public void Draw()
{
float width3 = 156 / 3 - GUI.skin.button.margin.right * 2.0f / 3.0f;
GUILayout.BeginVertical(GUILayout.Width(156), GUILayout.Height(300));
{
selected = GUILayout.Toolbar(selected, Tabs, GUILayout.Width(160 - GUI.skin.button.margin.right * 2.0f));
switch (selected)
{
case 0:
Target();
break;
case 1:
HDG();
break;
case 2:
Fine();
break;
}
GUILayout.FlexibleSpace();
GUILayout.BeginHorizontal();
{
GUILayout.FlexibleSpace();
RTUtil.Button(new GUIContent(">>", "Toggles the queue and delay functionality."),
mOnClickQueue, GUILayout.Width(width3));
}
GUILayout.EndHorizontal();
}
GUILayout.EndVertical();
}
public void Draw()
{
float width3 = 156 / 3 - GUI.skin.button.margin.right * 2.0f / 3.0f;
GUILayout.BeginVertical();
{
GUILayout.BeginHorizontal();
{
GUIStyle guiTableRow = new GUIStyle(HighLogic.Skin.label);
guiTableRow.normal.textColor = Color.white;
RTUtil.FakeStateButton(new GUIContent("HBNT", "Ultra-low power hibernation with all active antennas shut down."), () => RTCore.Instance.StartCoroutine(OnPowerClick(PowerModes.Hibernate)), (int)mPowerMode, (int)PowerModes.Hibernate, GUILayout.Width(width3));
RTUtil.FakeStateButton(new GUIContent("THLD", "Optimally adaptive power-saving threshold control on all antennas"), () => RTCore.Instance.StartCoroutine(OnPowerClick(PowerModes.AntennaSaver)), (int)mPowerMode, (int)PowerModes.AntennaSaver, GUILayout.Width(width3));
RTUtil.Button(new GUIContent("WAKE", "Terminate any power-saving state."), () => RTCore.Instance.StartCoroutine(OnPowerClick(PowerModes.Wake)), GUILayout.Width(width3));
}
GUILayout.EndHorizontal();
GUILayout.Space(300);
GUILayout.BeginHorizontal();
{
GUILayout.FlexibleSpace();
RTUtil.Button(new GUIContent(">>", "Toggles the queue and delay functionality."),
mOnClickQueue, GUILayout.Width(width3));
}
GUILayout.EndHorizontal();
}
GUILayout.EndVertical();
}
public void Draw()
{
float width3 = 156 / 3 - GUI.skin.button.margin.right * 2.0f / 3.0f;
GUILayout.BeginVertical();
{
GUILayout.BeginHorizontal();
{
GUIStyle guiTableRow = new GUIStyle(HighLogic.Skin.label);
guiTableRow.normal.textColor = Color.white;
RTUtil.FakeStateButton(new GUIContent("HBNT", "Ultra-low power state with activated antennas shut down."), () => RTCore.Instance.StartCoroutine(OnPowerClick(PowerModes.Hibernate)), (int)mPowerMode, (int)PowerModes.Hibernate, GUILayout.Width(width3));
GUILayout.Label("", new GUILayoutOption[] { GUILayout.Width(width3) });
RTUtil.Button(new GUIContent("WAKE", "Exit from a power-saving state."), () => RTCore.Instance.StartCoroutine(OnPowerClick(PowerModes.Wake)), GUILayout.Width(width3));
}
GUILayout.EndHorizontal();
GUILayout.Space(200);
GUILayout.BeginHorizontal();
{
GUILayout.FlexibleSpace();
RTUtil.Button(new GUIContent(">>", "Toggles the queue and delay functionality."),
mOnClickQueue, GUILayout.Width(width3));
}
GUILayout.EndHorizontal();
}
GUILayout.EndVertical();
}
public void Draw()
{
if (Event.current.Equals(Event.KeyboardEvent("return")) && GUI.GetNameOfFocusedControl() == "rt_xd")
{
RTCore.Instance.StartCoroutine(onClickAddExtraDelay());
}
GUILayout.BeginVertical();
{
mScrollPosition = GUILayout.BeginScrollView(mScrollPosition, GUILayout.Width(250));
{
{
GUILayout.BeginHorizontal(GUI.skin.box);
{
var s = new StringBuilder();
foreach (var c in mFlightComputer.ActiveCommands)
{
s.Append(c.Description);
}
GUILayout.Label(s.ToString().TrimEnd(Environment.NewLine.ToCharArray()));
GUILayout.FlexibleSpace();
RTUtil.Button("x", () => RTCore.Instance.StartCoroutine(OnClickReset()), GUILayout.Width(21), GUILayout.Height(21));
}
GUILayout.EndHorizontal();
foreach (var c in mFlightComputer.QueuedCommands)
{
GUILayout.BeginHorizontal(GUI.skin.box);
{
GUILayout.Label(c.Description);
GUILayout.FlexibleSpace();
GUILayout.BeginVertical();
{
RTUtil.Button("x", () => RTCore.Instance.StartCoroutine(OnClickCancel(c)), GUILayout.Width(21), GUILayout.Height(21));
RTUtil.Button(new GUIContent("v", Localizer.Format("#RT_QueueFragment_Setsignaldelay", RTUtil.FormatDuration(c.Delay + c.ExtraDelay + getBurnTime(c), false))), () => RTCore.Instance.StartCoroutine(onClickAddExtraDelayFromQueuedCommand(c)), GUILayout.Width(21), GUILayout.Height(21));//string.Format("Set the signal delay right after this - Current: {0}", )
}
GUILayout.EndVertical();
}
GUILayout.EndHorizontal();
}
}
}
GUILayout.EndScrollView();
GUILayout.Label(Status);
GUILayout.BeginHorizontal();
{
GUILayout.Label(new GUIContent(Localizer.Format("#RT_QueueFragment_Signaldelay", RTUtil.FormatDuration(mFlightComputer.TotalDelay)), Localizer.Format("#RT_QueueFragment_Signaldelay_desc")));//"Delay (+ signal): " "Total delay including signal delay."
GUILayout.FlexibleSpace();
GUI.SetNextControlName("rt_xd");
RTUtil.TextField(ref mExtraDelay, GUILayout.Width(45));
RTUtil.Button(new GUIContent(">", Localizer.Format("#RT_QueueFragment_AddExtraDelay_desc")), () => RTCore.Instance.StartCoroutine(onClickAddExtraDelay()), GUILayout.Width(21), GUILayout.Height(21));//"Add extra signal delay - Example: 125, 125s, 5m20s, 1d6h20m10s"
}
GUILayout.EndHorizontal();
}
GUILayout.EndVertical();
}
public void Draw()
{
if (Satellite == null)
{
return;
}
GUILayout.BeginHorizontal();
{
GUILayout.TextField(Satellite.Name.Truncate(25), GUILayout.ExpandWidth(true));
RTUtil.Button(Localizer.Format("#RT_NetworkFB_NameButton"), () =>//"Name"
{
var vessel = RTUtil.GetVesselById(Satellite.Guid);
if (vessel)
{
vessel.RenameVessel();
}
}, GUILayout.ExpandWidth(false), GUILayout.Height(24));
}
GUILayout.EndHorizontal();
mScrollPosition = GUILayout.BeginScrollView(mScrollPosition, GUILayout.ExpandHeight(true));
{
Color pushColor = GUI.contentColor;
TextAnchor pushAlign = GUI.skin.button.alignment;
GUI.skin.button.alignment = TextAnchor.MiddleLeft;
foreach (var a in Satellite.Antennas.Where(a => a.CanTarget))
{
GUI.contentColor = (a.Powered) ? XKCDColors.ElectricLime : XKCDColors.Scarlet;
String text = a.Name.Truncate(25) + Environment.NewLine + Localizer.Format("#RT_NetworkFB_Target") + RTUtil.TargetName(a.Target).Truncate(18);//"Target: "
RTUtil.StateButton(text, Antenna, a, s =>
{
Antenna = (s > 0) ? a : null;
});
}
GUI.skin.button.alignment = pushAlign;
GUI.contentColor = pushColor;
}
GUILayout.EndScrollView();
}
public void Draw()
{
float width3 = 156 / 3 - GUI.skin.button.margin.right * 2.0f / 3.0f;
GUILayout.BeginVertical();
{
selectedModeIndex = GUILayout.Toolbar(selectedModeIndex, Tabs, GUILayout.Width(width3 * 3 + GUI.skin.button.margin.right * 2.0f));
GUILayout.Space(5);
switch (selectedModeIndex)
{
case (int)RoverModes.TargetMode:
DrawTargetContent();
break;
case (int)RoverModes.HeadingMode:
DrawHDGContent();
break;
case (int)RoverModes.FineMode:
DrawFineContent();
break;
}
GUILayout.Space(5);
GUILayout.BeginHorizontal();
{
RTUtil.Button(new GUIContent(Localizer.Format("#RT_RoverFragment_DRIVE"), Localizer.Format("#RT_RoverFragment_DRIVE_desc")),//"DRIVE", "Starts the automatic driving."
delegate { OnExecClick(selectedModeIndex); }, GUILayout.Width(width3));
GUILayout.FlexibleSpace();
RTUtil.Button(new GUIContent(">>", Localizer.Format("#RT_RoverFragment_Queue_desc")),//"Toggles the queue and delay functionality."
mOnClickQueue, GUILayout.Width(width3));
}
GUILayout.EndHorizontal();
}
GUILayout.EndVertical();
}
public void Draw()
{
float width3 = 156 / 3 - GUI.skin.button.margin.right * 2.0f / 3.0f;
GUILayout.BeginVertical();
{
GUILayout.BeginHorizontal();
{
RTUtil.FakeStateButton(new GUIContent(Localizer.Format("#RT_PowerFragment_HBNT"), Localizer.Format("#RT_PowerFragment_HBNT_desc")), () => RTCore.Instance.StartCoroutine(OnPowerClick(PowerModes.Hibernate)), (int)mPowerMode, (int)PowerModes.Hibernate, GUILayout.Width(width3)); //"HBNT", "Ultra-low power hibernation with all active antennas shut down."
RTUtil.FakeStateButton(new GUIContent(Localizer.Format("#RT_PowerFragment_THLD"), Localizer.Format("#RT_PowerFragment_THLD_desc")), () => RTCore.Instance.StartCoroutine(OnPowerClick(PowerModes.AntennaSaver)), (int)mPowerMode, (int)PowerModes.AntennaSaver, GUILayout.Width(width3)); //"THLD", "Optimally adaptive power-saving threshold control on all antennas"
RTUtil.Button(new GUIContent(Localizer.Format("#RT_PowerFragment_WAKE"), Localizer.Format("#RT_PowerFragment_WAKE_desc")), () => RTCore.Instance.StartCoroutine(OnPowerClick(PowerModes.Wake)), GUILayout.Width(width3)); //"WAKE", "Terminate any power-saving state."
}
GUILayout.EndHorizontal();
GUILayout.Space(200);
GUILayout.BeginHorizontal();
{
RTUtil.Button(new GUIContent(">>", Localizer.Format("#RT_PowerFragment_Queue_desc")),//"Toggles the queue and delay functionality."
mOnClickQueue, GUILayout.Width(width3));
}
GUILayout.EndHorizontal();
}
GUILayout.EndVertical();
}
/// <summary>
/// Draws the content of the window
/// </summary>
public override void Window(int uid)
{
// push the current GUI.skin
var pushSkin = GUI.skin;
GUI.skin = HighLogic.Skin;
GUILayout.BeginVertical(GUILayout.Width(500), GUILayout.Height(350));
{
#region Draw debug menue
// Draw the debug menue
GUILayout.BeginHorizontal();
{
// push the font size of buttons
var pushFontsize = GUI.skin.button.fontSize;
GUI.skin.button.fontSize = 11;
int menueItemCounter = 0;
foreach (string menueItem in this.debugMenueItems)
{
RTUtil.FakeStateButton(new GUIContent(menueItem), () => { this.currentDebugMenue = menueItemCounter; }, currentDebugMenue, menueItemCounter, GUILayout.Height(16));
menueItemCounter++;
}
// pop the saved button size back
GUI.skin.button.fontSize = pushFontsize;
}
GUILayout.EndHorizontal();
#endregion
#region Draw content
contentScrollPosition = GUILayout.BeginScrollView(contentScrollPosition);
{
switch (this.currentDebugMenue)
{
case 0: { this.drawRTSettingsTab(); break; }
case 1: { this.drawAPITester(); break; }
case 2: { this.drawGuidReader(); break; }
default: { GUILayout.Label("Item " + this.currentDebugMenue.ToString() + " not yet implemented"); break; }
}
GUILayout.FlexibleSpace();
}
GUILayout.EndScrollView();
#endregion
#region Draw debug log
// Draw a 100 height debug-console at the bottom of the debug-window
GUILayout.BeginVertical(GUILayout.Height(150));
this.drawRTDebugLogEntrys();
GUILayout.EndVertical();
// Draw the clear log button
// Clear Logs Button
GUILayout.BeginHorizontal();
{
var pushFontsize = GUI.skin.button.fontSize;
GUI.skin.button.fontSize = 12;
RTUtil.Button(new GUIContent(Localizer.Format("#RT_DEBUG_Clearbutton", this.currentLogLevel.ToString()), Localizer.Format("#RT_DEBUG_Clearbutton_desc")), () => RTLog.RTLogList[this.currentLogLevel].Clear());//"Clear Logs in ""tbd."
GUI.skin.button.fontSize = pushFontsize;
}
GUILayout.EndHorizontal();
#endregion
}
GUILayout.EndVertical();
base.Window(uid);
// pop back the saved skin
GUI.skin = pushSkin;
}
public void DrawInterface()
{
scrollPosition = GUILayout.BeginScrollView(scrollPosition);
Color pushColor = GUI.backgroundColor;
TextAnchor pushAlign = GUI.skin.button.alignment;
try
{
GUI.skin.button.alignment = TextAnchor.MiddleLeft;
// Depth-first tree traversal.
Stack <Entry> dfs = new Stack <Entry>();
for (int i = 0; i < rootEntry.SubEntries.Count; i++)
{
var child = rootEntry.SubEntries[i];
dfs.Push(child);
}
while (dfs.Count > 0)
{
var current = dfs.Pop();
GUI.backgroundColor = current.Color;
// draw child
GUILayout.BeginHorizontal();
{
GUILayout.Space(current.Depth * (GUI.skin.button.margin.left + 24));
if (current.SubEntries.Count > 0)
{
RTUtil.Button(current.Expanded ? " <" : " >",
() =>
{
current.Expanded = !current.Expanded;
},
GUILayout.Width(24));
}
RTUtil.StateButton(current.Text, selectedEntry == current ? 1 : 0, 1,
(s) =>
{
selectedEntry = current;
Antenna.Target = selectedEntry.Guid;
});
}
GUILayout.EndHorizontal();
// draw child's grandchilden if expanded
if (current.Expanded)
{
for (int j = 0; j < current.SubEntries.Count; j++)
{
var child2 = current.SubEntries[j];
dfs.Push(child2);
}
}
}
}
finally
{
GUILayout.EndScrollView();
GUI.skin.button.alignment = pushAlign;
GUI.backgroundColor = pushColor;
}
}
public void Draw()
{
float width3 = 156 / 3 - GUI.skin.button.margin.right * 2.0f / 3.0f;
if (Event.current.Equals(Event.KeyboardEvent("return")))
{
if (GUI.GetNameOfFocusedControl().StartsWith("rt_phr"))
{
mPitch = Pitch.ToString();
mHeading = Heading.ToString();
mRoll = Roll.ToString();
if (mFlightComputer.InputAllowed)
{
mMode = ComputerMode.Custom;
Confirm();
}
}
else if (GUI.GetNameOfFocusedControl() == "rt_burn")
{
OnBurnClick();
}
}
GUILayout.BeginVertical();
{
GUILayout.BeginHorizontal();
{
RTUtil.FakeStateButton(new GUIContent(Localizer.Format("#RT_AttitudeFragment_KILL"), Localizer.Format("#RT_AttitudeFragment_KILL_desc")), () => RTCore.Instance.StartCoroutine(OnModeClick(ComputerMode.Kill)), (int)mMode, (int)ComputerMode.Kill, GUILayout.Width(width3)); //"KILL", "Kill rotation."
RTUtil.FakeStateButton(new GUIContent(Localizer.Format("#RT_AttitudeFragment_NODE"), Localizer.Format("#RT_AttitudeFragment_NODE_desc")), () => RTCore.Instance.StartCoroutine(OnModeClick(ComputerMode.Node)), (int)mMode, (int)ComputerMode.Node, GUILayout.Width(width3)); //"NODE", "Prograde points in the direction of the first maneuver node."
RTUtil.FakeStateButton(new GUIContent(Localizer.Format("#RT_AttitudeFragment_RVEL"), Localizer.Format("#RT_AttitudeFragment_RVEL_desc")), () => RTCore.Instance.StartCoroutine(OnModeClick(ComputerMode.TargetVel)), (int)mMode, (int)ComputerMode.TargetVel, GUILayout.Width(width3)); //"RVEL", "Prograde relative to target velocity."
}
GUILayout.EndHorizontal();
GUILayout.BeginHorizontal();
{
RTUtil.FakeStateButton(new GUIContent(Localizer.Format("#RT_AttitudeFragment_ORB"), Localizer.Format("#RT_AttitudeFragment_ORB_desc")), () => RTCore.Instance.StartCoroutine(OnModeClick(ComputerMode.Orbital)), (int)mMode, (int)ComputerMode.Orbital, GUILayout.Width(width3)); //"ORB", "Prograde relative to orbital velocity."
RTUtil.FakeStateButton(new GUIContent(Localizer.Format("#RT_AttitudeFragment_SRF"), Localizer.Format("#RT_AttitudeFragment_SRF_desc")), () => RTCore.Instance.StartCoroutine(OnModeClick(ComputerMode.Surface)), (int)mMode, (int)ComputerMode.Surface, GUILayout.Width(width3)); //"SRF", "Prograde relative to surface velocity."
RTUtil.FakeStateButton(new GUIContent(Localizer.Format("#RT_AttitudeFragment_TGT"), Localizer.Format("#RT_AttitudeFragment_TGT_desc")), () => RTCore.Instance.StartCoroutine(OnModeClick(ComputerMode.TargetPos)), (int)mMode, (int)ComputerMode.TargetPos, GUILayout.Width(width3)); //"TGT", "Prograde points directly at target."
}
GUILayout.EndHorizontal();
GUILayout.BeginHorizontal();
{
RTUtil.FakeStateButton(new GUIContent(Localizer.Format("#RT_AttitudeFragment_OFF"), Localizer.Format("#RT_AttitudeFragment_OFF_desc")), () => RTCore.Instance.StartCoroutine(OnModeClick(ComputerMode.Off)), (int)mMode, (int)ComputerMode.Off, GUILayout.Width(width3)); //"OFF", "Set Attitude to Off."
RTUtil.FakeStateButton(new GUIContent(Localizer.Format("#RT_AttitudeFragment_CUSTOM"), Localizer.Format("#RT_AttitudeFragment_CUSTOM_desc")), () => RTCore.Instance.StartCoroutine(OnModeClick(ComputerMode.Custom)), (int)mMode, (int)ComputerMode.Custom, GUILayout.ExpandWidth(true)); //"CUSTOM", "Prograde fixed as pitch, heading, roll relative to north pole."
}
GUILayout.EndHorizontal();
GUILayout.Space(5);
GUILayout.BeginHorizontal();
{
RTUtil.FakeStateButton(new GUIContent(Localizer.Format("#RT_AttitudeFragment_Prograde"), Localizer.Format("#RT_AttitudeFragment_Prograde_desc")), () => RTCore.Instance.StartCoroutine(OnAttitudeClick(FlightAttitude.Prograde)), (int)mAttitude, (int)FlightAttitude.Prograde, GUILayout.Width(width3)); //"GRD\n+", "Orient to Prograde."
RTUtil.FakeStateButton(new GUIContent(Localizer.Format("#RT_AttitudeFragment_RadialPlus"), Localizer.Format("#RT_AttitudeFragment_RadialPlus_desc")), () => RTCore.Instance.StartCoroutine(OnAttitudeClick(FlightAttitude.RadialPlus)), (int)mAttitude, (int)FlightAttitude.RadialPlus, GUILayout.Width(width3)); //"RAD\n+", "Orient to Radial."
RTUtil.FakeStateButton(new GUIContent(Localizer.Format("#RT_AttitudeFragment_NormalPlus"), Localizer.Format("#RT_AttitudeFragment_NormalPlus_desc")), () => RTCore.Instance.StartCoroutine(OnAttitudeClick(FlightAttitude.NormalPlus)), (int)mAttitude, (int)FlightAttitude.NormalPlus, GUILayout.Width(width3)); //"NRM\n+", "Orient to Normal."
}
GUILayout.EndHorizontal();
GUILayout.BeginHorizontal();
{
RTUtil.FakeStateButton(new GUIContent(Localizer.Format("#RT_AttitudeFragment_Retrograde"), Localizer.Format("#RT_AttitudeFragment_Retrograde_desc")), () => RTCore.Instance.StartCoroutine(OnAttitudeClick(FlightAttitude.Retrograde)), (int)mAttitude, (int)FlightAttitude.Retrograde, GUILayout.Width(width3)); //"GRD\n-", "Orient to Retrograde."
RTUtil.FakeStateButton(new GUIContent(Localizer.Format("#RT_AttitudeFragment_RadialMinus"), Localizer.Format("#RT_AttitudeFragment_RadialMinus_desc")), () => RTCore.Instance.StartCoroutine(OnAttitudeClick(FlightAttitude.RadialMinus)), (int)mAttitude, (int)FlightAttitude.RadialMinus, GUILayout.Width(width3)); //"RAD\n-", "Orient to Anti-radial."
RTUtil.FakeStateButton(new GUIContent(Localizer.Format("#RT_AttitudeFragment_NormalMinus"), Localizer.Format("#RT_AttitudeFragment_NormalMinus_desc")), () => RTCore.Instance.StartCoroutine(OnAttitudeClick(FlightAttitude.NormalMinus)), (int)mAttitude, (int)FlightAttitude.NormalMinus, GUILayout.Width(width3)); //"NRM\n-", "Orient to Anti-normal."
}
GUILayout.EndHorizontal();
GUILayout.Space(5);
GUILayout.BeginHorizontal();
{
GUILayout.Label(new GUIContent(Localizer.Format("#RT_AttitudeFragment_PIT"), Localizer.Format("#RT_AttitudeFragment_PIT_desc")), GUILayout.Width(width3));//"PIT:", "Sets pitch."
RTUtil.RepeatButton("+", () => { Pitch++; });
RTUtil.RepeatButton("-", () => { Pitch--; });
RTUtil.MouseWheelTriggerField(ref mPitch, "rt_phr1", () => { Pitch++; }, () => { Pitch--; }, GUILayout.Width(width3));
}
GUILayout.EndHorizontal();
GUILayout.BeginHorizontal();
{
GUILayout.Label(new GUIContent(Localizer.Format("#RT_AttitudeFragment_HDG"), Localizer.Format("#RT_AttitudeFragment_HDG_desc")), GUILayout.Width(width3));//"HDG:", "Sets heading."
RTUtil.RepeatButton("+", () => { Heading++; });
RTUtil.RepeatButton("-", () => { Heading--; });
RTUtil.MouseWheelTriggerField(ref mHeading, "rt_phr2", () => { Heading++; }, () => { Heading--; }, GUILayout.Width(width3));
}
GUILayout.EndHorizontal();
GUILayout.BeginHorizontal();
{
GUILayout.Label(new GUIContent(Localizer.Format("#RT_AttitudeFragment_RLL"), Localizer.Format("#RT_AttitudeFragment_RLL_desc")), GUILayout.Width(width3));//"RLL:", "Sets roll."
RTUtil.RepeatButton("+", () => { Roll++; });
RTUtil.RepeatButton("-", () => { Roll--; });
RTUtil.MouseWheelTriggerField(ref mRoll, "rt_phr3", () => { Roll++; }, () => { Roll--; }, GUILayout.Width(width3));
}
GUILayout.EndHorizontal();
GUILayout.BeginHorizontal();
{
GUILayout.Label(Localizer.Format("#RT_AttitudeFragment_Throttle"));//"Throttle: "
GUILayout.FlexibleSpace();
GUILayout.Label(mThrottle.ToString("P"));
}
GUILayout.EndHorizontal();
RTUtil.HorizontalSlider(ref mThrottle, 0, 1);
GUI.SetNextControlName("rt_burn");
RTUtil.TextField(ref mDuration);
GUILayout.BeginHorizontal();
{
RTUtil.Button(new GUIContent(Localizer.Format("#RT_AttitudeFragment_BURN"), Localizer.Format("#RT_AttitudeFragment_BURN_desc")), //"BURN", "Example: 125, 125s, 5m20s, 1d6h20m10s, 123m/s."
OnBurnClick, GUILayout.Width(width3));
RTUtil.Button(new GUIContent(Localizer.Format("#RT_AttitudeFragment_EXEC"), Localizer.Format("#RT_AttitudeFragment_EXEC_desc")), //"EXEC", "Executes next and subsequent maneuver nodes."
OnExecClick, GUILayout.Width(width3));
RTUtil.Button(new GUIContent(">>", Localizer.Format("#RT_AttitudeFragment_Queue_desc")), //"Toggles the queue and delay functionality."
mOnClickQueue, GUILayout.Width(width3));
}
GUILayout.EndHorizontal();
}
GUILayout.EndVertical();
}
public void Draw()
{
float width3 = 156 / 3 - GUI.skin.button.margin.right * 2.0f / 3.0f;
GUILayout.BeginVertical();
{
Vector3 Torque = SteeringHelper.TorqueAvailable;
var MoI = mFlightComputer.Vessel.MOI;
////////////////
//PITCH INFO
////////////////
GUILayout.Label(new GUIContent("<b>" + Localizer.Format("#RT_PIDControllerFragment_Pitch") + "</b>"));//"Pitch"
GUILayout.BeginHorizontal();
{
GUILayout.Label(new GUIContent(Localizer.Format("#RT_PIDControllerFragment_TorqueMoI"), Localizer.Format("#RT_PIDControllerFragment_TorqueMoI_desc")));//"Torque-MoI Rate: ", "Current rate of torque to mass of inertia"
GUILayout.FlexibleSpace();
GUILayout.Label(new GUIContent((Torque[0] / MoI[0]).ToString("F3")));
}
GUILayout.EndHorizontal();
GUILayout.BeginHorizontal();
{
GUILayout.Label(new GUIContent(Localizer.Format("#RT_PIDControllerFragment_DeviationError"), Localizer.Format("#RT_PIDControllerFragment_DeviationError_desc")));//"Deviation Error: ", "Deviation from the target point"
GUILayout.FlexibleSpace();
GUILayout.Label(new GUIContent(mFlightComputer.PIDController.getDeviationErrors()[0].ToString("F2")));
}
GUILayout.EndHorizontal();
GUILayout.BeginHorizontal();
{
GUILayout.Label(new GUIContent(Localizer.Format("#RT_PIDControllerFragment_Output"), Localizer.Format("#RT_PIDControllerFragment_Output_desc")));//"Output: ", "Output of Flight Control State"
GUILayout.FlexibleSpace();
GUILayout.Label(new GUIContent(mFlightComputer.Vessel.ctrlState.pitch.ToString("F2")));
}
GUILayout.EndHorizontal();
////////////////
//ROLL INFO
////////////////
GUILayout.Label(new GUIContent("<b>" + Localizer.Format("#RT_PIDControllerFragment_Roll") + "</b>"));//"Roll"
GUILayout.BeginHorizontal();
{
GUILayout.Label(new GUIContent(Localizer.Format("#RT_PIDControllerFragment_TorqueMoI"), Localizer.Format("#RT_PIDControllerFragment_TorqueMoI_desc")));//"Torque-MoI Rate: ", "Current rate of torque to mass of inertia"
GUILayout.FlexibleSpace();
GUILayout.Label(new GUIContent((Torque[1] / MoI[1]).ToString("F3")));
}
GUILayout.EndHorizontal();
GUILayout.BeginHorizontal();
{
GUILayout.Label(new GUIContent(Localizer.Format("#RT_PIDControllerFragment_DeviationError"), Localizer.Format("#RT_PIDControllerFragment_DeviationError_desc")));//"Deviation Error: ", "Deviation from the target point"
GUILayout.FlexibleSpace();
GUILayout.Label(new GUIContent(mFlightComputer.PIDController.getDeviationErrors()[1].ToString("F2")));
}
GUILayout.EndHorizontal();
GUILayout.BeginHorizontal();
{
GUILayout.Label(new GUIContent(Localizer.Format("#RT_PIDControllerFragment_Output"), Localizer.Format("#RT_PIDControllerFragment_Output_desc")));//"Output: ", "Output of Flight Control State"
GUILayout.FlexibleSpace();
GUILayout.Label(new GUIContent(mFlightComputer.Vessel.ctrlState.roll.ToString("F2")));
}
GUILayout.EndHorizontal();
////////////////
//YAW INFO
////////////////
GUILayout.Label(new GUIContent("<b>" + Localizer.Format("#RT_PIDControllerFragment_Yaw") + "</b>"));//"Yaw"
GUILayout.BeginHorizontal();
{
GUILayout.Label(new GUIContent(Localizer.Format("#RT_PIDControllerFragment_TorqueMoI"), Localizer.Format("#RT_PIDControllerFragment_TorqueMoI_desc")));//"Torque-MoI Rate: ", "Current rate of torque to mass of inertia"
GUILayout.FlexibleSpace();
GUILayout.Label(new GUIContent((Torque[2] / MoI[2]).ToString("F3")));
}
GUILayout.EndHorizontal();
GUILayout.BeginHorizontal();
{
GUILayout.Label(new GUIContent(Localizer.Format("#RT_PIDControllerFragment_DeviationError"), Localizer.Format("#RT_PIDControllerFragment_DeviationError_desc")));//"Deviation Error: ", "Deviation from the target point"
GUILayout.FlexibleSpace();
GUILayout.Label(new GUIContent(mFlightComputer.PIDController.getDeviationErrors()[2].ToString("F2")));
}
GUILayout.EndHorizontal();
GUILayout.BeginHorizontal();
{
GUILayout.Label(new GUIContent(Localizer.Format("#RT_PIDControllerFragment_Output"), Localizer.Format("#RT_PIDControllerFragment_Output_desc")));//"Output: ", "Output of Flight Control State"
GUILayout.FlexibleSpace();
GUILayout.Label(new GUIContent(mFlightComputer.Vessel.ctrlState.yaw.ToString("F2")));
}
GUILayout.EndHorizontal();
GUILayout.Space(10);
GUILayout.Label(new GUIContent(Localizer.Format("#RT_PIDControllerFragment_PIDHelp")));//"See ni.com/white-paper/3782/en"
GUILayout.BeginHorizontal();
{
GUILayout.Label(new GUIContent(Localizer.Format("#RT_PIDControllerFragment_Kp"), Localizer.Format("#RT_PIDControllerFragment_Kp_desc")));//"Proportional gain", "(1) With I and D terms set to 0, increase until the output of the loop oscillates."
RTUtil.TextField(ref kp, GUILayout.Width(50), GUILayout.ExpandWidth(false));
}
GUILayout.EndHorizontal();
GUILayout.BeginHorizontal();
{
GUILayout.Label(new GUIContent(Localizer.Format("#RT_PIDControllerFragment_Ki"), Localizer.Format("#RT_PIDControllerFragment_Ki_desc")));//"Integral", "(2) Increase to stop the oscillations."
RTUtil.TextField(ref ki, GUILayout.Width(50), GUILayout.ExpandWidth(false));
}
GUILayout.EndHorizontal();
GUILayout.BeginHorizontal();
{
GUILayout.Label(new GUIContent(Localizer.Format("#RT_PIDControllerFragment_Kd"), Localizer.Format("#RT_PIDControllerFragment_Kd_desc")));//"Derivative", "(3) Increase until the loop is acceptably quick to its target point."
RTUtil.TextField(ref kd, GUILayout.Width(50), GUILayout.ExpandWidth(false));
}
GUILayout.EndHorizontal();
GUILayout.Space(5);
GUILayout.BeginHorizontal();
{
RTUtil.Button(new GUIContent(Localizer.Format("#RT_PIDControllerFragment_button1"), Localizer.Format("#RT_PIDControllerFragment_button1_desc")), //"SAVE", "Save all values persistently."
OnSaveClick, GUILayout.Width(width3));
RTUtil.Button(new GUIContent(Localizer.Format("#RT_PIDControllerFragment_button2"), Localizer.Format("#RT_PIDControllerFragment_button2_desc")), //"APLY", "Interface all values to Flight PID Controller."
() => RTCore.Instance.StartCoroutine(OnApplyClick()), GUILayout.Width(width3));
RTUtil.Button(new GUIContent(">>", Localizer.Format("#RT_PIDControllerFragment_Queue_desc")), //"Toggles the queue and delay functionality."
mOnClickQueue, GUILayout.Width(width3));
}
GUILayout.EndHorizontal();
}
GUILayout.EndVertical();
}
public void Draw()
{
// Allow update for non-triggering changes (e.g., changing map view filters or changing a vessel's type)
// This is the best way I could find to do periodic refreshes;
// RTCore.Instance.InvokeRepeating() would require a search for instances
// of AntennaFragment, and would keep running after all target windows
// closed. Replace with something less clunky later! -- Starstrider42
if (++refreshCounter >= 100)
{
Refresh();
refreshCounter = 0;
}
mScrollPosition = GUILayout.BeginScrollView(mScrollPosition);
Color pushColor = GUI.backgroundColor;
// starstriders changes
//Color pushCtColor = GUI.contentColor;
//Color pushBgColor = GUI.backgroundColor;
TextAnchor pushAlign = GUI.skin.button.alignment;
try {
GUI.skin.button.alignment = TextAnchor.MiddleLeft;
// Depth-first tree traversal.
Stack <Entry> dfs = new Stack <Entry>();
foreach (Entry child in mRootEntry.SubEntries)
{
dfs.Push(child);
}
// Set the inital mouseover to the selected entry
mouseOverEntry = mSelection;
while (dfs.Count > 0)
{
Entry current = dfs.Pop();
GUI.backgroundColor = current.Color;
GUILayout.BeginHorizontal();
{
GUILayout.Space(current.Depth * (GUI.skin.button.margin.left + 24));
if (current.SubEntries.Count > 0)
{
RTUtil.Button(current.Expanded ? " <" : " >",
() =>
{
current.Expanded = !current.Expanded;
}, GUILayout.Width(24));
}
RTUtil.StateButton(current.Text, mSelection == current ? 1 : 0, 1,
(s) =>
{
mSelection = current;
Antenna.Target = mSelection.Guid;
});
// Mouse is over the button
if (GUILayoutUtility.GetLastRect().Contains(Event.current.mousePosition) && triggerMouseOverListEntry)
{
// reset current entry
mouseOverEntry = null;
if (current.Text.ToLower() != "active vessel" && current.Text.ToLower() != "no target")
{
mouseOverEntry = current;
}
onMouseOverListEntry.Invoke();
}
}
GUILayout.EndHorizontal();
if (current.Expanded)
{
foreach (Entry child in current.SubEntries)
{
dfs.Push(child);
}
}
}
} finally {
GUILayout.EndScrollView();
GUI.skin.button.alignment = pushAlign;
GUI.backgroundColor = pushColor;
}
}
/// <summary>
/// Draws the content of the window
/// </summary>
public override void Window(int uid)
{
// push the current GUI.skin
var pushSkin = GUI.skin;
GUI.skin = HighLogic.Skin;
GUILayout.BeginVertical(GUILayout.Width(500), GUILayout.Height(350));
{
#region Draw debug menue
// Draw the debug menue
GUILayout.BeginHorizontal();
{
// push the font size of buttons
var pushFontsize = GUI.skin.button.fontSize;
GUI.skin.button.fontSize = 11;
int menueItemCounter = 0;
foreach (string menueItem in this.debugMenueItems)
{
RTUtil.FakeStateButton(new GUIContent(menueItem), () => { this.currentDebugMenue = menueItemCounter; }, currentDebugMenue, menueItemCounter, GUILayout.Height(16));
menueItemCounter++;
}
// pop the saved button size back
GUI.skin.button.fontSize = pushFontsize;
}
GUILayout.EndHorizontal();
#endregion
#region Draw content
contentScrollPosition = GUILayout.BeginScrollView(contentScrollPosition);
{
switch (this.currentDebugMenue)
{
case 0: { this.drawRTSettingsTab(); break; }
case 1: { this.drawAPITester(); break; }
case 2: { this.drawGuidReader(); break; }
default: { GUILayout.Label("Item " + this.currentDebugMenue.ToString() + " not yet implemented"); break; }
}
GUILayout.FlexibleSpace();
}
GUILayout.EndScrollView();
#endregion
#region Draw debug log
// Draw a 100 height debug-console at the bottom of the debug-window
GUILayout.BeginVertical(GUILayout.Height(150));
this.drawRTDebugLogEntrys();
GUILayout.EndVertical();
// Draw the clear log button
// Clear Logs Button
GUILayout.BeginHorizontal();
{
var pushFontsize = GUI.skin.button.fontSize;
GUI.skin.button.fontSize = 12;
RTUtil.Button(new GUIContent("Clear Logs in " + this.currentLogLevel.ToString(), "tbd."), () => RTLog.RTLogList[this.currentLogLevel].Clear());
GUI.skin.button.fontSize = pushFontsize;
}
GUILayout.EndHorizontal();
#endregion
}
GUILayout.EndVertical();
// Set a control lock that we can scroll through textareas
InputLockManager.RemoveControlLock("RTLockDebug");
if (this.backupPosition.ContainsMouse())
{
InputLockManager.SetControlLock(ControlTypes.CAMERACONTROLS, "RTLockDebug");
}
base.Window(uid);
// pop back the saved skin
GUI.skin = pushSkin;
}