public void TestSelectComponentsLink(string modelName)
{
ModelDoc2 doc = OpenSWDocument(modelName);
AssemblyDoc assyDoc = (AssemblyDoc)doc;
LinkNode baseNode = ConfigurationSerialization.LoadBaseNodeFromModel(doc, out bool abortProcess);
Assert.False(abortProcess);
Link baseLink = baseNode.RebuildLink();
List <Component2> componentsToSelect = new List <Component2>();
AddLinkComponents(baseLink, componentsToSelect);
HashSet <string> componentsToSelectNames =
new HashSet <string>(componentsToSelect.Select(component => component.Name2));
CommonSwOperations.SelectComponents(doc, baseLink, true);
SelectionMgr selManager = doc.SelectionManager;
int numSelected = selManager.GetSelectedObjectCount2(-1);
Assert.Equal(componentsToSelect.Count, numSelected);
for (int i = 0; i < selManager.GetSelectedObjectCount2(-1); i++)
{
Component2 comp = selManager.GetSelectedObjectsComponent4(i, -1);
Assert.Contains(comp.Name2, componentsToSelectNames);
}
SwApp.CloseAllDocuments(true);
}
public void TestSelectComponentsList(string modelName)
{
ModelDoc2 doc = OpenSWDocument(modelName);
AssemblyDoc assyDoc = (AssemblyDoc)doc;
LinkNode baseNode = Serialization.LoadBaseNodeFromModel(SwApp, doc, out bool abortProcess);
Assert.False(abortProcess);
Link baseLink = baseNode.GetLink();
List <Component2> componentsToSelect = baseLink.SWComponents;
HashSet <string> componentsToSelectNames =
new HashSet <string>(componentsToSelect.Select(component => component.Name2));
Common.SelectComponents(doc, componentsToSelect, true);
SelectionMgr selManager = doc.SelectionManager;
// -1 is the Mark, set to negative one if it's not being used.
int numSelected = selManager.GetSelectedObjectCount2(-1);
Assert.Equal(componentsToSelect.Count, numSelected);
for (int i = 0; i < selManager.GetSelectedObjectCount2(-1); i++)
{
// -1 is the Mark, set to negative one if it's not being used.
Component2 comp = selManager.GetSelectedObjectsComponent4(i, -1);
Assert.Contains(comp.Name2, componentsToSelectNames);
}
SwApp.CloseAllDocuments(true);
}
public void DrawingNoInput()
{
IModelDoc2 modDoc = (IModelDoc2)iSwApp.ActiveDoc;
//获取当前打开文件类型：1-part，2-assembly
int modleType = modDoc.GetType();
//将本体命名
GetAndSetDrawingNo(modDoc);//待完善
//装配体则对下层命名
if (modleType == 2)
{
AssemblyDoc asmDoc = (AssemblyDoc)modDoc;
SelectionMgr selectionMgr = modDoc.SelectionManager;
IModelDoc2 partDoc;
Component2 component;
//asmDoc.getsel
int looptime = selectionMgr.GetSelectedObjectCount2(-1);
while (looptime >= 1)
{
//todo：校核是否是零件类,现在是直接抛出
try
{
looptime--;
component = selectionMgr.GetSelectedObject6(looptime + 1, -1);
partDoc = (IModelDoc2)component.GetModelDoc2();
GetAndSetDrawingNo(partDoc);
}
catch
{ }
}
}
}
/// <summary>
/// Run this function after this.Document is populated. It fills two ref vars with swDocumentTypes_e.
/// </summary>
/// <param name="d">The document type.</param>
/// <param name="od">The top-level document type.</param>
private void GetTypes(ref swDocumentTypes_e d, ref swDocumentTypes_e od)
{
swDocumentTypes_e docT = (swDocumentTypes_e)Document.GetType();
ModelDoc2 overDoc = (ModelDoc2)_swApp.ActiveDoc;
swDocumentTypes_e overDocT = (swDocumentTypes_e)overDoc.GetType();
if ((docT != swDocumentTypes_e.swDocDRAWING && swSelMgr != null) && swSelMgr.GetSelectedObjectCount2(-1) > 0)
{
Component2 comp = (Component2)swSelMgr.GetSelectedObjectsComponent4(1, -1);
if (comp != null)
{
ModelDoc2 cmd = (ModelDoc2)comp.GetModelDoc2();
docT = (swDocumentTypes_e)cmd.GetType();
prop.GetPropertyData(comp);
comp = null;
}
else
{
prop.GetPropertyData(Document);
}
}
else
{
swSelMgr = null;
prop.GetPropertyData(Document);
}
d = docT;
od = overDocT;
}
//Finds the selected components and returns them, used when pulling the items from the selection box because it would be too hard
// for SolidWorks to allow you to access the selectionbox components directly.
public static void getSelectedComponents(ModelDoc2 model, List <Component2> Components, int Mark = -1)
{
SelectionMgr selectionManager = model.SelectionManager;
Components.Clear();
for (int i = 0; i < selectionManager.GetSelectedObjectCount2(Mark); i++)
{
object obj = selectionManager.GetSelectedObject6(i + 1, Mark);
Component2 comp = (Component2)obj;
if (comp != null)
{
Components.Add(comp);
}
}
}
public void SaveAs()
{
IModelDoc2 modDoc = (IModelDoc2)iSwApp.ActiveDoc;
ModelDocExtension mDocExten;
IModelDoc2 swModel;
AssemblyDoc asmDoc = (AssemblyDoc)modDoc;
SelectionMgr selectionMgr = modDoc.SelectionManager;
Component2 component;
string path;
string recentPath;
int errors = 0;
int warnings = 0;
recentPath = iSwApp.GetRecentFiles()[0].Substring(0, modDoc.GetPathName().LastIndexOf("\\"));
int looptime = selectionMgr.GetSelectedObjectCount2(-1);
while (looptime >= 1)
{
try
{
looptime--;
component = selectionMgr.GetSelectedObject6(looptime + 1, -1);
swModel = (IModelDoc2)component.GetModelDoc2();
mDocExten = swModel.Extension;
//todo：校核是否是零件类,现在是直接抛出
//另存为对话框
SaveFileDialog sfd = new SaveFileDialog();
sfd.Title = "另存为";
sfd.InitialDirectory = recentPath;//更改为最近使用
sfd.Filter = "零件| *.sldprt";
sfd.ShowDialog();
path = sfd.FileName;
if (path == "")
{
return;
}
//另存为新零件
mDocExten.SaveAs(path, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Copy, null, ref errors, ref warnings);
//替换现有零件
asmDoc.ReplaceComponents(path, "", false, true);
}
catch
{ }
}
}
public static void GetFace(ModelDoc2 Doc)
{
ModelDocExtension DocEx = Doc.Extension;
SelectionMgr SwSelMrg = Doc.SelectionManager;
DocEx.SelectByID2("", "FACE", -100 / 1000.0, 60 / 1000.0, 15 / 1000.0, false, -1, null, 0);
System.Windows.MessageBox.Show("模拟选中面");
string selcount = SwSelMrg.GetSelectedObjectCount2(-1).ToString();
swSelectType_e seltype = (swSelectType_e)SwSelMrg.GetSelectedObjectType3(1, -1);
if (seltype == swSelectType_e.swSelFACES)
{
Face2 SwFace = SwSelMrg.GetSelectedObject6(1, -1);
System.Windows.MessageBox.Show("选中数:" + selcount + "\r\n选中类型:" + seltype.ToString() + "\r\n选中面面积:" + SwFace.GetArea().ToString());
}
}
public static void GetEdge(ModelDoc2 Doc)
{
ModelDocExtension DocEx = Doc.Extension;
SelectionMgr SwSelMrg = Doc.SelectionManager;
DocEx.SelectByID2("", "EDGE", 0 / 1000.0, 30 / 1000.0, 75 / 1000.0, false, -1, null, 0);
System.Windows.MessageBox.Show("模拟选中边线");
string selcount = SwSelMrg.GetSelectedObjectCount2(-1).ToString();
swSelectType_e seltype = (swSelectType_e)SwSelMrg.GetSelectedObjectType3(1, -1);
if (seltype == swSelectType_e.swSelEDGES)
{
Edge SwEdge = SwSelMrg.GetSelectedObject6(1, -1);
SwEdge.Display(1, 1, 0, 0, true);//true变色开，false关闭变色
System.Windows.MessageBox.Show("选中数:" + selcount + "\r\n选中类型:" + seltype.ToString() + "\r\n选中边已变色");
}
}
public void PartDye()
{
IModelDoc2 modDoc = (IModelDoc2)iSwApp.ActiveDoc;
//获取当前打开文件类型：1-part，2-assembly
int modleType = modDoc.GetType();
dynamic materialPropertyValues;
PartDoc partDoc;
Component2 component;
if (modleType == 1)
{
partDoc = (PartDoc)modDoc;
materialPropertyValues = partDoc.MaterialPropertyValues;
partDoc.MaterialPropertyValues = RandomColorValues(materialPropertyValues);
}
else if (modleType == 2)
{
AssemblyDoc asmDoc = (AssemblyDoc)modDoc;
SelectionMgr selectionMgr = modDoc.SelectionManager;
//asmDoc.getsel
int looptime = selectionMgr.GetSelectedObjectCount2(-1);
while (looptime >= 1)
{
try
{
looptime--;
component = selectionMgr.GetSelectedObject6(looptime + 1, -1);
partDoc = (PartDoc)component.GetModelDoc2();
//todo：校核是否是零件类,现在是直接抛出
materialPropertyValues = partDoc.MaterialPropertyValues;
partDoc.MaterialPropertyValues = RandomColorValues(materialPropertyValues);
}
catch
{ }
}
}
modDoc.GraphicsRedraw2();
}
public static void GetSelectList(ModelDoc2 Doc)
{
ModelDocExtension DocEx = Doc.Extension;
SelectionMgr SwSelMrg = Doc.SelectionManager;
DocEx.SelectByID2("", "FACE", -100 / 1000.0, 60 / 1000.0, 15 / 1000.0, false, -1, null, 0);
DocEx.SelectByID2("", "EDGE", 0 / 1000.0, 30 / 1000.0, 75 / 1000.0, true, -1, null, 0);
System.Windows.MessageBox.Show("模拟选中多个元素完成");
StringBuilder Sb = new StringBuilder("选择集合信息:\r\n");
int selcount = SwSelMrg.GetSelectedObjectCount2(-1);
Sb.Append("选择总数:" + selcount.ToString() + "\r\n");
Sb.Append("-----------------\r\n");
for (int i = 1; i <= selcount; i++)
{
Sb.Append("index参数为" + i.ToString() + "的对象\r\n");
swSelectType_e seltype = (swSelectType_e)SwSelMrg.GetSelectedObjectType3(i, -1);
Sb.Append("类型:" + seltype.ToString().Trim() + "\r\n");
Sb.Append("-----------------\r\n");
}
System.Windows.MessageBox.Show(Sb.ToString());
}
public void StoreToSelection(SelectionMgr swSelMgr, ref AttributeDef mdefattr_chbody)//, ref AttributeDef defattr_chconveyor)
{
System.Windows.Forms.MessageBox.Show("StoreToSelection()");
// If user pressed OK, apply settings to all selected parts (i.e. ChBody in C::E):
for (int isel = 1; isel <= swSelMgr.GetSelectedObjectCount2(-1); isel++)
{
if ((swSelectType_e)swSelMgr.GetSelectedObjectType3(isel, -1) == swSelectType_e.swSelCOMPONENTS)
{
Component2 swPart = (Component2)swSelMgr.GetSelectedObject6(isel, -1);
ModelDoc2 swPartModel = (ModelDoc2)swPart.GetModelDoc();
// fetch SW attribute with Chrono parameters for ChBody
SolidWorks.Interop.sldworks.Attribute myattr = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(mdefattr_chbody, 0);
if (myattr == null)
{
// if not already added to part, create and attach it
myattr = mdefattr_chbody.CreateInstance5(swPartModel, swPart, "Chrono ChBody data", 0, (int)swInConfigurationOpts_e.swThisConfiguration);
swPartModel.ForceRebuild3(false); // needed?
if (myattr == null)
{
System.Windows.Forms.MessageBox.Show("myattr null in setting!!");
}
}
((Parameter)myattr.GetParameter("collision_on")).SetDoubleValue2(
Convert.ToDouble(m_collide), (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("friction")).SetDoubleValue2(
m_friction, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("rolling_friction")).SetDoubleValue2(
m_rolling_friction, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("spinning_friction")).SetDoubleValue2(
m_spinning_friction, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("restitution")).SetDoubleValue2(
m_restitution, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("collision_margin")).SetDoubleValue2(
m_collision_margin, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("collision_envelope")).SetDoubleValue2(
m_collision_envelope, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("collision_family")).SetDoubleValue2(
(double)m_collision_family, (int)swInConfigurationOpts_e.swThisConfiguration, "");
/*
* // fetch SW attribute with Chrono parameters for ChConveyor
* SolidWorks.Interop.sldworks.Attribute myattr_conveyor = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(defattr_chconveyor, 0);
* if (myattr_conveyor == null)
* {
* // if not already added to part, create and attach it
* myattr_conveyor = defattr_chconveyor.CreateInstance5(swPartModel, swPart, "Chrono ChConveyor data", 0, (int)swInConfigurationOpts_e.swThisConfiguration);
* if (myattr_conveyor == null)
* System.Windows.Forms.MessageBox.Show("myattr null in setting!!");
* }
*
* ((Parameter)myattr_conveyor.GetParameter("conveyor_speed")).SetDoubleValue2(
* m_conveyor_speed, (int)swInConfigurationOpts_e.swThisConfiguration, "");
*/
}
}
}
public void UpdateFromSelection(SelectionMgr swSelMgr, ref AttributeDef mdefattr_chbody)//, ref AttributeDef defattr_chconveyor)
{
// Fetch current properties from the selected part(s) (i.e. ChBody in C::E)
for (int isel = 1; isel <= swSelMgr.GetSelectedObjectCount2(-1); isel++)
{
if ((swSelectType_e)swSelMgr.GetSelectedObjectType3(isel, -1) == swSelectType_e.swSelCOMPONENTS)
{
Component2 swPart = (Component2)swSelMgr.GetSelectedObject6(isel, -1);
ModelDoc2 swPartModel = (ModelDoc2)swPart.GetModelDoc();
// fetch SW attribute with Chrono parameters for ChBody
SolidWorks.Interop.sldworks.Attribute myattr = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(mdefattr_chbody, 0);
if (myattr == null)
{
// if not already added to part, create and attach it
myattr = mdefattr_chbody.CreateInstance5(swPartModel, swPart, "Chrono::ChBody_data", 0, (int)swInConfigurationOpts_e.swAllConfiguration);
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityInvalid))
{
System.Windows.Forms.MessageBox.Show("swIsEntityInvalid!");
}
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntitySuppressed))
{
System.Windows.Forms.MessageBox.Show("swIsEntitySuppressed!");
}
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityAmbiguous))
{
System.Windows.Forms.MessageBox.Show("swIsEntityAmbiguous!");
}
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityDeleted))
{
System.Windows.Forms.MessageBox.Show("swIsEntityDeleted!");
}
swPartModel.ForceRebuild3(false); // needed?
}
Set_collision_on(Convert.ToBoolean(((Parameter)myattr.GetParameter(
"collision_on")).GetDoubleValue()));
Set_friction(((Parameter)myattr.GetParameter(
"friction")).GetDoubleValue());
Set_rolling_friction(((Parameter)myattr.GetParameter(
"rolling_friction")).GetDoubleValue());
Set_spinning_friction(((Parameter)myattr.GetParameter(
"spinning_friction")).GetDoubleValue());
Set_restitution(((Parameter)myattr.GetParameter(
"restitution")).GetDoubleValue());
Set_collision_envelope(((Parameter)myattr.GetParameter(
"collision_envelope")).GetDoubleValue());
Set_collision_margin(((Parameter)myattr.GetParameter(
"collision_margin")).GetDoubleValue());
Set_collision_family((int)((Parameter)myattr.GetParameter(
"collision_family")).GetDoubleValue());
// fetch SW attribute with Chrono parameters for ChConveyor
/*
* SolidWorks.Interop.sldworks.Attribute myattr_conv = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(defattr_chconveyor, 0);
* if (myattr_conv == null)
* {
* // if not already added to part, create and attach it
* //myattr_conv = defattr_chconveyor.CreateInstance5(swPartModel, swPart, "Chrono::ChConveyor_data", 0, (int)swInConfigurationOpts_e.swThisConfiguration);
* }
*/
/*
* // fetch SW attribute with Chrono parameters for ChConveyor (if any!)
* SolidWorks.Interop.sldworks.Attribute myattr_conveyor = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(defattr_chconveyor, 0);
* if (myattr_conveyor != null)
* {
* show_conveyor_params = true;
*
* Set_conveyor_speed(((Parameter)myattr_conveyor.GetParameter(
* "conveyor_speed")).GetDoubleValue());
* }
*/
}
}
}
public void UpdateFromSelection(SelectionMgr swSelMgr, ref AttributeDef mdefattr_chbody)//, ref AttributeDef defattr_chconveyor)
{
// Fetch current properties from the selected part(s) (i.e. ChBody in C::E)
for (int isel = 1; isel <= swSelMgr.GetSelectedObjectCount2(-1); isel++)
{
if ((swSelectType_e)swSelMgr.GetSelectedObjectType3(isel, -1) == swSelectType_e.swSelCOMPONENTS)
{
//Component2 swPart = (Component2)swSelMgr.GetSelectedObject6(isel, -1);
Component2 swPart = swSelMgr.GetSelectedObjectsComponent3(isel, -1);
ModelDoc2 swPartModel = (ModelDoc2)swPart.GetModelDoc2();
Component2 swPartcorr = swPartModel.Extension.GetCorresponding(swPart); // ***TODO*** for instanced parts? does not work...
swPartcorr = swPart; // ***TODO***
if (swPartModel.GetType() == (int)swDocumentTypes_e.swDocASSEMBLY)
{
if (swPart.Solving == (int)swComponentSolvingOption_e.swComponentFlexibleSolving)
{
System.Windows.Forms.MessageBox.Show("Fexible assemblies not supported as ChBody (set as Rigid?)");
return;
}
if (swPart.Solving == (int)swComponentSolvingOption_e.swComponentRigidSolving)
{
System.Windows.Forms.MessageBox.Show("Setting props to rigid assembly as ChBody");
AssemblyDoc swAssemblyDoc = (AssemblyDoc)swPartModel;
swPart.Select(false);
swAssemblyDoc.EditAssembly();
swAssemblyDoc.EditRebuild();
//return;
}
}
// fetch SW attribute with Chrono parameters for ChBody
SolidWorks.Interop.sldworks.Attribute myattr = null;
if (swPartcorr != null)
{
myattr = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(mdefattr_chbody, 0);
}
if (myattr == null)
{
// if not already added to part, create and attach it
//System.Windows.Forms.MessageBox.Show("Create data");
myattr = mdefattr_chbody.CreateInstance5(swPartModel, swPartcorr, "Chrono::ChBody_data", 0, (int)swInConfigurationOpts_e.swAllConfiguration);
swPartModel.ForceRebuild3(false); // needed, but does not work...
//swPartModel.Rebuild((int)swRebuildOptions_e.swRebuildAll); // needed but does not work...
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityInvalid))
{
System.Windows.Forms.MessageBox.Show("swIsEntityInvalid!");
}
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntitySuppressed))
{
System.Windows.Forms.MessageBox.Show("swIsEntitySuppressed!");
}
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityAmbiguous))
{
System.Windows.Forms.MessageBox.Show("swIsEntityAmbiguous!");
}
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityDeleted))
{
System.Windows.Forms.MessageBox.Show("swIsEntityDeleted!");
}
}
Set_collision_on(Convert.ToBoolean(((Parameter)myattr.GetParameter(
"collision_on")).GetDoubleValue()));
Set_friction(((Parameter)myattr.GetParameter(
"friction")).GetDoubleValue());
Set_rolling_friction(((Parameter)myattr.GetParameter(
"rolling_friction")).GetDoubleValue());
Set_spinning_friction(((Parameter)myattr.GetParameter(
"spinning_friction")).GetDoubleValue());
Set_restitution(((Parameter)myattr.GetParameter(
"restitution")).GetDoubleValue());
Set_collision_envelope(((Parameter)myattr.GetParameter(
"collision_envelope")).GetDoubleValue());
Set_collision_margin(((Parameter)myattr.GetParameter(
"collision_margin")).GetDoubleValue());
Set_collision_family((int)((Parameter)myattr.GetParameter(
"collision_family")).GetDoubleValue());
// fetch SW attribute with Chrono parameters for ChConveyor
/*
* SolidWorks.Interop.sldworks.Attribute myattr_conv = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(defattr_chconveyor, 0);
* if (myattr_conv == null)
* {
* // if not already added to part, create and attach it
* //myattr_conv = defattr_chconveyor.CreateInstance5(swPartModel, swPart, "Chrono::ChConveyor_data", 0, (int)swInConfigurationOpts_e.swThisConfiguration);
* }
*/
/*
* // fetch SW attribute with Chrono parameters for ChConveyor (if any!)
* SolidWorks.Interop.sldworks.Attribute myattr_conveyor = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(defattr_chconveyor, 0);
* if (myattr_conveyor != null)
* {
* show_conveyor_params = true;
*
* Set_conveyor_speed(((Parameter)myattr_conveyor.GetParameter(
* "conveyor_speed")).GetDoubleValue());
* }
*/
}
}
}
//, ref AttributeDef defattr_chconveyor)
public void UpdateFromSelection(SelectionMgr swSelMgr, ref AttributeDef mdefattr_chbody)
{
// Fetch current properties from the selected part(s) (i.e. ChBody in C::E)
for (int isel = 1; isel <= swSelMgr.GetSelectedObjectCount2(-1); isel++)
if ((swSelectType_e)swSelMgr.GetSelectedObjectType3(isel, -1) == swSelectType_e.swSelCOMPONENTS)
{
//Component2 swPart = (Component2)swSelMgr.GetSelectedObject6(isel, -1);
Component2 swPart = swSelMgr.GetSelectedObjectsComponent3(isel, -1);
ModelDoc2 swPartModel = (ModelDoc2)swPart.GetModelDoc2();
Component2 swPartcorr = swPartModel.Extension.GetCorresponding(swPart);// ***TODO*** for instanced parts? does not work...
swPartcorr = swPart; // ***TODO***
if (swPartModel.GetType() == (int)swDocumentTypes_e.swDocASSEMBLY)
{
if (swPart.Solving == (int)swComponentSolvingOption_e.swComponentFlexibleSolving)
{
System.Windows.Forms.MessageBox.Show("Fexible assemblies not supported as ChBody (set as Rigid?)");
return;
}
if (swPart.Solving == (int)swComponentSolvingOption_e.swComponentRigidSolving)
{
System.Windows.Forms.MessageBox.Show("Setting props to rigid assembly as ChBody");
AssemblyDoc swAssemblyDoc = (AssemblyDoc)swPartModel;
swPart.Select(false);
swAssemblyDoc.EditAssembly();
swAssemblyDoc.EditRebuild();
//return;
}
}
// fetch SW attribute with Chrono parameters for ChBody
SolidWorks.Interop.sldworks.Attribute myattr = null;
if (swPartcorr != null)
myattr = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(mdefattr_chbody, 0);
if (myattr == null)
{
// if not already added to part, create and attach it
//System.Windows.Forms.MessageBox.Show("Create data");
myattr = mdefattr_chbody.CreateInstance5(swPartModel, swPartcorr, "Chrono::ChBody_data", 0, (int)swInConfigurationOpts_e.swAllConfiguration);
swPartModel.ForceRebuild3(false); // needed, but does not work...
//swPartModel.Rebuild((int)swRebuildOptions_e.swRebuildAll); // needed but does not work...
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityInvalid))
System.Windows.Forms.MessageBox.Show("swIsEntityInvalid!");
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntitySuppressed))
System.Windows.Forms.MessageBox.Show("swIsEntitySuppressed!");
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityAmbiguous))
System.Windows.Forms.MessageBox.Show("swIsEntityAmbiguous!");
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityDeleted))
System.Windows.Forms.MessageBox.Show("swIsEntityDeleted!");
}
Set_collision_on(Convert.ToBoolean(((Parameter)myattr.GetParameter(
"collision_on")).GetDoubleValue()));
Set_friction(((Parameter)myattr.GetParameter(
"friction")).GetDoubleValue());
Set_rolling_friction(((Parameter)myattr.GetParameter(
"rolling_friction")).GetDoubleValue());
Set_spinning_friction(((Parameter)myattr.GetParameter(
"spinning_friction")).GetDoubleValue());
Set_restitution(((Parameter)myattr.GetParameter(
"restitution")).GetDoubleValue());
Set_collision_envelope(((Parameter)myattr.GetParameter(
"collision_envelope")).GetDoubleValue());
Set_collision_margin(((Parameter)myattr.GetParameter(
"collision_margin")).GetDoubleValue());
Set_collision_family((int)((Parameter)myattr.GetParameter(
"collision_family")).GetDoubleValue());
// fetch SW attribute with Chrono parameters for ChConveyor
/*
SolidWorks.Interop.sldworks.Attribute myattr_conv = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(defattr_chconveyor, 0);
if (myattr_conv == null)
{
// if not already added to part, create and attach it
//myattr_conv = defattr_chconveyor.CreateInstance5(swPartModel, swPart, "Chrono::ChConveyor_data", 0, (int)swInConfigurationOpts_e.swThisConfiguration);
}
*/
/*
// fetch SW attribute with Chrono parameters for ChConveyor (if any!)
SolidWorks.Interop.sldworks.Attribute myattr_conveyor = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(defattr_chconveyor, 0);
if (myattr_conveyor != null)
{
show_conveyor_params = true;
Set_conveyor_speed(((Parameter)myattr_conveyor.GetParameter(
"conveyor_speed")).GetDoubleValue());
}
*/
}
}
//, ref AttributeDef defattr_chconveyor)
public void StoreToSelection(SelectionMgr swSelMgr, ref AttributeDef mdefattr_chbody)
{
//System.Windows.Forms.MessageBox.Show("StoreToSelection()");
// If user pressed OK, apply settings to all selected parts (i.e. ChBody in C::E):
for (int isel = 1; isel <= swSelMgr.GetSelectedObjectCount2(-1); isel++)
if ((swSelectType_e)swSelMgr.GetSelectedObjectType3(isel, -1) == swSelectType_e.swSelCOMPONENTS)
{
//Component2 swPart = (Component2)swSelMgr.GetSelectedObject6(isel, -1);
Component2 swPart = swSelMgr.GetSelectedObjectsComponent3(isel, -1);
ModelDoc2 swPartModel = (ModelDoc2)swPart.GetModelDoc2();
Component2 swPartcorr = swPartModel.Extension.GetCorresponding(swPart);// ***TODO*** for instanced parts? does not work...
swPartcorr = swPart; // ***TODO***
// fetch SW attribute with Chrono parameters for ChBody
SolidWorks.Interop.sldworks.Attribute myattr = (SolidWorks.Interop.sldworks.Attribute)swPartcorr.FindAttribute(mdefattr_chbody, 0);
if (myattr == null)
{
// if not already added to part, create and attach it
System.Windows.Forms.MessageBox.Show("Create data [should not happen here]");
myattr = mdefattr_chbody.CreateInstance5(swPartModel, swPartcorr, "Chrono::ChBody data", 0, (int)swInConfigurationOpts_e.swThisConfiguration);
swPartModel.ForceRebuild3(false); // needed?
if (myattr == null) System.Windows.Forms.MessageBox.Show("Error: myattr null in setting!!");
}
((Parameter)myattr.GetParameter("collision_on")).SetDoubleValue2(
Convert.ToDouble(m_collide), (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("friction")).SetDoubleValue2(
m_friction, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("rolling_friction")).SetDoubleValue2(
m_rolling_friction, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("spinning_friction")).SetDoubleValue2(
m_spinning_friction, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("restitution")).SetDoubleValue2(
m_restitution, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("collision_margin")).SetDoubleValue2(
m_collision_margin, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("collision_envelope")).SetDoubleValue2(
m_collision_envelope, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("collision_family")).SetDoubleValue2(
(double)m_collision_family, (int)swInConfigurationOpts_e.swThisConfiguration, "");
/*
// fetch SW attribute with Chrono parameters for ChConveyor
SolidWorks.Interop.sldworks.Attribute myattr_conveyor = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(defattr_chconveyor, 0);
if (myattr_conveyor == null)
{
// if not already added to part, create and attach it
myattr_conveyor = defattr_chconveyor.CreateInstance5(swPartModel, swPart, "Chrono ChConveyor data", 0, (int)swInConfigurationOpts_e.swThisConfiguration);
if (myattr_conveyor == null)
System.Windows.Forms.MessageBox.Show("myattr null in setting!!");
}
((Parameter)myattr_conveyor.GetParameter("conveyor_speed")).SetDoubleValue2(
m_conveyor_speed, (int)swInConfigurationOpts_e.swThisConfiguration, "");
*/
}
}
//, ref AttributeDef defattr_chconveyor)
public void UpdateFromSelection(SelectionMgr swSelMgr, ref AttributeDef mdefattr_chbody)
{
// Fetch current properties from the selected part(s) (i.e. ChBody in C::E)
for (int isel = 1; isel <= swSelMgr.GetSelectedObjectCount2(-1); isel++)
if ((swSelectType_e)swSelMgr.GetSelectedObjectType3(isel, -1) == swSelectType_e.swSelCOMPONENTS)
{
Component2 swPart = (Component2)swSelMgr.GetSelectedObject6(isel, -1);
ModelDoc2 swPartModel = (ModelDoc2)swPart.GetModelDoc();
// fetch SW attribute with Chrono parameters for ChBody
SolidWorks.Interop.sldworks.Attribute myattr = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(mdefattr_chbody, 0);
if (myattr == null)
{
// if not already added to part, create and attach it
myattr = mdefattr_chbody.CreateInstance5(swPartModel, swPart, "Chrono::ChBody_data", 0, (int)swInConfigurationOpts_e.swAllConfiguration);
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityInvalid))
System.Windows.Forms.MessageBox.Show("swIsEntityInvalid!");
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntitySuppressed))
System.Windows.Forms.MessageBox.Show("swIsEntitySuppressed!");
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityAmbiguous))
System.Windows.Forms.MessageBox.Show("swIsEntityAmbiguous!");
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityDeleted))
System.Windows.Forms.MessageBox.Show("swIsEntityDeleted!");
swPartModel.ForceRebuild3(false); // needed?
}
Set_collision_on(Convert.ToBoolean(((Parameter)myattr.GetParameter(
"collision_on")).GetDoubleValue()));
Set_friction(((Parameter)myattr.GetParameter(
"friction")).GetDoubleValue());
Set_rolling_friction(((Parameter)myattr.GetParameter(
"rolling_friction")).GetDoubleValue());
Set_spinning_friction(((Parameter)myattr.GetParameter(
"spinning_friction")).GetDoubleValue());
Set_restitution(((Parameter)myattr.GetParameter(
"restitution")).GetDoubleValue());
Set_collision_envelope(((Parameter)myattr.GetParameter(
"collision_envelope")).GetDoubleValue());
Set_collision_margin(((Parameter)myattr.GetParameter(
"collision_margin")).GetDoubleValue());
Set_collision_family((int)((Parameter)myattr.GetParameter(
"collision_family")).GetDoubleValue());
// fetch SW attribute with Chrono parameters for ChConveyor
/*
SolidWorks.Interop.sldworks.Attribute myattr_conv = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(defattr_chconveyor, 0);
if (myattr_conv == null)
{
// if not already added to part, create and attach it
//myattr_conv = defattr_chconveyor.CreateInstance5(swPartModel, swPart, "Chrono::ChConveyor_data", 0, (int)swInConfigurationOpts_e.swThisConfiguration);
}
*/
/*
// fetch SW attribute with Chrono parameters for ChConveyor (if any!)
SolidWorks.Interop.sldworks.Attribute myattr_conveyor = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(defattr_chconveyor, 0);
if (myattr_conveyor != null)
{
show_conveyor_params = true;
Set_conveyor_speed(((Parameter)myattr_conveyor.GetParameter(
"conveyor_speed")).GetDoubleValue());
}
*/
}
}