public static void NewDoc(SldWorks iswApp)
{
ModelDoc2 PartDoc = iswApp.NewDocument(AppDomain.CurrentDomain.BaseDirectory + @"SwFile\PartTemplate.PRTDOT", (int)swDwgPaperSizes_e.swDwgPaperA0size, 10, 10);
ModelDoc2 AssemDoc = iswApp.NewDocument(AppDomain.CurrentDomain.BaseDirectory + @"SwFile\AssemTemplate.ASMDOT", (int)swDwgPaperSizes_e.swDwgPaperA0size, 10, 10);
ModelDoc2 DrawDoc = iswApp.NewDocument(AppDomain.CurrentDomain.BaseDirectory + @"SwFile\DrawingTemplate.DRWDOT", (int)swDwgPaperSizes_e.swDwgPaperA0size, 10, 10);
StringBuilder Sb = new StringBuilder();
if (PartDoc != null)
{
Sb.Append("零件新建成功" + PartDoc.GetTitle() + "\r\n");
}
else
{
Sb.Append("零件新建失败！" + "\r\n");
}
if (AssemDoc != null)
{
Sb.Append("装配体新建成功" + AssemDoc.GetTitle() + "\r\n");
}
else
{
Sb.Append("装配体新建失败！" + "\r\n");
}
if (DrawDoc != null)
{
Sb.Append("图纸新建成功" + DrawDoc.GetTitle() + "\r\n");
}
else
{
Sb.Append("图纸新建失败！" + "\r\n");
}
MessageBox.Show(Sb.ToString().Trim());
}
// DOCUMENT
void NewPart()
{
sw.NewDocument(@"C:\ProgramData\SOLIDWORKS\SOLIDWORKS 2016\templates\Деталь.prtdot", 0, 0, 0);
sw.ActivateDoc("");
Model = sw.ActiveDoc;
Model.SaveAs3(ApplicationPath + "temp_part" + ".SLDPRT", 0, 0);
PlaneTop(0); name("Y");
PlaneRight(0); name("X");
PlaneFront(0); name("Z");
}
private void createPart()
{
swDoc = null;
int longstatus = 0;
swDoc = ((ModelDoc2)(sldApp.NewDocument("C:\\ProgramData\\SOLIDWORKS\\SOLIDWORKS 2016\\templates\\Part.prtdot", 0, 0, 0)));
sldApp.ActivateDoc2("Part2", false, ref longstatus);
swDoc = ((ModelDoc2)(sldApp.ActiveDoc));
ModelView myModeview = null;
myModeview = ((ModelView)(swDoc.ActiveView));
myModeview.FrameState = ((int)(swWindowState_e.swWindowMaximized));
}
protected int _save()
{
ModelDoc2 swDoc;
int errors = 0;
int warnings = 0;
swDoc = ((ModelDoc2)(swApp.NewDocument(template, 0, 0, 0)));
CustomPropertyManager swCustProp = swDoc.Extension.get_CustomPropertyManager("");
swCustProp.Set(Settings.Default.propertyName, name);
swDoc.Extension.SaveAs(Path.Combine(project.workDir, file), (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
swApp.OnIdleNotify -= new DSldWorksEvents_OnIdleNotifyEventHandler(_save);
updateDBForm();
return(0);
}
public static void NewPartTemplate() // Yeni bir part dökümanı açan metodum
{
SldWorks SldWorks = new SldWorks();
ModelDoc2 swModel;
swModel = (ModelDoc2)SldWorks.NewDocument("C:\\ProgramData\\SOLIDWORKS\\SOLIDWORKS 2019\\templates\\Parça.prtdot", 0, 0, 0);
}
public static void createSWDrawing(bool createDrawBool)
{
swApp = SolidWorksSingleton.swApp;
string pthTemplateFolder = GUI.pthProjFolder + "\\" + "Ξ_SolidWorks Standard Library" + "\\" + "Templates" + "\\" + "RTPi DRW.DRWDOT";
pthPartAssytoOpen = GUI.pthProjFolder + "\\" + GUI.GUIProj + "\\" + GUI.PartAssySolidWorkstoOpen;
//if drawing exist open it, otherwise create the drawing.
if (createDrawBool == false)
{
swApp.OpenDoc6(GUI.pthDrwtoOpen, 3, 256, "", 0, 0);
}
else
{
//create a drawing
swModel = (ModelDoc2)swApp.NewDocument(pthTemplateFolder, 0, 0, 0);
//activate drawing
swDraw = (DrawingDoc)swModel;
createPartNumber(3);
//save the part under a specific number
swModel.SaveAs(saveName);
}
}
private DrawingDoc CreateDrawing()
{
return(sldWorks.NewDocument(
DrawingTemplatePath,
(int)swDwgPaperSizes_e.swDwgPaperDsize,
1,
1) as DrawingDoc);
}
public void CreatePart()
{
string guild = Guid.NewGuid().ToString();
string root = @"C:\Users\timos\source\Project\Solution\Project\VenturiPart\" + guild;
if (!Directory.Exists(root))
{
Directory.CreateDirectory(root);
}
else
{
throw new ArgumentException("Чертеж уже существует.");
}
swApp = GetSolidWorks.GetApplication();
defaultPartTemplate = swApp.GetUserPreferenceStringValue((int)swUserPreferenceStringValue_e.swDefaultTemplatePart);
swApp.NewDocument(defaultPartTemplate, 0, 0, 0);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.Extension.SelectByID2("Front Plane", "PLANE", 0, 0, 0, false, 0, null, 0);
swModel.SketchManager.InsertSketch(true);
swModel.ClearSelection2(true);
swModel.SketchManager.CreateCenterLine(0.000000, 0.000000, 0.000000, -0.173611, 0.000000, 0.000000);
swModel.SketchManager.CreateLine(0.000000, -0.026016, 0.000000, -0.039342, -0.026016, 0.000000);
swModel.SketchManager.CreateLine(-0.039342, -0.026016, 0.000000, -0.075130, -0.007488, 0.000000);
swModel.SketchManager.CreateLine(-0.075130, -0.007488, 0.000000, -0.092897, -0.007488, 0.000000);
swModel.SketchManager.CreateLine(-0.092897, -0.007488, 0.000000, -0.173611, -0.026016, 0.000000);
swModel.ClearSelection2(true);
swModel.Extension.SelectByID2("Point8", "SKETCHPOINT", -0.17361079172679997, -0.026016237064323086, 0, false, 0, null, 0);
swModel.Extension.SelectByID2("Point2", "SKETCHPOINT", -0.17361079172679997, 0, 0, true, 0, null, 0);
swModel.SketchAddConstraints("sgVERTICALPOINTS2D");
swModel.Extension.SelectByID2("Point4", "SKETCHPOINT", 0, -0.026016237064323086, 0, false, 0, null, 0);
swModel.Extension.SelectByID2("Point1", "SKETCHPOINT", 0, 0, 0, true, 0, null, 0);
swModel.SketchAddConstraints("sgVERTICALPOINTS2D");
swModel.Extension.SelectByID2("Point4", "SKETCHPOINT", 0, -0.026016237064323086, 0, false, 0, null, 0);
swModel.Extension.SelectByID2("Point1", "SKETCHPOINT", 0, 0, 0, true, 0, null, 0);
swModel.ClearSelection2(true);
swModel.FeatureManager.FeatureRevolve2(true, true, true, false, false, false, 0, 0, 6.2831853071796004, 0, false, false, 0.01, 0.01, 0, 0.005, 0.01, true, true, true);
swModel.ISelectionManager.EnableContourSelection = false;
swModel.ViewZoomtofit2();
swModel.ForceRebuild3(true);
swModel.SaveAs(PartName + ".SPLDRT");
swApp = null;
}
public void SldConnect()
{
try
{
System.Diagnostics.Process[] sw = System.Diagnostics.Process.GetProcessesByName("SLDWORKS");
object processSw = null;
if (sw.Length > 1) // kill if more then one copy of sw app is runned
{
foreach (System.Diagnostics.Process sw_close in sw)
{
sw_close.CloseMainWindow();
sw_close.Kill();
}
}
else
{
processSw = System.Activator.CreateInstance(System.Type.GetTypeFromProgID("SldWorks.Application"));
// create or get access to the existace proccess
if (processSw == null)
{
MessageBox.Show(@"Looks like You haven't any installed copy of Solidworks yet");
}
}
SwApp = (SldWorks)processSw;
if (SwApp == null)
{
return;
}
SwApp.Visible = true;
SwApp.UserControl = true;
////
SwApp.INewPart();
SwModel = (ModelDoc2)SwApp.NewDocument(Application.StartupPath + @"tamplate.prtdot", 100, 0, 0);
SwModel = SwApp.IActiveDoc2;
}
catch (Exception)
{
MessageBox.Show(@"Can't connect to SolidWorks");
}
}
/// <summary>
/// Part creation
/// </summary>
public void CreateNewPart()
{
if (CreatePart.exisCheck == 1)
{
//Open existing part
swApp.OpenDoc6(CreatePart.pthfileName, 1, 1, "", 0, 0);
}
else
{
//create a part
PartDoc swPart = swApp.NewDocument(FileManager.pth_PRTTempl, 0, 0, 0);
}
assignModelProperties();
FileManager.create_PartAssyDrawNumber(1);
//Save the part under a specific number
swModel.SaveAs(FileManager.pth_SaveName);
}
static void CreateRevolve()
{
SldWorks swApp = new SldWorks();
ModelDoc2 swModel;
ModelDocExtension swModelDocExt;
FeatureManager swFeatMgr;
SelectionMgr swSelMgr;
bool boolstatus;
swModel = (ModelDoc2)swApp.NewDocument("C:\\Users\\nemati\\Documents\\Visual Studio 2015\\Projects\\SWBlankApp\\SWBlankApp\\PartTemplate.SLDPRT", 0, 0, 0);
//swModel = (ModelDoc2)swApp.ActiveDoc;
swModelDocExt = swModel.Extension;
swSelMgr = (SelectionMgr)swModel.SelectionManager;
boolstatus = swModelDocExt.SelectByID2("Right Plane", "PLANE", 0, 0, 0, true, 0, null, (int)swSelectOption_e.swSelectOptionDefault);
boolstatus = swModelDocExt.SelectByID2("Top Plane", "PLANE", 0, 0, 0, true, 0, null, (int)swSelectOption_e.swSelectOptionDefault);
swModel.InsertAxis2(true);
boolstatus = swModelDocExt.SelectByID2("Top Plane", "PLANE", -0.08954836342753, 0.0004336873289503, 0.006720765739942, false, 0, null, (int)swSelectOption_e.swSelectOptionDefault);
swModel.InsertSketch2(true);
swModel.ClearSelection2(true);
swModel.SketchRectangle(-0.05, -0.05, 0, 0, 0.1, 0, true);
swModel.InsertSketch2(true);
swModel.ShowNamedView2("*Trimetric", 8);
boolstatus = swModelDocExt.SelectByID2("Sketch1", "SKETCH", 0, 0, 0, false, 0, null, (int)swSelectOption_e.swSelectOptionDefault);
boolstatus = swModelDocExt.SelectByID2("Axis1", "AXIS", 0, 0, 0, true, 4, null, (int)swSelectOption_e.swSelectOptionDefault);
swFeatMgr = swModel.FeatureManager;
swFeatMgr.FeatureRevolve2(true, true, false, false, false, false, 0, 0, 6.28318530718, 0, false,
false, 0.01, 0.01, 0, 0, 0, true, true, true);
swModel.SaveAs("C:\\Users\\nemati\\Documents\\Visual Studio 2015\\Projects\\SWBlankApp\\SWBlankApp\\FeatureRevolve.SLDPRT");
swApp.ExitApp();
}
/// <summary>
/// Create a part using the standard template
/// </summary>
/// <returns></returns>
protected IModelDoc2 CreatePartDoc()
{
var partTemplateName = SwApp.GetUserPreferenceStringValue((int)swUserPreferenceStringValue_e.swDefaultTemplatePart);
return((IModelDoc2)SwApp.NewDocument(partTemplateName, 0, 0, 0));
}
//Microsoft.Office.Interop.MSProject
//string[] args
static void CreateSketch()
{
SldWorks swApp = new SldWorks();
//Feature myFeature;
ModelDoc2 swModel = default(ModelDoc2);
//RefPlane myRefPlane;
SketchManager swSkMgr = default(SketchManager);
FeatureManager swFeMgr = default(FeatureManager);
//Feature swFeat;
//Sketch swSketch;
int longstatus = 0;
bool boolstatus = false;
swApp.ResetUntitledCount(0, 0, 0);
swModel = (ModelDoc2)swApp.NewDocument("C:\\Users\\nemati\\Documents\\Visual Studio 2015\\Projects\\SWBlankApp\\SWBlankApp\\PartTemplate.SLDPRT", 0, 0, 0);
swApp.ActivateDoc2("Part1", false, ref longstatus);
swModel = (ModelDoc2)swApp.ActiveDoc;
swSkMgr = swModel.SketchManager;
swFeMgr = swModel.FeatureManager;
swSkMgr.InsertSketch(true);
//swFeMgr.FeatureExtruRefSurface()
boolstatus = swModel.Extension.SelectByID2("Top Plane", "PLANE", -0.0553489443349025, 0.00330468607538553, 0.0269617286188933, false, 0, null, 0);
swModel.ClearSelection2(true);
if (swModel == null)
{
swApp.SendMsgToUser2("Ridi.", (int)swMessageBoxIcon_e.swMbWarning, (int)swMessageBoxBtn_e.swMbOk);
return;
}
int modelType = 0;
modelType = swModel.GetType();
if (modelType != (int)swDocumentTypes_e.swDocPART)
{
swApp.SendMsgToUser2("A part document must be active.", (int)swMessageBoxIcon_e.swMbWarning, (int)swMessageBoxBtn_e.swMbOk);
return;
}
// Creating sample point
SketchPoint skPoint = default(SketchPoint);
skPoint = swSkMgr.CreatePoint(-100, 100, 0);
// Creating sample arc
SketchSegment skArc = default(SketchSegment);
skArc = swSkMgr.Create3PointArc(0, 0, 0, 10, 10, 0, -10, 10, 0);
// Creating sample circle
SketchSegment skCircle = default(SketchSegment);
skCircle = swSkMgr.CreateCircleByRadius(-20, 20, 0, 7.5);
swSkMgr.InsertSketch(true);
//swModel.SketchCircle();
Console.WriteLine(swApp.Visible.ToString());
Console.WriteLine(swApp.FrameWidth.ToString());
//swApp.CreateNewWindow();
swModel.SaveAs("C:\\Users\\nemati\\Documents\\Visual Studio 2015\\Projects\\SWBlankApp\\SWBlankApp\\SketchArc.SLDPRT");
//swApp.
swApp.ExitApp();
//swApp = null;
//swApp
}
/// <summary>
/// 通过模板创建新零件或者新项目
/// </summary>
/// <param name="app"></param>
/// <param name="TemFilePath">*.asmdot 或者 *.prtdot</param>
/// <returns></returns>
public static ModelDoc2 NewPartOrAssembly(this SldWorks app, string TemFilePath)
{
return(app.NewDocument(TemFilePath, (int)swDwgPaperSizes_e.swDwgPaperA4size, 100, 100) as ModelDoc2);
}
/// <summary>
/// 当结果返回True 时 表示两个零件不一样，结果false时表示 两个零件一样
/// </summary>
/// <param name="sendTocustomer"></param>
/// <param name="localModel"></param>
/// <returns></returns>
public bool CheckTwoParts(string sendTocustomer, string localModel)
{
bool different1 = false;
bool different2 = false;
swApp = ConnectToSolidWorks();
// swApp = ConnectToSolidWorks();
//加载参考关系零件
swApp.SetUserPreferenceIntegerValue((int)swUserPreferenceIntegerValue_e.swLoadExternalReferences, (int)swLoadExternalReferences_e.swLoadExternalReferences_ChangedOnly);
//后台模式 前台不显示界面
swApp.EnableBackgroundProcessing = true;
//禁止记录文件路径
swApp.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swLockRecentDocumentsList, true);
swApp.OpenDoc(localModel, 1);
swApp.OpenDoc(sendTocustomer, 1);
ModelDoc2 swModel = (ModelDoc2)swApp.ActiveDoc;
string LocalPath = System.IO.Directory.GetParent(swModel.GetPathName()).ToString();
string tempAssembly = swApp.GetUserPreferenceStringValue((int)swUserPreferenceStringValue_e.swDefaultTemplateAssembly);
AssemblyDoc assemblyDoc = (AssemblyDoc)swApp.NewDocument(tempAssembly, 0, 0, 0);
Component2 insertComponentSendtoCustomer = assemblyDoc.AddComponent5(sendTocustomer, 0, "", false, "", 0, 0, 0);
Component2 insertComponentLocal = assemblyDoc.AddComponent5(localModel, 0, "", false, "", 0, 0, 0);
string sendSelect = insertComponentSendtoCustomer.GetSelectByIDString();
string localSelect = insertComponentLocal.GetSelectByIDString();
swModel = (ModelDoc2)swApp.ActiveDoc;
bool b1 = swModel.Extension.SelectByID2("Point1@Origin" + "@" + sendSelect, "EXTSKETCHPOINT", 0, 0, 0, false, 0, null, 0);
bool b2 = swModel.Extension.SelectByID2("Point1@Origin" + "@" + localSelect, "EXTSKETCHPOINT", 0, 0, 0, true, 0, null, 0);
int longstatus;
Mate2 mate2 = assemblyDoc.AddMate5(20, -1, false, 0, 0.001, 0.001, 0.001, 0.001, 0, 0, 0, false, false, 0, out longstatus);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.SaveAs(LocalPath + @"\TopCheck.sldasm");
//不显示特征树
//swModel.Extension.HideFeatureManager(true);
swModel.ClearSelection2(true);
//swModel.FeatureManager.ViewFeatures = false;
//FeatureManager featureManager = swModel.FeatureManager;
//禁用特征树
//featureManager.EnableFeatureTree = false;
// swModel.FeatureManager.EnableFeatureTreeWindow = false;
#region first join
Component2 sendToCustomerBodies = default(Component2);
List <Component2> sendToCustomerBodiesList = new List <Component2>();
object swFaceOrPlane = default(object);
assemblyDoc.InsertNewVirtualPart(swFaceOrPlane, out sendToCustomerBodies);
sendToCustomerBodies.Select(true);
assemblyDoc.FixComponent();
sendToCustomerBodies.Select(true);
assemblyDoc.EditPart();
insertComponentSendtoCustomer.Select(false);
insertComponentLocal.Select(true);
assemblyDoc.InsertJoin2(false, false);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.BreakAllExternalReferences();
object[] splits = sendToCustomerBodies.Name2.Split('^');
// string compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + splits[0];
string compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + "localBodies-1";
ModelDoc2 compModel = default(ModelDoc2);
compModel = (ModelDoc2)sendToCustomerBodies.GetModelDoc();
if (compModel.GetType() == (int)swDocumentTypes_e.swDocPART)
{
compName = compName + ".sldprt";
}
else
{
compName = compName + ".sldasm";
}
bool ret;
ret = sendToCustomerBodies.SaveVirtualComponent(compName);
sendToCustomerBodiesList.Add(sendToCustomerBodies);
insertComponentSendtoCustomer.Select(false);
swModel = (ModelDoc2)sendToCustomerBodies.GetModelDoc2();
#region 获取所有零件中的零件，每一个实体做一次反切
List <string> bodyNamesCustomer = new List <string>();
PartDoc swPart = null;
object vBody;
swPart = (PartDoc)swModel;
// Solid bodies
object[] vBodyArr = null;
Body2 swBody = default(Body2);
MathTransform swMathTrans = null;
vBodyArr = (object[])swPart.GetBodies2((int)swBodyType_e.swSolidBody, true);
if ((vBodyArr != null))
{
// Debug.Print(" Number of solid bodies: " + vBodyArr.Length);
foreach (object vBody_loopVariable in vBodyArr)
{
vBody = vBody_loopVariable;
swBody = (Body2)vBody;
string[] vConfigName = null;
vConfigName = (string[])swModel.GetConfigurationNames();
string sMatDB = "";
string sMatName = swBody.GetMaterialPropertyName("", out sMatDB);
//bRet = swBody.RemoveMaterialProperty((int)swInConfigurationOpts_e.swAllConfiguration, (vConfigName));
//Debug.Print("Body--> " + swBody.Name + " " + "");
bodyNamesCustomer.Add(swBody.Name);
}
}
//如果实体数量大于1，则继续新建对应数量的join 实体。
OnlyKeepNamedBody(bodyNamesCustomer[0], sendToCustomerBodies.GetSelectByIDString(), assemblyDoc, sendToCustomerBodies, insertComponentSendtoCustomer, ref different1);
if (bodyNamesCustomer.Count > 1)
{
assemblyDoc.EditAssembly();
for (int i = 0; i < bodyNamesCustomer.Count - 1; i++)
{
Component2 returnpart = default(Component2);
var partSelect = CreateNewJoinPart(assemblyDoc, insertComponentSendtoCustomer, insertComponentLocal, swModel, "localBodies-" + (i + 2), out returnpart);
sendToCustomerBodiesList.Add(returnpart);
OnlyKeepNamedBody(bodyNamesCustomer[i + 1], partSelect, assemblyDoc, returnpart, insertComponentSendtoCustomer, ref different1);
}
}
// boolstatus = Part.Extension.SelectByID2("Join1[2]@localBodies-1@TopCheck", "SOLIDBODY", 0, 0, 0, True, 0, Nothing, 0)
//Dim myFeature As Object
//Set myFeature = Part.FeatureManager.InsertDeleteBody2(True)
#endregion 获取所有零件中的零件，每一个实体做一次反切
//assemblyDoc.InsertCavity4(0, 0, 0, true, 1, -1);
Feature theFeature;
//theFeature = swModel.FeatureByPositionReverse(0);
//if (theFeature.Name.Contains("Cavity"))
//{
// //theFeature.Select(true);
// swModel = (ModelDoc2)swApp.ActiveDoc;
// bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + sendToCustomerBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
// swModel.BreakAllExternalReferences();
// different1 = true;
// //JoinPart1 留下的: 发给客户的没有此部分。 而本地零件中有
//}
//else
//{
// //无法Join时表示 全切了。
// swModel = (ModelDoc2)swApp.ActiveDoc;
// bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + sendToCustomerBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
// swModel.EditSuppress();
//}
//sendToCustomerBodies.Select(true);
assemblyDoc.EditAssembly();
#endregion first join
#region sercond join2
Component2 localBodies = default(Component2);
List <Component2> LocalBodiesList = new List <Component2>();
assemblyDoc.InsertNewVirtualPart(swFaceOrPlane, out localBodies);
localBodies.Select(true);
assemblyDoc.FixComponent();
localBodies.Select(true);
assemblyDoc.EditPart();
insertComponentSendtoCustomer.Select(false);
insertComponentLocal.Select(true);
assemblyDoc.InsertJoin2(false, false);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.BreakAllExternalReferences();
splits = localBodies.Name2.Split('^');
// string compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + splits[0];
compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + "sendToCustomerBodies-1";
compModel = default(ModelDoc2);
compModel = (ModelDoc2)localBodies.GetModelDoc();
if (compModel.GetType() == (int)swDocumentTypes_e.swDocPART)
{
compName = compName + ".sldprt";
}
else
{
compName = compName + ".sldasm";
}
ret = localBodies.SaveVirtualComponent(compName);
LocalBodiesList.Add(localBodies);
insertComponentLocal.Select(false);
swModel = (ModelDoc2)localBodies.GetModelDoc2();
#region 获取所有零件中的零件，每一个实体做一次反切
List <string> bodyNamesLocal = new List <string>();
PartDoc swPart2 = null;
object vBody2;
swPart2 = (PartDoc)swModel;
// Solid bodies
object[] vBodyArr2 = null;
Body2 swBody2 = default(Body2);
MathTransform swMathTrans2 = null;
vBodyArr2 = (object[])swPart2.GetBodies2((int)swBodyType_e.swSolidBody, true);
if ((vBodyArr2 != null))
{
// Debug.Print(" Number of solid bodies: " + vBodyArr.Length);
foreach (object vBody_loopVariable in vBodyArr2)
{
vBody2 = vBody_loopVariable;
swBody2 = (Body2)vBody2;
string[] vConfigName = null;
vConfigName = (string[])swModel.GetConfigurationNames();
string sMatDB = "";
string sMatName = swBody2.GetMaterialPropertyName("", out sMatDB);
//bRet = swBody.RemoveMaterialProperty((int)swInConfigurationOpts_e.swAllConfiguration, (vConfigName));
bodyNamesLocal.Add(swBody2.Name);
}
}
//如果实体数量大于1，则继续新建对应数量的join 实体。
OnlyKeepNamedBody(bodyNamesLocal[0], localBodies.GetSelectByIDString(), assemblyDoc, localBodies, insertComponentLocal, ref different2);
if (bodyNamesLocal.Count > 1)
{
assemblyDoc.EditAssembly();
for (int i = 0; i < bodyNamesLocal.Count - 1; i++)
{
Component2 returnpart = default(Component2);
var partSelect = CreateNewJoinPart(assemblyDoc, insertComponentSendtoCustomer, insertComponentLocal, swModel, "sendToCustomerBodies-" + (i + 2), out returnpart);
LocalBodiesList.Add(returnpart);
OnlyKeepNamedBody(bodyNamesLocal[i + 1], partSelect, assemblyDoc, returnpart, insertComponentLocal, ref different2);
}
}
// boolstatus = Part.Extension.SelectByID2("Join1[2]@localBodies-1@TopCheck", "SOLIDBODY", 0, 0, 0, True, 0, Nothing, 0)
//Dim myFeature As Object
//Set myFeature = Part.FeatureManager.InsertDeleteBody2(True)
#endregion 获取所有零件中的零件，每一个实体做一次反切
//assemblyDoc.InsertCavity4(0, 0, 0, true, 1, -1);
//theFeature = swModel.FeatureByPositionReverse(0);
//swModel = (ModelDoc2)localBodies.GetModelDoc2();
//theFeature = swModel.FeatureByPositionReverse(0);
//if (theFeature.Name.Contains("Cavity"))
//{
// //theFeature.Select(true);
// swModel = (ModelDoc2)swApp.ActiveDoc;
// bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + localBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
// swModel.BreakAllExternalReferences();
// different2 = true;
// //JoinPart2 留下的: 发给客户的有此部分。 而本地零件中没有
//}
//else
//{
// //无法Join时表示 全切了。
// swModel = (ModelDoc2)swApp.ActiveDoc;
// bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + sendToCustomerBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
// swModel.EditSuppress();
//}
//localBodies.Select(true);
//assemblyDoc.EditAssembly();
#endregion sercond join2
#region joinPartPublic
Component2 publicBodies = default(Component2);
assemblyDoc.InsertNewVirtualPart(swFaceOrPlane, out publicBodies);
publicBodies.Select(true);
assemblyDoc.FixComponent();
publicBodies.Select(true);
assemblyDoc.EditPart();
insertComponentSendtoCustomer.Select(false);
insertComponentLocal.Select(true);
assemblyDoc.InsertJoin2(false, false);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.BreakAllExternalReferences();
splits = publicBodies.Name2.Split('^');
// string compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + splits[0];
compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + "publicBodies";
compModel = default(ModelDoc2);
compModel = (ModelDoc2)publicBodies.GetModelDoc();
if (compModel.GetType() == (int)swDocumentTypes_e.swDocPART)
{
compName = compName + ".sldprt";
}
else
{
compName = compName + ".sldasm";
}
ret = publicBodies.SaveVirtualComponent(compName);
swModel.ClearSelection();
foreach (var item in sendToCustomerBodiesList)
{
item.Select(false);
assemblyDoc.InsertCavity4(0, 0, 0, true, 1, -1);
theFeature = (Feature)swModel.FeatureByPositionReverse(0);
swModel = (ModelDoc2)publicBodies.GetModelDoc2();
theFeature = (Feature)swModel.FeatureByPositionReverse(0);
if (theFeature.Name.Contains("Cavity"))
{
//theFeature.Select(true);
swModel = (ModelDoc2)swApp.ActiveDoc;
bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + publicBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
swModel.BreakAllExternalReferences();
//joinPartPublic 留下的: 发给客户的有此部分。 而本地零件中没有
}
else
{
}
}
foreach (var item in LocalBodiesList)
{
item.Select(false);
assemblyDoc.InsertCavity4(0, 0, 0, true, 1, -1);
theFeature = (Feature)swModel.FeatureByPositionReverse(0);
swModel = (ModelDoc2)publicBodies.GetModelDoc2();
theFeature = (Feature)swModel.FeatureByPositionReverse(0);
if (theFeature.Name.Contains("Cavity"))
{
//theFeature.Select(true);
swModel = (ModelDoc2)swApp.ActiveDoc;
bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + publicBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
swModel.BreakAllExternalReferences();
//joinPartPublic 留下的: 发给客户的有此部分。 而本地零件中没有
}
else
{
}
}
publicBodies.Select(true);
assemblyDoc.EditAssembly();
#endregion joinPartPublic
foreach (var item in sendToCustomerBodiesList)
{
item.Select(false);
setColour(Color.Red);
}
foreach (var item in LocalBodiesList)
{
item.Select(false);
setColour(Color.Blue);
}
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.ClearSelection2(true);
insertComponentLocal.Select(false);
insertComponentSendtoCustomer.Select(true);
swModel.HideComponent2();
swModel.ClearSelection2(true);
publicBodies.Select(false);
assemblyDoc.SetComponentTransparent(true);
setColour(Color.Green);
swModel.EditRebuild3();
swModel.Save();
swModel.SaveAs3(LocalPath + @"\01_CheckResult.sldprt", 0, 0);
swApp.CloseDoc("TopCheck.sldasm");
swApp.CloseAllDocuments(true);
swApp.OpenDoc(LocalPath + @"\01_CheckResult.sldprt", 1);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.ShowNamedView2("*Isometric", 7);
swModel.ViewZoomtofit2();
swApp.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swLockRecentDocumentsList, false);
try
{
System.IO.File.Delete(LocalPath + @"\TopCheck.sldasm");
System.IO.File.Delete(LocalPath + @"\localBodies.sldprt");
System.IO.File.Delete(LocalPath + @"\sendToCustomerBodies.sldprt");
System.IO.File.Delete(LocalPath + @"\publicBodies.sldprt");
}
catch (Exception)
{
}
//第二次反向剪切
swApp.CloseDoc(sendTocustomer);
swApp.CloseDoc(localModel);
swModel.FeatureManager.EnableFeatureTree = true;
swApp.SetUserPreferenceIntegerValue((int)swUserPreferenceIntegerValue_e.swLoadExternalReferences, 2);
if (different1 == false && different2 == false)
{
return(false);
}
else
{
return(true);
}
}
