public static void ClosestPointOnPolygon(RenderVertex3D[] rgv, Vertex2D pvin, bool fClosed, out Vertex2D pvOut, out int piSeg)
{
var count = rgv.Length;
var minDist = Constants.FloatMax;
piSeg = -1; // in case we are not next to the line
pvOut = new Vertex2D();
var loopCount = count;
if (!fClosed)
{
--loopCount; // Don"t check segment running from the end point to the beginning point
}
// Go through line segment, calculate distance from point to the line
// then pick the shortest distance
for (var i = 0; i < loopCount; ++i)
{
var p2 = i < count - 1 ? i + 1 : 0;
var rgvi = new RenderVertex3D();
rgvi.Set(rgv[i].X, rgv[i].Y, rgv[i].Z);
var rgvp2 = new RenderVertex3D();
rgvp2.Set(rgv[p2].X, rgv[p2].Y, rgv[p2].Z);
var a = rgvi.Y - rgvp2.Y;
var b = rgvp2.X - rgvi.X;
var c = -(a * rgvi.X + b * rgvi.Y);
var dist = MathF.Abs(a * pvin.X + b * pvin.Y + c) / MathF.Sqrt(a * a + b * b);
if (dist < minDist)
{
// Assuming we got a segment that we are closet to, calculate the intersection
// of the line with the perpendicular line projected from the point,
// to find the closest point on the line
var d = -b;
var f = -(d * pvin.X + a * pvin.Y);
var det = a * a - b * d;
var invDet = det != 0.0f ? 1.0f / det : 0.0f;
var intersectX = (b * f - a * c) * invDet;
var intersectY = (c * d - a * f) * invDet;
// If the intersect point lies on the polygon segment
// (not out in space), then make this the closest known point
if (intersectX >= MathF.Min(rgvi.X, rgvp2.X) - 0.1 &&
intersectX <= MathF.Max(rgvi.X, rgvp2.X) + 0.1 &&
intersectY >= MathF.Min(rgvi.Y, rgvp2.Y) - 0.1 &&
intersectY <= MathF.Max(rgvi.Y, rgvp2.Y) + 0.1)
{
minDist = dist;
var seg = i;
pvOut.X = intersectX;
pvOut.Y = intersectY;
piSeg = seg;
}
}
}
}
public static void ComputeNormals(Vertex3DNoTex2[] vertices, int numVertices, int[] indices, int numIndices)
{
for (var i = 0; i < numVertices; i++)
{
vertices[i].Nx = vertices[i].Ny = vertices[i].Nz = 0.0f;
}
for (var i = 0; i < numIndices; i += 3)
{
var a = vertices[indices[i]];
var b = vertices[indices[i + 1]];
var c = vertices[indices[i + 2]];
var e0 = new Vertex3D(b.X - a.X, b.Y - a.Y, b.Z - a.Z);
var e1 = new Vertex3D(c.X - a.X, c.Y - a.Y, c.Z - a.Z);
var normal = Vertex3D.CrossProduct(e0, e1);
normal.NormalizeSafe();
a.Nx += normal.X; a.Ny += normal.Y; a.Nz += normal.Z;
b.Nx += normal.X; b.Ny += normal.Y; b.Nz += normal.Z;
c.Nx += normal.X; c.Ny += normal.Y; c.Nz += normal.Z;
vertices[indices[i]] = a;
vertices[indices[i + 1]] = b;
vertices[indices[i + 2]] = c;
}
for (var i = 0; i < numVertices; i++)
{
var v = vertices[i];
var l = v.Nx * v.Nx + v.Ny * v.Ny + v.Nz * v.Nz;
var invL = l >= Constants.FloatMin ? 1.0f / MathF.Sqrt(l) : 0.0f;
v.Nx *= invL;
v.Ny *= invL;
v.Nz *= invL;
vertices[i] = v;
}
}
public static float[] GetTextureCoords(DragPointData[] dragPoints, IRenderVertex[] vv)
{
var texPoints = new List <int>();
var renderPoints = new List <int>();
var noCoords = false;
var numPoints = vv.Length;
var controlPoint = 0;
var coords = new float[numPoints];
for (var i = 0; i < numPoints; ++i)
{
var prv = vv[i];
if (prv.IsControlPoint)
{
if (!dragPoints[controlPoint].HasAutoTexture)
{
texPoints.Add(controlPoint);
renderPoints.Add(i);
}
++controlPoint;
}
}
if (texPoints.Count == 0)
{
// Special case - no texture coordinates were specified
// Make them up starting at point 0
texPoints.Add(0);
renderPoints.Add(0);
noCoords = true;
}
// Wrap the array around so we cover the last section
texPoints.Add(texPoints[0] + dragPoints.Length);
renderPoints.Add(renderPoints[0] + numPoints);
for (var i = 0; i < texPoints.Count - 1; ++i)
{
var startRenderPoint = renderPoints[i] % numPoints;
var endRenderPoint = renderPoints[i < numPoints - 1 ? i + 1 : 0] % numPoints;
float startTexCoord;
float endTexCoord;
if (noCoords)
{
startTexCoord = 0.0f;
endTexCoord = 1.0f;
}
else
{
startTexCoord = dragPoints[texPoints[i] % dragPoints.Length].TextureCoord;
endTexCoord = dragPoints[texPoints[i + 1] % dragPoints.Length].TextureCoord;
}
var deltacoord = endTexCoord - startTexCoord;
if (endRenderPoint <= startRenderPoint)
{
endRenderPoint += numPoints;
}
var totalLength = 0.0f;
for (var l = startRenderPoint; l < endRenderPoint; ++l)
{
var pv1 = vv[l % numPoints];
var pv2 = vv[(l + 1) % numPoints];
var dx = pv1.GetX() - pv2.GetX();
var dy = pv1.GetY() - pv2.GetY();
var length = MathF.Sqrt(dx * dx + dy * dy);
totalLength += length;
}
var partialLength = 0.0f;
for (var l = startRenderPoint; l < endRenderPoint; ++l)
{
var pv1 = vv[l % numPoints];
var pv2 = vv[(l + 1) % numPoints];
var dx = pv1.GetX() - pv2.GetX();
var dy = pv1.GetY() - pv2.GetY();
var length = MathF.Sqrt(dx * dx + dy * dy);
if (totalLength == 0.0)
{
totalLength = 1.0f;
}
var texCoord = partialLength / totalLength;
coords[l % numPoints] = texCoord * deltacoord + startTexCoord;
partialLength += length;
}
}
return(coords);
}
public float Length()
{
return(MathF.Sqrt(X * X + Y * Y));
}
public new float Length()
{
return(MathF.Sqrt(X * X + Y * Y + Z * Z));
}
public float Magnitude() => MathF.Sqrt(this.Dot(this));
public RampVertex GetRampVertex(float tableHeight, float accuracy, bool incWidth)
{
var result = new RampVertex();
// vvertex are the 2D vertices forming the central curve of the ramp as seen from above
var vertex = GetCentralCurve(accuracy);
var numVertices = vertex.Length;
result.VertexCount = numVertices;
result.PointHeights = new float[numVertices];
result.Cross = new bool[numVertices];
result.PointRatios = new float[numVertices];
result.MiddlePoints = new Vertex2D[numVertices];
result.RgvLocal = new Vertex2D[_data.Type != RampType.RampTypeFlat ? (numVertices + 1) * 2 : numVertices * 2];
// Compute an approximation to the length of the central curve
// by adding up the lengths of the line segments.
var totalLength = 0f;
var bottomHeight = _data.HeightBottom + tableHeight;
var topHeight = _data.HeightTop + tableHeight;
for (var i = 0; i < numVertices - 1; i++)
{
var v1 = vertex[i];
var v2 = vertex[i + 1];
var dx = v1.X - v2.X;
var dy = v1.Y - v2.Y;
var length = MathF.Sqrt(dx * dx + dy * dy);
totalLength += length;
}
var currentLength = 0f;
for (var i = 0; i < numVertices; i++)
{
// clamp next and prev as ramps do not loop
var prev = vertex[i > 0 ? i - 1 : i];
var next = vertex[i < numVertices - 1 ? i + 1 : i];
var middle = vertex[i];
result.Cross[i] = middle.IsControlPoint;
var normal = new Vertex2D();
// Get normal at this point
// Notice that these values equal the ones in the line
// equation and could probably be substituted by them.
var v1Normal = new Vertex2D(prev.Y - middle.Y, middle.X - prev.X); // vector vmiddle-vprev rotated RIGHT
var v2Normal = new Vertex2D(middle.Y - next.Y, next.X - middle.X); // vector vnext-vmiddle rotated RIGHT
// special handling for beginning and end of the ramp, as ramps do not loop
if (i == numVertices - 1)
{
v1Normal.Normalize();
normal = v1Normal;
}
else if (i == 0)
{
v2Normal.Normalize();
normal = v2Normal;
}
else
{
v1Normal.Normalize();
v2Normal.Normalize();
if (MathF.Abs(v1Normal.X - v2Normal.X) < 0.0001 && MathF.Abs(v1Normal.Y - v2Normal.Y) < 0.0001)
{
// Two parallel segments
normal = v1Normal;
}
else
{
// Find intersection of the two edges meeting this points, but
// shift those lines outwards along their normals
// First line
var a = prev.Y - middle.Y;
var b = middle.X - prev.X;
// Shift line along the normal
var c = -(a * (prev.X - v1Normal.X) + b * (prev.Y - v1Normal.Y));
// Second line
var d = next.Y - middle.Y;
var e = middle.X - next.X;
// Shift line along the normal
var f = -(d * (next.X - v2Normal.X) + e * (next.Y - v2Normal.Y));
var det = a * e - b * d;
var invDet = det != 0.0 ? 1.0f / det : 0.0f;
var intersectX = (b * f - e * c) * invDet;
var intersectY = (c * d - a * f) * invDet;
normal.X = middle.X - intersectX;
normal.Y = middle.Y - intersectY;
}
}
// Update current length along the ramp.
var dx = prev.X - middle.X;
var dy = prev.Y - middle.Y;
var length = MathF.Sqrt(dx * dx + dy * dy);
currentLength += length;
var percentage = currentLength / totalLength;
var currentWidth = percentage * (_data.WidthTop - _data.WidthBottom) + _data.WidthBottom;
result.PointHeights[i] = middle.Z + percentage * (topHeight - bottomHeight) + bottomHeight;
AssignHeightToControlPoint(new Vertex2D(vertex[i].X, vertex[i].Y), middle.Z + percentage * (topHeight - bottomHeight) + bottomHeight);
result.PointRatios[i] = 1.0f - percentage;
// only change the width if we want to create vertices for rendering or for the editor
// the collision engine uses flat type ramps
if (IsHabitrail() && _data.Type != RampType.RampType1Wire)
{
currentWidth = _data.WireDistanceX;
if (incWidth)
{
currentWidth += 20.0f;
}
}
else if (_data.Type == RampType.RampType1Wire)
{
currentWidth = _data.WireDiameter;
}
result.MiddlePoints[i] = new Vertex2D(middle.X, middle.Y) + normal;
result.RgvLocal[i] = new Vertex2D(middle.X, middle.Y) + currentWidth * 0.5f * normal;
result.RgvLocal[numVertices * 2 - i - 1] = new Vertex2D(middle.X, middle.Y) - currentWidth * 0.5f * normal;
}
return(result);
}
private Vertex3DNoTex2[] CreateWire(int numRings, int numSegments, IReadOnlyList <Vertex2D> midPoints, IReadOnlyList <float> initialHeights)
{
var vertices = new Vertex3DNoTex2[numRings * numSegments];
var prev = new Vertex3D();
var index = 0;
for (var i = 0; i < numRings; i++)
{
var i2 = i == numRings - 1 ? i : i + 1;
var height = initialHeights[i];
var tangent = new Vertex3D(
midPoints[i2].X - midPoints[i].X,
midPoints[i2].Y - midPoints[i].Y,
initialHeights[i2] - initialHeights[i]
);
if (i == numRings - 1)
{
// for the last spline point use the previous tangent again, otherwise we won't see the complete wire (it stops one control point too early)
tangent.X = midPoints[i].X - midPoints[i - 1].X;
tangent.Y = midPoints[i].Y - midPoints[i - 1].Y;
}
Vertex3D biNormal;
Vertex3D normal;
if (i == 0)
{
var up = new Vertex3D(
midPoints[i2].X + midPoints[i].X,
midPoints[i2].Y + midPoints[i].Y,
initialHeights[i2] - height
);
normal = Vertex3D.CrossProduct(tangent, up); //normal
biNormal = Vertex3D.CrossProduct(tangent, normal);
}
else
{
normal = Vertex3D.CrossProduct(prev, tangent);
biNormal = Vertex3D.CrossProduct(tangent, normal);
}
biNormal.Normalize();
normal.Normalize();
prev = biNormal;
var invNumRings = 1.0f / numRings;
var invNumSegments = 1.0f / numSegments;
var u = i * invNumRings;
for (var j = 0; j < numSegments; j++, index++)
{
var v = (j + u) * invNumSegments;
var tmp = Vertex3D.GetRotatedAxis(j * (360.0f * invNumSegments), tangent, normal) * (_data.WireDiameter * 0.5f);
vertices[index] = new Vertex3DNoTex2 {
X = midPoints[i].X + tmp.X,
Y = midPoints[i].Y + tmp.Y,
Z = height + tmp.Z,
Tu = u,
Tv = v
};
// normals
var n = new Vertex3D(
vertices[index].X - midPoints[i].X,
vertices[index].Y - midPoints[i].Y,
vertices[index].Z - height
);
var len = 1.0f / MathF.Sqrt(n.X * n.X + n.Y * n.Y + n.Z * n.Z);
vertices[index].Nx = n.X * len;
vertices[index].Ny = n.Y * len;
vertices[index].Nz = n.Z * len;
}
}
return(vertices);
}
private Mesh GenerateTopMesh(float tableWidth, float tableHeight, float zHeight)
{
var topMesh = new Mesh("Top");
var vVertex = DragPoint.GetRgVertex <RenderVertex2D, CatmullCurve2DCatmullCurveFactory>(_data.DragPoints);
var numVertices = vVertex.Length;
var rgNormal = new Vertex2D[numVertices];
for (var i = 0; i < numVertices; i++)
{
var pv1 = vVertex[i];
var pv2 = vVertex[i < numVertices - 1 ? i + 1 : 0];
var dx = pv1.X - pv2.X;
var dy = pv1.Y - pv2.Y;
if (dx != 0.0f || dy != 0.0f)
{
var invLen = 1.0f / MathF.Sqrt(dx * dx + dy * dy);
rgNormal[i] = new Vertex2D {
X = dy * invLen, Y = dx * invLen
};
}
else
{
rgNormal[i] = new Vertex2D {
X = 0.0f, Y = 0.0f
};
}
}
// draw top
var vPoly = new List <int>(new int[numVertices]);
for (var i = 0; i < numVertices; i++)
{
vPoly[i] = i;
}
topMesh.Indices = Mesh.PolygonToTriangles(vVertex, vPoly);
var numPolys = topMesh.Indices.Length / 3;
if (numPolys == 0)
{
// no polys to render leave vertex buffer undefined
return(null);
}
var heightNotDropped = _data.HeightTop;
var heightDropped = _data.HeightBottom + 0.1;
var invTableWidth = 1.0f / tableWidth;
var invTableHeight = 1.0f / tableHeight;
Vertex3DNoTex2[][] vertsTop = { new Vertex3DNoTex2[numVertices], new Vertex3DNoTex2[numVertices], new Vertex3DNoTex2[numVertices] };
for (var i = 0; i < numVertices; i++)
{
var pv0 = vVertex[i];
vertsTop[0][i] = new Vertex3DNoTex2 {
X = pv0.X,
Y = pv0.Y,
Z = heightNotDropped + zHeight,
Tu = pv0.X * invTableWidth,
Tv = pv0.Y * invTableHeight,
Nx = 0,
Ny = 0,
Nz = 1.0f
};
vertsTop[1][i] = new Vertex3DNoTex2 {
X = pv0.X,
Y = pv0.Y,
Z = (float)heightDropped,
Tu = pv0.X * invTableWidth,
Tv = pv0.Y * invTableHeight,
Nx = 0,
Ny = 0,
Nz = 1.0f
};
vertsTop[2][i] = new Vertex3DNoTex2 {
X = pv0.X,
Y = pv0.Y,
Z = _data.HeightBottom,
Tu = pv0.X * invTableWidth,
Tv = pv0.Y * invTableHeight,
Nx = 0,
Ny = 0,
Nz = -1.0f
};
}
topMesh.Vertices = vertsTop[0];
return(topMesh);
}
private Mesh GenerateSideMesh(float playfieldHeight)
{
var sideMesh = new Mesh("Side");
var vVertex = DragPoint.GetRgVertex <RenderVertex2D, CatmullCurve2DCatmullCurveFactory>(_data.DragPoints);
var rgTexCoord = DragPoint.GetTextureCoords(_data.DragPoints, vVertex);
var numVertices = vVertex.Length;
var rgNormal = new Vertex2D[numVertices];
for (var i = 0; i < numVertices; i++)
{
var pv1 = vVertex[i];
var pv2 = vVertex[i < numVertices - 1 ? i + 1 : 0];
var dx = pv1.X - pv2.X;
var dy = pv1.Y - pv2.Y;
if (dx != 0.0f || dy != 0.0f)
{
var invLen = 1.0f / MathF.Sqrt(dx * dx + dy * dy);
rgNormal[i] = new Vertex2D {
X = dy * invLen, Y = dx * invLen
};
}
else
{
rgNormal[i] = new Vertex2D {
X = 0.0f, Y = 0.0f
};
}
}
var bottom = _data.HeightBottom + playfieldHeight;
var top = _data.HeightTop + playfieldHeight;
var offset = 0;
// Render side
sideMesh.Vertices = new Vertex3DNoTex2[numVertices * 4];
for (var i = 0; i < numVertices; i++)
{
var pv1 = vVertex[i];
var pv2 = vVertex[i < numVertices - 1 ? i + 1 : 0];
var a = i == 0 ? numVertices - 1 : i - 1;
var c = i < numVertices - 1 ? i + 1 : 0;
var vNormal = new [] { new Vertex2D(), new Vertex2D() };
if (pv1.Smooth)
{
vNormal[0].X = (rgNormal[a].X + rgNormal[i].X) * 0.5f;
vNormal[0].Y = (rgNormal[a].Y + rgNormal[i].Y) * 0.5f;
}
else
{
vNormal[0].X = rgNormal[i].X;
vNormal[0].Y = rgNormal[i].Y;
}
if (pv2.Smooth)
{
vNormal[1].X = (rgNormal[i].X + rgNormal[c].X) * 0.5f;
vNormal[1].Y = (rgNormal[i].Y + rgNormal[c].Y) * 0.5f;
}
else
{
vNormal[1].X = rgNormal[i].X;
vNormal[1].Y = rgNormal[i].Y;
}
vNormal[0].Normalize();
vNormal[1].Normalize();
sideMesh.Vertices[offset] = new Vertex3DNoTex2();
sideMesh.Vertices[offset + 1] = new Vertex3DNoTex2();
sideMesh.Vertices[offset + 2] = new Vertex3DNoTex2();
sideMesh.Vertices[offset + 3] = new Vertex3DNoTex2();
sideMesh.Vertices[offset].X = pv1.X;
sideMesh.Vertices[offset].Y = pv1.Y;
sideMesh.Vertices[offset].Z = bottom;
sideMesh.Vertices[offset + 1].X = pv1.X;
sideMesh.Vertices[offset + 1].Y = pv1.Y;
sideMesh.Vertices[offset + 1].Z = top;
sideMesh.Vertices[offset + 2].X = pv2.X;
sideMesh.Vertices[offset + 2].Y = pv2.Y;
sideMesh.Vertices[offset + 2].Z = top;
sideMesh.Vertices[offset + 3].X = pv2.X;
sideMesh.Vertices[offset + 3].Y = pv2.Y;
sideMesh.Vertices[offset + 3].Z = bottom;
sideMesh.Vertices[offset].Tu = rgTexCoord[i];
sideMesh.Vertices[offset].Tv = 1.0f;
sideMesh.Vertices[offset + 1].Tu = rgTexCoord[i];
sideMesh.Vertices[offset + 1].Tv = 0f;
sideMesh.Vertices[offset + 2].Tu = rgTexCoord[c];
sideMesh.Vertices[offset + 2].Tv = 0f;
sideMesh.Vertices[offset + 3].Tu = rgTexCoord[c];
sideMesh.Vertices[offset + 3].Tv = 1.0f;
sideMesh.Vertices[offset].Nx = vNormal[0].X;
sideMesh.Vertices[offset].Ny = -vNormal[0].Y;
sideMesh.Vertices[offset].Nz = 0f;
sideMesh.Vertices[offset + 1].Nx = vNormal[0].X;
sideMesh.Vertices[offset + 1].Ny = -vNormal[0].Y;
sideMesh.Vertices[offset + 1].Nz = 0f;
sideMesh.Vertices[offset + 2].Nx = vNormal[1].X;
sideMesh.Vertices[offset + 2].Ny = -vNormal[1].Y;
sideMesh.Vertices[offset + 2].Nz = 0f;
sideMesh.Vertices[offset + 3].Nx = vNormal[1].X;
sideMesh.Vertices[offset + 3].Ny = -vNormal[1].Y;
sideMesh.Vertices[offset + 3].Nz = 0f;
offset += 4;
}
// prepare index buffer for sides
var offset2 = 0;
sideMesh.Indices = new int[numVertices * 6];
for (var i = 0; i < numVertices; i++)
{
sideMesh.Indices[i * 6] = offset2;
sideMesh.Indices[i * 6 + 1] = offset2 + 1;
sideMesh.Indices[i * 6 + 2] = offset2 + 2;
sideMesh.Indices[i * 6 + 3] = offset2;
sideMesh.Indices[i * 6 + 4] = offset2 + 2;
sideMesh.Indices[i * 6 + 5] = offset2 + 3;
offset2 += 4;
}
return(sideMesh);
}
