private bool bindExplicitConversionToPointer()
{
// 27.4 Pointer conversions
//
// in an unsafe context, the set of available explicit conversions (13.2) is extended to
// include the following explicit pointer conversions:
//
// * From any pointer-type to any other pointer-type.
// * From sbyte, byte, short, ushort, int, uint, long, or ulong to any pointer-type.
if (_typeSrc.IsPointerType() || _typeSrc.fundType() <= FUNDTYPE.FT_LASTINTEGRAL && _typeSrc.isNumericType())
{
if (_needsExprDest)
{
_binder.bindSimpleCast(_exprSrc, _exprTypeDest, out _exprDest);
}
return(true);
}
return(false);
}
private bool bindImplicitConversionFromPointer()
{
// 27.4 Pointer conversions
//
// In an unsafe context, the set of available implicit conversions (13.1) is extended to include
// the following implicit pointer conversions:
//
// * From any pointer-type to the type void*.
if (_typeDest.IsPointerType() && _typeDest.AsPointerType().GetReferentType() == _binder.getVoidType())
{
if (_needsExprDest)
_binder.bindSimpleCast(_exprSrc, _exprTypeDest, out _exprDest);
return true;
}
return false;
}
// !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
// RUNTIME BINDER ONLY CHANGE
// !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
internal bool GetBestAccessibleType(CSemanticChecker semanticChecker, BindingContext bindingContext, CType typeSrc, out CType typeDst)
{
// This method implements the "best accessible type" algorithm for determining the type
// of untyped arguments in the runtime binder. It is also used in method type inference
// to fix type arguments to types that are accessible.
// The new type is returned in an out parameter. The result will be true (and the out param
// non-null) only when the algorithm could find a suitable accessible type.
Debug.Assert(semanticChecker != null);
Debug.Assert(bindingContext != null);
Debug.Assert(typeSrc != null);
typeDst = null;
if (semanticChecker.CheckTypeAccess(typeSrc, bindingContext.ContextForMemberLookup()))
{
// If we already have an accessible type, then use it. This is the terminal point of the recursion.
typeDst = typeSrc;
return true;
}
// These guys have no accessibility concerns.
Debug.Assert(!typeSrc.IsVoidType() && !typeSrc.IsErrorType() && !typeSrc.IsTypeParameterType());
if (typeSrc.IsParameterModifierType() || typeSrc.IsPointerType())
{
// We cannot vary these.
return false;
}
CType intermediateType;
if ((typeSrc.isInterfaceType() || typeSrc.isDelegateType()) && TryVarianceAdjustmentToGetAccessibleType(semanticChecker, bindingContext, typeSrc.AsAggregateType(), out intermediateType))
{
// If we have an interface or delegate type, then it can potentially be varied by its type arguments
// to produce an accessible type, and if that's the case, then return that.
// Example: IEnumerable<PrivateConcreteFoo> --> IEnumerable<PublicAbstractFoo>
typeDst = intermediateType;
Debug.Assert(semanticChecker.CheckTypeAccess(typeDst, bindingContext.ContextForMemberLookup()));
return true;
}
if (typeSrc.IsArrayType() && TryArrayVarianceAdjustmentToGetAccessibleType(semanticChecker, bindingContext, typeSrc.AsArrayType(), out intermediateType))
{
// Similarly to the interface and delegate case, arrays are covariant in their element type and
// so we can potentially produce an array type that is accessible.
// Example: PrivateConcreteFoo[] --> PublicAbstractFoo[]
typeDst = intermediateType;
Debug.Assert(semanticChecker.CheckTypeAccess(typeDst, bindingContext.ContextForMemberLookup()));
return true;
}
if (typeSrc.IsNullableType())
{
// We have an inaccessible nullable type, which means that the best we can do is System.ValueType.
typeDst = this.GetOptPredefAgg(PredefinedType.PT_VALUE).getThisType();
Debug.Assert(semanticChecker.CheckTypeAccess(typeDst, bindingContext.ContextForMemberLookup()));
return true;
}
if (typeSrc.IsArrayType())
{
// We have an inaccessible array type for which we could not earlier find a better array type
// with a covariant conversion, so the best we can do is System.Array.
typeDst = this.GetReqPredefAgg(PredefinedType.PT_ARRAY).getThisType();
Debug.Assert(semanticChecker.CheckTypeAccess(typeDst, bindingContext.ContextForMemberLookup()));
return true;
}
Debug.Assert(typeSrc.IsAggregateType());
if (typeSrc.IsAggregateType())
{
// We have an AggregateType, so recurse on its base class.
AggregateType aggType = typeSrc.AsAggregateType();
AggregateType baseType = aggType.GetBaseClass();
if (baseType == null)
{
// This happens with interfaces, for instance. But in that case, the
// conversion to object does exist, is an implicit reference conversion,
// and so we will use it.
baseType = this.GetReqPredefAgg(PredefinedType.PT_OBJECT).getThisType();
}
return GetBestAccessibleType(semanticChecker, bindingContext, baseType, out typeDst);
}
return false;
}
private static bool CheckSingleConstraint(CSemanticChecker checker, ErrorHandling errHandling, Symbol symErr, TypeParameterType var, CType arg, TypeArray typeArgsCls, TypeArray typeArgsMeth, CheckConstraintsFlags flags)
{
bool fReportErrors = 0 == (flags & CheckConstraintsFlags.NoErrors);
if (arg.IsOpenTypePlaceholderType())
{
return true;
}
if (arg.IsErrorType())
{
// Error should have been reported previously.
return false;
}
if (checker.CheckBogus(arg))
{
if (fReportErrors)
{
errHandling.ErrorRef(ErrorCode.ERR_BogusType, arg);
}
return false;
}
if (arg.IsPointerType() || arg.isSpecialByRefType())
{
if (fReportErrors)
{
errHandling.Error(ErrorCode.ERR_BadTypeArgument, arg);
}
return false;
}
if (arg.isStaticClass())
{
if (fReportErrors)
{
checker.ReportStaticClassError(null, arg, ErrorCode.ERR_GenericArgIsStaticClass);
}
return false;
}
bool fError = false;
if (var.HasRefConstraint() && !arg.IsRefType())
{
if (fReportErrors)
{
errHandling.ErrorRef(ErrorCode.ERR_RefConstraintNotSatisfied, symErr, new ErrArgNoRef(var), arg);
}
fError = true;
}
TypeArray bnds = checker.GetSymbolLoader().GetTypeManager().SubstTypeArray(var.GetBounds(), typeArgsCls, typeArgsMeth);
int itypeMin = 0;
if (var.HasValConstraint())
{
// If we have a type variable that is constrained to a value type, then we
// want to check if its a nullable type, so that we can report the
// constraint error below. In order to do this however, we need to check
// that either the type arg is not a value type, or it is a nullable type.
//
// To check whether or not its a nullable type, we need to get the resolved
// bound from the type argument and check against that.
bool bIsValueType = arg.IsValType();
bool bIsNullable = arg.IsNullableType();
if (bIsValueType && arg.IsTypeParameterType())
{
TypeArray pArgBnds = arg.AsTypeParameterType().GetBounds();
if (pArgBnds.size > 0)
{
bIsNullable = pArgBnds.Item(0).IsNullableType();
}
}
if (!bIsValueType || bIsNullable)
{
if (fReportErrors)
{
errHandling.ErrorRef(ErrorCode.ERR_ValConstraintNotSatisfied, symErr, new ErrArgNoRef(var), arg);
}
fError = true;
}
// Since FValCon() is set it is redundant to check System.ValueType as well.
if (bnds.size != 0 && bnds.Item(0).isPredefType(PredefinedType.PT_VALUE))
{
itypeMin = 1;
}
}
for (int j = itypeMin; j < bnds.size; j++)
{
CType typeBnd = bnds.Item(j);
if (!SatisfiesBound(checker, arg, typeBnd))
{
if (fReportErrors)
{
// The bound isn't satisfied because of a constaint type. Explain to the user why not.
// There are 4 main cases, based on the type of the supplied type argument:
// - reference type, or type parameter known to be a reference type
// - nullable type, from which there is a boxing conversion to the constraint type(see below for details)
// - type varaiable
// - value type
// These cases are broken out because: a) The sets of conversions which can be used
// for constraint satisfaction is different based on the type argument supplied,
// and b) Nullable is one funky type, and user's can use all the help they can get
// when using it.
ErrorCode error;
if (arg.IsRefType())
{
// A reference type can only satisfy bounds to types
// to which they have an implicit reference conversion
error = ErrorCode.ERR_GenericConstraintNotSatisfiedRefType;
}
else if (arg.IsNullableType() && checker.GetSymbolLoader().HasBaseConversion(arg.AsNullableType().GetUnderlyingType(), typeBnd)) // This is inlining FBoxingConv
{
// nullable types do not satisfy bounds to every type that they are boxable to
// They only satisfy bounds of object and ValueType
if (typeBnd.isPredefType(PredefinedType.PT_ENUM) || arg.AsNullableType().GetUnderlyingType() == typeBnd)
{
// Nullable types don't satisfy bounds of EnumType, or the underlying type of the enum
// even though the conversion from Nullable to these types is a boxing conversion
// This is a rare case, because these bounds can never be directly stated ...
// These bounds can only occur when one type paramter is constrained to a second type parameter
// and the second type parameter is instantiated with Enum or the underlying type of the first type
// parameter
error = ErrorCode.ERR_GenericConstraintNotSatisfiedNullableEnum;
}
else
{
// Nullable types don't satisfy the bounds of any interface type
// even when there is a boxing conversion from the Nullable type to
// the interface type. This will be a relatively common scenario
// so we cal it out separately from the previous case.
Debug.Assert(typeBnd.isInterfaceType());
error = ErrorCode.ERR_GenericConstraintNotSatisfiedNullableInterface;
}
}
else if (arg.IsTypeParameterType())
{
// Type variables can satisfy bounds through boxing and type variable conversions
Debug.Assert(!arg.IsRefType());
error = ErrorCode.ERR_GenericConstraintNotSatisfiedTyVar;
}
else
{
// Value types can only satisfy bounds through boxing conversions.
// Note that the exceptional case of Nullable types and boxing is handled above.
error = ErrorCode.ERR_GenericConstraintNotSatisfiedValType;
}
errHandling.Error(error, new ErrArgRef(symErr), new ErrArg(typeBnd, ErrArgFlags.Unique), var, new ErrArgRef(arg, ErrArgFlags.Unique));
}
fError = true;
}
}
// Check the newable constraint.
if (!var.HasNewConstraint() || arg.IsValType())
{
return !fError;
}
if (arg.isClassType())
{
AggregateSymbol agg = arg.AsAggregateType().getAggregate();
// Due to late binding nature of IDE created symbols, the AggregateSymbol might not
// have all the information necessary yet, if it is not fully bound.
// by calling LookupAggMember, it will ensure that we will update all the
// information necessary at least for the given method.
checker.GetSymbolLoader().LookupAggMember(checker.GetNameManager().GetPredefName(PredefinedName.PN_CTOR), agg, symbmask_t.MASK_ALL);
if (agg.HasPubNoArgCtor() && !agg.IsAbstract())
{
return !fError;
}
}
else if (arg.IsTypeParameterType() && arg.AsTypeParameterType().HasNewConstraint())
{
return !fError;
}
if (fReportErrors)
{
errHandling.ErrorRef(ErrorCode.ERR_NewConstraintNotSatisfied, symErr, new ErrArgNoRef(var), arg);
}
return false;
}
private static bool CheckSingleConstraint(CSemanticChecker checker, ErrorHandling errHandling, Symbol symErr, TypeParameterType var, CType arg, TypeArray typeArgsCls, TypeArray typeArgsMeth, CheckConstraintsFlags flags)
{
bool fReportErrors = 0 == (flags & CheckConstraintsFlags.NoErrors);
if (arg.IsOpenTypePlaceholderType())
{
return(true);
}
if (arg.IsErrorType())
{
// Error should have been reported previously.
return(false);
}
if (checker.CheckBogus(arg))
{
if (fReportErrors)
{
errHandling.ErrorRef(ErrorCode.ERR_BogusType, arg);
}
return(false);
}
if (arg.IsPointerType() || arg.isSpecialByRefType())
{
if (fReportErrors)
{
errHandling.Error(ErrorCode.ERR_BadTypeArgument, arg);
}
return(false);
}
if (arg.isStaticClass())
{
if (fReportErrors)
{
checker.ReportStaticClassError(null, arg, ErrorCode.ERR_GenericArgIsStaticClass);
}
return(false);
}
bool fError = false;
if (var.HasRefConstraint() && !arg.IsRefType())
{
if (fReportErrors)
{
errHandling.ErrorRef(ErrorCode.ERR_RefConstraintNotSatisfied, symErr, new ErrArgNoRef(var), arg);
}
fError = true;
}
TypeArray bnds = checker.GetSymbolLoader().GetTypeManager().SubstTypeArray(var.GetBounds(), typeArgsCls, typeArgsMeth);
int itypeMin = 0;
if (var.HasValConstraint())
{
// If we have a type variable that is constrained to a value type, then we
// want to check if its a nullable type, so that we can report the
// constraint error below. In order to do this however, we need to check
// that either the type arg is not a value type, or it is a nullable type.
//
// To check whether or not its a nullable type, we need to get the resolved
// bound from the type argument and check against that.
bool bIsValueType = arg.IsValType();
bool bIsNullable = arg.IsNullableType();
if (bIsValueType && arg.IsTypeParameterType())
{
TypeArray pArgBnds = arg.AsTypeParameterType().GetBounds();
if (pArgBnds.Count > 0)
{
bIsNullable = pArgBnds[0].IsNullableType();
}
}
if (!bIsValueType || bIsNullable)
{
if (fReportErrors)
{
errHandling.ErrorRef(ErrorCode.ERR_ValConstraintNotSatisfied, symErr, new ErrArgNoRef(var), arg);
}
fError = true;
}
// Since FValCon() is set it is redundant to check System.ValueType as well.
if (bnds.Count != 0 && bnds[0].isPredefType(PredefinedType.PT_VALUE))
{
itypeMin = 1;
}
}
for (int j = itypeMin; j < bnds.Count; j++)
{
CType typeBnd = bnds[j];
if (!SatisfiesBound(checker, arg, typeBnd))
{
if (fReportErrors)
{
// The bound isn't satisfied because of a constraint type. Explain to the user why not.
// There are 4 main cases, based on the type of the supplied type argument:
// - reference type, or type parameter known to be a reference type
// - nullable type, from which there is a boxing conversion to the constraint type(see below for details)
// - type variable
// - value type
// These cases are broken out because: a) The sets of conversions which can be used
// for constraint satisfaction is different based on the type argument supplied,
// and b) Nullable is one funky type, and user's can use all the help they can get
// when using it.
ErrorCode error;
if (arg.IsRefType())
{
// A reference type can only satisfy bounds to types
// to which they have an implicit reference conversion
error = ErrorCode.ERR_GenericConstraintNotSatisfiedRefType;
}
else if (arg.IsNullableType() && checker.GetSymbolLoader().HasBaseConversion(arg.AsNullableType().GetUnderlyingType(), typeBnd)) // This is inlining FBoxingConv
{
// nullable types do not satisfy bounds to every type that they are boxable to
// They only satisfy bounds of object and ValueType
if (typeBnd.isPredefType(PredefinedType.PT_ENUM) || arg.AsNullableType().GetUnderlyingType() == typeBnd)
{
// Nullable types don't satisfy bounds of EnumType, or the underlying type of the enum
// even though the conversion from Nullable to these types is a boxing conversion
// This is a rare case, because these bounds can never be directly stated ...
// These bounds can only occur when one type paramter is constrained to a second type parameter
// and the second type parameter is instantiated with Enum or the underlying type of the first type
// parameter
error = ErrorCode.ERR_GenericConstraintNotSatisfiedNullableEnum;
}
else
{
// Nullable types don't satisfy the bounds of any interface type
// even when there is a boxing conversion from the Nullable type to
// the interface type. This will be a relatively common scenario
// so we cal it out separately from the previous case.
Debug.Assert(typeBnd.isInterfaceType());
error = ErrorCode.ERR_GenericConstraintNotSatisfiedNullableInterface;
}
}
else if (arg.IsTypeParameterType())
{
// Type variables can satisfy bounds through boxing and type variable conversions
Debug.Assert(!arg.IsRefType());
error = ErrorCode.ERR_GenericConstraintNotSatisfiedTyVar;
}
else
{
// Value types can only satisfy bounds through boxing conversions.
// Note that the exceptional case of Nullable types and boxing is handled above.
error = ErrorCode.ERR_GenericConstraintNotSatisfiedValType;
}
errHandling.Error(error, new ErrArgRef(symErr), new ErrArg(typeBnd, ErrArgFlags.Unique), var, new ErrArgRef(arg, ErrArgFlags.Unique));
}
fError = true;
}
}
// Check the newable constraint.
if (!var.HasNewConstraint() || arg.IsValType())
{
return(!fError);
}
if (arg.isClassType())
{
AggregateSymbol agg = arg.AsAggregateType().getAggregate();
// Due to late binding nature of IDE created symbols, the AggregateSymbol might not
// have all the information necessary yet, if it is not fully bound.
// by calling LookupAggMember, it will ensure that we will update all the
// information necessary at least for the given method.
checker.GetSymbolLoader().LookupAggMember(checker.GetNameManager().GetPredefName(PredefinedName.PN_CTOR), agg, symbmask_t.MASK_ALL);
if (agg.HasPubNoArgCtor() && !agg.IsAbstract())
{
return(!fError);
}
}
else if (arg.IsTypeParameterType() && arg.AsTypeParameterType().HasNewConstraint())
{
return(!fError);
}
if (fReportErrors)
{
errHandling.ErrorRef(ErrorCode.ERR_NewConstraintNotSatisfied, symErr, new ErrArgNoRef(var), arg);
}
return(false);
}