private UpdateConfiguration ( |
||
config | ||
statisticsConfig | ||
return | void |
public void UpdateStatisticsConfiguration(bool enabled) { if (availabilityStatistics != null) { availabilityStatistics.UpdateConfiguration(this); _config.availabilityStatistics = enabled; SaveConfig(_config); } }
protected void Reload() { // some logic in configuration updated the config when saving, we need to read it again _config = Configuration.Load(); if (_listener != null) { _listener.Stop(); } if (_availabilityStatics == null) { _availabilityStatics = new AvailabilityStatistics(); _availabilityStatics.UpdateConfiguration(_config); } try { var strategy = GetCurrentStrategy(); if (strategy != null) { strategy.ReloadServers(); } TCPRelay tcpRelay = new TCPRelay(this); UDPRelay udpRelay = new UDPRelay(this); List <Listener.Service> services = new List <Listener.Service>(); services.Add(tcpRelay); services.Add(udpRelay); _listener = new Listener(services); _listener.Start(_config); } catch (Exception e) { // translate Microsoft language into human language // i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use if (e is SocketException) { SocketException se = (SocketException)e; if (se.SocketErrorCode == SocketError.AccessDenied) { e = new Exception(I18N.GetString("Port already in use"), e); } } Logging.LogUsefulException(e); ReportError(e); } if (ConfigChanged != null) { ConfigChanged(this, new EventArgs()); } Util.Utils.ReleaseMemory(true); }
protected void Reload() { // some logic in configuration updated the config when saving, we need to read it again _config = Configuration.Load(); if (polipoRunner == null) { polipoRunner = new PolipoRunner(); } if (_pacServer == null) { _pacServer = new PACServer(); _pacServer.PACFileChanged += pacServer_PACFileChanged; } _pacServer.UpdateConfiguration(_config); if (gfwListUpdater == null) { gfwListUpdater = new GFWListUpdater(); gfwListUpdater.UpdateCompleted += pacServer_PACUpdateCompleted; gfwListUpdater.Error += pacServer_PACUpdateError; } if (_listener != null) { _listener.Stop(); } if (_availabilityStatics == null) { _availabilityStatics = new AvailabilityStatistics(); _availabilityStatics.UpdateConfiguration(_config); } // don't put polipoRunner.Start() before pacServer.Stop() // or bind will fail when switching bind address from 0.0.0.0 to 127.0.0.1 // though UseShellExecute is set to true now // http://stackoverflow.com/questions/10235093/socket-doesnt-close-after-application-exits-if-a-launched-process-is-open polipoRunner.Stop(); try { var strategy = GetCurrentStrategy(); if (strategy != null) { strategy.ReloadServers(); } polipoRunner.Start(_config); TCPRelay tcpRelay = new TCPRelay(this); UDPRelay udpRelay = new UDPRelay(this); List<Listener.Service> services = new List<Listener.Service>(); services.Add(tcpRelay); services.Add(udpRelay); services.Add(_pacServer); services.Add(new PortForwarder(polipoRunner.RunningPort)); _listener = new Listener(services); _listener.Start(_config); } catch (Exception e) { // translate Microsoft language into human language // i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use if (e is SocketException) { SocketException se = (SocketException)e; if (se.SocketErrorCode == SocketError.AccessDenied) { e = new Exception(I18N.GetString("Port already in use"), e); } } Logging.LogUsefulException(e); ReportError(e); } if (ConfigChanged != null) { ConfigChanged(this, new EventArgs()); } UpdateSystemProxy(); Util.Utils.ReleaseMemory(true); }
protected void Reload() { // some logic in configuration updated the config when saving, we need to read it again _config = Configuration.Load(); if (_polipoRunner == null) { _polipoRunner = new PolipoRunner(); } if (_pacServer == null) { _pacServer = new PACServer(); _pacServer.PACFileChanged += pacServer_PACFileChanged; } _pacServer.UpdateConfiguration(_config); if (_gfwListUpdater == null) { _gfwListUpdater = new GFWListUpdater(); _gfwListUpdater.UpdateCompleted += pacServer_PACUpdateCompleted; _gfwListUpdater.Error += pacServer_PACUpdateError; } if (_listener != null) { _listener.Stop(); } if (_availabilityStatics == null) { _availabilityStatics = new AvailabilityStatistics(); _availabilityStatics.UpdateConfiguration(_config); } // don't put polipoRunner.Start() before pacServer.Stop() // or bind will fail when switching bind address from 0.0.0.0 to 127.0.0.1 // though UseShellExecute is set to true now // http://stackoverflow.com/questions/10235093/socket-doesnt-close-after-application-exits-if-a-launched-process-is-open _polipoRunner.Stop(); try { var strategy = GetCurrentStrategy(); if (strategy != null) { strategy.ReloadServers(); } _polipoRunner.Start(_config); TCPRelay tcpRelay = new TCPRelay(this); UDPRelay udpRelay = new UDPRelay(this); List <IService> services = new List <IService>(); services.Add(tcpRelay); services.Add(udpRelay); services.Add(_pacServer); services.Add(new PortForwarder(_polipoRunner.RunningPort)); _listener = new Listener(services); _listener.Start(_config); } catch (Exception e) { // translate Microsoft language into human language // i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use if (e is SocketException) { SocketException se = (SocketException)e; if (se.SocketErrorCode == SocketError.AccessDenied) { e = new Exception(I18N.GetString("Port already in use"), e); } } Logging.LogUsefulException(e); ReportError(e); } if (ConfigChanged != null) { ConfigChanged(this, new EventArgs()); } UpdateSystemProxy(); Util.Utils.ReleaseMemory(true); }
protected void Reload() { Encryption.RNG.Reload(); // some logic in configuration updated the config when saving, we need to read it again _config = Configuration.Load(); NLogConfig.LoadConfiguration(); StatisticsConfiguration = StatisticsStrategyConfiguration.Load(); privoxyRunner = privoxyRunner ?? new PrivoxyRunner(); _pacDaemon = _pacDaemon ?? new PACDaemon(_config); _pacDaemon.PACFileChanged += PacDaemon_PACFileChanged; _pacDaemon.UserRuleFileChanged += PacDaemon_UserRuleFileChanged; _pacServer = _pacServer ?? new PACServer(_pacDaemon); _pacServer.UpdatePACURL(_config); // So PACServer works when system proxy disabled. GeositeUpdater.ResetEvent(); GeositeUpdater.UpdateCompleted += PacServer_PACUpdateCompleted; GeositeUpdater.Error += PacServer_PACUpdateError; availabilityStatistics.UpdateConfiguration(this); _listener?.Stop(); StopPlugins(); // don't put PrivoxyRunner.Start() before pacServer.Stop() // or bind will fail when switching bind address from 0.0.0.0 to 127.0.0.1 // though UseShellExecute is set to true now // http://stackoverflow.com/questions/10235093/socket-doesnt-close-after-application-exits-if-a-launched-process-is-open privoxyRunner.Stop(); try { var strategy = GetCurrentStrategy(); strategy?.ReloadServers(); StartPlugin(); privoxyRunner.Start(_config); TCPRelay tcpRelay = new TCPRelay(this, _config); tcpRelay.OnConnected += UpdateLatency; tcpRelay.OnInbound += UpdateInboundCounter; tcpRelay.OnOutbound += UpdateOutboundCounter; tcpRelay.OnFailed += (o, e) => GetCurrentStrategy()?.SetFailure(e.server); UDPRelay udpRelay = new UDPRelay(this); List <Listener.IService> services = new List <Listener.IService> { tcpRelay, udpRelay, _pacServer, new PortForwarder(privoxyRunner.RunningPort) }; _listener = new Listener(services); _listener.Start(_config); } catch (Exception e) { // translate Microsoft language into human language // i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use if (e is SocketException se) { if (se.SocketErrorCode == SocketError.AddressAlreadyInUse) { e = new Exception(I18N.GetString("Port {0} already in use", _config.localPort), e); } else if (se.SocketErrorCode == SocketError.AccessDenied) { e = new Exception(I18N.GetString("Port {0} is reserved by system", _config.localPort), e); } } logger.LogUsefulException(e); ReportError(e); } ConfigChanged?.Invoke(this, new EventArgs()); UpdateSystemProxy(); Utils.ReleaseMemory(true); }
protected void Reload() { // some logic in configuration updated the config when saving, we need to read it again _config = Configuration.Load(); if (_listener != null) { _listener.Stop(); } if (_availabilityStatics == null) { _availabilityStatics = new AvailabilityStatistics(); _availabilityStatics.UpdateConfiguration(_config); } try { var strategy = GetCurrentStrategy(); if (strategy != null) { strategy.ReloadServers(); } TCPRelay tcpRelay = new TCPRelay(this); UDPRelay udpRelay = new UDPRelay(this); List<Listener.Service> services = new List<Listener.Service>(); services.Add(tcpRelay); services.Add(udpRelay); _listener = new Listener(services); _listener.Start(_config); } catch (Exception e) { // translate Microsoft language into human language // i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use if (e is SocketException) { SocketException se = (SocketException)e; if (se.SocketErrorCode == SocketError.AccessDenied) { e = new Exception(I18N.GetString("Port already in use"), e); } } Logging.LogUsefulException(e); ReportError(e); } if (ConfigChanged != null) { ConfigChanged(this, new EventArgs()); } Util.Utils.ReleaseMemory(true); }