/// <summary>
/// 確定
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
if (_CSTMMSIqcInfoData == null)
{
// [00060]{0}沒有資料可顯示！
throw new Exception(TextMessage.Error.T00060(""));
}
if (ttbNewQuantity.Text.IsNullOrTrimEmpty())
{
// [00060]{0}沒有資料可顯示！
throw new Exception(TextMessage.Error.T00060(lblNewQuantity.Text));
}
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
var CSTMMSIqcInfoLogData = _CSTMMSIqcInfoData.Fill <CSTMMSIqcInfoLog>();
CSTMMSIqcInfoLogData.InsertToDB(txnStamp.UserID, txnStamp.RecordTime);
_CSTMMSIqcInfoData.Quantity = ttbNewQuantity.Text.ToDecimal();
_CSTMMSIqcInfoData.UpdateToDB();
cts.Complete();
}
ClearField();
AjaxFocus(ttbIQCRunID);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
protected void gvToolList_RowDeleting(object sender, GridViewDeleteEventArgs e)
{
try
{
CurrentToolData = AllTools[gvToolList.Rows[e.RowIndex].DataItemIndex];
if (CurrentToolData.ActiveFlag == "T") //ActiveFlag的判斷,若曾經啟用過則不可刪除
{
throw new Exception(TextMessage.Error.T00714());
}
using (CimesTransactionScope cts = CimesTransactionScope.Create())
{
CurrentToolData.DeleteFromDB();
AttributeAttributeInfo.DeleteByObjectSIDAndDataClass(CurrentToolData.ID, "ToolAttribute", this.User.Identity.Name, DBCenter.GetSystemTime());
LogCenter.LogToDB(CurrentToolData, LogCenter.LogIndicator.Create(ActionType.Remove, User.Identity.Name, DBCenter.GetSystemTime()));
cts.Complete();
}
CurrentToolData = null;
gvToolList.ResetCloneDataSource();
QueryAllTool();
//BindGridView();
}
catch (Exception ex)
{
HandleError(ex);
}
}
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
if (_ProcessLot == null)
{
throw new RuleCimesException(TextMessage.Error.T00826(lblBoxNo.Text));
}
// 定義交易戳記
var txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
// 將轉為子單元的批號還原，例如可使用於拆包
WIPTxn.Default.ConvertToLot(_ProcessLot, _ComponentList, txnStamp);
cts.Complete();
}
// 返回定義的預設網頁
ReturnToPortal();
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 確認
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
//確認模具是否有輸入
ttbToolName.Must(lblToolName);
using (var cts = CimesTransactionScope.Create())
{
//變更模具上的儲位為Warehouse
TMSTransaction.ModifyToolSystemAttribute(_ToolData, "Location", "Warehouse", txnStamp);
cts.Complete();
}
ClearField();
AjaxFocus(ttbToolName);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 刪除檢驗資料
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void gvToolReport_RowDeleting(object sender, GridViewDeleteEventArgs e)
{
try
{
int index = gvToolReport.Rows[e.RowIndex].DataItemIndex;
var removeData = _ToolReports[index];
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
removeData.DeleteFromDB();
LogCenter.LogToDB(removeData, LogCenter.LogIndicator.Create(ActionType.Remove, txnStamp.UserID, txnStamp.RecordTime));
cts.Complete();
}
//重新取得資料
GetToolReport(_CurrentToolName);
}
catch (Exception ex)
{
HandleError(ex);
}
}
protected void gvQuery_RowDeleting(object sender, GridViewDeleteEventArgs e)
{
try
{
int iIndex = gvQuery.Rows[e.RowIndex].DataItemIndex;
//避免新增未按下儲存就按其他資料的編輯
string SID, Tag;
if (ToolTypeList[iIndex].ActiveFlag == "T") //ActiveFlag的判斷,若曾經啟用過則不可刪除
{
removeListAddandDeletRow();
gvQuery.SetDataSource(ToolTypeList);
gvQuery.DataBind();
throw new Exception(TextMessage.Error.T00714());
}
else
{
// Delete Data
SID = ToolTypeList[iIndex].ID;
//避免若新增模式時,按下刪除的button,不作動作
if (SID.Length == 0)
{
return;
}
using (CimesTransactionScope cts = CimesTransactionScope.Create())
{
if (ToolTypeList[iIndex].DeleteFromDB() == 0)
{
throw new Exception(TextMessage.Error.T00710(""));
}
AttributeAttributeInfo.DeleteByObjectSIDAndDataClass(SID, "ToolTypeAttribute", this.User.Identity.Name, DBCenter.GetSystemTime());
cts.Complete();
}
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00349(ToolTypeList[iIndex].Type));
ToolTypeList.RemoveAt(iIndex);
removeListAddandDeletRow();
gvQuery.SetDataSource(ToolTypeList);
gvQuery.EditItemIndex = -1;
if (gvQuery.CurrentPageIndex > ((ToolTypeList.Count - 1) / gvQuery.PageSize))
{
gvQuery.CurrentPageIndex = (ToolTypeList.Count - 1) / gvQuery.PageSize;
}
gvQuery.DataBind();
DisableSubControl();
uscAttributeSetupGrid.ClearField();
}
}
catch (Exception ex)
{
HandleError(ex, CurrentUpdatePanel, string.Empty, MessageShowOptions.OnLabel);
}
}
private void InsertToolType(int rowIndex)
{
int index = gvQuery.Rows[rowIndex].DataItemIndex;
ArrayList SaveList = new ArrayList();
string sToolType = ((TextBox)gvQuery.Rows[rowIndex].FindControl("ttbType")).Text;
RadioButton rbtEnable = (RadioButton)gvQuery.Rows[rowIndex].FindControl("rbEnable");
TextBox ttbDescr = (TextBox)gvQuery.Rows[rowIndex].FindControl("ttbDescription");
//檢查是否有相同名稱存在的資料
sql = "SELECT 1 FROM MES_TOOL_TYPE WHERE TYPE = #[STRING]";
DataView dvCheck = DBCenter.GetDataTable(sql, sToolType).DefaultView;// Query.DoQuery(sql);
if (dvCheck != null && dvCheck.Count > 0)
{
throw new Exception(TextMessage.Error.T00710(sToolType));
}
uscAttributeSetupGrid.ValidateCheck();
//新增資料庫
ToolTypeInfo toolTypeData = InfoCenter.Create <ToolTypeInfo>();
toolTypeData.Type = sToolType;
toolTypeData.Description = ttbDescr.Text;
toolTypeData["TOOLCLASS"] = "CUTTER";
toolTypeData["UPDATETIME"] = DBCenter.GetSystemTime();
toolTypeData["USERID"] = this.User.Identity.Name;
if (rbtEnable.Checked == true)
{
toolTypeData.Status = "Enable";
toolTypeData.ActiveFlag = "T";
}
else
{
toolTypeData.Status = "Disable";
toolTypeData.ActiveFlag = "F";
}
//儲存系統屬性
_SystemAttribute.SaveSystemAttribute(toolTypeData);
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, this.ApplicationName);
using (CimesTransactionScope cts = CimesTransactionScope.Create())
{
toolTypeData.InsertToDB();
uscAttributeSetupGrid.ExcuteTransaction(toolTypeData.ID);
//儲存刀壽
SaveToolLife(sToolType, txnStamp.UserID, txnStamp.RecordTime);
//儲存刀具圖檔
SaveToolPicture(sToolType, txnStamp.UserID, txnStamp.RecordTime);
cts.Complete();
}
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00695(sToolType));
ToolTypeList[index] = toolTypeData;
}
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
EquipmentInfo equipmentData = EquipmentInfo.GetEquipmentByName(mEQP.EquipmentName);
if (mEQP.Tag != equipmentData.Tag)
{
throw new RuleCimesException(TextMessage.Error.T00747(""));
}
string EqpID = ciEquipment.Must(lblEquipment);
string Reason = csReason.Must(lblReasonCode).Value;
EquipmentStateInfo equipmentState = EquipmentStateInfo.GetEquipmentStateByState(ddlNewState.Must(lblNewState).Text);
var txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, this.ApplicationName);
var rcData = csReason.GetBusinessReason().CategoryReason;
txnStamp.CategoryReasonCode = rcData;
txnStamp.Description = ttbDesc.Text.Trim();
#region 檢查是否有設定機台變更狀態警報，若有，則發送警報
//使用Function取得ALM設定，可彈性使用
//取得機台狀態警報設定，預設是抓取系統資料設定[EquipStateAlarm]
AlarmTypeInfo AlarmType = RuleExtendManager.GetEquipmentChangeStateAlarm(equipmentData, ddlNewState.Must(lblNewState).Text);
string ALMsg = @"[Subject:{0}][Content:{1}:{2}; {3}:{4}; {5}:{6}; {7}:{8}; {9}:{10}]";
if (AlarmType != null)
{
// "[Content:TEST][Subject:TEST]"
ALMsg = string.Format(ALMsg, ProgramInformationBlock1.Caption, lblEquipment.Text, mEQP.EquipmentName, lblOldState.Text, mEQP.CurrentState, lblNewState.Text, equipmentState.State, lblReasonCode.Text, rcData.Reason, lblDescription.Text, txnStamp.Description);
}
#endregion
using (var cts = CimesTransactionScope.Create())
{
EMSTransaction.ChangeState(equipmentData, equipmentState, txnStamp);
RuleExtendManager.EquipmentTxnEnd(equipmentData);
cts.Complete();
}
#region 發送警報
if (AlarmType != null)
{
AlarmService WebServiceALM = new AlarmService();
string url = "http://" + Request.Url.Host + Request.ApplicationPath + "/ALM/Services/AlarmService.asmx";
WebServiceALM.Url = url;
string ReturnMsg = WebServiceALM.LaunchAlarm(AlarmType.GroupRights, AlarmType.TYPE, ALMsg, txnStamp.RecordTime, "UI", User.Identity.Name);
}
#endregion
Response.Redirect(ciMes.Security.UserSetting.GetPreviousListPage(this), false);
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 確認
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
//確認是否輸入刀具零組件
ttbToolName.Must(lblToolName);
//確認是否選擇報廢原因
ddlReason.Must(lblReason);
using (var cts = CimesTransactionScope.Create())
{
var newStateInfo = ToolStateInfo.GetToolStateByState("SCRAP");
if (newStateInfo == null)
{
//刀具零組件狀態: {0}不存在，請至配件狀態維護新增此狀態!!
throw new Exception(RuleMessage.Error.C10149("SCRAP"));
}
//因刀具報表需求，所以在報廢時要將使用次數記錄在UDC07
var toolLifeList = CSTToolLifeInfo.GetToolLifeByToolNmae(_ToolData.ToolName);
var toolLifeData = toolLifeList.Find(p => p.Head == _ToolData.Head);
TMSTransaction.ModifyToolSystemAttribute(_ToolData, "USERDEFINECOL07", toolLifeData.UseCount.ToCimesString(), txnStamp);
//變更刀具 GROUPID
TMSTransaction.ModifyToolSystemAttribute(_ToolData, "GROUPID", "", txnStamp);
//變更IDENTITY為報廢品
TMSTransaction.ModifyToolSystemAttribute(_ToolData, "IDENTITY", "報廢品", txnStamp);
//變更狀態為SCRAP
TMSTransaction.ChangeToolState(_ToolData, newStateInfo, txnStamp);
//註記原因碼
var reasonCategory = InfoCenter.GetBySID <ReasonCategoryInfo>(ddlReason.SelectedValue);
txnStamp.CategoryReasonCode = reasonCategory;
txnStamp.Description = "";
//備註
TMSTransaction.AddToolComment(_ToolData, txnStamp);
cts.Complete();
}
ClearField();
AjaxFocus(ttbToolName);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
protected void btnTempSave_Click(object sender, EventArgs e)
{
try
{
if (_DeviceName.IsNullOrEmpty())
{
throw new RuleCimesException(TextMessage.Error.T00826(lblDeviceName.Text));
}
if (_PackingList.Count == 0 && _RelativePackingList.Count == 0)
{
throw new RuleCimesException(TextMessage.Error.T00826(lblWorkpiece.Text));
}
var txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
//刪除舊的資料
if (!_BatchID.IsNullOrEmpty())
{
DBCenter.ExecuteParse("DELETE CST_WIP_PACK_TEMP WHERE BATCHID = #[STRING]", _BatchID);
}
//產生新的批次ID
_BatchID = DBCenter.GetSystemID();
_PackingList.ForEach(p =>
{
var tempInfo = InfoCenter.Create <CSTWIPPackTempInfo>();
tempInfo.DeviceName = _DeviceName;
tempInfo.ComponentID = p.ComponentID;
tempInfo.SIDE = "L";
tempInfo.BatchID = _BatchID;
tempInfo.InsertToDB(txnStamp.UserID, txnStamp.RecordTime);
});
_RelativePackingList.ForEach(p =>
{
var tempInfo = InfoCenter.Create <CSTWIPPackTempInfo>();
tempInfo.DeviceName = _RelativeDeviceName;
tempInfo.ComponentID = p.ComponentID;
tempInfo.SIDE = "R";
tempInfo.BatchID = _BatchID;
tempInfo.InsertToDB(txnStamp.UserID, txnStamp.RecordTime);
});
//工時
_UserWorkTimeList.ForEach(p => {
p.InsertToDB(txnStamp.UserID, txnStamp.RecordTime);
});
_UserWorkTimeList.Clear();
cts.Complete();
}
ProgramInformationBlock1.ShowMessage(TextMessage.Hint.T00057(GetUIResource("TempSave")));
}
catch (Exception ex)
{
HandleError(ex);
}
}
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
var reasonCategory = ReasonCategoryInfo.GetReasonCategoryByCategoryNameAndReason("CustomizeReason", "ManualMerge");
if (reasonCategory == null)
{
//[00030]{0}：{1}不存在!
throw new CimesException(TextMessage.Error.T00030(GetUIResource("ReasonCode"), "CustomizeReason- ManualMerge"));
}
var baseLot = _LotDatas.Find(p => p.Status == "WaitMerge");
// 定義交易戳記
var txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
//拆批
var split = SplitLotInfo.CreateSplitLotByLotAndQuantity(baseLot.Lot, baseLot.WorkOrderLot, 0, 0, reasonCategory, "");
var splitIndicator = WIPTxn.SplitIndicator.Create();
WIPTxn.Default.SplitLot(baseLot, split, splitIndicator, txnStamp);
//再取一次批號資訊
var newLot = LotInfo.GetLotByLot(split.Lot);
//併批與子單元
List <MergeLotInfo> mergeLotList = new List <MergeLotInfo>();
_LotDatas.ForEach(mergelot =>
{
var lstCompData = mergelot.GetLotAllComponents();
var mergeLot = MergeLotInfo.GetMergeLotByLotAndQuantity(mergelot.Lot, lstCompData, reasonCategory, "");
mergeLotList.Add(mergeLot);
});
WIPTransaction.MergeLot(newLot, mergeLotList, txnStamp);
//再取一次批號資訊
var newMergeLot = LotInfo.GetLotByLot(split.Lot);
//將批號狀態變更為wait
WIPTransaction.ModifyLotSystemAttribute(newMergeLot, "STATUS", LotDefaultStatus.Wait.ToCimesString(), txnStamp);
//將COMPLOT、PROCESS_EQUIP欄位清空，因為這個時間點這個欄位已經沒意義了
WIPTransaction.ModifyLotSystemAttribute(newMergeLot, "COMPLOT", string.Empty, txnStamp);
WIPTransaction.ModifyLotSystemAttribute(newMergeLot, "PROCESS_EQUIP", string.Empty, txnStamp);
//Dispatch到下一站
WIPTransaction.DispatchLot(newMergeLot, txnStamp);
cts.Complete();
}
ClearField();
ttbWorkOrderLot.Text = "";
AjaxFocus(ttbWorkOrderLot);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
protected void btnCopy_Click(object sender, EventArgs e)
{
try
{
//取得登入者資訊
var recordTime = DBCenter.GetSystemTime();
var userID = User.Identity.Name;
//確認目標料號及機台編號是否已經存在資料
var toolDevices = CSTToolDeviceInfo.GetDataListByDeviceAndEquipmantName(ddlDevice.SelectedItem.Value, ddlEquipment.SelectedItem.Value);
if (toolDevices.Count > 0)
{
//料號({0})及機台({1}) 資料已存在，不可執行複製動作!
throw new Exception(RuleMessage.Error.C10117(ddlDevice.SelectedItem.Value, ddlEquipment.SelectedItem.Value));
}
using (var cts = CimesTransactionScope.Create())
{
//新增一筆CST_TOOL_DEVICE資料
var toolDevice = InfoCenter.Create <CSTToolDeviceInfo>();
toolDevice.DeviceName = ddlDevice.SelectedItem.Value;
toolDevice.EquipmentName = ddlEquipment.SelectedItem.Value;
toolDevice.Tag = 1;
toolDevice.InsertToDB(userID, recordTime);
LogCenter.LogToDB(toolDevice, LogCenter.LogIndicator.Create(ActionType.Add, userID, recordTime));
//複製CST_TOOL_DEVICE_DETAIL資料
_ToolDeviceDetails.ForEach(toolDeviceDetail =>
{
var newToolDeviceDetail = InfoCenter.Create <CSTToolDeviceDetailInfo>();
newToolDeviceDetail.EquipmentName = toolDevice.EquipmentName;
newToolDeviceDetail.Quantity = toolDeviceDetail.Quantity;
newToolDeviceDetail.DeviceName = toolDevice.DeviceName;
newToolDeviceDetail.ToolType = toolDeviceDetail.ToolType;
newToolDeviceDetail.ToolDeviceSID = toolDevice.ToolDeviceSID;
newToolDeviceDetail.InsertToDB();
LogCenter.LogToDB(newToolDeviceDetail, LogCenter.LogIndicator.Create(ActionType.Add, userID, recordTime));
});
cts.Complete();
}
//INF-00002:{0}儲存成功！
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00083(""), MessageShowOptions.OnLabel);
LoadControlDefault();
}
catch (Exception E)
{
HandleError(E);
}
}
/// <summary>
/// 確定
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
//檢查機台/序號是否有輸入
ttbEquipOrCompLot.Must(lblEquipOrCompLot);
using (var cts = CimesTransactionScope.Create())
{
string equipmentState = "Wait" + _QCType;
#region 更新機台狀態為WaitFAI
//只有FAI需要變更機台狀態，如果QCType參數為PPK或PQC，則不需更新機台狀態
if (_QCType.Equals(CustomizeFunction.QCType.FAI.ToCimesString()))
{
//取得機台狀態資料
var newStateInfo = EquipmentStateInfo.GetEquipmentStateByState(equipmentState);
if (newStateInfo == null)
{
//C00028 無機台狀態{0}的設定資料!
throw new CimesException(RuleMessage.Error.C00028(equipmentState));
}
//更新機台狀態
EMSTransaction.ChangeState(_EquipData, newStateInfo, txnStamp);
}
#endregion
#region 更新單號狀態為WaitFAI/WaitPPK
foreach (DataRow dr in _QCTable.Rows)
{
var qcInspectionData = InfoCenter.GetBySID <QCInspectionInfo>(dr["QCINSPSID"].ToString()).ChangeTo <QCInspectionInfoEx>();
qcInspectionData.Status = equipmentState;
qcInspectionData.ReceiveTime = txnStamp.RecordTime;
qcInspectionData.ReceiveUser = txnStamp.UserID;
qcInspectionData.UpdateToDB(txnStamp.UserID, txnStamp.RecordTime);
}
#endregion
cts.Complete();
}
ClearField();
AjaxFocus(ttbEquipOrCompLot);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 確定
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
//檢查機台是否有輸入
ttbEquipOrCompLot.Must(lblEquipOrCompLot);
//確認是否有勾選資料
if (SelectedData() == false)
{
// [00816]請至少選取一個{0}！
throw new Exception(TextMessage.Error.T00816(GetUIResource("SN")));
}
using (var cts = CimesTransactionScope.Create())
{
#region 更新單號狀態為PPK
for (int i = 0; i < gvQC.Rows.Count; i++)
{
var thisCheckBox = (CheckBox)gvQC.Rows[i].FindControl("ckbSelect");
//只有勾選的資料才要更新單號狀態
if (thisCheckBox.Checked)
{
DataRow dr = _QCTable.Rows[i];
var qcInspectionData = InfoCenter.GetBySID <QCInspectionInfo>(dr["QCINSPSID"].ToString()).ChangeTo <QCInspectionInfoEx>();
qcInspectionData.Status = _QCType;
qcInspectionData.StartTime = DBCenter.GetSystemTime();
qcInspectionData.StartUser = txnStamp.UserID;
qcInspectionData.UpdateToDB(txnStamp.UserID, txnStamp.RecordTime);
}
}
#endregion
cts.Complete();
}
ClearField();
AjaxFocus(ttbEquipOrCompLot);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 退回
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnReject_Click(object sender, EventArgs e)
{
try
{
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
//檢查機台/序號是否有輸入
ttbEquipOrCompLot.Must(lblEquipOrCompLot);
string status = "ToBeSent" + _QCType;
using (var cts = CimesTransactionScope.Create())
{
#region 更新單號狀態為ToBeSentFAI及設置PASSFLAG = N
foreach (DataRow dr in _QCTable.Rows)
{
var qcInspectionData = InfoCenter.GetBySID <QCInspectionInfo>(dr["QCINSPSID"].ToString()).ChangeTo <QCInspectionInfoEx>();
qcInspectionData.Status = status;
qcInspectionData.PassFlag = "N";
qcInspectionData.QCRejectTime = txnStamp.RecordTime;
qcInspectionData.QCRejectUser = txnStamp.UserID;
qcInspectionData.UpdateToDB(txnStamp.UserID, txnStamp.RecordTime);
}
#endregion
#region 更新機台狀態
//取得機台狀態資料
var newStateInfo = EquipmentStateInfo.GetEquipmentStateByState(status);
if (newStateInfo == null)
{
//C00028 無機台狀態{0}的設定資料!
throw new CimesException(RuleMessage.Error.C00028(status));
}
//更新機台狀態
EMSTransaction.ChangeState(_EquipData, newStateInfo, txnStamp);
#endregion
cts.Complete();
}
ClearField();
AjaxFocus(ttbEquipOrCompLot);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
if (_ProcessLot == null)
{
throw new RuleCimesException(TextMessage.Error.T00826(lblUnPackingInventoryLot.Text));
}
// 定義交易戳記
var txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
// 將入庫批取消完工
WIPTransaction.UndoFinish(_ProcessLot, txnStamp);
var unPackingLot = LotInfo.GetLotByLot(ttbBoxNo.Text.Trim());
// 取得拆包Component
var lstUnPackingComp = unPackingLot.GetLotAllComponents();
// 將轉為子單元的批號還原，例如可使用於拆包
var txn = WIPTxn.Default.ConvertToLot(unPackingLot, lstUnPackingComp, txnStamp);
txn.LotList.ForEach(lot => {
//寫入WMSMaster & Detail
var wmsMaster = CSTWMSMastInfo.GetMaterialLotDataByMaterialLot(lot["INVLOT"].ToString());
if (wmsMaster == null)
{
wmsMaster = InfoCenter.Create <CSTWMSMastInfo>();
wmsMaster.Lot = lot["INVLOT"].ToString();
wmsMaster.DeviceName = lot.DeviceName;
wmsMaster.RuleName = txnStamp.RuleName;
wmsMaster.InsertToDB(txnStamp.UserID, txnStamp.RecordTime);
}
//理論上只會有一個Comp
lot.GetLotAllComponents().ForEach(comp => {
var wmsDetail = InfoCenter.Create <CSTWMSDetailInfo>();
wmsDetail.Lot = lot["INVLOT"].ToString();
wmsDetail.ComponentID = comp.ComponentID;
wmsDetail.Quantity = comp.ComponentQuantity;
wmsDetail.InsertToDB(txnStamp.UserID, txnStamp.RecordTime);
});
WIPTransaction.TerminateLot(lot, txnStamp);
});
cts.Complete();
}
// 返回定義的預設網頁
ReturnToPortal();
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 確認
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
//確認是否輸入刀具零組件
ttbToolName.Must(lblToolName);
//確認是否有選擇變更回廠日
var date = ttbDate.MustDate(lblDate);
//取得系統時間
var sysDate = Convert.ToDateTime(DBCenter.GetSystemDateTime().ToString("yyyy/MM/dd"));
//確認預定回廠日是否大於等於當天日期
if (date < sysDate)
{
//變更回廠日必須大於等於{0} !
throw new Exception(RuleMessage.Error.C10170(sysDate.ToString("yyyy/MM/dd")));
}
using (var cts = CimesTransactionScope.Create())
{
#region 更新[CST_TOOL_REPAIR]的預計回廠日
_ToolRepairData.EstimateDateOfReturn = ttbDate.Text;
_ToolRepairData.UpdateToDB(txnStamp.UserID, txnStamp.RecordTime);
//新增一筆[CST_TOOL_REPAIR_LOG]
LogCenter.LogToDB(_ToolRepairData, LogCenter.LogIndicator.Create(ActionType.Set, txnStamp.UserID, txnStamp.RecordTime));
#endregion
//預定回廠日
TMSTransaction.ModifyToolSystemAttribute(_ToolData, "USERDEFINECOL04", ttbDate.Text, txnStamp);
cts.Complete();
}
ClearField();
AjaxFocus(ttbToolName);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
private void UpdateToolType(int rowIndex)
{
int index = gvQuery.Rows[rowIndex].DataItemIndex;
string sToolType = ((TextBox)gvQuery.Rows[rowIndex].FindControl("ttbType")).Text;
RadioButton rbtEnable = (RadioButton)gvQuery.Rows[rowIndex].FindControl("rbEnable");
TextBox ttbDescr = (TextBox)gvQuery.Rows[rowIndex].FindControl("ttbDescription");
uscAttributeSetupGrid.ValidateCheck();
var toolTypeData = (ToolTypeInfo)ToolTypeList[index].DeepCopy();
toolTypeData.Description = ttbDescr.Text;
toolTypeData["UPDATETIME"] = DBCenter.GetSystemTime();
toolTypeData["USERID"] = Page.User.Identity.Name;
if (rbtEnable.Checked == true)
{
toolTypeData.Status = "Enable";
toolTypeData.ActiveFlag = "T";
}
else
{
toolTypeData.Status = "Disable";
}
//儲存系統屬性
_SystemAttribute.SaveSystemAttribute(toolTypeData);
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, this.ApplicationName);
using (CimesTransactionScope cts = CimesTransactionScope.Create())
{
if (toolTypeData.UpdateToDB() == 0)
{
throw new Exception(TextMessage.Error.T00747(""));
}
uscAttributeSetupGrid.ExcuteTransaction(toolTypeData.ID, toolTypeData.UserID, toolTypeData.UpdateTime);
//處理刀壽
SaveToolLife(sToolType, txnStamp.UserID, txnStamp.RecordTime);
//儲存刀具圖檔
SaveToolPicture(sToolType, txnStamp.UserID, txnStamp.RecordTime);
cts.Complete();
}
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00083(sToolType));
ToolTypeList[index] = toolTypeData;
}
/// <summary>
/// 確認
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
if (_SelectLotDatas.Count > 0)
{
_SelectLotDatas.ForEach(lot =>
{
//將勾選的入庫資料塞到ERP TEMP表 To do...
//將入庫單號回寫到INVNO
WIPTransaction.ModifyLotSystemAttribute(lot, "INVNO", ttbScrapNo.Text, txnStamp);
//將勾選的批號結批
WIPTransaction.TerminateLot(lot, txnStamp);
});
#region 更新命名規則
if (_ExecuteNamingSQLList != null && _ExecuteNamingSQLList.Count > 0)
{
DBCenter.ExecuteSQL(_ExecuteNamingSQLList);
}
#endregion
cts.Complete();
}
else
{
//[00816]請至少選取一個{0}！
throw new Exception(TextMessage.Error.T00816(GetUIResource("WorkpieceLot")));
}
}
ClearField();
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 確認
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
//確認模具是否有輸入
ttbToolName.Must(lblToolName);
//確認機台是否有輸入
ttbEquip.Must(lblEquip);
using (var cts = CimesTransactionScope.Create())
{
//配件上機台
TMSTxn.Default.AddToolToEquipment(new List <ToolInfo>()
{
_ToolData
}, _EquipData, txnStamp);
var newStateInfo = ToolStateInfo.GetToolStateByState("USED");
if (newStateInfo == null)
{
// 模治具狀態：{0}不存在!!
throw new Exception(RuleMessage.Error.C10032("USED"));
}
//變更配件狀態為USED
TMSTransaction.ChangeToolState(_ToolData, newStateInfo, txnStamp);
cts.Complete();
}
ClearField();
AjaxFocus(ttbToolName);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 確認
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
//確認模具是否有輸入
ttbToolName.Must(lblToolName);
using (var cts = CimesTransactionScope.Create())
{
#region 變更配件狀態為IDLE
var newStateInfo = ToolStateInfo.GetToolStateByState("IDLE");
if (newStateInfo == null)
{
// 模具狀態：{0}不存在!!
throw new Exception(RuleMessage.Error.C10027("IDLE"));
}
TMSTransaction.ChangeToolState(_ToolData, newStateInfo, txnStamp);
#endregion
//將配件上的鉗修次數重置成0 (MES_TOOL_MAST. USERDEFINECOL01)
TMSTransaction.ModifyToolSystemAttribute(_ToolData, "USERDEFINECOL01", "0", txnStamp);
//將配件上的降模次數重置成0 (MES_TOOL_MAST. USERDEFINECOL02)
TMSTransaction.ModifyToolSystemAttribute(_ToolData, "USERDEFINECOL02", "0", txnStamp);
cts.Complete();
}
ClearField();
AjaxFocus(ttbToolName);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 系統事件 : btnPrint Click時觸發
/// 將產生的ReportDocument 匯出成為PDF格式的檔案
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnPrint_Click(object sender, EventArgs e)
{
try
{
if (toolData == null)
{
throw new Exception(TextMessage.Error.T00060(""));
}
_dsReport.Tables.Clear();
// 取得Report資料
_dsReport = GetRunCardDataSource(toolData);
_dsReport.AcceptChanges();
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
var printLotInfo = InfoCenter.Create <CSTToolLabelPrintLogInfo>();
printLotInfo.ToolName = toolData.ToolName;
printLotInfo.RuleName = ProgramRight;
printLotInfo.InsertToDB(txnStamp.UserID, txnStamp.RecordTime);
cts.Complete();
}
if (_dsReport.Tables.Count > 0)
{
string sPrintProgram = "/CustomizeRule/ToolRule/T022View.aspx";
string sHost = Request.Url.Host;
string sApplicationPath = Request.ApplicationPath;
string ReportPath = "http://" + sHost + sApplicationPath + sPrintProgram;
Session["T022View"] = _dsReport;
//開啟查詢工單頁面
string openPrintWindow = "window.open('" + ReportPath + "','pop','resizable: yes; status: no; scrollbars:no; menubar:no;toolbar:no;location:no;dialogLeft:10px;dialogTop:10px;dialogHeight:10px;dialogWidth:10px',false);";
ScriptManager.RegisterStartupScript(UpdatePanel1, UpdatePanel1.GetType(), Guid.NewGuid().ToString(), openPrintWindow, true);
}
}
catch (Exception E)
{
HandleError(E);
}
}
protected void gvQuery_RowDeleting(object sender, GridViewDeleteEventArgs e)
{
try
{
int dataIndex = gvQuery.Rows[e.RowIndex].DataItemIndex;
//取得登入者資訊
var recordTime = DBCenter.GetSystemTime();
var userID = User.Identity.Name;
using (CimesTransactionScope cts = CimesTransactionScope.Create())
{
//刪除主檔資料
_ToolDevices[dataIndex].DeleteFromDB();
LogCenter.LogToDB(_ToolDevices[dataIndex], LogCenter.LogIndicator.Create(ActionType.Remove, userID, recordTime));
//取得明細資料
var toolDeviceDetails = CSTToolDeviceDetailInfo.GetDataListByToolDeviceSID(_ToolDevices[dataIndex].ToolDeviceSID);
toolDeviceDetails.ForEach(toolDeviceDetail =>
{
//刪除明細資料
toolDeviceDetail.DeleteFromDB();
LogCenter.LogToDB(toolDeviceDetail, LogCenter.LogIndicator.Create(ActionType.Remove, userID, recordTime));
});
cts.Complete();
}
QueryData();
}
catch (Exception E)
{
HandleError(E);
}
}
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
// 子單元不存在拋錯
if (_ComponentInfo == null)
{
throw new RuleCimesException(TextMessage.Error.T00045(GetUIResource("Component")));
}
// 批號不存在拋錯
if (ProcessLotData == null)
{
throw new RuleCimesException(TextMessage.Error.T00045(GetUIResource("Lot")));
}
// 批號狀態必須為Wait
if (ProcessLotData.Status != "Wait")
{
throw new RuleCimesException(TextMessage.Error.T00424());
}
// 原因碼
ddlDefectReason.Must(lblDefectReason);
var txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
//取得原因碼資訊
var reasonData = InfoCenter.GetBySID <ReasonCategoryInfo>(ddlDefectReason.SelectedValue);
//取得不良子批批號名稱
var splitLotNaming = GetNamingRule("SplitLot", txnStamp.UserID, ProcessLotData);
//批號拆子批
var splitLot = SplitLotInfo.CreateSplitLotByLotAndQuantity(ProcessLotData.Lot, splitLotNaming.First[0], new List <ComponentInfo>()
{
_ComponentInfo
}, reasonData, reasonData.Description);
WIPTxn.Default.SplitLot(ProcessLotData, splitLot, WIPTxn.SplitIndicator.Create(), txnStamp);
if (splitLotNaming.Second != null && splitLotNaming.Second.Count != 0)
{
DBCenter.ExecuteSQL(splitLotNaming.Second);
}
//註記不良
var compDefect = ComponentDefectObject.Create(_ComponentInfo, _ComponentInfo.ComponentQuantity, 0, reasonData, ttbDefectDesc.Text.Trim());
WIPTransaction.DefectComponent(splitLot, new List <ComponentDefectObject>()
{
compDefect
}, WIPTransaction.DefectIndicator.Create(), txnStamp);
#region 送至待判工作站
//取得目前批號的流程線上版本
RouteVersionInfo RouteVersion = RouteVersionInfo.GetRouteActiveVersion(ProcessLotData.RouteName);
//以目前工作站名稱去查詢在所有流程中的序號
var routeOperation = RouteOperationInfo.GetRouteAllOperations(RouteVersion).Find(p => p.OperationName == _JudgeOperationName);
//以目前工作站名稱去查詢在所有流程中的序號
var reasonCategory = ReasonCategoryInfo.GetReasonCategoryByCategoryNameAndReason("Common", "OTHER");
var modifyAttrList = new List <ModifyLotAttributeInfo>();
//將批號的UDC01註記不良批
modifyAttrList.Add(ModifyLotAttributeInfo.CreateLotSystemAttributeInfo("USERDEFINECOL01", "Y"));
//將批號的UDC02註記工作站序號
modifyAttrList.Add(ModifyLotAttributeInfo.CreateLotSystemAttributeInfo("USERDEFINECOL02", splitLot.OperationSequence));
//將批號的UDC03註記工作站名稱
modifyAttrList.Add(ModifyLotAttributeInfo.CreateLotSystemAttributeInfo("USERDEFINECOL03", splitLot.OperationName));
WIPTransaction.ModifyLotMultipleAttribute(splitLot, modifyAttrList, txnStamp);
WIPTransaction.ReassignOperation(splitLot, routeOperation, reasonCategory, reasonCategory.Description, txnStamp);
#endregion
cts.Complete();
}
LoadDefaultControl();
ClearField();
ttbWOLot.Text = "";
AjaxFocus(ttbWOLot);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
// 子單元不存在拋錯
if (ComponentInfo == null)
{
throw new RuleCimesException(TextMessage.Error.T00045(GetUIResource("Component")));
}
// 批號不存在拋錯
if (ProcessLotData == null)
{
throw new RuleCimesException(TextMessage.Error.T00045(GetUIResource("Lot")));
}
// 定義交易戳記
var txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
bool inSpec = true;
if (_CenterHoleFlag != "N")
{
gvComponentEDC.Rows.LoopDo <GridViewRow>((p, i) => {
// 取得TextBox Control
var ttbEDC = p.FindControl("ttbEDC") as TextBox;
if (ttbEDC.Text.IsNullOrEmpty())
{
throw new RuleCimesException(TextMessage.Error.T00043(GetUIResource("CenterHoleData")));
}
// 是否符合規格判斷
var measureVal = ttbEDC.Text.ToDecimal();
if (measureVal > SAICenterHole.Remark02.ToDecimal())
{
inSpec = false;
}
if (measureVal < SAICenterHole.Remark03.ToDecimal())
{
inSpec = false;
}
// 將量測資料記錄到客製表
var edcCompInfo = InfoCenter.Create <CSTEDCComponentInfo>();
edcCompInfo.ComponentID = ComponentInfo.ComponentID;
edcCompInfo.Data = measureVal;
edcCompInfo.UpSpecification = SAICenterHole.Remark02.ToDecimal();
edcCompInfo.LowSpecification = SAICenterHole.Remark03.ToDecimal();
edcCompInfo.INSPEC = inSpec == true ? "OK" : "NG";
edcCompInfo.Lot = ProcessLotData.Lot;
edcCompInfo["LINKSID"] = txnStamp.LinkSID;
edcCompInfo["PARAMETER"] = "SC" + (i + 1).ToString();
edcCompInfo.InsertToDB(txnStamp.UserID, txnStamp.RecordTime);
});
}
if (!ttbTemperature.Text.IsNullOrEmpty())
{
// 溫度必須是數值
ttbTemperature.MustDecimal(lblTemperature);
// 將量測資料記錄到客製表
var edcCompInfo = InfoCenter.Create <CSTEDCComponentInfo>();
edcCompInfo.ComponentID = ComponentInfo.ComponentID;
edcCompInfo.Data = ttbTemperature.Text.ToDecimal();
edcCompInfo.Lot = ProcessLotData.Lot;
edcCompInfo["LINKSID"] = txnStamp.LinkSID;
edcCompInfo["PARAMETER"] = "Temperature";
edcCompInfo.InsertToDB(txnStamp.UserID, txnStamp.RecordTime);
}
var lstCompAttr = new List <ModifyAttributeInfo>();
// 紀錄子單元量測時間
lstCompAttr.Add(ModifyAttributeInfo.CreateSystemAttributeInfo("CENTER_HOLE_TIME", txnStamp.RecordTime));
lstCompAttr.Add(ModifyAttributeInfo.CreateSystemAttributeInfo("DMC", ttbWorkpiece.Text.Trim()));
if (inSpec)
{
// 修改子單元系統屬性
lstCompAttr.Add(ModifyAttributeInfo.CreateSystemAttributeInfo("CENTER_HOLE_FLAG", "OK"));
WIPTransaction.ModifyLotComponentMultipleAttribute(ProcessLotData, ComponentInfo, lstCompAttr, txnStamp);
}
else
{
// 修改子單元系統屬性
lstCompAttr.Add(ModifyAttributeInfo.CreateSystemAttributeInfo("CENTER_HOLE_FLAG", "NG"));
WIPTransaction.ModifyLotComponentMultipleAttribute(ProcessLotData, ComponentInfo, lstCompAttr, txnStamp);
#region 若不在規格範圍內則拆批至待判站點
var lstSourceLot = new List <LotInfo>();
List <SqlAgent> splitLotArchiSQLList = new List <SqlAgent>();
List <ComponentInfo> lsComponentDatas = new List <ComponentInfo>();
lsComponentDatas.Add(ComponentInfo);
var generator = NamingIDGenerator.GetRule("SplitLot");
if (generator == null)
{
//WRN-00411,找不到可產生的序號，請至命名規則維護設定，規則名稱：{0}!!!
throw new Exception(TextMessage.Error.T00437("SplitLot"));
}
var serialData = generator.GenerateNextIDs(1, ProcessLotData, new string[] { }, User.Identity.Name);
splitLotArchiSQLList = serialData.Second;
var splitLotID = serialData.First[0];
var reasonCategoryInfo = ReasonCategoryInfo.GetReasonCategoryByCategoryNameAndReason("Common", "OTHER");
SplitLotInfo splitLotData = SplitLotInfo.CreateSplitLotByLotAndQuantity(ProcessLotData.Lot, splitLotID, lsComponentDatas, reasonCategoryInfo, "EDC");
WIPTxn.SplitIndicator splitInd = WIPTxn.SplitIndicator.Create();
WIPTxn.Default.SplitLot(ProcessLotData, splitLotData, splitInd, txnStamp);
//若子單元為自動產生，更新序號至DB
if (splitLotArchiSQLList != null && splitLotArchiSQLList.Count > 0)
{
DBCenter.ExecuteSQL(splitLotArchiSQLList);
}
#endregion
var splitLotInfo = LotInfo.GetLotByLot(splitLotID);
// 新增Defect
List <ComponentDefectObject> lstCompDefectObj = new List <ComponentDefectObject>();
var reason = ReasonCategoryInfo.GetReasonCategoryByCategoryNameAndReason("CustomizeReason", "MeasureNG_MES");
lstCompDefectObj.Add(ComponentDefectObject.Create(ComponentInfo, 1, 0, reason, "CENTER_HOLE_FLAG:NG"));
WIPTransaction.DefectComponent(splitLotInfo, lstCompDefectObj, WIPTransaction.DefectIndicator.Create(), txnStamp);
#region ReassignOperation
// 取得待判站點設定
var saiJudgeOperation = WpcExClassItemInfo.GetExClassItemInfo("SAIJudgeOperation", splitLotInfo["PROCESS"].ToString());
if (saiJudgeOperation.Count == 0)
{
throw new RuleCimesException(TextMessage.Error.T00555("SAIJudgeOperation", splitLotInfo["PROCESS"].ToString()));
}
var reassignOperationInfo = RouteOperationInfo.GetLotAllRouteOperations(splitLotInfo).Find(oper => oper.OperationName == saiJudgeOperation[0].Remark02);
if (reassignOperationInfo == null)
{
throw new RuleCimesException(RuleMessage.Error.C10050());
}
var lstLotAttr = new List <ModifyLotAttributeInfo>();
// 修改批號系統屬性
lstLotAttr.Add(ModifyLotAttributeInfo.CreateLotSystemAttributeInfo("USERDEFINECOL01", "Y"));
lstLotAttr.Add(ModifyLotAttributeInfo.CreateLotSystemAttributeInfo("USERDEFINECOL02", splitLotInfo.OperationSequence));
lstLotAttr.Add(ModifyLotAttributeInfo.CreateLotSystemAttributeInfo("USERDEFINECOL03", splitLotInfo.OperationName));
WIPTransaction.ModifyLotMultipleAttribute(splitLotInfo, lstLotAttr, txnStamp);
WIPTransaction.ReassignOperation(splitLotInfo, reassignOperationInfo, reasonCategoryInfo, "EDCSplitReassignOperation", txnStamp);
WIPTransaction.ResetLotRule(splitLotInfo, txnStamp);
#endregion
}
cts.Complete();
}
ClearUI();
AjaxFocus(ttbWorkpiece);
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 確定
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
//檢查維修原因是否有選擇
ddlRepairReasonCode.Must(lblJudgeReason);
#region 檢查維修結果是否有選擇
if (rdbOK.Checked == false && rdbNG.Checked == false)
{
throw new Exception(TextMessage.Error.T00841(lblRepairResult.Text));
}
#endregion
using (var cts = CimesTransactionScope.Create())
{
//選取的原因碼
var reasonCategory = InfoCenter.GetBySID <ReasonCategoryInfo>(ddlRepairReasonCode.SelectedValue);
#region 紀錄維修結束 To do...
List <WIPRepairFinishInfo> repairFinishDatas = new List <WIPRepairFinishInfo>();
var repairData = WIPRepairInfo.GetRepairByLotAndReason(_LotData.Lot, _DefectJudgementData.Reason);
var repairFinishData = WIPRepairFinishInfo.CreateInfo(repairData);
repairFinishData.ActionCategory = reasonCategory.Category;
repairFinishData.ActionReasonCode = reasonCategory.Reason;
repairFinishData.ActionReasonSID = reasonCategory.ReasonSID;
repairFinishData.Result = rdbOK.Checked ? "OK" : "NG";
repairFinishDatas.Add(repairFinishData);
var issueOperation = OperationInfo.GetOperationByName(_LotData.OperationName);
WIPTransaction.RepairEnd(_LotData, repairFinishDatas, issueOperation, txnStamp);
#endregion
#region 2017/10/26 跟詩涵確認，無論維修結果如何，一律送回待判站由品保決定處理結果
/*
#region OK：依照批號的UDC02(工作站序號)+UDC03(工作站名稱)找出預設流程的下一站點，將批號跳站至該站
*
* if (rdbOK.Checked)
* {
* //取得流程線上版本 取得目前Lot的所有流程(所有工作站)
* RouteVersionInfo RouteVersion = RouteVersionInfo.GetRouteActiveVersion(_LotData.RouteName);
*
* //以此工作站名稱去查詢在流程中的序號
* var routeOperation = RouteOperationInfo.GetRouteAllOperations(RouteVersion).Find(p => p.OperationName == _LotData.UserDefineColumn03);
*
* var lastOperationSeq = string.Format("{0:000}", (Convert.ToDecimal(routeOperation.OperationSequence) + 1));
*
* //下一個工作站 用LOT和流程中下一站的序號去查出下一個工作站資訊
* var NextRouteOperation = RouteOperationInfo.GetRouteOperationByLotSequence(_LotData, lastOperationSeq);
*
* if (NextRouteOperation == null)
* {
* //批號：{0}已無下個工作站點，請確認[流程設定]
* throw new Exception(RuleMessage.Error.C10008(_LotData.Lot));
* }
*
* //將批號的UDC02清空
* WIPTransaction.ModifyLotSystemAttribute(_LotData, "USERDEFINECOL02", "", txnStamp);
*
* //將批號的UDC03清空
* WIPTransaction.ModifyLotSystemAttribute(_LotData, "USERDEFINECOL03", "", txnStamp);
*
* //執行出站
* WIPTransaction.CheckOut(_LotData, txnStamp);
*
* WIPTransaction.ReassignOperation(_LotData, NextRouteOperation, reasonCategory, ttbRepairDescr.Text, txnStamp);
* }
#endregion
*
#region NG：送到下一站
* if (rdbNG.Checked)
* {
* //執行出站
* WIPTransaction.CheckOut(_LotData, txnStamp);
*
* WIPTransaction.DispatchLot(_LotData, txnStamp);
* }
#endregion
*
*/
#endregion
//執行出站
WIPTransaction.CheckOut(_LotData, txnStamp);
WIPTransaction.DispatchLot(_LotData, txnStamp);
cts.Complete();
}
ClearField();
AjaxFocus(ttbLot);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 確定
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
#region 確認選擇結果，如果是選擇NG，確認是否有選擇原因碼
string result = "";
if (rdbOK.Checked)
{
result = "OK";
}
else if (rdbNG.Checked)
{
result = "NG";
//確認是否有選擇原因碼
ddlFAIReasonCode.Must(lblFAIReasonCode);
}
else if (rdbPASS.Checked)
{
result = "PASS";
}
else if (rdbCLOSE.Checked)
{
result = "CLOSE";
//確認是否有選擇原因碼
ddlFAIReasonCode.Must(lblFAIReasonCode);
}
#endregion
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
#region 更新檢驗主檔[MES_QC_INSP]
//取得檢驗主檔資料
var QCInsepctionData = InfoCenter.GetBySID <QCInspectionInfo>(_SelectedQCData.QCInspectionSID).ChangeTo <QCInspectionInfoEx>();
//原因碼
ReasonCategoryInfo reason = null;
//有選擇原因碼才更新[NG_Category]及[NG_Reason]
if (string.IsNullOrEmpty(ddlFAIReasonCode.SelectedValue) == false)
{
reason = InfoCenter.GetBySID <ReasonCategoryInfo>(ddlFAIReasonCode.SelectedValue);
QCInsepctionData.NG_Category = reason.Category;
QCInsepctionData.NG_Reason = reason.Reason;
}
//如果判定結果為結單的話，則必須把結單時間及人員資料寫回資料庫
if (result == "CLOSE")
{
QCInsepctionData.FINISHTIME = txnStamp.RecordTime;
QCInsepctionData.FINISHUSER = txnStamp.UserID;
}
QCInsepctionData.NG_Description = ttbDescr.Text;
QCInsepctionData.Result = result;
QCInsepctionData.Status = "Finished";
QCInsepctionData.UpdateToDB(txnStamp.UserID, txnStamp.RecordTime);
#endregion
#region 更新機台檢驗主檔[CST_WIP_CMM]
if (_CSTWIPCMMList != null)
{
//更新檢驗主檔的QCInspectionSID欄位
_CSTWIPCMMList.ForEach(data =>
{
data.QCInspectionSID = QCInsepctionData.ID;
data.UpdateToDB();
});
}
#endregion
#region 更新機台資訊
//取得相同BatchID的檢驗資料
var QCDataList = QCInspectionInfoEx.GetDataListByBatchID(_SelectedQCData.BatchID);
//相同BatchID都已完成檢驗旗標
bool isAllFinish = true;
QCDataList.ForEach(p =>
{
if (!(p.Status == "Finished"))
{
isAllFinish = false;
}
});
//取得lot資料
var lot = InfoCenter.GetBySID <LotInfo>(_SelectedQCData.ObjectSID);
//更新機台屬性[FAICOUNT]
CustomizeFunction.UpdateFAI(_SelectedQCData.EquipmentName, lot.Lot, (rdbNG.Checked) ? true : false, txnStamp);
//如果相同的BatchID都檢驗完成或選擇結果為NG時，則更新狀態為IDLE及更新FAICOUNT
if (isAllFinish)
{
//取得機台狀態資料
var newStateInfo = EquipmentStateInfo.GetEquipmentStateByState("IDLE");
var equipData = EquipmentInfo.GetEquipmentByName(_SelectedQCData.EquipmentName);
//更新機台狀態
EMSTransaction.ChangeState(equipData, newStateInfo, txnStamp);
}
#endregion
//如果判定結果選擇為NG，則必須拆批送待判
if (rdbNG.Checked)
{
//判定NG直接拆批及送待判工作站
CustomizeFunction.SplitDefectLot(_SelectedQCData.ComponentLot, ttbDescr.Text, reason, txnStamp);
}
cts.Complete();
}
ClearField();
AjaxFocus(ttbLot);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
ttbEquipmentName.Must(lblEquipment);
ttbDevice1.Must(lblDevice1);
//料號1一定要有資料
if (_DeviceInfo1 == null)
{
throw new RuleCimesException(TextMessage.Error.T00826(lblDevice1.Text));
}
//一定要輸入一種料號
if (_dtVerifiy1 == null)
{
throw new RuleCimesException(TextMessage.Error.T00826(lblDevice1.Text));
}
//若有輸入料號1則需驗證應領數量與領用數量是否相同
if (_dtVerifiy1 != null)
{
_dtVerifiy1.Rows.LoopDo <DataRow>((p, i) =>
{
if (p["NEEDQTY"].ToDecimal() != p["EQPTOOLCOUNT"].ToDecimal())
{
throw new RuleCimesException(RuleMessage.Error.C10141(_EquipmentInfo.EquipmentName, _DeviceInfo1.DeviceName, p["TOOLTYPE"].ToString(), p["NEEDQTY"].ToString()));
}
});
}
//若有輸入料號2則需驗證應領數量與領用數量是否相同
if (_dtVerifiy2 != null)
{
_dtVerifiy2.Rows.LoopDo <DataRow>((p, i) =>
{
if (p["NEEDQTY"].ToDecimal() != p["EQPTOOLCOUNT"].ToDecimal())
{
throw new RuleCimesException(RuleMessage.Error.C10141(_EquipmentInfo.EquipmentName, _DeviceInfo1.DeviceName, p["TOOLTYPE"].ToString(), p["NEEDQTY"].ToString()));
}
});
}
string sReleaseID = DBCenter.GetSystemID();
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
//先將舊的資料刪除
var lstEqpToolRelease = CSTEquipmentToolReleaseInfo.GetDataByEquipment(_EquipmentInfo.EquipmentName);
lstEqpToolRelease.ForEach(p => {
p.DeleteFromDB();
LogCenter.LogToDB(p, LogCenter.LogIndicator.Create(ActionType.Remove, txnStamp.UserID, txnStamp.RecordTime));
});
var lstEqpTool = EquipToolInfo.GetByEquipmentName(_EquipmentInfo.EquipmentName);
lstEqpTool.ForEach(p => {
//取得配件資訊
var toolInfo = ToolInfo.GetToolByName(p.ToolName);
//新增至CST_EQP_TOOL_RELEASE的Info物件
var eqpToolReleaseInfo = InfoCenter.Create <CSTEquipmentToolReleaseInfo>();
eqpToolReleaseInfo.EquipmentName = _EquipmentInfo.EquipmentName;
eqpToolReleaseInfo.ToolName = toolInfo.ToolName;
eqpToolReleaseInfo.HEAD = toolInfo["HEAD"].ToString();
eqpToolReleaseInfo.RELEASEID = sReleaseID;
eqpToolReleaseInfo["OPERATION"] = toolInfo.UserDefineColumn08;
eqpToolReleaseInfo.InsertToDB(txnStamp.UserID, txnStamp.RecordTime);
LogCenter.LogToDB(eqpToolReleaseInfo, LogCenter.LogIndicator.Create(ActionType.Add, txnStamp.UserID, txnStamp.RecordTime));
//異動Tool的RELEASEID欄位
TMSTransaction.ModifyToolSystemAttribute(toolInfo, "RELEASEID", sReleaseID, txnStamp);
});
//先將舊的資料刪除
var lstEqpDeviceRelease = CSTEquipmentDeviceReleaseInfo.GetDataByEquipment(_EquipmentInfo.EquipmentName);
lstEqpDeviceRelease.ForEach(p => {
p.DeleteFromDB();
LogCenter.LogToDB(p, LogCenter.LogIndicator.Create(ActionType.Remove, txnStamp.UserID, txnStamp.RecordTime));
});
if (_dtVerifiy1 != null)
{
//新增至CST_EQP_DEVICE_RELEASE的Info物件
var eqpDeviceReleaseInfo = InfoCenter.Create <CSTEquipmentDeviceReleaseInfo>();
eqpDeviceReleaseInfo.EquipmentName = _EquipmentInfo.EquipmentName;
eqpDeviceReleaseInfo.DeviceName = _DeviceInfo1.DeviceName;
eqpDeviceReleaseInfo.RELEASEID = sReleaseID;
eqpDeviceReleaseInfo.InsertToDB(txnStamp.UserID, txnStamp.RecordTime);
LogCenter.LogToDB(eqpDeviceReleaseInfo, LogCenter.LogIndicator.Create(ActionType.Add, txnStamp.UserID, txnStamp.RecordTime));
}
if (_dtVerifiy2 != null)
{
//新增至CST_EQP_DEVICE_RELEASE的Info物件
var eqpDeviceReleaseInfo = InfoCenter.Create <CSTEquipmentDeviceReleaseInfo>();
eqpDeviceReleaseInfo.EquipmentName = _EquipmentInfo.EquipmentName;
eqpDeviceReleaseInfo.DeviceName = _DeviceInfo2.DeviceName;
eqpDeviceReleaseInfo.RELEASEID = sReleaseID;
eqpDeviceReleaseInfo.InsertToDB(txnStamp.UserID, txnStamp.RecordTime);
LogCenter.LogToDB(eqpDeviceReleaseInfo, LogCenter.LogIndicator.Create(ActionType.Add, txnStamp.UserID, txnStamp.RecordTime));
}
cts.Complete();
}
((ProgramInformationBlock)ProgramInformationBlock1).ShowMessage(TextMessage.Hint.T00057(GetUIResource("ToolVerifiy")));
ClearField();
AjaxFocus(ttbEquipmentName);
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 確認
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
if (_SelectLotDatas.Count > 0)
{
string sLotInString = "";
// 組出where in字串
_SelectLotDatas.ForEach(p =>
{
sLotInString += "'" + p.Lot + "',";
});
sLotInString = sLotInString.EndsWith(",") ? sLotInString.Substring(0, sLotInString.Length - 1) : sLotInString;
var dtInvData = DBCenter.GetDataTable(@"SELECT WO,INVLOT,SUM(QUANTITY) QUANTITY,DEVICE,FACTORY FROM MES_WIP_LOT WHERE LOT IN(" + sLotInString + ") GROUP BY WO,INVLOT,DEVICE,FACTORY ORDER BY WO");
string headerSID = "";
string date = txnStamp.RecordTime.Substring(0, 10).Replace("/", "");
string time = txnStamp.RecordTime.Substring(11).Replace(":", "");
string preWo = string.Empty;
int seq = 1;
// SAI倉位對應表
var lstSAIWarehouse = WpcExClassItemInfo.GetInfoByClass("SAIWarehouse");
dtInvData.Rows.LoopDo <DataRow>((p, i) =>
{
string currentWO = p["WO"].ToString();
string device = p["DEVICE"].ToString();
string factory = p["FACTORY"].ToString();
string invLot = p["INVLOT"].ToString();
string qty = p["QUANTITY"].ToString();
if (preWo != currentWO)
{
seq = 1;
headerSID = DBCenter.GetSystemID();
DBCenter.ExecuteParse(@"INSERT INTO PPFHK (SID, WDATE, WTIME, BUDAT, AUFNR, FLAG)
VALUES (#[STRING], #[STRING], #[STRING], #[STRING], #[STRING],'N')", headerSID, date, time, date, currentWO);
}
//寫入PPFHP
//WERKS:Factory
//LGORT:入庫倉位
//CHARG:INVLOT
//MATNR:Device
var lstDetail = _SelectLotDatas.FindAll(select => select.InventoryLot == invLot);
var warehouseInfo = lstSAIWarehouse.Find(wpcItem => wpcItem.Remark01 == lstDetail[0].Process && wpcItem.Remark03 == "DEFECT");
if (warehouseInfo == null)
{
//T00555:查無資料，請至系統資料維護新增類別{0}、項目{1}!
throw new CimesException(TextMessage.Error.T00555("SAIWarehouse", lstDetail[0].Process + "Remark03:DEFECT"));
}
DBCenter.ExecuteParse(@"INSERT INTO PPFHP (SID, SEQNR, WDATE, WTIME, MATNR, WERKS, LGORT, CHARG, MENGE, MEINS, FLAG)
VALUES (#[STRING], #[DECIMAL], #[STRING], #[STRING], #[STRING], #[STRING], #[STRING], #[STRING], #[STRING], #[STRING], 'N')", headerSID, seq, date, time, device, factory, warehouseInfo.Remark02, invLot, qty, lstDetail[0].Unit);
int detailseq = 1;
lstDetail.ForEach(lot => {
var defectInfo = CSTWIPDefectJudgementInfo.GetDataByLot(lot.Lot);
var reasonGroupInfo = WIPReasonGroupInfoEx.GetReasonGroupByCategory(defectInfo["REASONCATEGORY"].ToString());
var reasonGroup = reasonGroupInfo == null ? "" : reasonGroupInfo.REASONGROUP;
//寫入PPBCH
DBCenter.ExecuteParse(@"INSERT INTO PPBCH (SID, MATNR, WERKS, CHARG, SEQNO, WDATE, WTIME, CLASS, ATINN, ATWRT, FLAG)
Values (#[STRING], #[STRING], #[STRING], #[STRING], #[DECIMAL], #[STRING], #[STRING], #[STRING], #[STRING], #[STRING], 'N')", headerSID, device, factory, invLot, detailseq, date, time, reasonGroup, defectInfo["REASONCATEGORY"].ToString(), defectInfo.Reason);
detailseq += 1;
});
seq += 1;
preWo = currentWO;
});
_SelectLotDatas.ForEach(lot =>
{
//寫入WMSMaster & Detail
var wmsMaster = CSTWMSMastInfo.GetMaterialLotDataByMaterialLot(lot.InventoryLot);
if (wmsMaster == null)
{
wmsMaster = InfoCenter.Create <CSTWMSMastInfo>();
wmsMaster.Lot = lot.InventoryLot;
wmsMaster.DeviceName = lot.DeviceName;
wmsMaster.RuleName = txnStamp.RuleName;
wmsMaster.InsertToDB(txnStamp.UserID, txnStamp.RecordTime);
}
//理論上只會有一個Comp
lot.GetLotAllComponents().ForEach(comp => {
var wmsDetail = InfoCenter.Create <CSTWMSDetailInfo>();
wmsDetail.Lot = lot.InventoryLot;
wmsDetail.ComponentID = comp.ComponentID;
wmsDetail.Quantity = comp.ComponentQuantity;
wmsDetail.InsertToDB(txnStamp.UserID, txnStamp.RecordTime);
});
//將入庫單號回寫到批號身上
WIPTransaction.ModifyLotSystemAttribute(lot, "INVNO", ttbDefectNo.Text, txnStamp);
//將勾選的批號結批
WIPTransaction.TerminateLot(lot, txnStamp);
});
#region 更新命名規則
if (_ExecuteNamingSQLList != null && _ExecuteNamingSQLList.Count > 0)
{
DBCenter.ExecuteSQL(_ExecuteNamingSQLList);
}
#endregion
cts.Complete();
}
else
{
//[00816]請至少選取一個{0}！
throw new Exception(TextMessage.Error.T00816(GetUIResource("WorkpieceLot")));
}
}
ClearField();
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 確定
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
//確認是否有選擇送待判原因
ddlJudgeDefect.Must(lblJudgeDefect);
#region 檢查判定結果是否有選擇
if (rdbGoods.Checked == false && rdbRepair.Checked == false && rdbDefectInv.Checked == false && rdbScrapInv.Checked == false)
{
throw new Exception(TextMessage.Error.T00841(lblJudgeResult.Text));
}
#endregion
//檢查判定原因是否有選擇
ddlJudgeReason.Must(lblJudgeReason);
using (var cts = CimesTransactionScope.Create())
{
#region 依照選擇的判定結果，對批號進行不同的處置
//選取的判定結果
string result = "";
//選取的原因碼
var reasonCategory = InfoCenter.GetBySID <ReasonCategoryInfo>(ddlJudgeReason.SelectedValue);
#region 良品：依照批號的UDC02(工作站序號)+UDC03(工作站名稱)找出預設流程的下一站點，將批號跳站至該站
if (rdbGoods.Checked)
{
result = "Good";
//取得流程線上版本 取得目前Lot的所有流程(所有工作站)
RouteVersionInfo RouteVersion = RouteVersionInfo.GetRouteActiveVersion(_LotData.RouteName);
//取得設定包裝工作站名稱
var packingOperation = WpcExClassItemInfo.GetExtendItemListByClassAndRemarks("SAIPackingOperation");
if (packingOperation.Count == 0)
{
//T00555:查無資料，請至系統資料維護新增類別{0}、項目{1}!
throw new CimesException(TextMessage.Error.T00555("SAIPackingOperation", ""));
}
var reassignOperation = packingOperation[0];
//如果送待判站之前記錄的是包裝站，則直接跳至包裝站，反之，跳至下一站
if (reassignOperation.Remark01 == _LotData.UserDefineColumn03)
{
//取得包裝站名稱
string qcOperationName = reassignOperation.Remark01;
//取得包裝工作站資訊
var operation = OperationInfo.GetOperationByName(qcOperationName);
if (operation == null)
{
//T00171, 工作站:{0}不存在!!
throw new CimesException(TextMessage.Error.T00171(qcOperationName));
}
//根據指定的流程名稱、流程版本、工作站名稱, 找出第一個符合的流程工作站，新的站點包裝
var newOperation = RouteOperationInfo.GetRouteOperationByOperationName(_LotData.RouteName, _LotData.RouteVersion, qcOperationName);
//將批號的UDC02清空
WIPTransaction.ModifyLotSystemAttribute(_LotData, "USERDEFINECOL02", "", txnStamp);
//將批號的UDC03清空
WIPTransaction.ModifyLotSystemAttribute(_LotData, "USERDEFINECOL03", "", txnStamp);
//變更至指定工作站
WIPTransaction.ReassignOperation(_LotData, newOperation, reasonCategory, ttbJudgeDescr.Text, txnStamp);
}
else
{
//以此工作站名稱去查詢在流程中的序號
var routeOperation = RouteOperationInfo.GetRouteAllOperations(RouteVersion).Find(p => p.OperationName == _LotData.UserDefineColumn03);
var lastOperationSeq = string.Format("{0:000}", (Convert.ToDecimal(routeOperation.OperationSequence) + 1));
//下一個工作站 用LOT和流程中下一站的序號去查出下一個工作站資訊
var NextRouteOperation = RouteOperationInfo.GetRouteOperationByLotSequence(_LotData, lastOperationSeq);
if (NextRouteOperation == null)
{
//批號：{0}已無下個工作站點，請確認[流程設定]
throw new Exception(RuleMessage.Error.C10008(_LotData.Lot));
}
//將批號的UDC02清空
WIPTransaction.ModifyLotSystemAttribute(_LotData, "USERDEFINECOL02", "", txnStamp);
//將批號的UDC03清空
WIPTransaction.ModifyLotSystemAttribute(_LotData, "USERDEFINECOL03", "", txnStamp);
WIPTransaction.ReassignOperation(_LotData, NextRouteOperation, reasonCategory, ttbJudgeDescr.Text, txnStamp);
}
}
#endregion
#region 維修：紀錄維修及將批號派送至下一規則
if (rdbRepair.Checked)
{
result = "Repair";
List <WIPRepairInfo> repairDatas = new List <WIPRepairInfo>();
var componentData = ComponentInfoEx.GetDataByCurrentLot(_LotData.Lot)[0];
var repairData = WIPRepairInfo.CreateInfo(_LotData, componentData, componentData.ComponentQuantity, reasonCategory, _LotData.OperationName, _LotData.ResourceName, string.Empty, string.Empty);
repairDatas.Add(repairData);
var issueOperation = OperationInfo.GetOperationByName(_LotData.OperationName);
WIPTransaction.RepairAdd(_LotData, repairDatas, issueOperation, txnStamp);
WIPTransaction.DispatchLot(_LotData, txnStamp);
}
#endregion
#region 良品入庫：將批號狀態變更為DefectInv
if (rdbDefectInv.Checked)
{
result = "DefectInv";
WIPTransaction.ModifyLotSystemAttribute(_LotData, "STATUS", "DefectInv", txnStamp);
}
#endregion
#region 報廢品入庫：將批號狀態變更為ScrapInv
if (rdbScrapInv.Checked)
{
result = "ScrapInv";
WIPTransaction.ModifyLotSystemAttribute(_LotData, "STATUS", "ScrapInv", txnStamp);
}
#endregion
#endregion
#region 將判定結果紀錄在CST_WIP_DEFECT_JUDGEMENT，Result：良品(Goods)、維修(Repair)、不良品入庫(DefectInv)、報廢入庫(ScrapInv)
var insertData = InfoCenter.Create <CSTWIPDefectJudgementInfo>();
insertData.WIPDefectSID = _LotDefectData.DefectSID;
insertData["REASONCATEGORY"] = reasonCategory.Category;
insertData["LOT"] = _LotData.Lot;
insertData.Reason = reasonCategory.Reason;
insertData.Result = result;
insertData.Description = ttbJudgeDescr.Text;
insertData.LinkSID = WIPHistoryInfo.GetLotFirstHistory(_LotData.Lot).LinkSID;
insertData.InsertToDB(txnStamp.UserID, txnStamp.RecordTime);
#endregion
cts.Complete();
}
ttbLot.Text = "";
ClearField();
AjaxFocus(ttbLot);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
