//private static void AppendBeam(ref List<BoxBeam> res, Line LineStart, Line[] LinesEnd,int[] bmNums, double deltSt, double[] deltEd, double StartC2C, double EndC2C,
// double[] Side)
//{
// BoxBeam cc;
// Vector2 stend=new Vector2(), edend=new Vector2();
// Vector2 stpin, edpin;
// Vector2 Cdir0 = LineStart.Direction.Convert2D();
// Cdir0.Normalize();
// Vector2 Cdir1 = LinesEnd[0].Direction.Convert2D();
// Cdir1.Normalize();
// Vector2 BeamDir;
// Vector2D BeamAxis;
// for (int i = 0; i < bmNums[0]; i++)
// {
// stend = LineStart.StartPoint.Convert2D() + Cdir0 * Side[0] + Cdir0 * (i) * deltSt;
// edend = LinesEnd[0].StartPoint.Convert2D() + Cdir1 * Side[0] + Cdir1 * (i) * deltEd[0];
// BeamDir = edend - stend;
// BeamDir.Normalize();
// stpin = stend + BeamDir * StartC2C;
// edpin = edend - BeamDir * EndC2C;
// BeamAxis = (edpin - stpin).Convert2DS();
// double startA = 90 - Cdir0.Convert2DS().SignedAngleTo(BeamAxis).Degrees;
// double endA = 90 - Cdir1.Convert2DS().SignedAngleTo(BeamAxis).Degrees;
// cc = new BoxBeam(stpin.Convert3D().Convert3DS(0, 0, 0), edpin.Convert3D().Convert3DS(0, 0, 0), 0, 0, 0.5, 0.5, startA, endA, false, 0);
// cc.ID = i;
// res.Add(cc);
// }
// for (int i = 0; i < bmNums[1]; i++)
// {
// stend = stend + Cdir0 * deltSt;
// edend = LinesEnd[1].StartPoint.Convert2D() + Cdir1 * Side[2] + Cdir1 * (i) * deltEd[1];
// BeamDir = edend - stend;
// BeamDir.Normalize();
// stpin = stend + BeamDir * StartC2C;
// edpin = edend - BeamDir * EndC2C;
// BeamAxis = (edpin - stpin).Convert2DS();
// double startA = 90 - Cdir0.Convert2DS().SignedAngleTo(BeamAxis).Degrees;
// double endA = 90 - Cdir1.Convert2DS().SignedAngleTo(BeamAxis).Degrees;
// cc = new BoxBeam(stpin.Convert3D().Convert3DS(0, 0, 0), edpin.Convert3D().Convert3DS(0, 0, 0), 0, 0, 0.5, 0.5, startA, endA, false, 0);
// cc.ID = i;
// res.Add(cc);
// }
//}
/// <summary>
/// 向列表添加一孔梁
/// </summary>
/// <param name="res">列表</param>
/// <param name="LineStart">起点线</param>
/// <param name="LineEnd">终点线</param>
/// <param name="beamNum">梁片数</param>
/// <param name="deltSt">起点间距</param>
/// <param name="deltEd">终点间距</param>
/// <param name="StartC2C">起点支座跨径距</param>
/// <param name="EndC2C">终点支座跨径距</param>
/// <param name="Side">边梁边距</param>
/// <param name="StartCL">起点设计线</param>
/// <param name="EndCL">终点设计线</param>
private static void AppendBeam(ref List <BoxBeam> res, Line LineStart, Line LineEnd,
int beamNum, double deltSt, double deltEd, double StartC2C, double EndC2C, double SideSt, double SideEd,
ref Align StartCL, ref Align EndCL
)
{
BoxBeam cc;
Vector2 stend, edend;
Vector2 stpin, edpin;
for (int i = 0; i < beamNum; i++)
{
Vector2 Cdir0 = LineStart.Direction.Convert2D();
Cdir0.Normalize();
Vector2 Cdir1 = LineEnd.Direction.Convert2D();
Cdir1.Normalize();
stend = LineStart.StartPoint.Convert2D() + Cdir0 * SideSt + Cdir0 * (i) * deltSt;
edend = LineEnd.StartPoint.Convert2D() + Cdir1 * SideEd + Cdir1 * (i) * deltEd;
Vector2 BeamDir = edend - stend;
BeamDir.Normalize();
Vector2D BeamAxis = (edend - stend).Convert2DS();
double startA = 90 - Cdir0.Convert2DS().SignedAngleTo(BeamAxis).Degrees;
double endA = 90 - Cdir1.Convert2DS().SignedAngleTo(BeamAxis).Degrees;
stpin = stend + BeamDir * StartC2C / Math.Cos((startA) / 180.0 * Math.PI);
edpin = edend - BeamDir * EndC2C / Math.Cos((endA) / 180.0 * Math.PI);
//var VecSt = (stpin.Convert2DS() - new Vector2D(Left0.StartPoint.X, Left0.StartPoint.Y));
//var VecEd = (edpin.Convert2DS() - new Vector2D(Left1.StartPoint.X, Left1.StartPoint.Y));
//增加桥面横坡值
double StartDeckHp = StartCL.GetSurfaceHP(stend.X, stend.Y);
double EndDeckHp = EndCL.GetSurfaceHP(edend.X, edend.Y);
double StPK = StartCL.curPQX.GetStationNew(stend.X, stend.Y);
double EdPK = EndCL.curPQX.GetStationNew(edend.X, edend.Y);
if (StartCL.curCG.GetHP(StPK)[0] == 2.5 && StartCL.curCG.GetHP(StPK)[1] == -2.5)
{
if (StartCL.GetSurfaceDist(stend.X, stend.Y) <= 0.5)
{
StartDeckHp = 0.0;
}
}
if (EndCL.curCG.GetHP(EdPK)[0] == 2.5 && EndCL.curCG.GetHP(EdPK)[1] == -2.5)
{
if (EndCL.GetSurfaceDist(edend.X, edend.Y) <= 0.5)
{
EndDeckHp = 0.0;
}
}
double NominalHP = 0.5 * (StartDeckHp + EndDeckHp);
//
cc = new BoxBeam(stpin.Convert3D().Convert3DS(0, 0, 0), edpin.Convert3D().Convert3DS(0, 0, 0),
0, 0, 0.5, 0.5, startA, endA, false, NominalHP);
cc.ID = i;
#region 判断梁类别编号
string typestr = "BE";
if (cc.Length2D <= 20)
{
typestr += "05";
}
else if (cc.Length2D <= 27.0)
{
typestr += "01";
}
else if (cc.Length2D <= 31.5)
{
if (Math.Abs(startA) >= 29)
{
typestr += "03";
}
else
{
typestr += "02";
}
}
else if (cc.Length2D <= 38.0)
{
typestr += "04";
}
else
{
typestr += "99";
}
if (i == 0 || i == beamNum - 1)
{
if (Math.Max(SideSt, SideEd) < NormalSide)
{
typestr += "D";
}
else
{
typestr += "A";
}
}
else
{
if (beamNum >= 7)
{
if (Math.Abs(NominalHP) <= 1.0)
{
typestr += "C";
}
else
{
typestr += "B";
}
}
else
{
typestr += "B";
}
}
cc.BeamType = typestr;
#endregion
res.Add(cc);
}
var tst = (from a in res select a.BeamType.Substring(0, 4)).ToList().Distinct().ToList();
if (tst.Count != 1 && tst.Contains("BE04"))
{
for (int i = 0; i < res.Count; i++)
{
string part = res[i].BeamType.Substring(2, 2);
res[i].BeamType = res[i].BeamType.Replace(part, "04");
}
}
// 增加s型加强02梁
if (res[0].BeamType[3] == '2')
{
if (res.Count == 3)
{
res[1].BeamType = "BE02Bs";
}
else if (res.Count >= 4)
{
if (Math.Max(deltEd, deltSt) > 2.4 + 0.85)
{
res[1].BeamType = "BE02Bs";
res[res.Count - 2].BeamType = "BE02Bs";
}
}
}
// 增加s型加强01梁
else if (res[0].BeamType[3] == '1')
{
if (res.Count == 3)
{
res[1].BeamType = "BE01Bs";
}
else if (res.Count >= 4)
{
if (Math.Max(deltEd, deltSt) > 2.4 + 0.85)
{
res[1].BeamType = "BE01Bs";
res[res.Count - 2].BeamType = "BE01Bs";
}
}
}
}