public void SettingTheRetryPolicyUpdatesState()
{
var retryOptions = new RetryOptions
{
Delay = TimeSpan.FromSeconds(1),
MaximumDelay = TimeSpan.FromSeconds(2),
TryTimeout = TimeSpan.FromSeconds(3),
MaximumRetries = 4,
Mode = RetryMode.Fixed
};
var customRetry = Mock.Of <EventHubRetryPolicy>();
var consumerOptions = new EventHubConsumerOptions {
RetryOptions = retryOptions
};
var consumer = new EventHubConsumer(new ObservableTransportConsumerMock(), "dummy", "consumerGroup", "0", EventPosition.Latest, consumerOptions, new BasicRetryPolicy(retryOptions));
Assert.That(consumer.RetryPolicy, Is.InstanceOf <BasicRetryPolicy>(), "The retry policy should have been created from options");
consumer.RetryPolicy = customRetry;
Assert.That(consumer.RetryPolicy, Is.SameAs(customRetry), "The custom retry policy should have been set.");
var activeOptions = (EventHubConsumerOptions)
typeof(EventHubConsumer)
.GetProperty("Options", BindingFlags.Instance | BindingFlags.NonPublic)
.GetValue(consumer);
Assert.That(activeOptions.RetryOptions, Is.Null, "Setting a custom policy should clear the retry options.");
}
private static void InitEventConsumer()
{
var config = EventHubConfigSection.GetConfig();
_eventHubConsumer = new EventHubConsumer(config, "weather");
_eventHubConsumer.RegisterEventProcessor <SimpleEventProcessor>();
}
public void ConstructorSetsTheConsumerGroup()
{
var consumerGroup = "SomeGroup";
var transportConsumer = new ObservableTransportConsumerMock();
var consumer = new EventHubConsumer(transportConsumer, "dummy", consumerGroup, "0", EventPosition.Latest, new EventHubConsumerOptions(), Mock.Of <EventHubRetryPolicy>());
Assert.That(consumer.ConsumerGroup, Is.EqualTo(consumerGroup));
}
public void ConstructorSetsTheStartingPosition()
{
var expectedPosition = EventPosition.FromSequenceNumber(5641);
var transportConsumer = new ObservableTransportConsumerMock();
var consumer = new EventHubConsumer(transportConsumer, "dummy", EventHubConsumer.DefaultConsumerGroupName, "0", expectedPosition, new EventHubConsumerOptions(), Mock.Of <EventHubRetryPolicy>());
Assert.That(consumer.StartingPosition, Is.EqualTo(expectedPosition));
}
public void ConstructorSetsThePartition()
{
var partition = "aPartition";
var transportConsumer = new ObservableTransportConsumerMock();
var consumer = new EventHubConsumer(transportConsumer, "dummy", EventHubConsumer.DefaultConsumerGroupName, partition, EventPosition.FromSequenceNumber(1), new EventHubConsumerOptions(), Mock.Of <EventHubRetryPolicy>());
Assert.That(consumer.PartitionId, Is.EqualTo(partition));
}
public void ConstructorSetsTheRetryPolicy()
{
var retryPolicy = Mock.Of <EventHubRetryPolicy>();
var transportConsumer = new ObservableTransportConsumerMock();
var consumer = new EventHubConsumer(transportConsumer, "dummy", "consumerGroup", "0", EventPosition.Latest, new EventHubConsumerOptions(), retryPolicy);
Assert.That(consumer.RetryPolicy, Is.SameAs(retryPolicy));
}
public async Task CloseAsyncClosesTheTransportConsumer()
{
var transportConsumer = new ObservableTransportConsumerMock();
var consumer = new EventHubConsumer(transportConsumer, "dummy", EventHubConsumer.DefaultConsumerGroup, "0", EventPosition.Latest, new EventHubConsumerOptions());
await consumer.CloseAsync();
Assert.That(transportConsumer.WasCloseCalled, Is.True);
}
public void ReceiveAsyncValidatesTheMaximumCount(int maximumMessageCount)
{
var transportConsumer = new ObservableTransportConsumerMock();
var consumer = new EventHubConsumer(transportConsumer, "dummy", EventHubConsumer.DefaultConsumerGroup, "0", EventPosition.Latest, new EventHubConsumerOptions());
var cancellation = new CancellationTokenSource();
var expectedWaitTime = TimeSpan.FromDays(1);
Assert.That(async() => await consumer.ReceiveAsync(maximumMessageCount, expectedWaitTime, cancellation.Token), Throws.InstanceOf <ArgumentException>());
}
public void ReceiveAsyncValidatesTheMaximumWaitTime(int timeSpanDelta)
{
var transportConsumer = new ObservableTransportConsumerMock();
var consumer = new EventHubConsumer(transportConsumer, "dummy", EventHubConsumer.DefaultConsumerGroupName, "0", EventPosition.Latest, new EventHubConsumerOptions(), Mock.Of <EventHubRetryPolicy>());
var cancellation = new CancellationTokenSource();
var expectedWaitTime = TimeSpan.FromMilliseconds(timeSpanDelta);
Assert.That(async() => await consumer.ReceiveAsync(32, expectedWaitTime, cancellation.Token), Throws.InstanceOf <ArgumentException>());
}
public void CloseClosesTheTransportConsumer()
{
var transportConsumer = new ObservableTransportConsumerMock();
var consumer = new EventHubConsumer(transportConsumer, "dummy", EventHubConsumer.DefaultConsumerGroupName, "0", EventPosition.Latest, new EventHubConsumerOptions(), Mock.Of <EventHubRetryPolicy>());
consumer.Close();
Assert.That(transportConsumer.WasCloseCalled, Is.True);
}
public void CloseClosesTheTransportConsumer()
{
var transportConsumer = new ObservableTransportConsumerMock();
var consumer = new EventHubConsumer(transportConsumer, "dummy", "0", EventPosition.Latest, new EventHubConsumerOptions());
consumer.Close();
Assert.That(transportConsumer.WasCloseCalled, Is.True);
}
public void SettingTheRetryPolicyUpdatesTheTransportConsumer()
{
var customRetry = Mock.Of <EventHubRetryPolicy>();
var transportConsumer = new ObservableTransportConsumerMock();
var consumerOptions = new EventHubConsumerOptions();
var consumer = new EventHubConsumer(transportConsumer, "dummy", "consumerGroup", "0", EventPosition.Latest, consumerOptions, Mock.Of <EventHubRetryPolicy>());
consumer.RetryPolicy = customRetry;
Assert.That(transportConsumer.UpdateRetryPolicyCalledWith, Is.SameAs(customRetry), "The custom retry policy should have been set.");
}
public void ConstructorSetsTheConsumerGroup()
{
var options = new EventHubConsumerOptions
{
ConsumerGroup = "SomeGroup"
};
var transportConsumer = new ObservableTransportConsumerMock();
var consumer = new EventHubConsumer(transportConsumer, "dummy", "0", EventPosition.Latest, options);
Assert.That(consumer.ConsumerGroup, Is.EqualTo(options.ConsumerGroup));
}
public void ConstructorSetsThePriority(long?priority)
{
var options = new EventHubConsumerOptions
{
OwnerLevel = priority
};
var transportConsumer = new ObservableTransportConsumerMock();
var consumer = new EventHubConsumer(transportConsumer, "dummy", EventHubConsumer.DefaultConsumerGroupName, "0", EventPosition.FromOffset(65), options, Mock.Of <EventHubRetryPolicy>());
Assert.That(consumer.OwnerLevel, Is.EqualTo(priority));
}
private static async Task CreateSenderAndReceiver()
{
Console.Write("Creating the Sender and Receivers... ");
var partition = (await client.GetPartitionIdsAsync()).First();
var producerOptions = new EventHubProducerOptions
{
PartitionId = partition
};
sender = client.CreateProducer(producerOptions);
receiver = client.CreateConsumer(EventHubConsumer.DefaultConsumerGroupName, partition, EventPosition.Latest);
Console.WriteLine("\tdone");
}
public async Task ReceiveAsyncInvokesTheTransportConsumer()
{
var options = new EventHubConsumerOptions {
DefaultMaximumReceiveWaitTime = TimeSpan.FromMilliseconds(8)
};
var transportConsumer = new ObservableTransportConsumerMock();
var consumer = new EventHubConsumer(transportConsumer, "dummy", EventHubConsumer.DefaultConsumerGroupName, "0", EventPosition.Latest, options, Mock.Of <EventHubRetryPolicy>());
var cancellation = new CancellationTokenSource();
var expectedMessageCount = 45;
await consumer.ReceiveAsync(expectedMessageCount, null, cancellation.Token);
(var actualMessageCount, var actualWaitTime) = transportConsumer.ReceiveCalledWith;
Assert.That(actualMessageCount, Is.EqualTo(expectedMessageCount), "The message counts should match.");
Assert.That(actualWaitTime, Is.EqualTo(options.DefaultMaximumReceiveWaitTime), "The wait time should match.");
}
static async Task ReceiveMessages(string connectionString, int numPartitions, int numClients, bool verbose)
{
Console.WriteLine($"Receiving messages from {numPartitions} partitions using {numClients} client instances");
var clients = new EventHubClient[numClients];
for (var i = 0; i < numClients; i++)
{
clients[i] = new EventHubClient(connectionString, _eventHubName);
}
try
{
var client = clients.First();
var partitionIds = (await client.GetPartitionIdsAsync()).Take(numPartitions);
var partitions = await Task.WhenAll(partitionIds.Select(id => client.GetPartitionPropertiesAsync(id)));
var totalCount = (long)0;
foreach (var partition in partitions)
{
var begin = partition.BeginningSequenceNumber;
var end = partition.LastEnqueuedSequenceNumber;
var count = end - begin + 1;
totalCount += count;
if (verbose)
{
Console.WriteLine($"Partition: {partition.Id}, Begin: {begin}, End: {end}, Count: {count}");
}
}
if (verbose)
{
Console.WriteLine($"Total Count: {totalCount}");
}
var consumers = new EventHubConsumer[numPartitions];
for (var i = 0; i < numPartitions; i++)
{
consumers[i] = clients[i % numClients].CreateConsumer(EventHubConsumer.DefaultConsumerGroupName, partitions[i].Id, EventPosition.Earliest);
}
try
{
var receiveTasks = new Task <(int messagesReceived, long lastSequenceNumber)> [numPartitions];
var sw = Stopwatch.StartNew();
for (var i = 0; i < numPartitions; i++)
{
receiveTasks[i] = ReceiveAllMessages(consumers[i], partitions[i]);
}
var results = await Task.WhenAll(receiveTasks);
sw.Stop();
var elapsed = sw.Elapsed.TotalSeconds;
var messagesReceived = results.Select(r => r.messagesReceived).Sum();
var messagesPerSecond = messagesReceived / elapsed;
var megabytesPerSecond = (messagesPerSecond * _bytesPerMessage) / (1024 * 1024);
Console.WriteLine($"Received {messagesReceived} messages of size {_bytesPerMessage} in {elapsed:N2}s " +
$"({messagesPerSecond:N2} msg/s, {megabytesPerSecond:N2} MB/s)");
}
public async Task PartitionProcessorCanCreateACheckpointFromPartitionContext()
{
await using (EventHubScope scope = await EventHubScope.CreateAsync(1))
{
var connectionString = TestEnvironment.BuildConnectionStringForEventHub(scope.EventHubName);
await using (var client = new EventHubClient(connectionString))
{
// Send some events.
EventData lastEvent;
var dummyEvent = new EventData(Encoding.UTF8.GetBytes("I'm dummy."));
var partitionId = (await client.GetPartitionIdsAsync()).First();
await using (EventHubProducer producer = client.CreateProducer())
await using (EventHubConsumer consumer = client.CreateConsumer(EventHubConsumer.DefaultConsumerGroupName, partitionId, EventPosition.Earliest))
{
// Send a few events. We are only interested in the last one of them.
var dummyEventsCount = 10;
for (int i = 0; i < dummyEventsCount; i++)
{
await producer.SendAsync(dummyEvent);
}
// Receive the events; because there is some non-determinism in the messaging flow, the
// sent events may not be immediately available. Allow for a small number of attempts to receive, in order
// to account for availability delays.
var receivedEvents = new List <EventData>();
var index = 0;
while ((receivedEvents.Count < dummyEventsCount) && (++index < ReceiveRetryLimit))
{
receivedEvents.AddRange(await consumer.ReceiveAsync(dummyEventsCount + 10, TimeSpan.FromMilliseconds(25)));
}
Assert.That(receivedEvents.Count, Is.EqualTo(dummyEventsCount));
lastEvent = receivedEvents.Last();
}
// Create a partition manager so we can retrieve the created checkpoint from it.
var partitionManager = new InMemoryPartitionManager();
// Create the event processor manager to manage our event processors.
var eventProcessorManager = new EventProcessorManager
(
EventHubConsumer.DefaultConsumerGroupName,
client,
partitionManager,
onProcessEvents: (partitionContext, events, cancellationToken) =>
{
// Make it a list so we can safely enumerate it.
var eventsList = new List <EventData>(events ?? Enumerable.Empty <EventData>());
if (eventsList.Any())
{
partitionContext.UpdateCheckpointAsync(eventsList.Last());
}
}
);
eventProcessorManager.AddEventProcessors(1);
// Start the event processors.
await eventProcessorManager.StartAllAsync();
// Make sure the event processors have enough time to stabilize and receive events.
await eventProcessorManager.WaitStabilization();
// Stop the event processors.
await eventProcessorManager.StopAllAsync();
// Validate results.
IEnumerable <PartitionOwnership> ownershipEnumerable = await partitionManager.ListOwnershipAsync(client.FullyQualifiedNamespace, client.EventHubName, EventHubConsumer.DefaultConsumerGroupName);
Assert.That(ownershipEnumerable, Is.Not.Null);
Assert.That(ownershipEnumerable.Count, Is.EqualTo(1));
PartitionOwnership ownership = ownershipEnumerable.Single();
Assert.That(ownership.Offset.HasValue, Is.True);
Assert.That(ownership.Offset.Value, Is.EqualTo(lastEvent.Offset));
Assert.That(ownership.SequenceNumber.HasValue, Is.True);
Assert.That(ownership.SequenceNumber.Value, Is.EqualTo(lastEvent.SequenceNumber));
}
}
}
public async Task EventProcessorCanReceiveFromCheckpointedEventPosition()
{
await using (EventHubScope scope = await EventHubScope.CreateAsync(1))
{
var connectionString = TestEnvironment.BuildConnectionStringForEventHub(scope.EventHubName);
await using (var client = new EventHubClient(connectionString))
{
int receivedEventsCount = 0;
// Send some events.
var expectedEventsCount = 20;
var dummyEvent = new EventData(Encoding.UTF8.GetBytes("I'm dummy."));
long?checkpointedSequenceNumber = default;
var partitionId = (await client.GetPartitionIdsAsync()).First();
await using (EventHubProducer producer = client.CreateProducer())
await using (EventHubConsumer consumer = client.CreateConsumer(EventHubConsumer.DefaultConsumerGroupName, partitionId, EventPosition.Earliest))
{
// Send a few dummy events. We are not expecting to receive these.
var dummyEventsCount = 30;
for (int i = 0; i < dummyEventsCount; i++)
{
await producer.SendAsync(dummyEvent);
}
// Receive the events; because there is some non-determinism in the messaging flow, the
// sent events may not be immediately available. Allow for a small number of attempts to receive, in order
// to account for availability delays.
var receivedEvents = new List <EventData>();
var index = 0;
while ((receivedEvents.Count < dummyEventsCount) && (++index < ReceiveRetryLimit))
{
receivedEvents.AddRange(await consumer.ReceiveAsync(dummyEventsCount + 10, TimeSpan.FromMilliseconds(25)));
}
Assert.That(receivedEvents.Count, Is.EqualTo(dummyEventsCount));
checkpointedSequenceNumber = receivedEvents.Last().SequenceNumber;
// Send the events we expect to receive.
for (int i = 0; i < expectedEventsCount; i++)
{
await producer.SendAsync(dummyEvent);
}
}
// Create a partition manager and add an ownership with a checkpoint in it.
var partitionManager = new InMemoryPartitionManager();
await partitionManager.ClaimOwnershipAsync(new List <PartitionOwnership>()
{
new PartitionOwnership(client.FullyQualifiedNamespace, client.EventHubName,
EventHubConsumer.DefaultConsumerGroupName, "ownerIdentifier", partitionId,
sequenceNumber: checkpointedSequenceNumber, lastModifiedTime: DateTimeOffset.UtcNow)
});
// Create the event processor manager to manage our event processors.
var eventProcessorManager = new EventProcessorManager
(
EventHubConsumer.DefaultConsumerGroupName,
client,
partitionManager,
onProcessEvents: (partitionContext, events, cancellationToken) =>
{
// Make it a list so we can safely enumerate it.
var eventsList = new List <EventData>(events ?? Enumerable.Empty <EventData>());
if (eventsList.Count > 0)
{
Interlocked.Add(ref receivedEventsCount, eventsList.Count);
}
}
);
eventProcessorManager.AddEventProcessors(1);
// Start the event processors.
await eventProcessorManager.StartAllAsync();
// Make sure the event processors have enough time to stabilize and receive events.
await eventProcessorManager.WaitStabilization();
// Stop the event processors.
await eventProcessorManager.StopAllAsync();
// Validate results.
Assert.That(receivedEventsCount, Is.EqualTo(expectedEventsCount));
}
}
}
/// <summary>
/// Runs the sample using the specified Event Hubs connection information.
/// </summary>
///
/// <param name="connectionString">The connection string for the Event Hubs namespace that the sample should target.</param>
/// <param name="eventHubName">The name of the Event Hub, sometimes known as its path, that she sample should run against.</param>
///
public async Task RunAsync(string connectionString,
string eventHubName)
{
// An Event Hub consumer is associated with a specific Event Hub partition and a consumer group. The consumer group is
// a label that identifies one or more consumers as a set. Often, consumer groups are named after the responsibility
// of the consumer in an application, such as "Telemetry" or "OrderProcessing". When an Event Hub is created, a default
// consumer group is created with it, called "$Default."
//
// Each consumer has a unique view of the events in the partition, meaning that events are available to all consumers
// and are not removed from the partition when a consumer reads them. This allows for different consumers to read and
// process events from the partition at different speeds and beginning with different events without interfering with
// one another.
//
// When events are published, they will continue to exist in the partition and be available for consuming until they
// reach an age where they are older than the retention period.
// (see: https://docs.microsoft.com/en-us/azure/event-hubs/event-hubs-faq#what-is-the-maximum-retention-period-for-events)
//
// Because events are not removed from the partition when consuming, a consumer must specify where in the partition it
// would like to begin reading events. For example, this may be starting from the very beginning of the stream, at an
// offset from the beginning, the next event available after a specific point in time, or at a specific event.
// We will start by creating a client using its default set of options.
await using (var client = new EventHubClient(connectionString, eventHubName))
{
// With our client, we can now inspect the partitions and find the identifier
// of the first.
string firstPartition = (await client.GetPartitionIdsAsync()).First();
// In this example, we will create our consumer for the first partition in the Event Hub, using the default consumer group
// that is created with an Event Hub. Our consumer will begin watching the partition at the very end, reading only new events
// that we will publish for it.
await using (EventHubConsumer consumer = client.CreateConsumer(EventHubConsumer.DefaultConsumerGroupName, firstPartition, EventPosition.Latest))
await using (EventHubProducer producer = client.CreateProducer(new EventHubProducerOptions {
PartitionId = firstPartition
}))
{
// Because our consumer is reading from the latest position, it won't see events that have previously
// been published. Before we can publish the events, we will need to ask the consumer to perform an operation,
// because it opens its connection only when it needs to. The first receive that we ask of it will not see
// any events, but will allow the consumer to start watching the partition.
//
// Because the maximum wait time is specivied as zero, this call will return immediately and will not
// have consumed any events.
await consumer.ReceiveAsync(1, TimeSpan.Zero);
// Now that the consumer is watching the partition, let's publish the event that we would like to
// receive.
await producer.SendAsync(new EventData(Encoding.UTF8.GetBytes("Hello, Event Hubs!")));
Console.WriteLine("The event batch has been published.");
// Because publishing and receving events is asynchronous, the events that we published may not
// be immediately available for our consumer to see.
//
// Each receive specifies the maximum amount of events that we would like in the batch and the maximum
// amount of time that we would like to wait for them. If there are enough events available to meet the
// requested amount, they'll be returned immediately. If not, the consumer will wait and collect events
// as they become available in an attempt to reach the requested amount. If the maximum time that we've
// allowed it to wait passes, the consumer will return the events that it has collected so far.
//
// Each Receive call may return between zero and the number of events that we requested, depending on the
// state of events in the partition. Likewise, it may return immediately or take up to the maximum wait
// time that we've allowed.
//
// We will ask for just our event, but allow a fairly long wait period to ensure that we're able to receive it.
// If you observe the time that the call takes, it is extremely likely that the request to recieve will complete
// long before the maximum wait time.
Stopwatch watch = Stopwatch.StartNew();
IEnumerable <EventData> receivedBatch = await consumer.ReceiveAsync(1, TimeSpan.FromSeconds(2.5));
watch.Stop();
// Print out the events that we received.
Console.WriteLine();
Console.WriteLine($"The following events were consumed in { watch.ElapsedMilliseconds } milliseconds:");
foreach (EventData eventData in receivedBatch)
{
// The body of our event was an encoded string; we'll recover the
// message by reversing the encoding process.
string message = Encoding.UTF8.GetString(eventData.Body.ToArray());
Console.WriteLine($"\tMessage: \"{ message }\"");
}
}
}
// At this point, our client, consumer, and producer have passed their "using" scope and have safely been disposed of. We
// have no further obligations.
Console.WriteLine();
}
/// <summary>
/// Runs the sample using the specified Event Hubs connection information.
/// </summary>
///
/// <param name="connectionString">The connection string for the Event Hubs namespace that the sample should target.</param>
/// <param name="eventHubName">The name of the Event Hub, sometimes known as its path, that she sample should run against.</param>
///
public async Task RunAsync(string connectionString,
string eventHubName)
{
// We will start by creating a client using its default set of options.
await using (var client = new EventHubClient(connectionString, eventHubName))
{
// With our client, we can now inspect the partitions and find the identifier of the first.
string firstPartition = (await client.GetPartitionIdsAsync()).First();
// In this example, we will make use of multiple consumers for the first partition in the Event Hub, using the default consumer group
// that is created with an Event Hub. Our initial consumer will begin watching the partition at the very end, reading only new events
// that we will publish for it.
await using (EventHubProducer producer = client.CreateProducer(new EventHubProducerOptions {
PartitionId = firstPartition
}))
{
// Each event that the initial consumer reads will have attributes set that describe the event's place in the
// partition, such as it's offset, sequence number, and the date/time that it was enqueued. These attributes can be
// used to create a new consumer that begins consuming at a known position.
//
// With Event Hubs, it is the responsibility of an application consuming events to keep track of those that it has processed,
// and to manage where in the partition the consumer begins reading events. This is done by using the position information to track
// state, commonly known as "creating a checkpoint."
//
// The goal is to preserve the position of an event in some form of durable state, such as writing it to a database, so that if the
// consuming application crashes or is otherwise restarted, it can retrieve that checkpoint information and use it to create a consumer that
// begins reading at the position where it left off.
//
// It is important to note that there is potential for a consumer to process an event and be unable to preserve the checkpoint. A well-designed
// consumer must be able to deal with processing the same event multiple times without it causing data corruption or otherwise creating issues.
// Event Hubs, like most event streaming systems, guarantees "at least once" delivery; even in cases where the consumer does not experience a restart,
// there is a small possibility that the service will return an event multiple times.
//
// In this example, we will publish a batch of events to be received with an initial consumer. The third event that is consumed will be captured
// and another consumer will use it's attributes to start reading the event that follows, consuming the same set of events that our initial consumer
// read, skipping over the first three.
int eventBatchSize = 50;
EventData thirdEvent;
await using (EventHubConsumer initialConsumer = client.CreateConsumer(EventHubConsumer.DefaultConsumerGroupName, firstPartition, EventPosition.Latest))
{
// The first receive that we ask of it will not see any events, but allows the consumer to start watching the partition. Because
// the maximum wait time is specified as zero, this call will return immediately and will not have consumed any events.
await initialConsumer.ReceiveAsync(1, TimeSpan.Zero);
// Now that the consumer is watching the partition, let's publish a batch of events.
EventData[] eventBatch = new EventData[eventBatchSize];
for (int index = 0; index < eventBatchSize; ++index)
{
eventBatch[index] = new EventData(Encoding.UTF8.GetBytes($"I am event #{ index }"));
}
await producer.SendAsync(eventBatch);
Console.WriteLine($"The event batch with { eventBatchSize } events has been published.");
// We will consume the events until all of the published events have been received.
var receivedEvents = new List <EventData>();
CancellationTokenSource cancellationSource = new CancellationTokenSource();
cancellationSource.CancelAfter(TimeSpan.FromSeconds(30));
await foreach (EventData currentEvent in initialConsumer.SubscribeToEvents(cancellationSource.Token))
{
receivedEvents.Add(currentEvent);
if (receivedEvents.Count >= eventBatchSize)
{
break;
}
}
// Print out the events that we received.
Console.WriteLine();
Console.WriteLine($"The initial consumer processed { receivedEvents.Count } events of the { eventBatchSize } that were published. { eventBatchSize } were expected.");
foreach (EventData eventData in receivedEvents)
{
// The body of our event was an encoded string; we'll recover the
// message by reversing the encoding process.
string message = Encoding.UTF8.GetString(eventData.Body.ToArray());
Console.WriteLine($"\tMessage: \"{ message }\"");
}
// Remember the third event that was consumed.
thirdEvent = receivedEvents[2];
}
// At this point, our initial consumer has passed its "using" scope and has been safely disposed of.
//
// Create a new consumer beginning using the third event as the last sequence number processed; this new consumer will begin reading at the next available
// sequence number, allowing it to read the set of published events beginning with the fourth one.
await using (EventHubConsumer newConsumer = client.CreateConsumer(EventHubConsumer.DefaultConsumerGroupName, firstPartition, EventPosition.FromSequenceNumber(thirdEvent.SequenceNumber.Value)))
{
// We will consume the events using the new consumer until all of the published events have been received.
CancellationTokenSource cancellationSource = new CancellationTokenSource();
cancellationSource.CancelAfter(TimeSpan.FromSeconds(30));
int expectedCount = (eventBatchSize - 3);
var receivedEvents = new List <EventData>();
await foreach (EventData currentEvent in newConsumer.SubscribeToEvents(cancellationSource.Token))
{
receivedEvents.Add(currentEvent);
if (receivedEvents.Count >= expectedCount)
{
break;
}
}
// Print out the events that we received.
Console.WriteLine();
Console.WriteLine();
Console.WriteLine($"The new consumer processed { receivedEvents.Count } events of the { eventBatchSize } that were published. { expectedCount } were expected.");
foreach (EventData eventData in receivedEvents)
{
// The body of our event was an encoded string; we'll recover the
// message by reversing the encoding process.
string message = Encoding.UTF8.GetString(eventData.Body.ToArray());
Console.WriteLine($"\tMessage: \"{ message }\"");
}
}
}
}
// At this point, our client, all consumers, and producer have passed their "using" scope and have safely been disposed of. We
// have no further obligations.
Console.WriteLine();
}
/// <summary>
/// Runs the sample using the specified Event Hubs connection information.
/// </summary>
///
/// <param name="connectionString">The connection string for the Event Hubs namespace that the sample should target.</param>
/// <param name="eventHubName">The name of the Event Hub, sometimes known as its path, that she sample should run against.</param>
///
public async Task RunAsync(string connectionString,
string eventHubName)
{
// An Event Hub consumer is associated with a specific Event Hub partition and a consumer group. The consumer group is
// a label that identifies one or more consumers as a set. Often, consumer groups are named after the responsibility
// of the consumer in an application, such as "Telemetry" or "OrderProcessing". When an Event Hub is created, a default
// consumer group is created with it, called "$Default."
//
// Each consumer has a unique view of the events in the partition, meaning that events are available to all consumers
// and are not removed from the partition when a consumer reads them. This allows for different consumers to read and
// process events from the partition at different speeds and beginning with different events without interfering with
// one another.
//
// When events are published, they will continue to exist in the partition and be available for consuming until they
// reach an age where they are older than the retention period.
// (see: https://docs.microsoft.com/en-us/azure/event-hubs/event-hubs-faq#what-is-the-maximum-retention-period-for-events)
//
// Because events are not removed from the partition when consuming, a consumer must specify where in the partition it
// would like to begin reading events. For example, this may be starting from the very beginning of the stream, at an
// offset from the beginning, the next event available after a specific point in time, or at a specific event.
// We will start by creating a client using its default set of options.
await using (var client = new EventHubClient(connectionString, eventHubName))
{
// With our client, we can now inspect the partitions and find the identifier
// of the first.
string firstPartition = (await client.GetPartitionIdsAsync()).First();
// In this example, we will create our consumer for the first partition in the Event Hub, using the default consumer group
// that is created with an Event Hub. Our consumer will begin watching the partition at the very end, reading only new events
// that we will publish for it.
await using (EventHubConsumer consumer = client.CreateConsumer(EventHubConsumer.DefaultConsumerGroupName, firstPartition, EventPosition.Latest))
await using (EventHubProducer producer = client.CreateProducer(new EventHubProducerOptions {
PartitionId = firstPartition
}))
{
// Because our consumer is reading from the latest position, it won't see events that have previously
// been published. Before we can publish the events, we will need to ask the consumer to perform an operation,
// because it opens its connection only when it needs to. The first receive that we ask of it will not see
// any events, but will allow the consumer to start watching the partition.
//
// Because the maximum wait time is specified as zero, this call will return immediately and will not
// have consumed any events.
await consumer.ReceiveAsync(1, TimeSpan.Zero);
// Now that the consumer is watching the partition, let's publish the events that we would like to
// receive.
EventData[] eventsToPublish = new EventData[]
{
new EventData(Encoding.UTF8.GetBytes("Hello, Event Hubs!")),
new EventData(Encoding.UTF8.GetBytes("Goodbye, Event Hubs!"))
};
await producer.SendAsync(eventsToPublish);
Console.WriteLine("The event batch has been published.");
// Because publishing and receiving events is asynchronous, the events that we published may not be immediately
// available for our consumer to see. We will iterate over the available events in the partition, which should be
// just the events that we published.
//
// When a maximum wait time is specified, the iteration will ensure that it returns control after that time has elapsed,
// whether or not an event is available in the partition. If no event was available a null value will be emitted instead.
// This is intended to return control to the loop and avoid blocking for an indeterminate period of time to allow event
// processors to verify that the iterator is still consuming the partition and to make decisions on whether or not to continue
// if events are not arriving.
//
// For this example, we will specify a maximum wait time, and won't exit the loop until we've received at least one more
// event than we published, which is expected to be a null value triggered by exceeding the wait time.
//
// To be sure that we do not end up in an infinite loop, we will specify a fairly long time to allow processing to complete
// then cancel.
CancellationTokenSource cancellationSource = new CancellationTokenSource();
cancellationSource.CancelAfter(TimeSpan.FromSeconds(30));
TimeSpan maximumWaitTime = TimeSpan.FromMilliseconds(250);
List <EventData> receivedEvents = new List <EventData>();
Stopwatch watch = Stopwatch.StartNew();
await foreach (EventData currentEvent in consumer.SubscribeToEvents(maximumWaitTime, cancellationSource.Token))
{
receivedEvents.Add(currentEvent);
if (receivedEvents.Count > eventsToPublish.Length)
{
watch.Stop();
break;
}
}
// Print out the events that we received.
Console.WriteLine();
Console.WriteLine($"The following events were consumed in { watch.ElapsedMilliseconds } milliseconds:");
foreach (EventData eventData in receivedEvents)
{
// The body of our event was an encoded string; we'll recover the
// message by reversing the encoding process.
string message = (eventData == null) ? "<< This was a null event >>" : Encoding.UTF8.GetString(eventData.Body.ToArray());
Console.WriteLine($"\tMessage: \"{ message }\"");
}
}
}
// At this point, our client, consumer, and producer have passed their "using" scope and have safely been disposed of. We
// have no further obligations.
Console.WriteLine();
}
/// <summary>
/// Runs the sample using the specified Event Hubs connection information.
/// </summary>
///
/// <param name="connectionString">The connection string for the Event Hubs namespace that the sample should target.</param>
/// <param name="eventHubName">The name of the Event Hub, sometimes known as its path, that she sample should run against.</param>
///
public async Task RunAsync(string connectionString,
string eventHubName)
{
// We will start by creating a client using its default set of options.
await using (var client = new EventHubClient(connectionString, eventHubName))
{
// With our client, we can now inspect the partitions and find the identifier
// of the first.
string firstPartition = (await client.GetPartitionIdsAsync()).First();
// In this example, we will create our consumer for the first partition in the Event Hub, using the default consumer group
// that is created with an Event Hub. Our consumer will begin watching the partition at the very end, reading only new events
// that we will publish for it.
await using (EventHubConsumer consumer = client.CreateConsumer(EventHubConsumer.DefaultConsumerGroupName, firstPartition, EventPosition.Latest))
await using (EventHubProducer producer = client.CreateProducer(new EventHubProducerOptions {
PartitionId = firstPartition
}))
{
// Because our consumer is reading from the latest position, it won't see events that have previously
// been published. Before we can publish the events, we will need to ask the consumer to perform an operation,
// because it opens its connection only when it needs to. The first receive that we ask of it will not see
// any events, but will allow the consumer to start watching the partition.
//
// Because the maximum wait time is specivied as zero, this call will return immediately and will not
// have consumed any events.
await consumer.ReceiveAsync(1, TimeSpan.Zero);
// Now that the consumer is watching the partition, let's publish a fair sized batch of events
// we would like for it to consume.
int eventBatchSize = 100;
EventData[] eventBatch = new EventData[eventBatchSize];
for (int index = 0; index < eventBatchSize; ++index)
{
eventBatch[index] = new EventData(Encoding.UTF8.GetBytes($"I am event #{ index }"));
}
await producer.SendAsync(eventBatch);
Console.WriteLine($"The event batch with { eventBatchSize } events has been published.");
// To allow for throughput in our application, we will process the published events by consuming them in
// small batches with a small wait time. This will allow us to receive and process more quickly than blocking
// to wait on a larger batch size.
//
// The values that are used in this example are intended just for illustration and not as guidance for a recommended
// set of defaults. In a real-world application, determining the right balance of batch size and wait time to achieve
// the desired performance will often vary depending on the application and event data being consumed. It is an area
// where some experimentation in the application context may prove helpful.
//
// Our example will attempt to read about 1/5 of the batch at a time, which should result in the need for 5 batches to
// be consumed. Because publishing and receving events is asynchronous, the events that we published may not be
// immediately available for our consumer to see. To compensate, we will allow for a small number of extra attempts beyond
// the expected 5 to to be sure that we don't stop reading before we receive all of our events.
var receivedEvents = new List <EventData>();
int consumeBatchSize = (int)Math.Floor(eventBatchSize / 5.0f);
int maximumAttempts = 15;
int attempts = 0;
while ((receivedEvents.Count < eventBatchSize) && (++attempts < maximumAttempts))
{
// Each receive, we ask for the maximum amount of events that we would like in the batch and
// specify the maximum amount of time that we would like to wait for them.
//
// The batch of events will be returned to us when either we have read our maximum number of events
// or when the time that we asked to wait has elapsed. This means that a batch we receive may have
// between zero and the maximum we asked for, depending on what was available in the partition.
//
// For this attempt, we will ask to receive our computed batch size (1/5 of published events) and wait, at most,
// 25 milliseconds to receive them. We'll then process them and if we haven't gotten all that we published, we'll
// make another attempt until either we have them or we have tried for our maximum number of attempts.
IEnumerable <EventData> receivedBatch = await consumer.ReceiveAsync(consumeBatchSize, TimeSpan.FromMilliseconds(25));
receivedEvents.AddRange(receivedBatch);
}
// Print out the events that we received.
Console.WriteLine();
Console.WriteLine($"Events Consumed: { receivedEvents.Count }");
foreach (EventData eventData in receivedEvents)
{
// The body of our event was an encoded string; we'll recover the
// message by reversing the encoding process.
string message = Encoding.UTF8.GetString(eventData.Body.ToArray());
Console.WriteLine($"\tMessage: \"{ message }\"");
}
}
}
// At this point, our client, consumer, and producer have passed their "using" scope and have safely been disposed of. We
// have no further obligations.
Console.WriteLine();
}
