//Case 1094: 1.3.7_WorkFlow_ImportDICOMImage+GetPresentationStateInfo_RadioLogInformation
public void Run_PS_ImportDicom_RadioLog_Case1094()
{
//int runCount = this.Input.Repetition;
int runCount = 0; // this is the initial run count. Use this count to repeat different test data set.
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), "Test round");
//Mark the check point here to indicate what's the check point here
CheckPoint p1 = new CheckPoint("createPatient", "Setup environment of createPatient");
CheckPoint p2 = new CheckPoint("importObject", "Setup environment of importObject");
CheckPoint p3 = new CheckPoint("getImageInfo", "Test getImageInfo");
CheckPoint p4 = new CheckPoint("getPresentationStateInfo", "Test getPresentationStateInfo");
r.CheckPoints.Add(p1);
r.CheckPoints.Add(p2);
r.CheckPoints.Add(p3);
r.CheckPoints.Add(p4);
//create required PAS service instaces here
PatientService pats = new PatientService();
ImportService ims = new ImportService();
ImageService img = new ImageService();
PresentationStateService ps = new PresentationStateService();
//create input parameters here, it may include XML path type and string type value
XMLParameter pa1 = new XMLParameter("patient");
XMLParameter pa2 = new XMLParameter("importObject");
XMLParameter pa3 = new XMLParameter("image");
XMLParameter ps4 = new XMLParameter("presentationstate");
XMLParameterCollection pa4 = new XMLParameterCollection();
try
{
for (int i = 0; i < ids.InputParameters.Count; i++)
{
switch (ids.InputParameters.GetParameter(i).Step)
{
case "createPatient":
pa1.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "importObject":
pa2.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
default:
Console.WriteLine("There is no valid selection when parse input parameters.");
break;
}
}
//If we need change parameter by specific logic, please put code here
//Get service result
//Step1 result
XMLResult step1_result = pats.createPatient(pa1);
//Log step1 service output
if (step1_result.IsErrorOccured)
{
p1.Result = TestResult.Fail;
p1.Outputs.AddParameter("Step 1: createPatient", "Error", step1_result.ResultContent);
SaveRound(r);
continue;
}
p1.Result = TestResult.Pass;
p1.Outputs.AddParameter("Step 1: createPatient", "Success", step1_result.ResultContent);
//Change input parameter according the output of Step1
pa2.AddParameter("patientInternalId", step1_result.SingleResult);
//Step2 result
//if objectFileFullPath is empty string, skip step2
if (pa2.GetParameterValueByName("objectFileFullPath") != null && pa2.GetParameterValueByName("objectFileFullPath") != "")
{
XMLResult step2_result = ims.importObject(pa2.GetParameterValueByName("patientInternalId"), "", pa2.GetParameterValueByName("objectFileFullPath"), "", false, "");
//Log step2 service output
if (step2_result.IsErrorOccured)
{
p2.Result = TestResult.Fail;
p2.Outputs.AddParameter("Step 2: importObject", "Error", step2_result.ResultContent);
SaveRound(r);
continue;
}
p2.Result = TestResult.Pass;
p2.Outputs.AddParameter("Step 2: importObject", "Success", step2_result.ResultContent);
//Change input parameter according the output of Step2
// if step2 is skipped, step3 input has no need parameter of internal_id
for (int i = 0; i < step2_result.MultiResults.Count; i++)
{
if (step2_result.MultiResults[i].Name == "image")
{
pa3.AddParameter("internal_id", step2_result.MultiResults[i].GetParameterValueByIndex(i));
}
if (step2_result.MultiResults[i].Name == "presentationstate")
{
pa4.Add(step2_result.MultiResults[i]);
}
}
}
//Step3 result
XMLResult step3_result = img.getImageInfo(pa3);
if (step3_result.IsErrorOccured)
{
p3.Result = TestResult.Fail;
p3.Outputs.AddParameter("Step 3: getImageInfo", "The call 'getImageInfo' returns error: ", step3_result.Message);
SaveRound(r);
continue;
}
else
{
p3.Result = TestResult.Pass; // Assume test pass at first, check the details later to update this
}
//Log step3 service output
int expectedParameterCount = 0;
for (int index = 0; index < ids.ExpectedValues.Parameters.Count; index++)
{
if (ids.ExpectedValues.Parameters[index].Step == "getImageInfo")
{
expectedParameterCount++;
}
}
string dicom_info_getImageInfo = step3_result.DicomArrayResult.GetParameterValueByName("dicom_info");
for (int index = 0; index < ids.ExpectedValues.Parameters.Count; index++)
{
if (ids.ExpectedValues.Parameters[index].Step == "getImageInfo")
{
// The dicom_info in return does not match the expected key and value
if (false == dicom_info_getImageInfo.Contains("<parameter key=\"" + ids.ExpectedValues.Parameters[index].Key + "\" value=\"" + ids.ExpectedValues.Parameters[index].Value + "\" />"))
{
p3.Result = TestResult.Fail;
p3.Outputs.AddParameter("Step 3: getImageInfo", "Error: the expect value does not match: " + ids.ExpectedValues.Parameters[index].Key + ". Actually get dicom_Info: ", dicom_info_getImageInfo);
break;
}
}
}
if (p3.Result == TestResult.Pass)
{
p3.Outputs.AddParameter("Step 3: getImageInfo", "The dicom info all match the expected value", dicom_info_getImageInfo);
}
//Step4 result
XMLResult step4_result = ps.getPresentationStateInfo(pa4);
if (step4_result.IsErrorOccured)
{
p4.Result = TestResult.Fail;
p4.Outputs.AddParameter("Step 4: getPresentationStateInfo", "The call 'getPresentationStateInfo' returns error: ", step4_result.Message);
SaveRound(r);
continue;
}
else
{
p4.Result = TestResult.Pass;
}
expectedParameterCount = 0; //count of expected parameters on getPresentationStateInfo
for (int index = 0; index < ids.ExpectedValues.Parameters.Count; index++)
{
if (ids.ExpectedValues.Parameters[index].Step == "getPresentationStateInfo")
{
expectedParameterCount++;
}
}
string dicom_info_getPSInfo = step4_result.DicomArrayResult.GetParameterValueByName("dicom_info");
for (int index = 0; index < ids.ExpectedValues.Parameters.Count; index++)
{
if (ids.ExpectedValues.Parameters[index].Step == "getPresentationStateInfo")
{
if (false == dicom_info_getPSInfo.Contains("<parameter key=\"" + ids.ExpectedValues.Parameters[index].Key + "\" value=\"" + ids.ExpectedValues.Parameters[index].Value + "\" />"))
{
p4.Result = TestResult.Fail;
p4.Outputs.AddParameter("Step 4: getPresentationStateInfo", "Error: the expect dicom value does not match: " + ids.ExpectedValues.Parameters[index].Key + ". Actually get dicom_Info: ", dicom_info_getPSInfo);
break;
}
}
}
if (p4.Result == TestResult.Pass)
{
p4.Outputs.AddParameter("Step 4: getPresentationStateInfo", "Success: the expect dicom value all match the expected", dicom_info_getPSInfo);
}
SaveRound(r);
}
catch (Exception ex)
{
CheckPoint cp = new CheckPoint();
r.CheckPoints.Add(cp);
cp.Outputs.AddParameter("Exception thrown", "Exception Message: ", ex.Message);
cp.Result = TestResult.Fail;
SaveRound(r);
}
}
//Save service log as xml file
Output();
}
//Case 926: 1.3.3_WorkFlow_N02_CreateDeleteGet
public void Run_RadioLogicalLog_WorkFlow_N02_CreateDeleteGet_Case926()
{
//int runCount = this.Input.Repetition;
int runCount = 0; // this is the initial run count. Use this count to repeat different test data set.
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), "Test round");
//Mark the check point here to indicate what's the check point here
CheckPoint p1 = new CheckPoint("createPatient", "Setup environment of createPatient");
CheckPoint p2 = new CheckPoint("createRadioLogEntry", "Setup environment of createRadioLogEntry");
CheckPoint p3 = new CheckPoint("deleteRadioLogEntry", "Test deleteRadioLogEntry");
CheckPoint p4 = new CheckPoint("getRadioLogEntry", "Test getRadioLogEntry");
r.CheckPoints.Add(p1);
r.CheckPoints.Add(p2);
r.CheckPoints.Add(p3);
r.CheckPoints.Add(p4);
//create required PAS service instaces here
PatientService pats = new PatientService();
RadiologService radios = new RadiologService();
//create input parameters here, it may include XML path type and string type value
XMLParameter pa1 = new XMLParameter("createPatient");
XMLParameter pa2 = new XMLParameter("createRadioLogEntry");
XMLParameter pa3 = new XMLParameter("deleteRadioLogEntry");
XMLParameter pa4 = new XMLParameter("getRadioLogEntry");
for (int i = 0; i < ids.InputParameters.Count; i++)
{
switch (ids.InputParameters.GetParameter(i).Step)
{
case "createPatient":
pa1.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "createRadioLogEntry":
pa2.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "deleteRadioLogEntry":
pa3.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "getRadioLogEntry":
pa4.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
default:
Console.WriteLine("There is no valid selection when parse input parameters.");
break;
}
}
//If we need change parameter by specific logic, please put code here
//Get service result
//Step1 result
XMLResult step1_result = pats.createPatient(pa1);
//Log step1 service output
if (step1_result.IsErrorOccured)
{
p1.Result = TestResult.Fail;
p1.Outputs.AddParameter("createPatient", "Error", step1_result.ResultContent);
SaveRound(r);
continue;
}
p1.Result = TestResult.Pass;
p1.Outputs.AddParameter("createPatient", "Success", step1_result.ResultContent);
//Change input parameter according the output of Step1
pa2.AddParameter("patient_internal_id", step1_result.SingleResult);
//Step2 result
XMLResult step2_result = radios.createRadioLogEntry(pa2);
//Log step2 service output
if (step2_result.IsErrorOccured)
{
p2.Result = TestResult.Fail;
p2.Outputs.AddParameter("createRadioLogEntry", "Error", step2_result.ResultContent);
SaveRound(r);
continue;
}
p2.Result = TestResult.Pass;
p2.Outputs.AddParameter("createRadioLogEntry", "Success", step2_result.ResultContent);
//Change input parameter according the output of Step2
pa3.AddParameter("radioLogEntryInternalId", step2_result.SingleResult);
pa4.AddParameter("radioLogEntryInternalId", step2_result.SingleResult);
//Step3 result
XMLResult step3_result = radios.deleteRadioLogEntry(pa3.GetParameterValueByName("radioLogEntryInternalId"));
//Log step3 service output
if (step3_result.IsErrorOccured)
{
p3.Result = TestResult.Fail;
p3.Outputs.AddParameter("deleteRadioLogEntry", "Error", step3_result.ResultContent);
SaveRound(r);
continue;
}
p3.Result = TestResult.Pass;
p3.Outputs.AddParameter("deleteRadioLogEntry", "Success", step3_result.ResultContent);
//Change input parameter according the output of Step3
//Step4 result
XMLResult step4_result = radios.getRadioLogEntry(pa4.GetParameterValueByName("radioLogEntryInternalId"));
//Log step4 service output
if (step4_result.Code.ToString() == ids.ExpectedValues.GetParameter("code").Value)
{
p4.Result = TestResult.Pass;
p4.Outputs.AddParameter("getRadioLogEntry", "Success", step4_result.ResultContent);
}
else
{
p4.Result = TestResult.Fail;
p4.Outputs.AddParameter("getRadioLogEntry", "Error", step4_result.ResultContent);
}
//Save data for each round
SaveRound(r);
}
//Save service log as xml file
Output();
}
//Case 1091: 1.3.7_WorkFlow_AcquireRVG+SetImageInfo+GetPresentationStateInfo_RadioLogInformation
public void Run_PS_Acq_Radiolog_Case1091()
{
//int runCount = this.Input.Repetition;
int runCount = 0; // this is the initial run count. Use this count to repeat different test data set.
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), "Test round");
//Mark the check point here to indicate what's the check point here
CheckPoint p1 = new CheckPoint("createPatient", "Setup environment of createPatient");
CheckPoint p2 = new CheckPoint("startAcquisition", "Setup environment of acquisition");
CheckPoint p3 = new CheckPoint("getAcquisitionResult", "Setup environment of image and PS id");
CheckPoint p4 = new CheckPoint("setImageInfo", "Setup environment of setImageInfo");
CheckPoint p5 = new CheckPoint("getImageInfo", "Test getImageInfo");
CheckPoint p6 = new CheckPoint("getPresentationStateInfo", "Test getPresentationStateInfo");
r.CheckPoints.Add(p1);
r.CheckPoints.Add(p2);
r.CheckPoints.Add(p3);
r.CheckPoints.Add(p4);
r.CheckPoints.Add(p5);
r.CheckPoints.Add(p6);
//create required PAS service instaces here
PatientService pats = new PatientService();
AcquisitionService acq = new AcquisitionService();
ImageService img = new ImageService();
PresentationStateService ps = new PresentationStateService();
//create input parameters here, it may include XML path type and string type value
XMLParameter pa1 = new XMLParameter("patient");
XMLParameter pa2 = new XMLParameter("acq_info");
XMLParameter pa3 = new XMLParameter("getAcquisitionResult");
XMLParameter pa4 = new XMLParameter("image");
XMLParameter pa5 = new XMLParameter("image");
XMLParameter pt6 = new XMLParameter("presentationstate");
XMLParameterCollection pa6 = new XMLParameterCollection();
try
{
for (int i = 0; i < ids.InputParameters.Count; i++)
{
switch (ids.InputParameters.GetParameter(i).Step)
{
case "createPatient":
pa1.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "acquire":
pa2.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "setImageInfo":
pa4.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
default:
Console.WriteLine("There is no valid selection when parse input parameters.");
break;
}
}
//If we need change parameter by specific logic, please put code here
//Get service result
//Step1 result
XMLResult step1_result = pats.createPatient(pa1);
//Log step1 service output
if (step1_result.IsErrorOccured)
{
p1.Result = TestResult.Fail;
p1.Outputs.AddParameter("createPatient", "Error", step1_result.ResultContent);
SaveRound(r);
continue;
}
p1.Result = TestResult.Pass;
p1.Outputs.AddParameter("createPatient", "Success", step1_result.ResultContent);
//Change input parameter according the output of Step1
pa2.AddParameter("patient_internal_id", step1_result.SingleResult);
//Step2 result
//if acquireType isn't emtpy string, skip step2, here is only RVG acquisition
bool acqflag = true;
XMLResult step3_result = new XMLResult();
if (pa2.GetParameterValueByName("acquireType") == null || pa2.GetParameterValueByName("acquireType") == "")
{
XMLResult rslAcqRVG = acq.startAcquisition(pa2);
System.Threading.Thread.Sleep(3000);
if (rslAcqRVG.IsErrorOccured)
{
System.Diagnostics.Debug.Print("Acquire fail:");
p2.Result = TestResult.Fail;
p2.Outputs.AddParameter("acquire", "Acquire image error", rslAcqRVG.Message);
}
else
{
p2.Result = TestResult.Pass;
p2.Outputs.AddParameter("acquire", "Acquire session ID", rslAcqRVG.SingleResult);
int DORVGcount = 0;
do
{
System.Threading.Thread.Sleep(3000);
System.Diagnostics.Debug.Print("get acquire in do");
DORVGcount++;
step3_result = acq.getAcquisitionResult(rslAcqRVG.SingleResult);
if (!step3_result.IsErrorOccured)
{
// move this to out of do-while loop as need check the return value is correct or not there
//p3.Result = TestResult.Pass;
//p3.Outputs.AddParameter("acquire", "Get acquire image", step3_result.Message);
acqflag = false;
break;
}
if (step3_result.Code != 501)
{
continue;
}
else
{
p3.Result = TestResult.Fail;
p3.Outputs.AddParameter("acquire", "Get acquire image error", step3_result.Message);
acqflag = false;
}
System.Diagnostics.Debug.Print("get acquireResult:" + DORVGcount);
if (DORVGcount > 60)
{
p3.Result = TestResult.Fail;
p3.Outputs.AddParameter("acquire", "Get acquire image error", "Acquire greate with 3 minutes, timeout!");
acqflag = false;
break;
}
} while (acqflag);
}
}
//Change input parameter according the output of Step3
// if step3 is skipped, step4,step5,setp6 input has no need parameter of internal_id
//2012-11-28/19006723: Chanege as ther getAcquisitionResult result change, need new way to get the image ID and PS ID
string imgInternalID = string.Empty;
string psInternalID = string.Empty;
ParseXMLContent parser = new ParseXMLContent(step3_result.ResultContent); // To parse the return XML
string imageID = parser.getStringWithPathAndType("trophy/object_info", "image", "value");
string[] imageIDs = imageID.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
int imageCount = imageIDs.Length;
string psID = parser.getStringWithPathAndType("trophy/object_info", "presentation_state", "value");
string[] psIDs = psID.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
int psCount = psIDs.Length;
if (imageCount == 1 && psCount == 1)
{
p3.Result = TestResult.Pass;
p3.Outputs.AddParameter("acquire", "getAcquisitionResult return OK", step3_result.ResultContent);
imgInternalID = imageIDs[0];
psInternalID = psIDs[0];
pa5.AddParameter("internal_id", imgInternalID);
pt6.AddParameter("internal_id", psInternalID);
}
else
{
p3.Result = TestResult.Fail;
p3.Outputs.AddParameter("acquire", "getAcquisitionResult return ERROR", step3_result.ResultContent);
SaveRound(r);
continue; // Not run below steps
}
//if (step3_result.MultiResults.Count > 0)
//{
// for (int j = 0; j < step3_result.MultiResults.Count; j++)
// {
// for (int i = 0; i < step3_result.MultiResults[j].Parameters.Count; i++)
// {
// if (step3_result.MultiResults[j].Parameters[i].ParameterName == "image_internal_id")
// {
// imgInternalID = step3_result.MultiResults[j].Parameters[i].ParameterValue;
// pa5.AddParameter("internal_id", step3_result.MultiResults[j].Parameters[i].ParameterValue);
// }
// if (step3_result.MultiResults[j].Parameters[i].ParameterName == "presentation_state_internal_id")
// {
// pt6.AddParameter("internal_id", step3_result.MultiResults[j].Parameters[i].ParameterValue);
// }
// }
// }
//}
//Step4 result
XMLResult step4_result = img.setImageInfo(pa4, imgInternalID);
//Log step4 service output
if (step4_result.IsErrorOccured)
{
p4.Result = TestResult.Fail;
p4.Outputs.AddParameter("setImageInfo", "Error", step4_result.ResultContent);
SaveRound(r);
continue;
}
p4.Result = TestResult.Pass;
p4.Outputs.AddParameter("setImageInfo", "Success", step4_result.ResultContent);
//Step5 result
XMLResult step5_result = img.getImageInfo(pa5);
//Log step3 service output
//Compare the Expected parameters of getImageInfo and output result of getImageInfo
//count of compare matched parameters
int compCount = 0;
//count of expected parameters on getImageInfo
int expectedParameterCount = 0;
for (int index = 0; index < ids.ExpectedValues.Parameters.Count; index++)
{
if (ids.ExpectedValues.Parameters[index].Step == "getImageInfo")
{
expectedParameterCount++;
}
}
for (int index = 0; index < ids.ExpectedValues.Parameters.Count; index++)
{
if (ids.ExpectedValues.Parameters[index].Step == "getImageInfo" && ids.ExpectedValues.Parameters[index].Value == step5_result.DicomArrayResult.GetParameterValueByName(ids.ExpectedValues.Parameters[index].Key))
{
compCount++;
}
}
if (step5_result.IsErrorOccured || compCount != expectedParameterCount)
{
p5.Result = TestResult.Fail;
p5.Outputs.AddParameter("getImageInfo", "Error", step5_result.ResultContent);
SaveRound(r);
continue;
}
p5.Result = TestResult.Pass;
p5.Outputs.AddParameter("getImageInfo", "Success", step5_result.ResultContent);
//Change input parameter according the output of Step6
//generate input parameter collection of step6
pa6.Add(pt6);
//Step6 result
XMLResult step6_result = ps.getPresentationStateInfo(pa6);
//Log step6 service output
//Compare the Expected parameters of getPresentationStateInfo and output result of getPresentationStateInfo
compCount = 0;
//count of expected parameters on getPresentationStateInfo
expectedParameterCount = 0;
for (int index = 0; index < ids.ExpectedValues.Parameters.Count; index++)
{
if (ids.ExpectedValues.Parameters[index].Step == "getPresentationStateInfo")
{ expectedParameterCount++; }
}
for (int index = 0; index < ids.ExpectedValues.Parameters.Count; index++)
{
if (ids.ExpectedValues.Parameters[index].Step == "getPresentationStateInfo" && ids.ExpectedValues.Parameters[index].Value == step6_result.DicomArrayResult.GetParameterValueByName(ids.ExpectedValues.Parameters[index].Key))
{ compCount++; }
}
if (step6_result.IsErrorOccured || compCount != expectedParameterCount)
{
p6.Result = TestResult.Fail;
p6.Outputs.AddParameter("getPresentationStateInfo", "Error", step6_result.ResultContent);
}
else
{
p6.Result = TestResult.Pass;
p6.Outputs.AddParameter("getPresentationStateInfo", "Success", step6_result.ResultContent);
}
//Save data for each round
SaveRound(r);
}
catch (Exception ex)
{
CheckPoint p = new CheckPoint("Excepption", "Exception thrown when case run: "+ex.ToString());
r.CheckPoints.Add(p);
SaveRound(r);
}
}
//Save service log as xml file
Output();
}
//Case 925: 1.3.3_WorkFlow_N01_CreateGet
public void Run_RadioLogicalLog_WorkFlow_N01_CreateGet_Case925()
{
//int runCount = this.Input.Repetition;
int runCount = 0; // this is the initial run count. Use this count to repeat different test data set.
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), "Test round");
//Mark the check point here to indicate what's the check point here
CheckPoint p1 = new CheckPoint("createPatient", "Setup environment of createPatient");
CheckPoint p2 = new CheckPoint("importObject", "Setup environment of importObject");
CheckPoint p3 = new CheckPoint("createRadioLogEntry", "Test createRadioLogEntry");
CheckPoint p4 = new CheckPoint("getRadioLogEntry", "Test getRadioLogEntry");
r.CheckPoints.Add(p1);
r.CheckPoints.Add(p2);
r.CheckPoints.Add(p3);
r.CheckPoints.Add(p4);
//create required PAS service instaces here
PatientService pats = new PatientService();
ImportService ims = new ImportService();
RadiologService radios = new RadiologService();
//create input parameters here, it may include XML path type and string type value
XMLParameter pa1 = new XMLParameter("createPatient");
XMLParameter pa2 = new XMLParameter("importObject");
XMLParameter pa3 = new XMLParameter("createRadioLogEntry");
XMLParameter pa4 = new XMLParameter("getRadioLogEntry");
for (int i = 0; i < ids.InputParameters.Count; i++)
{
switch (ids.InputParameters.GetParameter(i).Step)
{
case "createPatient":
pa1.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "importObject":
pa2.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "createRadioLogEntry":
pa3.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "getRadioLogEntry":
pa4.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
default:
Console.WriteLine("There is no valid selection when parse input parameters.");
break;
}
}
//If we need change parameter by specific logic, please put code here
//Get service result
//Step1 result
XMLResult step1_result = pats.createPatient(pa1);
//Log step1 service output
if (step1_result.IsErrorOccured)
{
p1.Result = TestResult.Fail;
p1.Outputs.AddParameter("createPatient", "Error", step1_result.ResultContent);
SaveRound(r);
continue;
}
p1.Result = TestResult.Pass;
p1.Outputs.AddParameter("createPatient", "Success", step1_result.ResultContent);
//Change input parameter according the output of Step1
pa2.AddParameter("patientInternalId", step1_result.SingleResult);
pa3.AddParameter("patient_internal_id", step1_result.SingleResult);
//Step2 result
//if objectFileFullPath is empty string, skip step2
if (pa2.GetParameterValueByName("objectFileFullPath") != null && pa2.GetParameterValueByName("objectFileFullPath") != "")
{
XMLResult step2_result = ims.importObject(pa2.GetParameterValueByName("patientInternalId"), "", pa2.GetParameterValueByName("objectFileFullPath"), "", false, "");
//Log step2 service output
if (step2_result.IsErrorOccured)
{
p2.Result = TestResult.Fail;
p2.Outputs.AddParameter("importObject", "Error", step2_result.ResultContent);
SaveRound(r);
continue;
}
p2.Result = TestResult.Pass;
p2.Outputs.AddParameter("importObject", "Success", step2_result.ResultContent);
//Change input parameter according the output of Step2
// if step2 is skipped, step3 input has no need parameter of instance_internal_id
pa3.AddParameter("instance_internal_id", step2_result.ArrayResult.GetParameterValueByName("internal_id"));
}
else
{
p2.Outputs.AddParameter("importObject", "Success", "This step is ignored by case, no run");
p2.Result = TestResult.Pass;
}
//Step3 result
XMLResult step3_result = radios.createRadioLogEntry(pa3);
//Log step3 service output
if (step3_result.IsErrorOccured)
{
p3.Result = TestResult.Fail;
p3.Outputs.AddParameter("createRadioLogEntry", "Error", step3_result.ResultContent);
SaveRound(r);
continue;
}
p3.Result = TestResult.Pass;
p3.Outputs.AddParameter("createRadioLogEntry", "Success", step3_result.ResultContent);
//Change input parameter according the output of Step3
pa4.AddParameter("radioLogEntryInternalId", step3_result.SingleResult);
//Step4 result
XMLResult step4_result = radios.getRadioLogEntry(pa4.GetParameterValueByName("radioLogEntryInternalId"));
//Log step4 service output
//Compare the input parameters of createRadioLogEntry and output result of getRadioLogEntry
int compCount = 0;
for (int index = 0; index < ids.ExpectedValues.Parameters.Count; index++)
{
if (ids.ExpectedValues.Parameters[index].Value == step4_result.ArrayResult.GetParameterValueByName(ids.ExpectedValues.Parameters[index].Key))
{ compCount++; }
}
if (step4_result.IsErrorOccured || compCount != ids.ExpectedValues.Parameters.Count)
{
p4.Result = TestResult.Fail;
p4.Outputs.AddParameter("getRadioLogEntry", "Error", step4_result.ResultContent);
}
else
{
p4.Result = TestResult.Pass;
p4.Outputs.AddParameter("getRadioLogEntry", "Success", step4_result.ResultContent);
}
//Save data for each round
SaveRound(r);
}
//Save service log as xml file
Output();
}
