Vector3 Deform(Vector3 p, float off, MegaRope rope, float alpha)
{
Vector3 np = rope.Interp(alpha); //tm.MultiplyPoint3x4(rope.Interp(alpha));
T = rope.Velocity(alpha).normalized;
wtm = rope.CalcFrame(T, ref N, ref B);
//wtm.SetRow(3, np);
MegaMatrix.SetTrans(ref wtm, np);
return(p);
}
// This will take a selected object and deform that along the spline
public override void BuildMesh(MegaRope rope)
{
// Option to stretch the mesh to fit, and end to start from
if ( source )
{
if ( overts == null )
{
Rebuild(rope);
//Mesh smesh = MegaUtils.GetMesh(source);
//bounds = smesh.bounds;
//sverts = smesh.vertices;
//verts = new Vector3[smesh.vertexCount];
}
// Calc frames
if ( frames == null || frames.Length != numframes + 1 )
{
frames = new Matrix4x4[numframes + 1];
}
wtm = rope.GetDeformMat(0.0f);
T = wtm.MultiplyPoint3x4(rope.Velocity(0.0f).normalized);
// Calc vector to use for cp based on velocity of first point
Vector3 cp = wtm.MultiplyPoint3x4(tm.MultiplyPoint3x4(Vector3.right));
N = (cp - wtm.MultiplyPoint3x4(rope.Interp(0.0f))).normalized;
B = Vector3.Cross(T, N);
frames[0] = wtm;
for ( int i = 0; i <= numframes; i++ )
{
float alpha = (float)i / (float)numframes;
if ( i == 0 )
{
alpha = 0.001f;
}
T = rope.Velocity(alpha).normalized;
frames[i] = rope.CalcFrame(T, ref N, ref B);
}
int ax = (int)meshaxis;
Vector3 sscl = scale; //StartScale * GlobalScale;
//Vector3 soff = Vector3.Scale(offset, sscl);
tm = Matrix4x4.identity;
//wtm = rope.GetDeformMat(0.0f);
//T = wtm.MultiplyPoint3x4(rope.Velocity(0.0f).normalized);
// Calc vector to use for cp based on velocity of first point
//Vector3 cp = wtm.MultiplyPoint3x4(tm.MultiplyPoint3x4(Vector3.right));
//N = (cp - wtm.MultiplyPoint3x4(rope.Interp(0.0f))).normalized;
//B = Vector3.Cross(T, N);
float off = 0.0f;
float min = bounds.min[ax];
float sz = bounds.size[ax];
//float alpha = 0.0f;
//Debug.Log("min " + min + "sz " + sz);
off -= bounds.min[(int)meshaxis] * sscl[ax];
if ( !stretchtofit )
{
sz = rope.RopeLength;
}
for ( int i = 0; i < sverts.Length; i++ )
{
Vector3 p = sverts[i];
float alpha = Mathf.Clamp01((p[ax] - min) / sz); // can pre calc
//if ( alpha > 1.0f || alpha < 0.0f )
//{
// Debug.Log("Alpha " + alpha + " val " + p[ax]);
//}
MegaMatrix.SetTrans(ref frames[(int)(alpha * numframes)], rope.Interp(alpha));
p[ax] = 0.0f;
p.x *= scale.x;
p.y *= scale.y;
p.z *= scale.z;
//p = Deform(p, off, rope, alpha);
overts[i] = frames[(int)(alpha * numframes)].MultiplyPoint3x4(p);
}
// Going to need Mega Normal calculator here potentially
rope.mesh.vertices = overts;
rope.mesh.RecalculateBounds();
//rope.mesh.RecalculateNormals();
RecalcNormals(rope.mesh, overts);
}
}
Vector3 Deform(Vector3 p, float off, MegaRope rope, float alpha)
{
Vector3 np = rope.Interp(alpha); //tm.MultiplyPoint3x4(rope.Interp(alpha));
T = rope.Velocity(alpha).normalized;
wtm = rope.CalcFrame(T, ref N, ref B);
//wtm.SetRow(3, np);
MegaMatrix.SetTrans(ref wtm, np);
return p;
}
// This will take a selected object and deform that along the spline
public override void BuildMesh(MegaRope rope)
{
// Option to stretch the mesh to fit, and end to start from
if (source)
{
if (overts == null)
{
Rebuild(rope);
//Mesh smesh = MegaUtils.GetMesh(source);
//bounds = smesh.bounds;
//sverts = smesh.vertices;
//verts = new Vector3[smesh.vertexCount];
}
// Calc frames
if (frames == null || frames.Length != numframes + 1)
{
frames = new Matrix4x4[numframes + 1];
}
wtm = rope.GetDeformMat(0.0f);
T = wtm.MultiplyPoint3x4(rope.Velocity(0.0f).normalized);
// Calc vector to use for cp based on velocity of first point
Vector3 cp = wtm.MultiplyPoint3x4(tm.MultiplyPoint3x4(Vector3.right));
N = (cp - wtm.MultiplyPoint3x4(rope.Interp(0.0f))).normalized;
B = Vector3.Cross(T, N);
frames[0] = wtm;
for (int i = 0; i <= numframes; i++)
{
float alpha = (float)i / (float)numframes;
if (i == 0)
{
alpha = 0.001f;
}
T = rope.Velocity(alpha).normalized;
frames[i] = rope.CalcFrame(T, ref N, ref B);
}
int ax = (int)meshaxis;
Vector3 sscl = scale; //StartScale * GlobalScale;
//Vector3 soff = Vector3.Scale(offset, sscl);
tm = Matrix4x4.identity;
//wtm = rope.GetDeformMat(0.0f);
//T = wtm.MultiplyPoint3x4(rope.Velocity(0.0f).normalized);
// Calc vector to use for cp based on velocity of first point
//Vector3 cp = wtm.MultiplyPoint3x4(tm.MultiplyPoint3x4(Vector3.right));
//N = (cp - wtm.MultiplyPoint3x4(rope.Interp(0.0f))).normalized;
//B = Vector3.Cross(T, N);
float off = 0.0f;
float min = bounds.min[ax];
float sz = bounds.size[ax];
//float alpha = 0.0f;
//Debug.Log("min " + min + "sz " + sz);
off -= bounds.min[(int)meshaxis] * sscl[ax];
if (!stretchtofit)
{
sz = rope.RopeLength;
}
for (int i = 0; i < sverts.Length; i++)
{
Vector3 p = sverts[i];
float alpha = Mathf.Clamp01((p[ax] - min) / sz); // can pre calc
//if ( alpha > 1.0f || alpha < 0.0f )
//{
// Debug.Log("Alpha " + alpha + " val " + p[ax]);
//}
MegaMatrix.SetTrans(ref frames[(int)(alpha * numframes)], rope.Interp(alpha));
p[ax] = 0.0f;
p.x *= scale.x;
p.y *= scale.y;
p.z *= scale.z;
//p = Deform(p, off, rope, alpha);
overts[i] = frames[(int)(alpha * numframes)].MultiplyPoint3x4(p);
}
// Going to need Mega Normal calculator here potentially
rope.mesh.vertices = overts;
rope.mesh.RecalculateBounds();
//rope.mesh.RecalculateNormals();
RecalcNormals(rope.mesh, overts);
}
}
public override void BuildMesh(MegaRope rope)
{
float lengthuvtile = uvtiley * rope.RopeLength;
Twist = TwistPerUnit * rope.RopeLength;
segments = (int)(rope.RopeLength * SegsPerUnit);
float off = (rope.radius * 0.5f) + offset;
float sradius = 0.0f;
if (strands == 1)
{
off = offset;
sradius = rope.radius;
}
else
{
sradius = (rope.radius * 0.5f) + strandRadius;
}
BuildCrossSection(sradius);
int vcount = ((segments + 1) * (sides + 1)) * strands;
int tcount = ((sides * 2) * segments) * strands;
if (cap)
{
vcount += ((sides + 1) * 2) * strands;
tcount += (sides * 2) * strands;
}
if (verts == null || verts.Length != vcount)
{
verts = new Vector3[vcount];
}
bool builduvs = false;
if (uvs == null || uvs.Length != vcount)
{
uvs = new Vector2[vcount];
tris = new int[tcount * 3];
builduvs = true;
}
//mat = Matrix4x4.identity;
tm = Matrix4x4.identity;
switch (rope.axis)
{
case MegaAxis.X: MegaMatrix.RotateY(ref tm, -Mathf.PI * 0.5f); break;
case MegaAxis.Y: MegaMatrix.RotateX(ref tm, -Mathf.PI * 0.5f); break;
case MegaAxis.Z: break;
}
//switch ( rope.RopeUp )
//{
// case MegaAxis.X: ropeup = Vector3.right; break;
// case MegaAxis.Y: ropeup = Vector3.up; break;
// case MegaAxis.Z: ropeup = Vector3.forward; break;
//}
// We only need to refresh the verts, tris and uvs are done once
int vi = 0;
int ti = 0;
Vector2 uv = Vector2.zero;
Vector3 soff = Vector3.zero;
//Vector3 up = Vector3.up;
Vector3 T = Vector3.zero;
Vector3 N = Vector3.zero;
Vector3 B = Vector3.zero;
for (int s = 0; s < strands; s++)
{
//rollingquat = Quaternion.identity;
float ang = ((float)s / (float)strands) * Mathf.PI * 2.0f;
soff.x = Mathf.Sin(ang) * off;
soff.z = Mathf.Cos(ang) * off;
//Matrix.SetTrans(ref tm, soff);
int vo = vi;
// Cap maybe needs to be submesh, at least needs seperate verts
if (cap)
{
// Add slice at 0
float alpha = 0.0f;
wtm = rope.GetDeformMat(alpha);
//wtm = rope.GetDeformMat(alpha, up);
//float uvt = alpha * uvtwist;
float tst = alpha * Twist * Mathf.PI * 2.0f;
soff.x = Mathf.Sin(ang + tst) * off;
soff.z = Mathf.Cos(ang + tst) * off;
//int ovi = vi;
for (int v = 0; v <= cross.Length; v++)
{
Vector3 p = tm.MultiplyPoint3x4(cross[v % cross.Length] + soff);
verts[vi] = wtm.MultiplyPoint3x4(p); //cross[v]);
if (builduvs)
{
uv.y = 0.0f; //alpha * uvtiley;
uv.x = 0.0f; //(((float)v / (float)cross.Length) * uvtilex) + uvt;
uvs[vi++] = uv;
}
else
{
vi++;
}
}
//up = wtm.MultiplyPoint3x4(tm.MultiplyPoint3x4(cross[0])).normalized;
if (builduvs)
{
for (int sd = 1; sd < sides; sd++)
{
tris[ti++] = vo;
tris[ti++] = vo + sd + 1;
tris[ti++] = vo + sd;
}
}
vo = vi;
// Other end
alpha = 1.0f;
wtm = rope.GetDeformMat(alpha);
//wtm = rope.CalcFrame(T, ref N, ref B);
//uvt = alpha * uvtwist;
tst = alpha * Twist * Mathf.PI * 2.0f;
soff.x = Mathf.Sin(ang + tst) * off;
soff.z = Mathf.Cos(ang + tst) * off;
for (int v = 0; v <= cross.Length; v++)
{
Vector3 p = tm.MultiplyPoint3x4(cross[v % cross.Length] + soff);
verts[vi] = wtm.MultiplyPoint3x4(p); //cross[v]);
if (builduvs)
{
uv.y = 0.0f; //alpha * uvtiley;
uv.x = 0.0f; //(((float)v / (float)cross.Length) * uvtilex) + uvt;
uvs[vi++] = uv;
}
else
{
vi++;
}
}
if (builduvs)
{
for (int sd = 1; sd < sides; sd++)
{
tris[ti++] = vo;
tris[ti++] = vo + sd;
tris[ti++] = vo + sd + 1;
}
}
}
vo = vi;
//wtm = rope.GetDeformMat(0.0f);
for (int i = 0; i <= segments; i++)
{
float alpha = ((float)i / (float)segments);
float uvt = alpha * uvtwist;
float tst = (alpha * Twist * Mathf.PI * 2.0f); // + rollang;
soff.x = Mathf.Sin(ang + tst) * off;
soff.z = Mathf.Cos(ang + tst) * off;
if (i == 0)
{
wtm = rope.GetDeformMat(alpha);
T = wtm.MultiplyPoint3x4(rope.Velocity(0.0f).normalized);
Vector3 cp = wtm.MultiplyPoint3x4(tm.MultiplyPoint3x4(cross[0]));
N = (cp - wtm.MultiplyPoint3x4(rope.Interp(0.0f))).normalized;
B = Vector3.Cross(T, N);
}
else
{
Vector3 np = rope.Interp(alpha); //tm.MultiplyPoint3x4(rope.Interp(alpha));
T = rope.Velocity(alpha).normalized;
wtm = rope.CalcFrame(T, ref N, ref B);
//wtm.SetRow(3, np);
MegaMatrix.SetTrans(ref wtm, np);
}
//wtm = rope.GetDeformMat(alpha);
for (int v = 0; v <= cross.Length; v++)
{
Vector3 p = tm.MultiplyPoint3x4(cross[v % cross.Length] + soff);
verts[vi] = wtm.MultiplyPoint3x4(p); //cross[v]);
//if ( true ) //builduvs )
{
uv.y = alpha * lengthuvtile; //uvtiley;
uv.x = (((float)v / (float)cross.Length) * uvtilex) + uvt;
uvs[vi++] = uv;
}
//else
// vi++;
}
// Uv is - to 1 around and alpha along
}
if (builduvs)
{
int sc = sides + 1;
for (int i = 0; i < segments; i++)
{
for (int v = 0; v < cross.Length; v++)
{
tris[ti++] = (i * sc) + v + vo;
tris[ti++] = ((i + 1) * sc) + ((v + 1) % sc) + vo;
tris[ti++] = ((i + 1) * sc) + v + vo;
tris[ti++] = (i * sc) + v + vo;
tris[ti++] = (i * sc) + ((v + 1) % sc) + vo;
tris[ti++] = ((i + 1) * sc) + ((v + 1) % sc) + vo;
}
}
}
}
//Mesh mesh = MegaUtils.GetMesh(rope.gameObject);
if (builduvs)
{
rope.mesh.Clear();
rope.mesh.vertices = verts;
rope.mesh.uv = uvs;
rope.mesh.triangles = tris;
}
else
{
rope.mesh.vertices = verts;
rope.mesh.uv = uvs;
}
rope.mesh.RecalculateBounds();
rope.mesh.RecalculateNormals();
//MeshConstructor.BuildTangents(mesh);
}
public override void BuildMesh(MegaRope rope)
{
float lengthuvtile = uvtiley * rope.RopeLength;
Twist = TwistPerUnit * rope.RopeLength;
segments = (int)(rope.RopeLength * SegsPerUnit);
float off = (rope.radius * 0.5f) + offset;
float sradius = 0.0f;
if ( strands == 1 )
{
off = offset;
sradius = rope.radius;
}
else
sradius = (rope.radius * 0.5f) + strandRadius;
BuildCrossSection(sradius);
int vcount = ((segments + 1) * (sides + 1)) * strands;
int tcount = ((sides * 2) * segments) * strands;
if ( cap )
{
vcount += ((sides + 1) * 2) * strands;
tcount += (sides * 2) * strands;
}
if ( verts == null || verts.Length != vcount )
{
verts = new Vector3[vcount];
}
bool builduvs = false;
if ( uvs == null || uvs.Length != vcount )
{
uvs = new Vector2[vcount];
tris = new int[tcount * 3];
builduvs = true;
}
//mat = Matrix4x4.identity;
tm = Matrix4x4.identity;
switch ( rope.axis )
{
case MegaAxis.X: MegaMatrix.RotateY(ref tm, -Mathf.PI * 0.5f); break;
case MegaAxis.Y: MegaMatrix.RotateX(ref tm, -Mathf.PI * 0.5f); break;
case MegaAxis.Z: break;
}
//switch ( rope.RopeUp )
//{
// case MegaAxis.X: ropeup = Vector3.right; break;
// case MegaAxis.Y: ropeup = Vector3.up; break;
// case MegaAxis.Z: ropeup = Vector3.forward; break;
//}
// We only need to refresh the verts, tris and uvs are done once
int vi = 0;
int ti = 0;
Vector2 uv = Vector2.zero;
Vector3 soff = Vector3.zero;
//Vector3 up = Vector3.up;
Vector3 T = Vector3.zero;
Vector3 N = Vector3.zero;
Vector3 B = Vector3.zero;
for ( int s = 0; s < strands; s++ )
{
//rollingquat = Quaternion.identity;
float ang = ((float)s / (float)strands) * Mathf.PI * 2.0f;
soff.x = Mathf.Sin(ang) * off;
soff.z = Mathf.Cos(ang) * off;
//Matrix.SetTrans(ref tm, soff);
int vo = vi;
// Cap maybe needs to be submesh, at least needs seperate verts
if ( cap )
{
// Add slice at 0
float alpha = 0.0f;
wtm = rope.GetDeformMat(alpha);
//wtm = rope.GetDeformMat(alpha, up);
//float uvt = alpha * uvtwist;
float tst = alpha * Twist * Mathf.PI * 2.0f;
soff.x = Mathf.Sin(ang + tst) * off;
soff.z = Mathf.Cos(ang + tst) * off;
//int ovi = vi;
for ( int v = 0; v <= cross.Length; v++ )
{
Vector3 p = tm.MultiplyPoint3x4(cross[v % cross.Length] + soff);
verts[vi] = wtm.MultiplyPoint3x4(p); //cross[v]);
if ( builduvs )
{
uv.y = 0.0f; //alpha * uvtiley;
uv.x = 0.0f; //(((float)v / (float)cross.Length) * uvtilex) + uvt;
uvs[vi++] = uv;
}
else
vi++;
}
//up = wtm.MultiplyPoint3x4(tm.MultiplyPoint3x4(cross[0])).normalized;
if ( builduvs )
{
for ( int sd = 1; sd < sides; sd++ )
{
tris[ti++] = vo;
tris[ti++] = vo + sd + 1;
tris[ti++] = vo + sd;
}
}
vo = vi;
// Other end
alpha = 1.0f;
wtm = rope.GetDeformMat(alpha);
//wtm = rope.CalcFrame(T, ref N, ref B);
//uvt = alpha * uvtwist;
tst = alpha * Twist * Mathf.PI * 2.0f;
soff.x = Mathf.Sin(ang + tst) * off;
soff.z = Mathf.Cos(ang + tst) * off;
for ( int v = 0; v <= cross.Length; v++ )
{
Vector3 p = tm.MultiplyPoint3x4(cross[v % cross.Length] + soff);
verts[vi] = wtm.MultiplyPoint3x4(p); //cross[v]);
if ( builduvs )
{
uv.y = 0.0f; //alpha * uvtiley;
uv.x = 0.0f; //(((float)v / (float)cross.Length) * uvtilex) + uvt;
uvs[vi++] = uv;
}
else
vi++;
}
if ( builduvs )
{
for ( int sd = 1; sd < sides; sd++ )
{
tris[ti++] = vo;
tris[ti++] = vo + sd;
tris[ti++] = vo + sd + 1;
}
}
}
vo = vi;
//wtm = rope.GetDeformMat(0.0f);
for ( int i = 0; i <= segments; i++ )
{
float alpha = ((float)i / (float)segments);
float uvt = alpha * uvtwist;
float tst = (alpha * Twist * Mathf.PI * 2.0f); // + rollang;
soff.x = Mathf.Sin(ang + tst) * off;
soff.z = Mathf.Cos(ang + tst) * off;
if ( i == 0 )
{
wtm = rope.GetDeformMat(alpha);
T = wtm.MultiplyPoint3x4(rope.Velocity(0.0f).normalized);
Vector3 cp = wtm.MultiplyPoint3x4(tm.MultiplyPoint3x4(cross[0]));
N = (cp - wtm.MultiplyPoint3x4(rope.Interp(0.0f))).normalized;
B = Vector3.Cross(T, N);
}
else
{
Vector3 np = rope.Interp(alpha); //tm.MultiplyPoint3x4(rope.Interp(alpha));
T = rope.Velocity(alpha).normalized;
wtm = rope.CalcFrame(T, ref N, ref B);
//wtm.SetRow(3, np);
MegaMatrix.SetTrans(ref wtm, np);
}
//wtm = rope.GetDeformMat(alpha);
for ( int v = 0; v <= cross.Length; v++ )
{
Vector3 p = tm.MultiplyPoint3x4(cross[v % cross.Length] + soff);
verts[vi] = wtm.MultiplyPoint3x4(p); //cross[v]);
//if ( true ) //builduvs )
{
uv.y = alpha * lengthuvtile; //uvtiley;
uv.x = (((float)v / (float)cross.Length) * uvtilex) + uvt;
uvs[vi++] = uv;
}
//else
// vi++;
}
// Uv is - to 1 around and alpha along
}
if ( builduvs )
{
int sc = sides + 1;
for ( int i = 0; i < segments; i++ )
{
for ( int v = 0; v < cross.Length; v++ )
{
tris[ti++] = (i * sc) + v + vo;
tris[ti++] = ((i + 1) * sc) + ((v + 1) % sc) + vo;
tris[ti++] = ((i + 1) * sc) + v + vo;
tris[ti++] = (i * sc) + v + vo;
tris[ti++] = (i * sc) + ((v + 1) % sc) + vo;
tris[ti++] = ((i + 1) * sc) + ((v + 1) % sc) + vo;
}
}
}
}
//Mesh mesh = MegaUtils.GetMesh(rope.gameObject);
if ( builduvs )
{
rope.mesh.Clear();
rope.mesh.vertices = verts;
rope.mesh.uv = uvs;
rope.mesh.triangles = tris;
}
else
{
rope.mesh.vertices = verts;
rope.mesh.uv = uvs;
}
rope.mesh.RecalculateBounds();
rope.mesh.RecalculateNormals();
//MeshConstructor.BuildTangents(mesh);
}