protected void LookAtLastLevel()
    {
        MadGUI.PropertyField(lookAtLastLevel, "Look At Previous Level", "When scene is loaded, it will automatically "
                             + "go to the previously played level (but only if previous scene is of type Level.");

        GUILayout.Label("If above is disabled or cannot be determined, then...");

        MadGUI.PropertyFieldEnumPopup(lookAtLevel, "Look At Level");
    }
    public override void OnInspectorGUI()
    {
        serializedObject.UpdateIfDirtyOrScript();

        MadGUI.PropertyField(animationName, "Animation TypeID");
        EditorGUILayout.Space();

        DrawInspector();
        EditorGUILayout.Space();

        MadGUI.PropertyField(duration, "Duration");
        MadGUI.PropertyField(delay, "Delay");
        MadGUI.PropertyFieldSlider(offset, 0, 1, "Offset");
        EditorGUILayout.Space();

        MadGUI.PropertyField(useAnimationCurve, "Use Animation Curve");
        using (MadGUI.Indent()) {
            if (!useAnimationCurve.boolValue)
            {
                MadGUI.PropertyFieldEnumPopup(easing, "Easing");
            }
            else
            {
                MadGUI.PropertyField(animationCurve, "Curve");
            }
        }
        MadGUI.PropertyFieldEnumPopup(wrapMode, "Wrap Mode");
        MadGUI.PropertyField(queue, "Queue");
        EditorGUILayout.Space();

        MadGUI.PropertyField(playOnAwake, "Play On Awake");
        MadGUI.PropertyField(destroyObjectOnFinish, "Destroy On Finish");
        MadGUI.PropertyField(sendMessageOnFinish, "Send Message On Finish");

        if (sendMessageOnFinish.boolValue)
        {
            using (MadGUI.Indent()) {
                MadGUI.PropertyField(messageReceiver, "Receiver", MadGUI.ObjectIsSet);
                MadGUI.PropertyField(messageName, "Method TypeID", MadGUI.StringNotEmpty);
            }
        }

        MadGUI.PropertyField(playAnimationOnFinish, "Play Animation On Finish");

        if (playAnimationOnFinish.boolValue)
        {
            using (MadGUI.Indent()) {
                MadGUI.PropertyField(playAnimationOnFinishName, "TypeID", MadGUI.StringNotEmpty);
                MadGUI.PropertyField(playAnimationOnFinishFromTheBeginning, "From The Beginning");
            }
        }

        MadGUI.PropertyField(ignoreTimeScale, "Ignore Time Scale");

        serializedObject.ApplyModifiedProperties();
    }
 private void GUIStartupProperty(SerializedProperty method, SerializedProperty value, string label)
 {
     MadGUI.PropertyFieldEnumPopup(method, label);
     if (method.enumValueIndex != (int)MadLevelAnimator.ApplyMethod.DoNotChange)
     {
         using (MadGUI.Indent()) {
             MadGUI.PropertyField(value, "");
             EditorGUILayout.Space();
         }
     }
 }
    protected void HandleMobileBack()
    {
        MadGUI.PropertyField(handleMobileBackButton, "Handle Mobile 'Back'",
                             "Handles mobile 'back' action by loading selected level.");
        MadGUI.Indent(() => {
            MadGUI.PropertyFieldEnumPopup(handleMobileBackButtonAction, "Action");

            if (s.handleMobileBackButtonAction == MadLevelAbstractLayout.OnMobileBack.LoadSpecifiedLevel)
            {
                MadGUI.Indent(() => {
                    MadGUI.PropertyField(handleMobileBackButtonLevelName, "Level Name", MadGUI.StringNotEmpty);
                });
            }
        });
    }
    public override void OnInspectorGUI()
    {
        serializedObject.UpdateIfDirtyOrScript();

        MadGUI.PropertyField(dragBounds, "Drag Area");

        EditorGUILayout.Space();

        MadGUI.ConditionallyEnabled(HasBackground(), () => {
            if (MadGUI.Button("Resize Drag Area To Background", Color.yellow))
            {
                ResizeDragAreaToBackground();
            }
        });

        EditorGUILayout.Space();

        MadGUI.PropertyFieldEnumPopup(scaleMode, "Allow Scaling");
        MadGUI.ConditionallyEnabled(script.scaleMode == MadFreeDraggable.ScaleMode.Free, () => {
            MadGUI.Indent(() => {
                MadGUI.PropertyField(scalingMin, "Scaling Min");
                MadGUI.PropertyField(scalingMax, "Scaling Max");
            });
        });

        EditorGUILayout.Space();

        MadGUI.PropertyField(moveEasing, "Move Easing");
        MadGUI.ConditionallyEnabled(moveEasing.boolValue, () => {
            MadGUI.Indent(() => {
                MadGUI.PropertyField(moveEasingType, "Type");
                MadGUI.PropertyField(moveEasingDuration, "Duration");
            });
        });

        EditorGUILayout.Space();

        MadGUI.PropertyField(scaleEasing, "Scale Easing");
        MadGUI.ConditionallyEnabled(scaleEasing.boolValue, () => {
            MadGUI.Indent(() => {
                MadGUI.PropertyField(scaleEasingType, "Type");
                MadGUI.PropertyField(scaleEasingDuration, "Duration");
            });
        });

        serializedObject.ApplyModifiedProperties();
    }
示例#6
0
    protected override void DrawInspector()
    {
        MadGUI.PropertyFieldEnumPopup(moveFrom, "From");

        if (moveFrom.enumValueIndex >= 2)
        {
            using (MadGUI.Indent()) {
                MadGUI.PropertyField(moveFromPosition, "Position");
            }
        }

        MadGUI.PropertyFieldEnumPopup(moveTo, "To");

        if (moveTo.enumValueIndex >= 2)
        {
            using (MadGUI.Indent()) {
                MadGUI.PropertyField(moveToPosition, "Position");
            }
        }
    }
    protected override void DrawInspector()
    {
        MadGUI.PropertyFieldEnumPopup(rotateFrom, "From");

        if (rotateFrom.enumValueIndex >= 2)
        {
            using (MadGUI.Indent()) {
                MadGUI.PropertyField(rotateFromValue, "Value");
            }
        }

        MadGUI.PropertyFieldEnumPopup(rotateTo, "To");

        if (rotateTo.enumValueIndex >= 2)
        {
            using (MadGUI.Indent()) {
                MadGUI.PropertyField(rotateToValue, "Value");
            }
        }
    }
    protected override void DrawInspector()
    {
        MadGUI.PropertyFieldEnumPopup(colorFrom, "From");

        if (colorFrom.enumValueIndex == (int)MadAnimColor.ValueType.Value)
        {
            using (MadGUI.Indent()) {
                MadGUI.PropertyField(colorFromValue, "Value");
            }
        }

        MadGUI.PropertyFieldEnumPopup(colorTo, "To");

        if (colorTo.enumValueIndex == (int)MadAnimColor.ValueType.Value)
        {
            using (MadGUI.Indent()) {
                MadGUI.PropertyField(colorToValue, "Value");
            }
        }
    }
    protected void LoadLevel()
    {
        MadGUI.PropertyFieldEnumPopup(loadLevel, "Load Level...");

        switch (s.loadLevel)
        {
        case MadLevelAbstractLayout.LoadLevel.Immediately:
            // do nothing
            break;

        case MadLevelAbstractLayout.LoadLevel.WithDelay:
            using (MadGUI.Indent()) {
                MadGUI.PropertyField(loadLevelLoadLevelDelay, "Delay");
                if (loadLevelLoadLevelDelay.floatValue < 0)
                {
                    loadLevelLoadLevelDelay.floatValue = Mathf.Max(0, loadLevelLoadLevelDelay.floatValue);
                }
            }
            break;

        case MadLevelAbstractLayout.LoadLevel.SendMessage:
            using (MadGUI.Indent()) {
                MadGUI.Info("By choosing this option you are responsible for loading the level. "
                            + "Activated MadLevelIcon will be passed as message argument.");

                MadGUI.PropertyField(loadLevelMessageReceiver, "Receiver", MadGUI.ObjectIsSet);
                MadGUI.PropertyField(loadLevelMessageName, "Method Name", MadGUI.StringNotEmpty);
                MadGUI.PropertyField(loadLevelMessageIncludeChildren, "Include Children");
            }
            break;

        case MadLevelAbstractLayout.LoadLevel.DoNotLoad:
            // do nothing
            break;

        default:
            Debug.LogError("Unknown option: " + s.loadLevel);
            break;
        }
    }
    private void GUIModifier(SerializedProperty modifierProperty)
    {
        var animationName = modifierProperty.FindPropertyRelative("animationName");

        var modifierFunction = modifierProperty.FindPropertyRelative("modifierFunction");
        var baseOperator     = modifierProperty.FindPropertyRelative("baseOperator");
        var firstParameter   = modifierProperty.FindPropertyRelative("firstParameter");
        var valueOperator    = modifierProperty.FindPropertyRelative("valueOperator");
        var secondParameter  = modifierProperty.FindPropertyRelative("secondParameter");


        //var function = modifierProperty.FindPropertyRelative("modifierFunction");
        //var method = modifierProperty.FindPropertyRelative("method");

        GUIAnimationName(animationName);
        MadGUI.PropertyFieldEnumPopup(modifierFunction, "Function");
        if (modifierFunction.enumValueIndex == (int)MadLevelAnimator.Modifier.ModifierFunc.Predefined)
        {
            MadGUI.PropertyFieldEnumPopup(baseOperator, "Base Operator");

            using (MadGUI.Indent()) {
                EditorGUILayout.LabelField("Expression");

                EditorGUILayout.BeginHorizontal();
                MadGUI.PropertyFieldEnumPopup(firstParameter, "", GUILayout.Width(150));
                //MadGUI.LookLikeControls(0, 0);
                MadGUI.PropertyFieldEnumPopup(valueOperator, "", GUILayout.Width(100));
                EditorGUILayout.PropertyField(secondParameter, new GUIContent(""), GUILayout.Width(80));
                //MadGUI.LookLikeControls(0);
                EditorGUILayout.EndHorizontal();
            }

            EditorGUILayout.Space();
        }



        //MadGUI.PropertyFieldEnumPopup(function, "Function");
        //MadGUI.PropertyFieldEnumPopup(method, "Method");
    }
    protected void TwoStepActivation()
    {
        MadGUI.PropertyFieldEnumPopup(twoStepActivationType, "Two Step Activation");
        MadGUI.ConditionallyEnabled(
            twoStepActivationType.enumValueIndex != (int)MadLevelAbstractLayout.TwoStepActivationType.Disabled, () => {
            MadGUI.Indent(() => {
                if (MadGUI.Foldout("On Activate", false))
                {
                    MadGUI.Indent(() => {
                        ActivateAction(
                            onIconActivatePlayAudio,
                            onIconActivatePlayAudioClip,
                            onIconActivatePlayAudioVolume,
                            onIconActivateMessage,
                            onIconActivateMessageReceiver,
                            onIconActivateMessageMethodName,
                            onIconActivateMessageIncludeChildren
                            );
                    });
                }

                if (MadGUI.Foldout("On Deactivate", false))
                {
                    MadGUI.Indent(() => {
                        ActivateAction(
                            onIconDeactivatePlayAudio,
                            onIconDeactivatePlayAudioClip,
                            onIconDeactivatePlayAudioVolume,
                            onIconDeactivateMessage,
                            onIconDeactivateMessageReceiver,
                            onIconDeactivateMessageMethodName,
                            onIconDeactivateMessageIncludeChildren
                            );
                    });
                }
            });
        });
    }
    public override void OnInspectorGUI()
    {
        serializedObject.UpdateIfDirtyOrScript();

        MadGUI.BeginBox("Test Mode");
        using (MadGUI.Indent()) {
            MadGUI.PropertyField(testMode, "Enabled");
            var ignoreObject = GameObject.Find("/_mlm_ignore");

            if (testMode.boolValue && ignoreObject == null)
            {
                new GameObject("_mlm_ignore");
            }
            else if (!testMode.boolValue && ignoreObject != null)
            {
                DestroyImmediate(ignoreObject);
            }

            MadGUI.PropertyField(testLevelToLoad, "Load Level");
        }
        MadGUI.EndBox();

        MadGUI.BeginBox("Loading");
        using (MadGUI.Indent()) {
            MadGUI.PropertyFieldEnumPopup(loadingMethod, "Method");
            MadGUI.PropertyField(delayLoadingSeconds, "Delay");
            MadGUI.PropertyField(loadingBar, "Loading Bar", ValidateLoadingBar);
            if (!ValidateLoadingBar(loadingBar))
            {
                MadGUI.Error("Attached object does not have MadSprite, UISprite (NGUI) or Image (uGUI) component. " +
                             "Please make sure that you've assigned a valid game object.");
            }

            using (MadGUI.Indent()) {
                MadGUI.PropertyField(loadingBarSmooth, "Smooth");
                using (MadGUI.EnabledIf(loadingBarSmooth.boolValue)) {
                    MadGUI.PropertyField(loadingBarSmoothSpeed, "Smooth Speed");
                    MadGUI.PropertyField(waitForBarToFillUp, "Wait To Fill Up");
                }
            }
        }
        MadGUI.EndBox();

        MadGUI.BeginBox("When Loaded");
        using (MadGUI.Indent()) {
            MadGUI.PropertyFieldEnumPopup(whenLevelLoaded, "");
            EditorGUILayout.Space();

            if (whenLevelLoaded.enumValueIndex == (int)LoadingScreen.WhenLevelLoaded.WaitAndShow)
            {
                using (MadGUI.Indent()) {
                    MadGUI.PropertyField(waitAndShowSeconds, "Seconds");
                    EditorGUILayout.Space();
                }
            }

            if (whenLevelLoaded.enumValueIndex != (int)LoadingScreen.WhenLevelLoaded.ShowImmediately)
            {
                GUIGameObjectList("Enable Objects", changeEnable);
                GUIGameObjectList("Disable Objects", changeDisable);
            }

            EditorGUILayout.Space();

            GUILayout.Label("Don't Destroy Objects", "HeaderLabel");
            var arrayList = new MadGUI.ArrayList <string>(ignoreObjects, property => {
                MadGUI.PropertyField(property, "");
            });
            arrayList.drawOrderButtons = false;
            arrayList.Draw();

            GUILayout.Label("Notify", "HeaderLabel");
            FieldMessage(onLoadedMessage);
        }
        MadGUI.EndBox();

        MadGUI.BeginBox("When Level Shown");
        using (MadGUI.Indent()) {
            MadGUI.PropertyField(timeScaleToOneWhenShown, "Set Time Scale To One");

            GUILayout.Label("Notify", "HeaderLabel");
            FieldMessage(onLevelShowMessage);
        }
        MadGUI.EndBox();

        serializedObject.ApplyModifiedProperties();
    }
    protected void SectionSprite(DisplayFlag flags)
    {
        serializedObject.Update();
        GUIDepthCheck();

        MadGUI.PropertyField(panel, "Panel", MadGUI.ObjectIsSet);
        EditorGUILayout.Space();

        MadGUI.PropertyField(visible, "Visible");

        if ((flags & DisplayFlag.WithoutMaterial) == 0)
        {
            MadGUI.PropertyFieldEnumPopup(inputType, "Input Type");
            MadGUI.Indent(() => {
                switch (sprite.inputType)
                {
                case MadSprite.InputType.SingleTexture:
                    MadGUI.PropertyField(texture, "Texture", MadGUI.ObjectIsSet);
                    MadGUI.Indent(() => {
                        MadGUI.PropertyFieldVector2(textureRepeat, "Repeat");
                        MadGUI.PropertyFieldVector2(textureOffset, "Offset");
                    });
                    break;

                case MadSprite.InputType.TextureAtlas:
                    MadGUI.PropertyField(textureAtlas, "Texture Atlas", MadGUI.ObjectIsSet);

                    if (sprite.textureAtlas != null)
                    {
                        MadAtlasUtil.AtlasField(textureAtlasSpriteGUID, sprite.textureAtlas, "Sprite", this);
                    }

                    break;

                default:
                    Debug.LogError("Unknown input type: " + sprite.inputType);
                    break;
                }
            });
        }

        MadGUI.PropertyField(hasPremultipliedAlpha, "Has Pre-Alpha");

        MadGUI.PropertyField(tint, "Tint");

        EditorGUILayout.Space();

        if ((flags & DisplayFlag.WithoutSize) == 0)
        {
            EditorGUILayout.Space();
            GUI.backgroundColor = Color.yellow;
            if (GUILayout.Button(new GUIContent("Resize To Texture",
                                                "Resizes this sprite to match texture size")))
            {
                MadUndo.RecordObject2(sprite, "Resize To Texture");
                sprite.ResizeToTexture();
                EditorUtility.SetDirty(sprite);
            }
            GUI.backgroundColor = Color.white;
            EditorGUILayout.Space();
        }

        EditorGUILayout.Space();

        MadGUI.PropertyField(pivotPoint, "Pivot Point");
        if (sprite.pivotPoint == MadSprite.PivotPoint.Custom)
        {
            MadGUI.Indent(() => {
                MadGUI.PropertyFieldVector2(customPivotPoint, "Custom Pivot Point");
            });
        }

        MadGUI.PropertyField(guiDepth, "GUI Depth");

        EditorGUILayout.Space();

        if ((flags & DisplayFlag.WithoutFill) == 0)
        {
            MadGUI.PropertyField(fillType, "Fill Type");
            EditorGUILayout.Slider(fillValue, 0, 1, "Fill Value");

            if (sprite.fillType == MadSprite.FillType.RadialCCW || sprite.fillType == MadSprite.FillType.RadialCW)
            {
                MadGUI.PropertyFieldSlider(radialFillOffset, -1, 1, "Offset");
                MadGUI.PropertyFieldSlider(radialFillLength, 0, 1, "Length");
            }
        }

        if (showLiveBounds)
        {
            GUILayout.Label("Sprite Border", "HeaderLabel");
            EditorGUILayout.Space();
            if (sprite.CanDraw())
            {
                FieldLiveBounds();
            }
            else
            {
                MadGUI.Info("More settings will be available when the sprite texture or atlas is set.");
            }
        }

        serializedObject.ApplyModifiedProperties();
    }
    public override void OnInspectorGUI()
    {
        if (MadTrialEditor.isTrialVersion && MadTrialEditor.expired)
        {
            MadTrialEditor.OnEditorGUIExpired("Mad Level Manager");
            return;
        }

        serializedObject.UpdateIfDirtyOrScript();

        GUILayout.Label("Fundaments", "HeaderLabel");
        MadGUI.Indent(() => {
            ConfigurationField();

            if (script.currentConfiguration != null)
            {
                var group = script.currentConfiguration.FindGroupById(script.configurationGroup);
                int index = GroupToIndex(script.currentConfiguration, group);
                var names = GroupNames(script.currentConfiguration);

                EditorGUI.BeginChangeCheck();
                index = EditorGUILayout.Popup("Group", index, names);
                if (EditorGUI.EndChangeCheck())
                {
                    MadUndo.RecordObject2(script, "Changed Group");
                    script.configurationGroup = IndexToGroup(script.currentConfiguration, index).id;
                    script.dirty = true;
                    EditorUtility.SetDirty(script);
                }
                GUI.enabled = true;
            }

            EditorGUILayout.Space();

            MadGUI.PropertyField(iconTemplate, "Icon Template", MadGUI.ObjectIsSet);
            if (script.iconTemplate != null)
            {
                var prefabType = PrefabUtility.GetPrefabType(script.iconTemplate);
                if (prefabType == PrefabType.None)
                {
                    MadGUI.Warning("It's recommended to use prefab as a template. All visible icon instances will be linked to this prefab.");
                }
            }

            using (MadGUI.Indent()) {
                MadGUI.PropertyFieldEnumPopup(enumerationType, "Enumeration");
                using (MadGUI.Indent()) {
                    MadGUI.PropertyField(enumerationOffset, "Offset");
                }
            }

            EditorGUILayout.Space();

            MadGUI.PropertyField(backgroundTexture, "Background Texture");

            EditorGUILayout.Space();

            MadGUI.Info("Use the button below if you've updated your icon template and you want to replace all icons in your layout with it.");

            if (MadGUI.Button("Replace All Icons", Color.yellow))
            {
                ReplaceAllIcons();
            }

            MadGUI.Info("More customization options are available in the Draggable object.");

            if (MadGUI.Button("Select Draggable", Color.magenta))
            {
                SelectDraggable();
            }
        });

        EditorGUILayout.Space();

        GUILayout.Label("Mechanics", "HeaderLabel");

        MadGUI.Indent(() => {
            LookAtLastLevel();
            EditorGUILayout.Space();
            HandleMobileBack();
            EditorGUILayout.Space();
            TwoStepActivation();
            EditorGUILayout.Space();
            LoadLevel();
        });

        serializedObject.ApplyModifiedProperties();
    }
示例#15
0
    public override void OnInspectorGUI()
    {
        if (MadTrialEditor.isTrialVersion && MadTrialEditor.expired)
        {
            MadTrialEditor.OnEditorGUIExpired("Mad Level Manager");
            return;
        }

        newSetupMethod = (MadLevelGridLayout.SetupMethod)EditorGUILayout.EnumPopup("Setup Method", script.setupMethod);
        if (newSetupMethod != script.setupMethod)
        {
            if (newSetupMethod == MadLevelGridLayout.SetupMethod.Generate && EditorUtility.DisplayDialog(
                    "Are you sure?",
                    "Are you sure that you want to switch to Generate setup method? If you've made any changes to grid "
                    + "object, these changes will be lost!", "Set to Generate", "Cancel"))
            {
                script.setupMethod = newSetupMethod;
                script.deepClean   = true;
                EditorUtility.SetDirty(script);
            }
            else if (EditorUtility.DisplayDialog(
                         "Are you sure?",
                         "Are you sure that you want to switch to Manual setup method? Be aware that after doing this:\n"
                         + "- You won't be able to change your level group (currently " + script.currentConfiguration.FindGroupById(script.configurationGroup).name + ")\n"
                         + "- You won't be able to regenerate grid without losing custom changes",
                         "Set to Manual", "Cancel"))
            {
                script.setupMethod = newSetupMethod;
                EditorUtility.SetDirty(script);
            }
        }

        serializedObject.UpdateIfDirtyOrScript();

        if (script.setupMethod == MadLevelGridLayout.SetupMethod.Generate)
        {
            RebuildButton();
        }

        GUILayout.Label("Fundaments", "HeaderLabel");

        MadGUI.Indent(() => {
            ConfigurationField();

            if (script.currentConfiguration != null)
            {
                var group = script.currentConfiguration.FindGroupById(script.configurationGroup);
                int index = GroupToIndex(script.currentConfiguration, group);
                var names = GroupNames(script.currentConfiguration);

                GUI.enabled = script.setupMethod == MadLevelGridLayout.SetupMethod.Generate;
                EditorGUI.BeginChangeCheck();
                index = EditorGUILayout.Popup("Group", index, names);
                if (EditorGUI.EndChangeCheck())
                {
                    script.configurationGroup = IndexToGroup(script.currentConfiguration, index).id;
                    Rebuild();
                }
                GUI.enabled = true;
            }

            EditorGUILayout.Space();

            GUI.enabled = generate;

            IconTemplateField();
            EditorGUILayout.Space();

            using (MadGUI.Indent()) {
                MadGUI.PropertyFieldEnumPopup(enumerationType, "Enumeration");
                using (MadGUI.Indent()) {
                    MadGUI.PropertyField(enumerationOffset, "Offset");
                }

                MadGUI.PropertyFieldVector2(iconScale, "Scale");
                MadGUI.PropertyFieldVector2(iconOffset, "Offset");
            }

            EditorGUILayout.Space();

            GUI.enabled = true;

            MadGUI.PropertyField(leftSlideSprite, "Prev Page Sprite");
            MadGUI.Indent(() => {
                MadGUI.PropertyFieldVector2(leftSlideScale, "Scale");
                MadGUI.PropertyFieldVector2(leftSlideOffset, "Offset");
            });

            MadGUI.PropertyField(rightSlideSprite, "Next Page Sprite");
            MadGUI.Indent(() => {
                MadGUI.PropertyFieldVector2(rightSlideScale, "Scale");
                MadGUI.PropertyFieldVector2(rightSlideOffset, "Offset");
            });
        });

        EditorGUILayout.Space();

        GUILayout.Label("Dimensions", "HeaderLabel");

        using (MadGUI.Indent()) {
            MadGUI.PropertyField(pixelsWidth, "Pixels Width");
            MadGUI.PropertyField(pixelsHeight, "Pixels Height");

            EditorGUILayout.Space();
            GUI.enabled = generate;
            MadGUI.PropertyField(gridHeight, "Grid Rows");
            MadGUI.PropertyField(gridWidth, "Grid Columns");

            EditorGUILayout.Space();

            MadGUI.PropertyField(limitLevelsPerPage, "Limit Levels Per Page");
            using (MadGUI.EnabledIf(script.limitLevelsPerPage)) {
                MadGUI.PropertyField(levelsPerPage, "Levels Per Page");
            }

            EditorGUILayout.Space();

            MadGUI.PropertyFieldEnumPopup(horizontalAlign, "Horizontal Align");
            MadGUI.PropertyFieldEnumPopup(verticalAlign, "Vertical Align");

            GUI.enabled = true;
            EditorGUILayout.Space();
        }

        GUILayout.Label("Paging", "HeaderLabel");

        using (MadGUI.Indent()) {
            MadGUI.PropertyFieldEnumPopup(pagingMethod, "Paging Method");
            using (MadGUI.Indent()) {
                MadGUI.PropertyField(pagingInvert, "Invert");

                if (IsPagingMethodZoom())
                {
                    MadGUI.PropertyField(pagesZoomScale, "Zoom Scale");
                }
            }

            EditorGUILayout.Space();

            MadGUI.PropertyField(pagesOffsetFromResolution, "Dynamic Offset");
            using (MadGUI.Indent()) {
                if (pagesOffsetFromResolution.boolValue)
                {
                    MadGUI.PropertyFieldSlider(pagesOffsetPercent, 0, 3, "Offset %");
                }
                else
                {
                    MadGUI.PropertyField(pagesOffsetManual, "Pixels Offset");
                }
            }
        }

        EditorGUILayout.Space();

        GUILayout.Label("Mechanics", "HeaderLabel");

        MadGUI.Indent(() => {
            LookAtLastLevel();
            EditorGUILayout.Space();
            HandleMobileBack();
            EditorGUILayout.Space();
            TwoStepActivation();
            EditorGUILayout.Space();
            LoadLevel();
            EditorGUILayout.Space();
            IgnoreInput();
        });

        GUILayout.Label("Debug", "HeaderLabel");

        MadGUI.Indent(() => {
            MadGUI.PropertyField(hideManagerdObjects, "Hide Managed",
                                 "Hides managed by Mad Level Manager objects from the Hierarchy. If you want to have a look at what the hierarchy "
                                 + "looks like exacly, you can unckeck this option. Be aware that all direct changes to generated "
                                 + "objects will be lost!");
        });

        serializedObject.ApplyModifiedProperties();
    }