internal Utf8Span TrimHelper(TrimType trimType)
{
ReadOnlySpan <byte> retSpan = Bytes;
if ((trimType & TrimType.Head) != 0)
{
int indexOfFirstNonWhiteSpaceChar = Utf8Utility.GetIndexOfFirstNonWhiteSpaceChar(retSpan);
Debug.Assert((uint)indexOfFirstNonWhiteSpaceChar <= (uint)retSpan.Length);
// TODO_UTF8STRING: Can use an unsafe slicing routine below if we need a perf boost.
retSpan = retSpan.Slice(indexOfFirstNonWhiteSpaceChar);
}
if ((trimType & TrimType.Tail) != 0)
{
int indexOfTrailingWhiteSpaceSequence = Utf8Utility.GetIndexOfTrailingWhiteSpaceSequence(retSpan);
Debug.Assert((uint)indexOfTrailingWhiteSpaceSequence <= (uint)retSpan.Length);
// TODO_UTF8STRING: Can use an unsafe slicing routine below if we need a perf boost.
retSpan = retSpan.Slice(0, indexOfTrailingWhiteSpaceSequence);
}
return(UnsafeCreateWithoutValidation(retSpan));
}
private MString TrimHelper(TrimType trimType)
{
int end = this.Length - 1;
int start = 0;
if (((uint)trimType | (uint)TrimType.Left) != 0)
{
start = 0;
while (start < this.Length)
{
if (!char.IsWhiteSpace(this[start]))
{
break;
}
start++;
}
}
if (((uint)trimType | (uint)TrimType.Right) != 0)
{
end = this.Length - 1;
while (end >= start)
{
if (!char.IsWhiteSpace(this[end]))
{
break;
}
end--;
}
}
return(this.CreateTrimmedString(start, end));
}
// This function is used to prevent long quotations in error messages
private static void AppendTrimmed(StringBuilder sb, string value, int startIndex, int count, TrimType trimType)
{
const int TrimSize = 32;
const string TrimMarker = "...";
if (count <= TrimSize) {
sb.Append(value, startIndex, count);
} else {
switch (trimType) {
case TrimType.Left:
sb.Append(TrimMarker);
sb.Append(value, startIndex + count - TrimSize, TrimSize);
break;
case TrimType.Right:
sb.Append(value, startIndex, TrimSize);
sb.Append(TrimMarker);
break;
case TrimType.Middle:
sb.Append(value, startIndex, TrimSize / 2);
sb.Append(TrimMarker);
sb.Append(value, startIndex + count - TrimSize / 2, TrimSize / 2);
break;
}
}
}
private Utf8String TrimHelper(TrimType trimType)
{
Utf8Span trimmedSpan = this.AsSpan().TrimHelper(trimType);
// Try to avoid allocating a new Utf8String instance if possible.
// Otherwise, allocate a new substring wrapped around the resulting slice.
return((trimmedSpan.Length == this.Length) ? this : trimmedSpan.ToUtf8String());
}
public void SetPropertyValue(string property, string value)
{
if (property == "Type")
{
Type = (TrimType)Enum.Parse(typeof(TrimType), value.XOMLName());
}
else
{
throw new OwlKeywordException(KeywordsType.Trim, string.Format(ETexts.GT(ErrorType.XOMLEnumInvalid), property));
}
}
public TrimPath(
string name,
string matchName,
TrimType trimPathType,
Animatable <double> startPercent,
Animatable <double> endPercent,
Animatable <double> offsetDegrees)
: base(name, matchName)
{
TrimPathType = trimPathType;
StartPercent = startPercent;
EndPercent = endPercent;
OffsetDegrees = offsetDegrees;
}
public string Trim(TrimType trimType, string value)
{
switch (trimType)
{
case TrimType.Left:
value = value.TrimStart();
break;
case TrimType.Right:
value = value.TrimEnd();
break;
case TrimType.Both:
value = value.Trim();
break;
}
return(value);
}
public void In(
[FriendlyName("Target", "The target string to be trimmed.")]
string Target,
[FriendlyName("Trim Type", "Specify the side of the string that will be trimmed.")]
[SocketState(false, false)]
TrimType trimType,
[FriendlyName("Characters", "(optional) Specify the characters to trim. If none are provided, whitespace will be trimmed by default.")]
[SocketState(false, false)]
string trimChars,
[FriendlyName("Result", "Resulting trimmed string.")]
out string Result
)
{
char[] myChar;
// Determine what to trim
if (trimChars == "")
{
string whitespace = " ";
myChar = whitespace.ToCharArray();
}
else
{
myChar = trimChars.ToCharArray();
}
// Trim string based on TrimType
if (trimType == TrimType.Both)
{
Result = Target.Trim(myChar);
}
else if (trimType == TrimType.Left)
{
Result = Target.TrimStart(myChar);
}
else
{
Result = Target.TrimEnd(myChar);
}
}
public static string TrimDuplicates(this string input, TrimType trimType)
{
string result = string.Empty;
switch (trimType)
{
case TrimType.Comma:
result = input.TrimCharacter(',');
break;
case TrimType.Pipe:
result = input.TrimCharacter('|');
break;
case TrimType.Colon:
result = input.TrimCharacter(':');
break;
}
return(result);
}
static public bool BuildAtlas(TrimType trimType, List <SpriteElement> listSprite, Dictionary <string, EAPInfoAttachment> dicPivot, string texturePath, int padingSize, bool append = false)
{
try
{
//bool checkAppend=append;
float prog = 0.2f;
EditorUtility.DisplayCancelableProgressBar("Creating Spritesheet", "Auto Build Atlas Sprites", prog);
Texture2D[] textArray = new Texture2D[listSprite.Count];
for (int i = 0; i < textArray.Length; i++)
{
textArray[i] = listSprite[i].texture;
}
Texture2D mainTexture = new Texture2D(8192, 8192);
Rect[] rects = mainTexture.PackTextures(textArray, padingSize, 8192, false);
mainTexture.Apply();
//ImportTextureUtil.MaxImportSettings(mainTexture);
int xmin = 0;
int ymin = 0;
int cacheWidth = mainTexture.width;
int cacheHeight = mainTexture.height;
int optimizeWidth = cacheWidth;
int optimizeHeight = cacheHeight;
Texture2D mainTexture2 = null;
prog = 0.4f;
EditorUtility.DisplayCancelableProgressBar("Creating Spritesheet", "Auto Build Atlas Sprites", prog);
#region Trim to minimum Texture
if (trimType == TrimType.TrimMinimum && rects.Length > 0)
{
float rectMinX = rects[0].xMin;
float rectMinY = rects[0].yMin;
float rectMaxX = rects[0].xMax;
float rectMaxY = rects[0].yMax;
for (int i = 1; i < rects.Length; i++)
{
if (rects[i].xMin < rectMinX)
{
rectMinX = rects[i].xMin;
}
if (rects[i].yMin < rectMinY)
{
rectMinY = rects[i].yMin;
}
if (rects[i].xMax < rectMaxX)
{
rectMaxX = rects[i].xMax;
}
if (rects[i].yMax < rectMaxY)
{
rectMaxY = rects[i].yMax;
}
}
int intRectMinX = (int)(rectMinX * cacheWidth);
int intRectMinY = (int)(rectMinY * cacheHeight);
int intRectMaxX = (int)(rectMaxX * cacheWidth);
int intRectMaxY = (int)(rectMaxY * cacheHeight);
Color32[] pixels = mainTexture.GetPixels32();
xmin = mainTexture.width;
int xmax = 0;
ymin = mainTexture.height;
int ymax = 0;
int oldWidth = mainTexture.width;
int oldHeight = mainTexture.height;
// Trim solid pixels
for (int y = 0, yw = oldHeight; y < yw; ++y)
{
for (int x = 0, xw = oldWidth; x < xw; ++x)
{
Color32 c = pixels[y * xw + x];
if (c.a != 0)
{
if (y < ymin)
{
ymin = y;
}
if (y > ymax - 1)
{
ymax = y + 1;
}
if (x < xmin)
{
xmin = x;
}
if (x > xmax - 1)
{
xmax = x + 1;
}
}
}
}
if (xmin > intRectMinX)
{
xmin = intRectMinX;
}
if (ymin > intRectMinY)
{
ymin = intRectMinY;
}
if (xmax < intRectMaxX)
{
xmax = intRectMaxX;
}
if (ymax < intRectMaxY)
{
ymax = intRectMaxY;
}
if (xmax - xmin > 0 && ymax - ymin > 0)
{
optimizeWidth = xmax - xmin;
optimizeHeight = ymax - ymin;
mainTexture2 = new Texture2D(xmax - xmin, ymax - ymin);
mainTexture2.SetPixels(mainTexture.GetPixels(xmin, ymin, xmax - xmin, ymax - ymin));
mainTexture2.Apply();
GameObject.DestroyImmediate(mainTexture);
mainTexture = mainTexture2;
}
}
#endregion
prog = 0.5f;
EditorUtility.DisplayCancelableProgressBar("Creating Spritesheet", "Auto Build Atlas Sprites", prog);
#region Write New File
byte[] byt = mainTexture.EncodeToPNG();
if (texturePath != "")
{
System.IO.File.WriteAllBytes(texturePath, byt);
AssetDatabase.Refresh(ImportAssetOptions.ForceUpdate);
}
AssetDatabase.ImportAsset(texturePath);
#endregion
EditorUtility.ClearProgressBar();
prog = 0.6f;
EditorUtility.DisplayCancelableProgressBar("Creating Spritesheet", "Auto Build Atlas Sprites", prog);
mainTexture = AssetDatabase.LoadAssetAtPath(texturePath, typeof(Texture2D)) as Texture2D;
TextureImporter ti = AssetImporter.GetAtPath(texturePath) as TextureImporter;
TextureImporterSettings settings = new TextureImporterSettings();
ti.ReadTextureSettings(settings);
SpriteMetaData[] lstMetaSprite = new SpriteMetaData[listSprite.Count];
if (append)
{
if (ti.spritesheet != null && ti.spritesheet.Length > 0)
{
append = true;
lstMetaSprite = ti.spritesheet;
}
else
{
append = false;
}
}
for (int i = 0; i < lstMetaSprite.Length; i++)
{
if (i < rects.Length)
{
SpriteMetaData metaSprite = new SpriteMetaData();
if (append)
{
metaSprite = lstMetaSprite[i];
}
metaSprite.name = listSprite[i].name;
Rect rectInfo = listSprite[i].GetSpriteRect();
Rect rect = new Rect(rects[i].x * cacheWidth - xmin, rects[i].y * cacheHeight - ymin, rectInfo.width, rectInfo.height);
if (rect.x + rect.width > optimizeWidth)
{
rect.width = optimizeWidth - rect.x;
}
if (rect.y + rect.height > optimizeHeight)
{
rect.height = optimizeHeight - rect.y;
}
metaSprite.rect = rect;
int oWidth = listSprite[i].originalRect.width;
int oHeight = listSprite[i].originalRect.height;
if (oWidth < 1)
{
oWidth = 1;
}
if (oHeight < 1)
{
oHeight = 1;
}
int xLeft = listSprite[i].startX;
int yTop = listSprite[i].startY;
if (listSprite[i].IsOptimize())
{
float pivotX = listSprite[i].pivot.x * listSprite[i].originalRect.width;
float pivotY = listSprite[i].pivot.y * listSprite[i].originalRect.height;
pivotX = pivotX - xLeft;
pivotY = pivotY - yTop;
pivotX = pivotX / listSprite[i].optimizeRect.width;
pivotY = pivotY / listSprite[i].optimizeRect.height;
listSprite[i].SetPivot(new Vector2(pivotX, pivotY));
metaSprite.pivot = new Vector2(pivotX, pivotY);
metaSprite.alignment = ImportTextureUtil.GetAlignment(metaSprite.pivot); // listSprite[i].alignment;
if (dicPivot != null)
{
foreach (KeyValuePair <string, EAPInfoAttachment> pair in dicPivot)
{
if (pair.Value.spriteName == metaSprite.name)
{
pair.Value.SetCache(xLeft, yTop, listSprite[i].originalRect, listSprite[i].optimizeRect);
}
}
}
}
else
{
metaSprite.pivot = listSprite[i].pivot;
metaSprite.alignment = ImportTextureUtil.GetAlignment(metaSprite.pivot);
}
lstMetaSprite[i] = metaSprite;
}
}
prog = 0.7f;
EditorUtility.DisplayCancelableProgressBar("Creating Spritesheet", "Auto Build Atlas Sprites", prog);
ti.isReadable = true;
ti.mipmapEnabled = false;
ti.spritesheet = lstMetaSprite;
ti.textureType = TextureImporterType.Sprite;
ti.spriteImportMode = SpriteImportMode.Multiple;
ti.spritePixelsPerUnit = 100;
settings.textureFormat = TextureImporterFormat.ARGB32;
settings.npotScale = TextureImporterNPOTScale.None;
settings.alphaIsTransparency = true;
ti.SetTextureSettings(settings);
ti.maxTextureSize = 4096;
ti.mipmapEnabled = false;
ti.spriteImportMode = SpriteImportMode.Multiple;
AssetDatabase.ImportAsset(texturePath);
EditorUtility.SetDirty(mainTexture);
AssetDatabase.Refresh(ImportAssetOptions.ForceUpdate);
AssetDatabase.ImportAsset(texturePath);
prog = 1.0f;
EditorUtility.DisplayCancelableProgressBar("Creating Spritesheet", "Auto Build Atlas Sprites", prog);
EditorUtility.ClearProgressBar();
// douple setting for fix Unity 5.5
ti.textureType = TextureImporterType.Sprite;
ti.spriteImportMode = SpriteImportMode.Multiple;
EditorUtility.SetDirty(mainTexture);
AssetDatabase.Refresh(ImportAssetOptions.ForceUpdate);
AssetDatabase.ImportAsset(texturePath);
/*for(int i=0;i<listSprite.Count;i++)
* {
* listSprite[i].FreeMemory();
* }*/
System.GC.Collect();
return(true);
}
catch (UnityException ex)
{
Debug.LogError("Error:" + ex.Message);
EditorUtility.ClearProgressBar();
return(false);
}
catch (System.Exception ex)
{
Debug.LogError("Error:" + ex.Message);
EditorUtility.ClearProgressBar();
return(false);
}
}
static public bool AutoBuildAtlasFromListTexture(List <Texture2D> listTexture, List <DataAnimAnalytics> listJsonAnim, TrimType trimType, string texturePath, int pading)
{
float prog = 0.0f;
EditorUtility.DisplayCancelableProgressBar("Collecting Textures", "Process...", prog);
try
{
Dictionary <string, EAPInfoAttachment> dicPivot = new Dictionary <string, EAPInfoAttachment>();
for (int i = 0; i < listJsonAnim.Count; i++)
{
DataAnimAnalytics dataAnalytic = listJsonAnim[i];
foreach (KeyValuePair <string, EAPInfoAttachment> pair in dataAnalytic.jsonFinal.dicPivot)
{
dicPivot[pair.Value.spriteName] = pair.Value;
}
}
List <SpriteElement> listSprite = new List <SpriteElement>();
for (int i = 0; i < listTexture.Count; i++)
{
Object obj = listTexture[i];
if (obj is Texture2D)
{
Texture2D tex = (Texture2D)obj;
SpriteElement element = new SpriteElement(tex);
if (trimType == TrimType.Trim2nTexture || trimType == TrimType.TrimMinimum)
{
if (!element.TrimTexture())
{
element.CloneFromOriginTexture();
}
}
else
{
element.CloneFromOriginTexture();
}
foreach (KeyValuePair <string, EAPInfoAttachment> pair in dicPivot)
{
if (pair.Value.spriteName == tex.name)
{
//Debug.LogError(pair.Value.spriteName);
element.SetPivot(new Vector2(pair.Value.x, pair.Value.y));
break;
}
}
listSprite.Add(element);
prog = (float)(i + 1) / listTexture.Count;
EditorUtility.DisplayCancelableProgressBar("Collecting Textures", "Process...", prog);
}
}
if (listSprite.Count > 0)
{
bool result = BuildAtlas(trimType, listSprite, dicPivot, texturePath, pading);
// GC memory
for (int i = 0; i < listSprite.Count; i++)
{
GameObject.DestroyImmediate(listSprite[i].texture);
listSprite[i] = null;
}
return(result);
}
return(false);
}
catch (System.Exception ex)
{
Debug.LogError("Error:" + ex.Message);
EditorUtility.ClearProgressBar();
return(false);
}
}
// cutDownType values: ( PercentOfTrees, Volume, Area )
// trimType values: ( ByTallest, BySmallest, Systematic )
// value: (% de corta)
public override void ApplyCutDown(Parcela oldPlot, Parcela newPlot, CutDownType cutDownType, TrimType trimType, float value)
{
newPlot.VAR_10 = value;
newPlot.H_DOMINANTE = oldPlot.H_DOMINANTE.Value;
double parA1, parA2,
parB0, parB1, parB2, parB3,
parC0, parC1, parC2, parC3,
parD1, parD2,
parA, parB, SEC_NORMAL, tpuBA;
switch (trimType)
{
case TrimType.ByTallest:
break;
case TrimType.BySmallest:
if (cutDownType == CutDownType.Area)
{
parC0 = 1.35;
parC1 = 0.979;
parC2 = 0.859;
tpuBA = value / 100;
newPlot.A_BASIMETRICA = oldPlot.A_BASIMETRICA.Value - tpuBA * oldPlot.A_BASIMETRICA.Value;
newPlot.N_PIESHA = newPlot.A_BASIMETRICA * 40000 / Math.Pow(oldPlot.D_CUADRATICO.Value, 2) * Math.PI;
newPlot.D_CUADRATICO = oldPlot.D_CUADRATICO.Value;
newPlot.VCC = Math.Exp((double)1.69 + 0.0604 * newPlot.SI.Value - 48.8 / newPlot.EDAD.Value + 0.982 * Math.Log(newPlot.A_BASIMETRICA.Value));
}
break;
case TrimType.Systematic:
if (cutDownType == CutDownType.Area)
{
parC0 = 1.35;
parC1 = 0.979;
parC2 = 0.859;
tpuBA = value / 100;
newPlot.A_BASIMETRICA = oldPlot.A_BASIMETRICA.Value - tpuBA * oldPlot.A_BASIMETRICA.Value;
newPlot.N_PIESHA = newPlot.A_BASIMETRICA * 40000 / Math.Pow(oldPlot.D_CUADRATICO.Value, 2) * Math.PI;
newPlot.D_CUADRATICO = oldPlot.D_CUADRATICO.Value;
newPlot.VCC = Math.Exp((double)1.69 + 0.0604 * newPlot.SI.Value - 48.8 / newPlot.EDAD.Value + 0.982 * Math.Log(newPlot.A_BASIMETRICA.Value));
}
break;
}
}
private void Screenshot_MouseMove(object sender, MouseEventArgs e)
{
long mouseMoveTimeStep = DateTime.Now.Ticks - lastMouseMoveTime;
if (mouseMoveTimeStep > 200)
{
lastMouseMoveTime = DateTime.Now.Ticks;
switch (screenshotStatus)
{
case ScreenshotStatus.SCREENSHOTSTART:
endPoint = e.Location;
break;
case ScreenshotStatus.SCREENSHOTTRIM:
trim_X = trim_X == 0 ? e.X : trim_X;
trim_Y = trim_Y == 0 ? e.Y : trim_Y;
switch (trimType)
{
case TrimType.MOVE:
startPoint.Offset(e.X - trim_X, e.Y - trim_Y);
endPoint.Offset(e.X - trim_X, e.Y - trim_Y);
break;
case TrimType.TOP:
startPoint.Offset(0, e.Y - trim_Y);
break;
case TrimType.TOPLEFT:
startPoint.Offset(e.X - trim_X, e.Y - trim_Y);
break;
case TrimType.TOPRIGHT:
startPoint.Offset(0, e.Y - trim_Y);
endPoint.Offset(e.X - trim_X, 0);
break;
case TrimType.RIGHTR:
endPoint.Offset(e.X - trim_X, 0);
break;
case TrimType.BOTTOMRIGHT:
endPoint.Offset(e.X - trim_X, e.Y - trim_Y);
break;
case TrimType.BOTTOM:
endPoint.Offset(0, e.Y - trim_Y);
break;
case TrimType.BOTTOMLEFT:
startPoint.Offset(e.X - trim_X, 0);
endPoint.Offset(0, e.Y - trim_Y);
break;
case TrimType.LEFT:
startPoint.Offset(e.X - trim_X, 0);
break;
}
trim_X = e.X;
trim_Y = e.Y;
break;
case ScreenshotStatus.SCREENSHOTEND:
if (cancelRect.Contains(e.Location))
{
inBtn = 1;
}
else if (completRect.Contains(e.Location))
{
inBtn = 2;
}
else
{
inBtn = 0;
}
if (blockDic.Count == 9)
{
foreach (KeyValuePair <int, Rectangle> pair in blockDic)
{
if ((pair.Value).Contains(e.Location))
{
switch (pair.Key)
{
case 0:
if (Cursor != Cursors.SizeAll)
{
Cursor = Cursors.SizeAll;
}
trimType = TrimType.MOVE;
break;
case 1:
if (Cursor != Cursors.SizeNWSE)
{
Cursor = Cursors.SizeNWSE;
}
trimType = TrimType.TOPLEFT;
break;
case 2:
if (Cursor != Cursors.SizeNS)
{
Cursor = Cursors.SizeNS;
}
trimType = TrimType.TOP;
break;
case 3:
if (Cursor != Cursors.SizeNESW)
{
Cursor = Cursors.SizeNESW;
}
trimType = TrimType.TOPRIGHT;
break;
case 4:
if (Cursor != Cursors.SizeWE)
{
Cursor = Cursors.SizeWE;
}
trimType = TrimType.RIGHTR;
break;
case 5:
if (Cursor != Cursors.SizeNWSE)
{
Cursor = Cursors.SizeNWSE;
}
trimType = TrimType.BOTTOMRIGHT;
break;
case 6:
if (Cursor != Cursors.SizeNS)
{
Cursor = Cursors.SizeNS;
}
trimType = TrimType.BOTTOM;
break;
case 7:
if (Cursor != Cursors.SizeNESW)
{
Cursor = Cursors.SizeNESW;
}
trimType = TrimType.BOTTOMLEFT;
break;
case 8:
if (Cursor != Cursors.SizeWE)
{
Cursor = Cursors.SizeWE;
}
trimType = TrimType.LEFT;
break;
}
break;
}
else
{
if (Cursor != Cursors.Default)
{
Cursor = Cursors.Default;
}
trimType = TrimType.NONE;
}
}
}
break;
}
Invalidate();
}
}
// cutDownType values: ( PercentOfTrees, Volume, Area )
// trimType values: ( ByTallest, BySmallest, Systematic )
// value: (% de corta)
public override void ApplyCutDown(Parcela oldPlot, Parcela newPlot, CutDownType cutDownType, TrimType trimType, float value)
{
newPlot.VAR_9 = value; // % de corta...
double parA0, parB0, parB1, parB2, parB3;
parA0 = 4.9272;
parB0 = 1.3324;
parB1 = 0.0559;
parB2 = -22.7815;
parB3 = 1.0394;
newPlot.SI = oldPlot.SI.Value;
double parC0, parC1, parC2, SEC_NORMAL;
switch (cutDownType)
{
case CutDownType.PercentOfTrees:
parC0 = 0.531019;
parC1 = 0.989792;
parC2 = 0.517850;
newPlot.N_PIESHA = (1 - value / 100) * oldPlot.N_PIESHA.Value;
newPlot.D_CUADRATICO = parC0 + oldPlot.D_CUADRATICO.Value * (parC1 + parC2 * Math.Pow(value / 100, 2));
SEC_NORMAL = Math.PI * Math.Pow(newPlot.D_CUADRATICO.Value / 2, 2);
newPlot.A_BASIMETRICA = SEC_NORMAL * newPlot.N_PIESHA.Value / 10000;
newPlot.VCC = Math.Exp((double)parB0 + parB1 * newPlot.SI.Value + parB2 / newPlot.EDAD.Value + parB3 * Math.Log(newPlot.A_BASIMETRICA.Value));
break;
case CutDownType.Volume:
break;
case CutDownType.Area:
parC0 = 0.144915;
parC1 = 0.969819;
parC2 = 0.678010;
newPlot.A_BASIMETRICA = (1 - value / 100) * oldPlot.A_BASIMETRICA.Value;
newPlot.D_CUADRATICO = Math.Pow(parC0 + parC1 * Math.Pow(oldPlot.D_CUADRATICO.Value, 0.5) + parC2 * (value / 100), 2);
SEC_NORMAL = Math.PI * Math.Pow(newPlot.D_CUADRATICO.Value / 200, 2);
newPlot.N_PIESHA = newPlot.A_BASIMETRICA.Value / SEC_NORMAL;
newPlot.VCC = Math.Exp((double)parB0 + parB1 * newPlot.SI.Value + parB2 / newPlot.EDAD.Value + parB3 * Math.Log(newPlot.A_BASIMETRICA.Value));
break;
}
}
static private StringSlice Trim(string inString, int inStartIdx, int inLength, char[] inTrimChars, TrimType inTrimType)
{
if (inString == null)
{
return(StringSlice.Empty);
}
if (inTrimChars == null || inTrimChars.Length == 0 || inTrimType == TrimType.None)
{
return(new StringSlice(inString, inStartIdx, inLength));
}
int trimCount = inTrimChars.Length;
int startIdx = inStartIdx;
int endIdx = startIdx + inLength - 1;
if ((inTrimType & TrimType.Start) == TrimType.Start)
{
while (startIdx <= endIdx)
{
int i = 0;
char c = inString[startIdx];
for (i = 0; i < trimCount; ++i)
{
if (c == inTrimChars[i])
{
break;
}
}
if (i == trimCount)
{
break;
}
++startIdx;
}
}
if ((inTrimType & TrimType.End) == TrimType.End)
{
while (endIdx >= startIdx)
{
int i = 0;
char c = inString[endIdx];
for (i = 0; i < trimCount; ++i)
{
if (c == inTrimChars[i])
{
break;
}
}
if (i == trimCount)
{
break;
}
--endIdx;
}
}
if (startIdx > endIdx)
{
return(StringSlice.Empty);
}
int newLength = endIdx - startIdx + 1;
if (newLength == inLength)
{
return(new StringSlice(inString, inStartIdx, inLength));
}
return(new StringSlice(inString, startIdx, newLength));
}
/// <summary>
/// 元画像を指定の方法で加工した新しい画像を取得します。
/// </summary>
/// <param name="bitmap">元画像を設定します。</param>
/// <param name="trimming">トリミングするかどうかを設定します。</param>
/// <param name="trimmingType">トリミングの基準となる位置を設定します。</param>
/// <param name="line200">200ライン画像とみなすかを設定します。</param>
/// <param name="color8">8色画像とみなすかを設定します。</param>
/// <returns>加工した新しい画像を返します。</returns>
private BitmapSource ProcessImage(BitmapImage bitmap, bool trimming, TrimType trimmingType, bool line200, bool color8)
{
if (HasPalette && BitsPerPixel == 8 && CountUsedColor(bitmap) <= 16)
{
var wBmp = ShrinkBitsPerPixel(bitmap);
if (line200 && wBmp.PixelHeight >= 2)
{
// 200ライン
unsafe
{
wBmp.Lock();
var ptr = (byte *)wBmp.BackBuffer;
for (var y = 1; y < wBmp.PixelHeight; y += 2)
{
byte *sBuffer = ptr + (y - 1) * wBmp.BackBufferStride;
byte *dBuffer = ptr + y * wBmp.BackBufferStride;
for (var offset = 0; offset < wBmp.BackBufferStride; offset++)
{
dBuffer[offset] = sBuffer[offset];
}
}
wBmp.Unlock();
}
}
if (trimming)
{
// トリミング
unsafe
{
wBmp.Lock();
int sx, sy, ex, ey, oColorIndex;
var width = bitmap.PixelWidth;
var height = bitmap.PixelHeight;
var ptr = (byte *)wBmp.BackBuffer;
// 左上 or 右下 のパレットを取得
byte *oPtr = ptr + (trimmingType == TrimType.LeftTop ? 0 : (bitmap.PixelHeight - 1) * wBmp.BackBufferStride + (width - 1) / 2);
// トリミングするカラーインデックスを取得
if ((width - 1) % 2 == 0)
{
oColorIndex = *oPtr >> 4;
}
else
{
oColorIndex = *oPtr & 0x0f;
}
// 上端取得
for (sy = 0; sy < height; sy++)
{
var check = false;
for (var x = 0; x < width; x++)
{
byte *pixel = ptr + sy * wBmp.BackBufferStride + x / 2;
var dColorIndex = (x % 2 == 0) ? *pixel >> 4 : *pixel & 0x0f;
if (dColorIndex != oColorIndex)
{
check = true;
break;
}
}
if (check)
{
break;
}
}
// 下端取得
for (ey = height - 1; ey >= 0; ey--)
{
var check = false;
for (var x = 0; x < width; x++)
{
byte *pixel = ptr + ey * wBmp.BackBufferStride + x / 2;
var dColorIndex = (x % 2 == 0) ? *pixel >> 4 : *pixel & 0x0f;
if (dColorIndex != oColorIndex)
{
check = true;
break;
}
}
if (check)
{
break;
}
}
// 左端取得
for (sx = 0; sx < width; sx++)
{
var check = false;
for (var y = 0; y < height; y++)
{
byte *pixel = ptr + y * wBmp.BackBufferStride + sx / 2;
int dColorIndex = (sx % 2 == 0) ? *pixel >> 4 : *pixel & 0x0f;
if (dColorIndex != oColorIndex)
{
check = true;
break;
}
}
if (check)
{
break;
}
}
// 右端取得
for (ex = width - 1; ex >= 0; ex--)
{
var check = false;
for (var y = 0; y < height; y++)
{
byte *pixel = ptr + y * wBmp.BackBufferStride + ex / 2;
int dColorIndex = (ex % 2 == 0) ? *pixel >> 4 : *pixel & 0x0f;
if (dColorIndex != oColorIndex)
{
check = true;
break;
}
}
if (check)
{
break;
}
}
wBmp.Unlock();
if (sx <= ex || sy <= ey)
{
return(new CroppedBitmap(wBmp, new Int32Rect(sx, sy, ex - sx + 1, ey - sy + 1)) as BitmapSource);
}
}
}
return(wBmp);
}
return(bitmap);
}
// This function is used to prevent long quotations in error messages, SQLBUDT 222626
private static void AppendTrimmed(StringBuilder sb, string value, int startIndex, int count, TrimType trimType)
{
const int TrimSize = 32;
const string TrimMarker = "...";
if (count <= TrimSize)
{
sb.Append(value, startIndex, count);
}
else
{
switch (trimType)
{
case TrimType.Left:
sb.Append(TrimMarker);
sb.Append(value, startIndex + count - TrimSize, TrimSize);
break;
case TrimType.Right:
sb.Append(value, startIndex, TrimSize);
sb.Append(TrimMarker);
break;
case TrimType.Middle:
sb.Append(value, startIndex, TrimSize / 2);
sb.Append(TrimMarker);
sb.Append(value, startIndex + count - TrimSize / 2, TrimSize / 2);
break;
}
}
}
// cutDownType values: ( PercentOfTrees, Volume, Area )
// trimType values: ( ByTallest, BySmallest, Systematic )
// value: (% de corta)
public override void ApplyCutDown(Parcela oldPlot, Parcela newPlot, CutDownType cutDownType, TrimType trimType, float value)
{
newPlot.VAR_9 = value;
//Indice de calidad
double IC = oldPlot.SI.Value / 10;
// H_DOMINANTE:
double parA17, parB17, parC17, parA29, parB29, parC29;
parA17 = 1.9962;
parB17 = 0.2642;
parC17 = 0.46;
parA29 = 3.1827;
parB29 = 0.3431;
parC29 = 0.3536;
double H0_17 = 10 * parA17 * Math.Pow(1 - Math.Exp((double)-1 * parB17 * newPlot.EDAD.Value / 10), 1 / parC17);
double H0_29 = 10 * parA29 * Math.Pow(1 - Math.Exp((double)-1 * parB29 * newPlot.EDAD.Value / 10), 1 / parC29);
newPlot.VAR_2 = H0_17;
newPlot.VAR_3 = H0_29;
newPlot.H_DOMINANTE = H0_17 + (H0_29 - H0_17) * (IC - 1.7) / 1.2;
// parametros de volumen y área basimétrica
double parA0, parB0, parB1, parB2, parB3;
parA0 = 5.103222;
parB0 = 1.42706;
parB1 = 0.388317;
parB2 = -30.691629;
parB3 = 1.034549;
// parametros de corta
double parC0, parC1, parC2, SEC_NORMAL, tpuN, tpuBA;
switch (cutDownType)
{
case CutDownType.PercentOfTrees:
parC0 = 0.531019;
parC1 = 0.989792;
parC2 = 0.517850;
tpuN = value / 100;
newPlot.N_PIESHA = (1 - tpuN) * oldPlot.N_PIESHA.Value;
newPlot.D_CUADRATICO = parC0 + parC1 * oldPlot.D_CUADRATICO + parC2 * oldPlot.D_CUADRATICO.Value * Math.Pow(tpuN, 2);
SEC_NORMAL = Math.PI * Math.Pow(newPlot.D_CUADRATICO.Value / 2, 2);
newPlot.A_BASIMETRICA = SEC_NORMAL * newPlot.N_PIESHA.Value / 10000;
newPlot.VCC = Math.Exp((double)parB0 + parB1 * IC + parB2 / newPlot.EDAD.Value + parB3 * Math.Log(newPlot.A_BASIMETRICA.Value));
break;
case CutDownType.Volume:
break;
case CutDownType.Area:
parC0 = 0.144915;
parC1 = 0.969819;
parC2 = 0.678010;
tpuBA = value / 100;
newPlot.A_BASIMETRICA = (1 - tpuBA) * oldPlot.A_BASIMETRICA.Value;
newPlot.D_CUADRATICO = Math.Pow(parC0 + parC1 * Math.Pow(oldPlot.D_CUADRATICO.Value, 0.5) + parC2 * (tpuBA), 2);
SEC_NORMAL = Math.PI * Math.Pow(newPlot.D_CUADRATICO.Value / 200, 2);
newPlot.N_PIESHA = newPlot.A_BASIMETRICA.Value / SEC_NORMAL;
newPlot.VCC = Math.Exp((double)parB0 + parB1 * IC + parB2 / newPlot.EDAD.Value + parB3 * Math.Log(newPlot.A_BASIMETRICA.Value));
break;
}
}
private void Trim(TrimType type)
{
string data = Singleton.Instance<SavedData>().Variables[_textActionData.SourceVar].GetValue();
char ch;
if (_searchString == "\\r")
ch = '\r';
else if (_searchString == "\\n")
ch = '\n';
else
ch = Convert.ToChar(_searchString);
if (type == TrimType.Trim)
data = data.Trim(ch);
else if (type == TrimType.TrimEnd)
data = data.TrimEnd(ch);
else if (type == TrimType.TrimStart)
data = data.TrimStart(ch);
Singleton.Instance<SavedData>().Variables[_textActionData.TargetVar].SetValue(data);
ActionStatus = Enums.Status.Pass;
AutoApp.Logger.WritePassLog(string.Format("{0} String Completed", type));
}
/// <summary>
/// 指定されたエンコーダーで画像を保存します。
/// </summary>
/// <param name="codec">エンコードするためのコーデック情報を設定します。</param>
/// <param name="directory">保存するパスを設定します。</param>
/// <param name="removeSource">元画像を削除するかどうかを設定します。</param>
/// <param name="trimming">トリミングするかどうかを設定します。</param>
/// <param name="trimmingType">トリミングの基準となる位置を設定します。</param>
/// <param name="line200">200ライン画像とみなすかを設定します。</param>
/// <param name="color8">8色画像とみなすかを設定します。</param>
public SaveResult Save(CodecInfo codec, string directory, bool removeSource, bool trimming, TrimType trimmingType, bool line200, bool color8)
{
if (!IsProcessed)
{
var filename = $"{Path.GetFileNameWithoutExtension(Filename)}{codec.Extension}";
var path = Path.Combine(directory ?? Directory, filename);
var bitmap = LoadImage();
var pBitmap = ProcessImage(bitmap, trimming, trimmingType, line200, color8);
var encoder = (BitmapEncoder)Activator.CreateInstance(codec.EncoderType);
encoder.Frames.Add(BitmapFrame.Create(pBitmap));
using (var stream = File.OpenWrite(path))
{
encoder.Save(stream);
stream.Close();
}
// 元画像削除オンで出力したファイル名が異なる場合は削除
if (removeSource && Filename != filename)
{
File.Delete(fullPath);
}
IsProcessed = true;
return(SaveResult.Processed);
}
return(SaveResult.Skipped);
}
