private void Connect(List <Vector2> points, int j, Rect bounds, bool closingUp = false)
{
Vector2 rightPoint = points [points.Count - 1];
Edge newEdge = _edges [j] as Edge;
Side newOrientation = _edgeOrientations [j];
// the point that must be connected to rightPoint:
if (newEdge.clippedEnds [newOrientation] == null)
{
Debug.LogError("XXX: Null detected when there should be a Vector2!");
}
Vector2 newPoint = (Vector2)newEdge.clippedEnds [newOrientation];
if (!CloseEnough(rightPoint, newPoint))
{
// The points do not coincide, so they must have been clipped at the bounds;
// see if they are on the same border of the bounds:
if (rightPoint.x != newPoint.x &&
rightPoint.y != newPoint.y)
{
// They are on different borders of the bounds;
// insert one or two corners of bounds as needed to hook them up:
// (NOTE this will not be correct if the region should take up more than
// half of the bounds rect, for then we will have gone the wrong way
// around the bounds and included the smaller part rather than the larger)
int rightCheck = BoundsCheck.Check(rightPoint, bounds);
int newCheck = BoundsCheck.Check(newPoint, bounds);
float px, py;
if ((rightCheck & BoundsCheck.RIGHT) != 0)
{
px = bounds.xMax;
if ((newCheck & BoundsCheck.BOTTOM) != 0)
{
py = bounds.yMax;
points.Add(new Vector2(px, py));
}
else if ((newCheck & BoundsCheck.TOP) != 0)
{
py = bounds.yMin;
points.Add(new Vector2(px, py));
}
else if ((newCheck & BoundsCheck.LEFT) != 0)
{
if (rightPoint.y - bounds.y + newPoint.y - bounds.y < bounds.height)
{
py = bounds.yMin;
}
else
{
py = bounds.yMax;
}
points.Add(new Vector2(px, py));
points.Add(new Vector2(bounds.xMin, py));
}
}
else if ((rightCheck & BoundsCheck.LEFT) != 0)
{
px = bounds.xMin;
if ((newCheck & BoundsCheck.BOTTOM) != 0)
{
py = bounds.yMax;
points.Add(new Vector2(px, py));
}
else if ((newCheck & BoundsCheck.TOP) != 0)
{
py = bounds.yMin;
points.Add(new Vector2(px, py));
}
else if ((newCheck & BoundsCheck.RIGHT) != 0)
{
if (rightPoint.y - bounds.y + newPoint.y - bounds.y < bounds.height)
{
py = bounds.yMin;
}
else
{
py = bounds.yMax;
}
points.Add(new Vector2(px, py));
points.Add(new Vector2(bounds.xMax, py));
}
}
else if ((rightCheck & BoundsCheck.TOP) != 0)
{
py = bounds.yMin;
if ((newCheck & BoundsCheck.RIGHT) != 0)
{
px = bounds.xMax;
points.Add(new Vector2(px, py));
}
else if ((newCheck & BoundsCheck.LEFT) != 0)
{
px = bounds.xMin;
points.Add(new Vector2(px, py));
}
else if ((newCheck & BoundsCheck.BOTTOM) != 0)
{
if (rightPoint.x - bounds.x + newPoint.x - bounds.x < bounds.width)
{
px = bounds.xMin;
}
else
{
px = bounds.xMax;
}
points.Add(new Vector2(px, py));
points.Add(new Vector2(px, bounds.yMax));
}
}
else if ((rightCheck & BoundsCheck.BOTTOM) != 0)
{
py = bounds.yMax;
if ((newCheck & BoundsCheck.RIGHT) != 0)
{
px = bounds.xMax;
points.Add(new Vector2(px, py));
}
else if ((newCheck & BoundsCheck.LEFT) != 0)
{
px = bounds.xMin;
points.Add(new Vector2(px, py));
}
else if ((newCheck & BoundsCheck.TOP) != 0)
{
if (rightPoint.x - bounds.x + newPoint.x - bounds.x < bounds.width)
{
px = bounds.xMin;
}
else
{
px = bounds.xMax;
}
points.Add(new Vector2(px, py));
points.Add(new Vector2(px, bounds.yMin));
}
}
}
if (closingUp)
{
// newEdge's ends have already been added
return;
}
points.Add(newPoint);
}
if (newEdge.clippedEnds [SideHelper.Other(newOrientation)] == null)
{
Debug.LogError("XXX: Null detected when there should be a Vector2!");
}
Vector2 newRightPoint = (Vector2)newEdge.clippedEnds [SideHelper.Other(newOrientation)];
if (!CloseEnough(points [0], newRightPoint))
{
points.Add(newRightPoint);
}
}
private void Connect(List <Vector2> Vector2s, int j, Rect bounds, bool closingUp)
{
Vector2 rightVector2 = Vector2s[Vector2s.Count - 1];
Edge newEdge = _edges[j] as Edge;
LR newOrientation = _edgeOrientations[j];
// the Vector2 that must be connected to rightVector2:
Vector2 newVector2 = newEdge.ClippedEnds[newOrientation];
if (!CloseEnough(rightVector2, newVector2))
{
// The Vector2s do not coincide, so they must have been clipped at the bounds;
// see if they are on the same border of the bounds:
if (rightVector2.x != newVector2.x &&
rightVector2.y != newVector2.y)
{
// They are on different borders of the bounds;
// insert one or two corners of bounds as needed to hook them up:
// (NOTE this will not be corRect if the region should take up more than
// half of the bounds Rect, for then we will have gone the wrong way
// around the bounds and included the smaller part rather than the larger)
int rightCheck = BoundsCheck.Check(rightVector2, bounds);
int newCheck = BoundsCheck.Check(newVector2, bounds);
float px, py;
//throw new NotImplementedException("Modified, might not work");
if (rightCheck == BoundsCheck.RIGHT)
{
px = bounds.right;
if (newCheck == BoundsCheck.BOTTOM)
{
py = bounds.bottom;
Vector2s.Add(new Vector2(px, py));
}
else if (newCheck == BoundsCheck.TOP)
{
py = bounds.top;
Vector2s.Add(new Vector2(px, py));
}
else if (newCheck == BoundsCheck.LEFT)
{
if (rightVector2.y - bounds.y + newVector2.y - bounds.y < bounds.height)
{
py = bounds.top;
}
else
{
py = bounds.bottom;
}
Vector2s.Add(new Vector2(px, py));
Vector2s.Add(new Vector2(bounds.left, py));
}
}
else if (rightCheck == BoundsCheck.LEFT)
{
px = bounds.left;
if (newCheck == BoundsCheck.BOTTOM)
{
py = bounds.bottom;
Vector2s.Add(new Vector2(px, py));
}
else if (newCheck == BoundsCheck.TOP)
{
py = bounds.top;
Vector2s.Add(new Vector2(px, py));
}
else if (newCheck == BoundsCheck.RIGHT)
{
if (rightVector2.y - bounds.y + newVector2.y - bounds.y < bounds.height)
{
py = bounds.top;
}
else
{
py = bounds.bottom;
}
Vector2s.Add(new Vector2(px, py));
Vector2s.Add(new Vector2(bounds.right, py));
}
}
else if (rightCheck == BoundsCheck.TOP)
{
py = bounds.top;
if (newCheck == BoundsCheck.RIGHT)
{
px = bounds.right;
Vector2s.Add(new Vector2(px, py));
}
else if (newCheck == BoundsCheck.LEFT)
{
px = bounds.left;
Vector2s.Add(new Vector2(px, py));
}
else if (newCheck == BoundsCheck.BOTTOM)
{
if (rightVector2.x - bounds.x + newVector2.x - bounds.x < bounds.width)
{
px = bounds.left;
}
else
{
px = bounds.right;
}
Vector2s.Add(new Vector2(px, py));
Vector2s.Add(new Vector2(px, bounds.bottom));
}
}
else if (rightCheck == BoundsCheck.BOTTOM)
{
py = bounds.bottom;
if (newCheck == BoundsCheck.RIGHT)
{
px = bounds.right;
Vector2s.Add(new Vector2(px, py));
}
else if (newCheck == BoundsCheck.LEFT)
{
px = bounds.left;
Vector2s.Add(new Vector2(px, py));
}
else if (newCheck == BoundsCheck.TOP)
{
if (rightVector2.x - bounds.x + newVector2.x - bounds.x < bounds.width)
{
px = bounds.left;
}
else
{
px = bounds.right;
}
Vector2s.Add(new Vector2(px, py));
Vector2s.Add(new Vector2(px, bounds.top));
}
}
}
if (closingUp)
{
// newEdge's ends have already been added
return;
}
Vector2s.Add(newVector2);
}
Vector2 newRightVector2 = newEdge.ClippedEnds[LR.Other(newOrientation)];
if (!CloseEnough(Vector2s[0], newRightVector2))
{
Vector2s.Add(newRightVector2);
}
}
private void Connect(ref List <Vector2f> points, int j, Rectf bounds, bool closingUp = false)
{
Vector2f rightPoint = points[points.Count - 1];
Edge newEdge = edges[j];
LR newOrientation = edgeOrientations[j];
// The point that must be conected to rightPoint:
Vector2f newPoint = newEdge.ClippedEnds[newOrientation];
if (!CloseEnough(rightPoint, newPoint))
{
// The points do not coincide, so they must have been clipped at the bounds;
// see if they are on the same border of the bounds:
if (rightPoint.x != newPoint.x && rightPoint.y != newPoint.y)
{
// They are on different borders of the bounds;
// insert one or two corners of bounds as needed to hook them up:
// (NOTE this will not be correct if the region should take up more than
// half of the bounds rect, for then we will have gone the wrong way
// around the bounds and included the smaller part rather than the larger)
int rightCheck = BoundsCheck.Check(rightPoint, bounds);
int newCheck = BoundsCheck.Check(newPoint, bounds);
float px, py;
if ((rightCheck & BoundsCheck.RIGHT) != 0)
{
px = bounds.right;
if ((newCheck & BoundsCheck.BOTTOM) != 0)
{
py = bounds.bottom;
points.Add(new Vector2f(px, py));
}
else if ((newCheck & BoundsCheck.TOP) != 0)
{
py = bounds.top;
points.Add(new Vector2f(px, py));
}
else if ((newCheck & BoundsCheck.LEFT) != 0)
{
if (rightPoint.y - bounds.y + newPoint.y - bounds.y < bounds.height)
{
py = bounds.top;
}
else
{
py = bounds.bottom;
}
points.Add(new Vector2f(px, py));
points.Add(new Vector2f(bounds.left, py));
}
}
else if ((rightCheck & BoundsCheck.LEFT) != 0)
{
px = bounds.left;
if ((newCheck & BoundsCheck.BOTTOM) != 0)
{
py = bounds.bottom;
points.Add(new Vector2f(px, py));
}
else if ((newCheck & BoundsCheck.TOP) != 0)
{
py = bounds.top;
points.Add(new Vector2f(px, py));
}
else if ((newCheck & BoundsCheck.RIGHT) != 0)
{
if (rightPoint.y - bounds.y + newPoint.y - bounds.y < bounds.height)
{
py = bounds.top;
}
else
{
py = bounds.bottom;
}
points.Add(new Vector2f(px, py));
points.Add(new Vector2f(bounds.right, py));
}
}
else if ((rightCheck & BoundsCheck.TOP) != 0)
{
py = bounds.top;
if ((newCheck & BoundsCheck.RIGHT) != 0)
{
px = bounds.right;
points.Add(new Vector2f(px, py));
}
else if ((newCheck & BoundsCheck.LEFT) != 0)
{
px = bounds.left;
points.Add(new Vector2f(px, py));
}
else if ((newCheck & BoundsCheck.BOTTOM) != 0)
{
if (rightPoint.x - bounds.x + newPoint.x - bounds.x < bounds.width)
{
px = bounds.left;
}
else
{
px = bounds.right;
}
points.Add(new Vector2f(px, py));
points.Add(new Vector2f(px, bounds.bottom));
}
}
else if ((rightCheck & BoundsCheck.BOTTOM) != 0)
{
py = bounds.bottom;
if ((newCheck & BoundsCheck.RIGHT) != 0)
{
px = bounds.right;
points.Add(new Vector2f(px, py));
}
else if ((newCheck & BoundsCheck.LEFT) != 0)
{
px = bounds.left;
points.Add(new Vector2f(px, py));
}
else if ((newCheck & BoundsCheck.TOP) != 0)
{
if (rightPoint.x - bounds.x + newPoint.x - bounds.x < bounds.width)
{
px = bounds.left;
}
else
{
px = bounds.right;
}
points.Add(new Vector2f(px, py));
points.Add(new Vector2f(px, bounds.top));
}
}
}
if (closingUp)
{
// newEdge's ends have already been added
return;
}
points.Add(newPoint);
}
Vector2f newRightPoint = newEdge.ClippedEnds[LR.Other(newOrientation)];
if (!CloseEnough(points[0], newRightPoint))
{
points.Add(newRightPoint);
}
}
private void Connect(List <Point> points, int j, Rect bounds, bool closingUp = false)
{
Point rightPoint = points[points.Count - 1];
Edge newEdge = _edges[j] as Edge;
Side newOrientation = _edgeOrientations[j];
// the point that must be connected to rightPoint:
if (newEdge.clippedEnds[newOrientation] == null)
{
Debug.WriteLine("XXX: Null detected when there should be a Point!", "Error");
}
Point newPoint = (Point)newEdge.clippedEnds[newOrientation];
if (!CloseEnough(rightPoint, newPoint))
{
// The points do not coincide, so they must have been clipped at the bounds;
// see if they are on the same border of the bounds:
if (rightPoint.X != newPoint.X &&
rightPoint.Y != newPoint.Y)
{
// They are on different borders of the bounds;
// insert one or two corners of bounds as needed to hook them up:
// (NOTE this will not be correct if the region should take up more than
// half of the bounds rect, for then we will have gone the wrong way
// around the bounds and included the smaller part rather than the larger)
int rightCheck = BoundsCheck.Check(rightPoint, bounds);
int newCheck = BoundsCheck.Check(newPoint, bounds);
double px, py;
if ((rightCheck & BoundsCheck.RIGHT) != 0)
{
px = bounds.Right;
if ((newCheck & BoundsCheck.BOTTOM) != 0)
{
py = bounds.Bottom;
points.Add(new Point(px, py));
}
else if ((newCheck & BoundsCheck.TOP) != 0)
{
py = bounds.Top;
points.Add(new Point(px, py));
}
else if ((newCheck & BoundsCheck.LEFT) != 0)
{
if (rightPoint.Y - bounds.Y + newPoint.Y - bounds.Y < bounds.Height)
{
py = bounds.Top;
}
else
{
py = bounds.Bottom;
}
points.Add(new Point(px, py));
points.Add(new Point(bounds.Left, py));
}
}
else if ((rightCheck & BoundsCheck.LEFT) != 0)
{
px = bounds.Left;
if ((newCheck & BoundsCheck.BOTTOM) != 0)
{
py = bounds.Bottom;
points.Add(new Point(px, py));
}
else if ((newCheck & BoundsCheck.TOP) != 0)
{
py = bounds.Top;
points.Add(new Point(px, py));
}
else if ((newCheck & BoundsCheck.RIGHT) != 0)
{
if (rightPoint.Y - bounds.Y + newPoint.Y - bounds.Y < bounds.Height)
{
py = bounds.Top;
}
else
{
py = bounds.Bottom;
}
points.Add(new Point(px, py));
points.Add(new Point(bounds.Right, py));
}
}
else if ((rightCheck & BoundsCheck.TOP) != 0)
{
py = bounds.Top;
if ((newCheck & BoundsCheck.RIGHT) != 0)
{
px = bounds.Right;
points.Add(new Point(px, py));
}
else if ((newCheck & BoundsCheck.LEFT) != 0)
{
px = bounds.Left;
points.Add(new Point(px, py));
}
else if ((newCheck & BoundsCheck.BOTTOM) != 0)
{
if (rightPoint.X - bounds.X + newPoint.X - bounds.X < bounds.Width)
{
px = bounds.Left;
}
else
{
px = bounds.Right;
}
points.Add(new Point(px, py));
points.Add(new Point(px, bounds.Bottom));
}
}
else if ((rightCheck & BoundsCheck.BOTTOM) != 0)
{
py = bounds.Bottom;
if ((newCheck & BoundsCheck.RIGHT) != 0)
{
px = bounds.Right;
points.Add(new Point(px, py));
}
else if ((newCheck & BoundsCheck.LEFT) != 0)
{
px = bounds.Left;
points.Add(new Point(px, py));
}
else if ((newCheck & BoundsCheck.TOP) != 0)
{
if (rightPoint.X - bounds.X + newPoint.X - bounds.X < bounds.Width)
{
px = bounds.Left;
}
else
{
px = bounds.Right;
}
points.Add(new Point(px, py));
points.Add(new Point(px, bounds.Top));
}
}
}
if (closingUp)
{
// newEdge's ends have already been added
return;
}
points.Add(newPoint);
}
if (newEdge.clippedEnds[SideHelper.Other(newOrientation)] == null)
{
Debug.WriteLine("XXX: Null detected when there should be a Point!", "Error");
}
Point newRightPoint = (Point)newEdge.clippedEnds[SideHelper.Other(newOrientation)];
if (!CloseEnough(points[0], newRightPoint))
{
points.Add(newRightPoint);
}
}
private void Connect(List <PointF> PointFs, int j, RectangleF bounds, bool closingUp)
{
PointF rightPointF = PointFs[PointFs.Count - 1];
Edge newEdge = _edges[j] as Edge;
LR newOrientation = _edgeOrientations[j];
// the PointF that must be connected to rightPointF:
PointF newPointF = newEdge.ClippedEnds[newOrientation];
if (!CloseEnough(rightPointF, newPointF))
{
// The PointFs do not coincide, so they must have been clipped at the bounds;
// see if they are on the same border of the bounds:
if (rightPointF.X != newPointF.X &&
rightPointF.Y != newPointF.Y)
{
// They are on different borders of the bounds;
// insert one or two corners of bounds as needed to hook them up:
// (NOTE this will not be corRectangleF if the region should take up more than
// half of the bounds RectangleF, for then we will have gone the wrong way
// around the bounds and included the smaller part rather than the larger)
int rightCheck = BoundsCheck.Check(rightPointF, bounds);
int newCheck = BoundsCheck.Check(newPointF, bounds);
float px, py;
//throw new NotImplementedException("Modified, might not work");
if (rightCheck == BoundsCheck.RIGHT)
{
px = bounds.Right;
if (newCheck == BoundsCheck.BOTTOM)
{
py = bounds.Bottom;
PointFs.Add(new PointF(px, py));
}
else if (newCheck == BoundsCheck.TOP)
{
py = bounds.Top;
PointFs.Add(new PointF(px, py));
}
else if (newCheck == BoundsCheck.LEFT)
{
if (rightPointF.Y - bounds.Y + newPointF.Y - bounds.Y < bounds.Height)
{
py = bounds.Top;
}
else
{
py = bounds.Bottom;
}
PointFs.Add(new PointF(px, py));
PointFs.Add(new PointF(bounds.Left, py));
}
}
else if (rightCheck == BoundsCheck.LEFT)
{
px = bounds.Left;
if (newCheck == BoundsCheck.BOTTOM)
{
py = bounds.Bottom;
PointFs.Add(new PointF(px, py));
}
else if (newCheck == BoundsCheck.TOP)
{
py = bounds.Top;
PointFs.Add(new PointF(px, py));
}
else if (newCheck == BoundsCheck.RIGHT)
{
if (rightPointF.Y - bounds.Y + newPointF.Y - bounds.Y < bounds.Height)
{
py = bounds.Top;
}
else
{
py = bounds.Bottom;
}
PointFs.Add(new PointF(px, py));
PointFs.Add(new PointF(bounds.Right, py));
}
}
else if (rightCheck == BoundsCheck.TOP)
{
py = bounds.Top;
if (newCheck == BoundsCheck.RIGHT)
{
px = bounds.Right;
PointFs.Add(new PointF(px, py));
}
else if (newCheck == BoundsCheck.LEFT)
{
px = bounds.Left;
PointFs.Add(new PointF(px, py));
}
else if (newCheck == BoundsCheck.BOTTOM)
{
if (rightPointF.X - bounds.X + newPointF.X - bounds.X < bounds.Width)
{
px = bounds.Left;
}
else
{
px = bounds.Right;
}
PointFs.Add(new PointF(px, py));
PointFs.Add(new PointF(px, bounds.Bottom));
}
}
else if (rightCheck == BoundsCheck.BOTTOM)
{
py = bounds.Bottom;
if (newCheck == BoundsCheck.RIGHT)
{
px = bounds.Right;
PointFs.Add(new PointF(px, py));
}
else if (newCheck == BoundsCheck.LEFT)
{
px = bounds.Left;
PointFs.Add(new PointF(px, py));
}
else if (newCheck == BoundsCheck.TOP)
{
if (rightPointF.X - bounds.X + newPointF.X - bounds.X < bounds.Width)
{
px = bounds.Left;
}
else
{
px = bounds.Right;
}
PointFs.Add(new PointF(px, py));
PointFs.Add(new PointF(px, bounds.Top));
}
}
}
if (closingUp)
{
// newEdge's ends have already been added
return;
}
PointFs.Add(newPointF);
}
PointF newRightPointF = newEdge.ClippedEnds[LR.Other(newOrientation)];
if (!CloseEnough(PointFs[0], newRightPointF))
{
PointFs.Add(newRightPointF);
}
}
private void Connect(List <Vector2> points, int j, Rect bounds, bool closingUp = false)
{
Vector2 vector = points[points.Count - 1];
Edge edge = _edges[j];
Side side = _edgeOrientations[j];
if (!edge.clippedEnds[side].HasValue)
{
UnityEngine.Debug.LogError("XXX: Null detected when there should be a Vector2!");
}
Vector2 value = edge.clippedEnds[side].Value;
if (!CloseEnough(vector, value))
{
if (vector.x != value.x && vector.y != value.y)
{
int num = BoundsCheck.Check(vector, bounds);
int num2 = BoundsCheck.Check(value, bounds);
if ((num & BoundsCheck.RIGHT) != 0)
{
float xMax = bounds.xMax;
if ((num2 & BoundsCheck.BOTTOM) != 0)
{
float yMax = bounds.yMax;
points.Add(new Vector2(xMax, yMax));
}
else if ((num2 & BoundsCheck.TOP) != 0)
{
float yMax = bounds.yMin;
points.Add(new Vector2(xMax, yMax));
}
else if ((num2 & BoundsCheck.LEFT) != 0)
{
float yMax = (!(vector.y - bounds.y + value.y - bounds.y < bounds.height)) ? bounds.yMax : bounds.yMin;
points.Add(new Vector2(xMax, yMax));
points.Add(new Vector2(bounds.xMin, yMax));
}
}
else if ((num & BoundsCheck.LEFT) != 0)
{
float xMax = bounds.xMin;
if ((num2 & BoundsCheck.BOTTOM) != 0)
{
float yMax = bounds.yMax;
points.Add(new Vector2(xMax, yMax));
}
else if ((num2 & BoundsCheck.TOP) != 0)
{
float yMax = bounds.yMin;
points.Add(new Vector2(xMax, yMax));
}
else if ((num2 & BoundsCheck.RIGHT) != 0)
{
float yMax = (!(vector.y - bounds.y + value.y - bounds.y < bounds.height)) ? bounds.yMax : bounds.yMin;
points.Add(new Vector2(xMax, yMax));
points.Add(new Vector2(bounds.xMax, yMax));
}
}
else if ((num & BoundsCheck.TOP) != 0)
{
float yMax = bounds.yMin;
if ((num2 & BoundsCheck.RIGHT) != 0)
{
float xMax = bounds.xMax;
points.Add(new Vector2(xMax, yMax));
}
else if ((num2 & BoundsCheck.LEFT) != 0)
{
float xMax = bounds.xMin;
points.Add(new Vector2(xMax, yMax));
}
else if ((num2 & BoundsCheck.BOTTOM) != 0)
{
float xMax = (!(vector.x - bounds.x + value.x - bounds.x < bounds.width)) ? bounds.xMax : bounds.xMin;
points.Add(new Vector2(xMax, yMax));
points.Add(new Vector2(xMax, bounds.yMax));
}
}
else if ((num & BoundsCheck.BOTTOM) != 0)
{
float yMax = bounds.yMax;
if ((num2 & BoundsCheck.RIGHT) != 0)
{
float xMax = bounds.xMax;
points.Add(new Vector2(xMax, yMax));
}
else if ((num2 & BoundsCheck.LEFT) != 0)
{
float xMax = bounds.xMin;
points.Add(new Vector2(xMax, yMax));
}
else if ((num2 & BoundsCheck.TOP) != 0)
{
float xMax = (!(vector.x - bounds.x + value.x - bounds.x < bounds.width)) ? bounds.xMax : bounds.xMin;
points.Add(new Vector2(xMax, yMax));
points.Add(new Vector2(xMax, bounds.yMin));
}
}
}
if (closingUp)
{
return;
}
points.Add(value);
}
if (!edge.clippedEnds[SideHelper.Other(side)].HasValue)
{
UnityEngine.Debug.LogError("XXX: Null detected when there should be a Vector2!");
}
Vector2 value2 = edge.clippedEnds[SideHelper.Other(side)].Value;
if (!CloseEnough(points[0], value2))
{
points.Add(value2);
}
}