public void TcWuMian()
{
int num;
int num18;
object obj;
try
{
IL_01:
ProjectData.ClearProjectError();
num = -2;
IL_09:
int num2 = 2;
long[] array = null;
IL_0D:
num2 = 3;
Document mdiActiveDocument = Application.DocumentManager.MdiActiveDocument;
IL_1A:
num2 = 4;
Database database = mdiActiveDocument.Database;
IL_24:
num2 = 5;
using (Transaction transaction = database.TransactionManager.StartTransaction())
{
TypedValue[] array2 = new TypedValue[1];
Array array3 = array2;
TypedValue typedValue;
typedValue..ctor(0, "TEXT");
array3.SetValue(typedValue, 0);
SelectionFilter selectionFilter = new SelectionFilter(array2);
Class36.smethod_60("请按照顺序选择>");
PromptSelectionResult selection = mdiActiveDocument.Editor.GetSelection(selectionFilter);
short num3;
double num9;
Point3d[] array4;
short num15;
checked
{
short num6;
if (selection.Status == 5100)
{
SelectionSet value = selection.Value;
num3 = (short)(value.Count - 1);
array = new long[(int)(num3 + 1)];
short num4 = 0;
short num5 = num3;
num6 = num4;
for (;;)
{
short num7 = num6;
short num8 = num5;
if (num7 > num8)
{
break;
}
DBText dbtext = (DBText)transaction.GetObject(value[(int)num6].ObjectId, 1);
array[(int)num6] = (long)Math.Round(Conversion.Val(dbtext.TextString));
unchecked
{
num6 += 1;
}
}
}
num9 = Class36.smethod_30("请输入跨度(默认6000):", 6000.0);
array4 = new Point3d[(int)(num3 + 1)];
array4[0] = CAD.GetPoint("选择插入点: ");
Point3d point3d;
if (array4[0] == point3d)
{
goto IL_5A1;
}
short num10 = 0;
short num11 = (short)(Information.UBound(array, 1) - 1);
num6 = num10;
Point3d pointAngle;
for (;;)
{
short num12 = num6;
short num8 = num11;
if (num12 > num8)
{
break;
}
pointAngle = CAD.GetPointAngle(array4[(int)num6], num9, 0.0);
CAD.AddLine(array4[(int)num6], pointAngle, "0");
array4[(int)(num6 + 1)] = CAD.GetPointAngle(array4[(int)num6], (double)array[(int)num6], 270.0);
unchecked
{
num6 += 1;
}
}
pointAngle = CAD.GetPointAngle(array4[(int)num6], num9, 0.0);
CAD.AddLine(array4[(int)num6], pointAngle, "0");
Point3d[] array5 = new Point3d[4];
Point3d[] array6 = new Point3d[4];
pointAngle = CAD.GetPointAngle(array4[0], num9, 0.0);
array5[0] = CAD.GetPointAngle(array4[0], 200.0, 45.0);
array5[1] = CAD.GetPointAngle(array4[0], 200.0, 315.0);
array6[0] = CAD.GetPointAngle(pointAngle, 200.0, 135.0);
array6[1] = CAD.GetPointAngle(pointAngle, 200.0, 225.0);
pointAngle = CAD.GetPointAngle(array4[1], num9, 0.0);
Point3d p = Class36.smethod_46(array4[1], pointAngle);
array5[2] = CAD.GetPointAngle(p, 200.0, 135.0);
array5[3] = CAD.GetPointAngle(p, 200.0, 225.0);
array6[2] = CAD.GetPointAngle(p, 200.0, 45.0);
array6[3] = CAD.GetPointAngle(p, 200.0, 315.0);
Point3d pointAngle2 = CAD.GetPointAngle(p, 141.0, 90.0);
Point3d pointAngle3 = CAD.GetPointAngle(p, (double)(array[0] + 141L), 270.0);
CAD.AddPline(array5, 0.0, false, "");
CAD.AddPline(array6, 0.0, false, "");
CAD.AddLine(pointAngle2, pointAngle3, "0");
short num13 = (short)Math.Round(unchecked ((double)Information.UBound(array, 1) / 2.0 - 1.0));
short num14 = 1;
num15 = num13 - 1;
num3 = num14;
}
for (;;)
{
short num16 = num3;
short num8 = num15;
if (num16 > num8)
{
break;
}
Point3d pointAngle = CAD.GetPointAngle(array4[(int)num3], num9 / 2.0 + Math.Pow(-1.0, (double)num3) * 70.0, 0.0);
Point3d pointAngle4 = CAD.GetPointAngle(pointAngle, (double)array[(int)num3], 270.0);
CAD.AddLine(pointAngle, pointAngle4, "0");
num3 += 1;
}
transaction.Commit();
}
IL_4FC:
num2 = 7;
if (Information.Err().Number <= 0)
{
goto IL_521;
}
IL_50D:
num2 = 8;
Interaction.MsgBox(Information.Err().Description, MsgBoxStyle.OkOnly, null);
IL_521:
goto IL_5A1;
IL_523:
int num17 = num18 + 1;
num18 = 0;
@switch(ICSharpCode.Decompiler.ILAst.ILLabel[], num17);
IL_55B:
goto IL_596;
IL_55D:
num18 = num2;
if (num <= -2)
{
goto IL_523;
}
@switch(ICSharpCode.Decompiler.ILAst.ILLabel[], num);
IL_573 :;
}
catch when(endfilter(obj is Exception & num != 0 & num18 == 0))
{
Exception ex = (Exception)obj2;
goto IL_55D;
}
IL_596:
throw ProjectData.CreateProjectError(-2146828237);
IL_5A1:
if (num18 != 0)
{
ProjectData.ClearProjectError();
}
}
public void DrawCengGaoBiao()
{
Class36.SetFocus(Application.DocumentManager.MdiActiveDocument.Window.Handle);
DocumentLock documentLock = Application.DocumentManager.MdiActiveDocument.LockDocument();
Point3d point3d = CAD.GetPoint("选择插入点: ");
checked
{
Point3d point3d2;
if (!(point3d == point3d2))
{
Class36.smethod_23(CAD.GetPointXY(point3d, 500.0, 150.0), "层号", 350.0, 0, "");
Class36.smethod_23(CAD.GetPointXY(point3d, 1800.0, 150.0), "层高(m)", 350.0, 0, "");
Class36.smethod_23(CAD.GetPointXY(point3d, 3300.0, 150.0), "标高(m)", 350.0, 0, "");
if (this.CheckBox1.Checked)
{
Class36.smethod_23(CAD.GetPointXY(point3d, 4800.0, 150.0), "墙柱砼", 350.0, 0, "");
}
if (this.CheckBox1.Checked)
{
Class36.smethod_23(CAD.GetPointXY(point3d, 6300.0, 150.0), "梁板砼", 350.0, 0, "");
}
short num = (short)this.DataGridView1.Rows.Count;
CAD.AddLine(CAD.GetPointXY(point3d, 1500.0, 0.0), CAD.GetPointXY(point3d, 1500.0, (double)((num + 1) * 600)), "0");
CAD.AddLine(CAD.GetPointXY(point3d, 3000.0, 0.0), CAD.GetPointXY(point3d, 3000.0, (double)((num + 1) * 600)), "0");
if (this.CheckBox1.Checked)
{
CAD.AddLine(CAD.GetPointXY(point3d, 4500.0, 0.0), CAD.GetPointXY(point3d, 4500.0, (double)((num + 1) * 600)), "0");
}
if (this.CheckBox1.Checked)
{
CAD.AddLine(CAD.GetPointXY(point3d, 6000.0, 0.0), CAD.GetPointXY(point3d, 6000.0, (double)((num + 1) * 600)), "0");
}
long num2 = 5000L;
if (this.CheckBox1.Checked)
{
num2 = 7500L;
}
CAD.AddLine(CAD.GetPointXY(point3d, 0.0, (double)(num * 600)), CAD.GetPointXY(point3d, (double)num2, (double)(num * 600)), "0");
CAD.AddLine(CAD.GetPointXY(point3d, 0.0, (double)((num - 1) * 600)), CAD.GetPointXY(point3d, (double)num2, (double)((num - 1) * 600)), "0");
num -= 2;
string[] array = new string[(int)(num + 1)];
string[] array2 = new string[(int)(num + 1)];
string[] array3 = new string[(int)(num + 1 + 1)];
string[] array4 = new string[(int)(num + 1)];
string[] array5 = new string[(int)(num + 1 + 1)];
array5[0] = "-";
short num3 = 0;
short num4 = num;
short num5 = num3;
for (;;)
{
short num6 = num5;
short num7 = num4;
if (num6 > num7)
{
break;
}
CAD.AddLine(CAD.GetPointXY(point3d, 0.0, (double)(num5 * 600)), CAD.GetPointXY(point3d, (double)num2, (double)(num5 * 600)), "0");
array[(int)num5] = Conversions.ToString(this.DataGridView1.Rows[(int)num5].Cells[0].Value);
double num8 = Conversions.ToDouble(Operators.DivideObject(this.DataGridView1.Rows[(int)num5].Cells[1].Value, 1000));
array2[(int)num5] = Strings.Format(num8, "0.000");
if (Operators.ConditionalCompareObjectEqual(this.DataGridView1.Rows[(int)num5].Cells[2].Value, "0.000", false))
{
array3[(int)num5] = Conversions.ToString(this.DataGridView1.Rows[(int)num5].Cells[2].Value);
}
else
{
array3[(int)num5] = Conversions.ToString(this.DataGridView1.Rows[(int)num5].Cells[2].Value);
}
if (this.CheckBox1.Checked)
{
array4[(int)num5] = Conversions.ToString(this.DataGridView1.Rows[(int)num5].Cells[3].Value);
if (!array4[(int)num5].ToUpper().Contains("C"))
{
array4[(int)num5] = "C" + array4[(int)num5].ToUpper();
}
else
{
array4[(int)num5] = array4[(int)num5].ToUpper();
}
}
if (this.CheckBox1.Checked)
{
array5[(int)(num5 + 1)] = Conversions.ToString(this.DataGridView1.Rows[(int)num5].Cells[4].Value);
if (!array5[(int)(num5 + 1)].ToUpper().Contains("C"))
{
array5[(int)(num5 + 1)] = "C" + array5[(int)(num5 + 1)].ToUpper();
}
else
{
array5[(int)(num5 + 1)] = array5[(int)(num5 + 1)].ToUpper();
}
}
unchecked
{
num5 += 1;
}
}
double num9 = Conversions.ToDouble(Operators.AddObject(this.DataGridView1.Rows[(int)num].Cells[2].Value, Operators.DivideObject(this.DataGridView1.Rows[(int)num].Cells[1].Value, 1000)));
array3[(int)(num + 1)] = Strings.Format(num9, "0.000");
Class36.smethod_21(CAD.GetPointXY(point3d, 1000.0, 150.0), array, 300.0, -2.0);
Class36.smethod_20(CAD.GetPointXY(point3d, 1800.0, 150.0), array2, 300.0, -2.0, "");
Class36.smethod_21(CAD.GetPointXY(point3d, 4200.0, 150.0), array3, 300.0, -2.0);
if (this.CheckBox1.Checked)
{
Class36.smethod_20(CAD.GetPointXY(point3d, 4800.0, 150.0), array4, 300.0, -2.0, "");
}
if (this.CheckBox1.Checked)
{
Class36.smethod_20(CAD.GetPointXY(point3d, 6300.0, 150.0), array5, 300.0, -2.0, "");
}
if (this.CheckBox1.Checked)
{
num2 = 3750L;
}
else
{
num2 = 2500L;
}
point3d = CAD.GetPointXY(point3d, (double)num2, -1500.0);
Class36.smethod_24(point3d, "结构层高表", 500.0, 0, "");
point3d = CAD.GetPointXY(point3d, 0.0, -750.0);
Class36.smethod_24(point3d, "注:标高均为楼面结构标高", 350.0, 0, "");
Point3d[] array6 = new Point3d[]
{
CAD.GetPointXY(point3d, -1500.0, 600.0),
CAD.GetPointXY(point3d, 1500.0, 600.0)
};
CAD.AddPline(array6, 75.0, false, "");
CAD.AddLine(CAD.GetPointAngle(array6[0], 125.0, -90.0), CAD.GetPointAngle(array6[1], 125.0, -90.0), "0");
documentLock.Dispose();
}
}
}
