protected override void Command()
{
try
{
LireInfos();
AjouterInfos(MdlBase);
if (MdlBase.TypeDoc() == eTypeDoc.Assemblage)
{
MdlBase.eRecParcourirComposants(c => { if (c.IsHidden(true))
{
return(false);
}
AjouterInfos(c.eModelDoc2()); return(false); });
}
if (ToutReconstruire)
{
MdlBase.ForceRebuild3(false);
}
}
catch (Exception e)
{
this.LogErreur(new Object[] { e });
}
}
public void Build(UpdateState us)
{
us(16, "Запускаем Solidworks");
SldWorks swApp = new SldWorks();
int error = 0;
int warning = 0;
us(32, "Построение 3Д модели");
ModelDoc2 part = swApp.OpenDoc6(pathToBeam, (int)swDocumentTypes_e.swDocPART, 0, "", ref error, ref warning);
IModelView myModelView = part.ActiveView;
myModelView.FrameState = (int)swWindowState_e.swWindowMaximized;
us(48, "Устанавливаем размеры");
part.Parameter("length@BeamSketch").SystemValue = length / 1000.0;
part.Parameter("depth@BeamSketch").SystemValue = depth / 1000.0;
part.Parameter("externalDiameter@BeamSketch").SystemValue
= externalDiameter / 1000.0;
us(64, "Перестраиваем");
part.EditRebuild3();
part.ForceRebuild3(false);
us(80, "Отображаем");
swApp.FrameState = (int)swWindowState_e.swWindowMaximized;
us(100, "Готов");
}
public void UseDefaultRadiusBend(ModelDoc2 swmodel)
{
var swPart = (PartDoc)swmodel;
Feature swFeat = swPart.FirstFeature();
while (swFeat != null)
{
string nameTypeFeature = swFeat.GetTypeName2();
if (nameTypeFeature == "EdgeFlange")
{
EdgeFlangeFeatureData swEdgeFlange = swFeat.GetDefinition();
if (swEdgeFlange.UseDefaultBendRadius == false)
{
swApp.SendMsgToUser2(string.Format("Для \" {0} \" будет установлен параметр \"Использовать радиус по умолчанию\".", swFeat.Name), (int)swMessageBoxIcon_e.swMbInformation, (int)swMessageBoxBtn_e.swMbOk);
swEdgeFlange.UseDefaultBendRadius = true;
swFeat.ModifyDefinition(swEdgeFlange, swmodel, null);
}
}
swFeat = swFeat.GetNextFeature();
}
swmodel.ForceRebuild3(true);
}
public void Rebuild()
{
//PbLoadAddTable.Minimum = 0;
//var confArray = ClassPropertySldWorks.ListColumn(_swModel);
//PbLoadAddTable.Maximum = confArray.Count;
//PbLoadAddTable.Value = 0;
//double value = 0;
// to the ProgressBar's SetValue method.
//UpdateProgressBarDelegate updatePbDelegate = PbLoadAddTable.SetValue;
string[] arrayConfig = _swModel.GetConfigurationNames();
foreach (var confName in from confName in arrayConfig
let swConf = _swModel.GetConfigurationByName(confName)
where ((Configuration)swConf).IsDerived() == false select confName)
{
_swModel.ShowConfiguration2(confName);
//value += 1;
_swModel.ForceRebuild3(false);
//Dispatcher.Invoke(updatePbDelegate, System.Windows.Threading.DispatcherPriority.Background, new object[] { ProgressBar.ValueProperty, value });
}
//PbLoadAddTable.Value = 0;
}
private void OnClickVue(object sender, EventArgs e)
{
if (CurrentClickVue)
{
return;
}
try
{
if (DessinActif.IsNull() || (MdlActif.eSelect_Nb() == 0))
{
return;
}
var typeSel = MdlActif.eSelect_RecupererSwTypeObjet();
if (typeSel == swSelectType_e.swSelDRAWINGVIEWS)
{
CurrentClickVue = true;
var vue = MdlActif.eSelect_RecupererObjet <SolidWorks.Interop.sldworks.View>();
if (BtParent.Checked)
{
vue.UseParentScale = true;
}
else if (BtFeuille.Checked)
{
vue.UseSheetScale = 1;
}
else if (BtPersonnalise.Checked)
{
var echelle = TextBoxVue.Text.Split(':');
if (echelle.Length == 2)
{
var e1 = echelle[0].eToDouble();
var e2 = echelle[1].eToDouble();
if (e1 > 0 && e2 > 0)
{
vue.ScaleRatio = new Double[] { e1, e2 };
//vue.ScaleDecimal = e1 / e2;
MdlActif.ForceRebuild3(true);
MdlActif.EditRebuild3();
MdlActif.GraphicsRedraw2();
}
}
}
vue.eSelectionner(DessinActif);
CurrentClickVue = false;
}
}
catch
{
ReinitialiserVue();
}
}
/// <summary>
/// Удаляет свойства, если они не в своей категории
/// </summary>
public static void FixPropertys()
{
string ValOut;
string ResValOut;
bool WasResolved;
cust = swModel.Extension.CustomPropertyManager[""];
cust2 = swModel.Extension.CustomPropertyManager[EditProp.configuracione];
cust.Delete2("Обозначение");
cust.Delete2("Наименование");
cust.Delete2("Наименование_ФБ");
cust.Delete2("Number");
cust.Delete2("RenameSWP");
cust.Delete2("DescriptionEng");
cust.Delete2("Сборка");
cust.Delete2("Примечание");
cust.Delete2("Формат");
cust.Delete2("DrawnBy");
cust2.Get5("Проверил", true, out ValOut, out ResValOut, out WasResolved);
Propertiy.ChechedBy = ResValOut;
cust2.Delete2("Проверил");
cust.Add3("Проверил", 30, Propertiy.ChechedBy, (int)swCustomPropertyAddOption_e.swCustomPropertyOnlyIfNew);
cust2.Get5("Утвердил", true, out ValOut, out ResValOut, out WasResolved);
Propertiy.ApprovedBy = ResValOut;
cust2.Delete2("Утвердил");
cust.Add3("Утвердил", 30, ResValOut, (int)swCustomPropertyAddOption_e.swCustomPropertyOnlyIfNew);
cust2.Get5("Техконтроль", true, out ValOut, out ResValOut, out WasResolved);
Propertiy.TControl = ResValOut;
cust2.Delete2("Техконтроль");
cust.Add3("Техконтроль", 30, ResValOut, (int)swCustomPropertyAddOption_e.swCustomPropertyOnlyIfNew);
cust2.Get5("Масса_Таблица", true, out ValOut, out ResValOut, out WasResolved);
Propertiy.Weight = ResValOut;
cust2.Delete2("Масса_Таблица");
cust2.Add3("Масса", 30, ResValOut, (int)swCustomPropertyAddOption_e.swCustomPropertyOnlyIfNew);
cust2.Delete2("CheckedBy");
cust2.Delete2("EngineeringApproval");
swModel.ForceRebuild3(false);
}
private void btnCreate_Click(object sender, EventArgs e)
{
if (cbCustomer.Text == string.Empty)
{
DrawingPropertySet.SwApp.SendMsgToUser2(Properties.Resources.CustomerEmpty,
(int)swMessageBoxIcon_e.swMbStop,
(int)swMessageBoxBtn_e.swMbOk);
}
else if (cbItemNo.Text == string.Empty)
{
DrawingPropertySet.SwApp.SendMsgToUser2(Properties.Resources.ItemNumberEmpty,
(int)swMessageBoxIcon_e.swMbStop,
(int)swMessageBoxBtn_e.swMbOk);
}
else if (cbDescription.Text.Length > 50)
{
DrawingPropertySet.SwApp.SendMsgToUser2(Properties.Resources.CutlistDescriptionTooLong,
(int)swMessageBoxIcon_e.swMbStop,
(int)swMessageBoxBtn_e.swMbOk);
}
else
{
string[] clData = cbItemNo.Text.Split(new string[] { "REV" }, StringSplitOptions.None);
if (clData.Length > 1)
{
if (CutlistData.GetCutlistID(clData[0].Trim(), clData[1].Trim()) > 0)
{
UpdateCutlist(clData[0].Trim(), clData[1].Trim());
}
}
else
{
UpdateCutlist(cbItemNo.Text, cbRev.Text);
}
if (mde != null)
{
mde.SetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalDisplay,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified, fracdisp);
mde.SetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalPlaces,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified, decs);
mde.SetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalDisplay,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified, decd);
md.ForceRebuild3(false);
}
if (Properties.Settings.Default.MakeSounds)
{
System.Media.SystemSounds.Beep.Play();
}
Close();
}
}
// Строит или изменяет модель
public void Build()
{
InitAndRunSwApp();
// имена размеров в документе полумуфты
string fingerParameter1 = "fingers@Круговой массив1";
string fingerParameter2 = "fingers@Круговой массив2";
string nomianalDiameterParameter = "nominalDiameter@Эскиз1";
// имя полумуфты в сборке (имя компонента верхнего уровня)
string assemblyPolumuftaName = "Полумуфта-1";
// Менеджер выделения, выбора
SelectionMgr swSelMgr = (SelectionMgr)swModel.SelectionManager;
// удалить выделение
swModel.ClearSelection2(true);
Component2 swComp = assembly.GetComponentByName(assemblyPolumuftaName);
// выбрать полумуфту, не добавлять к выбранным, дата?, показать всплывающее кокшко
swComp.Select4(false, null, false);
int info = 0;
// начать изменение полумуфты
assembly.EditPart2(false, false, ref info);
// получить редактируемую модель
ModelDoc2 polumufta = (ModelDoc2)assembly.GetEditTarget();
// установка изменяемых параметров для всех конфигураций
polumufta.Parameter(fingerParameter1).SetSystemValue3(
countFingers,
(int)swSetValueInConfiguration_e.swSetValue_InAllConfigurations
);
polumufta.Parameter(fingerParameter2).SetSystemValue3(
countFingers,
(int)swSetValueInConfiguration_e.swSetValue_InAllConfigurations
);
polumufta.Parameter(nomianalDiameterParameter).SetSystemValue3(
nominalDiameter,
(int)swSetValueInConfiguration_e.swSetValue_InAllConfigurations
);
// ??
bool retVal = polumufta.EditSuppress2();
//Debug.Assert(retVal);
// ??
assembly.EditAssembly();
swModel.EditRebuild3();
swModel.ForceRebuild3(false);
swModel.ViewZoomtofit2();
}
private void InitTableData()
{
md = (ModelDoc2)DrawingPropertySet.SwApp.ActiveDoc;
mde = md.Extension;
fracdisp = mde.GetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalDisplay,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified);
//int den = mde.GetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearFractionDenominator,
// (int)swUserPreferenceOption_e.swDetailingNoOptionSpecified);
decs = mde.GetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalPlaces,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified);
decd = mde.GetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalDisplay,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified);
try {
mde.SetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalDisplay,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified, (int)swFractionDisplay_e.swDECIMAL);
mde.SetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalPlaces,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified, 3);
mde.SetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalDisplay,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified, 3);
md.ForceRebuild3(false);
table = new swTableType.swTableType((DrawingPropertySet.SwApp.ActiveDoc as ModelDoc2),
Redbrick.MasterHashes);
} catch (NullReferenceException nre) {
if (_swApp != null)
{
if (dept > -1)
{
Redbrick.InsertBOM(_swApp, dept);
}
else
{
Redbrick.InsertBOM(_swApp);
}
InitTableData();
}
else
{
throw new NullReferenceException(@"No table found.");
}
} catch (Exception e) {
RedbrickErr.ErrMsg em = new RedbrickErr.ErrMsg(e);
em.ShowDialog();
Close();
} finally {
//
}
}
public void Write(ModelDoc2 doc)
{
// OK, so the controls were linked on update. This reads whatever was
// entered into the controls, then writes to SW.
//mp.Update(ref props, cs.EdgeDiffL, cs.EdgeDiffW);
ReadControls();
props.Write();
//ch.Write();
// Show changes.
doc.ForceRebuild3(false);
// This isn't too slow. Might be too slow in DrawingRedbrick though.
//int err = 0;
//int wrn = 0;
//swSaveAsOptions_e op = swSaveAsOptions_e.swSaveAsOptions_Silent;
//doc.Save3((int)op, ref err, ref wrn);
}
// Проверка на дублирование конфигураций
public void SplitConfigurations(string configName)
{
swApp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
swModel = swApp.ActiveDoc;
CustomPropertyManager swCustProp;
var ValOut = "";
var number = "";
var razdel = "";
swCustProp = swModel.Extension.CustomPropertyManager[configName];
if (swModel.CustomInfo2["", "RenameSWP"] == "1")
{
return;
}
if (configName != "00")
{
swCustProp.Get4("Обозначение", true, out ValOut, out number);
swCustProp.Get4("Раздел", true, out ValOut, out razdel);
//var stringSldasm = swModel.GetTitle().Replace(".SLDASM", "");
//if (number != swModel.GetTitle() + "-" + configName)
if ((number != swModel.GetTitle().Replace(".SLDASM", "") + "-" + configName) || (number != swModel.GetTitle().Replace(".SLDPRT", "") + "-" + configName))
{
if (razdel == "Детали" | razdel == "Сборочные единицы")
{
MessageBox.Show("Для конфигурации " + "\"" + configName + "\"" + " не проставленно исполнение. Параметр будет проставлен автоматически.");
swModel.DeleteCustomInfo2(configName, "Обозначение");
swModel.DeleteCustomInfo2(configName, "Исполнение");
swModel.AddCustomInfo3(configName, "Исполнение", 30, "");
swModel.AddCustomInfo3(configName, "Обозначение", 30, "$PRP:\"SW-File Name\"-" + configName);
swModel.AddCustomInfo3(configName, "Обозначение", 30, "$PRP:\"SW-File Name\"");
swModel.CustomInfo2[configName, "Исполнение"] = "1";
swModel.ForceRebuild3(false);
}
}
}
}
public void CreatePart()
{
string guild = Guid.NewGuid().ToString();
string root = @"C:\Users\timos\source\Project\Solution\Project\VenturiPart\" + guild;
if (!Directory.Exists(root))
{
Directory.CreateDirectory(root);
}
else
{
throw new ArgumentException("Чертеж уже существует.");
}
swApp = GetSolidWorks.GetApplication();
defaultPartTemplate = swApp.GetUserPreferenceStringValue((int)swUserPreferenceStringValue_e.swDefaultTemplatePart);
swApp.NewDocument(defaultPartTemplate, 0, 0, 0);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.Extension.SelectByID2("Front Plane", "PLANE", 0, 0, 0, false, 0, null, 0);
swModel.SketchManager.InsertSketch(true);
swModel.ClearSelection2(true);
swModel.SketchManager.CreateCenterLine(0.000000, 0.000000, 0.000000, -0.173611, 0.000000, 0.000000);
swModel.SketchManager.CreateLine(0.000000, -0.026016, 0.000000, -0.039342, -0.026016, 0.000000);
swModel.SketchManager.CreateLine(-0.039342, -0.026016, 0.000000, -0.075130, -0.007488, 0.000000);
swModel.SketchManager.CreateLine(-0.075130, -0.007488, 0.000000, -0.092897, -0.007488, 0.000000);
swModel.SketchManager.CreateLine(-0.092897, -0.007488, 0.000000, -0.173611, -0.026016, 0.000000);
swModel.ClearSelection2(true);
swModel.Extension.SelectByID2("Point8", "SKETCHPOINT", -0.17361079172679997, -0.026016237064323086, 0, false, 0, null, 0);
swModel.Extension.SelectByID2("Point2", "SKETCHPOINT", -0.17361079172679997, 0, 0, true, 0, null, 0);
swModel.SketchAddConstraints("sgVERTICALPOINTS2D");
swModel.Extension.SelectByID2("Point4", "SKETCHPOINT", 0, -0.026016237064323086, 0, false, 0, null, 0);
swModel.Extension.SelectByID2("Point1", "SKETCHPOINT", 0, 0, 0, true, 0, null, 0);
swModel.SketchAddConstraints("sgVERTICALPOINTS2D");
swModel.Extension.SelectByID2("Point4", "SKETCHPOINT", 0, -0.026016237064323086, 0, false, 0, null, 0);
swModel.Extension.SelectByID2("Point1", "SKETCHPOINT", 0, 0, 0, true, 0, null, 0);
swModel.ClearSelection2(true);
swModel.FeatureManager.FeatureRevolve2(true, true, true, false, false, false, 0, 0, 6.2831853071796004, 0, false, false, 0.01, 0.01, 0, 0.005, 0.01, true, true, true);
swModel.ISelectionManager.EnableContourSelection = false;
swModel.ViewZoomtofit2();
swModel.ForceRebuild3(true);
swModel.SaveAs(PartName + ".SPLDRT");
swApp = null;
}
public static void UpdateProperty(MaterialModel objMaterial)
{
//1.打开指定的SW文件
ModelDoc2 swDoc = swAppHelper.ActiveDoc(Globals.FileName);
//2.获取当前激活配置名
string configName = swDoc.ConfigurationManager.ActiveConfiguration.Name;
#region 封装所有的SolidWorks属性（配置+自定义）
//获取属性值：图号、名称、型号规格、单位、热处理、表面处理、品牌、血液
Dictionary <string, string> MyCustominfos = new Dictionary <string, string>();
MyCustominfos.Add("Identification Nb", objMaterial.MaterialCode);
MyCustominfos.Add("Description", objMaterial.MaterialName);
MyCustominfos.Add("规格", objMaterial.MaterialSpec);
MyCustominfos.Add("型号", objMaterial.MaterialType);
MyCustominfos.Add("单位", objMaterial.Unit);
MyCustominfos.Add("加工属性", objMaterial.MachiningPropertyId);
MyCustominfos.Add("涂装颜色", objMaterial.PaintingColor);
MyCustominfos.Add("品牌", objMaterial.BrandId);
//遍历每个属性并赋值
foreach (string key in MyCustominfos.Keys)
{
//删除，添加配置特定的属性
swDoc.DeleteCustomInfo2(configName, key);
swDoc.AddCustomInfo3(configName, key, (int)swCustomInfoType_e.swCustomInfoText, MyCustominfos[key]);
//删除，添加自定义的属性
swDoc.DeleteCustomInfo(key);
swDoc.AddCustomInfo2(key, (int)swCustomInfoType_e.swCustomInfoText, MyCustominfos[key]);
}
#endregion
#region 重建模型
swDoc.ClearSelection(); //清除选择
swDoc.ForceRebuild3(true); //重建模型Ctrl+Q
//swDoc.ShowNamedView2("*等轴测", 7);//等轴测显示
//swDoc.ViewZoomtofit2();//全屏显示
//swDoc.Save();
//swAppHelper.CloseDoc(objDoc.OriginalFileName);
#endregion
}
public static void SetProperties(string confName)
{
if (docType != swDocumentTypes_e.swDocDRAWING && confName != "")// свойства для Configuration
{
swModel.Extension.CustomPropertyManager[confName].Add3("Обозначение", 30, Propertiy.Designition, 2);
swModel.Extension.CustomPropertyManager[confName].Add3("Раздел", 30, Propertiy.Division, 2);
swModel.Extension.CustomPropertyManager[confName].Add3("Масса", 30, Propertiy.Weight, 2);
swModel.Extension.CustomPropertyManager[confName].Add3("Наименование", 30, Propertiy.Name, 2);
}
if (docType != swDocumentTypes_e.swDocDRAWING)
{
swModel.Extension.CustomPropertyManager[""].Add3("Код документа", 30, Propertiy.DocCode, 2);
swModel.Extension.CustomPropertyManager[""].Add3("Разработал", 30, Propertiy.DevelopedBy, 2);
swModel.Extension.CustomPropertyManager[""].Add3("Проверил", 30, Propertiy.ChechedBy, 2);
swModel.Extension.CustomPropertyManager[""].Add3("Техконтроль", 30, Propertiy.TControl, 2);
swModel.Extension.CustomPropertyManager[""].Add3("Н.контр.", 30, Propertiy.NControl, 2);
swModel.Extension.CustomPropertyManager[""].Add3("Утвердил", 30, Propertiy.ApprovedBy, 2);
swModel.Extension.CustomPropertyManager[""].Add3("Контора", 30, Propertiy.Subvision, 2);
swModel.Extension.CustomPropertyManager[""].Add3("N извещения", 30, Propertiy.Notification, 2);
swModel.Extension.CustomPropertyManager[""].Add3("Изменение", 30, Propertiy.Changing, 2);
swModel.Extension.CustomPropertyManager[""].Add3("Тип документа", 30, Propertiy.DocType, 2);
swModel.Extension.CustomPropertyManager[""].Add3("MassaFormat", 30, Propertiy.MassaFormat, 2);
}
else if (docType == swDocumentTypes_e.swDocDRAWING)
{
swModel.Extension.CustomPropertyManager[""].Add3("Литера", 30, Propertiy.Letter, 2);
swModel.Extension.CustomPropertyManager[""].Add3("Масштаб", 30, Propertiy.Scale, 2);
swModel.Extension.CustomPropertyManager[""].Add3("Материал", 30, Propertiy.Material, 2);
swModel.Extension.CustomPropertyManager[""].Add3("Тип документа1", 30, Propertiy.DocType1, 2);
swModel.Extension.CustomPropertyManager[""].Add3("Литера2", 30, Propertiy.Letter2, 2);
swModel.Extension.CustomPropertyManager[""].Add3("Литера3", 30, Propertiy.Letter3, 2);
swModel.Extension.CustomPropertyManager[""].Add3("Раздел", 30, Propertiy.Division, 2);
swModel.Extension.CustomPropertyManager[""].Add3("Лист", 30, Propertiy.Sheet, 2);
swModel.Extension.CustomPropertyManager[""].Add3("Листов", 30, Propertiy.Sheets, 2);
swModel.Extension.CustomPropertyManager[""].Add3("Формат", 30, Propertiy.Format, 2);
}
swModel.ForceRebuild3(false);
}
public void updateExtrusionDepth(double depthInInches)
{
if (depthInInches < 0)
{
return;
}
double depthInMeters = Utilities.inchesToMeters(depthInInches);
IDisplayDimension dispDim = (IDisplayDimension)extrusion.GetFirstDisplayDimension();
IDimension dim = dispDim.IGetDimension();
dim.SetSystemValue3(depthInMeters,
(int)swSetValueInConfiguration_e.swSetValue_InSpecificConfigurations,
new string[] { belongsTo.ReferencedConfiguration });
swFeatureMgr.EditRollback((int)swMoveRollbackBarTo_e.swMoveRollbackBarToEnd, extrusion.Name);
swAssembly.EditRebuild();
swDoc.EditRebuild3();
swDoc.ForceRebuild3(false);
swAssembly.EditAssembly();
}
public void setObject(string[] values)
{
ModelDoc2 swModelDoc = swApp.ActiveDoc;
EquationMgr swEqnMgr = swModelDoc.GetEquationMgr();
for (int i = 0; i < swEqnMgr.GetCount(); i++)
{
if (swEqnMgr.GlobalVariable[i])
{
string newEquation;
// Get the variable name from the swEqn
string[] temp = swEqnMgr.Equation[i].Split(new string[] { "=" }, StringSplitOptions.None);
string name = temp[0];
// Get the variable unit from the swEqn
Regex re = new Regex(@"([._0-9]+)([a-zA-Z]+)");
Match result = re.Match(temp[1]);
string unit = result.Groups[2].Value;
// Get the index of swEqn variable at variables.
temp = temp[0].Split('"');
int index = variables.indexVariable(temp[1]);
if (index >= 0)
{
newEquation = name + "= " + values[index] + unit;
swEqnMgr.Equation[i] = newEquation;
}
}
}
swModelDoc.ForceRebuild3(true);
}
public void CmdRevMethod(bool m)
{
try
{
if (m & string.IsNullOrEmpty(TxtBox.Text))
{
MessageBox.Show("Введите номер извещения.");
return;
}
for (var i = 0; i <= _vSheetNames.GetUpperBound(0); i++)
{
//TODO: _swNote
//ok = _swDraw.ActivateSheet(_vSheetNames[i]);
_swDraw.ActivateSheet(_vSheetNames[i]);
_swSheet = _swDraw.GetCurrentSheet();
_strSheetFormatName = _swSheet.GetSheetFormatName();
_swModel = (ModelDoc2)_swDraw;
_swSelMgr = _swModel.SelectionManager;
//MessageBox.Show(_swSelMgr.ToString());
// Дата
StrTempData = "Revision4@" + _strSheetFormatName;
ok = _swModel.Extension.SelectByID2(StrTempData, "NOTE", 0, 0, 0, false, 0, null, 0);
if (ok)
{
_swNote = _swSelMgr.GetSelectedObject2(1);
//MessageBox.Show(_swNote.ToString());
if (m)
{
var date = (DateTime)StrData.SelectedDate;
StrTempData = Convert.ToString(date.ToString("dd-MM-yy"));
_swNote.SetText(StrTempData);
}
else
{
//MessageBox.Show(StrTempData);
StrTempData = _swNote.GetText();
if (StrTempData == "" | StrTempData == " ")
{
StrData.SelectedDate = (DateTime.Today);
}
else
{
StrData.SelectedDate = Convert.ToDateTime(StrTempData);
}
}
}
// Номер
StrTempNumber = "Revision3@" + _strSheetFormatName;
_swModel.Extension.SelectByID2(StrTempNumber, "NOTE", 0, 0, 0, false, 0, null, 0);
if (ok)
{
_swNote = _swSelMgr.GetSelectedObject2(1);
if (m)
{
StrTempNumber = "ИКД-" + TxtBox.Text;
_swNote.SetText(StrTempNumber);
}
else
{
StrTempNumber = _swNote.GetText();
if (StrTempNumber != " ")
{
TxtBox.Text = StrTempNumber.Substring(4);
}
}
}
// Зам.
_strTemp = "Revision2@" + _strSheetFormatName;
_swModel.Extension.SelectByID2(_strTemp, "NOTE", 0, 0, 0, false, 0, null, 0);
if (ok)
{
_swNote = _swSelMgr.GetSelectedObject2(1);
if (m)
{
if (Rb1.IsChecked == true)
{
_swNote.SetText("Зам.");
_swModel.DeleteCustomInfo2("", "Revision");
}
if (Rb3.IsChecked == true)
{
_swNote.SetText("Нов.");
_swModel.DeleteCustomInfo2("", "Revision");
}
if (Rb2.IsChecked == true)
{
_swNote.SetText("Змін.");
_swModel.DeleteCustomInfo2("", "Revision");
_swModel.AddCustomInfo3("", "Revision", 30, "");
_swModel.CustomInfo2["", "Revision"] = Convert.ToString(SpinButton.Content);
}
}
else
{
_strTemp = _swNote.GetText();
if (_strTemp == "Зам.")
{
Rb1.IsChecked = true;
Rb3.IsChecked = false;
Rb2.IsChecked = false;
SpinButton.IsEnabled = false;
}
if (_strTemp == "Нов.")
{
Rb1.IsChecked = false;
Rb3.IsChecked = true;
Rb2.IsChecked = false;
SpinButton.IsEnabled = false;
}
if (_strTemp == "Змін.")
{
Rb1.IsChecked = false;
Rb3.IsChecked = false;
Rb2.IsChecked = true;
SpinButton.IsEnabled = true;
}
int n;
bool isNumeric = int.TryParse(_swModel.CustomInfo2["", "Revision"], out n);
if (isNumeric)
{
SpinButton.Content = _swModel.CustomInfo2["", "Revision"];
}
else
{
_swModel.DeleteCustomInfo2("", "Revision");
}
}
}
}
// Возвращение активного листа
_swDraw.ActivateSheet(_strActiveSheetName);
// Перестраиваем чертеж
_swModel.ForceRebuild3(false);
_swModel.GraphicsRedraw2();
_swModel.ClearSelection2(true);
}
catch (Exception ex)
{
MessageBox.Show(ex.Message + "; " + ex.StackTrace);
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
DP330 item = (DP330)objDP330Service.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
ModelDocExtension swModelDocExt = default(ModelDocExtension);
bool status = false;
string compReName = string.Empty;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称
swModelDocExt = (ModelDocExtension)swModel.Extension;
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true);
//TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
decimal leftSBDis = item.LeftDis;
decimal rightSBDis = item.RightDis;
try
{
//----------Top Level----------
if (item.Length < 1000m)
{
swModel.Parameter("D1@LocalLPattern2").SystemValue = 2;
swModel.Parameter("D3@LocalLPattern2").SystemValue = (item.Length - 400m) / 1000m;
}
else if (item.Length >= 1000m && item.Length < 2000m)
{
swModel.Parameter("D1@LocalLPattern2").SystemValue = 3;
swModel.Parameter("D3@LocalLPattern2").SystemValue = (item.Length - 400m) / 2000m;
}
else
{
swModel.Parameter("D1@LocalLPattern2").SystemValue = 4;
swModel.Parameter("D3@LocalLPattern2").SystemValue = (item.Length - 400m) / 3000m;
}
//----------侧板----------
switch (item.SidePanel)
{
case "LEFT":
case "DPBACKL":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0003-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0005-10"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0004-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0005-11"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
break;
case "RIGHT":
case "DPBACKR":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0003-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0005-10"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0004-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0005-11"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
case "MIDDLE":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0003-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0005-10"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0004-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0005-11"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
break;
default:
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0003-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0005-10"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0004-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0005-11"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
}
//----------背板----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0002-2"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D3@Skizze1").SystemValue = item.Length / 1000m;
swFeat = swComp.FeatureByName("DPB-LEFT");
if (item.SidePanel == "DPBACKL" || item.SidePanel == "DPBACKB")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("DPB-RIGHT");
if (item.SidePanel == "DPBACKR" || item.SidePanel == "DPBACKB")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//----------NOCJ腔主体----------
//重命名装配体内部
compReName = "FNCS0001[DP330-" + tree.Module + "]{" + (int)item.Length + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCS0001-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Skizze1").SystemValue = item.Length / 1000m;
if (item.Outlet == "LEFT")
{
swFeat = swComp.FeatureByName("OUTLET-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("OUTLET-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.Outlet == "RIGHT")
{
swFeat = swComp.FeatureByName("OUTLET-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("OUTLET-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("OUTLET-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("OUTLET-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("DPB-LEFT");
if (item.SidePanel == "DPBACKL" || item.SidePanel == "DPBACKB")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("DPB-RIGHT");
if (item.SidePanel == "DPBACKR" || item.SidePanel == "DPBACKB")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//DP
if (item.DPSide == "LEFT" || item.DPSide == "BOTH")
{
swFeat = swComp.FeatureByName("DP-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D14@Sketch42").SystemValue = (item.LeftDis + 1m) / 1000m;
leftSBDis = leftSBDis + 90m;
swFeat = swComp.FeatureByName("CUT-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch56").SystemValue = 105m / 1000m;
}
else
{
swFeat = swComp.FeatureByName("DP-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("CUT-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
if (item.DPSide == "RIGHT" || item.DPSide == "BOTH")
{
swFeat = swComp.FeatureByName("DP-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D14@Sketch43").SystemValue = (item.RightDis + 1m) / 1000m;
rightSBDis = rightSBDis + 90m;
swFeat = swComp.FeatureByName("CUT-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch58").SystemValue = 105m / 1000m;
}
else
{
swFeat = swComp.FeatureByName("DP-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("CUT-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//BCJ
if (item.BackCJSide == "LEFT" || item.BackCJSide == "BOTH")
{
swFeat = swComp.FeatureByName("BCJ-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D8@Sketch19").SystemValue = (item.LeftDis + 11m) / 1000m;
leftSBDis = leftSBDis + 90m;
}
else
{
swFeat = swComp.FeatureByName("BCJ-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
if (item.BackCJSide == "RIGHT" || item.BackCJSide == "BOTH")
{
swFeat = swComp.FeatureByName("BCJ-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch20").SystemValue = (item.RightDis + 11m) / 1000m;
rightSBDis = rightSBDis + 90m;
}
else
{
swFeat = swComp.FeatureByName("BCJ-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//----------左----------
////左类型排风腔KCJDB800
//if (item.LeftBeamType == "KCJDB800" || item.LeftBeamType == "UCJDB800")
//{
// swFeat = swComp.FeatureByName("BCJ-LEFT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
// swFeat = swComp.FeatureByName("KCJDB800-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D59@Sketch46").SystemValue = (item.LeftBeamDis + 1m) / 1000m;
// if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D6@Sketch48").SystemValue = (item.Length - item.LeftBeamDis + 1m) / 1000m;
// }
//}
//else
//{
// swFeat = swComp.FeatureByName("KCJDB800-LEFT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//}
//左类型排风腔KCWDB800
if (item.LeftBeamType == "KCWDB800" || item.LeftBeamType == "UCWDB800")
{
swFeat = swComp.FeatureByName("BCJ-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DP-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("KCWDB800-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D30@Sketch50").SystemValue = (item.LeftBeamDis + 1m) / 1000m;
if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch53").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch53").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch53").SystemValue = (item.Length - item.LeftBeamDis + 1m) / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("KCWDB800-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
////左类型排风腔KCJSB535
//if (item.LeftBeamType == "KCJSB535" || item.LeftBeamType == "UCJSB535")
//{
// swFeat = swComp.FeatureByName("KCJSB535-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D46@Sketch35").SystemValue = (leftSBDis + 1m) / 1000m;
// if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 535m + 1m) / 1000m;
// }
//}
//else
//{
// swFeat = swComp.FeatureByName("KCJSB535-LEFT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//}
//左类型排风腔KCWSB535
if (item.LeftBeamType == "KCWSB535" || item.LeftBeamType == "UCWSB535")
{
swFeat = swComp.FeatureByName("KCWSB535-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D25@Sketch48").SystemValue = (leftSBDis + 1m) / 1000m;
if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch53").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch53").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch53").SystemValue = (leftSBDis + 535m + 1m) / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("KCWSB535-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
////左类型排风腔UCJSB385
//if (item.LeftBeamType == "UCJSB385")
//{
// swFeat = swComp.FeatureByName("UCJSB385-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D16@Sketch43").SystemValue = (leftSBDis + 1m) / 1000m;
// if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 385m + 1m) / 1000m;
// }
//}
//else
//{
// swFeat = swComp.FeatureByName("UCJSB385-LEFT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//}
////左类型排风腔KCJSB290
//if (item.LeftBeamType == "KCJSB290")
//{
// swFeat = swComp.FeatureByName("KCJSB290-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D14@Sketch41").SystemValue = (leftSBDis + 1m) / 1000m;
// if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 290m + 1m) / 1000m;
// }
//}
//else
//{
// swFeat = swComp.FeatureByName("KCJSB290-LEFT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//}
////左类型排风腔KCJSB265
//if (item.LeftBeamType == "KCJSB265")
//{
// swFeat = swComp.FeatureByName("KCJSB265-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D23@Sketch28").SystemValue = (leftSBDis + 1m) / 1000m;
// if (item.LKSide == "LEFT" || item.LKSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("LKS270-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D24@Sketch51").SystemValue = (leftSBDis + 265m + 1m) / 1000m;
// if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 270m + 265m + 1m) / 1000m;
// }
// }
// else
// {
// if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 265m + 1m) / 1000m;
// }
// }
//}
//else
//{
// swFeat = swComp.FeatureByName("KCJSB265-LEFT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//}
//左类型排风腔KCWSB265
if (item.LeftBeamType == "KCWSB265")
{
swFeat = swComp.FeatureByName("KCWSB265-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D15@Sketch46").SystemValue = (leftSBDis + 1m) / 1000m;
if (item.LKSide == "LEFT" || item.LKSide == "BOTH")
{
swFeat = swComp.FeatureByName("LKS270-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D24@Sketch52").SystemValue = (leftSBDis + 265m + 1m) / 1000m;
if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch53").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch53").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch53").SystemValue = (leftSBDis + 270m + 265m + 1m) / 1000m;
}
}
else
{
if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch53").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch53").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch53").SystemValue = (leftSBDis + 265m + 1m) / 1000m;
}
}
}
else
{
swFeat = swComp.FeatureByName("KCWSB265-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//----------右----------
////右类型排风腔KCJDB800
//if (item.RightBeamType == "KCJDB800" || item.RightBeamType == "UCJDB800")
//{
// swFeat = swComp.FeatureByName("BCJ-RIGHT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
// swFeat = swComp.FeatureByName("KCJDB800-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D59@Sketch47").SystemValue = (item.RightBeamDis + 1m) / 1000m;
// if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D7@Sketch50").SystemValue = (item.Length - item.RightBeamDis + 1m) / 1000m;
// }
//}
//else
//{
// swFeat = swComp.FeatureByName("KCJDB800-RIGHT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//}
//右类型排风腔KCWDB800
if (item.RightBeamType == "KCWDB800" || item.RightBeamType == "UCWDB800")
{
swFeat = swComp.FeatureByName("BCJ-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DP-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("KCWDB800-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D31@Sketch51").SystemValue = (item.RightBeamDis + 1m) / 1000m;
if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch55").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch55").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch55").SystemValue =
(item.Length - item.RightBeamDis + 1m) / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("KCWDB800-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
////右类型排风腔KCJSB535
//if (item.RightBeamType == "KCJSB535" || item.RightBeamType == "UCJSB535")
//{
// swFeat = swComp.FeatureByName("KCJSB535-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D46@Sketch37").SystemValue = (rightSBDis + 1m) / 1000m;
// if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 535m + 1m) / 1000m;
// }
//}
//else
//{
// swFeat = swComp.FeatureByName("KCJSB535-RIGHT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//}
//右类型排风腔KCWSB535
if (item.RightBeamType == "KCWSB535" || item.RightBeamType == "UCWSB535")
{
swFeat = swComp.FeatureByName("KCWSB535-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D24@Sketch49").SystemValue = (rightSBDis + 1m) / 1000m;
if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch55").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch55").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch55").SystemValue = (rightSBDis + 535m + 1m) / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("KCWSB535-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
////右类型排风腔UCJSB385
//if (item.RightBeamType == "UCJSB385")
//{
// swFeat = swComp.FeatureByName("UCJSB385-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D16@Sketch44").SystemValue = (rightSBDis + 1m) / 1000m;
// if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 385m + 1m) / 1000m;
// }
//}
//else
//{
// swFeat = swComp.FeatureByName("UCJSB385-RIGHT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//}
////右类型排风腔KCJSB290
//if (item.RightBeamType == "KCJSB290")
//{
// swFeat = swComp.FeatureByName("KCJSB290-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D14@Sketch42").SystemValue = (rightSBDis + 1m) / 1000m;
// if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 290m + 1m) / 1000m;
// }
//}
//else
//{
// swFeat = swComp.FeatureByName("KCJSB290-RIGHT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//}
////右类型排风腔KCJSB265
//if (item.RightBeamType == "KCJSB265")
//{
// swFeat = swComp.FeatureByName("KCJSB265-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D1@Sketch55").SystemValue = (rightSBDis + 1m) / 1000m;
// if (item.LKSide == "RIGHT" || item.LKSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("LKS270-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D24@Sketch53").SystemValue = (rightSBDis + 265m + 1m) / 1000m;
// if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 270m + 265m + 1m) / 1000m;
// }
// }
// else
// {
// if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 265m + 1m) / 1000m;
// }
// }
//}
//else
//{
// swFeat = swComp.FeatureByName("KCJSB265-RIGHT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//}
//右类型排风腔KCWSB265
if (item.RightBeamType == "KCWSB265")
{
swFeat = swComp.FeatureByName("KCWSB265-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D15@Sketch47").SystemValue = (rightSBDis + 1m) / 1000m;
if (item.LKSide == "RIGHT" || item.LKSide == "BOTH")
{
swFeat = swComp.FeatureByName("LKS270-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D24@Sketch54").SystemValue = (rightSBDis + 265m + 1m) / 1000m;
if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch55").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch55").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch55").SystemValue = (rightSBDis + 270m + 265m + 1m) / 1000m;
}
}
else
{
if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch55").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch55").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch55").SystemValue = (rightSBDis + 265m + 1m) / 1000m;
}
}
}
else
{
swFeat = swComp.FeatureByName("KCWSB265-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
/// <summary>
/// 天花子装配导出DXF图纸
/// </summary>
/// <param name="swApp"></param>
/// <param name="tree"></param>
/// <param name="dxfPath"></param>
/// <param name="userId"></param>
public void CeilingAssyToDxf(SldWorks swApp, SubAssy subAssy, string dxfPath, int userId)
{
swApp.CommandInProgress = true;
List <CeilingCutList> celingCutLists = new List <CeilingCutList>();
string assyPath = subAssy.SubAssyPath;
if (assyPath.Length == 0)
{
return;
}
try
{
//打开模型
ModelDoc2 swModel = swApp.OpenDoc6(assyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
if (swModel == null)
{
MessageBox.Show("模型不存在，请认真检查", "模型不存在");
return;
}
string modulePath = dxfPath + @"\" + subAssy.SubAssyName;
if (!Directory.Exists(modulePath))
{
Directory.CreateDirectory(modulePath);
}
swModel.ForceRebuild3(true);
AssemblyDoc swAssy = swModel as AssemblyDoc;
//获取所有零部件集合
var compList = swAssy.GetComponents(false);
//遍历集合中的所有零部件对象
foreach (var swComp in compList)
{
//判断零件是否被压缩，不显示，封套，零件名称不是以sldprt或SLDPRT结尾
if (swComp.Visible == 1 && !swComp.IsEnvelope() && !swComp.IsSuppressed() &&
(swComp.GetPathName().EndsWith(".sldprt") || swComp.GetPathName().EndsWith(".SLDPRT")))
{
Component2 swParentComp = swComp.GetParent();
//总装没有父装配体
if (swParentComp == null)
{
ConfigurationManager swConfigMgr = swModel.ConfigurationManager;
Configuration swConfig2 = swConfigMgr.ActiveConfiguration;
swParentComp = swConfig2.GetRootComponent3(true);
}
//判断父装配体是否可视，并且不封套
if (swParentComp.Visible == 1 && !swParentComp.IsEnvelope() && !swComp.IsSuppressed())
{
PartDoc swPart = swComp.GetModelDoc2();
//获取文档中的额Body对象集合
var bodyList = swPart.GetBodies2(0, false);
//遍历集合中的所有Body对象,判断是否为钣金
foreach (var swBody in bodyList)
{
//如果是钣金则将零件地址添加到列表中
if (swBody.IsSheetMetal())
{
if (sheetMetaDic.ContainsKey(swComp.GetPathName()))
{
sheetMetaDic[swComp.GetPathName()] += 1;
}
else
{
sheetMetaDic.Add(swComp.GetPathName(), 1);
}
}
}
}
}
}
//关闭装配体零件
swApp.CloseDoc(assyPath);
//遍历钣金零件
foreach (var sheetMeta in sheetMetaDic)
{
//打开模型
ModelDoc2 swPart = swApp.OpenDoc6(sheetMeta.Key, (int)swDocumentTypes_e.swDocPART,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
Feature swFeat = (Feature)swPart.FirstFeature();
CeilingCutList cutRecord = new CeilingCutList()
{
SubAssyId = subAssy.SubAssyId,
Quantity = sheetMeta.Value,
UserId = userId
};
while (swFeat != null)
{
var suppStatus = swFeat.IsSuppressed2((int)swInConfigurationOpts_e.swThisConfiguration, null);
if (suppStatus[0] == false && swFeat.GetTypeName() == "SolidBodyFolder")
{
BodyFolder swBodyFolder = (BodyFolder)swFeat.GetSpecificFeature2();
swBodyFolder.SetAutomaticCutList(true);
swBodyFolder.SetAutomaticUpdate(true);
Feature SubFeat = swFeat.GetFirstSubFeature();
if (SubFeat != null)
{
Feature ownerFeature = SubFeat.GetOwnerFeature();
BodyFolder swSubBodyFolder = ownerFeature.GetSpecificFeature2();
swSubBodyFolder.UpdateCutList();
string val = string.Empty;
string valout = string.Empty;
bool wasResolved = false;
bool linkToProp = false;
SubFeat.CustomPropertyManager.Get4("Bounding Box Length", false, out val, out valout);
cutRecord.Length = Convert.ToDecimal(valout);
SubFeat.CustomPropertyManager.Get4("Bounding Box Width", false, out val, out valout);
cutRecord.Width = Convert.ToDecimal(valout);
SubFeat.CustomPropertyManager.Get4("Sheet Metal Thickness", false, out val, out valout);
cutRecord.Thickness = Convert.ToDecimal(valout);
SubFeat.CustomPropertyManager.Get4("Material", false, out val, out valout);
cutRecord.Materials = valout;
swPart.GetActiveConfiguration().CustomPropertyManager.Get6("Description", false, out valout, out val, out wasResolved, out linkToProp);
cutRecord.PartDescription = valout;
cutRecord.PartNo = swPart.GetTitle().Substring(0, swPart.GetTitle().Length - 7);
celingCutLists.Add(cutRecord);//将信息添加到集合中
}
}
swFeat = swFeat.GetNextFeature();
}
PartToDxf(swApp, swPart, modulePath);
//关闭零件
swApp.CloseDoc(sheetMeta.Key);
}
}
catch (Exception ex)
{
throw new Exception(assyPath + "导图过程发生异常，详细：" + ex.Message);
}
finally
{
sheetMetaDic.Clear();
swApp.CloseDoc(assyPath); //关闭，很快
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
//基于事务ceilingCutLists提交SQLServer
if (celingCutLists.Count == 0)
{
return;
}
try
{
if (objCeilingCutListService.ImportCutList(celingCutLists))
{
celingCutLists.Clear();
}
}
catch (Exception ex)
{
throw new Exception("Cutlist导入数据库失败" + ex.Message);
}
}
public void OpenDoc(int idPdm, int revision, int taskType, string filePath, string fileName)
{
swApp = new SldWorks() {Visible = true};
Process[] processes = Process.GetProcessesByName("SLDWORKS");
var errors = 0;
var warnings = 0;
#region Case
switch (taskType)
{
case 1:
Program.HostForm.richTextBoxLog.Invoke(new Action(() => Program.HostForm.richTextBoxLog.SelectionColor = Color.Black));
Program.HostForm.richTextBoxLog.Invoke(new Action(() => Program.HostForm.richTextBoxLog.SelectedText += (String.Format("Выполняется: {0}\r\n", filePath))));
swModel = swApp.OpenDoc6(filePath, (int) swDocumentTypes_e.swDocPART, (int) swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings);
swModel = swApp.ActiveDoc;
if (!IsSheetMetalPart((IPartDoc) swModel))
{
Program.HostForm.richTextBoxLog.Invoke(new Action(() => Program.HostForm.richTextBoxLog.SelectionColor = Color.DarkBlue));
Program.HostForm.richTextBoxLog.Invoke(new Action(() => Program.HostForm.richTextBoxLog.SelectedText += ("Не листовой металл!\r\n")));
Program.HostForm.richTextBoxLog.Invoke(new Action(() => Program.HostForm.richTextBoxLog.SelectedText += ("--------------------------------------------------------------------------------------------------------------\r\n")));
Program.HostForm.richTextBoxLog.Invoke(new Action(() => Program.HostForm.richTextBoxLog.SelectedText += ("\r\n")));
swApp.CloseDoc(filePath);
swApp.ExitApp();
swApp = null;
foreach (Process process in processes)
{
process.CloseMainWindow();
process.Kill();
}
return;
}
swExtension = (ModelDocExtension) swModel.Extension;
swModel.EditRebuild3();
swModel.ForceRebuild3(false);
CreateFlattPatternUpdate();
object[] confArray = swModel.GetConfigurationNames();
foreach (var confName in confArray)
{
Configuration swConf = swModel.GetConfigurationByName(confName.ToString());
if (swConf.IsDerived()) continue;
Area(confName.ToString());
GabaritsForPaintingCamera(confName.ToString());
}
ExportDataToXmlSql(fileName, idPdm, revision);
ConvertToErpt(filePath);
Program.HostForm.richTextBoxLog.Invoke(new Action(() => Program.HostForm.richTextBoxLog.SelectionColor = Color.Black));
Program.HostForm.richTextBoxLog.Invoke(new Action(() => Program.HostForm.richTextBoxLog.SelectedText += (String.Format("{0} - Выполнен!\r\n", filePath))));
Program.HostForm.richTextBoxLog.Invoke(new Action(() => Program.HostForm.richTextBoxLog.SelectedText += ("-----------------------------------------------------------------\r\n")));
Program.HostForm.richTextBoxLog.Invoke(new Action(() => Program.HostForm.richTextBoxLog.SelectedText += ("\r\n")));
break;
case 2:
swModel = swApp.OpenDoc6(filePath, (int) swDocumentTypes_e.swDocDRAWING, (int) swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings);
//if (warnings == (int)swFileLoadWarning_e.swFileLoadWarning_ReadOnly)
//{MessageBox.Show("This file is read-only.");}
swDraw = (DrawingDoc) swModel;
swExtension = (ModelDocExtension) swModel.Extension;
ConvertToPdf(filePath);
break;
case 3:
//swModel = swApp.OpenDoc6(filePath, (int)swDocumentTypes_e.swDocPART, (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings);
MessageBox.Show("3");
break;
}
//TODO: swApp exit
swApp.CloseDoc(filePath);
swApp.ExitApp();
swApp = null;
foreach (Process process in processes)
{
process.CloseMainWindow();
process.Kill();
}
#endregion
}
public string Build(SpigotType_e type, int width, int height)
{
string modelName = GetModelName(type);
NewSpigotName = GetSpigotName(type, width, height);
Dimension dimension;
int addDimH = modelName == "12-30" ? 10 : 1;
string newSpigotPath = $@"{RootFolder}{SubjectDestinationFolder}\{NewSpigotName}";
string drawingName = modelName == "12-30" ? modelName : "12-00";
var modelSpigotDrw = $@"{RootFolder}{SourceFolder}\{drawingName}.SLDDRW";
ModelDoc2 swDrawingSpigot = SolidWorksAdapter.OpenDocument(modelSpigotDrw, swDocumentTypes_e.swDocDRAWING);
solidWorksDocument = SolidWorksAdapter.AcativeteDoc("12-00");
AssemblyDoc assemblyDocument = (AssemblyDoc)solidWorksDocument;
assemblyDocument.ResolveAllLightWeightComponents(false);
DeleteEquations(modelName);
solidWorksDocument.ForceRebuild3(true);
#region formuls
var w = (Convert.ToDouble(width) - 1) / 1000; // ????????????
var h = Convert.ToDouble((Convert.ToDouble(height) + addDimH) / 1000); // ????????????
const double step = 50;
var weldWidth = Convert.ToDouble((Math.Truncate(Convert.ToDouble(width) / step) + 1)); // ????????????
var weldHeight = Convert.ToDouble((Math.Truncate(Convert.ToDouble(height) / step) + 1)); // ????????????
#endregion
DeleteComponents((int)type);
if (modelName == "12-20")
{
PartName = $"12-20-{height}.SLDPRT";
if (CheckExistPart != null)
{
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
else
{
MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
}
if (IsPartExist)
{
solidWorksDocument.Extension.SelectByID2("12-20-001-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
assemblyDocument.ReplaceComponents(NewPartPath, "", true, true);
}
else
{
NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{NewPartPath}";
solidWorksDocument.Extension.SelectByID2("D1@Вытянуть1@12-20-001-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Вытянуть[email protected]")));
dimension.SystemValue = h - 0.031;
solidWorksDocument.Extension.SelectByID2("D1@Кривая1@12-20-001-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Кривая[email protected]")));
dimension.SystemValue = weldHeight;
SolidWorksDocument.Extension.SaveAs(NewPartPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath);
ComponentsPathList.Add(NewPartPath);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc(NewPartPath);
}
//12-20-002
PartName = $"12-20-{width}.SLDPRT";
MessageObserver.Instance.SetMessage("Check exist part. " + NewPartPath);
if (CheckExistPart != null)
{
MessageObserver.Instance.SetMessage("\tCheckExistPartEvent");
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
else
{
MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
}
if (IsPartExist)
{
solidWorksDocument.Extension.SelectByID2("12-20-002-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
assemblyDocument.ReplaceComponents(PartName, "", true, true);
}
else
{
NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{NewPartPath}";
solidWorksDocument.Extension.SelectByID2("D1@Вытянуть1@12-20-002-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Вытянуть[email protected]")));
dimension.SystemValue = w - 0.031;
solidWorksDocument.Extension.SelectByID2("D1@Кривая1@12-20-002-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Кривая[email protected]")));
dimension.SystemValue = weldWidth;
SolidWorksDocument.Extension.SaveAs(NewPartPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath);
ComponentsPathList.Add(NewPartPath);
}
//12-003
PartName = $"12-03-{width}-{height}.SLDPRT";
if (CheckExistPart != null)
{
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
else
{
MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
}
if (IsPartExist)
{
solidWorksDocument.Extension.SelectByID2("12-003-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
assemblyDocument.ReplaceComponents(PartName, "", true, true);
}
else
{
NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{NewPartPath}";
solidWorksDocument.Extension.SelectByID2("D3@Эскиз1@12-003-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D3@Эскиз[email protected]")));
dimension.SystemValue = w;
solidWorksDocument.Extension.SelectByID2("D2@Эскиз1@12-003-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D2@Эскиз[email protected]")));
dimension.SystemValue = h;
solidWorksDocument.EditRebuild3();
SolidWorksDocument.Extension.SaveAs(NewPartPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath);
ComponentsPathList.Add(NewPartPath);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc(NewPartPath);
}
}
if (modelName == "12-30")
{
//12-30-001
PartName = $"12-30-{height}.SLDPRT";
MessageObserver.Instance.SetMessage("Check exist part. " + NewPartPath);
if (CheckExistPart != null)
{
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
else
{
MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
}
if (IsPartExist)
{
solidWorksDocument.Extension.SelectByID2("12-30-001-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
assemblyDocument.ReplaceComponents(PartName, "", true, true);
}
else
{
NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{NewPartPath}";
solidWorksDocument.Extension.SelectByID2("D1@Вытянуть1@12-30-001-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Вытянуть[email protected]")));
dimension.SystemValue = h - 0.031;
solidWorksDocument.Extension.SelectByID2("D1@Кривая1@12-30-001-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Кривая[email protected]")));
dimension.SystemValue = weldHeight;
SolidWorksDocument.Extension.SaveAs(NewPartPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath);
ComponentsPathList.Add(NewPartPath);
}
//12-30-002
PartName = $"12-30-{width}.SLDPRT";
if (CheckExistPart != null)
{
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
else
{
MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
}
if (IsPartExist)
{
solidWorksDocument.Extension.SelectByID2("12-30-002-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
assemblyDocument.ReplaceComponents(PartName, "", true, true);
}
else
{
NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{NewPartPath}";
solidWorksDocument.Extension.SelectByID2("D1@Вытянуть1@12-30-002-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Вытянуть[email protected]")));
dimension.SystemValue = w - 0.031;
solidWorksDocument.Extension.SelectByID2("D1@Кривая1@12-30-002-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Кривая[email protected]")));
dimension.SystemValue = weldHeight;
SolidWorksDocument.Extension.SaveAs(NewPartPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath);
ComponentsPathList.Add(NewPartPath);
}
//12-003
PartName = $"12-03-{width}-{height}.SLDPRT";
if (CheckExistPart != null)
{
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
else
{
MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
}
if (IsPartExist)
{
solidWorksDocument.Extension.SelectByID2("12-003-2@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
assemblyDocument.ReplaceComponents(PartName, "", true, true);
}
else
{
NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{NewPartPath}";
solidWorksDocument.Extension.SelectByID2("D3@Эскиз1@12-003-2@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D3@Эскиз[email protected]")));
dimension.SystemValue = w;
solidWorksDocument.Extension.SelectByID2("D2@Эскиз1@12-003-2@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D2@Эскиз[email protected]")));
dimension.SystemValue = h;
solidWorksDocument.EditRebuild3();
SolidWorksDocument.Extension.SaveAs(NewPartPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath);
ComponentsPathList.Add(NewPartPath);
}
}
solidWorksDocument.ForceRebuild3(true);
solidWorksDocument.Extension.SaveAs(newSpigotPath + ".SLDASM", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, newSpigotPath + ".SLDASM");
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc(NewSpigotName + ".SLDASM");
ComponentsPathList.Add(newSpigotPath + ".SLDASM");
swDrawingSpigot.Extension.SelectByID2("DRW1", "SHEET", 0, 0, 0, false, 0, null, 0);
var drw = (DrawingDoc)SolidWorksAdapter.AcativeteDoc(drawingName + ".SLDDRW");
drw.ActivateSheet("DRW1");
drw.SetupSheet5("DRW1", 12, 12, 1, GetDrawingScale(width, height), true, @"\\pdmsrv\SolidWorks Admin\Templates\Основные надписи\A3-A-1.slddrt", 0.42, 0.297, "По умолчанию", false);
swDrawingSpigot.Extension.SaveAs(newSpigotPath + ".SLDDRW", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, newSpigotPath + ".SLDDRW");
ComponentsPathList.Add(newSpigotPath + ".SLDDRW");
SolidWorksAdapter.CloseAllDocumentsAndExit();
return(newSpigotPath);
}
private void AutoDimensionDrawing2(ModelDoc2 swModel, bool many )
{
bool del3List = false;
var thrdList = new List<string>();
int shi = 0;
isValidXml = true;
var swDrawing = (DrawingDoc)swModel;
if (swModel.GetCustomInfoValue("", "AutoDim") == "No")
{
if (many)
{
MessageBox.Show(@"Если хотите образмерить чертеж, смените No на Yes в поле 'AutoDim' свойств данного чертежа",
@"MrDoors", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
isValidXml = false;
}
if (swModel.GetCustomInfoValue("", "MakeCNCprog") == "Yes")
{
_createProgramm = true;
}
if (!isValidXml && !_createProgramm) // если не надо создавать программу и авто дим = но, то образмеривать просто не нужно.
return;
swModel.Extension.SetUserPreferenceDouble((int)swUserPreferenceDoubleValue_e.swDetailingDimToDimOffset,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified, 0.006);
swModel.Extension.SetUserPreferenceDouble((int)swUserPreferenceDoubleValue_e.swDetailingObjectToDimOffset,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified, 0.010);
Dictionary<string, bool> listSide;
string targetModelPath = null;
if (!File.Exists(Path.Combine(Path.GetDirectoryName(_swAdd.RootModel.GetPathName()), "fpTime.txt")))
{
//MessageBox.Show("Образмеривание детали может пройти некорректно! Для корректного образмеривания детали необходимо произвести Окончательную обработку заказа.");
throw new Exception("Образмеривание детали может пройти некорректно! Для корректного образмеривания детали необходимо произвести Окончательную обработку заказа.");
}
else
{
//просто взять Sketch Number
string fnameWithoutExt = Path.GetFileNameWithoutExtension(swModel.GetPathName());
fnameWithoutExt = fnameWithoutExt.Substring(fnameWithoutExt.Length - 4, 4);
SwDMDocument8 swDoc = null;
SwDMApplication swDocMgr = SwAddin.GetSwDmApp();
SwDmDocumentOpenError oe;
SwDmCustomInfoType type;
if (!(fnameWithoutExt[0] == '#' && (fnameWithoutExt[3] == 'P' || fnameWithoutExt[3] == 'p')))
{
swDoc = (SwDMDocument8) swDocMgr.GetDocument(Path.ChangeExtension(swModel.GetPathName(), "SLDASM"),SwDmDocumentType.swDmDocumentAssembly, true, out oe);
}
else
{
object brokenRefVar;
SwDMSearchOption src = swDocMgr.GetSearchOptionObject();
var swDocDraw = (SwDMDocument8)swDocMgr.GetDocument(swModel.GetPathName(), SwDmDocumentType.swDmDocumentDrawing, true, out oe);
var varRef = (object[])swDocDraw.GetAllExternalReferences2(src, out brokenRefVar);
swDocDraw.CloseDoc();
targetModelPath = (string)varRef[0];
swDoc = (SwDMDocument8)swDocMgr.GetDocument(targetModelPath, SwDmDocumentType.swDmDocumentAssembly, true, out oe);
}
if (swDoc != null)
{
var prop = swDoc.GetCustomProperty("Sketch Number", out type);
if (string.IsNullOrEmpty(prop) || prop == "0")
throw new Exception("Образмеривание детали прервано, т.к. может пройти некорректно ! Для корректного образмеривания детали необходимо произвести Окончательную обработку заказа.");
swDoc.CloseDoc();
}
_swAdd.SetModelProperty(swModel, "WasMesure", string.Empty, swCustomInfoType_e.swCustomInfoYesOrNo, "Yes", true);
}
string pathXml = WriteXmlFile(swModel, isValidXml, targetModelPath);
bool isNeededSheetNumber = PrepareDrawingDoc(swModel, out listSide);
bool dimOnlyNew = false;
if (swModel.GetCustomInfoValue("", "DimOnlyNew") == "Yes")
dimOnlyNew = true;
var vSheetNames = (string[])swDrawing.GetSheetNames();
var rootNode = _node;
bool atLeastOneF1View = false;
foreach (var vSheetName in vSheetNames)
{
bool iftherewasAhole = false;
XmlElement element = null;
XmlElement sheetNode = null;
KeyValuePair<string,string> tableNameAttribute = new KeyValuePair<string, string>();
if (_createProgramm && !string.IsNullOrEmpty(pathXml))
{
element = _cxml.CreateElement("Sheet");
element.SetAttribute("Name", vSheetName);
_node = rootNode.AppendChild(element);
sheetNode = element;
}
double vScale = 0;
var type = new List<string>();
var listSize = new List<SizeForDim>();
swDrawing.ActivateSheet(vSheetName);
swModel.Extension.SelectByID2(vSheetName, "SHEET", 0, 0, 0, true,
(int)swSelectionMarkAction_e.swSelectionMarkAppend, null, 0);
swModel.ViewZoomToSelection();
swModel.ClearSelection();
var swSheet = (Sheet)swDrawing.GetCurrentSheet();
var swViews = (object[])swSheet.GetViews();
bool side = shi == 1;
if (isNeededSheetNumber && listSide.ContainsKey(vSheetName.Substring(vSheetName.Length - 1)))
side = listSide[vSheetName.Substring(vSheetName.Length - 1)];
if (vSheetName.ToUpper().Contains("FACE"))
side = true;
if (vSheetName.ToUpper().Contains("BACK"))
side = false;
if (swViews != null)
{
var rootViewElement = _node;
if (Properties.Settings.Default.ViewsBeforeDimen)
ReplaceViews(swViews, swDrawing);
foreach (var t in swViews)
{
#region Образмеривание вида
var swView = (View) t;
swModel.ClearSelection2(true);
const string expr = "^F[1-6]$";
Match isMatch = Regex.Match(swView.Name, expr, RegexOptions.IgnoreCase);
if (_createProgramm && swView.Name.ToLower().Contains("const"))
{
//Logging.Log.Instance.Fatal(@"На данный чертеж программа не будет создана! " + swModel.GetPathName() + "swView.Name = " + swView.Name);
//MessageBox.Show(@"На данный чертеж программа не будет создана!", @"MrDoors",MessageBoxButtons.OK,MessageBoxIcon.Exclamation);
}
if (!(isMatch.Success || swView.Name.Contains("Чертежный вид")) ||
swView.Name.ToLower().Contains("const") ||
swView.Type == (int)swDrawingViewTypes_e.swDrawingDetailView) continue;
if (_createProgramm && !isMatch.Success)
{
_createProgramm = false;
//Logging.Log.Instance.Fatal(@"На данный чертеж программа не будет создана! " + swModel.GetPathName() + "swView.Name = " + swView.Name);
//MessageBox.Show(@"На данный чертеж программа не будет создана!", @"MrDoors",
// MessageBoxButtons.OK, MessageBoxIcon.Exclamation);
}
swDrawing.ActivateView(swView.GetName2());
swView.UseSheetScale = 0;
var list = HideUnusedComponents(swView, dimOnlyNew);
try
{
vScale = ((double[]) swView.ScaleRatio)[1];
swView.SetDisplayMode3(false, (int) swDisplayMode_e.swFACETED_HIDDEN, true, true);
#region Процесс образмеривания
using (var d = new DimensionView(_swApp, BlockPositionExtension.FromBool(side), dimOnlyNew))
{
d.DimView(side);
if (!iftherewasAhole)
iftherewasAhole = d.IsHole;
if (!isNeededSheetNumber && !side && !iftherewasAhole)
del3List = true;
else
{
if (isNeededSheetNumber && !iftherewasAhole)
{
del3List = true;
thrdList.Add(vSheetName);
}
}
foreach (var tp in d.List)
{
if (!type.Contains(tp))
type.Add(tp);
}
listSize.Add(d.AddSize);
#region Запись данных в xml файл
if (element != null)
{
element = _cxml.CreateElement("View");
element.SetAttribute("Name", swView.Name);
if (swView.Name == "F1")
{
atLeastOneF1View = true;
SwDmDocumentOpenError oe;
SwDMApplication swDocMgr = SwAddin.GetSwDmApp();
var swDoc = (SwDMDocument8)swDocMgr.GetDocument(Path.ChangeExtension(swModel.GetPathName(), "SLDASM"),
SwDmDocumentType.swDmDocumentAssembly, true, out oe);
if (swDoc != null)
{
var cit = new SwDmCustomInfoType();
string[] names = swDoc.GetCustomPropertyNames();
string extFeats = null,faner11 = null,faner12 = null,faner21 = null,faner22 = null;
if (names.Contains("ExtFanerFeats"))
extFeats = swDoc.GetCustomProperty("ExtFanerFeats", out cit);
double angle = 57.29577951308232*swView.Angle; //(180/П)
if (Math.Abs(angle) < 0.000001 || Math.Abs(angle + 90) < 0.000001 || Math.Abs(angle - 270) < 0.000001 || Math.Abs(angle - 180) < 0.000001 || Math.Abs(angle - 90) < 0.000001) //!string.IsNullOrEmpty(extFeats) && extFeats == "Yes" &&
{
if (names.Contains("Faner11"))
faner11 = swDoc.GetCustomProperty("Faner11", out cit);
if (names.Contains("Faner12"))
faner12 = swDoc.GetCustomProperty("Faner12", out cit);
if (names.Contains("Faner21"))
faner21 = swDoc.GetCustomProperty("Faner21", out cit);
if (names.Contains("Faner22"))
faner22 = swDoc.GetCustomProperty("Faner22", out cit);
var tmpElem = _cxml.CreateElement("Comment");
string comment = FrmEdge.GetCommentFromProperties(faner11,faner12,faner21,faner22, angle, _swAdd,swModel);
double angle2 = angle + 90;
double angle4 = angle + 180;
double angle3 = angle + 270;
if (angle2 > 270)
angle2 = angle2%360;
if (angle3 > 270)
angle3 = angle3 % 360;
if (angle4 > 270)
angle4 = angle4 % 360;
string comment2 = FrmEdge.GetCommentFromProperties(faner11, faner12, faner21, faner22, angle2, _swAdd, swModel);
string comment3 = FrmEdge.GetCommentFromProperties(faner11, faner12, faner21, faner22, angle3, _swAdd, swModel);
string comment4 = FrmEdge.GetCommentFromProperties(faner11, faner12, faner21, faner22, angle4, _swAdd, swModel);
tmpElem.SetAttribute("Rot270",comment3);
tmpElem.SetAttribute("Rot180",comment4);
tmpElem.SetAttribute("Rot90", comment2);
tmpElem.SetAttribute("Rot0", comment);
rootNode.PrependChild(tmpElem);
}
}
//swDoc.CloseDoc();
//int warnings = 0;
//int errors = 0;
//var swModelDoc = _swApp.OpenDoc6(Path.ChangeExtension(swModel.GetPathName(), "SLDASM"), (int)swDocumentTypes_e.swDocASSEMBLY,
// (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", errors,
// warnings);
//if (!string.IsNullOrEmpty(swModelDoc.CustomInfo2["", "ExtFanerFeats"]) && swModelDoc.CustomInfo2["", "ExtFanerFeats"] == "Yes")
//{
// var tmpElem = _cxml.CreateElement("Comment");
// string comment = FrmEdge.GetComment(swModelDoc, swView.Angle, _swAdd);
// tmpElem.SetAttribute("Rot270", string.Empty);
// tmpElem.SetAttribute("Rot90", string.Empty);
// tmpElem.SetAttribute("Rot0", comment);
// rootNode.PrependChild(tmpElem);
//}
}
if (_node != null)
{
_node = rootViewElement.AppendChild(element);
switch (d.Side)
{
case BlockPosition.LeftTopToRightBottom:
if (swView.Name == "F1")
tableNameAttribute = new KeyValuePair<string, string>("F1","J");
if (swView.Name == "F6")
{
if (tableNameAttribute.Key!="F1") // F1 - приоритетнее
tableNameAttribute = new KeyValuePair<string, string>("F6", "B");
}
if (string.IsNullOrEmpty(tableNameAttribute.Key))
{
tableNameAttribute = new KeyValuePair<string, string>("none","J");
}
break;
case BlockPosition.RightTopToLeftBottom:
if (swView.Name == "F1")
tableNameAttribute = new KeyValuePair<string, string>("F1","B");
if (swView.Name == "F6")
{
if (tableNameAttribute.Key!="F1") // F1 - приоритетнее
tableNameAttribute = new KeyValuePair<string, string>("F6", "J");
}
if (string.IsNullOrEmpty(tableNameAttribute.Key))
{
tableNameAttribute = new KeyValuePair<string, string>("none", "B");
}
break;
case BlockPosition.LeftBottomToRightTop:
case BlockPosition.RigthBottomToLeftTop:
//MessageBox.Show(
// "В этом чертеже начало координат находится внизу. Программа может быть создана некорректно!",
// @"MrDoors", MessageBoxButtons.OK, MessageBoxIcon.Exclamation);
// element = _cxml.CreateElement("Table");
// element.SetAttribute("Name", "Не удалось определить наименование стола!");
//_node=_node.AppendChild(element);
break;
}
}
int i = 0;
string id = "id" + i;
element = _cxml.CreateElement(id);
element.SetAttribute("X", Math.Round(d.X).ToString(CultureInfo.CreateSpecificCulture("ru-RU")));
element.SetAttribute("Y", Math.Round(d.Y).ToString(CultureInfo.CreateSpecificCulture("ru-RU")));
if (swView.Name == "F1" || swView.Name == "F6")
element.SetAttribute("Z", _z.ToString(CultureInfo.CreateSpecificCulture("ru-RU")));
if (_node != null)
_node.AppendChild(element);
foreach (var ls in d.ListSize)
{
i++;
id = "id" + i;
element = _cxml.CreateElement(id);
element.SetAttribute("X", ls.X.ToString(CultureInfo.CreateSpecificCulture("ru-RU")));
element.SetAttribute("Y", ls.Y.ToString(CultureInfo.CreateSpecificCulture("ru-RU")));
element.SetAttribute("Diameter", ls.Diameter.ToString(CultureInfo.CreateSpecificCulture("ru-RU")));
element.SetAttribute("Depth",ls.Depth.ToString(CultureInfo.CreateSpecificCulture("ru-RU")));
if (_node != null)
_node.AppendChild(element);
}
_node = _node.ParentNode;
}
#endregion
}
#endregion
swView.SetDisplayMode3(false, (int) swDisplayMode_e.swFACETED_HIDDEN_GREYED, true, true);
swDrawing.ActivateSheet(vSheetName);
}
catch (Exception e)
{
MessageBox.Show(@"Ошибка при образмеривании! " + e.Message, @"MrDoors",
MessageBoxButtons.OK, MessageBoxIcon.Error);
}
finally
{
if (dimOnlyNew)
ShowHiddenComponents(list);
}
#endregion
}
}
if (type.Count != 0)
LegendMaker(swModel, swDrawing, type, vScale);
if (!string.IsNullOrEmpty(tableNameAttribute.Value))
sheetNode.SetAttribute("TableName", tableNameAttribute.Value);
if (Properties.Settings.Default.ScaleWhenDimen && !del3List && shi != 0)
AutoScaleSheet(listSize, swSheet, vScale, side);
shi++;
if(_node!=null)
_node = _node.ParentNode;
AutoArrangeDimentions(vSheetName,dimOnlyNew);
}
swModel.EditRebuild3();
if (shi == 3)
{
if (del3List)
{
if (isNeededSheetNumber && thrdList.Count > 0)
foreach (var sh in thrdList)
swModel.Extension.SelectByID2(sh, "SHEET", 0, 0, 0, true, 0, null, 0);
else
{
if (!swModel.Extension.SelectByID2("Лист3", "SHEET", 0, 0, 0, false, 0, null, 0))
{
swModel.Extension.SelectByID2("Back3", "SHEET", 0, 0, 0, false, 0, null, 0);
}
}
swModel.DeleteSelection(true);
}
else
SheetNumering(swModel, swDrawing);
}
swModel.ForceRebuild3(false);
bool writeXml = true;
if (atLeastOneF1View)
{
try
{
writeXml=SomeLogicChanges(swModel);
}
catch(Exception e)
{
if (swModel.GetPathName() != null)
Logging.Log.Instance.Fatal(e, "Ошибка при применении логики к XML. " + swModel.GetPathName());
else
Logging.Log.Instance.Fatal(e, "Ошибка при применении логики к XML. ");
}
if (writeXml)
StopWriteXml(pathXml);
}
return;
}
public void StoreToSelection(SelectionMgr swSelMgr, ref AttributeDef mdefattr_chbody)//, ref AttributeDef defattr_chconveyor)
{
System.Windows.Forms.MessageBox.Show("StoreToSelection()");
// If user pressed OK, apply settings to all selected parts (i.e. ChBody in C::E):
for (int isel = 1; isel <= swSelMgr.GetSelectedObjectCount2(-1); isel++)
{
if ((swSelectType_e)swSelMgr.GetSelectedObjectType3(isel, -1) == swSelectType_e.swSelCOMPONENTS)
{
Component2 swPart = (Component2)swSelMgr.GetSelectedObject6(isel, -1);
ModelDoc2 swPartModel = (ModelDoc2)swPart.GetModelDoc();
// fetch SW attribute with Chrono parameters for ChBody
SolidWorks.Interop.sldworks.Attribute myattr = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(mdefattr_chbody, 0);
if (myattr == null)
{
// if not already added to part, create and attach it
myattr = mdefattr_chbody.CreateInstance5(swPartModel, swPart, "Chrono ChBody data", 0, (int)swInConfigurationOpts_e.swThisConfiguration);
swPartModel.ForceRebuild3(false); // needed?
if (myattr == null)
{
System.Windows.Forms.MessageBox.Show("myattr null in setting!!");
}
}
((Parameter)myattr.GetParameter("collision_on")).SetDoubleValue2(
Convert.ToDouble(m_collide), (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("friction")).SetDoubleValue2(
m_friction, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("rolling_friction")).SetDoubleValue2(
m_rolling_friction, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("spinning_friction")).SetDoubleValue2(
m_spinning_friction, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("restitution")).SetDoubleValue2(
m_restitution, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("collision_margin")).SetDoubleValue2(
m_collision_margin, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("collision_envelope")).SetDoubleValue2(
m_collision_envelope, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("collision_family")).SetDoubleValue2(
(double)m_collision_family, (int)swInConfigurationOpts_e.swThisConfiguration, "");
/*
* // fetch SW attribute with Chrono parameters for ChConveyor
* SolidWorks.Interop.sldworks.Attribute myattr_conveyor = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(defattr_chconveyor, 0);
* if (myattr_conveyor == null)
* {
* // if not already added to part, create and attach it
* myattr_conveyor = defattr_chconveyor.CreateInstance5(swPartModel, swPart, "Chrono ChConveyor data", 0, (int)swInConfigurationOpts_e.swThisConfiguration);
* if (myattr_conveyor == null)
* System.Windows.Forms.MessageBox.Show("myattr null in setting!!");
* }
*
* ((Parameter)myattr_conveyor.GetParameter("conveyor_speed")).SetDoubleValue2(
* m_conveyor_speed, (int)swInConfigurationOpts_e.swThisConfiguration, "");
*/
}
}
}
public void UpdateFromSelection(SelectionMgr swSelMgr, ref AttributeDef mdefattr_chbody)//, ref AttributeDef defattr_chconveyor)
{
// Fetch current properties from the selected part(s) (i.e. ChBody in C::E)
for (int isel = 1; isel <= swSelMgr.GetSelectedObjectCount2(-1); isel++)
{
if ((swSelectType_e)swSelMgr.GetSelectedObjectType3(isel, -1) == swSelectType_e.swSelCOMPONENTS)
{
Component2 swPart = (Component2)swSelMgr.GetSelectedObject6(isel, -1);
ModelDoc2 swPartModel = (ModelDoc2)swPart.GetModelDoc();
// fetch SW attribute with Chrono parameters for ChBody
SolidWorks.Interop.sldworks.Attribute myattr = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(mdefattr_chbody, 0);
if (myattr == null)
{
// if not already added to part, create and attach it
myattr = mdefattr_chbody.CreateInstance5(swPartModel, swPart, "Chrono::ChBody_data", 0, (int)swInConfigurationOpts_e.swAllConfiguration);
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityInvalid))
{
System.Windows.Forms.MessageBox.Show("swIsEntityInvalid!");
}
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntitySuppressed))
{
System.Windows.Forms.MessageBox.Show("swIsEntitySuppressed!");
}
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityAmbiguous))
{
System.Windows.Forms.MessageBox.Show("swIsEntityAmbiguous!");
}
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityDeleted))
{
System.Windows.Forms.MessageBox.Show("swIsEntityDeleted!");
}
swPartModel.ForceRebuild3(false); // needed?
}
Set_collision_on(Convert.ToBoolean(((Parameter)myattr.GetParameter(
"collision_on")).GetDoubleValue()));
Set_friction(((Parameter)myattr.GetParameter(
"friction")).GetDoubleValue());
Set_rolling_friction(((Parameter)myattr.GetParameter(
"rolling_friction")).GetDoubleValue());
Set_spinning_friction(((Parameter)myattr.GetParameter(
"spinning_friction")).GetDoubleValue());
Set_restitution(((Parameter)myattr.GetParameter(
"restitution")).GetDoubleValue());
Set_collision_envelope(((Parameter)myattr.GetParameter(
"collision_envelope")).GetDoubleValue());
Set_collision_margin(((Parameter)myattr.GetParameter(
"collision_margin")).GetDoubleValue());
Set_collision_family((int)((Parameter)myattr.GetParameter(
"collision_family")).GetDoubleValue());
// fetch SW attribute with Chrono parameters for ChConveyor
/*
* SolidWorks.Interop.sldworks.Attribute myattr_conv = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(defattr_chconveyor, 0);
* if (myattr_conv == null)
* {
* // if not already added to part, create and attach it
* //myattr_conv = defattr_chconveyor.CreateInstance5(swPartModel, swPart, "Chrono::ChConveyor_data", 0, (int)swInConfigurationOpts_e.swThisConfiguration);
* }
*/
/*
* // fetch SW attribute with Chrono parameters for ChConveyor (if any!)
* SolidWorks.Interop.sldworks.Attribute myattr_conveyor = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(defattr_chconveyor, 0);
* if (myattr_conveyor != null)
* {
* show_conveyor_params = true;
*
* Set_conveyor_speed(((Parameter)myattr_conveyor.GetParameter(
* "conveyor_speed")).GetDoubleValue());
* }
*/
}
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
KCJSB265 item = (KCJSB265)objKCJSB265Service.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
ModelDocExtension swModelDocExt = default(ModelDocExtension);
bool status = false;
string compReName = string.Empty;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称
swModelDocExt = (ModelDocExtension)swModel.Extension;
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true);
//TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
int fcNo = (int)((item.Length - item.FCSideLeft - item.FCSideRight) / 499m) - item.FCBlindNo;
try
{
//----------Top Level----------
//判断FC数量，FC侧板长度
if (item.FCBlindNo > 0)
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0107[BP-500]{500}-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swFeat = swAssy.FeatureByName("LocalLPattern3");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern3").SystemValue = item.FCBlindNo; //D1阵列数量,D3阵列距离
swModel.Parameter("D1@Distance11").SystemValue = item.FCSideLeft / 1000m;
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0107[BP-500]{500}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swFeat = swAssy.FeatureByName("LocalLPattern3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//判断FC/KSA
if (item.FCType == "KSA")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5202040401-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern4");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern4").SystemValue = fcNo; //D1阵列数量,D3阵列距离
swModel.Parameter("D1@Distance9").SystemValue = (item.FCSideLeft + 500m * item.FCBlindNo) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "KCJ FC FILTER-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "KCJ FC FILTER-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern2");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern2").SystemValue = fcNo; //D1阵列数量,D3阵列距离
swModel.Parameter("D1@Distance10").SystemValue = (item.FCSideLeft + 500m * item.FCBlindNo) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5202040401-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//----------油网侧板----------
switch (item.FCSide)
{
case "LEFT":
//重命名装配体内部
if (item.FCType == "KSA")
{
compReName = "FNCE0108[BP-" + tree.Module + "]{" + (int)(item.FCSideLeft + fcNo * 2.5m) + "}";
}
else
{
compReName = "FNCE0108[BP-" + tree.Module + "]{" + (int)(item.FCSideLeft - 4m) + "}";
}
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
if (item.FCType == "KSA")
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft + fcNo * 2.5m) / 1000m;
}
else
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft - 4m) / 1000m;
}
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
case "RIGHT":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
//重命名装配体内部
if (item.FCType == "KSA")
{
compReName = "FNCE0109[BP-" + tree.Module + "]{" + (int)(item.FCSideRight + fcNo * 2.5m) + "}";
}
else
{
compReName = "FNCE0109[BP-" + tree.Module + "]{" + (int)(item.FCSideRight - 4m) + "}";
}
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
if (item.FCType == "KSA")
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight + fcNo * 2.5m) / 1000m;
}
else
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight - 4m) / 1000m;
}
}
break;
case "BOTH":
//重命名装配体内部
if (item.FCType == "KSA")
{
compReName = "FNCE0108[BP-" + tree.Module + ".1]{" + (int)(item.FCSideLeft + fcNo * 1.25m) + "}";
}
else
{
compReName = "FNCE0108[BP-" + tree.Module + "]{" + (int)(item.FCSideLeft - 2m) + "}";
}
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
if (item.FCType == "KSA")
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft + fcNo * 1.25m) / 1000m;
}
else
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft - 2m) / 1000m;
}
}
//重命名装配体内部
if (item.FCType == "KSA")
{
compReName = "FNCE0109[BP-" + tree.Module + ".2]{" + (int)(item.FCSideRight + fcNo * 1.25m) + "}";
}
else
{
compReName = "FNCE0109[BP-" + tree.Module + "]{" + (int)(item.FCSideRight - 2m) + "}";
}
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
if (item.FCType == "KSA")
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight + fcNo * 1.25m) / 1000m;
}
else
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight - 2m) / 1000m;
}
}
break;
default:
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
}
//----------日本项目需要压缩零件----------
if (item.Japan == "YES")
{
//吊装垫片
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-9"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//排风脖颈
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXSPIGOT-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
//排风滑门
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXDOOR-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
//排风腔
//重命名装配体内部
compReName = "FNCE0125[KCJSB265-" + tree.Module + "]{" + (int)item.Length + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0125-2") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-2" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-2");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Aufsatz-Linear austragen1").SystemValue = item.Length / 1000m;
swFeat = swComp.FeatureByName("EX");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("Cut-Extrude4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
if (item.MARVEL == "YES")
{
swFeat = swComp.FeatureByName("MA-NTC");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA-TAB");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("MA-NTC");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA-TAB");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
}
else
{
//吊装垫片
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-9"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(2, 2, configNames); //参数1：1解压，0压缩
//排风脖颈
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXSPIGOT-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0019-1"));
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@基体-法兰1").SystemValue = (item.ExLength + 50m) / 1000m;
swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m;
swFeat = swComp.FeatureByName("ANSUL");
if (item.ANSUL == "YES")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0020-1"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D2@基体-法兰1").SystemValue = (item.ExLength + 50m) / 1000m;
swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0047-1"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D2@基体-法兰1").SystemValue = item.ExWidth / 1000m;
swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m;
swFeat = swComp.FeatureByName("ANDTEC");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0048-2"));
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@基体-法兰1").SystemValue = item.ExWidth / 1000m;
swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m;
swFeat = swComp.FeatureByName("ANDTEC");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//排风滑门
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXDOOR-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Distance3").SystemValue = (item.ExWidth + 20m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0018-1"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.ExLength * 2m + 100m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0013-1"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D1@Sketch1").SystemValue = (item.ExLength / 2m + 10m) / 1000m;
swPart.Parameter("D2@Sketch1").SystemValue = (item.ExWidth + 40m) / 1000m;
//排风腔
//重命名装配体内部
compReName = "FNCE0125[KCJSB265-" + tree.Module + "]{" + (int)item.Length + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0125-2") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-2" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-2");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Aufsatz-Linear austragen1").SystemValue = item.Length / 1000m;
swFeat = swComp.FeatureByName("EX");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("Cut-Extrude4");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch2").SystemValue = item.ExRightDis / 1000m;
swPart.Parameter("D1@Sketch2").SystemValue = item.ExLength / 1000m;
swPart.Parameter("D2@Sketch2").SystemValue = item.ExWidth / 1000m;
if (item.ANSUL == "YES")
{
//侧喷
if (item.ANSide == "LEFT")
{
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else if (item.ANSide == "RIGHT")
{
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//探测器
if (item.ANDetector == "LEFT")
{
swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else if (item.ANDetector == "RIGHT")
{
swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.ANDetector == "BOTH")
{
swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
else
{
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
if (item.MARVEL == "YES")
{
swFeat = swComp.FeatureByName("MA-NTC");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA-TAB");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("MA-NTC");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA-TAB");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
}
//----------SSP灯板支撑条----------
if (item.SSPType == "DOME")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0036-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0035-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Sketch1").SystemValue = item.Length / 1000m;
if (item.Gutter == "YES")
{
swModel.Parameter("D1@Distance12").SystemValue = item.GutterWidth / 1000m;
}
else
{
swModel.Parameter("D1@Distance12").SystemValue = 0.5m / 1000m;
}
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0036-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Sketch1").SystemValue = item.Length / 1000m;
if (item.Gutter == "YES")
{
swModel.Parameter("D1@Distance2").SystemValue = item.GutterWidth / 1000m;
}
else
{
swModel.Parameter("D1@Distance2").SystemValue = 0.5m / 1000m;
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0035-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Item + "-" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Item + "-" + tree.Module + "-" +
tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
ABD200 item = (ABD200)objABD200Service.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true); //TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
//铆钉数量
int rivetNo = (int)((item.Length - 47m) / 400m);
decimal rivetDis = (item.Length - 47m) / rivetNo;
try
{
//----------Top Level----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHO0136-1"));
swPart = swComp.GetModelDoc2();//打开零件3
swPart.Parameter("D1@Sketch1").SystemValue = (item.Length - 5m) / 1000m;
if (item.Length == 400m || item.Length == 500m)
{
swFeat = swComp.FeatureByName("MIDDLE");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("300");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("MIDDLE");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("300");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHO0134-1"));
swPart = swComp.GetModelDoc2();//打开零件3
swPart.Parameter("D12@Sketch1").SystemValue = (item.Length - 6m) / 1000m;
if (item.Length == 400m || item.Length == 750m)
{
swPart.Parameter("D5@Sketch27").SystemValue = 28.5m / 1000m;
}
else
{
swPart.Parameter("D5@Sketch27").SystemValue = 78.5m / 1000m;
}
swFeat = swComp.FeatureByName("750");
if (item.Length == 750m)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHO0135-2"));
swPart = swComp.GetModelDoc2();//打开零件3
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 25m) / 1000m;
if (item.Length == 400m || item.Length == 750m)
{
swPart.Parameter("D4@Sketch7").SystemValue = 17.5m / 1000m;
}
else
{
swPart.Parameter("D4@Sketch7").SystemValue = 67.5m / 1000m;
}
swFeat = swComp.FeatureByName("750");
if (item.Length == 750m)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0006-1"));
swPart = swComp.GetModelDoc2();//打开零件3
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length + 50m) / 1000m;
swFeat = swComp.FeatureByName("ABD");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
if (item.Length == 400m || item.Length == 500m)
{
swFeat = swComp.FeatureByName("ABD-MIDDLE");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ABD-300");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("ABD-MIDDLE");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ABD-300");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0007-1"));
swPart = swComp.GetModelDoc2();//打开零件3
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length + 50m) / 1000m;
swFeat = swComp.FeatureByName("ABD");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
if (item.Length == 400m || item.Length == 500m)
{
swFeat = swComp.FeatureByName("ABD-MIDDLE");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ABD-300");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("ABD-MIDDLE");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ABD-300");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
LFUSA item = (LFUSA)objLFUSAService.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
ModelDocExtension swModelDocExt = default(ModelDocExtension);
bool status = false;
string compReName = string.Empty;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称
swModelDocExt = (ModelDocExtension)swModel.Extension;
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true);
//TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
try
{
//----------Top Level----------
//----------散流器主体----------
//重命名装配体内部
compReName = "FNCA0001[LFUSA-" + tree.Module + "]{" + (int)item.Length + "}(" + (int)item.Width + ")";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCA0001-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Base-Flange1").SystemValue = item.Length / 1000m;
swPart.Parameter("D1@Sketch1").SystemValue = (item.Width - 2m) / 1000m;
swPart.Parameter("D2@Sketch2").SystemValue = item.SuDia / 1000m;
swPart.Parameter("D1@Sketch2").SystemValue =
(item.SuDis * (item.SuNo / 2m - 1m) + item.SuDis / 2m) / 1000m;
if (item.SuNo < 2)
{
swFeat = swComp.FeatureByName("LPattern1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("LPattern1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@LPattern1").SystemValue = item.SuNo;
swPart.Parameter("D3@LPattern1").SystemValue = item.SuDis / 1000m;
}
swFeat = swComp.FeatureByName("HANGERHOLE");
if (item.Japan == "YES")
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("CUTLEFT");
if (item.SidePanel == "LEFT" || item.SidePanel == "BOTH")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("CUTRIGHT");
if (item.SidePanel == "RIGHT" || item.SidePanel == "BOTH")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
//----------侧板----------
switch (item.SidePanel)
{
case "LEFT":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Sketch1").SystemValue = (item.Width - 2m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-4"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D9@Skizze1").SystemValue = (item.Width - 2m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
case "RIGHT":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-4"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-3"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Sketch1").SystemValue = (item.Width - 2m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-3"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D9@Skizze1").SystemValue = (item.Width - 2m) / 1000m;
break;
case "MIDDLE":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-4"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-3"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D9@Skizze1").SystemValue = (item.Width - 2m) / 1000m;
break;
default:
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Sketch1").SystemValue = (item.Width - 2m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-4"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-3"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
}
if (item.Japan == "YES")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-9"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-9"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
private void InitTableData()
{
md = (ModelDoc2)DrawingPropertySet.SwApp.ActiveDoc;
mde = md.Extension;
fracdisp = mde.GetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalDisplay,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified);
//int den = mde.GetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearFractionDenominator,
// (int)swUserPreferenceOption_e.swDetailingNoOptionSpecified);
decs = mde.GetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalPlaces,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified);
decd = mde.GetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalDisplay,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified);
try {
mde.SetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalDisplay,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified, (int)swFractionDisplay_e.swDECIMAL);
mde.SetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalPlaces,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified, 3);
mde.SetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalDisplay,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified, 3);
md.ForceRebuild3(false);
table = new swTableType.swTableType((DrawingPropertySet.SwApp.ActiveDoc as ModelDoc2),
Redbrick.MasterHashes);
} catch (NullReferenceException nre) {
if (_swApp != null) {
Redbrick.InsertBOM(_swApp);
InitTableData();
} else {
throw new NullReferenceException(@"No table found.");
}
} catch (Exception e) {
RedbrickErr.ErrMsg em = new RedbrickErr.ErrMsg(e);
em.ShowDialog();
Close();
} finally {
//
}
}
public void Build(Vector3 frameSize, int profileType, ServiceSide serviceSide)
{
string caseAssemblyPath = Path.Combine(RootFolder, SourceFolder, modelName);
Patterns.Observer.MessageObserver.Instance.SetMessage("\n" + caseAssemblyPath + "\n");
ModelDoc2 SolidWorksDocument = SolidWorksAdapter.OpenDocument(caseAssemblyPath, swDocumentTypes_e.swDocASSEMBLY);// SolidWorksDocumentumentTypes_e.SolidWorksDocumentASSEMBLY);
Patterns.Observer.MessageObserver.Instance.SetMessage("открылась сборка");
//AssemblyDocument = SolidWorksAdapter.ToAssemblyDocument( SolidWorksDocument);
double rivetL;
string newName = "01-P150-45-" + (frameSize.Z - 140);
string newPartPath = GetFrameCasePath(newName);
if (File.Exists(new FileInfo(newPartPath).FullName))
{
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(modelName);
SolidWorksDocument.Extension.SelectByID2("01-P150-45-1640-27@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, false, 0, null, 0);
AssemblyDocument.ReplaceComponents(newPartPath, "", true, true);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc("01-P150-45-1640.SLDPRT");
}
else if (File.Exists(newPartPath) != true) // TO DO delegate
{
rivetL = (Math.Truncate((frameSize.Z - 170) / step) + 1) * 1000;
parameters.Add("D1@Вытянуть1", frameSize.Z - 140);
parameters.Add("D1@Кривая1", rivetL);
EditPartParameters("01-P150-45-1640", newPartPath, 0);
//frameSize.X
newName = "01-P150-45-" + (frameSize.X - 140);
newPartPath = GetFrameCasePath(newName);
if (File.Exists(new FileInfo(newPartPath).FullName))
{
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(modelName);
SolidWorksDocument.Extension.SelectByID2("01-003-50-22@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, false, 0, null, 0);
AssemblyDocument.ReplaceComponents(newPartPath, "", true, true);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc("01-003-50.SLDPRT");
}
else
{
rivetL = (Math.Truncate((frameSize.X - 170) / step) + 1) * 1000;
parameters.Add("D1@Вытянуть1", frameSize.X - 140);
parameters.Add("D1@Кривая1", rivetL);
EditPartParameters("01-P150-45-1640", newPartPath, 0);
}
//01-P252-45-770
newName = "01-P252-45-" + (frameSize.X - 100);
newPartPath = newPartPath = GetFrameCasePath(newName);
if (File.Exists(new FileInfo(newPartPath).FullName))
{
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(modelName);
SolidWorksDocument.Extension.SelectByID2("01-P252-45-770-6@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, false, 0, null, 0);
AssemblyDocument.ReplaceComponents(newPartPath, "", true, true);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc("01-P252-45-770.SLDPRT");
}
else
{
parameters.Add("D1@Вытянуть1", frameSize.X - 100);
EditPartParameters("01-P150-45-1640", newPartPath, 0);
}
//frameSize.Y
newName = "01-P150-45-" + (frameSize.Y - 140);
newPartPath = newPartPath = GetFrameCasePath(newName);
if (File.Exists(new FileInfo(newPartPath).FullName))
{
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(modelName);
SolidWorksDocument.Extension.SelectByID2("01-P150-45-510-23@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, false, 0, null, 0);
AssemblyDocument.ReplaceComponents(newPartPath, "", true, true);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc("01-P150-45-510.SLDPRT");
}
else
{
rivetL = (Math.Truncate((frameSize.Y - 170) / step) + 1) * 1000;
parameters.Add("D1@Вытянуть1", (frameSize.Y - 140));
parameters.Add("D1@Кривая1", rivetL);
EditPartParameters("01-P150-45-1640", newPartPath, 0);
}
// 01-P252-45-550
newName = "01-P252-45-" + (frameSize.Y - 100);
newPartPath = newPartPath = GetFrameCasePath(newName);
if (File.Exists(new FileInfo(newPartPath).FullName))
{
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(modelName);
SolidWorksDocument.Extension.SelectByID2("01-P252-45-550-10@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, false, 0, null, 0);
AssemblyDocument.ReplaceComponents(newPartPath, "", true, true);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc("01-P252-45-550.SLDPRT");
}
else
{
parameters.Add("D1@Вытянуть1", frameSize.Y - 100);
EditPartParameters("01-P252-45-550", newPartPath, 0);
}
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(modelName);
SolidWorksDocument.EditRebuild3();
SolidWorksDocument.ForceRebuild3(true);
// AssemblyDocument = (AssemblyDoc)SolidWorksDocument;
if (serviceSide == ServiceSide.Left)
{
SolidWorksDocument.Extension.SelectByID2("M8-Panel block-one side-1@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("M8-Panel block-one side-6@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("M8-Panel block-one side-7@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("Threaded Rivets с насечкой-10@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("Threaded Rivets с насечкой-4@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("Threaded Rivets с насечкой-12@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("Threaded Rivets с насечкой-12@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.EditDelete();
}
else if (serviceSide == ServiceSide.Right)
{
SolidWorksDocument.Extension.SelectByID2("M8-Panel block-one side-16@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("Threaded Rivets с насечкой-21@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("Threaded Rivets с насечкой-22@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("M8-Panel block-one side-17@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("Threaded Rivets с насечкой-23@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("M8-Panel block-one side-18@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("M8-Panel block-one side-18@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.EditDelete();
}
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
LLEDS item = (LLEDS)objLLEDSService.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
ModelDocExtension swModelDocExt = default(ModelDocExtension);
bool status = false;
string compReName = string.Empty;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称
swModelDocExt = (ModelDocExtension)swModel.Extension;
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true);
//TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
int stdPanelNo = (int)((item.Length - 300.5m) / 1500m);//1500+300直接做成一块
decimal sideLength = item.Length - stdPanelNo * 1500m;
int ledNo = (int)((sideLength - 300m) / 500m);
try
{
//----------Top Level----------
swModel.Parameter("D1@Distance3").SystemValue = item.Length / 1000m;
//----------边缘板----------
//重命名装配体内部
compReName = "FNCL0023[LLEDS-" + tree.Module + "]{" + (int)sideLength + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCL0023[LLEDS-]{}-2") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-2" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-2");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Skizze1").SystemValue = sideLength / 1000m;
swFeat = swComp.FeatureByName("LPattern1");
if (ledNo > 0)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@LPattern1").SystemValue = ledNo + 1;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
//----------标准板----------
if (stdPanelNo > 0)
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCL0022[LLEDS-STD]{1483}-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCL0022[LLEDS-STD]{1483}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
swFeat = swAssy.FeatureByName("LocalLPattern1");
if (stdPanelNo > 1)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern1").SystemValue = stdPanelNo;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
public void UpdateFromSelection(SelectionMgr swSelMgr, ref AttributeDef mdefattr_chbody)//, ref AttributeDef defattr_chconveyor)
{
// Fetch current properties from the selected part(s) (i.e. ChBody in C::E)
for (int isel = 1; isel <= swSelMgr.GetSelectedObjectCount2(-1); isel++)
{
if ((swSelectType_e)swSelMgr.GetSelectedObjectType3(isel, -1) == swSelectType_e.swSelCOMPONENTS)
{
//Component2 swPart = (Component2)swSelMgr.GetSelectedObject6(isel, -1);
Component2 swPart = swSelMgr.GetSelectedObjectsComponent3(isel, -1);
ModelDoc2 swPartModel = (ModelDoc2)swPart.GetModelDoc2();
Component2 swPartcorr = swPartModel.Extension.GetCorresponding(swPart); // ***TODO*** for instanced parts? does not work...
swPartcorr = swPart; // ***TODO***
if (swPartModel.GetType() == (int)swDocumentTypes_e.swDocASSEMBLY)
{
if (swPart.Solving == (int)swComponentSolvingOption_e.swComponentFlexibleSolving)
{
System.Windows.Forms.MessageBox.Show("Fexible assemblies not supported as ChBody (set as Rigid?)");
return;
}
if (swPart.Solving == (int)swComponentSolvingOption_e.swComponentRigidSolving)
{
System.Windows.Forms.MessageBox.Show("Setting props to rigid assembly as ChBody");
AssemblyDoc swAssemblyDoc = (AssemblyDoc)swPartModel;
swPart.Select(false);
swAssemblyDoc.EditAssembly();
swAssemblyDoc.EditRebuild();
//return;
}
}
// fetch SW attribute with Chrono parameters for ChBody
SolidWorks.Interop.sldworks.Attribute myattr = null;
if (swPartcorr != null)
{
myattr = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(mdefattr_chbody, 0);
}
if (myattr == null)
{
// if not already added to part, create and attach it
//System.Windows.Forms.MessageBox.Show("Create data");
myattr = mdefattr_chbody.CreateInstance5(swPartModel, swPartcorr, "Chrono::ChBody_data", 0, (int)swInConfigurationOpts_e.swAllConfiguration);
swPartModel.ForceRebuild3(false); // needed, but does not work...
//swPartModel.Rebuild((int)swRebuildOptions_e.swRebuildAll); // needed but does not work...
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityInvalid))
{
System.Windows.Forms.MessageBox.Show("swIsEntityInvalid!");
}
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntitySuppressed))
{
System.Windows.Forms.MessageBox.Show("swIsEntitySuppressed!");
}
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityAmbiguous))
{
System.Windows.Forms.MessageBox.Show("swIsEntityAmbiguous!");
}
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityDeleted))
{
System.Windows.Forms.MessageBox.Show("swIsEntityDeleted!");
}
}
Set_collision_on(Convert.ToBoolean(((Parameter)myattr.GetParameter(
"collision_on")).GetDoubleValue()));
Set_friction(((Parameter)myattr.GetParameter(
"friction")).GetDoubleValue());
Set_rolling_friction(((Parameter)myattr.GetParameter(
"rolling_friction")).GetDoubleValue());
Set_spinning_friction(((Parameter)myattr.GetParameter(
"spinning_friction")).GetDoubleValue());
Set_restitution(((Parameter)myattr.GetParameter(
"restitution")).GetDoubleValue());
Set_collision_envelope(((Parameter)myattr.GetParameter(
"collision_envelope")).GetDoubleValue());
Set_collision_margin(((Parameter)myattr.GetParameter(
"collision_margin")).GetDoubleValue());
Set_collision_family((int)((Parameter)myattr.GetParameter(
"collision_family")).GetDoubleValue());
// fetch SW attribute with Chrono parameters for ChConveyor
/*
* SolidWorks.Interop.sldworks.Attribute myattr_conv = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(defattr_chconveyor, 0);
* if (myattr_conv == null)
* {
* // if not already added to part, create and attach it
* //myattr_conv = defattr_chconveyor.CreateInstance5(swPartModel, swPart, "Chrono::ChConveyor_data", 0, (int)swInConfigurationOpts_e.swThisConfiguration);
* }
*/
/*
* // fetch SW attribute with Chrono parameters for ChConveyor (if any!)
* SolidWorks.Interop.sldworks.Attribute myattr_conveyor = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(defattr_chconveyor, 0);
* if (myattr_conveyor != null)
* {
* show_conveyor_params = true;
*
* Set_conveyor_speed(((Parameter)myattr_conveyor.GetParameter(
* "conveyor_speed")).GetDoubleValue());
* }
*/
}
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
UCJDB800 item = (UCJDB800)objUCJDB800Service.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
ModelDocExtension swModelDocExt = default(ModelDocExtension);
bool status = false;
string compReName = string.Empty;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称
swModelDocExt = (ModelDocExtension)swModel.Extension;
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true);
//TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
int fcNo = (int)((item.Length - item.FCSideLeft - item.FCSideRight) / 499m) - item.FCBlindNo;
try
{
//----------Top Level----------
//判断FC数量，FC侧板长度
if (item.FCBlindNo > 0)
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0107[BP-500]{500}-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0107[BP-500]{500}-5"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swFeat = swAssy.FeatureByName("LocalLPattern4");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern4").SystemValue = item.FCBlindNo; //D1阵列数量,D3阵列距离
swModel.Parameter("D1@Distance29").SystemValue = item.FCSideLeft / 1000m;
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0107[BP-500]{500}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0107[BP-500]{500}-5"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swFeat = swAssy.FeatureByName("LocalLPattern4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "UCJ FC COMBI-12"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "UCJ FC COMBI-15"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern3");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern3").SystemValue = fcNo; //D1阵列数量,D3阵列距离
swModel.Parameter("D1@Distance35").SystemValue = (item.FCSideLeft + 500m * item.FCBlindNo) / 1000m;
//----------HCL----------
if (item.LightType == "HCL")
{
//灯腔
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0054-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Linear austragen1").SystemValue = item.Length / 1000m;
swFeat = swComp.FeatureByName("LIGHT T8");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FC SUPPORT");
swFeat.SetSuppression2(2, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FC SUPPORT B");
swFeat.SetSuppression2(2, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("JAP LED M8");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
if (item.LightCable == "LEFT")
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.LightCable == "RIGHT")
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0066-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0066-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0069-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 5m) / 1000m;
swPart.Parameter("D1@LPattern1").SystemValue = fcNo + item.FCBlindNo;
swPart.Parameter("D3@Sketch6").SystemValue = (item.FCSideLeft + 250m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0071-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 5m) / 1000m;
swPart.Parameter("D1@LPattern1").SystemValue = fcNo + item.FCBlindNo;
swPart.Parameter("D3@Sketch6").SystemValue = (item.FCSideLeft + 250m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0116-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0114-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0114-4"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0145-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0161-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
else
{
//灯腔
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0054-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0066-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0066-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0069-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0071-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0116-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Linear austragen1").SystemValue = item.Length / 1000m;
swFeat = swComp.FeatureByName("LIGHT T8");
if (item.LightType == "T8")
{
swFeat.SetSuppression2(2, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("FC SUPPORT");
swFeat.SetSuppression2(2, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FC SUPPORT B");
swFeat.SetSuppression2(2, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("JAP LED M8");
if (item.Japan == "YES")
{
swFeat.SetSuppression2(2, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
if (item.LightCable == "LEFT")
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.LightCable == "RIGHT")
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0114-3"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0114-4"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0145-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 5m) / 1000m;
swPart.Parameter("D1@LPattern1").SystemValue = fcNo + item.FCBlindNo;
swPart.Parameter("D3@Sketch6").SystemValue = (item.FCSideLeft + 250m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0161-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 5m) / 1000m;
swPart.Parameter("D1@LPattern1").SystemValue = fcNo + item.FCBlindNo;
swPart.Parameter("D3@Sketch6").SystemValue = (item.FCSideLeft + 250m) / 1000m;
}
//----------UV灯----------
if (item.UVType == "LONG")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "CEILING UVRACK SPECIAL 4S-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "CEILING UVRACK SPECIAL 4L-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "CEILING UVRACK SPECIAL 4S-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "CEILING UVRACK SPECIAL 4L-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
//----------油网侧板----------
switch (item.FCSide)
{
case "LEFT":
//重命名装配体内部
compReName = "FNCE0108[BP-" + tree.Module + ".1]{" + (int)(item.FCSideLeft - fcNo * 1m - 4m) + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-2") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-2" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-2");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft - fcNo * 1m - 4m) / 1000m;
}
//重命名装配体内部
compReName = "FNCE0136[BP-" + tree.Module + ".2]{" + (int)(item.FCSideLeft - fcNo * 1m - 4m) + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0136[BP-]{}-3") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-3" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-3");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft - fcNo * 1m - 4m) / 1000m;
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0162[BP-]{}-4"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
case "RIGHT":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0136[BP-]{}-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
//重命名装配体内部
compReName = "FNCE0109[BP-" + tree.Module + ".1]{" + (int)(item.FCSideRight - fcNo * 1m - 4m) + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-3") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-3" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-3");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight - fcNo * 1m - 4m) / 1000m;
}
//重命名装配体内部
compReName = "FNCE0162[BP-" + tree.Module + ".2]{" + (int)(item.FCSideRight - fcNo * 1m - 4m) + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0162[BP-]{}-4") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-4" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-4");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight - fcNo * 1m - 4m) / 1000m;
}
break;
case "BOTH":
//重命名装配体内部
compReName = "FNCE0108[BP-" + tree.Module + ".1]{" + (int)(item.FCSideLeft - fcNo * 1m - 2m) + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-2") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-2" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-2");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft - fcNo * 1m - 2m) / 1000m;
}
//重命名装配体内部
compReName = "FNCE0136[BP-" + tree.Module + ".2]{" + (int)(item.FCSideLeft - fcNo * 1m - 2m) + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0136[BP-]{}-3") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-3" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-3");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft - fcNo * 1m - 2m) / 1000m;
}
//重命名装配体内部
compReName = "FNCE0109[BP-" + tree.Module + ".3]{" + (int)(item.FCSideRight - fcNo * 1m - 2m) + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-3") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-3" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-3");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight - fcNo * 1m - 2m) / 1000m;
}
//重命名装配体内部
compReName = "FNCE0162[BP-" + tree.Module + ".4]{" + (int)(item.FCSideRight - fcNo * 1m - 2m) + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0162[BP-]{}-4") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-4" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-4");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight - fcNo * 1m - 2m) / 1000m;
}
break;
default:
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0136[BP-]{}-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0162[BP-]{}-4"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
}
//----------日本项目需要压缩零件----------
if (item.Japan == "YES")
{
//吊装垫片
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-10"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern22");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//排风脖颈
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXSPIGOT-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
//排风腔
//重命名装配体内部
compReName = "FNCE0141[UCJDB800-" + tree.Module + "]{" + (int)item.Length + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0141-1") + "@" + assyName,
"COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false,
0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Linear austragen1").SystemValue = item.Length / 1000m;
swFeat = swComp.FeatureByName("EX");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("Cut-Extrude4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA-TAB");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
if (item.MARVEL == "YES")
{
swFeat = swComp.FeatureByName("MA-NTC");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("MA-NTC");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
}
else
{
//吊装垫片
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-10"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern2");
swFeat.SetSuppression2(2, 2, configNames); //参数1：1解压，0压缩
//排风脖颈
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXSPIGOT-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0019-1"));
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@基体-法兰1").SystemValue = (item.ExLength + 50m) / 1000m;
swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m;
swFeat = swComp.FeatureByName("ANSUL");
if (item.ANSUL == "YES")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0020-1"));
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@基体-法兰1").SystemValue = (item.ExLength + 50m) / 1000m;
swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0047-1"));
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@基体-法兰1").SystemValue = item.ExWidth / 1000m;
swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m;
swFeat = swComp.FeatureByName("ANDTEC");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0048-2"));
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@基体-法兰1").SystemValue = item.ExWidth / 1000m;
swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m;
swFeat = swComp.FeatureByName("ANDTEC");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//排风腔
//重命名装配体内部
compReName = "FNCE0141[UCJDB800-" + tree.Module + "]{" + (int)item.Length + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0141-1") + "@" + assyName,
"COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false,
0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Linear austragen1").SystemValue = item.Length / 1000m;
swFeat = swComp.FeatureByName("EX");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("Cut-Extrude4");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA-TAB");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch3").SystemValue = item.ExRightDis / 1000m;
swPart.Parameter("D1@Sketch3").SystemValue = item.ExLength / 1000m;
swPart.Parameter("D2@Sketch3").SystemValue = item.ExWidth / 1000m;
if (item.ANSUL == "YES")
{
//侧喷
if (item.ANSide == "LEFT")
{
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else if (item.ANSide == "RIGHT")
{
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//探测器
swFeat = swComp.FeatureByName("ANDTEC1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
if (item.ANDetectorNo > 0)
{
swFeat = swComp.FeatureByName("ANDTEC1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch9").SystemValue = item.ANDetectorDis1 / 1000m;
if (item.ANDetectorEnd == "RIGHT" ||
(item.ANDetectorEnd == "LEFT" && item.ANDetectorNo == 1))
{
swPart.Parameter("D1@Sketch9").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D1@Sketch9").SystemValue = 175m / 1000m;
}
}
if (item.ANDetectorNo > 1)
{
swFeat = swComp.FeatureByName("ANDTEC2");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch15").SystemValue = item.ANDetectorDis2 / 1000m;
if (item.ANDetectorEnd == "LEFT" && item.ANDetectorNo == 2)
{
swPart.Parameter("D2@Sketch15").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D2@Sketch15").SystemValue = 175m / 1000m;
}
}
if (item.ANDetectorNo > 2)
{
swFeat = swComp.FeatureByName("ANDTEC3");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch16").SystemValue = item.ANDetectorDis3 / 1000m;
if (item.ANDetectorEnd == "LEFT" && item.ANDetectorNo == 3)
{
swPart.Parameter("D2@Sketch16").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D2@Sketch16").SystemValue = 175m / 1000m;
}
}
if (item.ANDetectorNo > 3)
{
swFeat = swComp.FeatureByName("ANDTEC4");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch17").SystemValue = item.ANDetectorDis4 / 1000m;
if (item.ANDetectorEnd == "LEFT" && item.ANDetectorNo == 4)
{
swPart.Parameter("D2@Sketch17").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D2@Sketch17").SystemValue = 175m / 1000m;
}
}
if (item.ANDetectorNo > 4)
{
swFeat = swComp.FeatureByName("ANDTEC5");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch18").SystemValue = item.ANDetectorDis5 / 1000m;
if (item.ANDetectorEnd == "LEFT" && item.ANDetectorNo == 5)
{
swPart.Parameter("D2@Sketch18").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D2@Sketch18").SystemValue = 175m / 1000m;
}
}
}
else
{
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
if (item.MARVEL == "YES")
{
swFeat = swComp.FeatureByName("MA-NTC");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("MA-NTC");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
if (item.LightCable == "LEFT")
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.LightCable == "RIGHT")
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//UV灯
if (item.UVType == "LONG")
{
swFeat = swComp.FeatureByName("UV L");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D5@Sketch4").SystemValue = (item.ExRightDis - 800m) / 1000m;
swPart.Parameter("D8@Sketch4").SystemValue = (item.ExRightDis - 600m) / 1000m;
swFeat = swComp.FeatureByName("UV S");
swFeat.SetSuppression2(0, 2, configNames);
}
else
{
swFeat = swComp.FeatureByName("UV S");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch11").SystemValue = (item.ExRightDis - 446.5m) / 1000m;
swPart.Parameter("D8@Sketch11").SystemValue = (item.ExRightDis - 300m) / 1000m;
swFeat = swComp.FeatureByName("UV L");
swFeat.SetSuppression2(0, 2, configNames);
}
}
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0056-1"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D1@Skizze1").SystemValue = item.Length / 1000m;
//----------SSP灯板支撑条----------
if (item.SSPType == "DOME")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0036-4"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0036-5"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0035-6"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0035-5"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Sketch1").SystemValue = item.Length / 1000m;
if (item.Gutter == "YES")
{
swModel.Parameter("D1@Distance27").SystemValue = item.GutterWidth / 1000m;
swModel.Parameter("D1@Distance36").SystemValue = item.GutterWidth / 1000m;
}
else
{
swModel.Parameter("D1@Distance27").SystemValue = 0.5m / 1000m;
swModel.Parameter("D1@Distance36").SystemValue = 0.5m / 1000m;
}
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0036-4"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0036-5"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Sketch1").SystemValue = item.Length / 1000m;
if (item.Gutter == "YES")
{
swModel.Parameter("D1@Distance28").SystemValue = item.GutterWidth / 1000m;
swModel.Parameter("D1@Distance37").SystemValue = item.GutterWidth / 1000m;
}
else
{
swModel.Parameter("D1@Distance28").SystemValue = 0.5m / 1000m;
swModel.Parameter("D1@Distance37").SystemValue = 0.5m / 1000m;
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0035-6"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0035-5"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
public void generateRandomObject() //this function makes the "generate Random Object" button in the GUI work
{
string[] arguments = new string[variables.numVariables + constraints.numConstraints + 1];
arguments[0] = variables.numVariables.ToString() + "," + constraints.numConstraints.ToString();
for (int i = 0; i < variables.numVariables; i++)
{
arguments[i + 1] = variables.variablesName[i] + "," + variables.variablesMin[i] + "," + variables.variablesMax[i] + "," + variables.variablesType[i].ToString();
}
for (int i = variables.numVariables; i < variables.numVariables + constraints.numConstraints; i++)
{
arguments[i + 1] = constraints.constraintsEquation[i - variables.numVariables];
}
writeArgument(arguments);
string[] pythonResult = runPython("randomSample.py");
if (pythonResult == null)
{
return;
}
else if (pythonResult[1] == "false") //If couldn't create object
{
sendMessageToUser("Failed to generate random object");
return;
}
ModelDoc2 swModelDoc = swApp.ActiveDoc;
EquationMgr swEqnMgr = swModelDoc.GetEquationMgr();
string[] csStdout = pythonResult[0].Split(',');
for (int i = 0; i < swEqnMgr.GetCount(); i++)
{
if (swEqnMgr.GlobalVariable[i])
{
string newEquation;
// Get the variable name from the swEqn
string[] temp = swEqnMgr.Equation[i].Split(new string[] { "=" }, StringSplitOptions.None);
string name = temp[0];
// Get the variable unit from the swEqn
Regex re = new Regex(@"([._0-9]+)([a-zA-Z]+)");
Match result = re.Match(temp[1]);
string unit = result.Groups[2].Value;
// Get the index of swEqn variable at variables.
temp = temp[0].Split('"');
int index = variables.indexVariable(temp[1]);
//string[] randomVariables;
if (index >= 0)
{
// No constraints
//string random = randomNumber(variables.variablesMax[index], variables.variablesMin[index], variables.variablesType[index]);
//newEquation = name + "= " + random + unit; //
// HAVE TO COMPARE WITH CONSTRAINTS!!!!!!
newEquation = name + "= " + float.Parse(csStdout[index]).ToString() + unit;
swEqnMgr.Equation[i] = newEquation;
}
}
}
swModelDoc.ForceRebuild3(true);
}
