public override void Execute(ScriptableRenderContext context, ref RenderingData renderingData)
{
var cmd = CommandBufferPool.Get();
using ProfilingScope scope = new ProfilingScope(cmd, profilingSampler);
cmd.DrawMeshInstancedIndirect(m_hizCullSetting.TargetMesh, 0, m_hizCullSetting.TargetMaterial, 0, m_hizCullSetting.Data.BufferWithArags);
context.ExecuteCommandBuffer(cmd);
CommandBufferPool.Release(cmd);
}
private static ProfilingScope Profile(Delegate action)
{
var result = new ProfilingScope();
#if false
result.Action = action;
result.Stopwatch = new Stopwatch();
result.Stopwatch.Start();
#endif
return(result);
}
private static ProfilingScope GetInitializedScope(string scopeName)
{
ProfilingScope scope;
if (!scopes.TryGetValue(scopeName, out scope))
{
scope = new ProfilingScope(scopeName);
scopes.Add(scopeName, scope);
}
return(scope);
}
public void Step()
{
if (!IsActive)
{
return;
}
using (ProfilingScope.Open(ActiveState))
{
CurrentState.Run(StateStatus.Execute);
TryChangingState();
}
}
public void Step()
{
Debug.Assert(startState != null);
if (activeState == null)
{
activeState = startState;
activeState.StartState();
}
using (ProfilingScope.Open(activeState))
{
//Find the first triggered transition and consume it
var transitions = activeState.Transitions;
foreach (var transition in transitions)
{
if (!transition.IsUsable || !transition.HasTriggered)
{
continue;
}
var targetState = transition.TryConsumingTrigger();
if (targetState == null)
{
continue;
}
//Stop the last state, and start the next one
activeState.StopState();
activeState = targetState;
activeState.StartState();
break;
}
//Execute the current active state
activeState.Execute();
}
}
public bool Setup(ref RenderingData renderingData)
{
using var profScope = new ProfilingScope(null, m_ProfilingSetupSampler);
if (!renderingData.shadowData.supportsMainLightShadows)
{
return(false);
}
Clear();
int shadowLightIndex = renderingData.lightData.mainLightIndex;
if (shadowLightIndex == -1)
{
return(false);
}
VisibleLight shadowLight = renderingData.lightData.visibleLights[shadowLightIndex];
Light light = shadowLight.light;
if (light.shadows == LightShadows.None)
{
return(false);
}
if (shadowLight.lightType != LightType.Directional)
{
Debug.LogWarning("Only directional lights are supported as main light.");
}
Bounds bounds;
if (!renderingData.cullResults.GetShadowCasterBounds(shadowLightIndex, out bounds))
{
return(false);
}
m_ShadowCasterCascadesCount = renderingData.shadowData.mainLightShadowCascadesCount;
int shadowResolution = ShadowUtils.GetMaxTileResolutionInAtlas(renderingData.shadowData.mainLightShadowmapWidth,
renderingData.shadowData.mainLightShadowmapHeight, m_ShadowCasterCascadesCount);
renderTargetWidth = renderingData.shadowData.mainLightShadowmapWidth;
renderTargetHeight = (m_ShadowCasterCascadesCount == 2) ?
renderingData.shadowData.mainLightShadowmapHeight >> 1 :
renderingData.shadowData.mainLightShadowmapHeight;
for (int cascadeIndex = 0; cascadeIndex < m_ShadowCasterCascadesCount; ++cascadeIndex)
{
bool success = ShadowUtils.ExtractDirectionalLightMatrix(ref renderingData.cullResults, ref renderingData.shadowData,
shadowLightIndex, cascadeIndex, renderTargetWidth, renderTargetHeight, shadowResolution, light.shadowNearPlane,
out m_CascadeSplitDistances[cascadeIndex], out m_CascadeSlices[cascadeIndex]);
if (!success)
{
return(false);
}
}
m_MainLightShadowmapTexture = ShadowUtils.GetTemporaryShadowTexture(renderTargetWidth, renderTargetHeight, k_ShadowmapBufferBits);
m_MaxShadowDistanceSq = renderingData.cameraData.maxShadowDistance * renderingData.cameraData.maxShadowDistance;
m_CascadeBorder = renderingData.shadowData.mainLightShadowCascadeBorder;
return(true);
}
public override void Execute(ScriptableRenderContext context, ref RenderingData renderingData)
{
var cmd = CommandBufferPool.Get();
using var scope = new ProfilingScope(cmd, profilingSampler);
ref var rd = ref renderingData;
// Here you can implement the rendering logic.
// Use <c>ScriptableRenderContext</c> to issue drawing commands or execute command buffers
// https://docs.unity3d.com/ScriptReference/Rendering.ScriptableRenderContext.html
// You don't have to call ScriptableRenderContext.submit, the render pipeline will call it at specific points in the pipeline.
public override void Execute(ScriptableRenderContext context, ref RenderingData renderingData)
{
if (m_hizCullSetting.Density <= 0)
{
return;
}
var cmd = CommandBufferPool.Get();
using var profScope = new ProfilingScope(cmd, ProfilingSampler);
var cs = m_hizCullSetting.CullShader;
var data = m_hizCullSetting.Data;
var vp = GL.GetGPUProjectionMatrix(Camera.main.projectionMatrix, false) * Camera.main.worldToCameraMatrix;
data.Args[1] = 0;
var md = m_hizCullSetting.GameDepthTempRT;
if (m_hizCullSetting.Toggle && data.CameraType == CameraType.Game)
{
//m_hizCullSetting.Toggle = false;
var mipmap = m_hizCullSetting.GenerateMipmap;
//Graphics.Blit(depthTargetIdentifier, md);
//m_hizCullSetting.DepthTextureNormalize.SetTexture("_MainTex", d);
cmd.Blit(m_hizCullSetting.Data.DepthTargetIdentifier, md);//,m_hizCullSetting.DepthTextureNormalize,0);
var size = 512;
if (size % 2 == 0 && size > 8)
{
int maxlevel = Mathf.RoundToInt(Mathf.Log(512, 2));
int level = 0;
//Debug.Log(maxlevel);
//goto lerrr;
while (level < maxlevel - 3)
{
var current = level;
var next = ++level;
cmd.SetComputeTextureParam(mipmap, data.GenerateMiamapKernelID, data.SoureceTexID, md, current);
cmd.SetComputeTextureParam(mipmap, data.GenerateMiamapKernelID, data.ResultID, md, next);
//level++;
var dis = (1 << (maxlevel - level)) / 8;
//Debug.Log(dis);
cmd.DispatchCompute(mipmap, data.GenerateMiamapKernelID, dis, dis, 1);
cmd.SetRenderTarget(md);
}
}
}
//m_bufferWithArags.SetData(args);
//m_hizCullSetting.CullShader.SetMatrix(vpID, vp);
//m_hizCullSetting.CullShader.SetBuffer(kernelID, bufferArgsID, m_bufferWithArags);
//m_hizCullSetting.CullShader.Dispatch(kernelID, (width_x) / 25, (width_z) / 25, m_hizCullSetting.Density);
//m_hizCullSetting.TargetMaterial.SetBuffer(visPositionBufferID, m_visPosBuffer);
//commondbuffer 执行方式
cmd.SetBufferData(data.BufferWithArags, data.Args);
cmd.SetComputeMatrixParam(cs, data.VPID, vp);
cmd.SetComputeBufferParam(cs, data.KernelID, data.BufferArgsID, data.BufferWithArags);
cmd.SetComputeBufferParam(cs, data.KernelID, data.PositionBufferID, data.PosAllBuffer);
if (md != null)
{
cmd.SetComputeTextureParam(cs, data.KernelID, "_HizDepthMipmap", md);
}
cmd.DispatchCompute(cs, data.KernelID, (data.Width_x) / 25, (data.Width_z) / 25, m_hizCullSetting.Density);
m_hizCullSetting.TargetMaterial.SetBuffer(data.VisPositionBufferID, data.VisPosBuffer);
m_hizCullSetting.TargetMaterial.EnableKeyword("INSTANCING_ON");
context.ExecuteCommandBuffer(cmd);
CommandBufferPool.Release(cmd);
}
public override void Route(string targetHost, int targetPort, bool?proxyDns = null)
{
using (var prof = new ProfilingScope("Socks5 Route"))
{
if (targetHost is null)
{
throw new ArgumentNullException(nameof(targetHost));
}
var stream = Stream;
var buf = new byte[1024];
var b = 0;
// send authentication header
buf[b++] = 0x05; // Socks ver = 5
buf[b++] = 0x01; // count of auth methods supported
buf[b++] = 0x00; // #1 - no auth (0x00)
stream.Write(buf, 0, b);
stream.Flush();
var count = stream.Read(buf, 0, 2); // auth response
if (count != 2)
{
throw new Exception("Server must respond with 2 bytes (response 1)");
}
if (buf[0] != 0x05)
{
throw new Exception("Server do not support v5 (response 1)");
}
if (buf[1] != 0x00)
{
throw new Exception("Server requires authentication");
}
// here authentication handshake can be added, but I don't see any reason to add clear text passwords
// send the actual request
b = 0;
buf[b++] = 0x05; // ver = 5
buf[b++] = 0x01; // command = stream
buf[b++] = 0x00; // reserved
var targetIsIp = IPAddress.TryParse(targetHost, out var ip);
if (!targetIsIp) // if targetHost is IP - just use IP, otherwise:
{
var dns = Dns.GetHostAddresses(targetHost);
var ipv4 = dns.FirstOrDefault(x => x.AddressFamily == AddressFamily.InterNetwork);
var ipv6 = dns.FirstOrDefault(x => x.AddressFamily == AddressFamily.InterNetworkV6);
ip = ipv4 ?? ipv6; // have to take ipv4 first because ipv6 is not working most of the times and HappyEyeballs is not possible via socks chain due to single connection. Browser will do HappyEyeballs
}
if (!targetIsIp && proxyDns != false || proxyDns == true) // forward the targetHost name
{
buf[b++] = 0x03; // adress type = domain name
buf[b++] = checked ((byte)targetHost.Length); // len
Utils.Ascii.GetBytes(targetHost, 0, targetHost.Length, buf, b); // target host
b += targetHost.Length;
}
else if (ip != null && ip.AddressFamily == AddressFamily.InterNetworkV6)
{
buf[b++] = 0x04; // adress type = IPv6
ip.GetAddressBytes().CopyTo(buf, b);
b += 16;
}
else if (ip != null && ip.AddressFamily == AddressFamily.InterNetwork)
{
buf[b++] = 0x01; // adress type = IPv4
// ip.GetAddressBytes().CopyTo(buf, b);
// b += 4;
var a = ip.Address;
buf[b++] = (byte)(a >> 0);
buf[b++] = (byte)(a >> 8);
buf[b++] = (byte)(a >> 16);
buf[b++] = (byte)(a >> 24);
}
else
{
throw new Exception("Host is not resolved: " + targetHost);
}
buf[b++] = (byte)(targetPort >> 8);
buf[b++] = (byte)(targetPort);
stream.Write(buf, 0, b);
stream.Flush();
// response
var c = stream.Read(buf, 0, 4);
if (c < 4)
{
throw new Exception("Server did not sent full response (response 2)");
}
if (buf[0] != 0x05)
{
throw new Exception("Server does not support v5 (response 2)");
}
if (buf[1] != 0x00)
{
var msg = $"Server response: {buf[1]:X}: {GetResponseErrorMessage(buf[1])}";
Trace.WriteLine(TraceCategory.NetworkingData, msg);
throw new Exception(msg);
}
// ignore reserved buf[2] byte
// read only required number of bytes depending on address type
switch (buf[3])
{
case 1:
// IPv4
c += stream.Read(buf, c, 4);
break;
case 3:
// Name
c += stream.Read(buf, c, 1);
c += stream.Read(buf, c, buf[c - 1]); // 256 max... no reason to protect from owerflow
break;
case 4:
// IPv6
c += stream.Read(buf, c, 16);
break;
default:
throw new Exception("Response address type not supported!");
}
b += stream.Read(buf, b, 2); // port
// we don't need those values because it is stream, not bind
}
}
public bool Setup(ref RenderingData renderingData)
{
using var profScope = new ProfilingScope(null, m_ProfilingSetupSampler);
Clear();
m_ShadowmapWidth = renderingData.shadowData.additionalLightsShadowmapWidth;
m_ShadowmapHeight = renderingData.shadowData.additionalLightsShadowmapHeight;
var visibleLights = renderingData.lightData.visibleLights;
int additionalLightsCount = renderingData.lightData.additionalLightsCount;
if (m_AdditionalLightSlices == null || m_AdditionalLightSlices.Length < additionalLightsCount)
{
m_AdditionalLightSlices = new ShadowSliceData[additionalLightsCount];
}
if (m_AdditionalLightsShadowData == null || m_AdditionalLightsShadowData.Length < additionalLightsCount)
{
m_AdditionalLightsShadowData = new ShaderInput.ShadowData[additionalLightsCount];
}
// By default visible lights do not have shadow light indices.
for (int i = 0; i < visibleLights.Length; ++i)
{
m_ShadowCastingLightIndicesMap.Add(-1);
}
int validShadowCastingLights = 0;
bool supportsSoftShadows = renderingData.shadowData.supportsSoftShadows;
for (int i = 0; i < visibleLights.Length && m_AdditionalShadowCastingLightIndices.Count < additionalLightsCount; ++i)
{
VisibleLight shadowLight = visibleLights[i];
// Skip main directional light as it is not packed into the shadow atlas
if (i == renderingData.lightData.mainLightIndex)
{
continue;
}
int shadowCastingLightIndex = m_AdditionalShadowCastingLightIndices.Count;
bool isValidShadowSlice = false;
if (renderingData.cullResults.GetShadowCasterBounds(i, out var bounds))
{
// We need to iterate the lights even though additional lights are disabled because
// cullResults.GetShadowCasterBounds() does the fence sync for the shadow culling jobs.
if (!renderingData.shadowData.supportsAdditionalLightShadows)
{
continue;
}
if (IsValidShadowCastingLight(ref renderingData.lightData, i))
{
bool success = ShadowUtils.ExtractSpotLightMatrix(ref renderingData.cullResults,
ref renderingData.shadowData,
i,
out var shadowTransform,
out m_AdditionalLightSlices[shadowCastingLightIndex].viewMatrix,
out m_AdditionalLightSlices[shadowCastingLightIndex].projectionMatrix);
if (success)
{
m_AdditionalShadowCastingLightIndices.Add(i);
var light = shadowLight.light;
float shadowStrength = light.shadowStrength;
float softShadows = (supportsSoftShadows && light.shadows == LightShadows.Soft) ? 1.0f : 0.0f;
Vector4 shadowParams = new Vector4(shadowStrength, softShadows, 0.0f, 0.0f);
if (m_UseStructuredBuffer)
{
m_AdditionalLightsShadowData[shadowCastingLightIndex].worldToShadowMatrix = shadowTransform;
m_AdditionalLightsShadowData[shadowCastingLightIndex].shadowParams = shadowParams;
}
else
{
m_AdditionalLightsWorldToShadow[shadowCastingLightIndex] = shadowTransform;
m_AdditionalLightsShadowParams[shadowCastingLightIndex] = shadowParams;
}
isValidShadowSlice = true;
validShadowCastingLights++;
}
}
}
if (m_UseStructuredBuffer)
{
// When using StructuredBuffers all the valid shadow casting slices data
// are stored in a the ShadowData buffer and then we setup a index map to
// map from light indices to shadow buffer index. A index map of -1 means
// the light is not a valid shadow casting light and there's no data for it
// in the shadow buffer.
int indexMap = (isValidShadowSlice) ? shadowCastingLightIndex : -1;
m_AdditionalShadowCastingLightIndicesMap.Add(indexMap);
}
else if (!isValidShadowSlice)
{
// When NOT using structured buffers we have no performant way to sample the
// index map as int[]. Unity shader compiler converts int[] to float4[] to force memory alignment.
// This makes indexing int[] arrays very slow. So, in order to avoid indexing shadow lights we
// setup slice data and reserve shadow map space even for invalid shadow slices.
// The data is setup with zero shadow strength. This has the same visual effect of no shadow
// attenuation contribution from this light.
// This makes sampling shadow faster but introduces waste in shadow map atlas.
// The waste increases with the amount of additional lights to shade.
// Therefore Universal RP try to keep the limit at sane levels when using uniform buffers.
Matrix4x4 identity = Matrix4x4.identity;
m_AdditionalShadowCastingLightIndices.Add(i);
m_AdditionalLightsWorldToShadow[shadowCastingLightIndex] = identity;
m_AdditionalLightsShadowParams[shadowCastingLightIndex] = Vector4.zero;
m_AdditionalLightSlices[shadowCastingLightIndex].viewMatrix = identity;
m_AdditionalLightSlices[shadowCastingLightIndex].projectionMatrix = identity;
}
m_ShadowCastingLightIndicesMap[i] = isValidShadowSlice ? shadowCastingLightIndex : -1;
}
// Lights that need to be rendered in the shadow map atlas
if (validShadowCastingLights == 0)
{
return(false);
}
int atlasWidth = renderingData.shadowData.additionalLightsShadowmapWidth;
int atlasHeight = renderingData.shadowData.additionalLightsShadowmapHeight;
int sliceResolution = ShadowUtils.GetMaxTileResolutionInAtlas(atlasWidth, atlasHeight, validShadowCastingLights);
// In the UI we only allow for square shadow map atlas. Here we check if we can fit
// all shadow slices into half resolution of the atlas and adjust height to have tighter packing.
int maximumSlices = (m_ShadowmapWidth / sliceResolution) * (m_ShadowmapHeight / sliceResolution);
if (validShadowCastingLights <= (maximumSlices / 2))
{
m_ShadowmapHeight /= 2;
}
int shadowSlicesPerRow = (atlasWidth / sliceResolution);
float oneOverAtlasWidth = 1.0f / m_ShadowmapWidth;
float oneOverAtlasHeight = 1.0f / m_ShadowmapHeight;
int sliceIndex = 0;
int shadowCastingLightsBufferCount = m_AdditionalShadowCastingLightIndices.Count;
Matrix4x4 sliceTransform = Matrix4x4.identity;
sliceTransform.m00 = sliceResolution * oneOverAtlasWidth;
sliceTransform.m11 = sliceResolution * oneOverAtlasHeight;
for (int i = 0; i < shadowCastingLightsBufferCount; ++i)
{
// we can skip the slice if strength is zero. Some slices with zero
// strength exists when using uniform array path.
if (!m_UseStructuredBuffer && Mathf.Approximately(m_AdditionalLightsShadowParams[i].x, 0.0f))
{
continue;
}
m_AdditionalLightSlices[i].offsetX = (sliceIndex % shadowSlicesPerRow) * sliceResolution;
m_AdditionalLightSlices[i].offsetY = (sliceIndex / shadowSlicesPerRow) * sliceResolution;
m_AdditionalLightSlices[i].resolution = sliceResolution;
sliceTransform.m03 = m_AdditionalLightSlices[i].offsetX * oneOverAtlasWidth;
sliceTransform.m13 = m_AdditionalLightSlices[i].offsetY * oneOverAtlasHeight;
// We bake scale and bias to each shadow map in the atlas in the matrix.
// saves some instructions in shader.
if (m_UseStructuredBuffer)
{
m_AdditionalLightsShadowData[i].worldToShadowMatrix = sliceTransform * m_AdditionalLightsShadowData[i].worldToShadowMatrix;
}
else
{
m_AdditionalLightsWorldToShadow[i] = sliceTransform * m_AdditionalLightsWorldToShadow[i];
}
sliceIndex++;
}
return(true);
}
