internal override void Elapse(ElapseData data, ref bool blocking)
{
int BrakeNotch = 0;
if (this.Train.Doors != DoorStates.None & this.AutomaticallyDeactivates)
{
this.State = Ato.States.Disabled;
}
if (this.State == Ato.States.Disabled)
{
this.Notch = 0;
}
else if (this.Train.Atc == null || !(this.Train.Atc.State == Atc.States.Normal | this.Train.Atc.State == Atc.States.ServiceHalf | this.Train.Atc.State == Atc.States.ServiceFull | this.Train.Atc.State == Atc.States.Emergency))
{
this.Notch = 0;
BrakeNotch = Train.Specs.BrakeNotches + 1;
}
else if (!(this.Train.Atc.State == Atc.States.Normal & data.Handles.Reverser == 1 & this.Train.TractionManager.CurrentInterventionBrakeNotch == 0))
{
this.Notch = 0;
//Set maximum power notch to zero via the Traction Manager
Train.TractionManager.SetMaxPowerNotch(0, true);
}
else
{
double metersPerSecond = this.Train.State.Speed.MetersPerSecond;
double currentSpeed = this.Train.Atc.Pattern.CurrentSpeed;
if (this.Train.Tasc != null && this.Train.Tasc.State == Tasc.States.Pattern && !this.Train.Tasc.Override && 6.94444444444444 < currentSpeed)
{
currentSpeed = 6.94444444444444;
}
double num = currentSpeed - 4.16666666666667;
double num1 = currentSpeed - 1.38888888888889;
if (metersPerSecond <= num)
{
this.State = Ato.States.Power;
}
else if (metersPerSecond >= num1)
{
this.State = Ato.States.Idle;
}
if (this.State != Ato.States.Power)
{
this.Notch = 0;
//Set maximum power notch to zero via the Traction Manager
Train.TractionManager.SetMaxPowerNotch(0, true);
}
else
{
int powerNotches = (int)Math.Ceiling((num1 - metersPerSecond) / 1.38888888888889 * (double)this.Train.Specs.PowerNotches);
if (powerNotches < 1)
{
powerNotches = 1;
}
else if (powerNotches > this.Train.Specs.PowerNotches)
{
powerNotches = this.Train.Specs.PowerNotches;
}
if (this.Notch >= powerNotches)
{
this.Notch = powerNotches;
}
else if (this.Countdown <= 0)
{
Ato notch = this;
notch.Notch = notch.Notch + 1;
this.Countdown = this.PowerApplicationTime / (double)this.Train.Specs.PowerNotches;
}
//Pass the calculated maximum power notch to the traction manager
Train.TractionManager.SetMaxPowerNotch(this.Notch, true);
}
}
if (this.Countdown > 0)
{
Ato countdown = this;
countdown.Countdown = countdown.Countdown - data.ElapsedTime.Seconds;
}
Train.TractionManager.SetBrakeNotch(BrakeNotch);
if (this.State != Ato.States.Disabled)
{
this.Train.Panel[91] = 1;
if (this.Train.Atc == null || this.Train.Atc.State != Atc.States.Normal & this.Train.Atc.State != Atc.States.ServiceHalf | this.Train.Atc.State == Atc.States.ServiceFull & this.Train.Atc.State != Atc.States.Emergency)
{
this.Train.Panel[92] = 1;
}
}
}
// --- functions ---
/// <summary>Sets up the devices from the specified configuration file.</summary>
/// <param name="file">The configuration file.</param>
internal void LoadConfigurationFile(string file)
{
string[] lines = File.ReadAllLines(file, Encoding.UTF8);
string section = string.Empty;
for (int i = 0; i < lines.Length; i++)
{
string line = lines[i];
int semicolon = line.IndexOf(';');
if (semicolon >= 0)
{
line = line.Substring(0, semicolon).Trim();
}
else
{
line = line.Trim();
}
if (line.Length != 0)
{
if (line[0] == '[' & line[line.Length - 1] == ']')
{
section = line.Substring(1, line.Length - 2).ToLowerInvariant();
switch (section)
{
case "ats-sx":
this.AtsSx = new AtsSx(this);
break;
case "ats-ps":
this.AtsPs = new AtsPs(this);
break;
case "ats-p":
this.AtsP = new AtsP(this);
break;
case "atc":
this.Atc = new Atc(this);
break;
case "eb":
this.Eb = new Eb(this);
break;
case "tasc":
this.Tasc = new Tasc(this);
break;
case "ato":
this.Ato = new Ato(this);
break;
default:
throw new InvalidDataException("The section " + line[0] + " is not supported.");
}
}
else
{
int equals = line.IndexOf('=');
if (equals >= 0)
{
string key = line.Substring(0, equals).Trim().ToLowerInvariant();
string value = line.Substring(equals + 1).Trim();
switch (section)
{
case "ats-sx":
switch (key)
{
case "durationofalarm":
this.AtsSx.DurationOfAlarm = double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture);
break;
case "durationofinitialization":
this.AtsSx.DurationOfInitialization = double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture);
break;
case "durationofspeedcheck":
this.AtsSx.DurationOfSpeedCheck = double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture);
break;
default:
throw new InvalidDataException("The parameter " + key + " is not supported.");
}
break;
case "ats-ps":
switch (key)
{
case "maximumspeed":
this.AtsPs.TrainPermanentPattern.SetPersistentLimit((1.0 / 3.6) * double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture));
break;
default:
throw new InvalidDataException("The parameter " + key + " is not supported.");
}
break;
case "ats-p":
switch (key)
{
case "durationofinitialization":
this.AtsP.DurationOfInitialization = double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture);
break;
case "durationofbrakerelease":
this.AtsP.DurationOfBrakeRelease = double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture);
break;
case "designdeceleration":
this.AtsP.DesignDeceleration = (1.0 / 3.6) * double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture);
break;
case "brakepatterndelay":
this.AtsP.BrakePatternDelay = double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture);
break;
case "brakepatternoffset":
case "signaloffset":
this.AtsP.BrakePatternOffset = double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture);
break;
case "brakepatterntolerance":
this.AtsP.BrakePatternTolerance = (1.0 / 3.6) * double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture);
break;
case "warningpatterndelay":
case "reactiondelay":
this.AtsP.WarningPatternDelay = double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture);
break;
case "warningpatternoffset":
this.AtsP.WarningPatternOffset = double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture);
break;
case "warningpatterntolerance":
this.AtsP.WarningPatternTolerance = (1.0 / 3.6) * double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture);
break;
case "patternspeeddifference":
this.AtsP.WarningPatternTolerance = (-1.0 / 3.6) * double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture);
break;
case "releasespeed":
this.AtsP.ReleaseSpeed = (1.0 / 3.6) * double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture);
break;
case "maximumspeed":
this.AtsP.TrainPermanentPattern.SetPersistentLimit((1.0 / 3.6) * double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture));
break;
default:
throw new InvalidDataException("The parameter " + key + " is not supported.");
}
break;
case "atc":
switch (key)
{
case "automaticswitch":
this.Atc.AutomaticSwitch = value.Equals("true", StringComparison.OrdinalIgnoreCase);
break;
case "emergencyoperation":
if (value.Equals("false", StringComparison.OrdinalIgnoreCase))
{
this.Atc.EmergencyOperationSignal = null;
}
else
{
double limit = (1.0 / 3.6) * double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture);
if (limit <= 0.0)
{
this.Atc.EmergencyOperationSignal = null;
}
else
{
this.Atc.EmergencyOperationSignal = Atc.Signal.CreateEmergencyOperationSignal(limit);
}
}
break;
default:
int aspect;
if (int.TryParse(key, NumberStyles.Integer, CultureInfo.InvariantCulture, out aspect))
{
if (aspect >= 10)
{
Atc.Signal signal = ParseAtcCode(aspect, value);
if (signal != null)
{
this.Atc.Signals.Add(signal);
break;
}
else
{
throw new InvalidDataException("The ATC code " + value + " is not supported.");
}
}
}
throw new InvalidDataException("The parameter " + key + " is not supported.");
}
break;
case "eb":
switch (key)
{
case "timeuntilbell":
this.Eb.TimeUntilBell = double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture);
break;
case "timeuntilbrake":
this.Eb.TimeUntilBrake = double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture);
break;
case "speedthreshold":
this.Eb.SpeedThreshold = double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture);
break;
default:
throw new InvalidDataException("The parameter " + key + " is not supported.");
}
break;
case "tasc":
switch (key)
{
case "designdeceleration":
this.Tasc.TascBrakeDeceleration = (1.0 / 3.6) * double.Parse(value, NumberStyles.Float, CultureInfo.InvariantCulture);
break;
default:
throw new InvalidDataException("The parameter " + key + " is not supported.");
}
break;
}
}
}
}
}
// --- devices ---
List <Device> devices = new List <Device>();
if (this.Ato != null)
{
devices.Add(this.Ato);
}
if (this.Tasc != null)
{
devices.Add(this.Tasc);
}
if (this.Eb != null)
{
devices.Add(this.Eb);
}
if (this.Atc != null)
{
devices.Add(this.Atc);
}
if (this.AtsP != null)
{
devices.Add(this.AtsP);
}
if (this.AtsPs != null)
{
devices.Add(this.AtsPs);
if (this.AtsSx == null)
{
this.AtsSx = new AtsSx(this);
}
}
if (this.AtsSx != null)
{
devices.Add(this.AtsSx);
}
this.Devices = devices.ToArray();
}
