static CsgObject DialGaugeMount()
{
// CSG object is a Constructive Solid Geometry Object (a basic part in our system for doing boolean operations).
CsgObject dialGauge; // the csg object we will use as the master part.
CsgObject frontBarRide = new Box(50, xCarriageBarWidth + 4, xCarriageBarWidth / 2 + 4);
CsgObject barGroove = new Cylinder(xCarriageBarWidth / 2, frontBarRide.XSize + .2, Alignment.x);
barGroove = new Translate(barGroove, 0, 0, -barGroove.ZSize / 2);
frontBarRide -= barGroove;
dialGauge = frontBarRide;
CsgObject backBarRide = frontBarRide.NewMirrorAccrossY();
backBarRide = new Translate(backBarRide, 0, xCarriageSeparation, 0);
dialGauge += backBarRide;
CsgObject frontSideWall = new Box(frontBarRide.XSize, wallWidth, wallHeight);
frontSideWall = new Align(frontSideWall, Face.Front | Face.Top, frontBarRide, Face.Back | Face.Top, offsetY: -.02); // offset it to ensure good stl geometry
dialGauge += frontSideWall;
CsgObject backSideWall = new Box(frontBarRide.XSize, wallWidth, wallHeight);
backSideWall = new Align(backSideWall, Face.Back | Face.Top, backBarRide, Face.Front | Face.Top, offsetY: .02); // offset it to ensure good stl geometry
dialGauge += backSideWall;
// make the plate on the bottom
double distanceAccrossBottom = backSideWall.GetAxisAlignedBoundingBox().minXYZ.y - frontSideWall.GetAxisAlignedBoundingBox().maxXYZ.y;
CsgObject dialBase = new Box(frontBarRide.XSize, distanceAccrossBottom + .02, wallWidth); // make it bigger so it is manifold
dialBase = new Align(dialBase, Face.Front | Face.Bottom, frontSideWall, Face.Back | Face.Bottom, offsetY: .01);
dialGauge += dialBase;
// an some side walls for strength
CsgObject leftSideWall = new Box(wallWidth, dialBase.YSize, frontSideWall.ZSize, "#leftsidewall");
leftSideWall = new Align(leftSideWall, Face.Left | Face.Bottom | Face.Front, dialBase, Face.Left | Face.Bottom | Face.Front);
dialGauge += leftSideWall;
CsgObject rightSideWall = new Box(wallWidth, dialBase.YSize, frontSideWall.ZSize, "#rightsidewall");
rightSideWall = new Align(rightSideWall, Face.Right | Face.Bottom | Face.Front, dialBase, Face.Right | Face.Bottom | Face.Front);
dialGauge += rightSideWall;
CsgObject dialGaugeHole = new Cylinder(diameterOfDialGaugeBar / 2, dialBase.ZSize + .02, Alignment.z);
dialGaugeHole = new SetCenter(dialGaugeHole, dialBase.GetCenter() + new Vector3(0, dialGaugeBarOffsetFromCenter, 0));
dialGauge -= dialGaugeHole;
CsgObject bridgeSupport = new Box(dialBase.XSize, dialBase.YSize, .5, "#test");
bridgeSupport = new SetCenter(bridgeSupport, dialBase.GetCenter());
bridgeSupport = new Align(bridgeSupport, Face.Top, dialBase, Face.Top);
dialGauge += bridgeSupport;
return(dialGauge);
}
static CsgObject StepArm()
{
CsgObject totalMount; // the csg object we will use as the master part.
CsgObject pivotHole = new Cylinder(pivotHoleRadius / 2, pivotHeight + .1);
CsgObject pivotMount = new Cylinder(pivotRingRadius / 2, pivotHeight);
pivotMount = new Align(pivotMount, Face.Bottom, pivotHole, Face.Bottom, offsetZ: .02);
totalMount = pivotMount;
CsgObject holdArm = new Box(armLength, pivotRingRadius, wallWidth);
holdArm = new Align(holdArm, Face.Left | Face.Front | Face.Bottom, pivotMount, Face.Left | Face.Front | Face.Bottom, offsetX: pivotRingRadius / 2);
totalMount += holdArm;
CsgObject bracingWall = new Box(wallWidth, wallWidth, pivotMount.ZSize - wallWidth);
bracingWall = new SetCenter(bracingWall, holdArm.GetCenter());
bracingWall = new Align(bracingWall, Face.Right | Face.Top, pivotMount, Face.Right | Face.Top);
totalMount += bracingWall;
CsgObject bracingArm = new Box(armLength, wallWidth, wallWidth);
bracingArm = new SetCenter(bracingArm, holdArm.GetCenter());
bracingArm = new Align(bracingArm, Face.Bottom | Face.Left, holdArm, Face.Top | Face.Left, offsetZ: -.1);
totalMount += bracingArm;
totalMount += Round.CreateFillet(bracingWall, Face.Right, bracingArm, Face.Top, 3);
//totalMount += Round.CreateFillet(bracingArm, Face.Right, holdArm, Face.Top, wallWidth);
double toothSelectorSize = 4;
double diagonalSize = Math.Sqrt(toothSelectorSize * toothSelectorSize / 2);
CsgObject toothSelectorBack = new Box(diagonalSize * 2, diagonalSize * 2, wallWidth * 2);
toothSelectorBack = new Align(toothSelectorBack, Face.Right | Face.Front | Face.Bottom, totalMount, Face.Right | Face.Front | Face.Bottom);
totalMount += toothSelectorBack;
CsgObject toothSelector = new Box(toothSelectorSize, toothSelectorSize, wallWidth * 2);
toothSelector = new Rotate(toothSelector, 0, 0, MathHelper.Tau / 8);
toothSelector = new Align(toothSelector, Face.Right | Face.Front | Face.Bottom, totalMount, Face.Right | Face.Front | Face.Bottom, offsetY: -diagonalSize);
totalMount += toothSelector;
totalMount -= pivotHole;
return(totalMount);
}
static CsgObject SpoolBarHolderM90()
{
CsgObject total;
CsgObject centerSupport = new Box(mendal90FrameWidth + wallWidth * 2, clipLengthY, wallWidth);
total = centerSupport;
CsgObject clipWallLeft = new Box(wallWidth, clipLengthY, clipReachZDown);
clipWallLeft = new Align(clipWallLeft, Face.Left | Face.Top, centerSupport, Face.Left | Face.Top);
CsgObject attachHole = new Cylinder(attacheHoleDiameter / 2, wallWidth + .2, Alignment.x);
attachHole = new Align(attachHole, Face.Top, centerSupport, Face.Bottom, offsetZ: -attachHoleOffsetZ);
attachHole = new SetCenter(attachHole, clipWallLeft.GetCenter(), onY: false, onZ: false);
clipWallLeft -= attachHole;
total += clipWallLeft;
CsgObject clipWallRight = clipWallLeft.NewMirrorAccrossX();
total += clipWallRight;
Box spoolHoldBox = new Box(wallWidth, rodDiameter * 3, clipReachZUp);
//spoolHoldBox.BevelEdge(Face.Front | Face.Top, rodDiameter/2);
//spoolHoldBox.BevelEdge(Face.Back | Face.Top, rodDiameter / 2);
CsgObject spoolHold = spoolHoldBox;
spoolHold -= new Align(new Cylinder(rodDiameter / 2, wallWidth + 2, Alignment.x), Face.Top, spoolHold, Face.Top);
spoolHold -= new Align(new Box(wallWidth + 2, rodDiameter, rodDiameter / 2), Face.Top, spoolHold, Face.Top, offsetZ: .1);
total += new Align(spoolHold, Face.Bottom, centerSupport, Face.Bottom);
total += Round.CreateFillet(spoolHold, Face.Left, centerSupport, Face.Top, 2);
total += Round.CreateFillet(spoolHold, Face.Right, centerSupport, Face.Top, 2);
total -= Round.CreateBevel(centerSupport, Edge.LeftTop, 2);
total -= Round.CreateBevel(centerSupport, Edge.RightTop, 2);
return(total);
}
static CsgObject Render()
{
// CSG object is a Constructive Solid Geometry Object (a basic part in our system for doing boolean operations).
CsgObject totalMount; // the csg object we will use as the master part.
CsgObject pivotHole = new Cylinder(pivotHoleRadius / 2, pivotHeight + .1);
CsgObject pivotMount = new Cylinder(pivotRingRadius / 2, pivotHeight);
pivotMount = new Align(pivotMount, Face.Bottom, pivotHole, Face.Bottom, offsetZ: .02);
totalMount = pivotMount;
CsgObject holdArm = new Box(armLength, wallWidth * 2, wallWidth);
holdArm = new Align(holdArm, Face.Left | Face.Front | Face.Bottom, pivotMount, Face.Left | Face.Front | Face.Bottom, offsetX: pivotRingRadius / 2);
totalMount += holdArm;
CsgObject switchMount = new Box(switchHeight, switchWidth, wallWidth);
switchMount -= new Translate(new Cylinder(switchHoleDiameter / 2, switchMount.ZSize + .1), new Vector3(0, switchHoleSeparation / 2, 0));
switchMount -= new Translate(new Cylinder(switchHoleDiameter / 2, switchMount.ZSize + .1), new Vector3(0, -switchHoleSeparation / 2, 0));
switchMount = new Align(switchMount, Face.Left | Face.Front | Face.Bottom, holdArm, Face.Right | Face.Front | Face.Bottom, offsetX: -.02, offsetY: -5);
totalMount += switchMount;
CsgObject magnetAttractor = new Box(wallWidth + magnetAttractorHoleRadius, magnetAttractorYSize, wallWidth * 3);
// align it from the pivot point
magnetAttractor = new Align(magnetAttractor, Face.Left | Face.Front | Face.Bottom, pivotMount, Face.Left | Face.Front | Face.Bottom, offsetX: magnetHoldOffset);
totalMount += magnetAttractor;
CsgObject bracingWall = new Box(wallWidth, wallWidth, pivotMount.ZSize - wallWidth);
bracingWall = new SetCenter(bracingWall, holdArm.GetCenter());
bracingWall = new Align(bracingWall, Face.Right | Face.Top, pivotMount, Face.Right | Face.Top);
totalMount += bracingWall;
CsgObject bracingArm = new Box(armLength - wireClearence, wallWidth, wallWidth);
bracingArm = new SetCenter(bracingArm, holdArm.GetCenter());
bracingArm = new Align(bracingArm, Face.Bottom | Face.Left, holdArm, Face.Top | Face.Left, offsetZ: -.1);
totalMount += bracingArm;
totalMount += Round.CreateFillet(bracingWall, Face.Right, bracingArm, Face.Top, 3);
totalMount += Round.CreateFillet(bracingArm, Face.Right, holdArm, Face.Top, wallWidth);
totalMount += Round.CreateFillet(holdArm, Face.Back, switchMount, Face.Left, wallWidth);
totalMount += Round.CreateFillet(holdArm, Face.Front, switchMount, Face.Left, wallWidth);
totalMount -= pivotHole;
CsgObject magnetAttractorHole = new Cylinder(magnetAttractorHoleRadius / 2, magnetAttractor.YSize + .1, Alignment.y);
magnetAttractorHole = new SetCenter(magnetAttractorHole, magnetAttractor.GetCenter() + new Vector3(0, 0, -magnetAttractorHoleRadius));
totalMount -= magnetAttractorHole;
CsgObject magnetAttractorHole2 = new Cylinder(magnetAttractorHoleRadius / 2, magnetAttractor.YSize + .1, Alignment.y);
magnetAttractorHole2 = new SetCenter(magnetAttractorHole2, magnetAttractor.GetCenter() + new Vector3(0, 0, magnetAttractorHoleRadius));
totalMount -= magnetAttractorHole2;
return(totalMount);
}
static CsgObject MountMount()
{
Vector3 magnetSize = new Vector3(10, 5, 2.5);
CsgObject total;
CsgObject baseBox = new Box(37, 26, wallWidth * 2);
Round baseBevels = new Round(baseBox.Size);
baseBevels.RoundEdge(Edge.LeftFront, 4);
baseBevels.RoundEdge(Edge.LeftBack, 4);
baseBox -= baseBevels;
CsgObject fakeXCarriage = new Translate(baseBox, 0.5);
total = fakeXCarriage;
double pivotRingYOffset = -pivotHeight / 2 - wallWidth / 2 - .5;
CsgObject pivotRingFront = new Cylinder(pivotRingRadius / 2, wallWidth, Alignment.y);
CsgObject pivotFrontWall = new Box(pivotRingRadius, wallWidth, mountPivotHeight);
pivotFrontWall = new Translate(pivotFrontWall, 0, 0, -mountPivotHeight / 2);
CsgObject pivotSupportFront = pivotRingFront + pivotFrontWall;
CsgObject pivotHole = new Cylinder(pivotHoleRadius / 2, pivotRingFront.YSize + .1, Alignment.y);
pivotHole = new SetCenter(pivotHole, pivotRingFront.GetCenter());
pivotSupportFront -= pivotHole;
pivotSupportFront = new Translate(pivotSupportFront, 0, pivotRingYOffset, mountPivotHeight);
pivotSupportFront += Round.CreateFillet(pivotSupportFront, Face.Back, fakeXCarriage, Face.Top, 3);
pivotSupportFront += Round.CreateFillet(pivotSupportFront, Face.Front, fakeXCarriage, Face.Top, 3);
total += pivotSupportFront;
CsgObject pivotSupportBack = pivotSupportFront.NewMirrorAccrossY();
total += pivotSupportBack;
CsgObject backMagnetHolder = new Box(wallWidth * 2, magnetSize.x + wallWidth, backMagnetHeight);
backMagnetHolder = new Align(backMagnetHolder, Face.Bottom | Face.Right, fakeXCarriage, Face.Top | Face.Right, 0, 0, -.1);
CsgObject backMagnetHole = new Box(magnetSize.z, magnetSize.x, magnetSize.y);
backMagnetHole = new SetCenter(backMagnetHole, backMagnetHolder.GetCenter());
backMagnetHole = new Align(backMagnetHole, Face.Left | Face.Top, backMagnetHolder, Face.Left | Face.Top, -.1, 0, -wallWidth / 2);
total += Round.CreateFillet(backMagnetHolder, Face.Front, fakeXCarriage, Face.Top, 3);
total += Round.CreateFillet(backMagnetHolder, Face.Back, fakeXCarriage, Face.Top, 3);
total += Round.CreateFillet(backMagnetHolder, Face.Left, fakeXCarriage, Face.Top, 3);
backMagnetHolder -= backMagnetHole;
total += backMagnetHolder;
CsgObject baseMagnetHolder = new Box(wallWidth * 2, magnetSize.x + wallWidth, baseMagnetHeight);
baseMagnetHolder = new Align(baseMagnetHolder, Face.Bottom, fakeXCarriage, Face.Top, -14, 0, -.1);
CsgObject baseMagnetHole = new Box(magnetSize.y, magnetSize.x, magnetSize.z);
baseMagnetHole = new SetCenter(baseMagnetHole, baseMagnetHolder.GetCenter());
baseMagnetHole = new Align(baseMagnetHole, Face.Top, baseMagnetHolder, Face.Top, 0, 0, .1);
baseMagnetHolder -= baseMagnetHole;
total += baseMagnetHolder;
return(total);
}