//public static IEdmObject5 GetObject(IEdmVault12 vault, int objectId, EdmObjectType objectType)
//{
// try
// {
// var obj = vault.GetObject(objectType, objectId);
// return obj;
// }
// catch (Exception e)
// {
// Console.WriteLine("Ошибка в процедуре public static IEdmObject5 GetObject {0}:", e);
// }
// foreach (EdmObjectType enumObjectType in Enum.GetValues(typeof(EdmObjectType)))
// {
// try
// {
// var obj = vault.GetObject(enumObjectType, objectId);
// return obj;
// }
// catch (Exception e)
// {
// Console.WriteLine("Ошибка в процедуре public static IEdmObject5 GetObject {0}:", e);
// }
// }
// //nothing found
// return null;
//}
static void CreateFlattPatternUpdateCutlist(string filePath, bool savedxf)
{
//var vault1 = new EdmVault5();
//IEdmFolder5 oFolder;
//vault1.LoginAuto("Vents-PDM", 0);
//var edmFile5 = vault1.GetFileFromPath("D:\\Vents-PDM\\Библиотека проектирования\\Templates\\flattpattern.drwdot", out oFolder);
//edmFile5.GetFileCopy(0, 0, oFolder.ID, (int)EdmGetFlag.EdmGet_Simple);
try
{
SwApp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
}
catch (Exception)
{
SwApp = new SldWorks { Visible = true };
}
if (SwApp == null) { return; }
var swModel = SwApp.OpenDoc6(filePath, (int)swDocumentTypes_e.swDocPART,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", 0, 0);
SwApp.SetUserPreferenceStringValue(((int)(swUserPreferenceStringValue_e.swFileLocationsDocumentTemplates)), "D:\\Vents-PDM\\Библиотека проектирования\\Templates\\");
try
{
if (!IsSheetMetalPart((IPartDoc)swModel))
{
SwApp.CloseDoc(swModel.GetTitle());
return;
}
}
catch (Exception)
{
return;
}
var activeconfiguration = (Configuration)swModel.GetActiveConfiguration();
var swModelConfNames = (string[])swModel.GetConfigurationNames();
foreach (var name in from name in swModelConfNames
let config = (Configuration)swModel.GetConfigurationByName(name)
where config.IsDerived()
select name)
{
swModel.DeleteConfiguration(name);
}
var swModelDocExt = swModel.Extension;
var swModelConfNames2 = (string[])swModel.GetConfigurationNames();
// Проход по всем родительским конфигурациям (т.е. - конфигурациям деталей)
var dataList = new List<DataToExport>();
foreach (var configName in from name in swModelConfNames2
let config = (Configuration)swModel.GetConfigurationByName(name)
where !config.IsDerived()
select name)
{
swModel.ShowConfiguration2(configName); swModel.EditRebuild3();
var confiData = new DataToExport { Config = configName };
var swDraw =
(DrawingDoc)SwApp.NewDrawing2((int)swDwgTemplates_e.swDwgTemplateA0size, "D:\\Vents-PDM\\Библиотека проектирования\\Templates\\flattpattern.drwdot",// "D:\\Vents-PDM\\Библиотека проектирования\\Templates\\flattpattern.drwdot",
(int)swDwgPaperSizes_e.swDwgPaperA0size, 0.841, 0.594);
swDraw.CreateFlatPatternViewFromModelView3(swModel.GetPathName(), configName, 0.841 / 2, 0.594 / 2, 0, true, true);
swModel.ForceRebuild3(false);
var swCustProp = swModelDocExt.CustomPropertyManager[configName];
string valOut;
string codMaterial;
swCustProp.Get4("Код материала", true, out valOut, out codMaterial);
confiData.КодМатериала = codMaterial;
string материал;
swCustProp.Get4("Материал", true, out valOut, out материал);
confiData.Материал = материал;
string обозначение;
swCustProp.Get4("Обозначение", true, out valOut, out обозначение);
confiData.Обозначение = обозначение;
var swCustPropForDescription = swModelDocExt.CustomPropertyManager[""];
string наименование;
swCustPropForDescription.Get4("Наименование", true, out valOut, out наименование);
confiData.Наименование = наименование;
if (savedxf)
{
var newDxf = (IModelDoc2)swDraw;
SwApp.CloseDoc(newDxf.GetPathName());
}
else
{
var newDxf = (IModelDoc2)swDraw;
SwApp.CloseDoc(newDxf.GetTitle());
}
//UpdateCustomPropertyListFromCutList
const string длинаГраничнойРамкиName = "Длина граничной рамки";
const string ширинаГраничнойРамкиName = "Ширина граничной рамки";
const string толщинаЛистовогоМеталлаNAme = "Толщина листового металла";
const string сгибыName = "Сгибы";
const string площадьПокрытияName = "Площадь покрытия";
Feature swFeat2 = swModel.FirstFeature();
while (swFeat2 != null)
{
if (swFeat2.GetTypeName2() == "SolidBodyFolder")
{
BodyFolder swBodyFolder = swFeat2.GetSpecificFeature2();
swFeat2.Select2(false, -1);
swBodyFolder.SetAutomaticCutList(true);
swBodyFolder.UpdateCutList();
Feature swSubFeat = swFeat2.GetFirstSubFeature();
while (swSubFeat != null)
{
if (swSubFeat.GetTypeName2() == "CutListFolder")
{
BodyFolder bodyFolder = swSubFeat.GetSpecificFeature2();
swSubFeat.Select2(false, -1);
bodyFolder.SetAutomaticCutList(true);
bodyFolder.UpdateCutList();
var swCustPrpMgr = swSubFeat.CustomPropertyManager;
swCustPrpMgr.Add("Площадь поверхности", "Текст", "\"SW-SurfaceArea@@@Элемент списка вырезов1@" + Path.GetFileName(swModel.GetPathName())+"\"");
string длинаГраничнойРамки;
swCustPrpMgr.Get4(длинаГраничнойРамкиName, true, out valOut, out длинаГраничнойРамки);
swCustProp.Set(длинаГраничнойРамкиName, длинаГраничнойРамки);
confiData.ДлинаГраничнойРамки = длинаГраничнойРамки;
string ширинаГраничнойРамки;
swCustPrpMgr.Get4(ширинаГраничнойРамкиName, true, out valOut, out ширинаГраничнойРамки);
swCustProp.Set(ширинаГраничнойРамкиName, ширинаГраничнойРамки);
confiData.ШиринаГраничнойРамки = ширинаГраничнойРамки;
string толщинаЛистовогоМеталла;
swCustPrpMgr.Get4(толщинаЛистовогоМеталлаNAme, true, out valOut, out толщинаЛистовогоМеталла);
swCustProp.Set(толщинаЛистовогоМеталлаNAme, толщинаЛистовогоМеталла);
confiData.ТолщинаЛистовогоМеталла = толщинаЛистовогоМеталла;
string сгибы;
swCustPrpMgr.Get4(сгибыName, true, out valOut, out сгибы);
swCustProp.Set(сгибыName, сгибы);
confiData.Сгибы = сгибы;
string площадьПоверхности;
swCustPrpMgr.Get4("Площадь поверхности", true, out valOut, out площадьПоверхности);
swCustProp.Set(площадьПокрытияName, площадьПоверхности);
confiData.ПлощадьПокрытия = площадьПоверхности;
}
swSubFeat = swSubFeat.GetNextFeature();
}
}
swFeat2 = swFeat2.GetNextFeature();
}
dataList.Add(confiData);
}
swModel.ShowConfiguration2(activeconfiguration.Name);
//GetXml(swModel);
ExportDataToXmlSql(swModel, dataList);
SwApp.CloseDoc(swModel.GetTitle());
}
/// <summary>
/// 出工程图
/// </summary>
/// <param name="dicValues"></param>
/// <param name="prtTemp"></param>
/// <param name="compTemp"></param>
/// <param name="bomPaths"></param>
/// <param name="savePaths">保存路径</param>
/// <param name="newPath">新路径</param>
private void Drawing(List <string> dicValues, string prtTemp, string compTemp, string bomPaths, string savePaths, string newPath)
{
string viewType = string.Empty;
bool isometric = false;
bool bom = false;
string dimesion = string.Empty;
double spaceX = 0.06; //x方向留白区域
double scale = 1; //定义比例初始值
List <double[]> viewBox = new List <double[]>(); //集合存放视图box
List <double[]> viewOrigin = new List <double[]>(); //集合存放视图原点值
double[] outLine = new double[4]; //视图box值
double[] postion = new double[2]; //视图原点值
_swApp = (SldWorks)ConnectSW.iSwApp; //连接sw
if (_swApp == null)
{
return;
}
foreach (string item in dicValues)
{
int errors = 0;
int warnings = 0;
double view1X = 0;
double view1Y = 0;
string filePath = item; //文件路径
string fileEx = filePath.Substring(filePath.LastIndexOf("."), 7); //获得后缀名
string filename = filePath.Substring(filePath.LastIndexOf("\\") + 1, filePath.LastIndexOf(".") - filePath.LastIndexOf("\\") - 1);
if (fileEx == ".SLDPRT")
{
_swModelDoc = (ModelDoc2)_swApp.OpenDoc6(filePath, (int)swDocumentTypes_e.swDocPART, (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings);
__swDrawDoc = (DrawingDoc)_swApp.NewDrawing2((int)swDwgTemplates_e.swDwgTemplateCustom, prtTemp, (int)swDwgPaperSizes_e.swDwgPapersUserDefined, 0, 0);
}
if (fileEx == ".SLDASM")
{
_swModelDoc = (ModelDoc2)_swApp.OpenDoc6(filePath, (int)swDocumentTypes_e.swDocASSEMBLY, (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings);
__swDrawDoc = (DrawingDoc)_swApp.NewDrawing2((int)swDwgTemplates_e.swDwgTemplateCustom, compTemp, (int)swDwgPaperSizes_e.swDwgPapersUserDefined, 0, 0);
}
_swModelEx = (ModelDocExtension)_swModelDoc.Extension;
if (newPath != null)
{
savePaths = newPath.Substring(0, newPath.LastIndexOf("\\"));
}
//新建工程图
_swApp.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swAutomaticScaling3ViewDrawings, true); //自动缩放新工程图比例
if (standarView == false && isometric) //如果只生成等轴测视图
{
CreatIsometric(__swDrawDoc, filePath);
_currentSheet = (Sheet)__swDrawDoc.GetCurrentSheet();
__swDrawDoc.ActivateSheet(_currentSheet.GetName());
_swView = __swDrawDoc.GetFirstView();
_swView = _swView.GetNextView();
ChangeViewShow(tag, _swView);
_swApp.CloseDoc(_swModelDoc.GetTitle());//
ModelDoc2 tempDoc = (ModelDoc2)__swDrawDoc;
bool ss0 = false;
if (newPath != null && IfDwg)
{
ss0 = tempDoc.Extension.SaveAs(newPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else if (newPath != null && IfDwg == false)
{
ss0 = tempDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()).Substring(0, (_swModelDoc.GetTitle()).LastIndexOf(".")) + ".DWG", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else if (newPath == null && IfDwg)
{
ss0 = tempDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()).Substring(0, (_swModelDoc.GetTitle()).LastIndexOf(".")) + ".DWG", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else
{
ss0 = tempDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()).Substring(0, (_swModelDoc.GetTitle()).LastIndexOf(".")) + ".slddrw", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
bool isHidden = tempDoc.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swViewDisplayHideAllTypes, true); //隐藏所有类型
_swApp.CloseDoc(tempDoc.GetTitle());
_numSucess += 1; //转换成功的数量
sucessFile.Add(filePath);
return;
}
bool isCreate = false;
#region 第三视角投影
if (thirProject)
{
isCreate = __swDrawDoc.Create3rdAngleViews2(filePath);//创建第三视角投影视图(视图位置有差别)
//调整视图位置
_swView = __swDrawDoc.GetFirstView();
while (_swView != null)
{
double[] vBox = new double[] { };
double[] vPoint = new double[] { };
vBox = (double[])_swView.GetOutline();
vPoint = (double[])_swView.Position;
viewBox.Add(vBox);
viewOrigin.Add(vPoint);
_swView = _swView.GetNextView();
}
//调整视图1、2位置
if (viewBox[0][3] > viewBox[0][2])//纵向
{
double[] posView1 = new double[] { viewBox[0][2] / 3.0, viewOrigin[1][1] };
_swView = __swDrawDoc.GetFirstView();
_swView = _swView.GetNextView();
_swView.Position = posView1;
double[] posView2 = new double[] { viewOrigin[2][0], viewOrigin[2][1] - (viewBox[2][1] - viewBox[1][3]) / 1.9 };//调整视图2位置
_swView = _swView.GetNextView();
_swView.Position = posView2;
}
else
{
double[] posView1 = new double[] { viewBox[0][2] / 4.0, viewOrigin[1][1] };
_swView = __swDrawDoc.GetFirstView();
_swView = _swView.GetNextView();
_swView.Position = posView1;
double[] posView2 = new double[] { viewOrigin[2][0], viewOrigin[2][1] - (viewBox[2][1] - viewBox[1][3]) / 2.0 };//调整视图2位置
_swView = _swView.GetNextView();
_swView.Position = posView2;
}
viewOrigin.Clear();
viewBox.Clear();
_swView = __swDrawDoc.GetFirstView();
while (_swView != null)
{
double[] vBox = new double[] { };
double[] vPoint = new double[] { };
vBox = (double[])_swView.GetOutline();
vPoint = (double[])_swView.Position;
viewBox.Add(vBox);
viewOrigin.Add(vPoint);
_swView = _swView.GetNextView();
}
if (isometric)//等轴测
{
_swView = (IView)__swDrawDoc.CreateDrawViewFromModelView3(filePath, "*等轴测", viewOrigin[3][0], viewOrigin[2][1], 0);
_swView = __swDrawDoc.GetFirstView();
double[] sca = new double[2];
sca = _swView.ScaleRatio;//获取比例
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
_swView.ScaleRatio = sca;
double[] rePos = new double[] { viewOrigin[3][0] + 0.015, viewOrigin[2][1] };
_swView.Position = rePos;
ChangeViewShow(tag, _swView); //视图样式
AddDimension(dimesion, __swDrawDoc, _swModelDoc); //尺寸标注
}
}
#endregion
#region 第一视角投影
else
{
isCreate = __swDrawDoc.Create1stAngleViews(filePath);//创建第一视角投影视图
//获取视图boundingbox
_swView = __swDrawDoc.GetFirstView();
while ((_swView != null))
{
outLine = (double[])_swView.GetOutline(); //(x,y坐标最值)
postion = (double[])_swView.Position; //视图位置值
viewBox.Add(outLine);
viewOrigin.Add(postion);
_swView = _swView.GetNextView();
}
double newScale = CalcuScale(viewBox, __swDrawDoc, scale, spaceX, 3);
//调整视图位置（position）
if (viewBox[0][3] > viewBox[0][2])
{
view1X = viewBox[0][2] / 2.8; //视图1的X坐标放在图纸坐标的三分之一处
view1Y = viewBox[0][3] - viewBox[0][3] / 4.85; //视图1的Y坐标放在图纸坐标的五分之一处
}
else
{
view1X = viewBox[0][2] / 3.5; //视图1的X坐标放在图纸坐标的三分之一处
view1Y = viewBox[0][3] - viewBox[0][3] / 4.0; //视图1的Y坐标放在图纸坐标的四分之一处
}
double[] view1Pos = new double[] { view1X, view1Y };
_swView = __swDrawDoc.GetFirstView(); //获取图纸
_swView = _swView.GetNextView(); //获取第一个视图
_swView.Position = view1Pos;
bool isRebuild = _swModelDoc.EditRebuild3();
//viewBox.Clear();
List <double[]> tempBox = new List <double[]>();
viewOrigin.Clear();
while ((_swView != null))
{
ChangeViewShow(tag, _swView); //改变视图显示样式
AddDimension(dimesion, __swDrawDoc, _swModelDoc); //添加尺寸
outLine = (double[])_swView.GetOutline(); //(x,y坐标最值)
postion = (double[])_swView.Position; //视图位置值
tempBox.Add(outLine);
viewOrigin.Add(postion);
_swView = _swView.GetNextView();
}
if (isometric) //是否创建等轴测视图（非钣金）
{
double[] scalArry = new double[2];
_swView = (IView)__swDrawDoc.CreateDrawViewFromModelView3(filePath, "*等轴测", viewOrigin[2][0], viewOrigin[1][1], 0);
_swView = __swDrawDoc.GetFirstView(); //获取图纸
_swView = _swView.GetNextView(); //获取第一个视图
double sca = _swView.get_IScaleRatio();
if (sca == 1) //缩小比例
{
scalArry[0] = 1;
scalArry[1] = newScale;
}
else
{
scalArry[0] = sca;
scalArry[1] = 1;
}
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
_swView.ScaleRatio = scalArry;//调整轴测图比例
ChangeViewShow(tag, _swView);
_swModelDoc.EditRebuild3();
}
////关掉文件（不保存）
//_swApp.CloseDoc(_swModelDoc.GetTitle());
if (fileEx == ".SLDASM" && bom) //是否创建明细表
{
//viewBox.Clear();
//viewOrigin.Clear();
double[] outArry = new double[4];
double[] posArry = new double[2];
double[] posArry1 = null;
double[] posArry2 = null;
double[] posArry3 = null;
_currentSheet = (Sheet)__swDrawDoc.GetCurrentSheet();
__swDrawDoc.ActivateSheet(_currentSheet.GetName());
_swView = __swDrawDoc.GetFirstView(); //获取图纸
_swView = _swView.GetNextView(); //获取第一个视图
swBomTableAnno = (BomTableAnnotation)_swView.InsertBomTable4(true, 0.4, 0.1, (int)swBOMConfigurationAnchorType_e.swBOMConfigurationAnchor_BottomRight, (int)swBomType_e.swBomType_TopLevelOnly, "", bomPaths, false, 0, false);
TableAnnotation tableAnnotation = (TableAnnotation)swBomTableAnno;
tableAnnotation.GetAnnotation();
BomFeature bomFeature = swBomTableAnno.BomFeature;
bool[] array = new bool[bomFeature.GetConfigurationCount(false)];
object Visible = array;
object configurations = bomFeature.GetConfigurations(false, ref Visible);
array[0] = true;
bomFeature.SetConfigurations(true, array, configurations);
FeatureManager featureManager = _swModelDoc.FeatureManager;
featureManager.UpdateFeatureTree();
double num = 0.007;
tableAnnotation.SetRowHeight(-2, num, 0);
double totleHeight = num * tableAnnotation.RowCount; //计算总的tableBom高度
double heightSum = totleHeight + 0.070; //加上标题栏总高度
int columCount = tableAnnotation.ColumnCount; //获取总的列数
double columWidth = 0;
for (int i = 0; i < columCount; i++)
{
double wid = tableAnnotation.GetColumnWidth(i);
columWidth += wid;
}
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
outArry = (double[])_swView.GetOutline();
if (outArry[1] < heightSum)//有可能被遮挡
{
//__swView = _swDrawDoc.GetFirstView();
//double[] tempArry = new double[] { };
//tempArry=(double[])__swView.GetOutline();
//viewBox.Insert(0, tempArry);
scale = ((viewBox[1][2] - viewBox[1][0]) + (viewBox[3][2] - viewBox[3][0])) / (viewBox[0][2] - columWidth - 0.025);//计算X方向的比例
if (scale > 11)
{
double scaleCeil = System.Math.Ceiling(scale);
if (scaleCeil > 11 && scaleCeil < 16)
{
scale = 20;
}
if (scaleCeil > 15 && scaleCeil < 21)
{
scale = 25;
}
if (scaleCeil > 20 && scaleCeil < 26)
{
scale = 30;
}
if (scaleCeil > 25 && scaleCeil < 34)
{
scale = 40;
}
if (scaleCeil > 33 && scaleCeil < 45)
{
scale = 50;
}
if (scaleCeil > 44 && scaleCeil < 55)
{
scale = 60;
}
}
else if (scale > 5.8 && scale < 10.5)
{
double scaleCeil = System.Math.Ceiling(scale);
//scale = scaleCeil + 4.0; //比例为10、11、12、13、14、15
if (scaleCeil > 5 && scaleCeil < 8)
{
scale = 10;
}
if (scaleCeil > 7 && scaleCeil < 12)
{
scale = 15;
}
}
_currentSheet = (Sheet)__swDrawDoc.GetCurrentSheet();
__swDrawDoc.ActivateSheet(_currentSheet.GetName());
bool isScale = _currentSheet.SetScale(1, scale, false, false); //设置视图和图纸比例
_swView = __swDrawDoc.GetFirstView();
_swView = _swView.GetNextView(); //获取视图1
double[] pos1 = new double[2];
pos1 = _swView.Position;
posArry1 = new double[] { pos1[0] - columWidth / 3.45, pos1[1] };
_swView.Position = posArry1; //重置视图1的位置
_swView = _swView.GetNextView(); //获取视图2
double[] pos2 = new double[2];
pos2 = _swView.Position;
posArry2 = new double[] { pos2[0] - columWidth / 3.45, pos2[1] + 0.0015 };
_swView.Position = posArry2; //设置视图2位置
_swView = _swView.GetNextView(); //获取视图三
posArry = (double[])_swView.Position;
posArry3 = new double[] { posArry[0] - columWidth / 3.5, posArry[1] };
_swView.Position = posArry3;//视图3坐标
}
}
}//第一视角投影
#endregion
if (isCreate)
{
_numSucess += 1;//转换成功的数量
sucessFile.Add(filePath);
}
ModelDoc2 tempModelDoc = (ModelDoc2)__swDrawDoc; //获取到swDraw的父级（ModelDoc）
_swApp.CloseDoc(_swModelDoc.GetTitle());
bool isHiden = tempModelDoc.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swViewDisplayHideAllTypes, true); //隐藏所有类型
_swModelDoc.ForceRebuild3(false);
string saveName = (_swModelDoc.GetTitle()).Substring(0, (_swModelDoc.GetTitle()).LastIndexOf("."));
bool ss;
if (newPath != null && IfDwg)
{
ss = tempModelDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()) + ".DWG", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else if (newPath != null && IfDwg == false)
{
ss = tempModelDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()) + ".slddrw", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else if (newPath == null && IfDwg)
{
ss = tempModelDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()) + ".DWG", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else
{
ss = tempModelDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()) + ".slddrw", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
_swApp.CloseDoc(tempModelDoc.GetTitle());//关闭转换完成的文件
}
}
//public static IEdmObject5 GetObject(IEdmVault12 vault, int objectId, EdmObjectType objectType)
//{
// try
// {
// var obj = vault.GetObject(objectType, objectId);
// return obj;
// }
// catch (Exception e)
// {
// Console.WriteLine("Ошибка в процедуре public static IEdmObject5 GetObject {0}:", e);
// }
// foreach (EdmObjectType enumObjectType in Enum.GetValues(typeof(EdmObjectType)))
// {
// try
// {
// var obj = vault.GetObject(enumObjectType, objectId);
// return obj;
// }
// catch (Exception e)
// {
// Console.WriteLine("Ошибка в процедуре public static IEdmObject5 GetObject {0}:", e);
// }
// }
// //nothing found
// return null;
//}
static void CreateFlattPatternUpdateCutlist(string filePath, bool savedxf)
{
//var vault1 = new EdmVault5();
//IEdmFolder5 oFolder;
//vault1.LoginAuto("Vents-PDM", 0);
//var edmFile5 = vault1.GetFileFromPath("D:\\Vents-PDM\\Библиотека проектирования\\Templates\\flattpattern.drwdot", out oFolder);
//edmFile5.GetFileCopy(0, 0, oFolder.ID, (int)EdmGetFlag.EdmGet_Simple);
try
{
SwApp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
}
catch (Exception)
{
SwApp = new SldWorks {
Visible = true
};
}
if (SwApp == null)
{
return;
}
var swModel = SwApp.OpenDoc6(filePath, (int)swDocumentTypes_e.swDocPART,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", 0, 0);
SwApp.SetUserPreferenceStringValue(((int)(swUserPreferenceStringValue_e.swFileLocationsDocumentTemplates)), "D:\\Vents-PDM\\Библиотека проектирования\\Templates\\");
try
{
if (!IsSheetMetalPart((IPartDoc)swModel))
{
SwApp.CloseDoc(swModel.GetTitle());
return;
}
}
catch (Exception)
{
return;
}
var activeconfiguration = (Configuration)swModel.GetActiveConfiguration();
var swModelConfNames = (string[])swModel.GetConfigurationNames();
foreach (var name in from name in swModelConfNames
let config = (Configuration)swModel.GetConfigurationByName(name)
where config.IsDerived()
select name)
{
swModel.DeleteConfiguration(name);
}
var swModelDocExt = swModel.Extension;
var swModelConfNames2 = (string[])swModel.GetConfigurationNames();
// Проход по всем родительским конфигурациям (т.е. - конфигурациям деталей)
var dataList = new List <DataToExport>();
foreach (var configName in from name in swModelConfNames2
let config = (Configuration)swModel.GetConfigurationByName(name)
where !config.IsDerived()
select name)
{
swModel.ShowConfiguration2(configName); swModel.EditRebuild3();
var confiData = new DataToExport {
Config = configName
};
var swDraw =
(DrawingDoc)SwApp.NewDrawing2((int)swDwgTemplates_e.swDwgTemplateA0size, "D:\\Vents-PDM\\Библиотека проектирования\\Templates\\flattpattern.drwdot",// "D:\\Vents-PDM\\Библиотека проектирования\\Templates\\flattpattern.drwdot",
(int)swDwgPaperSizes_e.swDwgPaperA0size, 0.841, 0.594);
swDraw.CreateFlatPatternViewFromModelView3(swModel.GetPathName(), configName, 0.841 / 2, 0.594 / 2, 0, true, true);
swModel.ForceRebuild3(false);
var swCustProp = swModelDocExt.CustomPropertyManager[configName];
string valOut;
string codMaterial;
swCustProp.Get4("Код материала", true, out valOut, out codMaterial);
confiData.КодМатериала = codMaterial;
string материал;
swCustProp.Get4("Материал", true, out valOut, out материал);
confiData.Материал = материал;
string обозначение;
swCustProp.Get4("Обозначение", true, out valOut, out обозначение);
confiData.Обозначение = обозначение;
var swCustPropForDescription = swModelDocExt.CustomPropertyManager[""];
string наименование;
swCustPropForDescription.Get4("Наименование", true, out valOut, out наименование);
confiData.Наименование = наименование;
if (savedxf)
{
var newDxf = (IModelDoc2)swDraw;
SwApp.CloseDoc(newDxf.GetPathName());
}
else
{
var newDxf = (IModelDoc2)swDraw;
SwApp.CloseDoc(newDxf.GetTitle());
}
//UpdateCustomPropertyListFromCutList
const string длинаГраничнойРамкиName = "Длина граничной рамки";
const string ширинаГраничнойРамкиName = "Ширина граничной рамки";
const string толщинаЛистовогоМеталлаNAme = "Толщина листового металла";
const string сгибыName = "Сгибы";
const string площадьПокрытияName = "Площадь покрытия";
Feature swFeat2 = swModel.FirstFeature();
while (swFeat2 != null)
{
if (swFeat2.GetTypeName2() == "SolidBodyFolder")
{
BodyFolder swBodyFolder = swFeat2.GetSpecificFeature2();
swFeat2.Select2(false, -1);
swBodyFolder.SetAutomaticCutList(true);
swBodyFolder.UpdateCutList();
Feature swSubFeat = swFeat2.GetFirstSubFeature();
while (swSubFeat != null)
{
if (swSubFeat.GetTypeName2() == "CutListFolder")
{
BodyFolder bodyFolder = swSubFeat.GetSpecificFeature2();
swSubFeat.Select2(false, -1);
bodyFolder.SetAutomaticCutList(true);
bodyFolder.UpdateCutList();
var swCustPrpMgr = swSubFeat.CustomPropertyManager;
swCustPrpMgr.Add("Площадь поверхности", "Текст", "\"SW-SurfaceArea@@@Элемент списка вырезов1@" + Path.GetFileName(swModel.GetPathName()) + "\"");
string длинаГраничнойРамки;
swCustPrpMgr.Get4(длинаГраничнойРамкиName, true, out valOut, out длинаГраничнойРамки);
swCustProp.Set(длинаГраничнойРамкиName, длинаГраничнойРамки);
confiData.ДлинаГраничнойРамки = длинаГраничнойРамки;
string ширинаГраничнойРамки;
swCustPrpMgr.Get4(ширинаГраничнойРамкиName, true, out valOut, out ширинаГраничнойРамки);
swCustProp.Set(ширинаГраничнойРамкиName, ширинаГраничнойРамки);
confiData.ШиринаГраничнойРамки = ширинаГраничнойРамки;
string толщинаЛистовогоМеталла;
swCustPrpMgr.Get4(толщинаЛистовогоМеталлаNAme, true, out valOut, out толщинаЛистовогоМеталла);
swCustProp.Set(толщинаЛистовогоМеталлаNAme, толщинаЛистовогоМеталла);
confiData.ТолщинаЛистовогоМеталла = толщинаЛистовогоМеталла;
string сгибы;
swCustPrpMgr.Get4(сгибыName, true, out valOut, out сгибы);
swCustProp.Set(сгибыName, сгибы);
confiData.Сгибы = сгибы;
string площадьПоверхности;
swCustPrpMgr.Get4("Площадь поверхности", true, out valOut, out площадьПоверхности);
swCustProp.Set(площадьПокрытияName, площадьПоверхности);
confiData.ПлощадьПокрытия = площадьПоверхности;
}
swSubFeat = swSubFeat.GetNextFeature();
}
}
swFeat2 = swFeat2.GetNextFeature();
}
dataList.Add(confiData);
}
swModel.ShowConfiguration2(activeconfiguration.Name);
//GetXml(swModel);
ExportDataToXmlSql(swModel, dataList);
SwApp.CloseDoc(swModel.GetTitle());
}
