/// <summary>
/// Closes the configuration page of a communication DTM
/// </summary>
/// <returns>
/// <br>True: if action was successful</br>
/// <br>False: if action successful or an error occurred</br>
/// </returns>
public bool Run()
{
var clickOk = new SpecificFlows.ClickButtonOk();
if (clickOk.Run())
{
Log.Success(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Configuration tab was successfully closed");
}
Log.Error(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Could not close configuration dialog because the button to close it is not visible");
return(false);
}
/// <summary>
/// Performs the configuration of the FF H1 Communication DTM
/// </summary>
/// <param name="communication">
/// The communication.
/// </param>
/// <returns>
/// <br>True: if configuration was successful</br>
/// <br>False: if configuration was unsuccessful or errors occurred</br>
/// </returns>
public bool Run(Communication communication)
{
/* Class initialization
*/
var clickOk = new SpecificFlows.ClickButtonOk();
var clickCancel = new SpecificFlows.ClickButtonCancel();
var closeDialog = new SpecificFlows.AcknowledgeMissingLinkDeviceDialog();
var selectLinkDev = new SpecificFlows.SelectLinkDevice();
var waitForReady = new Functions.ApplicationArea.Validation.WaitUntilModuleIsReady();
var checkDialog = new SpecificFlows.CheckIfDialogIsShown();
/* Preconditions:
* Check if commUnit is nullOrEmpty
* There are no valid CommunicationSettings that need to be checked
*/
string commUnit = communication.CommunicationHardwareName;
if (string.IsNullOrEmpty(commUnit))
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Communication Unit value is null. Not possible to configure correctly");
return(false);
}
/* Execution:
* 1) Check if dialog pops up. If so -> terminate
* 2) Check if module is ready
* 3) Set link device
* 4) Click button OK
*/
if (!checkDialog.IsDialogShown())
{
if (waitForReady.Run(30000))
{
// TODO: Find a solution to correctly select an interface when more than one is connected
if (selectLinkDev.Run(commUnit))
{
Log.Success(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Configuration done");
return(true);
}
Log.Error(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "The link device could not be selected. Configuration will abort");
return(false);
}
Log.Error(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "The module was not ready in time. Configuration will abort");
return(false);
}
Log.Error(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "The communication manager is not started. Configuration will abort");
closeDialog.Run();
return(false);
}
/// <summary>
/// Performs the configuration of the PROFIdtmDPV1 Communication DTM
/// </summary>
/// <param name="communication">
/// The communication.
/// </param>
/// <returns>
/// <br>True: if configuration was successful</br>
/// <br>False: if configuration was unsuccessful or errors occurred</br>
/// </returns>
public bool Run(Communication communication)
{
/* Class initialization */
var setBoard = new SpecificFlows.SetBoardName();
var setBaudRate = new SpecificFlows.SetBaudRate();
var setStartAddress = new SpecificFlows.SetStartAddress();
var setEndAddress = new SpecificFlows.SetEndAddress();
var setHighestStationAddress = new SpecificFlows.SetHighestStationAddress();
var setStationAddress = new SpecificFlows.SetStationAddress();
var pressOk = new SpecificFlows.ClickButtonOk();
var pressDefaults = new SpecificFlows.ClickButtonDefaults();
var pressCancel = new SpecificFlows.ClickButtonCancel();
var pressApply = new SpecificFlows.ClickButtonApply();
var waitForReady = new Functions.ApplicationArea.Validation.WaitUntilModuleIsReady();
var parser = new Functions.ApplicationArea.Execution.SettingParser();
string commUnit = communication.CommunicationHardwareName;
string baudRate = string.Empty;
string stationAddress = string.Empty;
string highestStationAddress = string.Empty;
string startAddress = string.Empty;
string endAddress = string.Empty;
bool baudRateSet = false;
bool stationAddressSet = false;
bool highestStationAddressSet = false;
bool startAddressSet = false;
bool endAddressSet = false;
bool defaultConfig = false;
/* Preconditions:
* Check if commUnit is nullOrEmpty
* Check for communication settings:
* Baud Rate, Station Address, Highest Station Address, Start Address, End Address
*
* If no comm settings are present -> click defaults, set board and finish
*/
if (communication.CommunicationSettings.Count <= 0)
{
defaultConfig = true;
}
else
{
foreach (CommunicationSetting cs in communication.CommunicationSettings)
{
if (parser.Parse(cs.SettingName) == "baud rate")
{
if (!string.IsNullOrEmpty(cs.SettingValue))
{
baudRateSet = true;
baudRate = cs.SettingValue;
}
else
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "A configuration for \"Baud Rate\" exists but value is empty and will therefore be skipped");
}
}
if (parser.Parse(cs.SettingName) == "station address")
{
if (!string.IsNullOrEmpty(cs.SettingValue))
{
stationAddressSet = true;
stationAddress = cs.SettingValue;
}
else
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "A configuration for \"Station Address\" exists but value is empty and will therefore be skipped");
}
}
if (parser.Parse(cs.SettingName) == "highest station address")
{
if (!string.IsNullOrEmpty(cs.SettingValue))
{
highestStationAddressSet = true;
highestStationAddress = cs.SettingValue;
}
else
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "A configuration for \"Highest Station Address\" exists but value is empty and will therefore be skipped");
}
}
if (parser.Parse(cs.SettingName) == "start address")
{
if (!string.IsNullOrEmpty(cs.SettingValue))
{
startAddressSet = true;
startAddress = cs.SettingValue;
}
else
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "A configuration for \"Start Address\" exists but value is empty and will therefore be skipped");
}
}
if (parser.Parse(cs.SettingName) == "end address")
{
if (!string.IsNullOrEmpty(cs.SettingValue))
{
endAddressSet = true;
endAddress = cs.SettingValue;
}
else
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "A configuration for \"End Address\" exists but value is empty and will therefore be skipped");
}
}
}
}
/* Execution:
* 1) Check if module is ready
* 2) check if default flag is set, if so -> default config (press defaults, set board, apply, ok)
* 3) Set link device
* 4) Click button OK
*/
if (waitForReady.Run(30000))
{
if (setBoard.Run(commUnit))
{
if (defaultConfig)
{
// default config
pressDefaults.Run();
pressApply.Run();
Log.Success(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Default Configuration finished without errors");
return(true);
}
bool result = true;
if (baudRateSet)
{
if (setBaudRate.Run(baudRate))
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Baud rate " + baudRate + " correctly set");
}
else
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Baud rate " + baudRate + " not correctly set");
result = false;
}
}
if (stationAddressSet)
{
if (setStationAddress.Run(stationAddress))
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Station address " + baudRate + " correctly set");
}
else
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Station address " + baudRate + " not correctly set");
result = false;
}
}
if (highestStationAddressSet)
{
if (setHighestStationAddress.Run(highestStationAddress))
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Highest station address " + highestStationAddress + " correctly set");
}
else
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Highest station address " + highestStationAddress + " not correctly set");
result = false;
}
}
if (startAddressSet)
{
if (setStartAddress.Run(startAddress))
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Start address " + startAddress + " correctly set");
}
else
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Start address " + startAddress + " not correctly set");
result = false;
}
}
if (endAddressSet)
{
if (setEndAddress.Run(endAddress))
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "End address " + endAddress + " correctly set");
}
else
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "End address " + endAddress + " not correctly set");
result = false;
}
}
if (result)
{
Log.Success(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Configuration finished without errors");
pressApply.Run();
return(true);
}
Log.Error(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Configuration finished with errors");
pressApply.Run();
return(false);
}
Log.Error(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "The board could not be set. Terminating the configuration");
return(false);
}
Log.Error(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Module was not ready in time. Terminating the configuration");
return(false);
}