protected override void OnPointUpdated(ControlPoint pt, Frame3f prevFrameS, bool isFirst)
{
Vector3f basePt = GetPointPosition(BasePointID, CoordSpace.SceneCoords).Origin;
Vector3f frontPt = GetPointPosition(FrontPointID, CoordSpace.SceneCoords).Origin;
Vector3f topPt = GetPointPosition(TopPointID, CoordSpace.SceneCoords).Origin;
lastTargetFrameS = TargetSO.GetLocalFrame(CoordSpace.SceneCoords);
Frame3f previewFrameS = lastTargetFrameS;
// position next to original object
previewFrameS = previewFrameS.Translated(1.1f * (float)meshBounds.Width * Vector3f.AxisX);
Vector3f upAxis = (topPt - basePt).Normalized;
// construct a frame perp to upAxis at midpoint, and project original and current fw points
Frame3f upFrame = new Frame3f((topPt + basePt) * 0.5f, upAxis);
Vector3f origFW = upFrame.ProjectToPlane(initialFrontPt, 2);
origFW = (origFW - upFrame.Origin).Normalized;
Vector3f curFW = upFrame.ProjectToPlane(frontPt, 2);
curFW = (curFW - upFrame.Origin).Normalized;
//float angle = MathUtil.PlaneAngleSignedD(origFW, curFW, upAxis);
start_forward_pt_S = upFrame.FromFrameP(origFW);
current_forward_pt_S = upFrame.FromFrameP(curFW);
// construct rotation that aligns up axis with y-up
Quaternionf upRotate = Quaternionf.FromTo(upAxis, Vector3f.AxisY);
previewFrameS.Rotate(upRotate);
// now rotate so that forward dir points along -Z
//Quaternionf fwRotate = Quaternionf.AxisAngleD(Vector3f.AxisY, angle);
//curFW = upRotate * curFW;
Quaternionf fwRotate = Quaternionf.FromToConstrained(curFW, -Vector3f.AxisZ, Vector3f.AxisY);
previewFrameS.Rotate(fwRotate);
previewSO.SetLocalFrame(previewFrameS, CoordSpace.SceneCoords);
lastPreviewFrameS = previewFrameS;
}
DMesh3 compute_partial_hole(Vector3d start, Vector3d end, double tol)
{
DMesh3 origMesh = MeshSource.GetDMeshUnsafe();
DMeshAABBTree3 origSpatial = MeshSource.GetSpatial() as DMeshAABBTree3;
DMesh3 cutMesh = new DMesh3(origMesh);
Polygon2d polygon = Polygon2d.MakeCircle(hole_size / 2, hole_subdivisions);
Vector3f axis = (Vector3f)(start - end).Normalized;
int start_tid = origSpatial.FindNearestTriangle(start);
Frame3f start_frame = origMesh.GetTriFrame(start_tid);
start_frame.Origin = (Vector3f)start;
start_frame.AlignAxis(2, axis);
int end_tid = origSpatial.FindNearestTriangle(end);
//Frame3f end_frame = origMesh.GetTriFrame(end_tid); end_frame.Origin = (Vector3f)end;
Frame3f end_frame = start_frame; end_frame.Origin = (Vector3f)end;
// [TODO] we don't need to Simplify here...is more robust?
MeshInsertProjectedPolygon start_insert = new MeshInsertProjectedPolygon(cutMesh, polygon, start_frame, start_tid);
bool start_ok = start_insert.Insert();
if (start_ok == false)
{
throw new Exception("CutPolygonHoleOp.compute_partial_hole: start or end insertion failed!");
}
EdgeLoop outLoop = start_insert.InsertedLoop;
MeshExtrudeLoop extrude = new MeshExtrudeLoop(cutMesh, outLoop);
extrude.PositionF = (v, n, vid) => {
cutMesh.GetVertex(vid);
return(end_frame.ProjectToPlane((Vector3f)v, 2));
};
extrude.Extrude();
SimpleHoleFiller filler = new SimpleHoleFiller(cutMesh, extrude.NewLoop);
filler.Fill();
return(cutMesh);
}
public void Close_Flat()
{
double minlen, maxlen, avglen;
MeshQueries.EdgeLengthStats(Mesh, out minlen, out maxlen, out avglen, 1000);
double target_edge_len = (TargetEdgeLen <= 0) ? avglen : TargetEdgeLen;
// massage around boundary loop
cleanup_boundary(Mesh, InitialBorderLoop, avglen, 3);
// find new border loop
// [TODO] this just assumes there is only one!!
MeshBoundaryLoops loops = new MeshBoundaryLoops(Mesh);
EdgeLoop fill_loop = loops.Loops[0];
int extrude_group = (ExtrudeGroup == -1) ? Mesh.AllocateTriangleGroup() : ExtrudeGroup;
int fill_group = (FillGroup == -1) ? Mesh.AllocateTriangleGroup() : FillGroup;
// decide on projection plane
//AxisAlignedBox3d loopbox = fill_loop.GetBounds();
//Vector3d topPt = loopbox.Center;
//if ( bIsUpper ) {
// topPt.y = loopbox.Max.y + 0.25 * dims.y;
//} else {
// topPt.y = loopbox.Min.y - 0.25 * dims.y;
//}
//Frame3f plane = new Frame3f((Vector3f)topPt);
// extrude loop to this plane
MeshExtrusion extrude = new MeshExtrusion(Mesh, fill_loop);
extrude.PositionF = (v, n, i) => {
return(FlatClosePlane.ProjectToPlane((Vector3F)v, 1));
};
extrude.Extrude(extrude_group);
MeshValidation.IsBoundaryLoop(Mesh, extrude.NewLoop);
Debug.Assert(Mesh.CheckValidity());
// smooth the extrude loop
MeshLoopSmooth loop_smooth = new MeshLoopSmooth(Mesh, extrude.NewLoop);
loop_smooth.ProjectF = (v, i) => {
return(FlatClosePlane.ProjectToPlane((Vector3F)v, 1));
};
loop_smooth.Alpha = 0.5f;
loop_smooth.Rounds = 100;
loop_smooth.Smooth();
Debug.Assert(Mesh.CheckValidity());
// fill result
SimpleHoleFiller filler = new SimpleHoleFiller(Mesh, extrude.NewLoop);
filler.Fill(fill_group);
Debug.Assert(Mesh.CheckValidity());
// make selection for remesh region
MeshFaceSelection remesh_roi = new MeshFaceSelection(Mesh);
remesh_roi.Select(extrude.NewTriangles);
remesh_roi.Select(filler.NewTriangles);
remesh_roi.ExpandToOneRingNeighbours();
remesh_roi.ExpandToOneRingNeighbours();
remesh_roi.LocalOptimize(true, true);
int[] new_roi = remesh_roi.ToArray();
// get rid of extrude group
FaceGroupUtil.SetGroupToGroup(Mesh, extrude_group, 0);
/* clean up via remesh
* - constrain loop we filled to itself
*/
RegionRemesher r = new RegionRemesher(Mesh, new_roi);
DCurve3 top_curve = mesh.MeshUtil.ExtractLoopV(Mesh, extrude.NewLoop.Vertices);
DCurveProjectionTarget curve_target = new DCurveProjectionTarget(top_curve);
int[] top_loop = (int[])extrude.NewLoop.Vertices.Clone();
r.Region.MapVerticesToSubmesh(top_loop);
MeshConstraintUtil.ConstrainVtxLoopTo(r.Constraints, r.Mesh, top_loop, curve_target);
DMeshAABBTree3 spatial = new DMeshAABBTree3(Mesh);
spatial.Build();
MeshProjectionTarget target = new MeshProjectionTarget(Mesh, spatial);
r.SetProjectionTarget(target);
bool bRemesh = true;
if (bRemesh)
{
r.Precompute();
r.EnableFlips = r.EnableSplits = r.EnableCollapses = true;
r.MinEdgeLength = target_edge_len;
r.MaxEdgeLength = 2 * target_edge_len;
r.EnableSmoothing = true;
r.SmoothSpeedT = 1.0f;
for (int k = 0; k < 40; ++k)
{
r.BasicRemeshPass();
}
r.SetProjectionTarget(null);
r.SmoothSpeedT = 0.25f;
for (int k = 0; k < 10; ++k)
{
r.BasicRemeshPass();
}
Debug.Assert(Mesh.CheckValidity());
r.BackPropropagate();
}
// smooth around the join region to clean up ugliness
smooth_region(Mesh, r.Region.BaseBorderV, 3);
}
protected void do_flatten(DMesh3 mesh)
{
double BAND_HEIGHT = flatten_band_height;
Vector3d down_axis = -Vector3d.AxisY;
double dot_thresh = 0.2;
AxisAlignedBox3d bounds = mesh.CachedBounds;
DMeshAABBTree3 spatial = new DMeshAABBTree3(mesh, true);
Ray3d ray = new Ray3d(bounds.Center - 2 * bounds.Height * Vector3d.AxisY, Vector3d.AxisY);
int hit_tid = spatial.FindNearestHitTriangle(ray);
Frame3f hitF;
MeshQueries.RayHitPointFrame(mesh, spatial, ray, out hitF);
Vector3d basePt = hitF.Origin;
Frame3f basePlane = new Frame3f(basePt, Vector3f.AxisY);
MeshConnectedComponents components = new MeshConnectedComponents(mesh)
{
FilterF = (tid) => {
if (mesh.GetTriangleGroup(tid) != LastExtrudeOuterGroupID)
{
return(false);
}
Vector3d n, c; double a;
mesh.GetTriInfo(tid, out n, out a, out c);
double h = Math.Abs(c.y - basePt.y);
if (h > BAND_HEIGHT)
{
return(false);
}
if (n.Dot(down_axis) < dot_thresh)
{
return(false);
}
return(true);
},
SeedFilterF = (tid) => {
return(tid == hit_tid);
}
};
components.FindConnectedT();
MeshFaceSelection all_faces = new MeshFaceSelection(mesh);
foreach (var comp in components)
{
MeshVertexSelection vertices = new MeshVertexSelection(mesh);
vertices.SelectTriangleVertices(comp.Indices);
foreach (int vid in vertices)
{
Vector3d v = mesh.GetVertex(vid);
v = basePlane.ProjectToPlane((Vector3f)v, 2);
mesh.SetVertex(vid, v);
}
all_faces.SelectVertexOneRings(vertices);
}
all_faces.ExpandToOneRingNeighbours(3, (tid) => {
return(mesh.GetTriangleGroup(tid) == LastExtrudeOuterGroupID);
});
RegionRemesher r = new RegionRemesher(mesh, all_faces);
r.SetProjectionTarget(MeshProjectionTarget.Auto(mesh));
r.SetTargetEdgeLength(2.0f);
r.SmoothSpeedT = 1.0f;
for (int k = 0; k < 10; ++k)
{
r.BasicRemeshPass();
}
r.SetProjectionTarget(null);
r.SmoothSpeedT = 1.0f;
for (int k = 0; k < 10; ++k)
{
r.BasicRemeshPass();
}
r.BackPropropagate();
}
public void UpdateDraw_Spatial(Ray3f ray, Frame3f handFrame, int nStep)
{
// scene xform may have changed during steps (eg view rotation), so we
// need to reconstruct our local frame
Frame3f primCurW = scene.ToWorldFrame(primStartS);
// try snap points
SnapResult snap = Snaps.FindHitSnapPoint(ray);
bool bHaveSnap = (snap != null);
Frame3f snapF = (bHaveSnap) ? scene.ToWorldFrame(snap.FrameS) : Frame3f.Identity;
// step 1: find radius in plane
if (nStep == 0)
{
if (bHaveSnap)
{
plane_hit_local = primCurW.ToFrameP(
primCurW.ProjectToPlane(snapF.Origin, 1));
}
else
{
Vector3f forwardDir = ray.Direction;
Vector3f plane_hit = VRUtil.SafeRayPlaneIntersection(ray, forwardDir, primCurW.Origin, primCurW.Y);
plane_hit_local = primCurW.ToFrameP(plane_hit);
}
}
float fX = MathUtil.SignedClamp(plane_hit_local[0], MinDimension, MaxDimension);
float fY = MinDimension;
float fZ = MathUtil.SignedClamp(plane_hit_local[2], MinDimension, MaxDimension);
float fR_plane = MathUtil.Clamp(plane_hit_local.Length, MinDimension / 2, MaxDimension / 2);
// step 2: find height from plane
if (nStep == 1)
{
Vector3f plane_hit = primCurW.FromFrameP(plane_hit_local);
Line3d l = new Line3d(plane_hit, primCurW.Y);
if (bHaveSnap)
{
fY = (float)l.Project(snapF.Origin);
}
else
{
Vector3f handTip = handFrame.Origin + SceneGraphConfig.HandTipOffset * handFrame.Z;
float fHandDist = (float)l.DistanceSquared(handTip);
if (fHandDist < fR_plane * 1.5f)
{
fY = (float)l.Project(handTip);
}
else
{
fY = (float)DistLine3Ray3.MinDistanceLineParam(ray, l);
}
}
}
// figure out possible dimensions, clamp to ranges
fY = MathUtil.SignedClamp(fY, MinDimension, MaxDimension);
// update frame
primitive.Frame = primCurW;
// update dimensions
bool bIsCorner = (primitive.Center == CenterModes.Corner);
float fScale = 1.0f; // object is not in scene coordinates!
if (primitive.Type == MeshPrimitivePreview.PrimType.Cylinder)
{
primitive.Width = (bIsCorner) ? fR_plane * fScale : 2 * fR_plane * fScale;
primitive.Depth = primitive.Width;
//primitive.Depth = Mathf.Sign(fZ) * primitive.Width;
//primitive.Width = Mathf.Sign(fX) * primitive.Width;
primitive.Height = fY * fScale;
}
else if (primitive.Type == MeshPrimitivePreview.PrimType.Box)
{
primitive.Width = (bIsCorner) ? fX : 2 * fX * fScale;
primitive.Depth = (bIsCorner) ? fZ : 2 * fZ * fScale;
primitive.Height = fY * fScale;
}
else if (primitive.Type == MeshPrimitivePreview.PrimType.Sphere)
{
primitive.Width = (bIsCorner) ? fR_plane * fScale : 2 * fR_plane * fScale;
primitive.Depth = primitive.Height = primitive.Width;
//primitive.Depth = Mathf.Sign(fZ) * primitive.Width;
//primitive.Width = Mathf.Sign(fX) * primitive.Width;
//primitive.Height = Mathf.Sign(fY) * primitive.Width;
}
else
{
throw new NotImplementedException("SnapDrawPrimitivesTool.UpdateDraw_Ray - type not supported");
}
}
