 0, 0, l1 - width, 0, 0);
swModel.SketchManager.CreateLine(l1 - width, 0, 0, l1 - width, -l2, 0);
swModel.SketchManager.CreateLine(l1 - width, -l2, 0, l1 + l3 - width, -l2, 0);
swModel.SketchManager.CreateLine(l1 + l3 - width, -l2, 0, l1 + l3 - width, 0, 0);
swModel.SketchManager.CreateLine(0, 0, 0, 0, -width, 0);
swModel.SketchManager.CreateLine(0, -width, 0, l1_, -width, 0);
swModel.SketchManager.CreateLine(l1_, -width, 0, l1_, -(width + l2_), 0);
swModel.SketchManager.CreateLine(l1_, -(width + l2_), 0, l1_ + l3_, -(width + l2_), 0);
swModel.SketchManager.CreateLine(l1_ + l3_, -(width + l2_), 0, l1_ + l3_, -width, 0);
}
else
{
x_o = i * cell_length - width;
y_o = 0;
x_o_ = x_o + width;
y_o_ = y_o - width;
swModel.SketchManager.CreateLine(x_o, y_o, 0, x_o + l1, 0, 0);
swModel.SketchManager.CreateLine(x_o + l1, 0, 0, x_o + l1, -l2, 0);
swModel.SketchManager.CreateLine(x_o + l1, -l2, 0, x_o + l1 + l3, -l2, 0);
swModel.SketchManager.CreateLine(x_o + l1 + l3, -l2, 0, x_o + l1 + l3, 0, 0);
swModel.SketchManager.CreateLine(x_o_, y_o_, 0, x_o_ + l1_, y_o_, 0);
swModel.SketchManager.CreateLine(x_o_ + l1_, y_o_, 0, x_o_ + l1_, y_o_ - l2_, 0);
swModel.SketchManager.CreateLine(x_o_ + l1_, y_o_ - l2_, 0, x_o_ + l1_ + l3_, y_o_ - l2_, 0);
swModel.SketchManager.CreateLine(x_o_ + l1_ + l3_, y_o_ - l2_, 0, x_o_ + l1_ + l3_, y_o_, 0);
}
}
swModel.SketchManager.CreateLine(x_o_ + l1_ + l3_, y_o_, 0, x_o_ + l1_ + l3_, 0, 0);
swModel.SketchManager.CreateLine(x_o_ + l1_ + l3_, 0, 0, x_o + l1 + l3, 0, 0);
#endregion
swModel.FeatureManager.FeatureExtrusion2(
true, false, false, 0, 0, thickness, 0, false, false, false, false, 0, 0, false, false, false, false, true, true, true, 0, 0, true
);
swModel.SaveAsSilent("D:\\TUD\\7.Semeter\\SA\\SA_code\\c#\\W_Form_analyse_get_TrainingDaten\\Geometrie.sldprt", true);
swApp.CloseAllDocuments(true);
swApp.OpenDoc("D:\\TUD\\7.Semeter\\SA\\SA_code\\c#\\W_Form_analyse_get_TrainingDaten\\Geometrie.sldprt", (int)swOpenDocOptions_e.swOpenDocOptions_Silent);
Console.WriteLine("Geometrie success");
#endregion
#region simulaiton
string path_to_cosworks_dll = @"C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\Simulation\cosworks.dll";
errors = swApp.LoadAddIn(path_to_cosworks_dll);
COSMOSObject = (CwAddincallback)swApp.GetAddInObject("SldWorks.Simulation");
try
{
COSMOSWORKS = (CosmosWorks)COSMOSObject.CosmosWorks;
}
catch (Exception)
{
Console.WriteLine("something wrong in Simulaiton Add In, start a new one");
continue;
}
COSMOSWORKS = COSMOSObject.CosmosWorks;
//Get active document
ActDoc = (CWModelDoc)COSMOSWORKS.ActiveDoc;
//Create new static study
StudyMngr = (CWStudyManager)ActDoc.StudyManager;
Study = (CWStudy)StudyMngr.CreateNewStudy("static study", (int)swsAnalysisStudyType_e.swsAnalysisStudyTypeStatic, 0, out errCode);
//Add materials
SolidMgr = Study.SolidManager;
SolidComp = SolidMgr.GetComponentAt(0, out errCode);
SolidBody = SolidComp.GetSolidBodyAt(0, out errCode);
intStatus = SolidBody.SetLibraryMaterial(strMaterialLib, "AISI 1020");
//fixed restraints
LBCMgr = Study.LoadsAndRestraintsManager;
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.ShowNamedView2("", (int)swStandardViews_e.swIsometricView);
selectionMgr = (SelectionMgr)swModel.SelectionManager;
isSelected = swModel.Extension.SelectByID2("", "FACE", 0, -width / 2.0, thickness / 2.0, false, 0, null, 0);
if (isSelected)
{
object selectedFace = (object)selectionMgr.GetSelectedObject6(1, -1);
object[] fixedFaces = { selectedFace };
CWRestraint restraint = (CWRestraint)LBCMgr.AddRestraint((int)swsRestraintType_e.swsRestraintTypeFixed, fixedFaces, null, out errCode);
}
swModel.ClearSelection2(true);
//add force
selectionMgr = (SelectionMgr)swModel.SelectionManager;
isSelected = swModel.Extension.SelectByID2("", "FACE", x_o + l1 + l3 + (width / 2.0), 0, thickness / 2.0, false, 0, null, 0);
if (isSelected)
{
object selectedFace = (object)selectionMgr.GetSelectedObject6(1, -1);
object[] forceAdd = { selectedFace };
selectionMgr = (SelectionMgr)swModel.SelectionManager;
swModel.Extension.SelectByID2("", "FACE", x_o + l1 + l3 + width, -(l4 + width) / 2.0, thickness / 2.0, false, 0, null, 0);
object selectedFaceToForceDir = (object)selectionMgr.GetSelectedObject6(1, -1);
double[] distValue = null;
double[] forceValue = null;
double[] Force = { F2, F3, F1 };
cwForce = (CWForce)LBCMgr.AddForce3((int)swsForceType_e.swsForceTypeForceOrMoment, (int)swsSelectionType_e.swsSelectionFaceEdgeVertexPoint,
2, 0, 0, 0,
(distValue),
(forceValue),
false, true,
(int)swsBeamNonUniformLoadDef_e.swsTotalLoad,
0, 7, 0.0,
Force,
false, false,
(forceAdd),
(selectedFaceToForceDir),
false, out errCode); //i have tried to figure out these arguments for one day, keep them and dont't change them.
//the way to check cwForce : cwForce.GetForceComponentValues()
//ForceComponet: [int b1, // 1 if x-direction hat Force-komponent, else 0
// int b2, // 1 if y-direction hat Force-komponent, else 0
// int b3, // 1 if z-direction hat Force-komponent, else 0
// double d1, // Force-komponent in x
// double d2, // Force-komponent in y
// double d3 // Force-komponent in z
// ]
//PS: the definition of xyz seems like not the same as the global XYZ system in SW.
swModel.ClearSelection2(true);
//meshing
CWMesh CWMeshObj = default(CWMesh);
CWMeshObj = Study.Mesh;
CWMeshObj.MesherType = (int)swsMesherType_e.swsMesherTypeStandard;
CWMeshObj.Quality = (int)swsMeshQuality_e.swsMeshQualityDraft;
errCode = Study.CreateMesh(0, MeshEleSize, MeshTol);
CWMeshObj = null;
//run analysis
errCode = Study.RunAnalysis();
if (errCode != 0)
{
Console.WriteLine(string.Format("RunAnalysis errCode = {0}", errCode));
Console.WriteLine(string.Format("RunAnalysis failed"));
swApp.CloseAllDocuments(true);
errors = swApp.UnloadAddIn(path_to_cosworks_dll);
Console.WriteLine(string.Format("ready to start a new one"));
continue;
}
Console.WriteLine("RunAnalysis successed, ready to get results");
//get results
CWFeatobj = Study.Results;
//get max von Mieses stress
Stress = (object[])CWFeatobj.GetMinMaxStress((int)swsStressComponent_e.swsStressComponentVON,
0, 0, null,
(int)swsStrengthUnit_e.swsStrengthUnitNewtonPerSquareMillimeter,
out errCode);
maxStress = (float)Stress[3]; //Stress: {node_with_minimum_stress, minimum_stress, node_with_maximum_stress, maximum_stress}
Console.WriteLine(maxStress);
/*
* if (maxStress >= 351.6)
* {
* Console.WriteLine("out of yield stress, start a new example");
* errors = swApp.UnloadAddIn(path_to_cosworks_dll);
* swApp.CloseAllDocuments(true);
* j--;
* continue;
* }
*/
//get max URES displacement
Disp = (object[])CWFeatobj.GetMinMaxDisplacement((int)swsDisplacementComponent_e.swsDisplacementComponentURES,
0, null,
(int)swsLinearUnit_e.swsLinearUnitMillimeters,
out errCode);
maxDisp = (float)Disp[3]; //Disp: {node_with_minimum_displacement, minimum_displacement, node_with_maximum_displacement, maximum_displacement}
CWFeatobj = null;
Console.WriteLine(string.Format("max Displacement: {0:f4} mm", maxDisp));
//output to Excel
exlSheet.Cells[j + 2, 1] = m;
exlSheet.Cells[j + 2, 2] = width * 1000;
exlSheet.Cells[j + 2, 3] = thickness * 1000;
exlSheet.Cells[j + 2, 4] = l1 * 1000;
exlSheet.Cells[j + 2, 5] = l2 * 1000;
exlSheet.Cells[j + 2, 6] = l3 * 1000;
exlSheet.Cells[j + 2, 7] = F1;
exlSheet.Cells[j + 2, 8] = F2;
exlSheet.Cells[j + 2, 9] = F3;
exlSheet.Cells[j + 2, 10] = maxStress;
exlSheet.Cells[j + 2, 11] = maxDisp;
if (j % 5 == 0)
{
exlBook.Save();//C:\Users\Zhao\Documents\工作簿1.xlsx
}
errors = swApp.UnloadAddIn(path_to_cosworks_dll);
swApp.CloseAllDocuments(true);
}
#endregion
}
exlBook.SaveCopyAs("D:\\TUD\\7.Semeter\\SA\\SA_code\\c#\\W_Form_analyse_get_TrainingDaten\\W_Form_simulationDaten_" + GetTimeStamp() + "_F3=0" + ".xlsx");
exlBook.Save();//C:\Users\zhaojie\Documents\工作簿1.xlsx
exlApp.Quit();
}
public void CreateHeaterCenter(string heaterPathName)
{
ISketchPoint startPoint = null;
ISketchPoint endPoint = null;
List <SegmentData> list = new List <SegmentData>();
List <SegmentData> list2 = new List <SegmentData>();
List <SegmentData> list3 = new List <SegmentData>();
List <SegmentData> list4 = new List <SegmentData>();
_swApp.ActivateDoc(_swPartModel.GetTitle());
_swPartModel.ShowNamedView2("*Front", 1);
ISketchArc arc;
double length;
list2.Clear();
list.Clear();
_swPartModel.Extension.SelectByID2(heaterPathName, "SKETCH", 0.0, 0.0, 0.0, true, 0, null, 0);
_swPartModel.ViewZoomToSelection();
ISelectionMgr iSelectionManager = _swPartModel.ISelectionManager;
IFeature feature = iSelectionManager.GetSelectedObject6(1, 0);
ISketch sketch = feature.GetSpecificFeature2();
Array array = sketch.GetSketchSegments();
Array array2 = sketch.GetSketchPoints2();
foreach (ISketchSegment segment in array)
{
ISketchSegment segment2 = segment;
segment2.Select(true);
if (!segment2.ConstructionGeometry)
{
if (segment2.GetType() == 0)
{
ISketchLine line = (ISketchLine)segment2;
startPoint = line.IGetStartPoint2();
endPoint = line.IGetEndPoint2();
}
if (segment2.GetType() == 1)
{
arc = (ISketchArc)segment2;
startPoint = arc.IGetStartPoint2();
endPoint = arc.IGetEndPoint2();
}
SegmentData item = new SegmentData(segment2, startPoint, endPoint);
list.Add(item);
}
_swPartModel.ClearSelection2(true);
}
for (int i = 0; i < list.Count; i++)
{
int num9 = 0;
list2.Add(list[0]);
list.Remove(list[0]);
for (int m = 0; m < list.Count; m++)
{
list2[0].Segment.Select(false);
list[m].Segment.Select(false);
if ((Math.Round(list2[0].StartPoint.X, 5) == Math.Round(list[m].StartPoint.X, 5)) && (Math.Round(list2[0].StartPoint.Y, 5) == Math.Round(list[m].StartPoint.Y, 5)))
{
num9++;
}
if ((Math.Round(list2[0].EndPoint.X, 5) == Math.Round(list[m].EndPoint.X, 5)) && (Math.Round(list2[0].EndPoint.Y, 5) == Math.Round(list[m].EndPoint.Y, 5)))
{
num9++;
}
if ((Math.Round(list2[0].EndPoint.X, 5) == Math.Round(list[m].StartPoint.X, 5)) && (Math.Round(list2[0].EndPoint.Y, 5) == Math.Round(list[m].StartPoint.Y, 5)))
{
num9++;
}
if ((Math.Round(list2[0].StartPoint.X, 5) == Math.Round(list[m].EndPoint.X, 5)) && (Math.Round(list2[0].StartPoint.Y, 5) == Math.Round(list[m].EndPoint.Y, 5)))
{
num9++;
}
_swPartModel.ClearSelection2(true);
if (num9 == 2)
{
list.Add(list2[0]);
list2.Remove(list2[0]);
break;
}
}
if (num9 == 1)
{
list2[0].Segment.Select(true);
break;
}
}
int num = 0;
for (int j = 0; j < list.Count; j++)
{
list2[num].Segment.Select(true);
list[j].Segment.Select(false);
if ((Math.Round(list2[num].StartPoint.X, 5) == Math.Round(list[j].StartPoint.X, 5)) && (Math.Round(list2[num].StartPoint.Y, 5) == Math.Round(list[j].StartPoint.Y, 5)))
{
list2.Add(list[j]);
list.Remove(list[j]);
num++;
j = -1;
}
else if ((Math.Round(list2[num].EndPoint.X, 5) == Math.Round(list[j].EndPoint.X, 5)) && (Math.Round(list2[num].EndPoint.Y, 5) == Math.Round(list[j].EndPoint.Y, 5)))
{
list2.Add(list[j]);
list.Remove(list[j]);
num++;
j = -1;
}
else if ((Math.Round(list2[num].EndPoint.X, 5) == Math.Round(list[j].StartPoint.X, 5)) && (Math.Round(list2[num].EndPoint.Y, 5) == Math.Round(list[j].StartPoint.Y, 5)))
{
list2.Add(list[j]);
list.Remove(list[j]);
num++;
j = -1;
}
else if ((Math.Round(list2[num].StartPoint.X, 5) == Math.Round(list[j].EndPoint.X, 5)) && (Math.Round(list2[num].StartPoint.Y, 5) == Math.Round(list[j].EndPoint.Y, 5)))
{
list2.Add(list[j]);
list.Remove(list[j]);
num++;
j = -1;
}
}
_swPartModel.ClearSelection();
_swPartModel.Extension.SelectByID2(heaterPathName, "SKETCH", 0.0, 0.0, 0.0, false, 0, null, 0);
_swPartModel.EditSketch();
foreach (ISketchPoint point3 in array2)
{
point3.Select(false);
if (point3.Type == 1)
{
_swPartModel.EditDelete();
}
}
double num2 = 0.0;
foreach (SegmentData data2 in list2)
{
data2.Segment.Select(false);
length = data2.Segment.GetLength();
num2 += length;
}
_swPartModel.ClearSelection();
double num4 = num2 / 2.0;
length = 0.0;
int num5 = 0;
double num6 = 0.0;
for (int k = 0; k < list2.Count; k++)
{
list2[k].Segment.Select(false);
length += list2[k].Segment.GetLength();
if (num4 < length)
{
num5 = k;
double num7 = Math.Abs((double)(length - num4));
num6 = (list2[num5].Segment.GetLength() - num7) / list2[num5].Segment.GetLength();
break;
}
}
_swPartModel.ClearSelection();
if (list2[num5].Segment.GetType() == 0)
{
double num13 = 0.0;
double x = list2[num5].StartPoint.X;
double y = list2[num5].StartPoint.Y;
double num16 = list2[num5].EndPoint.X;
double num17 = list2[num5].EndPoint.Y;
if ((Math.Round(num16, 6) == Math.Round(list2[num5 - 1].StartPoint.X, 6)) && (Math.Round(num17, 6) == Math.Round(list2[num5 - 1].StartPoint.Y, 6)))
{
num16 = list2[num5].StartPoint.X;
num17 = list2[num5].StartPoint.Y;
x = list2[num5].EndPoint.X;
y = list2[num5].EndPoint.Y;
}
else if ((Math.Round(num16, 6) == Math.Round(list2[num5 - 1].EndPoint.X, 6)) && (Math.Round(num17, 6) == Math.Round(list2[num5 - 1].EndPoint.Y, 6)))
{
num16 = list2[num5].StartPoint.X;
num17 = list2[num5].StartPoint.Y;
x = list2[num5].EndPoint.X;
y = list2[num5].EndPoint.Y;
}
double pointX = x + ((num16 - x) * num6);
double pointY = y + ((num17 - y) * num6);
_swPartModel.SetAddToDB(true);
if (_swPartModel.CreatePoint2(pointX, pointY, 0.0) != null)
{
_swPartModel.SketchAddConstraints("sgFixed");
}
if (x == num16)
{
num13 = 1.5707963267948966;
}
if (y == num17)
{
num13 = 3.1415926535897931;
}
if ((x != num16) && !(y == num17))
{
num13 = Math.Atan((num17 - y) / (num16 - x));
}
if (num13 > 3.1415926535897931)
{
num13 -= 3.1415926535897931;
}
ISketchSegment segment3 = _swPartModel.ICreateLine2(pointX + (0.005 * Math.Cos(num13 + 1.5707963267948966)), pointY + (0.005 * Math.Sin(num13 + 1.5707963267948966)), 0.0, pointX + (0.005 * Math.Cos(num13 + 4.71238898038469)), pointY + (0.005 * Math.Sin(num13 + 4.71238898038469)), 0.0);
_swPartModel.SketchAddConstraints("sgFIXED");
segment3.ConstructionGeometry = true;
_swPartModel.SetAddToDB(false);
_swPartModel.ClearSelection2(true);
_swPartModel.InsertSketch2(true);
}
if (list2[num5].Segment.GetType() == 1)
{
arc = (ISketchArc)list2[num5].Segment;
startPoint = arc.IGetStartPoint2();
endPoint = arc.IGetEndPoint2();
ISketchPoint point4 = arc.IGetCenterPoint2();
int rotationDir = arc.GetRotationDir();
double num21 = 0.0;
double num22 = 0.0;
double num23 = list2[num5].Segment.GetLength();
double radius = arc.GetRadius();
double num25 = (num6 * num23) / radius;
double num26 = startPoint.X;
double num27 = startPoint.Y;
double num28 = endPoint.X;
double num29 = endPoint.Y;
double num30 = point4.X;
double num31 = point4.Y;
if ((Math.Round(num28, 6) == Math.Round(list2[num5 - 1].StartPoint.X, 6)) && (Math.Round(num29, 6) == Math.Round(list2[num5 - 1].StartPoint.Y, 6)))
{
num26 = endPoint.X;
num27 = endPoint.Y;
rotationDir = -1 * rotationDir;
}
else if ((Math.Round(num28, 6) == Math.Round(list2[num5 - 1].EndPoint.X, 6)) && (Math.Round(num29, 6) == Math.Round(list2[num5 - 1].EndPoint.Y, 6)))
{
num26 = endPoint.X;
num27 = endPoint.Y;
rotationDir = -1 * rotationDir;
}
if ((num30 != num26) && !(num31 == num27))
{
num21 = Math.Atan((num31 - num27) / (num30 - num26));
}
if (Math.Round(num30, 8) == Math.Round(num26, 8))
{
if (Math.Round(num31, 8) > Math.Round(num27, 8))
{
num21 = 4.71238898038469;
}
else if (Math.Round(num31, 8) < Math.Round(num27, 8))
{
num21 = 1.5707963267948966;
}
}
else if (Math.Round(num31, 8) == Math.Round(num27, 8))
{
if (Math.Round(num30, 8) > Math.Round(num26, 8))
{
num21 = 3.1415926535897931;
}
else if (Math.Round(num30, 8) < Math.Round(num26, 8))
{
if (rotationDir > 0)
{
num21 = 0.0;
}
else
{
num21 = 6.2831853071795862;
}
}
}
if ((Math.Round(num30, 8) < Math.Round(num26, 8)) && (Math.Round(num31, 8) < Math.Round(num27, 8)))
{
num22 = num21 + (rotationDir * num25);
}
else if ((Math.Round(num30, 8) < Math.Round(num26, 8)) && (Math.Round(num31, 8) > Math.Round(num27, 8)))
{
num22 = (6.2831853071795862 + num21) + (rotationDir * num25);
}
else if ((Math.Round(num30, 8) > Math.Round(num26, 8)) && (Math.Round(num31, 8) > Math.Round(num27, 8)))
{
num22 = (3.1415926535897931 + num21) + (rotationDir * num25);
}
else if ((Math.Round(num30, 8) > Math.Round(num26, 8)) && (Math.Round(num31, 8) < Math.Round(num27, 8)))
{
num22 = (3.1415926535897931 + num21) + (rotationDir * num25);
}
else if (Math.Round(num30, 8) == Math.Round(num26, 8))
{
num22 = num21 + (rotationDir * num25);
}
else if (Math.Round(num31, 8) == Math.Round(num27, 8))
{
num22 = num21 + (rotationDir * num25);
}
num22 = Math.Round(num22, 6);
double num32 = num30 + (radius * Math.Cos(num22));
double num33 = num31 + (radius * Math.Sin(num22));
bool flag29 = true;
if (_swPartModel.Extension.SelectByID2("", "SKETCHPOINT", num32, num33, 0.0, false, 0, null, 0))
{
ISketchPoint point5 = iSelectionManager.GetSelectedObject6(0, 1);
if ((point5 != null) && ((Math.Round(point5.X, 6) == Math.Round(num32, 6)) && (Math.Round(point5.Y, 6) == Math.Round(num33, 6))))
{
flag29 = false;
}
}
_swPartModel.SetAddToDB(true);
if (flag29 && (_swPartModel.CreatePoint2(num32, num33, 0.0) != null))
{
_swPartModel.SketchAddConstraints("sgFIXED");
_swPartModel.ICreateLine2(num30, num31, 0.0, num32, num33, 0.0).ConstructionGeometry = true;
}
_swPartModel.SetAddToDB(false);
_swPartModel.ClearSelection2(true);
_swPartModel.InsertSketch2(true);
}
}
private void Button_generateFEM_Click(object sender, RoutedEventArgs e)
{
#region Variable definition
int m; //how many cells
int Count; // how many data
double width, thickness, l1, l2, l3, F1, F2, F3;
double l4, l1_, l2_, l3_, l4_, cell_length, cell_height;
double x_o = 0.0;
double y_o = 0.0;
double x_o_ = 0.0;
double y_o_ = 0.0;
const double MeshEleSize = 2.0;
const double MeshTol = 0.1;
string strMaterialLib = null;
object[] Disp = null;
object[] Stress = null;
ModelDoc2 swModel = null;
SelectionMgr selectionMgr = null;
CosmosWorks COSMOSWORKS = null;
CwAddincallback COSMOSObject = default(CwAddincallback);
CWModelDoc ActDoc = default(CWModelDoc);
CWStudyManager StudyMngr = default(CWStudyManager);
CWStudy Study = default(CWStudy);
CWSolidManager SolidMgr = default(CWSolidManager);
CWSolidBody SolidBody = default(CWSolidBody);
CWSolidComponent SolidComp = default(CWSolidComponent);
CWForce cwForce = default(CWForce);
CWLoadsAndRestraintsManager LBCMgr = default(CWLoadsAndRestraintsManager);
CWResults CWFeatobj = default(CWResults);
bool isSelected;
float maxDisp = 0.0f;
float maxStress = 0.0f;
int intStatus = 0;
int errors = 0;
int errCode = 0;
int warnings = 0;
int ran_m, ran_width, ran_thickness, ran_l1, ran_l2, ran_l3, ran_F1, ran_F2, ran_F3;
Excel.Application exlApp;
Excel.Workbook exlBook;
Excel.Worksheet exlSheet;
#endregion
#region read data from UI
try
{
m = int.Parse(textBox_hm_cells.Text);
width = double.Parse(textBox_width.Text) / 1000.0;
thickness = double.Parse(textBox_thickness.Text) / 1000.0;
l1 = double.Parse(textBox_l1.Text) / 1000.0;
l2 = double.Parse(textBox_l2.Text) / 1000.0;
l3 = double.Parse(textBox_l3.Text) / 1000.0;
F1 = double.Parse(textBox_F1.Text);
F2 = double.Parse(textBox_F2.Text);
F3 = double.Parse(textBox_F3.Text);
}
catch (Exception)
{
MessageBox.Show("input format error, check input data");
return;
}
l4 = l2;
l1_ = l1 - 2 * width;
l2_ = l2;
l3_ = l3 + 2 * width;
l4_ = l4;
cell_length = l1 + l3;
cell_height = l2 + width;
#endregion
#region geometrie
Console.WriteLine("Start creating new Germetrie");
swModel = swApp.NewPart();
swModel.Extension.SelectByID("前视基准面", "PLANE", 0, 0, 0, false, 1, null);
swModel.InsertSketch2(true);
#region sketch
for (int i = 0; i < m; i++)
{
if (i == 0)
{
swModel.SketchManager.CreateLine(0, 0, 0, l1 - width, 0, 0);
swModel.SketchManager.CreateLine(l1 - width, 0, 0, l1 - width, -l2, 0);
swModel.SketchManager.CreateLine(l1 - width, -l2, 0, l1 + l3 - width, -l2, 0);
swModel.SketchManager.CreateLine(l1 + l3 - width, -l2, 0, l1 + l3 - width, 0, 0);
swModel.SketchManager.CreateLine(0, 0, 0, 0, -width, 0);
swModel.SketchManager.CreateLine(0, -width, 0, l1_, -width, 0);
swModel.SketchManager.CreateLine(l1_, -width, 0, l1_, -(width + l2_), 0);
swModel.SketchManager.CreateLine(l1_, -(width + l2_), 0, l1_ + l3_, -(width + l2_), 0);
swModel.SketchManager.CreateLine(l1_ + l3_, -(width + l2_), 0, l1_ + l3_, -width, 0);
}
else
{
x_o = i * cell_length - width;
y_o = 0;
x_o_ = x_o + width;
y_o_ = y_o - width;
swModel.SketchManager.CreateLine(x_o, y_o, 0, x_o + l1, 0, 0);
swModel.SketchManager.CreateLine(x_o + l1, 0, 0, x_o + l1, -l2, 0);
swModel.SketchManager.CreateLine(x_o + l1, -l2, 0, x_o + l1 + l3, -l2, 0);
swModel.SketchManager.CreateLine(x_o + l1 + l3, -l2, 0, x_o + l1 + l3, 0, 0);
swModel.SketchManager.CreateLine(x_o_, y_o_, 0, x_o_ + l1_, y_o_, 0);
swModel.SketchManager.CreateLine(x_o_ + l1_, y_o_, 0, x_o_ + l1_, y_o_ - l2_, 0);
swModel.SketchManager.CreateLine(x_o_ + l1_, y_o_ - l2_, 0, x_o_ + l1_ + l3_, y_o_ - l2_, 0);
swModel.SketchManager.CreateLine(x_o_ + l1_ + l3_, y_o_ - l2_, 0, x_o_ + l1_ + l3_, y_o_, 0);
}
}
swModel.SketchManager.CreateLine(x_o_ + l1_ + l3_, y_o_, 0, x_o_ + l1_ + l3_, 0, 0);
swModel.SketchManager.CreateLine(x_o_ + l1_ + l3_, 0, 0, x_o + l1 + l3, 0, 0);
#endregion
swModel.FeatureManager.FeatureExtrusion2(
true, false, false, 0, 0, thickness, 0, false, false, false, false, 0, 0, false, false, false, false, true, true, true, 0, 0, true
);
swModel.SaveAsSilent("D:\\TUD\\7.Semeter\\SA\\SA_code\\c#\\W_Form_analyse_FEM_NN_GUI\\Geometrie.sldprt", true);
swApp.CloseAllDocuments(true);
swApp.OpenDoc("D:\\TUD\\7.Semeter\\SA\\SA_code\\c#\\W_Form_analyse_FEM_NN_GUI\\Geometrie.sldprt", (int)swOpenDocOptions_e.swOpenDocOptions_Silent);
Console.WriteLine("Geometrie success");
#endregion
#region simulaiton
string path_to_cosworks_dll = @"C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\Simulation\cosworks.dll";
errors = swApp.LoadAddIn(path_to_cosworks_dll);
COSMOSObject = (CwAddincallback)swApp.GetAddInObject("SldWorks.Simulation");
try
{
COSMOSWORKS = (CosmosWorks)COSMOSObject.CosmosWorks;
}
catch (Exception)
{
Console.WriteLine("something wrong in Simulaiton Add In, start a new one");
swApp.CloseAllDocuments(true);
return;
}
COSMOSWORKS = COSMOSObject.CosmosWorks;
//Get active document
ActDoc = (CWModelDoc)COSMOSWORKS.ActiveDoc;
//Create new static study
StudyMngr = (CWStudyManager)ActDoc.StudyManager;
Study = (CWStudy)StudyMngr.CreateNewStudy("static study", (int)swsAnalysisStudyType_e.swsAnalysisStudyTypeStatic, 0, out errCode);
//Add materials
//get MaterialLib
strMaterialLib = swApp.GetExecutablePath() + "\\lang\\english\\sldmaterials\\solidworks materials.sldmat";
SolidMgr = Study.SolidManager;
SolidComp = SolidMgr.GetComponentAt(0, out errCode);
SolidBody = SolidComp.GetSolidBodyAt(0, out errCode);
intStatus = SolidBody.SetLibraryMaterial(strMaterialLib, "AISI 1020");
//fixed restraints
LBCMgr = Study.LoadsAndRestraintsManager;
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.ShowNamedView2("", (int)swStandardViews_e.swIsometricView);
selectionMgr = (SelectionMgr)swModel.SelectionManager;
isSelected = swModel.Extension.SelectByID2("", "FACE", 0, -width / 2.0, thickness / 2.0, false, 0, null, 0);
if (isSelected)
{
object selectedFace = (object)selectionMgr.GetSelectedObject6(1, -1);
object[] fixedFaces = { selectedFace };
CWRestraint restraint = (CWRestraint)LBCMgr.AddRestraint((int)swsRestraintType_e.swsRestraintTypeFixed, fixedFaces, null, out errCode);
}
swModel.ClearSelection2(true);
//add force
selectionMgr = (SelectionMgr)swModel.SelectionManager;
isSelected = swModel.Extension.SelectByID2("", "FACE", x_o + l1 + l3 + (width / 2.0), 0, thickness / 2.0, false, 0, null, 0);
if (isSelected)
{
object selectedFace = (object)selectionMgr.GetSelectedObject6(1, -1);
object[] forceAdd = { selectedFace };
selectionMgr = (SelectionMgr)swModel.SelectionManager;
swModel.Extension.SelectByID2("", "FACE", x_o + l1 + l3 + width, -(l4 + width) / 2.0, thickness / 2.0, false, 0, null, 0);
object selectedFaceToForceDir = (object)selectionMgr.GetSelectedObject6(1, -1);
double[] distValue = null;
double[] forceValue = null;
double[] Force = { F2, F3, F1 };
cwForce = (CWForce)LBCMgr.AddForce3((int)swsForceType_e.swsForceTypeForceOrMoment, (int)swsSelectionType_e.swsSelectionFaceEdgeVertexPoint,
2, 0, 0, 0,
(distValue),
(forceValue),
false, true,
(int)swsBeamNonUniformLoadDef_e.swsTotalLoad,
0, 7, 0.0,
Force,
false, false,
(forceAdd),
(selectedFaceToForceDir),
false, out errCode); //i have tried to figure out these arguments for one day, keep them and dont't change them.
//the way to check cwForce : cwForce.GetForceComponentValues()
//ForceComponet: [int b1, // 1 if x-direction hat Force-komponent, else 0
// int b2, // 1 if y-direction hat Force-komponent, else 0
// int b3, // 1 if z-direction hat Force-komponent, else 0
// double d1, // Force-komponent in x
// double d2, // Force-komponent in y
// double d3 // Force-komponent in z
// ]
//PS: the definition of xyz seems like not the same as the global XYZ system in SW.
swModel.ClearSelection2(true);
//meshing
CWMesh CWMeshObj = default(CWMesh);
CWMeshObj = Study.Mesh;
CWMeshObj.MesherType = (int)swsMesherType_e.swsMesherTypeStandard;
CWMeshObj.Quality = (int)swsMeshQuality_e.swsMeshQualityDraft;
errCode = Study.CreateMesh(0, MeshEleSize, MeshTol);
CWMeshObj = null;
//run analysis
errCode = Study.RunAnalysis();
if (errCode != 0)
{
Console.WriteLine(string.Format("RunAnalysis errCode = {0}", errCode));
Console.WriteLine(string.Format("RunAnalysis failed"));
errors = swApp.UnloadAddIn(path_to_cosworks_dll);
swApp.CloseAllDocuments(true);
Console.WriteLine(string.Format("please start a new one"));
return;
}
Console.WriteLine("RunAnalysis successed, ready to get results");
//get results
CWFeatobj = Study.Results;
//get max von Mieses stress
Stress = (object[])CWFeatobj.GetMinMaxStress((int)swsStressComponent_e.swsStressComponentVON,
0, 0, null,
(int)swsStrengthUnit_e.swsStrengthUnitNewtonPerSquareMillimeter,
out errCode);
maxStress = (float)Stress[3]; //Stress: {node_with_minimum_stress, minimum_stress, node_with_maximum_stress, maximum_stress}
Console.WriteLine(maxStress);
if (maxStress >= 351.6)
{
Console.WriteLine("out of yield stress, start a new example");
errors = swApp.UnloadAddIn(path_to_cosworks_dll);
swApp.CloseAllDocuments(true);
textBox_FEM_result.Text = "out of yield stress";
return;
}
//get max URES displacement
Disp = (object[])CWFeatobj.GetMinMaxDisplacement((int)swsDisplacementComponent_e.swsDisplacementComponentURES,
0, null,
(int)swsLinearUnit_e.swsLinearUnitMillimeters,
out errCode);
maxDisp = (float)Disp[3]; //Disp: {node_with_minimum_displacement, minimum_displacement, node_with_maximum_displacement, maximum_displacement}
CWFeatobj = null;
Console.WriteLine(string.Format("max Displacement: {0:f4} mm", maxDisp));
textBox_FEM_result.Text = maxDisp.ToString();
}
else
{
Console.WriteLine("not selected");
}
#endregion
errors = swApp.UnloadAddIn(path_to_cosworks_dll);
swApp.CloseAllDocuments(true);
}
