/// <summary>
/// Creates the content to put into the command bar when the node is selected
/// </summary>
/// <param name="context">The current presentation context</param>
public override void CreateCommandContent(ICommandPresentationContext context)
{
base.CreateCommandContent(context);
// This will add an IsActive checkbox to the right rail
using (context.AddConfigurationPaneContent())
{
using (context.AddGroup(ConfigurationItemsGroup))
{
context.Add(IsActiveCommand, CheckBoxFactory.ForConfigurationPane);
using (context.AddGroup(SoundSelectionGroupCommand, ListBoxLayoutFactory.ForConfigurationPane))
{
context.Add(WoofCommand);
context.Add(MeowCommand);
context.Add(TweetCommand);
context.Add(SqueakCommand);
context.Add(MooCommand);
context.Add(CroakCommand);
context.Add(TootCommand);
context.Add(QuackCommand);
context.Add(BlubCommand);
context.Add(OwowowCommand);
context.Add(FoxCommand);
}
}
}
}
/// <summary>
/// Creates the content to put into the command bar when the node is selected
/// </summary>
/// <param name="context">The current presentation context</param>
public override void CreateCommandContent(ICommandPresentationContext context)
{
base.CreateCommandContent(context);
using (context.AddConfigurationPaneContent())
{
using (context.AddGroup(ConfigureGroup))
{
context.Add(MultiplierCommand);
}
}
// Create a new ribbon group and add a text block which allows the user to set
// the multiplier
//RibbonGroup group = new RibbonGroup() { Command = ConfigureGroup };
//RibbonTextBox box = new RibbonTextBox();
//box.Label = "Multiplier";
//var binding = new Binding("Multiplier");
//box.SetBinding(RibbonTextBox.TextProperty, binding);
//box.DataContext = this;
//group.AddItem(box);
//// Add the ribbon group to the presentation context
//context.Add(group);
}
/// <inheritdoc />
public override void CreateCommandContentForDocument(ICommandPresentationContext context, Document document)
{
base.CreateCommandContentForDocument(context, document);
using (context.AddDocumentToolBarContent())
{
using (context.AddGroup(ShellToolBar.LeftGroupCommand))
{
context.Add(RouteCommandsThroughTarget.RouteThroughDesigner(DebuggingCommands.Run, this), ShellToolBarButtonVisualFactory.NoMask);
}
}
}
/// <summary>
/// This method will create the custom ribbon content to represent the FanSpeed editor
/// </summary>
public override void CreateCommandContent(ICommandPresentationContext context)
{
base.CreateCommandContent(context);
using (context.AddConfigurationPaneContent())
{
using (context.AddGroup(MocCommonCommands.ControlDesignCommand))
{
context.Add(FanCommands.SetFanSpeedCommand);
}
}
}
/// <inheritdoc />
public override void CreateCommandContent(ICommandPresentationContext context)
{
base.CreateCommandContent(context);
using (context.AddConfigurationPaneContent())
{
using (context.AddGroup(WireGroupCommand))
{
context.Add(WireBeginsMutableVariableCommand);
}
}
}
/// <inheritdoc />
public override void CreateCommandContentForSelection(ICommandPresentationContext context)
{
base.CreateCommandContentForElement(context);
using (context.AddConfigurationPaneContent())
{
using (context.AddGroup(ConfigurationPaneCommands.VisualStyleGroupCommand))
{
context.Add(SelectionCommand);
}
}
}
/// <summary>
/// Creates the content to put into the command bar when the node is selected
/// </summary>
/// <param name="context">The current presentation context</param>
public override void CreateCommandContent(ICommandPresentationContext context)
{
base.CreateCommandContent(context);
using (context.AddConfigurationPaneContent())
{
using (context.AddGroup(ConfigureGroup))
{
context.Add(MultiplierCommand);
}
}
}
/// <inheritdoc />
public override void CreateCommandContent(ICommandPresentationContext context)
{
base.CreateCommandContent(context);
using (context.AddConfigurationPaneContent())
{
using (context.AddGroup(ConfigurationPaneCommands.BehaviorGroupCommand))
{
context.Add(LoopTunnelViewModelHelpers.LoopAddBorrowTunnelCommand.SetWeight(0.6));
context.Add(LoopTunnelViewModelHelpers.LoopAddIterateTunnelCommand.SetWeight(0.6));
}
}
}
/// <inheritdoc />
public override void CreateCommandContent(ICommandPresentationContext context)
{
base.CreateCommandContent(context);
using (context.AddConfigurationPaneContent())
{
using (context.AddGroup(BorrowModeGroupCommand))
{
context.Add(BorrowImmutableCommand);
context.Add(BorrowMutableCommand);
}
}
}
/// <summary>
/// Creates the content to put into the command bar when the node is selected
/// </summary>
/// <param name="context">The current presentation context</param>
public override void CreateCommandContent(ICommandPresentationContext context)
{
base.CreateCommandContent(context);
// This will add an IsActive checkbox to the right rail
using (context.AddConfigurationPaneContent())
{
using (context.AddGroup(ConfigurationItemsGroup))
{
context.Add(IsActiveCommand, CheckBoxFactory.ForConfigurationPane);
}
}
}
/// <inheritdoc />
public override void CreateCommandContent(ICommandPresentationContext context)
{
base.CreateCommandContent(context);
using (context.AddConfigurationPaneContent())
{
using (context.AddGroup(TypeModeGroupCommand))
{
context.Add(StructModeCommand);
context.Add(VariantModeCommand);
}
}
}
/// <inheritdoc />
protected override void CreateCommandContentForDocument(ICommandPresentationContext context)
{
base.CreateCommandContentForDocument(context);
using (context.AddStudioWindowToolBarContent())
{
using (context.AddGroup(ShellToolBar.LeftGroupCommand))
{
context.Add(DocumentCommands.Copy);
context.Add(DocumentCommands.Paste);
}
}
}
/// <summary>
/// Called to create the command content for this document. This content will be displayed in the "Home"
/// tab when this document is active
/// </summary>
/// <param name="context">The current presentation context</param>
protected override void CreateCommandContentForDocument(ICommandPresentationContext context)
{
base.CreateCommandContentForDocument(context);
// Add a group with cut, copy, and paste commands
using (context.AddConfigurationPaneContent())
{
using (context.AddGroup(EditingGroupCommand))
{
context.Add(PasteCommand);
context.Add(CutCommand);
context.Add(CopyCommand);
}
}
}
/// <summary>
/// Creates configuration pane content for this control. See comments on
/// <see cref="IProvideCommandContent"/> for more information about correct usage of this function.
/// </summary>
/// <param name="context">The current display context</param>
public override void CreateCommandContent(ICommandPresentationContext context)
{
base.CreateCommandContent(context);
// specify that we are adding things to the configuration pane
using (context.AddConfigurationPaneContent())
{
// First add the group command which lets us know what top level configuration pane group to put the child commands in
using (context.AddGroup(ConfigurationPaneCommands.BehaviorGroupCommand))
{
// add child commands whose visuals will show up in the specified parent group.
context.Add(FrequencyChannelBrowseCommand);
context.Add(DutyCycleChannelBrowseCommand);
}
}
}
/// <inheritdoc />
public override void CreateCommandContent(ICommandPresentationContext context)
{
base.CreateCommandContent(context);
using (context.AddConfigurationPaneContent())
{
using (context.AddGroup(ConfigurationPaneCommands.BehaviorGroupCommand))
{
context.Add(FlatSequenceTunnelViewModelHelpers.StructureAddBorrowTunnelCommand.SetWeight(0.6));
if (RebarFeatureToggles.IsCellDataTypeEnabled)
{
context.Add(FlatSequenceTunnelViewModelHelpers.StructureAddLockTunnelCommand.SetWeight(0.6));
}
context.Add(FlatSequenceTunnelViewModelHelpers.StructureAddUnwrapOptionTunnelCommand.SetWeight(0.6));
}
}
}
/// <inheritdoc />
public override void CreateApplicationContent(ICommandPresentationContext context)
{
base.CreateApplicationContent(context);
// Add to the tool launcher
using (context.AddToolLauncherContent())
{
// Add a group
using (context.AddGroup(CustomToolsWindowGroupCommand))
{
// Add the custom buttons tool window to the group
ICommandContentManager commandContentManager = ((CommandContentBuilder)context).Site.CommandContentManager;
context.Add(commandContentManager.GetCommandForWindow(CustomButtonsToolWindowType.WindowGuid));
}
}
}
/// <summary>
/// This is called to add content for an element when it is singularly selected.
/// </summary>
/// <param name="context">The current presentation context</param>
public override void CreateCommandContentForElement(ICommandPresentationContext context)
{
if (context.Selection != null && context.Selection.Any() && context.Selection.First().Model != null)
{
if (((Element)context.Selection.First().Model).SpecificKind == "NI.LabVIEW.VI:RandomNumber")
{
using (context.AddConfigurationPaneContent())
{
using (context.AddGroup(ExampleItemsGroup))
{
context.Add(MultiplyBy10Command, ButtonFactory.ForConfigurationPane);
}
}
}
}
// Don't forget to call the base
base.CreateCommandContentForElement(context);
}
/// <inheritdoc />
public override void CreateCommandContentForElement(ICommandPresentationContext context)
{
base.CreateCommandContentForElement(context);
// This entrypoint can be used to add commands for any selectable item in the UI.
// In this case, we own the ViewModel, so could do it in that class, but are showing
// here as an example and to keep these commands separate.
if (context.IsSingleSelect <PulseWidthModulationControlViewModel>())
{
using (context.AddConfigurationPaneContent())
{
// These are for the individual expandable sections...can make your own or use ours.
using (context.AddGroup(ConfigurationPaneCommands.BehaviorGroupCommand))
{
// Use a command with a UIType, or use/customize the factory yourself
context.Add(CheckBoxCommand);
////context.Add(CheckBoxCommand, CheckBoxFactory.ForConfigurationPane);
////context.Add(CheckBoxCommand, ToggleButtonFactory.ForConfigurationPane);
context.Add(TextBoxCommand);
var filters = new FileDialogFilterCollection();
filters.Add(new FileDialogFilter()
{
Extensions = new[] { "jpg", "png" }, Label = "Image Files"
});
context.Add(PathCommand, new PathSelectorFactory()
{
Filters = filters
});
////context.Add(TextBoxCommand, TextBoxFactory.ForConfigurationPane);
////context.Add(TextBoxCommand, StaticTextFactory.ForConfigurationPane);
context.Add(NumericCommand, new NumericTextBoxFactory(NITypes.Double));
context.Add(ColorCommand, new ColorBoxFactory {
ColorOnly = false, ShowMoreColors = true
});
context.AddContentFontEditor(null, true);
}
}
}
}
