|
private UpdateConfiguration ( |
||
| config | ||
| statisticsConfig | ||
| return | void | |
public void UpdateStatisticsConfiguration(bool enabled)
{
if (availabilityStatistics != null)
{
availabilityStatistics.UpdateConfiguration(this);
_config.availabilityStatistics = enabled;
SaveConfig(_config);
}
}
protected void Reload()
{
// some logic in configuration updated the config when saving, we need to read it again
_config = Configuration.Load();
if (_listener != null)
{
_listener.Stop();
}
if (_availabilityStatics == null)
{
_availabilityStatics = new AvailabilityStatistics();
_availabilityStatics.UpdateConfiguration(_config);
}
try
{
var strategy = GetCurrentStrategy();
if (strategy != null)
{
strategy.ReloadServers();
}
TCPRelay tcpRelay = new TCPRelay(this);
UDPRelay udpRelay = new UDPRelay(this);
List <Listener.Service> services = new List <Listener.Service>();
services.Add(tcpRelay);
services.Add(udpRelay);
_listener = new Listener(services);
_listener.Start(_config);
}
catch (Exception e)
{
// translate Microsoft language into human language
// i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use
if (e is SocketException)
{
SocketException se = (SocketException)e;
if (se.SocketErrorCode == SocketError.AccessDenied)
{
e = new Exception(I18N.GetString("Port already in use"), e);
}
}
Logging.LogUsefulException(e);
ReportError(e);
}
if (ConfigChanged != null)
{
ConfigChanged(this, new EventArgs());
}
Util.Utils.ReleaseMemory(true);
}
protected void Reload()
{
// some logic in configuration updated the config when saving, we need to read it again
_config = Configuration.Load();
if (polipoRunner == null)
{
polipoRunner = new PolipoRunner();
}
if (_pacServer == null)
{
_pacServer = new PACServer();
_pacServer.PACFileChanged += pacServer_PACFileChanged;
}
_pacServer.UpdateConfiguration(_config);
if (gfwListUpdater == null)
{
gfwListUpdater = new GFWListUpdater();
gfwListUpdater.UpdateCompleted += pacServer_PACUpdateCompleted;
gfwListUpdater.Error += pacServer_PACUpdateError;
}
if (_listener != null)
{
_listener.Stop();
}
if (_availabilityStatics == null)
{
_availabilityStatics = new AvailabilityStatistics();
_availabilityStatics.UpdateConfiguration(_config);
}
// don't put polipoRunner.Start() before pacServer.Stop()
// or bind will fail when switching bind address from 0.0.0.0 to 127.0.0.1
// though UseShellExecute is set to true now
// http://stackoverflow.com/questions/10235093/socket-doesnt-close-after-application-exits-if-a-launched-process-is-open
polipoRunner.Stop();
try
{
var strategy = GetCurrentStrategy();
if (strategy != null)
{
strategy.ReloadServers();
}
polipoRunner.Start(_config);
TCPRelay tcpRelay = new TCPRelay(this);
UDPRelay udpRelay = new UDPRelay(this);
List<Listener.Service> services = new List<Listener.Service>();
services.Add(tcpRelay);
services.Add(udpRelay);
services.Add(_pacServer);
services.Add(new PortForwarder(polipoRunner.RunningPort));
_listener = new Listener(services);
_listener.Start(_config);
}
catch (Exception e)
{
// translate Microsoft language into human language
// i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use
if (e is SocketException)
{
SocketException se = (SocketException)e;
if (se.SocketErrorCode == SocketError.AccessDenied)
{
e = new Exception(I18N.GetString("Port already in use"), e);
}
}
Logging.LogUsefulException(e);
ReportError(e);
}
if (ConfigChanged != null)
{
ConfigChanged(this, new EventArgs());
}
UpdateSystemProxy();
Util.Utils.ReleaseMemory(true);
}
protected void Reload()
{
// some logic in configuration updated the config when saving, we need to read it again
_config = Configuration.Load();
if (_polipoRunner == null)
{
_polipoRunner = new PolipoRunner();
}
if (_pacServer == null)
{
_pacServer = new PACServer();
_pacServer.PACFileChanged += pacServer_PACFileChanged;
}
_pacServer.UpdateConfiguration(_config);
if (_gfwListUpdater == null)
{
_gfwListUpdater = new GFWListUpdater();
_gfwListUpdater.UpdateCompleted += pacServer_PACUpdateCompleted;
_gfwListUpdater.Error += pacServer_PACUpdateError;
}
if (_listener != null)
{
_listener.Stop();
}
if (_availabilityStatics == null)
{
_availabilityStatics = new AvailabilityStatistics();
_availabilityStatics.UpdateConfiguration(_config);
}
// don't put polipoRunner.Start() before pacServer.Stop()
// or bind will fail when switching bind address from 0.0.0.0 to 127.0.0.1
// though UseShellExecute is set to true now
// http://stackoverflow.com/questions/10235093/socket-doesnt-close-after-application-exits-if-a-launched-process-is-open
_polipoRunner.Stop();
try
{
var strategy = GetCurrentStrategy();
if (strategy != null)
{
strategy.ReloadServers();
}
_polipoRunner.Start(_config);
TCPRelay tcpRelay = new TCPRelay(this);
UDPRelay udpRelay = new UDPRelay(this);
List <IService> services = new List <IService>();
services.Add(tcpRelay);
services.Add(udpRelay);
services.Add(_pacServer);
services.Add(new PortForwarder(_polipoRunner.RunningPort));
_listener = new Listener(services);
_listener.Start(_config);
}
catch (Exception e)
{
// translate Microsoft language into human language
// i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use
if (e is SocketException)
{
SocketException se = (SocketException)e;
if (se.SocketErrorCode == SocketError.AccessDenied)
{
e = new Exception(I18N.GetString("Port already in use"), e);
}
}
Logging.LogUsefulException(e);
ReportError(e);
}
if (ConfigChanged != null)
{
ConfigChanged(this, new EventArgs());
}
UpdateSystemProxy();
Util.Utils.ReleaseMemory(true);
}
protected void Reload()
{
Encryption.RNG.Reload();
// some logic in configuration updated the config when saving, we need to read it again
_config = Configuration.Load();
NLogConfig.LoadConfiguration();
StatisticsConfiguration = StatisticsStrategyConfiguration.Load();
privoxyRunner = privoxyRunner ?? new PrivoxyRunner();
_pacDaemon = _pacDaemon ?? new PACDaemon(_config);
_pacDaemon.PACFileChanged += PacDaemon_PACFileChanged;
_pacDaemon.UserRuleFileChanged += PacDaemon_UserRuleFileChanged;
_pacServer = _pacServer ?? new PACServer(_pacDaemon);
_pacServer.UpdatePACURL(_config); // So PACServer works when system proxy disabled.
GeositeUpdater.ResetEvent();
GeositeUpdater.UpdateCompleted += PacServer_PACUpdateCompleted;
GeositeUpdater.Error += PacServer_PACUpdateError;
availabilityStatistics.UpdateConfiguration(this);
_listener?.Stop();
StopPlugins();
// don't put PrivoxyRunner.Start() before pacServer.Stop()
// or bind will fail when switching bind address from 0.0.0.0 to 127.0.0.1
// though UseShellExecute is set to true now
// http://stackoverflow.com/questions/10235093/socket-doesnt-close-after-application-exits-if-a-launched-process-is-open
privoxyRunner.Stop();
try
{
var strategy = GetCurrentStrategy();
strategy?.ReloadServers();
StartPlugin();
privoxyRunner.Start(_config);
TCPRelay tcpRelay = new TCPRelay(this, _config);
tcpRelay.OnConnected += UpdateLatency;
tcpRelay.OnInbound += UpdateInboundCounter;
tcpRelay.OnOutbound += UpdateOutboundCounter;
tcpRelay.OnFailed += (o, e) => GetCurrentStrategy()?.SetFailure(e.server);
UDPRelay udpRelay = new UDPRelay(this);
List <Listener.IService> services = new List <Listener.IService>
{
tcpRelay,
udpRelay,
_pacServer,
new PortForwarder(privoxyRunner.RunningPort)
};
_listener = new Listener(services);
_listener.Start(_config);
}
catch (Exception e)
{
// translate Microsoft language into human language
// i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use
if (e is SocketException se)
{
if (se.SocketErrorCode == SocketError.AddressAlreadyInUse)
{
e = new Exception(I18N.GetString("Port {0} already in use", _config.localPort), e);
}
else if (se.SocketErrorCode == SocketError.AccessDenied)
{
e = new Exception(I18N.GetString("Port {0} is reserved by system", _config.localPort), e);
}
}
logger.LogUsefulException(e);
ReportError(e);
}
ConfigChanged?.Invoke(this, new EventArgs());
UpdateSystemProxy();
Utils.ReleaseMemory(true);
}
protected void Reload()
{
// some logic in configuration updated the config when saving, we need to read it again
_config = Configuration.Load();
if (_listener != null)
{
_listener.Stop();
}
if (_availabilityStatics == null)
{
_availabilityStatics = new AvailabilityStatistics();
_availabilityStatics.UpdateConfiguration(_config);
}
try
{
var strategy = GetCurrentStrategy();
if (strategy != null)
{
strategy.ReloadServers();
}
TCPRelay tcpRelay = new TCPRelay(this);
UDPRelay udpRelay = new UDPRelay(this);
List<Listener.Service> services = new List<Listener.Service>();
services.Add(tcpRelay);
services.Add(udpRelay);
_listener = new Listener(services);
_listener.Start(_config);
}
catch (Exception e)
{
// translate Microsoft language into human language
// i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use
if (e is SocketException)
{
SocketException se = (SocketException)e;
if (se.SocketErrorCode == SocketError.AccessDenied)
{
e = new Exception(I18N.GetString("Port already in use"), e);
}
}
Logging.LogUsefulException(e);
ReportError(e);
}
if (ConfigChanged != null)
{
ConfigChanged(this, new EventArgs());
}
Util.Utils.ReleaseMemory(true);
}