private static void loadDXF(Stream content)
{
doc = new DXFDocument();
doc.Load(content);
// GetVectorDXF();
}
/// <summary>
/// Load and parse DXF code
/// </summary>
/// <param name="filename">String keeping file-name</param>
/// <returns></returns>
private static void GetVectorDXF(string filename)
{
DXFDocument doc = new DXFDocument();
doc.Load(filename);
gcodePenUp("DXF Start");
lastGCX = -1; lastGCY = -1; lastSetGCX = -1; lastSetGCY = -1;
foreach (DXFEntity dxfEntity in doc.Entities)
{
dxfBezierAccuracy = (int)Properties.Settings.Default.importSVGBezier;
gcodeReduce = Properties.Settings.Default.importSVGReduce;
gcodeReduceVal = (double)Properties.Settings.Default.importSVGReduceLimit;
gcodeZIncEnable = Properties.Settings.Default.importGCZIncEnable;
gcodeZIncrement = (double)Properties.Settings.Default.importGCZIncrement;
dxfPauseElement = Properties.Settings.Default.importSVGPauseElement;
dxfPausePenDown = Properties.Settings.Default.importSVGPausePenDown;
dxfComments = Properties.Settings.Default.importSVGAddComments;
if (dxfEntity.GetType() == typeof(DXFInsert))
{
DXFInsert ins = (DXFInsert)dxfEntity;
double ins_x = (double)ins.InsertionPoint.X;
double ins_y = (double)ins.InsertionPoint.Y;
foreach (DXFBlock block in doc.Blocks)
{
if (block.BlockName.ToString() == ins.BlockName)
{
if (dxfComments)
{
gcode.Comment(gcodeString[gcodeStringIndex], "Color: " + block.ColorNumber.ToString());
gcode.Comment(gcodeString[gcodeStringIndex], "Block: " + block.BlockName.ToString() + " at " + ins_x.ToString() + " " + ins_y.ToString());
}
foreach (DXFEntity blockEntity in block.Children)
{
processEntities(blockEntity, ins_x, ins_y);
}
if (dxfComments)
{
gcode.Comment(gcodeString[gcodeStringIndex], "Block: " + block.BlockName.ToString() + " end");
}
}
}
}
else
{
processEntities(dxfEntity);
}
}
if (askPenUp) // retrieve missing pen up
{
gcode.PenUp(gcodeString[gcodeStringIndex]); askPenUp = false;
}
}
private static bool loadDXF(Stream content)
{
doc = new DXFDocument();
try { doc.Load(content); }
catch (Exception er)
{ Logger.Error(er, "loading the file failed ");
MessageBox.Show("The file could not be opened - perhaps already open in other application?\r\n" + er.ToString());
return(false); }
return(true);
}
private static void loadDXF(string filename)
{
doc = new DXFDocument();
doc.Load(filename);
// GetVectorDXF();
Logger.Log.AddMsg2(Logger.LogType.Normal, doc.Blocks.Count.ToString(), "blockds");
Logger.Log.AddMsg2(Logger.LogType.Normal, doc.Entities.Count.ToString(), "Entities");
Logger.Log.AddMsg2(Logger.LogType.Normal, doc.Classes.Count.ToString(), "Classes");
Logger.Log.AddMsg2(Logger.LogType.Normal, doc.Header.ToString(), "Header");
Logger.Log.AddMsg2(Logger.LogType.Normal, doc.Tables.ToString(), "Tables");
}
public GcodeDocument FromDXF(DXFDocument document)
{
List <object> items = new List <object>();
// Need to get to the initial start point
// The class structure needs to store the full co-ordinates
// but only output the gcode with the differences
foreach (DXFEntity entity in document.Entities)
{
if (entity.GetType() == typeof(DXFLine))
{
DXFLine dxfLine = (DXFLine)entity;
Point from = new Point(dxfLine.Start.X.Value, dxfLine.Start.Y.Value, dxfLine.Start.Z.Value);
Point to = new Point(dxfLine.End.X.Value, dxfLine.End.Y.Value, dxfLine.End.Z.Value);
Line line = new Line(from, to);
items.Add(line);
}
}
GcodeDocument gcodeDocument = new GcodeDocument();
//foreach (DXFEntity entity in document.Entities)
//{
// if (entity.GetType() == typeof(DXFLine))
// {
// DXFLine dxfLine = (DXFLine)entity;
// GraphicPrimitives.Point from = new GraphicPrimitives.Point(dxfLine.Start.X.Value, dxfLine.Start.Y.Value, dxfLine.Start.Z.Value);
// GraphicPrimitives.Point to = new GraphicPrimitives.Point(dxfLine.End.X.Value, dxfLine.End.Y.Value, dxfLine.End.Z.Value);
// GraphicPrimitives.Line line = new GraphicPrimitives.Line(from, to);
// GcodeLibrary.LinearMove linearMove = new LinearMove(line);
// gcodeDocument.Add(linearMove);
// }
//}
return(gcodeDocument);
}
private static void loadDXF(string filename)
{
doc = new DXFDocument();
doc.Load(filename);
GetVectorDXF();
}
private List <GroupPoint> GetVectorDXF(string FileNAME)
{
textBoxInfo.Text = "";
DXFDocument doc = new DXFDocument();
doc.Load(FileNAME);
List <GroupPoint> ListLines;
List <cncPoint> ListPoint;
ListLines = new List <GroupPoint>();
int count_DXFLWPolyLine = 0;
int count_DXFPolyLine = 0;
int count_DXFLine = 0;
int count_DXFCircle = 0;
int count_DXFSpline = 0;
int count_DXFArc = 0;
double minX = 99999;
double maxX = -99999;
double deltaX = 0;
double minY = 99999;
double maxY = -99999;
double deltaY = 0;
foreach (DXFEntity VARIABLE in doc.Entities)
{
bool typeDetected = false;
if (VARIABLE.GetType() == typeof(DXFLWPolyLine))
{
typeDetected = true;
count_DXFLWPolyLine++;
DXFLWPolyLine lp = (DXFLWPolyLine)VARIABLE;
ListPoint = new List <cncPoint>();
foreach (DXFLWPolyLine.Element pl_e in lp.Elements)
{
ListPoint.Add(new cncPoint((double)pl_e.Vertex.X, (double)pl_e.Vertex.Y));
}
ListLines.Add(new GroupPoint(ListPoint));
ListPoint = new List <cncPoint>();
}
if (VARIABLE.GetType() == typeof(DXFPolyLine))
{
typeDetected = true;
count_DXFPolyLine++;
DXFPolyLine lp = (DXFPolyLine)VARIABLE;
ListPoint = new List <cncPoint>();
foreach (DXFVertex pl_e in lp.Children)
{
if (pl_e.GetType() == typeof(DXFVertex))
{
if (pl_e.Location.X != null && pl_e.Location.Y != null)
{
ListPoint.Add(new cncPoint((double)pl_e.Location.X, (double)pl_e.Location.Y));
}
}
}
ListLines.Add(new GroupPoint(ListPoint));
ListPoint = new List <cncPoint>();
}
if (VARIABLE.GetType() == typeof(DXFLine))
{
typeDetected = true;
count_DXFLine++;
DXFLine line = (DXFLine)VARIABLE;
ListPoint = new List <cncPoint>();
ListPoint.Add(new cncPoint((double)line.Start.X, (double)line.Start.Y));
ListPoint.Add(new cncPoint((double)line.End.X, (double)line.End.Y));
ListLines.Add(new GroupPoint(ListPoint));
ListPoint = new List <cncPoint>();
}
if (VARIABLE.GetType() == typeof(DXFSpline))
{
typeDetected = true;
count_DXFSpline++;
DXFSpline spline = (DXFSpline)VARIABLE;
ListPoint = new List <cncPoint>();
foreach (DXFPoint ppoint in spline.ControlPoints)
{
ListPoint.Add(new cncPoint((double)ppoint.X, (double)ppoint.Y));
}
ListLines.Add(new GroupPoint(ListPoint));
ListPoint = new List <cncPoint>();
}
if (VARIABLE.GetType() == typeof(DXFCircle))
{
typeDetected = true;
count_DXFCircle++;
DXFCircle circle = (DXFCircle)VARIABLE;
double X = (double)circle.Center.X;
double Y = (double)circle.Center.Y;
float R = (float)circle.Radius;
//тут определим необходимый угол
//и вычислим количество сегментов
double angle = GetAngleArcSegment((decimal)R, Settings.Default.page11arcMaxLengLine);
if (angle < 1)
{
angle = 1;
}
int segmentsCount = 360 / (int)angle;
ListPoint = new List <cncPoint>();
for (int i = 0; i < segmentsCount; i++)
{
float rx = R * (float)Math.Cos(2 * (float)Math.PI / segmentsCount * i);
float ry = R * (float)Math.Sin(2 * (float)Math.PI / segmentsCount * i);
ListPoint.Add(new cncPoint(X + (double)rx, Y + (double)ry));
}
ListPoint.Add(new cncPoint(ListPoint[0].X, ListPoint[0].Y));
ListLines.Add(new GroupPoint(ListPoint));
ListPoint = new List <cncPoint>();
//
//ListPoint.Add(new Location((decimal)line.Start.X, (decimal)line.Start.Y));
//ListPoint.Add(new Location((decimal)line.End.X, (decimal)line.End.Y));
//
}
if (VARIABLE.GetType() == typeof(DXFArc))
{
typeDetected = true;
count_DXFArc++;
DXFArc arc = (DXFArc)VARIABLE;
double X = (double)arc.Center.X;
double Y = (double)arc.Center.Y;
double R = arc.Radius;
double startAngle = arc.StartAngle;
double endAngle = arc.EndAngle;
if (startAngle > endAngle)
{
endAngle += 360;
}
//тут определим необходимый угол
//и вычислим количество сегментов
float StepAngle = (float)GetAngleArcSegment((decimal)R, Settings.Default.page11arcMaxLengLine);
ListPoint = new List <cncPoint>();
double currAngle = startAngle;
while (currAngle < endAngle)
{
double angle = currAngle * Math.PI / 180;
double rx = (double)(X + R * Math.Cos(angle));
double ry = (double)(Y + R * Math.Sin(angle));
ListPoint.Add(new cncPoint(rx, ry));
currAngle += StepAngle;
if (currAngle > endAngle)
{
//если перескочили конечный угол, то остановимся на конечном угле
double angle2 = endAngle * Math.PI / 180;
double rx2 = (double)(X + R * Math.Cos(angle2));
double ry2 = (double)(Y + R * Math.Sin(angle2));
ListPoint.Add(new cncPoint(rx2, ry2));
}
}
// int segmentsCount = 360 / (int)angle;
//for (float i = startAngle; i < endAngle; i+= (float)angle)
//{
//
//}
ListLines.Add(new GroupPoint(ListPoint));
ListPoint = new List <cncPoint>();
}
if (!typeDetected)
{
textBoxInfo.Text += "Не распознан тип данных: " + VARIABLE.GetType().ToString() +
Environment.NewLine;
}
}
//ListLines = new List<Segment>();
textBoxInfo.Text += @"Обработано DXFLWPolyLine: " + count_DXFLWPolyLine.ToString() + Environment.NewLine;
textBoxInfo.Text += @"Обработано DXFPolyLine: " + count_DXFPolyLine.ToString() + Environment.NewLine;
textBoxInfo.Text += @"Обработано DXFLine: " + count_DXFLine.ToString() + Environment.NewLine;
textBoxInfo.Text += @"Обработано DXFCircle: " + count_DXFCircle.ToString() + Environment.NewLine;
textBoxInfo.Text += @"Обработано DXFSpline: " + count_DXFSpline.ToString() + Environment.NewLine;
textBoxInfo.Text += @"Обработано DXFArc: " + count_DXFArc.ToString() + Environment.NewLine;
foreach (GroupPoint vSegment in ListLines)
{
foreach (cncPoint vLocation in vSegment.Points)
{
if (vLocation.X < minX)
{
minX = vLocation.X;
}
if (vLocation.Y < minY)
{
minY = vLocation.Y;
}
if (vLocation.X > maxX)
{
maxX = vLocation.X;
}
if (vLocation.Y > maxY)
{
maxY = vLocation.Y;
}
}
}
deltaX = maxX - minX;
deltaY = maxY - minY;
textBoxInfo.Text += @"Размер по X: " + deltaX.ToString() + Environment.NewLine;
textBoxInfo.Text += @"Размер по Y: " + deltaY.ToString() + Environment.NewLine;
return(ListLines);
}
public void Run(String[] args)
{
// Read in specific configuration
_logger.LogDebug("In Run()");
int pos = 0;
Parameter HPGL2Path = new Parameter("");
Parameter HPGL2Name = new Parameter("dxf.xml");
// Required for the plot
Parameter filename = new Parameter("");
Parameter filePath = new Parameter("");
Parameter outName = new Parameter("");
HPGL2Path.Value = System.Reflection.Assembly.GetExecutingAssembly().Location;
pos = HPGL2Path.Value.ToString().LastIndexOf('\\');
HPGL2Path.Value = HPGL2Path.Value.ToString().Substring(0, pos);
HPGL2Path.Source = Parameter.SourceType.App;
filePath.Value = Environment.CurrentDirectory;
filePath.Source = Parameter.SourceType.App;
try
{
RegistryKey key = Registry.LocalMachine;
key = key.OpenSubKey("software\\green\\dxf\\");
if (key != null)
{
if (key.GetValue("path", "").ToString().Length > 0)
{
HPGL2Path.Value = (string)key.GetValue("path", HPGL2Path);
HPGL2Path.Source = Parameter.SourceType.Registry;
_logger.LogDebug("Use registry value Path=" + HPGL2Path);
}
if (key.GetValue("name", "").ToString().Length > 0)
{
HPGL2Name.Value = (string)key.GetValue("name", HPGL2Name);
HPGL2Name.Source = Parameter.SourceType.Registry;
_logger.LogDebug("Use registry value Name=" + HPGL2Name);
}
}
}
catch (NullReferenceException)
{
_logger.LogError("Registry error use default values; Name=" + HPGL2Name.Value + " Path=" + HPGL2Path.Value);
}
catch (Exception e)
{
_logger.LogDebug(e.ToString());
}
// Check if the config file has been paased in and overwrite the registry
int items = args.Length;
for (int item = 0; item < items; item++)
{
{
switch (args[item])
{
case "/N":
case "--name":
{
HPGL2Name.Value = args[item + 1];
HPGL2Name.Value = HPGL2Name.Value.ToString().TrimStart('"');
HPGL2Name.Value = HPGL2Name.Value.ToString().TrimEnd('"');
HPGL2Name.Source = Parameter.SourceType.Command;
_logger.LogDebug("Use command value Name=" + HPGL2Name);
break;
}
case "/P":
case "--path":
{
HPGL2Path.Value = args[item + 1];
HPGL2Path.Value = HPGL2Path.Value.ToString().TrimStart('"');
HPGL2Path.Value = HPGL2Path.Value.ToString().TrimEnd('"');
HPGL2Path.Source = Parameter.SourceType.Command;
_logger.LogDebug("Use command value Path=" + HPGL2Path);
break;
}
}
}
}
_logger.LogInformation("Use HPGL2Name=" + HPGL2Name.Value + " HPGL2Path=" + HPGL2Path.Value);
// Read in configuration
_dxf = new DXFDocument();
//Serialise serialise = new Serialise(HPGL2Name.Value, HPGL2Path.Value, _logger);
//_dxf = serialise.FromXML();
//if (_dxf != null)
//{
//}
// Read in the plot specific parameters
string filenamePath = "";
string extension = "";
items = args.Length;
if (items == 1)
{
int index = 0;
filenamePath = args[index].Trim('"');
pos = filenamePath.LastIndexOf('.');
if (pos > 0)
{
extension = filenamePath.Substring(pos + 1, filenamePath.Length - pos - 1);
filenamePath = filenamePath.Substring(0, pos);
}
pos = filenamePath.LastIndexOf('\\');
if (pos > 0)
{
filePath.Value = filenamePath.Substring(0, pos);
filePath.Source = Parameter.SourceType.Command;
filename.Value = filenamePath.Substring(pos + 1, filenamePath.Length - pos - 1);
filename.Source = Parameter.SourceType.Command;
}
else
{
filename.Value = filenamePath;
filename.Source = Parameter.SourceType.Command;
}
_logger.LogInformation("Use filename=" + filename.Value);
_logger.LogInformation("Use filePath=" + filePath.Value);
}
else
{
for (int item = 0; item < items; item++)
{
{
switch (args[item])
{
case "/f":
case "--filename":
{
filename.Value = args[item + 1];
filename.Value = filename.Value.ToString().TrimStart('"');
filename.Value = filename.Value.ToString().TrimEnd('"');
filename.Source = Parameter.SourceType.Command;
pos = filename.Value.ToString().LastIndexOf('.');
if (pos > 0)
{
extension = filename.Value.ToString().Substring(pos + 1, filename.Value.ToString().Length - pos - 1);
filename.Value = filename.Value.ToString().Substring(0, pos);
}
_logger.LogDebug("Use command value Filename=" + filename);
break;
}
case "/O":
case "--output":
{
outName.Value = args[item + 1];
outName.Value = outName.Value.ToString().TrimStart('"');
outName.Value = outName.Value.ToString().TrimEnd('"');
outName.Source = Parameter.SourceType.Command;
_logger.LogDebug("Use command value Output=" + outName);
break;
}
case "/p":
case "--filepath":
{
filePath.Value = args[item + 1];
filePath.Value = filePath.Value.ToString().TrimStart('"');
filePath.Value = filePath.Value.ToString().TrimEnd('"');
filePath.Source = Parameter.SourceType.Command;
_logger.LogDebug("Use command value Filename=" + filePath);
break;
}
}
}
}
_logger.LogInformation("Use Filename=" + filename.Value);
_logger.LogInformation("Use Filepath=" + filePath.Value);
}
if (outName.Value.ToString().Length == 0)
{
outName.Value = filename.Value;
}
// Read the plot data and create the CNC file
_dxf.Load(filePath.Value.ToString(), filename.Value.ToString());
_logger.LogDebug("Out Run()");
}
public void TestMethod4()
{
DXFDocument doc = new DXFDocument();
doc.Load(new MemoryStream(Properties.Resources.Hase));
}
//[TestMethod]
public void TestMethod3()
{
DXFDocument doc = new DXFDocument();
doc.Load(new MemoryStream(Properties.Resources.Untitled_2));
}
//
// Sie können beim Schreiben der Tests folgende zusätzliche Attribute verwenden:
//
// Verwenden Sie ClassInitialize, um vor Ausführung des ersten Tests in der Klasse Code auszuführen.
// [ClassInitialize()]
// public static void MyClassInitialize(TestContext testContext) { }
//
// Verwenden Sie ClassCleanup, um nach Ausführung aller Tests in einer Klasse Code auszuführen.
// [ClassCleanup()]
// public static void MyClassCleanup() { }
//
// Mit TestInitialize können Sie vor jedem einzelnen Test Code ausführen.
// [TestInitialize()]
// public void MyTestInitialize() { }
//
// Mit TestCleanup können Sie nach jedem einzelnen Test Code ausführen.
// [TestCleanup()]
// public void MyTestCleanup() { }
//
#endregion
//[TestMethod]
public void TestMethod1()
{
DXFDocument doc = new DXFDocument();
doc.Load(new MemoryStream(Properties.Resources.LaptopStand));
}
