public HndzFloor(Double thickness, HndzProfile profile, HndzStorey storey = null, Double baseOffset = 0) :
this(null, profile, storey, baseOffset)
{
FloorThickness = thickness;
ExtrusionLine = new HndzLine(new Point3d(profile.Centroid.X, profile.Centroid.Y, storey.Elevation - FloorThickness + baseOffset),
new Point3d(profile.Centroid.X, profile.Centroid.Y, storey.Elevation + baseOffset));
}
public HndzStairLanding(Double thickness, HndzProfile profile, HndzStorey storey, Double finishFloorThickness, Double baseOffset = 0) :
this(null, profile, storey, baseOffset)
{
SlabThickness = thickness;
ExtrusionLine = new HndzLine(new Point3d(profile.Centroid.X, profile.Centroid.Y, storey.Elevation -
SlabThickness - finishFloorThickness + baseOffset),
new Point3d(profile.Centroid.X, profile.Centroid.Y, storey.Elevation - finishFloorThickness + baseOffset));
}
public HndzStairFlight(string name, string description, HndzStorey baseStorey, int numberOfRisers,
int numberOfTreads, double riserHeight, double treadLength, HndzProfile profile)
: base(name, description, baseStorey)
{
Profile = profile;
NumberOfRisers = numberOfRisers;
NumberOfTreads = numberOfTreads;
RiserHeight = riserHeight;
TreadLength = treadLength;
}
/// <summary>
/// Constructor takes extrusion line and base storey. To use this the building must have a storey above the current storey
/// </summary>
/// <param name="name">Beam Name</param>
/// <param name="description">Beam Description</param>
/// <param name="extrusionLine">line represents start and end point of the beam and its direction</param>
/// <param name="storey">Base Storey</param>
/// <param name="baseOffset">Base Offset from base storey Elevation value</param>
/// <param name="discipline">Discipline as Enum e.g. Arch, Structure ... etc</param>
/// <param name="profile">Beam Profile</param>
public HndzBeamStandardCase(String name, String description, HndzLine extrusionLine, HndzProfile profile, HndzStorey storey = null, Double baseOffset = 0) :
base(name, description, extrusionLine, profile, storey, baseOffset)
{
//to use this, the building must have a storey above the current storey
double beamTopElevation = this.BuildingStorey.StoreyHeight;
Point3d extStartPoint = new Point3d(extrusionLine.RhinoLine.From.X, extrusionLine.RhinoLine.From.Y, beamTopElevation);
Point3d extEndPoint = new Point3d(extrusionLine.RhinoLine.To.X, extrusionLine.RhinoLine.To.Y, beamTopElevation);
Line extLine = new Line(extStartPoint, extEndPoint);
Profile = profile;
}
public HndzOpening(string name, string description, HndzProfile profile = null, HndzLine extrusionLine = null, HndzExtrudedElement relatedProduct = null, Double baseOffset = 0) : base()
{
Name = name;
Description = description;
Profile = profile;
ExtrusionLine = extrusionLine;
RelatedProduct = relatedProduct;
BaseOffset = baseOffset;
if (RelatedProduct != null)
{
base.BuildingStorey = RelatedProduct.BuildingStorey;
}
AddToAssociatedProduct();
base.AddToAssociatedStorey();
}
public HndzFloor(HndzLine extrusionLine, HndzProfile profile, HndzStorey storey = null, Double baseOffset = 0) :
this(HndzResources.DefaultName, HndzResources.DefaultDescription, profile, extrusionLine, storey, baseOffset)
{
}
public HndzFloor(String name, String description, HndzProfile profile, HndzLine extrusionLine, HndzStorey storey = null, Double baseOffset = 0) :
base(name, description, extrusionLine, storey, baseOffset)
{
Profile = profile;
}
public HndzOpening(HndzProfile profile, HndzLine extrusionLine, HndzExtrudedElement relatedProduct = null,
Double baseOffset = 0) :
this(HndzResources.DefaultName, HndzResources.DefaultDescription, profile,
extrusionLine, relatedProduct, baseOffset)
{
}
public HndzStairLanding(String name, String description, HndzProfile profile, HndzLine extrusionLine, HndzStorey storey = null, Double baseOffset = 0) :
base(name, description, profile, extrusionLine, storey, baseOffset)
{
}
} // ana msh m7tagha
#endregion
#region Constructors
protected HndzColumn(String name, String description, HndzLine extrusionLine, HndzProfile profile, HndzStorey storey = null, Double baseOffset = 0,
HndzProductDiscipline discipline = HndzProductDiscipline.Structural) :
base(name, description, extrusionLine, profile, storey, baseOffset)
{
UnconnectedHeight = extrusionLine.RhinoLine.Length;
}
protected HndzPurlin(String name, String description, HndzLine extrusionLine, HndzProfile profile, HndzStorey storey = null,
double baseOffset = 0, Vector3d direction = default(Vector3d)) :
base(name, description, extrusionLine, profile, storey, baseOffset)
{
}
protected HndzStructuralElement(string name, string description, HndzLine extrusionLine, HndzProfile profile, HndzStorey storey = null, double baseOffset = 0) :
base(name, description, extrusionLine, storey, baseOffset, HndzProductDiscipline.Structural)
{
Profile = profile;
}
/// <summary>
/// Constructor takes extrusion line and base storey
/// </summary>
/// <param name="extrusionLine">line represents base point of the column and end point represents where column extrusion will end </param>
/// <param name="storey">Base Storey</param>
/// <param name="baseOffset">Base Offset from base storey Elevation value</param>
/// <param name="discipline">Discipline as Enum e.g. Arch, Str ... etc</param>
/// <param name="profile">Column Profile</param>
public HndzColumnStandardCase(HndzLine extrusionLine, HndzProfile profile, HndzStorey storey = null, Double baseOffset = 0,
HndzProductDiscipline discipline = HndzProductDiscipline.Structural) :
this(HndzResources.DefaultName, HndzResources.DefaultDescription, profile, extrusionLine, storey, baseOffset, discipline)
{
}
/// <summary>
/// Constructor takes extrusion line and base storey
/// </summary>
/// <param name="name">Column Name</param>
/// <param name="description">Column Description</param>
/// <param name="extrusionLine">line represents start and end point of the column and its direction</param>
/// <param name="storey">Base Storey</param>
/// <param name="baseOffset">Base Offset from base storey Elevation value</param>
/// <param name="discipline">Discipline as Enum e.g. Arch, Str ... etc</param>
/// <param name="profile">Column Profile</param>
public HndzColumnStandardCase(String name, String description, HndzProfile profile, HndzLine extrusionLine, HndzStorey storey = null, Double baseOffset = 0,
HndzProductDiscipline discipline = HndzProductDiscipline.Structural) :
base(name, description, extrusionLine, profile, storey, baseOffset, discipline)
{
}
/// <summary>
/// main constructor
/// </summary>
/// <param name="profile">constant profile along column extrude direction</param>
/// <param name="name">name for the column</param>
/// <param name="description">description for the column</param>
/// <param name="height">column actual height(in Z-direction)</param>
/// <param name="storey">storey which contains the column base elevation</param>
/// <param name="topLevel">storey which intersects with column top elevation</param>
/// <param name="baseOffset">offset from base</param>
/// <param name="topOffset">offset from top</param>
public HndzBracingStandrdCase(string name, string description, HndzProfile profile, HndzLine extrusionLine, HndzStorey storey = null,
double baseOffset = 0) :
base(name, description, extrusionLine, profile, storey, baseOffset)
{
Profile = profile;
}
/// <summary>
/// our default constructor
/// </summary>
/// <param name="profile">constant profile along column extrude direction</param>
/// <param name="height">column actual height(in Z-direction)</param>
/// <param name="storey">storey which contains the column base elevation</param>
/// <param name="topLevel">storey which intersects with column top elevation</param>
/// <param name="baseOffset">offset from base</param>
/// <param name="topOffset">offset from top</param>
public HndzBracingStandrdCase(HndzProfile profile, HndzLine extrusionLine, HndzStorey storey = null, HndzStorey topLevel = null,
double baseOffset = 0, double topOffset = 0) :
this(HndzResources.DefaultName, HndzResources.DefaultDescription, profile, extrusionLine, storey, baseOffset)
{
}
protected HndzBeam(String name, String description, HndzLine extrusionLine, HndzProfile profile, HndzStorey storey = null, double baseOffset = 0) :
base(name, description, extrusionLine, profile, storey, baseOffset)
{
}