public PartTabPage(PrinterConfig printer, BedConfig sceneContext, ThemeConfig theme, string tabTitle)
: base(tabTitle)
{
this.sceneContext = sceneContext;
this.theme = theme;
this.BackgroundColor = theme.ActiveTabColor;
this.Padding = 0;
this.printer = printer;
bool isPrinterType = this is PrinterTabPage;
var favoritesBarAndView3DWidget = new FlowLayoutWidget()
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Stretch
};
viewControls3D = new ViewControls3D(sceneContext, theme, sceneContext.Scene.UndoBuffer, isPrinterType, !(this is PrinterTabPage))
{
VAnchor = VAnchor.Top | VAnchor.Fit,
HAnchor = HAnchor.Left | HAnchor.Stretch,
Visible = true,
};
theme.ApplyBottomBorder(viewControls3D, shadedBorder: (this is PrinterTabPage)); // Shade border if toolbar is secondary rather than primary
viewControls3D.ResetView += (sender, e) =>
{
if (view3DWidget.Visible)
{
this.view3DWidget.ResetView();
}
};
viewControls3D.ExtendOverflowMenu = this.GetViewControls3DOverflowMenu;
viewControls3D.OverflowButton.Name = "View3D Overflow Menu";
// The 3D model view
view3DWidget = new View3DWidget(
printer,
sceneContext,
viewControls3D,
theme,
this,
editorType: (isPrinterType) ? MeshViewerWidget.EditorType.Printer : MeshViewerWidget.EditorType.Part);
viewControls3D.SetView3DWidget(view3DWidget);
// Construct and store dictionary of menu actions accessible at workspace level
view3DWidget.WorkspaceActions = viewControls3D.MenuActions.Where(o => !string.IsNullOrEmpty(o.ID)).ToDictionary(o => o.ID, o => o);
this.AddChild(topToBottom = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Stretch
});
topToBottom.AddChild(leftToRight = new FlowLayoutWidget()
{
Name = "View3DContainerParent",
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Stretch
});
view3DContainer = new GuiWidget()
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Stretch
};
var toolbarAndView3DWidget = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Stretch
};
toolbarAndView3DWidget.AddChild(viewControls3D);
var dummyContext = new LibraryConfig()
{
ActiveContainer = ApplicationController.Instance.Library.ActiveContainer
};
var favoritesBar = new ListView(dummyContext, theme)
{
Name = "LibraryView",
// Drop containers
ContainerFilter = (container) => false,
BackgroundColor = theme.ActiveTabColor,
ListContentView = new IconListView(theme, 22),
Border = new BorderDouble(top: 1, right: 1),
BorderColor = theme.GetBorderColor(15),
HAnchor = HAnchor.Absolute,
Width = 33,
AllowContextMenu = false
};
favoritesBarAndView3DWidget.AddChild(favoritesBar);
favoritesBarAndView3DWidget.AddChild(view3DWidget);
toolbarAndView3DWidget.AddChild(favoritesBarAndView3DWidget);
view3DContainer.AddChild(toolbarAndView3DWidget);
leftToRight.AddChild(view3DContainer);
if (sceneContext.World.RotationMatrix == Matrix4X4.Identity)
{
this.view3DWidget.ResetView();
}
this.AnchorAll();
}
public PrinterConnectButton(PrinterConfig printer, ThemeConfig theme)
{
this.printer = printer;
this.HAnchor = HAnchor.Left | HAnchor.Fit;
this.VAnchor = VAnchor.Fit;
this.Margin = 0;
this.Padding = 0;
connectButton = new TextIconButton(
"Connect".Localize(),
AggContext.StaticData.LoadIcon("connect.png", 14, 14, theme.InvertIcons),
theme)
{
Name = "Connect to printer button",
ToolTipText = "Connect to the currently selected printer".Localize(),
MouseDownColor = theme.ToolbarButtonDown,
};
connectButton.Click += (s, e) =>
{
if (connectButton.Enabled)
{
if (printer.Settings.PrinterSelected)
{
UserRequestedConnectToActivePrinter();
}
}
};
this.AddChild(connectButton);
theme.ApplyPrimaryActionStyle(connectButton);
// add the cancel stop button
cancelConnectButton = new TextIconButton(
"Cancel".Localize(),
AggContext.StaticData.LoadIcon("connect.png", 14, 14, theme.InvertIcons),
theme)
{
ToolTipText = "Stop trying to connect to the printer.".Localize(),
BackgroundColor = theme.ToolbarButtonBackground,
HoverColor = theme.ToolbarButtonHover,
MouseDownColor = theme.ToolbarButtonDown,
};
cancelConnectButton.Click += (s, e) => UiThread.RunOnIdle(() =>
{
listenForConnectFailed = false;
ApplicationController.Instance.ConditionallyCancelPrint();
cancelConnectButton.Enabled = false;
});
this.AddChild(cancelConnectButton);
disconnectButton = new TextIconButton(
"Disconnect".Localize(),
AggContext.StaticData.LoadIcon("connect.png", 14, 14, theme.InvertIcons),
theme)
{
Name = "Disconnect from printer button",
Visible = false,
ToolTipText = "Disconnect from current printer".Localize(),
BackgroundColor = theme.ToolbarButtonBackground,
HoverColor = theme.ToolbarButtonHover,
MouseDownColor = theme.ToolbarButtonDown,
};
disconnectButton.Click += (s, e) => UiThread.RunOnIdle(() =>
{
if (printer.Connection.PrinterIsPrinting)
{
StyledMessageBox.ShowMessageBox(
(bool disconnectCancel) =>
{
if (disconnectCancel)
{
printer.Connection.Stop(false);
printer.Connection.Disable();
}
},
"WARNING: Disconnecting will stop the current print.\n\nAre you sure you want to disconnect?".Localize(),
"Disconnect and stop the current print?".Localize(),
StyledMessageBox.MessageType.YES_NO,
"Disconnect".Localize(),
"Stay Connected".Localize());
}
else
{
printer.Connection.Disable();
}
});
this.AddChild(disconnectButton);
foreach (var child in Children)
{
child.VAnchor = VAnchor.Center;
child.Cursor = Cursors.Hand;
child.Margin = theme.ButtonSpacing;
}
printer.Connection.EnableChanged.RegisterEvent((s, e) => SetVisibleStates(), ref unregisterEvents);
printer.Connection.CommunicationStateChanged.RegisterEvent((s, e) => SetVisibleStates(), ref unregisterEvents);
printer.Connection.ConnectionFailed.RegisterEvent((s, e) =>
{
#if !__ANDROID__
// TODO: Someday this functionality should be revised to an awaitable Connect() call in the Connect button that
// shows troubleshooting on failed attempts, rather than hooking the failed event and trying to determine if the
// Connect button started the task
if (listenForConnectFailed &&
UiThread.CurrentTimerMs - connectStartMs < 25000)
{
UiThread.RunOnIdle(() =>
{
// User initiated connect attempt failed, show port selection dialog
DialogWindow.Show(new SetupStepComPortOne(printer));
});
}
#endif
listenForConnectFailed = false;
}, ref unregisterEvents);
this.SetVisibleStates();
}
public WaitForTempStream(PrinterConfig printer, GCodeStream internalStream)
: base(printer, internalStream)
{
state = State.passthrough;
}
public ExtrusionMultiplyerStream(PrinterConfig printer, GCodeStream internalStream)
: base(printer, internalStream)
{
}
public PrinterTabPage(PrinterConfig printer, ThemeConfig theme, string tabTitle)
: base(printer, printer.Bed, theme, tabTitle)
{
gcodeOptions = sceneContext.RendererOptions;
view3DWidget.meshViewerWidget.EditorMode = MeshViewerWidget.EditorType.Printer;
viewControls3D.TransformStateChanged += (s, e) =>
{
switch (e.TransformMode)
{
case ViewControls3DButtons.Translate:
if (gcode2DWidget != null)
{
gcode2DWidget.TransformState = GCode2DWidget.ETransformState.Move;
}
break;
case ViewControls3DButtons.Scale:
if (gcode2DWidget != null)
{
gcode2DWidget.TransformState = GCode2DWidget.ETransformState.Scale;
}
break;
}
};
viewControls3D.ResetView += (sender, e) =>
{
if (gcode2DWidget?.Visible == true)
{
gcode2DWidget.CenterPartInView();
}
};
printer.ViewState.ViewModeChanged += ViewState_ViewModeChanged;
LayerScrollbar = new SliceLayerSelector(printer, sceneContext, theme)
{
VAnchor = VAnchor.Stretch,
HAnchor = HAnchor.Right | HAnchor.Fit,
Margin = new BorderDouble(0, 4, 4, 4),
Maximum = sceneContext.LoadedGCode?.LayerCount ?? 1
};
view3DWidget.InteractionLayer.AddChild(LayerScrollbar);
layerRenderRatioSlider = new DoubleSolidSlider(new Vector2(), SliceLayerSelector.SliderWidth);
layerRenderRatioSlider.FirstValue = 0;
layerRenderRatioSlider.FirstValueChanged += (s, e) =>
{
sceneContext.RenderInfo.FeatureToStartOnRatio0To1 = layerRenderRatioSlider.FirstValue;
sceneContext.RenderInfo.FeatureToEndOnRatio0To1 = layerRenderRatioSlider.SecondValue;
this.Invalidate();
};
layerRenderRatioSlider.SecondValue = 1;
layerRenderRatioSlider.SecondValueChanged += (s, e) =>
{
if (printer?.Bed?.RenderInfo != null)
{
sceneContext.RenderInfo.FeatureToStartOnRatio0To1 = layerRenderRatioSlider.FirstValue;
sceneContext.RenderInfo.FeatureToEndOnRatio0To1 = layerRenderRatioSlider.SecondValue;
}
this.Invalidate();
};
view3DWidget.InteractionLayer.AddChild(layerRenderRatioSlider);
sceneContext.LoadedGCodeChanged += BedPlate_LoadedGCodeChanged;
AddSettingsTabBar(leftToRight, view3DWidget);
view3DWidget.InteractionLayer.BoundsChanged += (s, e) =>
{
SetSliderSizes();
};
printerActionsBar = new PrinterActionsBar(printer, this, theme);
theme.ApplyBottomBorder(printerActionsBar);
printerActionsBar.modelViewButton.Enabled = sceneContext.EditableScene;
// Must come after we have an instance of View3DWidget an its undo buffer
topToBottom.AddChild(printerActionsBar, 0);
var trackball = view3DWidget.InteractionLayer.Children <TrackballTumbleWidget>().FirstOrDefault();
tumbleCubeControl = view3DWidget.InteractionLayer.Children <TumbleCubeControl>().FirstOrDefault();
var position = view3DWidget.InteractionLayer.Children.IndexOf(trackball);
gcodePanel = new GCodePanel(printer, sceneContext, theme)
{
Name = "GCode3DWidget",
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Stretch,
BackgroundColor = theme.InteractionLayerOverlayColor,
};
var modelViewSidePanel = view3DWidget.Descendants <VerticalResizeContainer>().FirstOrDefault();
gcodeContainer = new VerticalResizeContainer(theme, GrabBarSide.Left)
{
Width = printer?.ViewState.SelectedObjectPanelWidth ?? 200,
VAnchor = VAnchor.Stretch,
HAnchor = HAnchor.Absolute,
SpliterBarColor = theme.SplitterBackground,
SplitterWidth = theme.SplitterWidth,
Visible = false,
};
gcodeContainer.AddChild(gcodePanel);
gcodeContainer.Resized += (s, e) =>
{
if (printer != null)
{
printer.ViewState.SelectedObjectPanelWidth = gcodeContainer.Width;
}
};
modelViewSidePanel.BoundsChanged += (s, e) =>
{
gcodeContainer.Width = modelViewSidePanel.Width;
};
gcodeContainer.BoundsChanged += (s, e) =>
{
modelViewSidePanel.Width = gcodeContainer.Width;
};
var splitContainer = view3DWidget.FindNamedChildRecursive("SplitContainer");
splitContainer.AddChild(gcodeContainer);
view3DContainer.AddChild(new RunningTasksWidget(theme)
{
MinimumSize = new Vector2(100, 0),
Margin = new BorderDouble(top: printerActionsBar.Height),
VAnchor = VAnchor.Top | VAnchor.Fit,
HAnchor = HAnchor.Left | HAnchor.Fit,
});
// Create and append new widget
gcode2DWidget = new GCode2DWidget(printer, theme)
{
Visible = (printer.ViewState.ViewMode == PartViewMode.Layers2D)
};
view3DWidget.InteractionLayer.AddChild(gcode2DWidget, position + 1);
SetSliderSizes();
this.SetViewMode(printer.ViewState.ViewMode);
this.LayerScrollbar.Margin = LayerScrollbar.Margin.Clone(top: tumbleCubeControl.Height + tumbleCubeControl.Margin.Height + 4);
printer.ViewState.VisibilityChanged += ProcessOptionalTabs;
printer.Bed.RendererOptions.PropertyChanged += RendererOptions_PropertyChanged;
printer.Connection.CommunicationStateChanged.RegisterEvent((s, e) =>
{
this.SetSliderVisibility();
}, ref unregisterEvents);
}
public void Initialize(PrinterConfig printer)
{
}
private void CreateProductDataWidgets(PrinterSettings printerSettings, ProductSkuData product)
{
var row = new FlowLayoutWidget()
{
HAnchor = HAnchor.Stretch,
Margin = new BorderDouble(top: theme.DefaultContainerPadding)
};
productDataContainer.AddChild(row);
var image = new ImageBuffer(150, 10);
row.AddChild(new ImageWidget(image)
{
Margin = new BorderDouble(right: theme.DefaultContainerPadding),
VAnchor = VAnchor.Top
});
WebCache.RetrieveImageAsync(image, product.FeaturedImage.ImageUrl, scaleToImageX: true);
var descriptionBackground = new GuiWidget()
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit | VAnchor.Top,
Padding = theme.DefaultContainerPadding
};
var description = new MarkdownWidget(theme)
{
MinimumSize = new VectorMath.Vector2(350, 0),
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit,
Markdown = product.ProductDescription.Trim()
};
descriptionBackground.AddChild(description);
descriptionBackground.BeforeDraw += (s, e) =>
{
var rect = new RoundedRect(descriptionBackground.LocalBounds, 3);
e.Graphics2D.Render(rect, theme.SlightShade);
};
row.AddChild(descriptionBackground);
var padding = theme.DefaultContainerPadding;
var addonsColumn = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
Padding = new BorderDouble(padding, padding, padding, 0),
HAnchor = HAnchor.Stretch
};
var addonsSection = new SectionWidget("Upgrades and Accessories", addonsColumn, theme);
productDataContainer.AddChild(addonsSection);
theme.ApplyBoxStyle(addonsSection);
addonsSection.Margin = addonsSection.Margin.Clone(left: 0);
foreach (var item in product.ProductListing.AddOns)
{
var icon = new ImageBuffer(80, 0);
WebCache.RetrieveImageAsync(icon, item.FeaturedImage.ImageUrl, scaleToImageX: true);
var addOnRow = new AddOnRow(item.AddOnTitle, theme, null, icon)
{
HAnchor = HAnchor.Stretch,
Cursor = Cursors.Hand
};
foreach (var child in addOnRow.Children)
{
child.Selectable = false;
}
addOnRow.Click += (s, e) =>
{
ApplicationController.Instance.LaunchBrowser($"https://www.matterhackers.com/store/l/{item.AddOnListingReference}/sk/{item.AddOnSkuReference}");
};
addonsColumn.AddChild(addOnRow);
}
if (false)
{
var settingsPanel = new GuiWidget()
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Stretch,
MinimumSize = new VectorMath.Vector2(20, 20),
DebugShowBounds = true
};
settingsPanel.Load += (s, e) =>
{
var printer = new PrinterConfig(printerSettings);
var settingsContext = new SettingsContext(
printer,
null,
NamedSettingsLayers.All);
settingsPanel.AddChild(
new ConfigurePrinterWidget(settingsContext, printer, theme)
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Stretch,
});
};
this.AddChild(new SectionWidget("Settings", settingsPanel, theme, expanded: false, setContentVAnchor: false)
{
VAnchor = VAnchor.Stretch
});
}
}
public static List <(Matrix4X4 matrix, string fileName)> GetStlFileLocations(IObject3D object3D, ref string mergeRules, PrinterConfig printer, IProgress <ProgressStatus> progressReporter, CancellationToken cancellationToken)
{
var progressStatus = new ProgressStatus();
extrudersUsed.Clear();
int extruderCount = printer.Settings.GetValue <int>(SettingsKey.extruder_count);
for (int extruderIndex = 0; extruderIndex < extruderCount; extruderIndex++)
{
extrudersUsed.Add(false);
}
// If we have support enabled and are using an extruder other than 0 for it
if (printer.Settings.GetValue <bool>("support_material"))
{
if (printer.Settings.GetValue <int>("support_material_extruder") != 0)
{
int supportExtruder = Math.Max(0, Math.Min(printer.Settings.GetValue <int>(SettingsKey.extruder_count) - 1, printer.Settings.GetValue <int>("support_material_extruder") - 1));
extrudersUsed[supportExtruder] = true;
}
}
// If we have raft enabled and are using an extruder other than 0 for it
if (printer.Settings.GetValue <bool>("create_raft"))
{
if (printer.Settings.GetValue <int>("raft_extruder") != 0)
{
int raftExtruder = Math.Max(0, Math.Min(printer.Settings.GetValue <int>(SettingsKey.extruder_count) - 1, printer.Settings.GetValue <int>("raft_extruder") - 1));
extrudersUsed[raftExtruder] = true;
}
}
{
// TODO: Once graph parsing is added to MatterSlice we can remove and avoid this flattening
meshPrintOutputSettings.Clear();
// Flatten the scene, filtering out items outside of the build volume
var meshItemsOnBuildPlate = printer.PrintableItems(object3D);
if (meshItemsOnBuildPlate.Any())
{
int maxExtruderIndex = 0;
var itemsByExtruder = new List <IEnumerable <IObject3D> >();
for (int extruderIndexIn = 0; extruderIndexIn < extruderCount; extruderIndexIn++)
{
var extruderIndex = extruderIndexIn;
var itemsThisExtruder = meshItemsOnBuildPlate.Where((item) =>
(File.Exists(item.MeshPath) || // Drop missing files
File.Exists(Path.Combine(Object3D.AssetsPath, item.MeshPath))) &&
(item.WorldMaterialIndex() == extruderIndex ||
(extruderIndex == 0 &&
(item.WorldMaterialIndex() >= extruderCount || item.WorldMaterialIndex() == -1))) &&
(item.WorldOutputType() == PrintOutputTypes.Solid || item.WorldOutputType() == PrintOutputTypes.Default));
itemsByExtruder.Add(itemsThisExtruder);
extrudersUsed[extruderIndex] |= itemsThisExtruder.Any();
if (extrudersUsed[extruderIndex])
{
maxExtruderIndex = extruderIndex;
}
}
var outputOptions = new List <(Matrix4X4 matrix, string fileName)>();
int savedStlCount = 0;
bool first = true;
for (int extruderIndex = 0; extruderIndex < itemsByExtruder.Count; extruderIndex++)
{
if (!first)
{
mergeRules += ",";
first = false;
}
mergeRules += AddObjectsForExtruder(itemsByExtruder[extruderIndex], outputOptions, ref savedStlCount);
}
var supportObjects = meshItemsOnBuildPlate.Where((item) => item.WorldOutputType() == PrintOutputTypes.Support);
// if we added user generated support
if (supportObjects.Any())
{
// add a flag to the merge rules to let us know there was support
mergeRules += "," + AddObjectsForExtruder(supportObjects, outputOptions, ref savedStlCount) + "S";
}
mergeRules += " ";
return(outputOptions);
}
}
return(new List <(Matrix4X4 matrix, string fileName)>());
}
public SliceSettingsRow(PrinterConfig printer, SettingsContext settingsContext, SliceSettingData settingData, ThemeConfig theme, bool fullRowSelect = false)
: base(settingData.PresentationName.Localize(), settingData.HelpText.Localize(), theme, fullRowSelect: fullRowSelect)
{
this.printer = printer;
this.settingData = settingData;
this.settingsContext = settingsContext;
using (this.LayoutLock())
{
this.AddChild(dataArea = new FlowLayoutWidget
{
VAnchor = VAnchor.Fit | VAnchor.Center,
DebugShowBounds = debugLayout
});
this.AddChild(unitsArea = new GuiWidget()
{
HAnchor = HAnchor.Absolute,
VAnchor = VAnchor.Fit | VAnchor.Center,
Width = 50 * GuiWidget.DeviceScale,
DebugShowBounds = debugLayout
});
// Populate unitsArea as appropriate
// List elements contain list values in the field which normally contains label details, skip generation of invalid labels
if (settingData.DataEditType != SliceSettingData.DataEditTypes.LIST &&
settingData.DataEditType != SliceSettingData.DataEditTypes.HARDWARE_PRESENT)
{
unitsArea.AddChild(
new WrappedTextWidget(settingData.Units.Localize(), pointSize: theme.FontSize8, textColor: theme.TextColor)
{
Margin = new BorderDouble(5, 0),
});
}
restoreArea = new GuiWidget()
{
HAnchor = HAnchor.Absolute,
VAnchor = VAnchor.Fit | VAnchor.Center,
Width = 20 * GuiWidget.DeviceScale,
DebugShowBounds = debugLayout
};
this.AddChild(restoreArea);
this.Name = settingData.SlicerConfigName + " Row";
if (settingData.ShowAsOverride)
{
restoreButton = theme.CreateSmallResetButton();
restoreButton.HAnchor = HAnchor.Right;
restoreButton.Margin = 0;
restoreButton.Name = "Restore " + settingData.SlicerConfigName;
restoreButton.ToolTipText = "Restore Default".Localize();
restoreButton.Click += (sender, e) =>
{
// Revert the user override
settingsContext.ClearValue(settingData.SlicerConfigName);
};
restoreArea.AddChild(restoreButton);
restoreArea.Selectable = true;
}
}
this.PerformLayout();
}
public PrinterConnectButton(PrinterConfig printer, ThemeConfig theme)
{
this.printer = printer;
this.HAnchor = HAnchor.Left | HAnchor.Fit;
this.VAnchor = VAnchor.Fit;
this.Margin = 0;
this.Padding = 0;
connectButton = new TextIconButton(
"Connect".Localize(),
StaticData.Instance.LoadIcon("connect.png", 14, 14, theme.InvertIcons),
theme)
{
Name = "Connect to printer button",
ToolTipText = "Connect to the currently selected printer".Localize(),
MouseDownColor = theme.ToolbarButtonDown,
};
connectButton.Click += (s, e) =>
{
if (connectButton.Enabled)
{
ApplicationController.Instance.ConnectToPrinter(printer);
}
};
this.AddChild(connectButton);
theme.ApplyPrimaryActionStyle(connectButton);
// add the cancel stop button
cancelConnectButton = new TextIconButton(
"Cancel".Localize(),
StaticData.Instance.LoadIcon("connect.png", 14, 14, theme.InvertIcons),
theme)
{
ToolTipText = "Stop trying to connect to the printer.".Localize(),
BackgroundColor = theme.ToolbarButtonBackground,
HoverColor = theme.ToolbarButtonHover,
MouseDownColor = theme.ToolbarButtonDown,
};
cancelConnectButton.Click += (s, e) => UiThread.RunOnIdle(() =>
{
printer.CancelPrint();
cancelConnectButton.Enabled = false;
});
this.AddChild(cancelConnectButton);
disconnectButton = new TextIconButton(
"Disconnect".Localize(),
StaticData.Instance.LoadIcon("connect.png", 14, 14, theme.InvertIcons),
theme)
{
Name = "Disconnect from printer button",
Visible = false,
ToolTipText = "Disconnect from current printer".Localize(),
BackgroundColor = theme.ToolbarButtonBackground,
HoverColor = theme.ToolbarButtonHover,
MouseDownColor = theme.ToolbarButtonDown,
};
disconnectButton.Click += (s, e) => UiThread.RunOnIdle(() =>
{
if (printer.Connection.Printing)
{
StyledMessageBox.ShowMessageBox(
(bool disconnectCancel) =>
{
if (disconnectCancel)
{
printer.Connection.Stop(false);
printer.Connection.Disable();
}
},
"WARNING: Disconnecting will stop the current print.\n\nAre you sure you want to disconnect?".Localize(),
"Disconnect and stop the current print?".Localize(),
StyledMessageBox.MessageType.YES_NO,
"Disconnect".Localize(),
"Stay Connected".Localize());
}
else
{
printer.Connection.Disable();
}
});
this.AddChild(disconnectButton);
foreach (var child in Children)
{
child.VAnchor = VAnchor.Center;
child.Cursor = Cursors.Hand;
child.Margin = theme.ButtonSpacing;
}
// Register listeners
printer.Connection.CommunicationStateChanged += Connection_CommunicationStateChanged;
this.SetVisibleStates();
}
private AdjustmentControls(PrinterConfig printer, ThemeConfig theme)
: base(FlowDirection.TopToBottom)
{
double sliderWidth = 300 * GuiWidget.DeviceScale;
double sliderThumbWidth = 10 * GuiWidget.DeviceScale;
this.printer = printer;
SettingsRow settingsRow;
{
this.AddChild(settingsRow = new SettingsRow(
"Speed Multiplier".Localize(),
null,
theme));
// Remove the HorizontalSpacer
settingsRow.Children.Last().Close();
feedRateRatioSlider = new SolidSlider(default(Vector2), sliderThumbWidth, theme, minFeedRateRatio, maxFeedRateRatio)
{
Name = "Feed Rate Slider",
Margin = new BorderDouble(5, 0),
Value = printer.Settings.GetValue <double>(SettingsKey.feedrate_ratio),
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Center,
TotalWidthInPixels = sliderWidth,
};
theme.ApplySliderStyle(feedRateRatioSlider);
feedRateRatioSlider.ValueChanged += (sender, e) =>
{
feedRateValue.ActuallNumberEdit.Value = Math.Round(feedRateRatioSlider.Value, 2);
};
feedRateRatioSlider.SliderReleased += (s, e) =>
{
// Update state for runtime use
printer.Connection.FeedRateMultiplierStream.FeedRateRatio = Math.Round(feedRateRatioSlider.Value, 2);
// Persist data for future use
printer.Settings.SetValue(
SettingsKey.feedrate_ratio,
printer.Connection.FeedRateMultiplierStream.FeedRateRatio.ToString());
};
settingsRow.AddChild(feedRateRatioSlider);
feedRateValue = new MHNumberEdit(Math.Round(printer.Settings.GetValue <double>(SettingsKey.feedrate_ratio), 2), theme, allowDecimals: true, minValue: minFeedRateRatio, maxValue: maxFeedRateRatio, pixelWidth: 40 * GuiWidget.DeviceScale)
{
Name = "Feed Rate NumberEdit",
SelectAllOnFocus = true,
Margin = new BorderDouble(0, 0, 5, 0),
VAnchor = VAnchor.Center | VAnchor.Fit,
};
feedRateValue.ActuallNumberEdit.EditComplete += (sender, e) =>
{
feedRateRatioSlider.Value = feedRateValue.ActuallNumberEdit.Value;
// Update state for runtime use
printer.Connection.FeedRateMultiplierStream.FeedRateRatio = Math.Round(feedRateRatioSlider.Value, 2);
// Persist data for future use
printer.Settings.SetValue(
SettingsKey.feedrate_ratio,
printer.Connection.FeedRateMultiplierStream.FeedRateRatio.ToString());
};
settingsRow.AddChild(feedRateValue);
}
{
this.AddChild(settingsRow = new SettingsRow(
"Extrusion Multiplier".Localize(),
null,
theme));
// Remove the HorizontalSpacer
settingsRow.Children.Last().Close();
extrusionRatioSlider = new SolidSlider(default(Vector2), sliderThumbWidth, theme, minExtrutionRatio, maxExtrusionRatio, Orientation.Horizontal)
{
Name = "Extrusion Multiplier Slider",
TotalWidthInPixels = sliderWidth,
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Center,
Margin = new BorderDouble(5, 0),
Value = printer.Settings.GetValue <double>(SettingsKey.extrusion_ratio)
};
theme.ApplySliderStyle(extrusionRatioSlider);
extrusionRatioSlider.ValueChanged += (sender, e) =>
{
extrusionValue.ActuallNumberEdit.Value = Math.Round(extrusionRatioSlider.Value, 2);
};
extrusionRatioSlider.SliderReleased += (s, e) =>
{
// Update state for runtime use
printer.Connection.ExtrusionMultiplierStream.ExtrusionRatio = Math.Round(extrusionRatioSlider.Value, 2);
// Persist data for future use
printer.Settings.SetValue(
SettingsKey.extrusion_ratio,
printer.Connection.ExtrusionMultiplierStream.ExtrusionRatio.ToString());
};
settingsRow.AddChild(extrusionRatioSlider);
extrusionValue = new MHNumberEdit(Math.Round(printer.Settings.GetValue <double>(SettingsKey.extrusion_ratio), 2), theme, allowDecimals: true, minValue: minExtrutionRatio, maxValue: maxExtrusionRatio, pixelWidth: 40 * GuiWidget.DeviceScale)
{
Name = "Extrusion Multiplier NumberEdit",
SelectAllOnFocus = true,
Margin = new BorderDouble(0, 0, 5, 0),
VAnchor = VAnchor.Center | VAnchor.Fit,
};
extrusionValue.ActuallNumberEdit.EditComplete += (sender, e) =>
{
extrusionRatioSlider.Value = extrusionValue.ActuallNumberEdit.Value;
// Update state for runtime use
printer.Connection.ExtrusionMultiplierStream.ExtrusionRatio = Math.Round(extrusionRatioSlider.Value, 2);
// Persist data for future use
printer.Settings.SetValue(
SettingsKey.extrusion_ratio,
printer.Connection.ExtrusionMultiplierStream.ExtrusionRatio.ToString());
};
settingsRow.AddChild(extrusionValue);
}
// Register listeners
printer.Settings.SettingChanged += Printer_SettingChanged;
printer.Disposed += (s, e) => printer.Settings.SettingChanged -= Printer_SettingChanged;
}
public UnloadFilamentWizard(PrinterConfig printer, int extruderIndex)
: base(printer)
{
this.Title = "Unload Filament".Localize();
this.extruderIndex = extruderIndex;
}
public GCodeStreamProxy(PrinterConfig printer, GCodeStream internalStream)
: base(printer)
{
this.internalStream = internalStream;
}
public Slice3rBedShape(PrinterConfig printer, string canonicalSettingsName)
: base(printer, canonicalSettingsName, canonicalSettingsName)
{
}
public PrinterActionsBar(PrinterConfig printer, PrinterTabPage printerTabPage, ThemeConfig theme)
: base(theme)
{
this.printer = printer;
this.printerTabPage = printerTabPage;
this.HAnchor = HAnchor.Stretch;
this.VAnchor = VAnchor.Fit;
var defaultMargin = theme.ButtonSpacing;
var printerType = printer.Settings.Slicer.PrinterType;
if (printerType == PrinterType.FFF)
{
// add the reset button first (if there is one)
if (printer.Settings.GetValue <bool>(SettingsKey.show_reset_connection))
{
var resetConnectionButton = new TextIconButton(
"Reset".Localize(),
StaticData.Instance.LoadIcon("e_stop.png", 14, 14).SetToColor(theme.TextColor),
theme)
{
ToolTipText = "Reboots the firmware on the controller".Localize(),
Margin = defaultMargin
};
resetConnectionButton.Click += (s, e) =>
{
UiThread.RunOnIdle(printer.Connection.RebootBoard);
};
this.AddChild(resetConnectionButton);
}
this.AddChild(new PrinterConnectButton(printer, theme));
// add the start print button
GuiWidget startPrintButton;
this.AddChild(startPrintButton = new PrintPopupMenu(printer, theme)
{
Margin = theme.ButtonSpacing
});
void SetPrintButtonStyle(object s, EventArgs e)
{
switch (printer.Connection.CommunicationState)
{
case CommunicationStates.FinishedPrint:
case CommunicationStates.Connected:
theme.ApplyPrimaryActionStyle(startPrintButton);
break;
default:
theme.RemovePrimaryActionStyle(startPrintButton);
break;
}
}
// make sure the buttons state is set correctly
printer.Connection.CommunicationStateChanged += SetPrintButtonStyle;
startPrintButton.Closed += (s, e) => printer.Connection.CommunicationStateChanged -= SetPrintButtonStyle;
// and set the style right now
SetPrintButtonStyle(this, null);
}
else
{
var exportButton = new ExportSlaPopupMenu(printer, theme)
{
Margin = theme.ButtonSpacing
};
// add the SLA export button
this.AddChild(exportButton);
theme.ApplyPrimaryActionStyle(exportButton);
}
this.AddChild(new SliceButton(printer, printerTabPage, theme)
{
Name = "Generate Gcode Button",
Margin = theme.ButtonSpacing,
});
// Add vertical separator
this.AddChild(new ToolbarSeparator(theme.GetBorderColor(50), theme.SeparatorMargin)
{
VAnchor = VAnchor.Absolute,
Height = theme.ButtonHeight,
});
var buttonGroupB = new ObservableCollection <GuiWidget>();
var iconPath = Path.Combine("ViewTransformControls", "model.png");
modelViewButton = new RadioIconButton(StaticData.Instance.LoadIcon(iconPath, 16, 16).SetToColor(theme.TextColor), theme)
{
SiblingRadioButtonList = buttonGroupB,
Name = "Model View Button",
Checked = printer?.ViewState.ViewMode == PartViewMode.Model || printer == null,
ToolTipText = "Model View".Localize(),
BackgroundRadius = theme.ButtonRadius,
Margin = theme.ButtonSpacing
};
modelViewButton.Click += SwitchModes_Click;
buttonGroupB.Add(modelViewButton);
AddChild(modelViewButton);
viewModes.Add(PartViewMode.Model, modelViewButton);
iconPath = Path.Combine("ViewTransformControls", "gcode_3d.png");
layers3DButton = new RadioIconButton(StaticData.Instance.LoadIcon(iconPath, 16, 16).SetToColor(theme.TextColor), theme)
{
SiblingRadioButtonList = buttonGroupB,
Name = "Layers3D Button",
Checked = printer?.ViewState.ViewMode == PartViewMode.Layers3D,
ToolTipText = "3D Layer View".Localize(),
BackgroundRadius = theme.ButtonRadius,
Margin = theme.ButtonSpacing
};
layers3DButton.Click += SwitchModes_Click;
buttonGroupB.Add(layers3DButton);
viewModes.Add(PartViewMode.Layers3D, layers3DButton);
this.AddChild(layers3DButton);
iconPath = Path.Combine("ViewTransformControls", "gcode_2d.png");
layers2DButton = new RadioIconButton(StaticData.Instance.LoadIcon(iconPath, 16, 16).SetToColor(theme.TextColor), theme)
{
SiblingRadioButtonList = buttonGroupB,
Name = "Layers2D Button",
Checked = printer?.ViewState.ViewMode == PartViewMode.Layers2D,
ToolTipText = "2D Layer View".Localize(),
BackgroundRadius = theme.ButtonRadius,
Margin = theme.ButtonSpacing,
};
layers2DButton.Click += SwitchModes_Click;
buttonGroupB.Add(layers2DButton);
this.AddChild(layers2DButton);
viewModes.Add(PartViewMode.Layers2D, layers2DButton);
this.AddChild(new HorizontalSpacer());
if (printerType == PrinterType.FFF)
{
int hotendCount = printer.Settings.Helpers.HotendCount();
for (int extruderIndex = 0; extruderIndex < hotendCount; extruderIndex++)
{
this.AddChild(new TemperatureWidgetHotend(printer, extruderIndex, theme, hotendCount)
{
Margin = new BorderDouble(right: 10)
});
}
if (printer.Settings.GetValue <bool>(SettingsKey.has_heated_bed))
{
this.AddChild(new TemperatureWidgetBed(printer, theme));
}
// Register listeners
printer.Connection.ConnectionSucceeded += CheckForPrintRecovery;
// if we are already connected than check if there is a print recovery right now
if (printer.Connection.CommunicationState == CommunicationStates.Connected)
{
CheckForPrintRecovery(null, null);
}
}
this.OverflowButton.Name = "Printer Overflow Menu";
this.OverflowButton.ToolTipText = "Printer Options".Localize();
this.ExtendOverflowMenu = (popupMenu) =>
{
this.GeneratePrinterOverflowMenu(popupMenu, ApplicationController.Instance.MenuTheme);
};
printer.ViewState.ViewModeChanged += (s, e) =>
{
if (viewModes[e.ViewMode] is RadioIconButton activeButton &&
viewModes[e.PreviousMode] is RadioIconButton previousButton &&
!buttonIsBeingClicked)
{
// Show slide to animation from previous to current, on completion update view to current by setting active.Checked
previousButton.SlideToNewState(
activeButton,
this,
() =>
{
activeButton.Checked = true;
},
theme);
}
};
}
public PrintPopupMenu(PrinterConfig printer, ThemeConfig theme)
{
this.printer = printer;
this.DrawArrow = true;
this.BackgroundColor = theme.ToolbarButtonBackground;
this.HoverColor = theme.ToolbarButtonHover;
this.MouseDownColor = theme.ToolbarButtonDown;
this.Name = "PrintPopupMenu";
this.HAnchor = HAnchor.Fit;
this.VAnchor = VAnchor.Fit;
settingsContext = new SettingsContext(printer, null, NamedSettingsLayers.All);
this.DynamicPopupContent = () =>
{
var menuTheme = ApplicationController.Instance.MenuTheme;
int tabIndex = 0;
allUiFields.Clear();
var column = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
Padding = 10,
BackgroundColor = menuTheme.Colors.PrimaryBackgroundColor
};
column.AddChild(new TextWidget("Options".Localize(), textColor: menuTheme.Colors.PrimaryTextColor)
{
HAnchor = HAnchor.Left
});
var optionsPanel = new IgnoredFlowLayout()
{
Name = "PrintPopupMenu Panel",
HAnchor = HAnchor.Fit | HAnchor.Left,
VAnchor = VAnchor.Fit,
Padding = 5,
MinimumSize = new Vector2(400, 65),
Margin = new BorderDouble(top: 10),
};
column.AddChild(optionsPanel);
foreach (var key in new[] { "layer_height", "fill_density", "support_material", "create_raft" })
{
var settingsData = SettingsOrganizer.Instance.GetSettingsData(key);
var row = SliceSettingsTabView.CreateItemRow(settingsData, settingsContext, printer, menuTheme, ref tabIndex, allUiFields);
SliceSettingsRow.AddBordersToEditFields(row);
optionsPanel.AddChild(row);
}
var subPanel = new FlowLayoutWidget(FlowDirection.TopToBottom);
var sectionWidget = new SectionWidget("Advanced", subPanel, menuTheme, expanded: true)
{
Name = "Advanced Section",
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit,
Margin = 0
};
column.AddChild(sectionWidget);
bool anySettingOverridden = false;
anySettingOverridden |= printer.Settings.GetValue <bool>(SettingsKey.spiral_vase);
anySettingOverridden |= !string.IsNullOrWhiteSpace(printer.Settings.GetValue(SettingsKey.layer_to_pause));
sectionWidget.Load += (s, e) =>
{
sectionWidget.Checkbox.Checked = anySettingOverridden;
};
foreach (var key in new[] { SettingsKey.spiral_vase, SettingsKey.layer_to_pause })
{
var settingsData = SettingsOrganizer.Instance.GetSettingsData(key);
var row = SliceSettingsTabView.CreateItemRow(settingsData, settingsContext, printer, menuTheme, ref tabIndex, allUiFields);
SliceSettingsRow.AddBordersToEditFields(row);
subPanel.AddChild(row);
}
theme.ApplyBoxStyle(sectionWidget);
sectionWidget.Margin = new BorderDouble(0, 10);
sectionWidget.ContentPanel.Children <SettingsRow>().First().Border = new BorderDouble(0, 1);
sectionWidget.ContentPanel.Children <SettingsRow>().Last().Border = 0;
var button = new TextButton("Start Print".Localize(), menuTheme)
{
Name = "Start Print Button",
HAnchor = HAnchor.Right,
VAnchor = VAnchor.Absolute,
};
button.Click += (s, e) =>
{
if (!printer.Bed.Scene.Children.Any())
{
return;
}
UiThread.RunOnIdle(async() =>
{
// Save any pending changes before starting print operation
await ApplicationController.Instance.Tasks.Execute("Saving Changes".Localize(), printer.Bed.SaveChanges);
await ApplicationController.Instance.PrintPart(
printer.Bed.EditContext,
printer,
null,
CancellationToken.None);
});
};
column.AddChild(button);
theme.ApplyPrimaryActionStyle(button);
return(column);
};
this.AddChild(new TextButton("Print".Localize(), theme)
{
Selectable = false,
Padding = theme.TextButtonPadding.Clone(right: 5)
});
ActiveSliceSettings.SettingChanged.RegisterEvent((s, e) =>
{
if (e is StringEventArgs stringEvent)
{
string settingsKey = stringEvent.Data;
if (allUiFields.TryGetValue(settingsKey, out UIField uifield))
{
string currentValue = settingsContext.GetValue(settingsKey);
if (uifield.Value != currentValue ||
settingsKey == "com_port")
{
uifield.SetValue(
currentValue,
userInitiated: false);
}
}
}
},
ref unregisterEvents);
}
public SetupStepComPortOne(PrinterConfig printer)
{
this.WindowTitle = "Setup Wizard".Localize();
var container = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
VAnchor = VAnchor.Stretch,
Margin = new BorderDouble(5),
HAnchor = HAnchor.Stretch
};
var elementMargin = new BorderDouble(top: 5);
var printerMessageOne = new TextWidget("MatterControl will now attempt to auto-detect printer.".Localize(), 0, 0, 10)
{
TextColor = theme.TextColor,
HAnchor = HAnchor.Stretch,
Margin = elementMargin
};
container.AddChild(printerMessageOne);
var printerMessageTwo = new TextWidget(string.Format("1.) {0} ({1}).", "Disconnect printer".Localize(), "if currently connected".Localize()), 0, 0, 12)
{
TextColor = theme.TextColor,
HAnchor = HAnchor.Stretch,
Margin = elementMargin
};
container.AddChild(printerMessageTwo);
var printerMessageThree = new TextWidget(string.Format("2.) {0} '{1}'.", "Press".Localize(), "Continue".Localize()), 0, 0, 12)
{
TextColor = theme.TextColor,
HAnchor = HAnchor.Stretch,
Margin = elementMargin
};
container.AddChild(printerMessageThree);
var removeImage = StaticData.Instance.LoadImage(Path.Combine("Images", "remove usb.png"));
removeImage.SetRecieveBlender(new BlenderPreMultBGRA());
container.AddChild(new ImageWidget(removeImage)
{
HAnchor = HAnchor.Center,
Margin = new BorderDouble(0, 10),
});
GuiWidget vSpacer = new GuiWidget();
vSpacer.VAnchor = VAnchor.Stretch;
container.AddChild(vSpacer);
var setupManualConfigurationOrSkipConnectionWidget = new TextWidget("You can also".Localize() + ":", 0, 0, 10)
{
TextColor = theme.TextColor,
HAnchor = HAnchor.Stretch,
Margin = elementMargin
};
container.AddChild(setupManualConfigurationOrSkipConnectionWidget);
var manualLink = new LinkLabel("Manually Configure Connection".Localize(), theme)
{
Margin = new BorderDouble(0, 5),
TextColor = theme.TextColor
};
manualLink.Click += (s, e) => UiThread.RunOnIdle(() =>
{
DialogWindow.ChangeToPage(new SetupStepComPortManual(printer));
});
container.AddChild(manualLink);
var printerMessageFour = new TextWidget("or".Localize(), 0, 0, 10)
{
TextColor = theme.TextColor,
HAnchor = HAnchor.Stretch,
Margin = elementMargin
};
container.AddChild(printerMessageFour);
var skipConnectionLink = new LinkLabel("Skip Connection Setup".Localize(), theme)
{
Margin = new BorderDouble(0, 8),
TextColor = theme.TextColor
};
skipConnectionLink.Click += (s, e) =>
{
printer.Connection.HaltConnectionThread();
Parent.Close();
};
container.AddChild(skipConnectionLink);
contentRow.AddChild(container);
// Construct buttons
var nextButton = theme.CreateDialogButton("Continue".Localize());
nextButton.Click += (s, e) =>
{
DialogWindow.ChangeToPage(new SetupStepComPortTwo(printer));
};
this.AddPageAction(nextButton);
}
public static string FilamentUsed(this GCodeFile loadedGCode, PrinterConfig printer)
{
return(string.Format("{0:0.0} mm", loadedGCode.GetFilamentUsedMm(printer.Settings.GetValue <double>(SettingsKey.filament_diameter))));
}
public ProcessWriteRegexStream(PrinterConfig printer, GCodeStream internalStream, QueuedCommandsStream queueStream)
: base(printer, internalStream)
{
this.queueStream = queueStream;
}
public static string FilamentVolume(this GCodeFile loadedGCode, PrinterConfig printer)
{
return(string.Format("{0:0.00} cm³", loadedGCode.GetFilamentCubicMm(printer.Settings.GetValue <double>(SettingsKey.filament_diameter)) / 1000));
}
public PauseHandlingStream(PrinterConfig printer, GCodeStream internalStream)
: base(printer, internalStream)
{
// if we have a runout sensor, register to listen for lines to check it
if (printer.Settings.GetValue <bool>(SettingsKey.filament_runout_sensor))
{
printer.Connection.LineReceived += (s, line) =>
{
if (line != null)
{
if (line.Contains("ros_"))
{
if (line.Contains("TRIGGERED"))
{
readOutOfFilament = true;
}
}
if (line.Contains("pos_"))
{
double sensorDistance = 0;
double stepperDistance = 0;
if (GCodeFile.GetFirstNumberAfter("SENSOR:", line, ref sensorDistance))
{
if (sensorDistance < -1 || sensorDistance > 1)
{
printer.Connection.FilamentPositionSensorDetected = true;
}
if (printer.Connection.FilamentPositionSensorDetected)
{
GCodeFile.GetFirstNumberAfter("STEPPER:", line, ref stepperDistance);
var stepperDelta = Math.Abs(stepperDistance - positionSensorData.LastStepperDistance);
// if we think we should have move the filament by more than 1mm
if (stepperDelta > 1)
{
var sensorDelta = Math.Abs(sensorDistance - positionSensorData.LastSensorDistance);
// check if the sensor data is within a tolerance of the stepper data
var deltaRatio = sensorDelta / stepperDelta;
if (deltaRatio < .5 || deltaRatio > 2)
{
// we have a repartable discrepency set a runout state
positionSensorData.ExtrusionDiscrepency++;
if (positionSensorData.ExtrusionDiscrepency > 2)
{
readOutOfFilament = true;
positionSensorData.ExtrusionDiscrepency = 0;
}
}
else
{
positionSensorData.ExtrusionDiscrepency = 0;
}
// and recard this position
positionSensorData.LastSensorDistance = sensorDistance;
positionSensorData.LastStepperDistance = stepperDistance;
}
}
}
}
}
};
}
}
public static string EstimatedCost(this GCodeFile loadedGCode, PrinterConfig printer)
{
var totalMass = TotalCost(loadedGCode, printer);
return(totalMass <= 0 ? "Unknown" : string.Format("${0:0.00}", totalMass));
}
public static GuiWidget PrintProgressWidget(PrinterConfig printer, ThemeConfig theme)
{
var bodyRow = new GuiWidget()
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Top | VAnchor.Fit,
//BackgroundColor = new Color(theme.Colors.PrimaryBackgroundColor, 128),
MinimumSize = new Vector2(275, 140),
};
// Progress section
var expandingContainer = new HorizontalSpacer()
{
VAnchor = VAnchor.Fit | VAnchor.Center
};
bodyRow.AddChild(expandingContainer);
var progressContainer = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
VAnchor = VAnchor.Center | VAnchor.Fit,
HAnchor = HAnchor.Stretch,
};
expandingContainer.AddChild(progressContainer);
var progressDial = new ProgressDial()
{
HAnchor = HAnchor.Center,
Height = 200 * DeviceScale,
Width = 200 * DeviceScale
};
progressContainer.AddChild(progressDial);
var bottomRow = new GuiWidget()
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit
};
progressContainer.AddChild(bottomRow);
var timeContainer = new FlowLayoutWidget()
{
HAnchor = HAnchor.Center | HAnchor.Fit,
Margin = 3
};
bottomRow.AddChild(timeContainer);
// we can only reslice on 64 bit, because in 64 bit we always have the gcode loaded
if (IntPtr.Size == 8)
{
var resliceButton = new TextButton("Re-Slice", theme)
{
HAnchor = HAnchor.Right,
VAnchor = VAnchor.Center,
Margin = new BorderDouble(0, 0, 7, 0),
Name = "Re-Slice Button"
};
bool activelySlicing = false;
resliceButton.Click += (s, e) =>
{
resliceButton.Enabled = false;
UiThread.RunOnIdle(async() =>
{
if (!activelySlicing &&
printer.Settings.IsValid() &&
printer.Bed.EditContext.SourceItem != null)
{
activelySlicing = true;
if (bottomRow.Name == null)
{
bottomRow.Name = printer.Bed.EditContext.GCodeFilePath;
}
await ApplicationController.Instance.Tasks.Execute("Saving".Localize(), printer.Bed.SaveChanges);
// start up a new slice on a backgroud thread
await ApplicationController.Instance.SliceItemLoadOutput(
printer,
printer.Bed.Scene,
printer.Bed.EditContext.GCodeFilePath);
// Switch to the 3D layer view if on Model view
if (printer.ViewState.ViewMode == PartViewMode.Model)
{
printer.ViewState.ViewMode = PartViewMode.Layers3D;
}
// when it is done queue it to the change to gcode stream
var message2 = "Would you like to switch to the new G-Code? Before you switch, check that your are seeing the changes you expect.".Localize();
var caption2 = "Switch to new G-Code?".Localize();
StyledMessageBox.ShowMessageBox(async(clickedOk2) =>
{
if (clickedOk2)
{
if (printer.Connection != null &&
(printer.Connection.PrinterIsPrinting || printer.Connection.PrinterIsPaused))
{
printer.Connection.SwitchToGCode(printer.Bed.EditContext.GCodeFilePath);
bottomRow.Name = printer.Bed.EditContext.GCodeFilePath;
}
}
else
{
await ApplicationController.Instance.SliceItemLoadOutput(
printer,
printer.Bed.Scene,
bottomRow.Name);
}
activelySlicing = false;
resliceButton.Enabled = true;
}, message2, caption2, StyledMessageBox.MessageType.YES_NO, "Switch".Localize(), "Cancel".Localize());
}
else
{
resliceButton.Enabled = true;
}
});
};
bottomRow.AddChild(resliceButton);
}
timeContainer.AddChild(new ImageWidget(AggContext.StaticData.LoadIcon("fa-clock_24.png", theme.InvertIcons))
{
VAnchor = VAnchor.Center
});
var timeWidget = new TextWidget("", pointSize: 22, textColor: theme.Colors.PrimaryTextColor)
{
AutoExpandBoundsToText = true,
Margin = new BorderDouble(10, 0, 0, 0),
VAnchor = VAnchor.Center,
};
timeContainer.AddChild(timeWidget);
var runningInterval = UiThread.SetInterval(
() =>
{
int secondsPrinted = printer.Connection.SecondsPrinted;
int hoursPrinted = (int)(secondsPrinted / (60 * 60));
int minutesPrinted = (secondsPrinted / 60 - hoursPrinted * 60);
secondsPrinted = secondsPrinted % 60;
// TODO: Consider if the consistency of a common time format would look and feel better than changing formats based on elapsed duration
timeWidget.Text = (hoursPrinted <= 0) ? $"{minutesPrinted}:{secondsPrinted:00}" : $"{hoursPrinted}:{minutesPrinted:00}:{secondsPrinted:00}";
progressDial.LayerIndex = printer.Connection.CurrentlyPrintingLayer;
progressDial.LayerCompletedRatio = printer.Connection.RatioIntoCurrentLayer;
progressDial.CompletedRatio = printer.Connection.PercentComplete / 100;
switch (printer.Connection.CommunicationState)
{
case CommunicationStates.PreparingToPrint:
case CommunicationStates.Printing:
case CommunicationStates.Paused:
bodyRow.Visible = true;
break;
default:
bodyRow.Visible = false;
break;
}
}, 1);
bodyRow.Closed += (s, e) => runningInterval.Continue = false;
bodyRow.Visible = false;
return(bodyRow);
}
public static double TotalCost(this GCodeFile loadedGCode, PrinterConfig printer)
{
double filamentCost = printer.Settings.GetValue <double>(SettingsKey.filament_cost);
return(loadedGCode.TotalMass(printer) / 1000 * filamentCost);
}
public FeedRateMultiplyerStream(PrinterConfig printer, GCodeStream internalStream)
: base(printer, internalStream)
{
}
public NotPrintingStream(PrinterConfig printer)
: base(printer)
{
}
public MapStartGCode(PrinterConfig printer, string canonicalSettingsName, string exportedName, bool escapeNewlineCharacters)
: base(printer, canonicalSettingsName, exportedName)
{
this.escapeNewlineCharacters = escapeNewlineCharacters;
}
public DropMenuWrappedField(UIField uiField, SliceSettingData settingData, Color textColor, ThemeConfig theme, PrinterConfig printer)
{
this.printer = printer;
this.settingData = settingData;
this.uiField = uiField;
this.textColor = textColor;
this.theme = theme;
}
private void Init()
{
printConfig = new PrinterConfig();
txtBoxBevaragePrinterName.Text = printConfig.BeveragePrinterName;
txtBoxKitchenPrinterName.Text = printConfig.KitchenPrinterName;
txtBoxClientPrinterName.Text = printConfig.ClientPrinterName;
txtBoxotherPrinterName.Text = printConfig.OtherPrinter;
txtBoxothernonfoodPrinterNametextBox.Text = printConfig.OtherNonFoodPrinter;
radioButtonYex.Checked = printConfig.EnableSerialPortPrinting;
//if (printConfig.BeveragePrintPaperSize == 38)
//{
// rdbBevaragePrintSize38.Checked = true;
//}
//else if (printConfig.BeveragePrintPaperSize == 26)
//{
// rdbBevaragePrintSize26.Checked = true;
//}
//if (printConfig.KitchenPrintPaperSize == 38)
//{
// rdbKitchenPaperSize38.Checked = true;
//}
//else if (printConfig.KitchenPrintPaperSize == 26)
//{
// rdbKitchenPaperSize26.Checked = true;
//}
}
public void Initialize(PrinterConfig printer)
{
this.printer = printer;
printerSetupRequired = PrinterCalibrationWizard.SetupRequired(printer, requiresLoadedFilament: false);
}
