// If called with no mapInfo for the terrain, this will create a new mapInfo and terrain
// based on the passed information. The 'id' should be either the terrain id or
// BSScene.CHILDTERRAIN_ID. If the latter, a new child terrain ID will be allocated and used.
// The latter feature is for creating child terrains for mega-regions.
// If called with a mapInfo in m_heightMaps but the terrain has no body yet (mapInfo.terrainBody.Ptr == 0)
// then a new body and shape is created and the mapInfo is filled.
// This call is used for doing the initial terrain creation.
// If called with a mapInfo in m_heightMaps and there is an existing terrain body, a new
// terrain shape is created and added to the body.
// This call is most often used to update the heightMap and parameters of the terrain.
// The 'doNow' boolean says whether to do all the unmanaged activities right now (like when
// calling this routine from initialization or taint-time routines) or whether to delay
// all the unmanaged activities to taint-time.
private void UpdateOrCreateTerrain(uint id, float[] heightMap, Vector3 minCoords, Vector3 maxCoords, bool atTaintTime)
{
DetailLog("{0},BSTerrainManager.UpdateOrCreateTerrain,call,minC={1},maxC={2},atTaintTime={3}",
BSScene.DetailLogZero, minCoords, maxCoords, atTaintTime);
float minZ = float.MaxValue;
float maxZ = float.MinValue;
Vector2 terrainRegionBase = new Vector2(minCoords.X, minCoords.Y);
int heightMapSize = heightMap.Length;
for (int ii = 0; ii < heightMapSize; ii++)
{
float height = heightMap[ii];
if (height < minZ)
{
minZ = height;
}
if (height > maxZ)
{
maxZ = height;
}
}
// The shape of the terrain is from its base to its extents.
minCoords.Z = minZ;
maxCoords.Z = maxZ;
BulletHeightMapInfo mapInfo;
if (m_heightMaps.TryGetValue(terrainRegionBase, out mapInfo))
{
// If this is terrain we know about, it's easy to update
mapInfo.heightMap = heightMap;
mapInfo.minCoords = minCoords;
mapInfo.maxCoords = maxCoords;
mapInfo.minZ = minZ;
mapInfo.maxZ = maxZ;
mapInfo.sizeX = maxCoords.X - minCoords.X;
mapInfo.sizeY = maxCoords.Y - minCoords.Y;
DetailLog("{0},UpdateOrCreateTerrain:UpdateExisting,call,terrainBase={1},minC={2}, maxC={3}, szX={4}, szY={5}",
BSScene.DetailLogZero, terrainRegionBase, mapInfo.minCoords, mapInfo.maxCoords, mapInfo.sizeX, mapInfo.sizeY);
BSScene.TaintCallback rebuildOperation = delegate()
{
if (MegaRegionParentPhysicsScene != null)
{
// It's possible that Combine() was called after this code was queued.
// If we are a child of combined regions, we don't create any terrain for us.
DetailLog("{0},UpdateOrCreateTerrain:AmACombineChild,taint", BSScene.DetailLogZero);
// Get rid of any terrain that may have been allocated for us.
ReleaseGroundPlaneAndTerrain();
// I hate doing this, but just bail
return;
}
if (mapInfo.terrainBody.ptr != IntPtr.Zero)
{
// Updating an existing terrain.
DetailLog("{0},UpdateOrCreateTerrain:UpdateExisting,taint,terrainBase={1},minC={2}, maxC={3}, szX={4}, szY={5}",
BSScene.DetailLogZero, terrainRegionBase, mapInfo.minCoords, mapInfo.maxCoords, mapInfo.sizeX, mapInfo.sizeY);
// Remove from the dynamics world because we're going to mangle this object
BulletSimAPI.RemoveObjectFromWorld2(PhysicsScene.World.ptr, mapInfo.terrainBody.ptr);
// Get rid of the old terrain
BulletSimAPI.DestroyObject2(PhysicsScene.World.ptr, mapInfo.terrainBody.ptr);
BulletSimAPI.ReleaseHeightMapInfo2(mapInfo.Ptr);
mapInfo.Ptr = IntPtr.Zero;
/*
* // NOTE: This routine is half here because I can't get the terrain shape replacement
* // to work. In the short term, the above three lines completely delete the old
* // terrain and the code below recreates one from scratch.
* // Hopefully the Bullet community will help me out on this one.
*
* // First, release the old collision shape (there is only one terrain)
* BulletSimAPI.DeleteCollisionShape2(m_physicsScene.World.Ptr, mapInfo.terrainShape.Ptr);
*
* // Fill the existing height map info with the new location and size information
* BulletSimAPI.FillHeightMapInfo2(m_physicsScene.World.Ptr, mapInfo.Ptr, mapInfo.ID,
* mapInfo.minCoords, mapInfo.maxCoords, mapInfo.heightMap, TERRAIN_COLLISION_MARGIN);
*
* // Create a terrain shape based on the new info
* mapInfo.terrainShape = new BulletShape(BulletSimAPI.CreateTerrainShape2(mapInfo.Ptr));
*
* // Stuff the shape into the existing terrain body
* BulletSimAPI.SetBodyShape2(m_physicsScene.World.Ptr, mapInfo.terrainBody.Ptr, mapInfo.terrainShape.Ptr);
*/
}
// else
{
// Creating a new terrain.
DetailLog("{0},UpdateOrCreateTerrain:CreateNewTerrain,taint,baseX={1},baseY={2},minZ={3},maxZ={4}",
BSScene.DetailLogZero, mapInfo.minCoords.X, mapInfo.minCoords.Y, minZ, maxZ);
mapInfo.ID = id;
mapInfo.Ptr = BulletSimAPI.CreateHeightMapInfo2(PhysicsScene.World.ptr, mapInfo.ID,
mapInfo.minCoords, mapInfo.maxCoords, mapInfo.heightMap, TERRAIN_COLLISION_MARGIN);
// The terrain object initial position is at the center of the object
Vector3 centerPos;
centerPos.X = minCoords.X + (mapInfo.sizeX / 2f);
centerPos.Y = minCoords.Y + (mapInfo.sizeY / 2f);
centerPos.Z = minZ + ((maxZ - minZ) / 2f);
// Create the terrain shape from the mapInfo
mapInfo.terrainShape = new BulletShape(BulletSimAPI.CreateTerrainShape2(mapInfo.Ptr),
ShapeData.PhysicsShapeType.SHAPE_TERRAIN);
mapInfo.terrainBody = new BulletBody(mapInfo.ID,
BulletSimAPI.CreateBodyWithDefaultMotionState2(mapInfo.terrainShape.ptr,
id, centerPos, Quaternion.Identity));
}
// Make sure the entry is in the heightmap table
m_heightMaps[terrainRegionBase] = mapInfo;
// Set current terrain attributes
BulletSimAPI.SetFriction2(mapInfo.terrainBody.ptr, PhysicsScene.Params.terrainFriction);
BulletSimAPI.SetHitFraction2(mapInfo.terrainBody.ptr, PhysicsScene.Params.terrainHitFraction);
BulletSimAPI.SetRestitution2(mapInfo.terrainBody.ptr, PhysicsScene.Params.terrainRestitution);
BulletSimAPI.SetCollisionFlags2(mapInfo.terrainBody.ptr, CollisionFlags.CF_STATIC_OBJECT);
BulletSimAPI.SetMassProps2(mapInfo.terrainBody.ptr, 0f, Vector3.Zero);
BulletSimAPI.UpdateInertiaTensor2(mapInfo.terrainBody.ptr);
// Return the new terrain to the world of physical objects
BulletSimAPI.AddObjectToWorld2(PhysicsScene.World.ptr, mapInfo.terrainBody.ptr);
// redo its bounding box now that it is in the world
BulletSimAPI.UpdateSingleAabb2(PhysicsScene.World.ptr, mapInfo.terrainBody.ptr);
BulletSimAPI.SetCollisionFilterMask2(mapInfo.terrainBody.ptr,
(uint)CollisionFilterGroups.TerrainFilter,
(uint)CollisionFilterGroups.TerrainMask);
// Make sure the new shape is processed.
// BulletSimAPI.Activate2(mapInfo.terrainBody.ptr, true);
BulletSimAPI.ForceActivationState2(mapInfo.terrainBody.ptr, ActivationState.DISABLE_SIMULATION);
m_terrainModified = true;
};
// There is the option to do the changes now (we're already in 'taint time'), or
// to do the Bullet operations later.
if (atTaintTime)
{
rebuildOperation();
}
else
{
PhysicsScene.TaintedObject("BSScene.UpdateOrCreateTerrain:UpdateExisting", rebuildOperation);
}
}
else
{
// We don't know about this terrain so either we are creating a new terrain or
// our mega-prim child is giving us a new terrain to add to the phys world
// if this is a child terrain, calculate a unique terrain id
uint newTerrainID = id;
if (newTerrainID >= BSScene.CHILDTERRAIN_ID)
{
newTerrainID = ++m_terrainCount;
}
float[] heightMapX = heightMap;
Vector3 minCoordsX = minCoords;
Vector3 maxCoordsX = maxCoords;
DetailLog("{0},UpdateOrCreateTerrain:NewTerrain,call,id={1}, minC={2}, maxC={3}",
BSScene.DetailLogZero, newTerrainID, minCoords, minCoords);
// Code that must happen at taint-time
BSScene.TaintCallback createOperation = delegate()
{
DetailLog("{0},UpdateOrCreateTerrain:NewTerrain,taint,baseX={1},baseY={2}", BSScene.DetailLogZero, minCoords.X, minCoords.Y);
// Create a new mapInfo that will be filled with the new info
mapInfo = new BulletHeightMapInfo(id, heightMapX,
BulletSimAPI.CreateHeightMapInfo2(PhysicsScene.World.ptr, newTerrainID,
minCoordsX, maxCoordsX, heightMapX, TERRAIN_COLLISION_MARGIN));
// Put the unfilled heightmap info into the collection of same
m_heightMaps.Add(terrainRegionBase, mapInfo);
// Build the terrain
UpdateOrCreateTerrain(newTerrainID, heightMap, minCoords, maxCoords, true);
m_terrainModified = true;
};
// If already in taint-time, just call Bullet. Otherwise queue the operations for the safe time.
if (atTaintTime)
{
createOperation();
}
else
{
PhysicsScene.TaintedObject("BSScene.UpdateOrCreateTerrain:NewTerrain", createOperation);
}
}
}