public static MetrischeGewindegroesse getMetrischegewindegroesse()
{
//AB HIER GEWINDEGRÖßE
Boolean gueltig;
MetrischeGewindegroesse g = null; // initialisierung, ein NULL-Wert wird zugewiesen, damit er was hat / siehe MetrischeGewindegroesse.cs
do
{
gueltig = true;
try //Siehe kommentar bei catch
{
Console.WriteLine("Geben Sie die gewünschte Gewindegröße ein");
float input = (float)Convert.ToDouble(Console.ReadLine()); //Float wird verwendet, weil weniger Speicherplatz als double / EInklammerung forciert den double einen FLoat zu werden
g = MassTabelle.getMetrischeGewindeG(input); //siehe Masstabelle.cs
if (g == null)
{
Console.WriteLine("Nicht vorhanden"); //Wenn die eingegebene größe nicht gefunden wird, wird "null" returned und folgende ausgabe getätigt
gueltig = false;
}
else
{
string s = g.printGewinde(); //Ausgabe der technischen Daten des gewählten Gewindes
Console.WriteLine(s);
}
}
catch (Exception) //(sinngemäß: testen und verarbeiten) rahmt einen Block von Anweisungen (try statements) ein und legt Reaktionen (catch statementes) fest, die im Fehlerfall ausgeführt werden.
{ //Wenn anstatt einer Zahl ein Buchstabe eingegeben wird, würde das Programm abstürzen. Durch try und catch wird der Fall abgefangen und folgendes ausgeführt:
Console.WriteLine("Bitte geben Sie nur eine Zahl ein (kein M)");
gueltig = false;
}
} while (!gueltig);
return(g); //gibt die Gewindegröße g zurück
}
// Fase am Ende des Schraubenschaftes
public void ErzeugeFase(MetrischeGewindegroesse m)
{
hsp_catiaPart.Part.InWorkObject = hsp_catiaPart.Part.MainBody;
ShapeFactory catshapeFactoryFase = (ShapeFactory)hsp_catiaPart.Part.ShapeFactory;
Reference reference1 = hsp_catiaPart.Part.CreateReferenceFromBRepName(
"REdge:(Edge:(Face:(Brp:(Pad.1;0:(Brp:(Sketch.1;1)));None:();Cf11:());Face:(Brp:(Pad.1;2);None:();Cf11:());None:(Limits1:();Limits2:());Cf11:());WithTemporaryBody;WithoutBuildError;WithSelectingFeatureSupport;MFBRepVersion_CXR15)", SchaftPad);
SchaftFase = catshapeFactoryFase.AddNewChamfer(reference1, CatChamferPropagation.catTangencyChamfer, CatChamferMode.catLengthAngleChamfer, CatChamferOrientation.catNoReverseChamfer, m.fase, 45);
SchaftFase.set_Name("Fase");
hsp_catiaPart.Part.Update();
}
public void ErzeugeKopf(MetrischeGewindegroesse m, String sk)
{
//sk = "Zylinderkopf mit Schlitz"; //Test mit Sechskant
if (sk == "Sechskant")
{
Sechskant(m);
}
else if (sk == "Zylinderkopf mit Schlitz")
{
ZylinderkopfSchlitz(m);
}
else if (sk == "Senkkopf mit Torx")
{
Senkkopf(m);
}
else if (sk == "Linsenkopf mit Kreuz-Schlitz")
{
ZylinderkopfInnensechskant(m);
}
}
public Gewindelaenge(Schaftlaenge s, MetrischeGewindegroesse m) //neues Objekt Gewindelänge
{
minGewindeLaenge = minGewindeLaengeRechnung(m.mutterhoehe);
maxGewindeLaenge = maxGewindeLaengeRechnung(s.schaftlaenge);
gewindeLaenge = maxGewindeLaenge;
}
public readonly float maxSchaftlaenge = 200; //Maximale Länge, würde ich einfach vorgeben //Kann nicht überschrieben werden
public Schaftlaenge(MetrischeGewindegroesse m) //Schaftlänge mit der information des gewählten Gewindes wird konstruiert
{
minSchaftlaenge = MinSchaftlaengeRechnung(m.mutterhoehe); //Berechnung der minimalen Schaftlänge (Unterprogramm ist weiter unten)
schaftlaenge = minSchaftlaenge; //Schaftlänge wird auf minSchaftlänge gesetzt um mögliche KOnflikte vorzubeugen, falls schaftlänge keinen WErt hätte
}
public void Senkkopf(MetrischeGewindegroesse m)
{
#region SKizze bauen
// neue Skizze im ausgewaehlten geometrischen Set anlegen
Sketches catSketches1 = catHybridBody1.HybridSketches;
OriginElements catOriginElements = hsp_catiaPart.Part.OriginElements;
Reference catReference1 = (Reference)catOriginElements.PlaneZX;
hsp_catiaProfil = catSketches1.Add(catReference1);
// Achsensystem in Skizze erstellen
ErzeugeAchsensystem();
hsp_catiaProfil.set_Name("Senkkopf");
// Skizzierer verlassen
hsp_catiaProfil.CloseEdition();
// Part aktualisieren
hsp_catiaPart.Part.Update();
Factory2D catFactory2D1 = hsp_catiaProfil.OpenEdition();
#endregion
#region Profil
double tan45 = 1;
double tan30 = Math.Sqrt(3) / 3;
double winkel;
if (m.bezeichnung <= 20)
{
winkel = tan45;
}
else
{
winkel = tan30;
}
double HoeheP4 = ((m.innenskkopfdurchmesser / 2) - (m.bezeichnung / 2)) / winkel;
// erst die Punkte
Point2D catPoint2D1 = catFactory2D1.CreatePoint(0, 0);
Point2D catPoint2D2 = catFactory2D1.CreatePoint(m.innenskkopfhöhe, 0);
Point2D catPoint2D3 = catFactory2D1.CreatePoint(m.innenskkopfhöhe, m.innenskkopfdurchmesser / 2);
Point2D catPoint2D4 = catFactory2D1.CreatePoint(HoeheP4, m.innenskkopfdurchmesser / 2);
Point2D catPoint2D5 = catFactory2D1.CreatePoint(0, m.bezeichnung / 2);
// dann das Profil
Line2D catLine2D1 = catFactory2D1.CreateLine(0, 0, m.innenskkopfhöhe, 0);
catLine2D1.StartPoint = catPoint2D1;
catLine2D1.EndPoint = catPoint2D2;
Line2D catLine2D2 = catFactory2D1.CreateLine(m.innenskkopfhöhe, 0, m.innenskkopfhöhe, m.innenskkopfdurchmesser / 2);
catLine2D2.StartPoint = catPoint2D2;
catLine2D2.EndPoint = catPoint2D3;
Line2D catLine2D3 = catFactory2D1.CreateLine(m.innenskkopfhöhe, m.innenskkopfdurchmesser / 2, HoeheP4, m.innenskkopfdurchmesser / 2);
catLine2D3.StartPoint = catPoint2D3;
catLine2D3.EndPoint = catPoint2D4;
Line2D catLine2D4 = catFactory2D1.CreateLine(HoeheP4, m.innenskkopfdurchmesser / 2, 0, m.bezeichnung / 2);
catLine2D4.StartPoint = catPoint2D4;
catLine2D4.EndPoint = catPoint2D5;
Line2D catLine2D5 = catFactory2D1.CreateLine(0, m.bezeichnung / 2, 0, 0);
catLine2D5.StartPoint = catPoint2D5;
catLine2D5.EndPoint = catPoint2D1;
Point2D AxisPoint1 = catFactory2D1.CreatePoint(0, 0);
Point2D AxisPoint2 = catFactory2D1.CreatePoint(m.innenskkopfhöhe, 0);
Line2D AxisLine1 = catFactory2D1.CreateLine(0, 0, m.innenskkopfhöhe, 0);
AxisLine1.StartPoint = AxisPoint1;
AxisLine1.EndPoint = AxisPoint2;
Reference Axisreference1 = hsp_catiaPart.Part.CreateReferenceFromObject(AxisPoint1);
GeometricElements geometricElements1 = hsp_catiaProfil.GeometricElements;
Axis2D catAxis2D1 = (Axis2D)geometricElements1.Item("Absolute Achse");
Line2D AxisLine2 = (Line2D)catAxis2D1.GetItem("H-Richtung");
Reference Axisreference2 = hsp_catiaPart.Part.CreateReferenceFromObject(AxisLine2);
Constraints constraints1 = hsp_catiaProfil.Constraints;
Constraint constraint1 = constraints1.AddBiEltCst(CatConstraintType.catCstTypeOn, Axisreference1, Axisreference2);
constraint1.Mode = CatConstraintMode.catCstModeDrivingDimension;
Reference Axisreference3 = hsp_catiaPart.Part.CreateReferenceFromObject(AxisLine1);
Reference Axisreference4 = hsp_catiaPart.Part.CreateReferenceFromObject(AxisLine2);
Constraint constraint2 = constraints1.AddBiEltCst(CatConstraintType.catCstTypeVerticality, Axisreference3, Axisreference4);
constraint2.Mode = CatConstraintMode.catCstModeDrivingDimension;
hsp_catiaProfil.CenterLine = AxisLine1;
// Skizzierer verlassen
hsp_catiaProfil.CloseEdition();
// Part aktualisieren
hsp_catiaPart.Part.Update();
#endregion
#region Shaft
hsp_catiaPart.Part.InWorkObject = hsp_catiaPart.Part.MainBody;
ShapeFactory catShapeFactory1 = (ShapeFactory)hsp_catiaPart.Part.ShapeFactory;
Reference reference1 = hsp_catiaPart.Part.CreateReferenceFromObject(hsp_catiaProfil);
SenkkopfShaft = catShapeFactory1.AddNewShaftFromRef(reference1);
SenkkopfShaft.SetProfileElement(reference1);
SenkkopfShaft.set_Name("Kopf");
// Part aktualisieren
hsp_catiaPart.Part.Update();
#endregion
#region Offsetebene
Reference RefmyPlaneYZ = (Reference)catOriginElements.PlaneYZ;
hsp_catiaPart.Part.InWorkObject = hsp_catiaPart.Part;
HybridShapeFactory hybridShapeFactory1 = (HybridShapeFactory)hsp_catiaPart.Part.HybridShapeFactory;
HybridShapePlaneOffset OffsetEbene = hybridShapeFactory1.AddNewPlaneOffset(RefmyPlaneYZ, m.innenskkopfhöhe, true);
OffsetEbene.set_Name("OffsetEbene");
Reference RefOffsetEbene = hsp_catiaPart.Part.CreateReferenceFromObject(OffsetEbene);
HybridBodies hybridBodies1 = hsp_catiaPart.Part.HybridBodies;
HybridBody hybridBody1 = hybridBodies1.Item("Profile");
hybridBody1.AppendHybridShape(OffsetEbene);
hsp_catiaPart.Part.Update();
Sketches catSketches2 = catHybridBody1.HybridSketches;
Sketch SkizzeaufOffset = catSketches2.Add(RefOffsetEbene);
hsp_catiaPart.Part.InWorkObject = SkizzeaufOffset;
SkizzeaufOffset.set_Name("OffsetSkizze");
// Achsensystem in Skizze erstellen
ErzeugeAchsensystem();
// Skizzierer verlassen
SkizzeaufOffset.CloseEdition();
// Part aktualisieren
hsp_catiaPart.Part.Update();
#endregion
#region Innensechskant
Factory2D catFactory2D2 = SkizzeaufOffset.OpenEdition();
// Sechskant erzeugen
double cos30 = Math.Sqrt(3) / 2;
double mSW = m.innensechskant / 2;
// erst die Punkte
Point2D catPoint2D6 = catFactory2D2.CreatePoint(mSW, tan30 * mSW);
Point2D catPoint2D7 = catFactory2D2.CreatePoint(mSW, -(tan30 * mSW));
Point2D catPoint2D8 = catFactory2D2.CreatePoint(0, -(mSW / cos30));
Point2D catPoint2D9 = catFactory2D2.CreatePoint(-mSW, -(tan30 * mSW));
Point2D catPoint2D10 = catFactory2D2.CreatePoint(-mSW, tan30 * mSW);
Point2D catPoint2D11 = catFactory2D2.CreatePoint(0, mSW / cos30);
// dann die Linien
Line2D catLine2D6 = catFactory2D2.CreateLine(mSW, tan30 * mSW, mSW, -(tan30 * mSW));
catLine2D6.StartPoint = catPoint2D6;
catLine2D6.EndPoint = catPoint2D7;
Line2D catLine2D7 = catFactory2D2.CreateLine(mSW, -(tan30 * mSW), 0, -(mSW / cos30));
catLine2D7.StartPoint = catPoint2D7;
catLine2D7.EndPoint = catPoint2D8;
Line2D catLine2D8 = catFactory2D2.CreateLine(0, -(mSW / cos30), -mSW, -(tan30 * mSW));
catLine2D8.StartPoint = catPoint2D8;
catLine2D8.EndPoint = catPoint2D9;
Line2D catLine2D9 = catFactory2D2.CreateLine(-mSW, -(tan30 * mSW), -mSW, (tan30 * mSW));
catLine2D9.StartPoint = catPoint2D9;
catLine2D9.EndPoint = catPoint2D10;
Line2D catLine2D10 = catFactory2D2.CreateLine(-mSW, (tan30 * mSW), 0, mSW / cos30);
catLine2D10.StartPoint = catPoint2D10;
catLine2D10.EndPoint = catPoint2D11;
Line2D catLine2D11 = catFactory2D2.CreateLine(0, mSW / cos30, mSW, tan30 * mSW);
catLine2D11.StartPoint = catPoint2D11;
catLine2D11.EndPoint = catPoint2D6;
// Part aktualisieren
hsp_catiaPart.Part.Update();
#endregion
#region Tasche Innensechskant
// Hauptkoerper in Bearbeitung definieren
hsp_catiaPart.Part.InWorkObject = hsp_catiaPart.Part.MainBody;
// Tasche erzeugen erzeugen
ShapeFactory catShapeFactory2 = (ShapeFactory)hsp_catiaPart.Part.ShapeFactory;
SchlitzPocket = catShapeFactory2.AddNewPocket(SkizzeaufOffset, -m.schlitztiefe);
// Block umbenennen
SchlitzPocket.set_Name("Innensechskannt");
// Part aktualisieren
hsp_catiaPart.Part.Update();
#endregion
}
public void ZylinderkopfInnensechskant(MetrischeGewindegroesse m)
{
#region SKizze bauen
// neue Skizze im ausgewaehlten geometrischen Set anlegen
Sketches catSketches1 = catHybridBody1.HybridSketches;
OriginElements catOriginElements = hsp_catiaPart.Part.OriginElements;
Reference catReference1 = (Reference)catOriginElements.PlaneYZ;
hsp_catiaProfil = catSketches1.Add(catReference1);
// Achsensystem in Skizze erstellen
ErzeugeAchsensystem();
hsp_catiaProfil.set_Name("Zylinderkopf mit Innensechskannt");
// Skizzierer verlassen
hsp_catiaProfil.CloseEdition();
// Part aktualisieren
hsp_catiaPart.Part.Update();
Factory2D catFactory2D1 = hsp_catiaProfil.OpenEdition();
// erst die Punkte
Point2D catPoint2D1 = catFactory2D1.CreatePoint(0, 0);
// dann den Kreis
Circle2D catCircle2D_1 = catFactory2D1.CreateCircle(0, 0, m.kopfdurchmesser / 2, 0, 0);
catCircle2D_1.CenterPoint = catPoint2D1;
// Skizzierer verlassen
hsp_catiaProfil.CloseEdition();
// Part aktualisieren
hsp_catiaPart.Part.Update();
#endregion
#region Pad
// Hauptkoerper in Bearbeitung definieren
hsp_catiaPart.Part.InWorkObject = hsp_catiaPart.Part.MainBody;
// Block(Schaft) erzeugen
ShapeFactory catShapeFactory1 = (ShapeFactory)hsp_catiaPart.Part.ShapeFactory;
KopfPad = catShapeFactory1.AddNewPad(hsp_catiaProfil, -m.mutterhoehe);
// Block umbenennen
KopfPad.set_Name("Kopf");
// Part aktualisieren
hsp_catiaPart.Part.Update();
#endregion
#region Offsetebene
Reference RefmyPlaneYZ = (Reference)catOriginElements.PlaneYZ;
hsp_catiaPart.Part.InWorkObject = hsp_catiaPart.Part;
HybridShapeFactory hybridShapeFactory1 = (HybridShapeFactory)hsp_catiaPart.Part.HybridShapeFactory;
HybridShapePlaneOffset OffsetEbene = hybridShapeFactory1.AddNewPlaneOffset(RefmyPlaneYZ, m.mutterhoehe, true);
OffsetEbene.set_Name("OffsetEbene");
Reference RefOffsetEbene = hsp_catiaPart.Part.CreateReferenceFromObject(OffsetEbene);
HybridBodies hybridBodies1 = hsp_catiaPart.Part.HybridBodies;
HybridBody hybridBody1 = hybridBodies1.Item("Profile");
hybridBody1.AppendHybridShape(OffsetEbene);
hsp_catiaPart.Part.Update();
Sketches catSketches2 = catHybridBody1.HybridSketches;
Sketch SkizzeaufOffset = catSketches2.Add(RefOffsetEbene);
hsp_catiaPart.Part.InWorkObject = SkizzeaufOffset;
SkizzeaufOffset.set_Name("OffsetSkizze");
// Achsensystem in Skizze erstellen
ErzeugeAchsensystem();
// Skizzierer verlassen
SkizzeaufOffset.CloseEdition();
// Part aktualisieren
hsp_catiaPart.Part.Update();
#endregion
#region Innensechskannt
Factory2D catFactory2D2 = SkizzeaufOffset.OpenEdition();
// Sechskant erzeugen
double tan30 = Math.Sqrt(3) / 3;
double cos30 = Math.Sqrt(3) / 2;
double mSW = m.innensechskant / 2;
// erst die Punkte
Point2D catPoint2D2 = catFactory2D2.CreatePoint(mSW, tan30 * mSW);
Point2D catPoint2D3 = catFactory2D2.CreatePoint(mSW, -(tan30 * mSW));
Point2D catPoint2D4 = catFactory2D2.CreatePoint(0, -(mSW / cos30));
Point2D catPoint2D5 = catFactory2D2.CreatePoint(-mSW, -(tan30 * mSW));
Point2D catPoint2D6 = catFactory2D2.CreatePoint(-mSW, tan30 * mSW);
Point2D catPoint2D7 = catFactory2D2.CreatePoint(0, mSW / cos30);
// dann die Linien
Line2D catLine2D1 = catFactory2D2.CreateLine(mSW, tan30 * mSW, mSW, -(tan30 * mSW));
catLine2D1.StartPoint = catPoint2D2;
catLine2D1.EndPoint = catPoint2D3;
Line2D catLine2D2 = catFactory2D2.CreateLine(mSW, -(tan30 * mSW), 0, -(mSW / cos30));
catLine2D2.StartPoint = catPoint2D3;
catLine2D2.EndPoint = catPoint2D4;
Line2D catLine2D3 = catFactory2D2.CreateLine(0, -(mSW / cos30), -mSW, -(tan30 * mSW));
catLine2D3.StartPoint = catPoint2D4;
catLine2D3.EndPoint = catPoint2D5;
Line2D catLine2D4 = catFactory2D2.CreateLine(-mSW, -(tan30 * mSW), -mSW, (tan30 * mSW));
catLine2D4.StartPoint = catPoint2D5;
catLine2D4.EndPoint = catPoint2D6;
Line2D catLine2D5 = catFactory2D2.CreateLine(-mSW, (tan30 * mSW), 0, mSW / cos30);
catLine2D5.StartPoint = catPoint2D6;
catLine2D5.EndPoint = catPoint2D7;
Line2D catLine2D6 = catFactory2D2.CreateLine(0, mSW / cos30, mSW, tan30 * mSW);
catLine2D6.StartPoint = catPoint2D7;
catLine2D6.EndPoint = catPoint2D2;
// Part aktualisieren
hsp_catiaPart.Part.Update();
#endregion
#region Verrundung
hsp_catiaPart.Part.InWorkObject = hsp_catiaPart.Part.MainBody;
ShapeFactory catshapeFactoryRadius = (ShapeFactory)hsp_catiaPart.Part.ShapeFactory;
Reference reference1 = hsp_catiaPart.Part.CreateReferenceFromBRepName( //Hier scheint der Fehler drin zu stecken, er erkennt nicht die richtige kante--wenn nicht die Kante, sondern die Fläche ausgewählt wird, scheint der Fehler behpoben zu sein
"RSur:(Face:(Brp:(Pad.2;2);None:();Cf11:());WithTemporaryBody;WithoutBuildError;WithSelectingFeatureSupport;MFBRepVersion_CXR15)", KopfPad);
// "REdge:(Edge:(Face:(Brp:(Pad.1;0:(Brp:(Sketch.1;1)));None:();Cf11:());Face:(Brp:(Pad.1;2);None:();Cf11:());None:(Limits1:();Limits2:());Cf11:());WithTemporaryBody;WithoutBuildError;WithSelectingFeatureSupport;MFBRepVersion_CXR15)", SchaftPad);
RadiusKopf = catshapeFactoryRadius.AddNewEdgeFilletWithConstantRadius(reference1, CatFilletEdgePropagation.catTangencyFilletEdgePropagation, m.fase);
RadiusKopf.set_Name("Radius");
hsp_catiaPart.Part.Update();
#endregion
#region Tasche Innensechskannt
// Hauptkoerper in Bearbeitung definieren
hsp_catiaPart.Part.InWorkObject = hsp_catiaPart.Part.MainBody;
// Tasche erzeugen erzeugen
ShapeFactory catShapeFactory2 = (ShapeFactory)hsp_catiaPart.Part.ShapeFactory;
SchlitzPocket = catShapeFactory2.AddNewPocket(SkizzeaufOffset, -m.innensktiefe);
// Block umbenennen
SchlitzPocket.set_Name("Innensechskant");
// Part aktualisieren
hsp_catiaPart.Part.Update();
#endregion
}
public void Sechskantverrundung(MetrischeGewindegroesse m)
{
#region SKizze bauen
// neue Skizze im ausgewaehlten geometrischen Set anlegen
Sketches catSketches1 = catHybridBody1.HybridSketches;
OriginElements catOriginElements = hsp_catiaPart.Part.OriginElements;
Reference catReference1 = (Reference)catOriginElements.PlaneZX;
hsp_catiaProfil = catSketches1.Add(catReference1);
// Achsensystem in Skizze erstellen
ErzeugeAchsensystem();
hsp_catiaProfil.set_Name("Kopffase");
// Skizzierer verlassen
hsp_catiaProfil.CloseEdition();
// Part aktualisieren
hsp_catiaPart.Part.Update();
Factory2D catFactory2D1 = hsp_catiaProfil.OpenEdition();
#endregion
#region Profil zeichnen
double tan30 = Math.Sqrt(3) / 3;
double cos30 = Math.Sqrt(3) / 2;
double mSW = (m.schluesselweite / 2);
double Breite = (mSW / cos30);
Point2D catPoint2D1 = catFactory2D1.CreatePoint(m.kopfhoehesechs, mSW * 0.95);
Point2D catPoint2D2 = catFactory2D1.CreatePoint(m.kopfhoehesechs, Breite);
Point2D catPoint2D3 = catFactory2D1.CreatePoint(m.kopfhoehesechs - (tan30 * (Breite - mSW)), Breite);
Line2D catLine2D1 = catFactory2D1.CreateLine(m.kopfhoehesechs, mSW * 0.95, m.kopfhoehesechs, Breite);
catLine2D1.StartPoint = catPoint2D1;
catLine2D1.EndPoint = catPoint2D2;
Line2D catLine2D2 = catFactory2D1.CreateLine(m.kopfhoehesechs, Breite, m.kopfhoehesechs - (tan30 * (Breite - mSW)), Breite);
catLine2D2.StartPoint = catPoint2D2;
catLine2D2.EndPoint = catPoint2D3;
Line2D catLine2D3 = catFactory2D1.CreateLine(m.kopfhoehesechs - (tan30 * (Breite - mSW)), Breite, m.kopfhoehesechs, mSW * 0.95);
catLine2D3.StartPoint = catPoint2D3;
catLine2D3.EndPoint = catPoint2D1;
Point2D AxisPoint1 = catFactory2D1.CreatePoint(0, 0);
Point2D AxisPoint2 = catFactory2D1.CreatePoint(m.kopfhoehesechs, 0);
Line2D AxisLine1 = catFactory2D1.CreateLine(0, 0, m.kopfhoehesechs, 0);
AxisLine1.StartPoint = AxisPoint1;
AxisLine1.EndPoint = AxisPoint2;
Reference Axisreference1 = hsp_catiaPart.Part.CreateReferenceFromObject(AxisPoint1);
GeometricElements geometricElements1 = hsp_catiaProfil.GeometricElements;
Axis2D catAxis2D1 = (Axis2D)geometricElements1.Item("Absolute Achse");
Line2D AxisLine2 = (Line2D)catAxis2D1.GetItem("H-Richtung");
Reference Axisreference2 = hsp_catiaPart.Part.CreateReferenceFromObject(AxisLine2);
Constraints constraints1 = hsp_catiaProfil.Constraints;
Constraint constraint1 = constraints1.AddBiEltCst(CatConstraintType.catCstTypeOn, Axisreference1, Axisreference2);
constraint1.Mode = CatConstraintMode.catCstModeDrivingDimension;
Reference Axisreference3 = hsp_catiaPart.Part.CreateReferenceFromObject(AxisLine1);
Reference Axisreference4 = hsp_catiaPart.Part.CreateReferenceFromObject(AxisLine2);
Constraint constraint2 = constraints1.AddBiEltCst(CatConstraintType.catCstTypeVerticality, Axisreference3, Axisreference4);
constraint2.Mode = CatConstraintMode.catCstModeDrivingDimension;
hsp_catiaProfil.CenterLine = AxisLine1;
// Skizzierer verlassen
hsp_catiaProfil.CloseEdition();
// Part aktualisieren
hsp_catiaPart.Part.Update();
#endregion
#region Nut
hsp_catiaPart.Part.InWorkObject = hsp_catiaPart.Part.MainBody;
ShapeFactory catShapeFactory1 = (ShapeFactory)hsp_catiaPart.Part.ShapeFactory;
Reference reference1 = hsp_catiaPart.Part.CreateReferenceFromObject(hsp_catiaProfil);
SechskantGroove = catShapeFactory1.AddNewGrooveFromRef(reference1);
SechskantGroove.SetProfileElement(reference1);
SechskantGroove.set_Name("Kopfnut");
// Part aktualisieren
hsp_catiaPart.Part.Update();
#endregion
}
public void Sechskant(MetrischeGewindegroesse m)
{
#region SKizze bauen
// neue Skizze im ausgewaehlten geometrischen Set anlegen
Sketches catSketches1 = catHybridBody1.HybridSketches;
OriginElements catOriginElements = hsp_catiaPart.Part.OriginElements;
Reference catReference1 = (Reference)catOriginElements.PlaneYZ;
hsp_catiaProfil = catSketches1.Add(catReference1);
// Achsensystem in Skizze erstellen
ErzeugeAchsensystem();
hsp_catiaProfil.set_Name("Sechskantkopf");
// Skizzierer verlassen
hsp_catiaProfil.CloseEdition();
// Part aktualisieren
hsp_catiaPart.Part.Update();
Factory2D catFactory2D1 = hsp_catiaProfil.OpenEdition();
// Sechskant erzeugen
double tan30 = Math.Sqrt(3) / 3;
double cos30 = Math.Sqrt(3) / 2;
double mSW = m.schluesselweite / 2;
//double mSW = 16; //Test mit Schlüsselweite 16
// erst die Punkte
Point2D catPoint2D1 = catFactory2D1.CreatePoint(mSW, tan30 * mSW);
Point2D catPoint2D2 = catFactory2D1.CreatePoint(mSW, -(tan30 * mSW));
Point2D catPoint2D3 = catFactory2D1.CreatePoint(0, -(mSW / cos30));
Point2D catPoint2D4 = catFactory2D1.CreatePoint(-mSW, -(tan30 * mSW));
Point2D catPoint2D5 = catFactory2D1.CreatePoint(-mSW, tan30 * mSW);
Point2D catPoint2D6 = catFactory2D1.CreatePoint(0, mSW / cos30);
// dann die Linien
Line2D catLine2D1 = catFactory2D1.CreateLine(mSW, tan30 * mSW, mSW, -(tan30 * mSW));
catLine2D1.StartPoint = catPoint2D1;
catLine2D1.EndPoint = catPoint2D2;
Line2D catLine2D2 = catFactory2D1.CreateLine(mSW, -(tan30 * mSW), 0, -(mSW / cos30));
catLine2D2.StartPoint = catPoint2D2;
catLine2D2.EndPoint = catPoint2D3;
Line2D catLine2D3 = catFactory2D1.CreateLine(0, -(mSW / cos30), -mSW, -(tan30 * mSW));
catLine2D3.StartPoint = catPoint2D3;
catLine2D3.EndPoint = catPoint2D4;
Line2D catLine2D4 = catFactory2D1.CreateLine(-mSW, -(tan30 * mSW), -mSW, (tan30 * mSW));
catLine2D4.StartPoint = catPoint2D4;
catLine2D4.EndPoint = catPoint2D5;
Line2D catLine2D5 = catFactory2D1.CreateLine(-mSW, (tan30 * mSW), 0, mSW / cos30);
catLine2D5.StartPoint = catPoint2D5;
catLine2D5.EndPoint = catPoint2D6;
Line2D catLine2D6 = catFactory2D1.CreateLine(0, mSW / cos30, mSW, tan30 * mSW);
catLine2D6.StartPoint = catPoint2D6;
catLine2D6.EndPoint = catPoint2D1;
// Part aktualisieren
hsp_catiaPart.Part.Update();
#endregion
#region Pad
// Hauptkoerper in Bearbeitung definieren
hsp_catiaPart.Part.InWorkObject = hsp_catiaPart.Part.MainBody;
// Block(Balken) erzeugen
ShapeFactory catShapeFactory2 = (ShapeFactory)hsp_catiaPart.Part.ShapeFactory;
KopfPad = catShapeFactory2.AddNewPad(hsp_catiaProfil, -m.kopfhoehesechs);
//Pad catPad2 = catShapeFactory2.AddNewPad(hsp_catiaProfil, -12); // Test mit Mutterhoehe 12
// Block umbenennen
KopfPad.set_Name("Kopf");
// Part aktualisieren
hsp_catiaPart.Part.Update();
#endregion
Sechskantverrundung(m);
}
