public static List <Member> ConvertMember2D(List <GsaMember2d> member2ds, ref List <Node> nodes, ref int nodeidcounter)
{
// ensure node id is at least 1
if (nodeidcounter < 1)
{
nodeidcounter = 1;
}
// List to set members in
List <Member> mems = new List <Member>();
#region member2d
// member2Ds
if (member2ds != null)
{
if (member2ds.Count > 0)
{
for (int i = 0; i < member2ds.Count; i++)
{
if (member2ds[i] != null)
{
GsaMember2d member2d = member2ds[i];
Member apiMember = Members.ConvertMember2D(member2d, ref nodes, ref nodeidcounter);
mems.Add(apiMember);
}
}
}
}
#endregion
return(mems);
}
public void TestCreateGsaMem2dFromBrep()
{
// create a list of corner points
List <Point3d> pts = new List <Point3d>();
pts.Add(new Point3d(-3, -4, 0));
pts.Add(new Point3d(5, -2, 0));
pts.Add(new Point3d(6, 7, 0));
pts.Add(new Point3d(-1, 2, 0));
pts.Add(pts[0]); // add initial point to close curve
Polyline pol = new Polyline(pts); // create edge-crv from pts
// create planar brep from polyline
Brep brep = Brep.CreatePlanarBreps(pol.ToNurbsCurve(), 0.001)[0];
// empty lists for inclusion points and lines
List <Point3d> inclpts = new List <Point3d>();
List <Curve> inclcrvs = new List <Curve>();
// create 2d member from brep
GsaMember2d mem = new GsaMember2d(brep, inclcrvs, inclpts);
// set some members
mem.Colour = System.Drawing.Color.White;
mem.ID = 4;
mem.Member.MeshSize = 0.56;
mem.Member.Name = "meminem";
mem.Member.IsDummy = true;
mem.Member.Offset.Z = -0.45;
mem.Member.Property = 2;
mem.Member.Type2D = AnalysisOrder.LINEAR;
mem.Member.Type = MemberType.SLAB;
Assert.AreEqual(mem.Brep.Vertices[0].Location.X, mem.Topology[0].X);
Assert.AreEqual(mem.Brep.Vertices[0].Location.Y, mem.Topology[0].Y);
Assert.AreEqual(mem.Brep.Vertices[1].Location.X, mem.Topology[1].X);
Assert.AreEqual(mem.Brep.Vertices[1].Location.Y, mem.Topology[1].Y);
Assert.AreEqual(mem.Brep.Vertices[2].Location.X, mem.Topology[2].X);
Assert.AreEqual(mem.Brep.Vertices[2].Location.Y, mem.Topology[2].Y);
Assert.AreEqual(mem.Brep.Vertices[3].Location.X, mem.Topology[3].X);
Assert.AreEqual(mem.Brep.Vertices[3].Location.Y, mem.Topology[3].Y);
Assert.AreEqual(mem.Brep.Vertices[0].Location.X, mem.Topology[4].X);
Assert.AreEqual(mem.Brep.Vertices[0].Location.Y, mem.Topology[4].Y);
Assert.AreEqual(System.Drawing.Color.FromArgb(255, 255, 255, 255), mem.Member.Colour);
Assert.AreEqual(4, mem.ID);
Assert.AreEqual(0.56, mem.Member.MeshSize);
Assert.AreEqual("meminem", mem.Member.Name);
Assert.IsTrue(mem.Member.IsDummy);
Assert.AreEqual(-0.45, mem.Member.Offset.Z);
Assert.AreEqual(2, mem.Member.Property);
Assert.AreEqual(AnalysisOrder.LINEAR, mem.Member.Type2D);
Assert.AreEqual(MemberType.SLAB, mem.Member.Type);
}
public static void ConvertMember2D(List <GsaMember2d> member2ds,
ref Dictionary <int, Member> existingMembers, ref int memberidcounter,
ref Dictionary <int, Node> existingNodes,
ref Dictionary <int, Prop2D> existingProp2Ds, ref Dictionary <Guid, int> prop2d_guid,
GrasshopperAsyncComponent.WorkerInstance workerInstance = null,
Action <string, double> ReportProgress = null)
{
// create a counter for creating new elements, nodes and properties
int nodeidcounter = (existingNodes.Count > 0) ? existingNodes.Keys.Max() + 1 : 1;
if (member2ds != null)
{
for (int i = 0; i < member2ds.Count; i++)
{
if (workerInstance != null)
{
if (workerInstance.CancellationToken.IsCancellationRequested)
{
return;
}
ReportProgress("Mem2D ", (double)i / (member2ds.Count - 1));
}
if (member2ds[i] != null)
{
GsaMember2d member2d = member2ds[i];
ConvertMember2D(member2d,
ref existingMembers, ref memberidcounter,
ref existingNodes, ref nodeidcounter,
ref existingProp2Ds, ref prop2d_guid);
}
}
}
if (workerInstance != null)
{
ReportProgress("Mem2D assembled", -2);
}
}
protected override void SolveInstance(IGH_DataAccess DA)
{
#region GetData
Models = null;
Nodes = null;
Elem1ds = null;
Elem2ds = null;
Elem3ds = null;
Mem1ds = null;
Mem2ds = null;
Mem3ds = null;
Loads = null;
Sections = null;
Prop2Ds = null;
GridPlaneSurfaces = null;
// Get Model input
List <GH_ObjectWrapper> gh_types = new List <GH_ObjectWrapper>();
if (DA.GetDataList(0, gh_types))
{
List <GsaModel> in_models = new List <GsaModel>();
for (int i = 0; i < gh_types.Count; i++)
{
GH_ObjectWrapper gh_typ = gh_types[i];
if (gh_typ == null)
{
Params.Owner.AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Input is null"); return;
}
if (gh_typ.Value is GsaModelGoo)
{
GsaModel in_model = new GsaModel();
gh_typ.CastTo(ref in_model);
in_models.Add(in_model);
}
else
{
string type = gh_typ.Value.GetType().ToString();
type = type.Replace("GhSA.Parameters.", "");
type = type.Replace("Goo", "");
Params.Owner.AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Unable to convert GSA input parameter of type " +
type + " to GsaModel");
return;
}
}
Models = in_models;
}
// Get Section Property input
gh_types = new List <GH_ObjectWrapper>();
if (DA.GetDataList(1, gh_types))
{
List <GsaSection> in_sect = new List <GsaSection>();
List <GsaProp2d> in_prop = new List <GsaProp2d>();
for (int i = 0; i < gh_types.Count; i++)
{
GH_ObjectWrapper gh_typ = gh_types[i];
if (gh_typ.Value is GsaSectionGoo)
{
GsaSection gsasection = new GsaSection();
gh_typ.CastTo(ref gsasection);
in_sect.Add(gsasection.Duplicate());
}
else if (gh_typ.Value is GsaProp2dGoo)
{
GsaProp2d gsaprop = new GsaProp2d();
gh_typ.CastTo(ref gsaprop);
in_prop.Add(gsaprop.Duplicate());
}
else
{
string type = gh_typ.Value.GetType().ToString();
type = type.Replace("GhSA.Parameters.", "");
type = type.Replace("Goo", "");
Params.Owner.AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Unable to convert Prop input parameter of type " +
type + " to GsaSection or GsaProp2d");
return;
}
}
if (in_sect.Count > 0)
{
Sections = in_sect;
}
if (in_prop.Count > 0)
{
Prop2Ds = in_prop;
}
}
// Get Geometry input
gh_types = new List <GH_ObjectWrapper>();
List <GsaNode> in_nodes = new List <GsaNode>();
List <GsaElement1d> in_elem1ds = new List <GsaElement1d>();
List <GsaElement2d> in_elem2ds = new List <GsaElement2d>();
List <GsaElement3d> in_elem3ds = new List <GsaElement3d>();
List <GsaMember1d> in_mem1ds = new List <GsaMember1d>();
List <GsaMember2d> in_mem2ds = new List <GsaMember2d>();
List <GsaMember3d> in_mem3ds = new List <GsaMember3d>();
if (DA.GetDataList(2, gh_types))
{
for (int i = 0; i < gh_types.Count; i++)
{
GH_ObjectWrapper gh_typ = new GH_ObjectWrapper();
gh_typ = gh_types[i];
if (gh_typ.Value is GsaNodeGoo)
{
GsaNode gsanode = new GsaNode();
gh_typ.CastTo(ref gsanode);
in_nodes.Add(gsanode.Duplicate());
}
else if (gh_typ.Value is GsaElement1dGoo)
{
GsaElement1d gsaelem1 = new GsaElement1d();
gh_typ.CastTo(ref gsaelem1);
in_elem1ds.Add(gsaelem1.Duplicate());
}
else if (gh_typ.Value is GsaElement2dGoo)
{
GsaElement2d gsaelem2 = new GsaElement2d();
gh_typ.CastTo(ref gsaelem2);
in_elem2ds.Add(gsaelem2.Duplicate());
}
else if (gh_typ.Value is GsaElement3dGoo)
{
GsaElement3d gsaelem3 = new GsaElement3d();
gh_typ.CastTo(ref gsaelem3);
in_elem3ds.Add(gsaelem3.Duplicate());
}
else if (gh_typ.Value is GsaMember1dGoo)
{
GsaMember1d gsamem1 = new GsaMember1d();
gh_typ.CastTo(ref gsamem1);
in_mem1ds.Add(gsamem1.Duplicate());
}
else if (gh_typ.Value is GsaMember2dGoo)
{
GsaMember2d gsamem2 = new GsaMember2d();
gh_typ.CastTo(ref gsamem2);
in_mem2ds.Add(gsamem2.Duplicate());
}
else if (gh_typ.Value is GsaMember3dGoo)
{
GsaMember3d gsamem3 = new GsaMember3d();
gh_typ.CastTo(ref gsamem3);
in_mem3ds.Add(gsamem3.Duplicate());
}
else
{
string type = gh_typ.Value.GetType().ToString();
type = type.Replace("GhSA.Parameters.", "");
type = type.Replace("Goo", "");
Params.Owner.AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Unable to convert Geometry input parameter of type " +
type + System.Environment.NewLine + " to Node, Element1D, Element2D, Element3D, Member1D, Member2D or Member3D");
return;
}
}
if (in_nodes.Count > 0)
{
Nodes = in_nodes;
}
if (in_elem1ds.Count > 0)
{
Elem1ds = in_elem1ds;
}
if (in_elem2ds.Count > 0)
{
Elem2ds = in_elem2ds;
}
if (in_elem3ds.Count > 0)
{
Elem3ds = in_elem3ds;
}
if (in_mem1ds.Count > 0)
{
Mem1ds = in_mem1ds;
}
if (in_mem2ds.Count > 0)
{
Mem2ds = in_mem2ds;
}
if (in_mem3ds.Count > 0)
{
Mem3ds = in_mem3ds;
}
}
// Get Loads input
gh_types = new List <GH_ObjectWrapper>();
if (DA.GetDataList(3, gh_types))
{
List <GsaLoad> in_loads = new List <GsaLoad>();
List <GsaGridPlaneSurface> in_gps = new List <GsaGridPlaneSurface>();
for (int i = 0; i < gh_types.Count; i++)
{
GH_ObjectWrapper gh_typ = gh_types[i];
if (gh_typ.Value is GsaLoadGoo)
{
GsaLoad gsaload = null;
gh_typ.CastTo(ref gsaload);
in_loads.Add(gsaload.Duplicate());
}
else if (gh_typ.Value is GsaGridPlaneSurfaceGoo)
{
GsaGridPlaneSurface gsaGPS = new GsaGridPlaneSurface();
gh_typ.CastTo(ref gsaGPS);
in_gps.Add(gsaGPS.Duplicate());
}
else
{
string type = gh_typ.Value.GetType().ToString();
type = type.Replace("GhSA.Parameters.", "");
type = type.Replace("Goo", "");
Params.Owner.AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Unable to convert Load input parameter of type " +
type + " to Load or GridPlaneSurface");
return;
}
}
if (in_loads.Count > 0)
{
Loads = in_loads;
}
if (in_gps.Count > 0)
{
GridPlaneSurfaces = in_gps;
}
}
// manually add a warning if no input is set, as all inputs are optional
if (Models == null & Nodes == null & Elem1ds == null & Elem2ds == null &
Mem1ds == null & Mem2ds == null & Mem3ds == null & Sections == null
& Prop2Ds == null & Loads == null & GridPlaneSurfaces == null)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Input parameters failed to collect data");
return;
}
#endregion
#region DoWork
GsaModel analysisModel = null;
if (Models != null)
{
if (Models.Count > 0)
{
if (Models.Count > 1)
{
analysisModel = Util.Gsa.ToGSA.Models.MergeModel(Models);
}
else
{
analysisModel = Models[0].Clone();
}
}
}
if (analysisModel != null)
{
OutModel = analysisModel;
}
else
{
OutModel = new GsaModel();
}
// Assemble model
Model gsa = Util.Gsa.ToGSA.Assemble.AssembleModel(analysisModel, Nodes, Elem1ds, Elem2ds, Elem3ds, Mem1ds, Mem2ds, Mem3ds, Sections, Prop2Ds, Loads, GridPlaneSurfaces);
//gsa.SaveAs(@"C:\Users\Kristjan.Nielsen\Desktop\test3.gwb");
#region meshing
// Create elements from members
gsa.CreateElementsFromMembers();
#endregion
#region analysis
//analysis
IReadOnlyDictionary <int, AnalysisTask> gsaTasks = gsa.AnalysisTasks();
if (gsaTasks.Count < 1)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Remark, "Model contains no Analysis Tasks");
}
foreach (KeyValuePair <int, AnalysisTask> task in gsaTasks)
{
if (!(gsa.Analyse(task.Key)))
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Warning Analysis Case " + task.Key + " could not be analysed");
}
}
#endregion
OutModel.Model = gsa;
//gsa.SaveAs("C:\\Users\\Kristjan.Nielsen\\Desktop\\GsaGH_test.gwb");
#endregion
#region SetData
DA.SetData(0, new GsaModelGoo(OutModel));
#endregion
}
public override void GetData(IGH_DataAccess DA, GH_ComponentParamServer Params)
{
#region GetData
Models = null;
Nodes = null;
Elem1ds = null;
Elem2ds = null;
Elem3ds = null;
Mem1ds = null;
Mem2ds = null;
Mem3ds = null;
Loads = null;
Sections = null;
Prop2Ds = null;
GridPlaneSurfaces = null;
OutModel = null;
component = Params.Owner;
// Get Model input
List <GH_ObjectWrapper> gh_types = new List <GH_ObjectWrapper>();
if (DA.GetDataList(0, gh_types))
{
List <GsaModel> in_models = new List <GsaModel>();
for (int i = 0; i < gh_types.Count; i++)
{
if (gh_types[i] == null)
{
return;
}
GH_ObjectWrapper gh_typ = gh_types[i];
if (gh_typ.Value is GsaModelGoo)
{
GsaModel in_model = new GsaModel();
gh_typ.CastTo(ref in_model);
in_models.Add(in_model);
}
else
{
string type = gh_typ.Value.GetType().ToString();
type = type.Replace("GhSA.Parameters.", "");
type = type.Replace("Goo", "");
Params.Owner.AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Unable to convert GSA input parameter of type " +
type + " to GsaModel");
return;
}
}
Models = in_models;
}
// Get Section Property input
gh_types = new List <GH_ObjectWrapper>();
if (DA.GetDataList(1, gh_types))
{
List <GsaSection> in_sect = new List <GsaSection>();
List <GsaProp2d> in_prop = new List <GsaProp2d>();
for (int i = 0; i < gh_types.Count; i++)
{
if (gh_types[i] == null)
{
return;
}
GH_ObjectWrapper gh_typ = gh_types[i];
if (gh_typ.Value is GsaSectionGoo)
{
GsaSection gsasection = new GsaSection();
gh_typ.CastTo(ref gsasection);
in_sect.Add(gsasection.Duplicate());
}
else if (gh_typ.Value is GsaProp2dGoo)
{
GsaProp2d gsaprop = new GsaProp2d();
gh_typ.CastTo(ref gsaprop);
in_prop.Add(gsaprop.Duplicate());
}
else
{
string type = gh_typ.Value.GetType().ToString();
type = type.Replace("GhSA.Parameters.", "");
type = type.Replace("Goo", "");
Params.Owner.AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Unable to convert Prop input parameter of type " +
type + " to GsaSection or GsaProp2d");
return;
}
}
if (in_sect.Count > 0)
{
Sections = in_sect;
}
if (in_prop.Count > 0)
{
Prop2Ds = in_prop;
}
}
// Get Geometry input
gh_types = new List <GH_ObjectWrapper>();
List <GsaNode> in_nodes = new List <GsaNode>();
List <GsaElement1d> in_elem1ds = new List <GsaElement1d>();
List <GsaElement2d> in_elem2ds = new List <GsaElement2d>();
List <GsaElement3d> in_elem3ds = new List <GsaElement3d>();
List <GsaMember1d> in_mem1ds = new List <GsaMember1d>();
List <GsaMember2d> in_mem2ds = new List <GsaMember2d>();
List <GsaMember3d> in_mem3ds = new List <GsaMember3d>();
if (DA.GetDataList(2, gh_types))
{
for (int i = 0; i < gh_types.Count; i++)
{
if (gh_types[i] == null)
{
return;
}
GH_ObjectWrapper gh_typ = gh_types[i];
if (gh_typ.Value is GsaNodeGoo)
{
GsaNode gsanode = new GsaNode();
gh_typ.CastTo(ref gsanode);
in_nodes.Add(gsanode.Duplicate());
}
else if (gh_typ.Value is GsaElement1dGoo)
{
GsaElement1d gsaelem1 = new GsaElement1d();
gh_typ.CastTo(ref gsaelem1);
in_elem1ds.Add(gsaelem1.Duplicate());
}
else if (gh_typ.Value is GsaElement2dGoo)
{
GsaElement2d gsaelem2 = new GsaElement2d();
gh_typ.CastTo(ref gsaelem2);
in_elem2ds.Add(gsaelem2.Duplicate());
}
else if (gh_typ.Value is GsaElement3dGoo)
{
GsaElement3d gsaelem3 = new GsaElement3d();
gh_typ.CastTo(ref gsaelem3);
in_elem3ds.Add(gsaelem3.Duplicate());
}
else if (gh_typ.Value is GsaMember1dGoo)
{
GsaMember1d gsamem1 = new GsaMember1d();
gh_typ.CastTo(ref gsamem1);
in_mem1ds.Add(gsamem1.Duplicate());
}
else if (gh_typ.Value is GsaMember2dGoo)
{
GsaMember2d gsamem2 = new GsaMember2d();
gh_typ.CastTo(ref gsamem2);
in_mem2ds.Add(gsamem2.Duplicate());
}
else if (gh_typ.Value is GsaMember3dGoo)
{
GsaMember3d gsamem3 = new GsaMember3d();
gh_typ.CastTo(ref gsamem3);
in_mem3ds.Add(gsamem3.Duplicate());
}
else
{
string type = gh_typ.Value.GetType().ToString();
type = type.Replace("GhSA.Parameters.", "");
type = type.Replace("Goo", "");
Params.Owner.AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Unable to convert Geometry input parameter of type " +
type + System.Environment.NewLine + " to Node, Element1D, Element2D, Element3D, Member1D, Member2D or Member3D");
return;
}
}
if (in_nodes.Count > 0)
{
Nodes = in_nodes;
}
if (in_elem1ds.Count > 0)
{
Elem1ds = in_elem1ds;
}
if (in_elem2ds.Count > 0)
{
Elem2ds = in_elem2ds;
}
if (in_elem3ds.Count > 0)
{
Elem3ds = in_elem3ds;
}
if (in_mem1ds.Count > 0)
{
Mem1ds = in_mem1ds;
}
if (in_mem2ds.Count > 0)
{
Mem2ds = in_mem2ds;
}
if (in_mem3ds.Count > 0)
{
Mem3ds = in_mem3ds;
}
}
// Get Loads input
gh_types = new List <GH_ObjectWrapper>();
if (DA.GetDataList(3, gh_types))
{
List <GsaLoad> in_loads = new List <GsaLoad>();
List <GsaGridPlaneSurface> in_gps = new List <GsaGridPlaneSurface>();
for (int i = 0; i < gh_types.Count; i++)
{
if (gh_types[i] == null)
{
return;
}
GH_ObjectWrapper gh_typ = gh_types[i];
if (gh_typ.Value is GsaLoadGoo)
{
GsaLoad gsaload = null;
gh_typ.CastTo(ref gsaload);
in_loads.Add(gsaload.Duplicate());
}
else if (gh_typ.Value is GsaGridPlaneSurfaceGoo)
{
GsaGridPlaneSurface gsaGPS = new GsaGridPlaneSurface();
gh_typ.CastTo(ref gsaGPS);
in_gps.Add(gsaGPS.Duplicate());
}
else
{
string type = gh_typ.Value.GetType().ToString();
type = type.Replace("GhSA.Parameters.", "");
type = type.Replace("Goo", "");
Params.Owner.AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Unable to convert Load input parameter of type " +
type + " to Load or GridPlaneSurface");
return;
}
}
if (in_loads.Count > 0)
{
Loads = in_loads;
}
if (in_gps.Count > 0)
{
GridPlaneSurfaces = in_gps;
}
}
#endregion
// manually add a warning if no input is set, as all inputs are optional
if (Models == null & Nodes == null & Elem1ds == null & Elem2ds == null &
Mem1ds == null & Mem2ds == null & Mem3ds == null & Sections == null
& Prop2Ds == null & Loads == null & GridPlaneSurfaces == null)
{
hasInput = false;
Params.Owner.AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Input parameters failed to collect data");
return;
}
else
{
hasInput = true;
}
}
public static void ConvertMember2D(GsaMember2d member2d,
ref Dictionary <int, Member> existingMembers, ref int memberidcounter,
ref Dictionary <int, Node> existingNodes, ref int nodeidcounter,
ref Dictionary <int, Prop2D> existingProp2Ds, ref Dictionary <Guid, int> prop2d_guid)
{
Member apiMember = member2d.Member;
// update topology list to fit model nodes
string topo = "";
// Loop through the topology list
for (int i = 0; i < member2d.Topology.Count; i++)
{
Point3d pt = member2d.Topology[i];
string topologyType = member2d.TopologyType[i];
if (i > 0)
{
if (topologyType == "" | topologyType == " ")
{
topo += " ";
}
else
{
topo += topologyType.ToLower() + " "; // add topology type (nothing or "a") in front of node id
}
}
int id = Nodes.GetExistingNodeID(existingNodes, pt);
if (id > 0)
{
topo += id;
}
else
{
existingNodes.Add(nodeidcounter, Nodes.NodeFromPoint(pt));
topo += nodeidcounter;
nodeidcounter++;
}
if (i != member2d.Topology.Count - 1)
{
topo += " ";
}
}
// Loop through the voidtopology list
if (member2d.VoidTopology != null)
{
for (int i = 0; i < member2d.VoidTopology.Count; i++)
{
for (int j = 0; j < member2d.VoidTopology[i].Count; j++)
{
Point3d pt = member2d.VoidTopology[i][j];
string voidtopologytype = member2d.VoidTopologyType[i][j];
if (j == 0)
{
topo += " V(";
}
if (voidtopologytype == "" | voidtopologytype == " ")
{
topo += " ";
}
else
{
topo += voidtopologytype.ToLower() + " "; // add topology type (nothing or "a") in front of node id
}
int id = Nodes.GetExistingNodeID(existingNodes, pt);
if (id > 0)
{
topo += id;
}
else
{
existingNodes.Add(nodeidcounter, Nodes.NodeFromPoint(pt));
topo += nodeidcounter;
nodeidcounter++;
}
if (j != member2d.VoidTopology[i].Count - 1)
{
topo += " ";
}
else
{
topo += ")";
}
}
}
}
// Loop through the inclusion lines topology list
if (member2d.IncLinesTopology != null)
{
for (int i = 0; i < member2d.IncLinesTopology.Count; i++)
{
for (int j = 0; j < member2d.IncLinesTopology[i].Count; j++)
{
Point3d pt = member2d.IncLinesTopology[i][j];
string inclineTopologytype = member2d.IncLinesTopologyType[i][j];
if (j == 0)
{
topo += " L(";
}
if (inclineTopologytype == "" | inclineTopologytype == " ")
{
topo += " ";
}
else
{
topo += inclineTopologytype.ToLower() + " "; // add topology type (nothing or "a") in front of node id
}
int id = Nodes.GetExistingNodeID(existingNodes, pt);
if (id > 0)
{
topo += id;
}
else
{
existingNodes.Add(nodeidcounter, Nodes.NodeFromPoint(pt));
topo += nodeidcounter;
nodeidcounter++;
}
if (j != member2d.IncLinesTopology[i].Count - 1)
{
topo += " ";
}
else
{
topo += ")";
}
}
}
}
// Loop through the inclucion point topology list
if (member2d.InclusionPoints != null)
{
for (int i = 0; i < member2d.InclusionPoints.Count; i++)
{
Point3d pt = member2d.InclusionPoints[i];
if (i == 0)
{
topo += " P(";
}
int id = Nodes.GetExistingNodeID(existingNodes, pt);
if (id > 0)
{
topo += id;
}
else
{
existingNodes.Add(nodeidcounter, Nodes.NodeFromPoint(pt));
topo += nodeidcounter;
nodeidcounter++;
}
if (i != member2d.InclusionPoints.Count - 1)
{
topo += " ";
}
else
{
topo += ")";
}
}
}
// update topology for api member
apiMember.Topology = string.Copy(topo);
// section
if (apiMember.Property == 0)
{
apiMember.Property = Prop2ds.ConvertProp2d(member2d.Property, ref existingProp2Ds, ref prop2d_guid);
}
// set apimember in dictionary
if (member2d.ID > 0) // if the ID is larger than 0 than means the ID has been set and we sent it to the known list
{
existingMembers[member2d.ID] = apiMember;
}
else
{
existingMembers.Add(memberidcounter, apiMember);
memberidcounter++;
}
}
public static Member ConvertMember2D(GsaMember2d member2d, ref List <Node> nodes, ref int nodeidcounter)
{
// take out api member
Member apimember = member2d.Member;
// create string to build topology
string topo = "";
#region outline topology
// Loop through the topology list
for (int j = 0; j < member2d.Topology.Count; j++)
{
string topologyType = member2d.TopologyType[j];
if (j > 0)
{
if (topologyType == "" | topologyType == " ")
{
topo += " ";
}
else
{
topo += topologyType.ToLower() + " "; // add topology type (nothing or "a") in front of node id
}
}
Point3d pt = member2d.Topology[j];
Node node = new Node();
node.Position.X = pt.X;
node.Position.Y = pt.Y;
node.Position.Z = pt.Z;
nodes.Add(node);
topo += nodeidcounter++;
if (j != member2d.Topology.Count - 1)
{
topo += " ";
}
}
#endregion
#region voids
// Loop through the voidtopology list
if (member2d.VoidTopology != null)
{
for (int j = 0; j < member2d.VoidTopology.Count; j++)
{
for (int k = 0; k < member2d.VoidTopology[j].Count; k++)
{
string voidtopologytype = member2d.VoidTopologyType[j][k];
if (k == 0)
{
topo += " V(";
}
if (voidtopologytype == "" | voidtopologytype == " ")
{
topo += " ";
}
else
{
topo += voidtopologytype.ToLower() + " "; // add topology type (nothing or "a") in front of node id
}
Point3d pt = member2d.VoidTopology[j][k];
Node node = new Node();
node.Position.X = pt.X;
node.Position.Y = pt.Y;
node.Position.Z = pt.Z;
nodes.Add(node);
topo += nodeidcounter++;
if (k != member2d.VoidTopology[j].Count - 1)
{
topo += " ";
}
else
{
topo += ")";
}
}
}
}
#endregion
#region inclusion lines
// Loop through the inclusion lines topology list
if (member2d.IncLinesTopology != null)
{
for (int j = 0; j < member2d.IncLinesTopology.Count; j++)
{
for (int k = 0; k < member2d.IncLinesTopology[j].Count; k++)
{
string inclineTopologytype = member2d.IncLinesTopologyType[j][k];
if (k == 0)
{
topo += " L(";
}
if (inclineTopologytype == "" | inclineTopologytype == " ")
{
topo += " ";
}
else
{
topo += inclineTopologytype.ToLower() + " "; // add topology type (nothing or "a") in front of node id
}
Point3d pt = member2d.IncLinesTopology[j][k];
Node node = new Node();
node.Position.X = pt.X;
node.Position.Y = pt.Y;
node.Position.Z = pt.Z;
nodes.Add(node);
topo += nodeidcounter++;
if (k != member2d.IncLinesTopology[j].Count - 1)
{
topo += " ";
}
else
{
topo += ")";
}
}
}
}
#endregion
#region inclusion points
// Loop through the inclucion point topology list
if (member2d.InclusionPoints != null)
{
for (int j = 0; j < member2d.InclusionPoints.Count; j++)
{
if (j == 0)
{
topo += " P(";
}
Point3d pt = member2d.InclusionPoints[j];
Node node = new Node();
node.Position.X = pt.X;
node.Position.Y = pt.Y;
node.Position.Z = pt.Z;
nodes.Add(node);
topo += nodeidcounter++;
if (j != member2d.InclusionPoints.Count - 1)
{
topo += " ";
}
else
{
topo += ")";
}
}
}
#endregion
// update topology for api member
apimember.Topology = string.Copy(topo);
return(apimember);
}
protected override void SolveInstance(IGH_DataAccess DA)
{
GH_Brep ghbrep = new GH_Brep();
if (DA.GetData(0, ref ghbrep))
{
Brep brep = new Brep();
if (GH_Convert.ToBrep(ghbrep, ref brep, GH_Conversion.Both))
{
// first import points and curves for inclusion before building member
// 2 Points
List <Point3d> pts = new List <Point3d>();
List <GH_Point> ghpts = new List <GH_Point>();
if (DA.GetDataList(2, ghpts))
{
for (int i = 0; i < ghpts.Count; i++)
{
Point3d pt = new Point3d();
if (GH_Convert.ToPoint3d(ghpts[i], ref pt, GH_Conversion.Both))
{
pts.Add(pt);
}
}
}
// 3 Curves
List <Curve> crvs = new List <Curve>();
List <GH_Curve> ghcrvs = new List <GH_Curve>();
if (DA.GetDataList(3, ghcrvs))
{
for (int i = 0; i < ghcrvs.Count; i++)
{
Curve crv = null;
if (GH_Convert.ToCurve(ghcrvs[i], ref crv, GH_Conversion.Both))
{
crvs.Add(crv);
}
}
}
// now build new member with brep, crv and pts
GsaMember2d mem = new GsaMember2d(brep, crvs, pts);
// add the rest
// 1 section
GH_ObjectWrapper gh_typ = new GH_ObjectWrapper();
GsaProp2d prop2d = new GsaProp2d();
if (DA.GetData(1, ref gh_typ))
{
if (gh_typ.Value is GsaProp2d)
{
gh_typ.CastTo(ref prop2d);
}
else if (gh_typ.Value is GH_Number)
{
if (GH_Convert.ToInt32((GH_Number)gh_typ.Value, out int idd, GH_Conversion.Both))
{
prop2d.ID = idd;
}
}
}
else
{
prop2d.ID = 1;
}
mem.Property = prop2d;
// 4 mesh size
GH_Number ghmsz = new GH_Number();
if (DA.GetData(4, ref ghmsz))
{
GH_Convert.ToDouble(ghmsz, out double m_size, GH_Conversion.Both);
mem.Member.MeshSize = m_size;
}
DA.SetData(0, new GsaMember2dGoo(mem));
}
}
}
protected override void SolveInstance(IGH_DataAccess DA)
{
GH_Brep ghbrep = new GH_Brep();
if (DA.GetData(0, ref ghbrep))
{
if (ghbrep == null)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Brep input is null");
}
Brep brep = new Brep();
if (GH_Convert.ToBrep(ghbrep, ref brep, GH_Conversion.Both))
{
// 1 Points
List <Point3d> pts = new List <Point3d>();
List <GH_Point> ghpts = new List <GH_Point>();
if (DA.GetDataList(1, ghpts))
{
for (int i = 0; i < ghpts.Count; i++)
{
Point3d pt = new Point3d();
if (GH_Convert.ToPoint3d(ghpts[i], ref pt, GH_Conversion.Both))
{
pts.Add(pt);
}
}
}
// 2 Curves
List <Curve> crvs = new List <Curve>();
List <GH_Curve> ghcrvs = new List <GH_Curve>();
if (DA.GetDataList(2, ghcrvs))
{
for (int i = 0; i < ghcrvs.Count; i++)
{
Curve crv = null;
if (GH_Convert.ToCurve(ghcrvs[i], ref crv, GH_Conversion.Both))
{
crvs.Add(crv);
}
}
}
// build new member with brep, crv and pts
GsaMember2d mem = new GsaMember2d(brep, crvs, pts);
// 3 section
GH_ObjectWrapper gh_typ = new GH_ObjectWrapper();
GsaProp2d prop2d = new GsaProp2d();
if (DA.GetData(3, ref gh_typ))
{
if (gh_typ.Value is GsaProp2dGoo)
{
gh_typ.CastTo(ref prop2d);
mem.Property = prop2d;
}
else
{
if (GH_Convert.ToInt32(gh_typ.Value, out int idd, GH_Conversion.Both))
{
mem.Member.Property = idd;
}
else
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Unable to convert PA input to a 2D Property of reference integer");
return;
}
}
}
// 4 mesh size
GH_Number ghmsz = new GH_Number();
if (DA.GetData(4, ref ghmsz))
{
GH_Convert.ToDouble(ghmsz, out double m_size, GH_Conversion.Both);
mem.Member.MeshSize = m_size;
}
DA.SetData(0, new GsaMember2dGoo(mem));
}
public void TestDuplicateMem2d()
{
// create a list of corner points
List <Point3d> pts = new List <Point3d>();
pts.Add(new Point3d(1, 1, 0));
pts.Add(new Point3d(0, 5, 0));
pts.Add(new Point3d(6, 7, 0));
pts.Add(new Point3d(4, 2, 0));
pts.Add(pts[0]); // add initial point to close curve
Polyline pol = new Polyline(pts); // create edge-crv from pts
// create planar brep from polyline
Brep brep = Brep.CreatePlanarBreps(pol.ToNurbsCurve(), 0.001)[0];
// lists for inclusion points and lines
List <Point3d> inclpts = new List <Point3d>();
inclpts.Add(new Point3d(1, 1, 0));
List <Curve> inclcrvs = new List <Curve>();
LineCurve line = new LineCurve(new Point3d(1, 2, 0), new Point3d(3, 2, 0));
inclcrvs.Add(line);
// create 2d member from brep
GsaMember2d original = new GsaMember2d(brep, inclcrvs, inclpts);
// set some members
original.Colour = System.Drawing.Color.Blue;
original.ID = 13;
original.Member.MeshSize = 1.56;
original.Member.Name = "ehbaba";
original.Member.IsDummy = false;
original.Member.Offset.X1 = 0.33;
original.Member.Property = 1;
original.Property = new GsaProp2d();
original.Property.ID = 3;
original.Member.Type2D = AnalysisOrder.RIGID_DIAPHRAGM;
original.Member.Type = MemberType.GENERIC_2D;
// create duplicate
GsaMember2d dup = original.Duplicate();
Assert.AreEqual(original.Brep.Vertices[0].Location.X, dup.Topology[0].X);
Assert.AreEqual(original.Brep.Vertices[0].Location.Y, dup.Topology[0].Y);
Assert.AreEqual(original.Brep.Vertices[1].Location.X, dup.Topology[1].X);
Assert.AreEqual(original.Brep.Vertices[1].Location.Y, dup.Topology[1].Y);
Assert.AreEqual(original.Brep.Vertices[2].Location.X, dup.Topology[2].X);
Assert.AreEqual(original.Brep.Vertices[2].Location.Y, dup.Topology[2].Y);
Assert.AreEqual(original.Brep.Vertices[3].Location.X, dup.Topology[3].X);
Assert.AreEqual(original.Brep.Vertices[3].Location.Y, dup.Topology[3].Y);
Assert.AreEqual(original.Brep.Vertices[0].Location.X, dup.Topology[4].X);
Assert.AreEqual(original.Brep.Vertices[0].Location.Y, dup.Topology[4].Y);
Assert.AreEqual(1, dup.IncLinesTopology[0][0].X);
Assert.AreEqual(2, dup.IncLinesTopology[0][0].Y);
Assert.AreEqual(3, dup.IncLinesTopology[0][1].X);
Assert.AreEqual(2, dup.IncLinesTopology[0][1].Y);
Assert.AreEqual(1, dup.InclusionPoints[0].X);
Assert.AreEqual(1, dup.InclusionPoints[0].Y);
Assert.AreEqual(System.Drawing.Color.FromArgb(255, 0, 0, 255), dup.Member.Colour);
Assert.AreEqual(13, dup.ID);
Assert.AreEqual(1.56, dup.Member.MeshSize);
Assert.AreEqual("ehbaba", dup.Member.Name);
Assert.IsFalse(dup.Member.IsDummy);
Assert.AreEqual(0.33, dup.Member.Offset.X1);
Assert.AreEqual(1, dup.Member.Property);
Assert.AreEqual(3, dup.Property.ID);
Assert.AreEqual(AnalysisOrder.RIGID_DIAPHRAGM, dup.Member.Type2D);
Assert.AreEqual(MemberType.GENERIC_2D, dup.Member.Type);
// make some changes to original
// create a list of corner points
List <Point3d> pts2 = new List <Point3d>();
pts2.Add(new Point3d(0, 0, 0));
pts2.Add(new Point3d(5, 0, 0));
pts2.Add(new Point3d(7, 6, 0));
pts2.Add(new Point3d(2, 4, 0));
pts2.Add(pts2[0]); // add initial point to close curve
Polyline pol2 = new Polyline(pts2); // create edge-crv from pts
// create planar brep from polyline
Brep brep2 = Brep.CreatePlanarBreps(pol2.ToNurbsCurve(), 0.001)[0];
// set new brep
original.Brep = brep2;
// changes to class members
original.Colour = System.Drawing.Color.Black;
original.ID = 7;
original.Member.MeshSize = 0;
original.Member.Name = "Persepolis";
original.Member.IsDummy = true;
original.Member.Offset.X1 = 0.12;
original.Member.Property = 3;
original.Property.ID = 44;
original.Member.Type2D = AnalysisOrder.QUADRATIC;
original.Member.Type = MemberType.WALL;
// check that orignal are not equal to duplicate
Assert.AreNotEqual(original.Brep.Vertices[0].Location.X, dup.Topology[0].X);
Assert.AreNotEqual(original.Brep.Vertices[0].Location.Y, dup.Topology[0].Y);
Assert.AreNotEqual(original.Brep.Vertices[1].Location.X, dup.Topology[1].X);
Assert.AreNotEqual(original.Brep.Vertices[1].Location.Y, dup.Topology[1].Y);
Assert.AreNotEqual(original.Brep.Vertices[2].Location.X, dup.Topology[2].X);
Assert.AreNotEqual(original.Brep.Vertices[2].Location.Y, dup.Topology[2].Y);
Assert.AreNotEqual(original.Brep.Vertices[3].Location.X, dup.Topology[3].X);
Assert.AreNotEqual(original.Brep.Vertices[3].Location.Y, dup.Topology[3].Y);
Assert.AreNotEqual(original.Brep.Vertices[0].Location.X, dup.Topology[4].X);
Assert.AreNotEqual(original.Brep.Vertices[0].Location.Y, dup.Topology[4].Y);
// check that duplicate keeps it's member values
Assert.AreEqual(System.Drawing.Color.FromArgb(255, 0, 0, 255), dup.Member.Colour);
Assert.AreEqual(13, dup.ID);
Assert.AreEqual(1.56, dup.Member.MeshSize);
Assert.AreEqual("ehbaba", dup.Member.Name);
Assert.IsFalse(dup.Member.IsDummy);
Assert.AreEqual(0.33, dup.Member.Offset.X1);
Assert.AreEqual(1, dup.Member.Property);
Assert.AreEqual(3, dup.Property.ID);
Assert.AreEqual(AnalysisOrder.RIGID_DIAPHRAGM, dup.Member.Type2D);
Assert.AreEqual(MemberType.GENERIC_2D, dup.Member.Type);
// check that changes are made to original
Assert.AreEqual(System.Drawing.Color.FromArgb(255, 0, 0, 0), original.Member.Colour);
Assert.AreEqual(7, original.ID);
Assert.AreEqual(0, original.Member.MeshSize);
Assert.AreEqual("Persepolis", original.Member.Name);
Assert.IsTrue(original.Member.IsDummy);
Assert.AreEqual(0.12, original.Member.Offset.X1);
Assert.AreEqual(3, original.Member.Property);
Assert.AreEqual(44, original.Property.ID);
Assert.AreEqual(AnalysisOrder.QUADRATIC, original.Member.Type2D);
Assert.AreEqual(MemberType.WALL, original.Member.Type);
}
protected override void SolveInstance(IGH_DataAccess DA)
{
GsaMember2d gsaMember2d = new GsaMember2d();
if (DA.GetData(0, ref gsaMember2d))
{
GsaMember2d mem = gsaMember2d.Duplicate();
// #### inputs ####
// 1 brep
Brep brep = mem.Brep; //existing brep
GH_Brep ghbrep = new GH_Brep();
if (DA.GetData(1, ref ghbrep))
{
if (GH_Convert.ToBrep(ghbrep, ref brep, GH_Conversion.Both))
{
mem.Brep = brep;
}
}
// 2 section
GH_ObjectWrapper gh_typ = new GH_ObjectWrapper();
if (DA.GetData(2, ref gh_typ))
{
GsaProp2d prop2d = new GsaProp2d();
if (gh_typ.Value is GsaProp2d)
{
gh_typ.CastTo(ref prop2d);
}
else if (gh_typ.Value is GH_Number)
{
if (GH_Convert.ToInt32((GH_Number)gh_typ.Value, out int idd, GH_Conversion.Both))
{
prop2d.ID = idd;
}
}
mem.Property = prop2d;
}
// 3 offset
GsaOffset offset = new GsaOffset();
if (DA.GetData(3, ref offset))
{
mem.Member.Offset.Z = offset.Z;
}
// 4 inclusion points
List <Point3d> pts = mem.InclusionPoints;
List <GH_Point> ghpts = new List <GH_Point>();
if (DA.GetDataList(4, ghpts))
{
for (int i = 0; i < ghpts.Count; i++)
{
Point3d pt = new Point3d();
if (GH_Convert.ToPoint3d(ghpts[i], ref pt, GH_Conversion.Both))
{
pts.Add(pt);
}
}
}
// 5 inclusion lines
CurveList crvlist = new CurveList(mem.InclusionLines);
List <Curve> crvs = crvlist.ToList();
List <GH_Curve> ghcrvs = new List <GH_Curve>();
if (DA.GetDataList(5, ghcrvs))
{
for (int i = 0; i < ghcrvs.Count; i++)
{
Curve crv = null;
if (GH_Convert.ToCurve(ghcrvs[i], ref crv, GH_Conversion.Both))
{
crvs.Add(crv);
}
}
}
GsaMember2d tmpmem = new GsaMember2d(brep, crvs, pts)
{
ID = mem.ID,
Member = mem.Member,
Property = mem.Property
};
mem = tmpmem;
// 6 mesh size
GH_Number ghmsz = new GH_Number();
if (DA.GetData(6, ref ghmsz))
{
if (GH_Convert.ToDouble(ghmsz, out double msz, GH_Conversion.Both))
{
mem.Member.MeshSize = msz;
}
}
// 7 mesh with others
GH_Boolean ghbool = new GH_Boolean();
if (DA.GetData(7, ref ghbool))
{
if (GH_Convert.ToBoolean(ghbool, out bool mbool, GH_Conversion.Both))
{
//mem.member.MeshWithOthers
}
}
// 8 type
GH_Integer ghint = new GH_Integer();
if (DA.GetData(8, ref ghint))
{
if (GH_Convert.ToInt32(ghint, out int type, GH_Conversion.Both))
{
mem.Member.Type = Util.Gsa.GsaToModel.Member2dType(type);
}
}
// 9 element type / analysis order
GH_Integer ghinteg = new GH_Integer();
if (DA.GetData(9, ref ghinteg))
{
if (GH_Convert.ToInt32(ghinteg, out int type, GH_Conversion.Both))
{
mem.Member.Type2D = Util.Gsa.GsaToModel.Element2dType(type);
}
}
// 10 ID
GH_Integer ghID = new GH_Integer();
if (DA.GetData(10, ref ghID))
{
if (GH_Convert.ToInt32(ghID, out int id, GH_Conversion.Both))
{
mem.ID = id;
}
}
// 11 name
GH_String ghnm = new GH_String();
if (DA.GetData(11, ref ghnm))
{
if (GH_Convert.ToString(ghnm, out string name, GH_Conversion.Both))
{
mem.Member.Name = name;
}
}
// 12 Group
GH_Integer ghgrp = new GH_Integer();
if (DA.GetData(12, ref ghgrp))
{
if (GH_Convert.ToInt32(ghgrp, out int grp, GH_Conversion.Both))
{
mem.Member.Group = grp;
}
}
// 13 Colour
GH_Colour ghcol = new GH_Colour();
if (DA.GetData(13, ref ghcol))
{
if (GH_Convert.ToColor(ghcol, out System.Drawing.Color col, GH_Conversion.Both))
{
mem.Member.Colour = col;
}
}
// 14 Dummy
GH_Boolean ghdum = new GH_Boolean();
if (DA.GetData(14, ref ghdum))
{
if (GH_Convert.ToBoolean(ghdum, out bool dum, GH_Conversion.Both))
{
mem.Member.IsDummy = dum;
}
}
// #### outputs ####
DA.SetData(0, new GsaMember2dGoo(mem));
DA.SetData(1, mem.Brep);
DA.SetData(2, mem.Property);
GsaOffset gsaOffset = new GsaOffset
{
Z = mem.Member.Offset.Z
};
DA.SetData(3, gsaOffset);
DA.SetDataList(4, mem.InclusionPoints);
DA.SetDataList(5, mem.InclusionLines);
DA.SetData(6, mem.Member.MeshSize);
//DA.SetData(7, mem.member.MeshWithOthers);
DA.SetData(8, mem.Member.Type);
DA.SetData(9, mem.Member.Type2D);
DA.SetData(10, mem.ID);
DA.SetData(11, mem.Member.Name);
DA.SetData(12, mem.Member.Group);
DA.SetData(13, mem.Member.Colour);
DA.SetData(14, mem.Member.IsDummy);
}
}
protected override void SolveInstance(IGH_DataAccess DA)
{
GsaMember2d gsaMember2d = new GsaMember2d();
if (DA.GetData(0, ref gsaMember2d))
{
if (gsaMember2d == null)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Member2D input is null");
}
GsaMember2d mem = gsaMember2d.Duplicate();
// #### inputs ####
// 1 ID
GH_Integer ghID = new GH_Integer();
if (DA.GetData(1, ref ghID))
{
if (GH_Convert.ToInt32(ghID, out int id, GH_Conversion.Both))
{
mem.ID = id;
}
}
// 2/3/4 Brep, incl.pts and incl.lns
Brep brep = mem.Brep; //existing brep
GH_Brep ghbrep = new GH_Brep();
CurveList crvlist = new CurveList(mem.InclusionLines);
List <Curve> crvs = crvlist.ToList();
List <GH_Curve> ghcrvs = new List <GH_Curve>();
List <GH_Point> ghpts = new List <GH_Point>();
List <Point3d> pts = mem.InclusionPoints;
if ((DA.GetData(2, ref ghbrep)) || (DA.GetDataList(3, ghpts)) || (DA.GetDataList(4, ghcrvs)))
{
// 2 brep
if (DA.GetData(2, ref ghbrep))
{
if (GH_Convert.ToBrep(ghbrep, ref brep, GH_Conversion.Both))
{
mem.Brep = brep;
}
}
// 3 inclusion points
if (DA.GetDataList(3, ghpts))
{
for (int i = 0; i < ghpts.Count; i++)
{
Point3d pt = new Point3d();
if (GH_Convert.ToPoint3d(ghpts[i], ref pt, GH_Conversion.Both))
{
pts.Add(pt);
}
}
}
// 4 inclusion lines
if (DA.GetDataList(4, ghcrvs))
{
for (int i = 0; i < ghcrvs.Count; i++)
{
Curve crv = null;
if (GH_Convert.ToCurve(ghcrvs[i], ref crv, GH_Conversion.Both))
{
crvs.Add(crv);
}
}
}
GsaMember2d tmpmem = new GsaMember2d(brep, crvs, pts);
mem.PolyCurve = tmpmem.PolyCurve;
mem.Topology = tmpmem.Topology;
mem.TopologyType = tmpmem.TopologyType;
mem.VoidTopology = tmpmem.VoidTopology;
mem.VoidTopologyType = tmpmem.VoidTopologyType;
mem.InclusionLines = tmpmem.InclusionLines;
mem.IncLinesTopology = tmpmem.IncLinesTopology;
mem.IncLinesTopologyType = tmpmem.IncLinesTopologyType;
mem.InclusionPoints = tmpmem.InclusionPoints;
mem = tmpmem;
}
// 5 section
GH_ObjectWrapper gh_typ = new GH_ObjectWrapper();
if (DA.GetData(5, ref gh_typ))
{
GsaProp2d prop2d = new GsaProp2d();
if (gh_typ.Value is GsaProp2dGoo)
{
gh_typ.CastTo(ref prop2d);
mem.Property = prop2d;
mem.Member.Property = 0;
}
else
{
if (GH_Convert.ToInt32(gh_typ.Value, out int idd, GH_Conversion.Both))
{
mem.Member.Property = idd;
mem.Property = null;
}
else
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Unable to convert PA input to a 2D Property of reference integer");
return;
}
}
}
/// <summary>
/// Method to import 1D and 2D Members from a GSA model.
/// Will output a tuple of GhSA GsaMember1d and GsaMember2d.
/// Filter members to import using memList input;
/// "all" or empty string ("") will import all elements. Default is "all"
/// "propGraft" bool = true; will put members in Grasshopper branch corrosponding to its property
/// </summary>
/// <param name="model"></param>
/// <param name="memList"></param>
/// <param name="propGraft"></param>
/// <returns></returns>
public static Tuple <DataTree <GsaMember1dGoo>, DataTree <GsaMember2dGoo> > GsaGetMemb(Model model, string memList = "all", bool propGraft = true)
{
// Create dictionaries to read list of elements and nodes:
IReadOnlyDictionary <int, Member> mDict;
mDict = model.Members(memList);
IReadOnlyDictionary <int, Node> nDict;
nDict = model.Nodes("all");
IReadOnlyDictionary <int, Section> sDict;
sDict = model.Sections();
IReadOnlyDictionary <int, Prop2D> pDict;
pDict = model.Prop2Ds();
// Create lists for Rhino lines and meshes
DataTree <GsaMember1dGoo> mem1ds = new DataTree <GsaMember1dGoo>();
DataTree <GsaMember2dGoo> mem2ds = new DataTree <GsaMember2dGoo>();
if (!propGraft)
{
mem1ds.EnsurePath(0);
mem2ds.EnsurePath(0);
int max = mDict.Count;
if (max > 0)
{
for (int i = 0; i < mDict.Keys.ElementAt(max - 1); i++)
{
mem1ds.Branches[0].Add(null);
mem2ds.Branches[0].Add(null);
}
}
}
// Loop through all members in Member dictionary
foreach (var key in mDict.Keys)
{
if (mDict.TryGetValue(key, out Member mem))
{
int prop = 0;
if (propGraft)
{
prop = mem.Property - 1;
}
// Build topology lists
string toporg = mem.Topology; //original topology list
Tuple <Tuple <List <int>, List <string> >, Tuple <List <List <int> >, List <List <string> > >,
Tuple <List <List <int> >, List <List <string> > >, List <int> > topologyTuple = Topology_detangler(toporg);
Tuple <List <int>, List <string> > topoTuple = topologyTuple.Item1;
Tuple <List <List <int> >, List <List <string> > > voidTuple = topologyTuple.Item2;
Tuple <List <List <int> >, List <List <string> > > lineTuple = topologyTuple.Item3;
List <int> topo_int = topoTuple.Item1;
List <string> topoType = topoTuple.Item2; //list of polyline curve type (arch or line) for member1d/2d
List <List <int> > void_topo_int = voidTuple.Item1;
List <List <string> > void_topoType = voidTuple.Item2; //list of polyline curve type (arch or line) for void /member2d
List <List <int> > incLines_topo_int = lineTuple.Item1;
List <List <string> > inclLines_topoType = lineTuple.Item2; //list of polyline curve type (arch or line) for inclusion /member2d
List <int> inclpts = topologyTuple.Item4;
// replace topology integers with actual points
List <Point3d> topopts = new List <Point3d>(); // list of topology points for visualisation /member1d/member2d
for (int i = 0; i < topo_int.Count; i++)
{
if (nDict.TryGetValue(topo_int[i], out Node node))
{
var p = node.Position;
topopts.Add(new Point3d(p.X, p.Y, p.Z));
}
node.Dispose();
}
//list of lists of void points /member2d
List <List <Point3d> > void_topo = new List <List <Point3d> >();
for (int i = 0; i < void_topo_int.Count; i++)
{
void_topo.Add(new List <Point3d>());
for (int j = 0; j < void_topo_int[i].Count; j++)
{
if (nDict.TryGetValue(void_topo_int[i][j], out Node node))
{
var p = node.Position;
void_topo[i].Add(new Point3d(p.X, p.Y, p.Z));
}
node.Dispose();
}
}
//list of lists of line inclusion topology points /member2d
List <List <Point3d> > incLines_topo = new List <List <Point3d> >();
for (int i = 0; i < incLines_topo_int.Count; i++)
{
incLines_topo.Add(new List <Point3d>());
for (int j = 0; j < incLines_topo_int[i].Count; j++)
{
if (nDict.TryGetValue(incLines_topo_int[i][j], out Node node))
{
var p = node.Position;
incLines_topo[i].Add(new Point3d(p.X, p.Y, p.Z));
}
node.Dispose();
}
}
//list of points for inclusion /member2d
List <Point3d> incl_pts = new List <Point3d>();
for (int i = 0; i < inclpts.Count; i++)
{
if (nDict.TryGetValue(inclpts[i], out Node node))
{
var p = node.Position;
incl_pts.Add(new Point3d(p.X, p.Y, p.Z));
}
node.Dispose();
}
if (mem.Type == MemberType.GENERIC_1D | mem.Type == MemberType.BEAM | mem.Type == MemberType.CANTILEVER |
mem.Type == MemberType.COLUMN | mem.Type == MemberType.COMPOS | mem.Type == MemberType.PILE)
{
GsaMember1d mem1d = new GsaMember1d(topopts, topoType)
{
ID = key,
Member = mem
};
GsaSection section = new GsaSection
{
ID = mem.Property
};
if (sDict.TryGetValue(section.ID, out Section tempSection))
{
section.Section = tempSection;
}
mem1d.Section = section;
mem1ds.EnsurePath(prop);
GH_Path path = new GH_Path(prop);
if (propGraft)
{
mem1ds.Add(new GsaMember1dGoo(mem1d.Duplicate()), path);
}
else
{
mem1ds[path, key - 1] = new GsaMember1dGoo(mem1d.Duplicate());
}
}
else
{
GsaMember2d mem2d = new GsaMember2d(topopts, topoType, void_topo, void_topoType, incLines_topo, inclLines_topoType, incl_pts)
{
Member = mem,
ID = key
};
GsaProp2d prop2d = new GsaProp2d
{
ID = mem.Property
};
if (pDict.TryGetValue(prop2d.ID, out Prop2D tempProp))
{
prop2d.Prop2d = tempProp;
}
mem2d.Property = prop2d;
mem2ds.EnsurePath(prop);
GH_Path path = new GH_Path(prop);
if (propGraft)
{
mem2ds.Add(new GsaMember2dGoo(mem2d.Duplicate()), path);
}
else
{
mem2ds[path, key - 1] = new GsaMember2dGoo(mem2d.Duplicate());
}
}
topopts.Clear();
topoType.Clear();
void_topo.Clear();
void_topoType.Clear();
incLines_topo.Clear();
inclLines_topoType.Clear();
incl_pts.Clear();
}
}
return(new Tuple <DataTree <GsaMember1dGoo>, DataTree <GsaMember2dGoo> >(mem1ds, mem2ds));
}
protected override void SolveInstance(IGH_DataAccess DA)
{
#region inputs
// Get Member1d input
GH_ObjectWrapper gh_typ = new GH_ObjectWrapper();
List <GH_ObjectWrapper> gh_types = new List <GH_ObjectWrapper>();
List <GsaNode> in_nodes = new List <GsaNode>();
if (DA.GetDataList(0, gh_types))
{
for (int i = 0; i < gh_types.Count; i++)
{
gh_typ = gh_types[i];
if (gh_typ.Value is GsaNodeGoo)
{
GsaNode gsanode = new GsaNode();
gh_typ.CastTo(ref gsanode);
in_nodes.Add(gsanode);
}
else
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Error in Node input");
return;
}
}
}
List <GsaMember1d> in_mem1ds = new List <GsaMember1d>();
if (DA.GetDataList(1, gh_types))
{
for (int i = 0; i < gh_types.Count; i++)
{
gh_typ = gh_types[i];
if (gh_typ.Value is GsaMember1dGoo)
{
GsaMember1d gsamem1 = new GsaMember1d();
gh_typ.CastTo(ref gsamem1);
in_mem1ds.Add(gsamem1);
}
else
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Error in Mem1D input");
return;
}
}
}
// Get Member2d input
gh_types = new List <GH_ObjectWrapper>();
List <GsaMember2d> in_mem2ds = new List <GsaMember2d>();
if (DA.GetDataList(2, gh_types))
{
for (int i = 0; i < gh_types.Count; i++)
{
gh_typ = gh_types[i];
if (gh_typ.Value is GsaMember2dGoo)
{
GsaMember2d gsamem2 = new GsaMember2d();
gh_typ.CastTo(ref gsamem2);
in_mem2ds.Add(gsamem2);
}
else
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Error in Mem2D input");
return;
}
}
}
// Get Member3d input
gh_types = new List <GH_ObjectWrapper>();
List <GsaMember3d> in_mem3ds = new List <GsaMember3d>();
if (DA.GetDataList(3, gh_types))
{
for (int i = 0; i < gh_types.Count; i++)
{
gh_typ = gh_types[i];
if (gh_typ.Value is GsaMember3dGoo)
{
GsaMember3d gsamem3 = new GsaMember3d();
gh_typ.CastTo(ref gsamem3);
in_mem3ds.Add(gsamem3);
}
else
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Error in Mem3D input");
return;
}
}
}
// manually add a warning if no input is set, as all three inputs are optional
if (in_mem1ds.Count < 1 & in_mem2ds.Count < 1 & in_mem3ds.Count < 1)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Input parameters failed to collect data");
}
#endregion
// Assemble model
Model gsa = Util.Gsa.ToGSA.Assemble.AssembleModel(null, in_nodes, null, null, null, in_mem1ds, in_mem2ds, in_mem3ds, null, null, null, null);
#region meshing
// Create elements from members
gsa.CreateElementsFromMembers();
#endregion
// extract nodes from model
List <GsaNodeGoo> nodes = Util.Gsa.FromGSA.GetNodes(gsa.Nodes(), gsa);
// extract elements from model
Tuple <List <GsaElement1dGoo>, List <GsaElement2dGoo>, List <GsaElement3dGoo> > elementTuple
= Util.Gsa.FromGSA.GetElements(gsa.Elements(), gsa.Nodes(), gsa.Sections(), gsa.Prop2Ds());
// expose internal model if anyone wants to use it
GsaModel outModel = new GsaModel();
outModel.Model = gsa;
DA.SetDataList(0, nodes);
DA.SetDataList(1, elementTuple.Item1);
DA.SetDataList(2, elementTuple.Item2);
DA.SetDataList(3, elementTuple.Item3);
DA.SetData(4, new GsaModelGoo(outModel));
// custom display settings for element2d mesh
element2ds = elementTuple.Item2;
}
