private void btnOk_Click(object sender, EventArgs e)
{
if (this.measureCmdLine == null)
{
MessageBox.Show("当前轨迹未增加基准测高，请生成测高指令");
return;
}
if (this.SymbolLinesCache.Count < 1)
{
MessageBox.Show("未生成轨迹请生成轨迹");
return;
}
if (this.tbArcSpeed.Text == "")
{
MessageBox.Show("圆弧速度未设置");
return;
}
this.symbolLinesCmdLine.BindMHCmdLine = this.measureCmdLine;
this.symbolLinesCmdLine.Symbols = this.SymbolLinesCache;
this.symbolLinesCmdLine.LineStyle = (LineStyle)cbxLineType.SelectedIndex;
this.symbolLinesCmdLine.ArcSpeed = this.tbArcSpeed.Value;
this.symbolLinesCmdLine.OffsetX = (double)this.nudOffsetX.Value;
this.symbolLinesCmdLine.OffsetY = (double)this.nudOffsetY.Value;
if (isCreating)
{
MsgCenter.Broadcast(Constants.MSG_FINISH_ADDING_CMD_LINE, this, this.symbolLinesCmdLine);
}
else
{
MsgCenter.Broadcast(Constants.MSG_FINISH_EDITING_CMD_LINE, this, this.symbolLinesCmdLine);
}
this.Close();
}
private void btnOk_Click(object sender, EventArgs e)
{
string patternName = tbPatternName.Text.Trim();
if (!tbOriginX.IsValid || !tbOriginY.IsValid)
{
//MessageBox.Show("Please input valid origin values.");
MessageBox.Show("请输入正确的原点坐标.");
return;
}
if (pattern is Workpiece)
{
Workpiece w = pattern as Workpiece;
w.OriginPos.X = tbOriginX.Value;
w.OriginPos.Y = tbOriginY.Value;
FluidProgram.Current.GetWorkPieceCmdLine().Origin.X = tbOriginX.Value;
FluidProgram.Current.GetWorkPieceCmdLine().Origin.Y = tbOriginY.Value;
CompareObj.CompareField(w.OriginPos, workPieceOrgBackUp, null, this.GetType().Name, true);
}
else
{
//机械坐标->系统坐标
PointD p = this.workpiece.SystemRel(tbOriginX.Value, tbOriginY.Value);
pattern.Origin.X = p.X;
pattern.Origin.Y = p.Y;
CompareObj.CompareField(p, patternOrgBackUp, null, this.GetType().Name, true);
}
MsgCenter.Broadcast(Constants.MSG_FINISH_EDITING_PATTREN_ORIGIN, null, null);
DialogResult = DialogResult.OK;
Close();
}
private void btnOk_Click(object sender, EventArgs e)
{
int otherFormAccessCount = RoleMgr.Instance.Developer.OtherFormAccess.GetLength();
int mainFormAccessCount = RoleMgr.Instance.Developer.MainFormAccess.GetLength();
int programFormAccessCount = RoleMgr.Instance.Developer.ProgramFormAccess.GetLength();
int i = 0;
for (; i < mainFormAccessCount; i++)
{
RoleMgr.Instance.Operator.MainFormAccess[i] = (bool)dgvAccess.Rows[i].Cells[0].Value;
RoleMgr.Instance.Technician.MainFormAccess[i] = (bool)dgvAccess.Rows[i].Cells[1].Value;
RoleMgr.Instance.Supervisor.MainFormAccess[i] = (bool)dgvAccess.Rows[i].Cells[2].Value;
}
for (; i < mainFormAccessCount + programFormAccessCount; i++)
{
int j = i - mainFormAccessCount;
RoleMgr.Instance.Operator.ProgramFormAccess[j] = (bool)dgvAccess.Rows[i].Cells[0].Value;
RoleMgr.Instance.Technician.ProgramFormAccess[j] = (bool)dgvAccess.Rows[i].Cells[1].Value;
RoleMgr.Instance.Supervisor.ProgramFormAccess[j] = (bool)dgvAccess.Rows[i].Cells[2].Value;
}
for (; i < mainFormAccessCount + programFormAccessCount + otherFormAccessCount; i++)
{
int j = i - mainFormAccessCount - programFormAccessCount;
RoleMgr.Instance.Operator.OtherFormAccess[j] = (bool)dgvAccess.Rows[i].Cells[0].Value;
RoleMgr.Instance.Technician.OtherFormAccess[j] = (bool)dgvAccess.Rows[i].Cells[1].Value;
RoleMgr.Instance.Supervisor.OtherFormAccess[j] = (bool)dgvAccess.Rows[i].Cells[2].Value;
}
MsgCenter.Broadcast(MsgConstants.MODIFY_ACCESS, this, null);
this.Close();
}
private void btnOk_Click(object sender, System.EventArgs e)
{
if (comboBoxSysPositions.SelectedItem == null)
{
//MessageBox.Show("System position is not selected.");
MetroSetMessageBox.Show(this, "请选择坐标点位.");
return;
}
UserPosition up = comboBoxSysPositions.SelectedItem as UserPosition;
moveToLocationCmdLine.PositionName = up.Name;
moveToLocationCmdLine.MoveType = up.MoveType;
if (isCreating)
{
MsgCenter.Broadcast(Constants.MSG_FINISH_ADDING_CMD_LINE, this, moveToLocationCmdLine);
}
else
{
MsgCenter.Broadcast(Constants.MSG_FINISH_EDITING_CMD_LINE, this, moveToLocationCmdLine);
}
if (!this.isCreating)
{
if (this.moveToLocationCmdLine != null && this.moveToLocationCmdLineBackUp != null)
{
CompareObj.CompareField(this.moveToLocationCmdLine, this.moveToLocationCmdLineBackUp, null, this.GetType().Name, true);
}
}
}
private void btnOk_Click(object sender, System.EventArgs e)
{
if (!tbZ.IsValid)
{
//MessageBox.Show("Please input a double number for z.");
MetroSetMessageBox.Show(this, "请输入小数.");
return;
}
moveAbsZCmdLine.Z = tbZ.Value;
if (isCreating)
{
MsgCenter.Broadcast(Constants.MSG_FINISH_ADDING_CMD_LINE, this, moveAbsZCmdLine);
}
else
{
MsgCenter.Broadcast(Constants.MSG_FINISH_EDITING_CMD_LINE, this, moveAbsZCmdLine);
}
if (!this.isCreating)
{
if (this.moveAbsZCmdLine != null && this.moveAbsZCmdLineBackUp != null)
{
CompareObj.CompareField(this.moveAbsZCmdLine, this.moveAbsZCmdLineBackUp, null, this.GetType().Name, true);
}
}
}
private void btnOk_Click(object sender, System.EventArgs e)
{
if (!tbWaitInMills.IsValid)
{
//MessageBox.Show("Please input valid value.");
MessageBox.Show("请输入正确的值");
return;
}
timerCmdLine.WaitInMills = tbWaitInMills.Value;
if (isCreating)
{
MsgCenter.Broadcast(Constants.MSG_FINISH_ADDING_CMD_LINE, this, timerCmdLine);
}
else
{
MsgCenter.Broadcast(Constants.MSG_FINISH_EDITING_CMD_LINE, this, timerCmdLine);
}
Properties.Settings.Default.NormalTimer = timerCmdLine.WaitInMills;
if (!this.isCreating)
{
Close();
if (this.timerCmdLine != null && this.timerCmdLineBackUp != null)
{
CompareObj.CompareField(this.timerCmdLine, this.timerCmdLineBackUp, null, this.GetType().Name, true);
}
}
}
private void BtnSave_Click(object sender, EventArgs e)
{
Machine.Instance.SetupValve();
MsgCenter.Broadcast(MachineMsg.SETUP_INFO, this);
Machine.Instance.Setting.Save();
CompareObj.CompareProperty(Machine.Instance.Setting, this.SettingBackUp, null, this.GetType().Name);
}
private void btnOk_Click(object sender, EventArgs e)
{
if (changed)
{
MsgCenter.Broadcast(Constants.MSG_SYS_POSITIONS_DEFS_CHANGED, this, null);
}
}
private void BeginBroadcastIdle()
{
this.BeginInvoke(new Action(() =>
{
MsgCenter.Broadcast(MsgType.IDLE, this, null);
}));
}
private void btnOk_Click(object sender, EventArgs e)
{
if (!tbWaitInMills.IsValid || !tbSpeed.IsValid)
{
//MessageBox.Show("Please input valid value");
MetroSetMessageBox.Show(this, "请输入合理的值");
return;
}
changeSpeedCmdLine.Speed = tbSpeed.Value;
changeSpeedCmdLine.WaitInMills = tbWaitInMills.Value;
if (isCreating)
{
MsgCenter.Broadcast(Constants.MSG_FINISH_ADDING_CMD_LINE, this, changeSpeedCmdLine);
}
else
{
MsgCenter.Broadcast(Constants.MSG_FINISH_EDITING_CMD_LINE, this, changeSpeedCmdLine);
}
if (!this.isCreating)
{
if (this.changeSpeedCmdLine != null && this.changeSpeedCmdLineBackUp != null)
{
CompareObj.CompareProperty(this.changeSpeedCmdLine, this.changeSpeedCmdLineBackUp, null, this.GetType().Name, true);
}
}
}
private void CbxChn2_SelectedIndexChanged(object sender, EventArgs e)
{
SensorMgr.Instance.Proportioners.Channel2 = (int)cbxChn2.SelectedItem;
MsgCenter.Broadcast(MachineMsg.SETUP_INFO, this, null);
SensorMgr.Instance.Save();
CompareObj.CompareProperty(SensorMgr.Instance.Proportioners, this.settingBackUp, true);
}
private void btnOk_Click(object sender, EventArgs e)
{
if (!tbX.IsValid || !tbY.IsValid)
{
//MessageBox.Show("Please input valid values.");
MessageBox.Show("请输入正确的值.");
return;
}
PointD laserMap = this.pattern.SystemRel(tbX.Value, tbY.Value);
measureHeightCmdLine.Position.X = laserMap.X;
measureHeightCmdLine.Position.Y = laserMap.Y;
measureHeightCmdLine.StandardHt = this.heightControl1.BoardHeight;
measureHeightCmdLine.ToleranceMax = this.heightControl1.MaxTolerance;
measureHeightCmdLine.ToleranceMin = this.heightControl1.MinTolerance;
if (isCreating)
{
MsgCenter.Broadcast(Constants.MSG_FINISH_ADDING_CMD_LINE, this, measureHeightCmdLine);
}
else
{
MsgCenter.Broadcast(Constants.MSG_FINISH_EDITING_CMD_LINE, this, measureHeightCmdLine);
}
Properties.Settings.Default.laserX = measureHeightCmdLine.Position.X;
Properties.Settings.Default.laserY = measureHeightCmdLine.Position.Y;
if (!this.isCreating)
{
Close();
if (this.measureHeightCmdLine != null && this.measureHeightCmdLineBackUp != null)
{
CompareObj.CompareProperty(this.measureHeightCmdLine, this.measureHeightCmdLineBackUp, null, this.GetType().Name, true);
CompareObj.CompareField(this.measureHeightCmdLine, this.measureHeightCmdLineBackUp, null, this.GetType().Name, true);
}
}
}
private void btnOK_Click(object sender, EventArgs e)
{
foreach (DataGridViewRow item in this.dgvAccess.Rows)
{
if (item.Tag is ControlAccess)
{
ControlAccess access = item.Tag as ControlAccess;
RoleEnums roleLevel = RoleEnums.Operator;
if ((bool)item.Cells[1].Value)
{
roleLevel = RoleEnums.Operator;
}
else if ((bool)item.Cells[2].Value)
{
roleLevel = RoleEnums.Technician;
}
else if ((bool)item.Cells[3].Value)
{
roleLevel = RoleEnums.Supervisor;
}
access.RoleLevel = roleLevel;
}
}
MsgCenter.Broadcast(MsgConstants.MODIFY_ACCESS, this, null);
AccessControlMgr.Instance.Save();
}
private void btnOk_Click(object sender, System.EventArgs e)
{
if (!tbStart.IsValid || !tbEnd.IsValid)
{
//MessageBox.Show("Please input valid values.");
MetroSetMessageBox.Show(this, "请输入正确的值");
return;
}
if (tbStart.Value > tbEnd.Value)
{
//MessageBox.Show("Start value can not be bigger than end value.");
MetroSetMessageBox.Show(this, "起始点不可以大于结束点.");
return;
}
loopPassCmdLine.Start = tbStart.Value;
loopPassCmdLine.End = tbEnd.Value;
if (isCreating)
{
MsgCenter.Broadcast(Constants.MSG_FINISH_ADDING_CMD_LINE, this, loopPassCmdLine, new NextLoopCmdLine());
}
else
{
MsgCenter.Broadcast(Constants.MSG_FINISH_EDITING_CMD_LINE, this, loopPassCmdLine);
}
if (!this.isCreating)
{
if (this.loopPassCmdLine != null && this.loopPassCmdLineBackUp != null)
{
CompareObj.CompareField(this.loopPassCmdLine, this.loopPassCmdLineBackUp, null, this.GetType().Name, true);
}
}
}
private void btnReverse_Click(object sender, EventArgs e)
{
Pattern p = pattern.ReversePattern();
MsgCenter.Broadcast(Constants.MSG_ADD_PATTERN, this, p);
this.Close();
}
private async void Cms_ItemClicked(object sender, ToolStripItemClickedEventArgs e)
{
MsgCenter.Broadcast(MsgType.BUSY, this, null);
await Task.Factory.StartNew(() =>
{
if (e.ClickedItem.Text == strMoveHome)
{
Machine.Instance.MoveHome();
}
else if (e.ClickedItem.Text == strInitMotion)
{
AlarmServer.Instance.MachineInitDone = false;
Machine.Instance.InitMotion();
AlarmServer.Instance.MachineInitDone = true;
}
else if (e.ClickedItem.Text == strInitVision)
{
AlarmServer.Instance.MachineInitDone = false;
Machine.Instance.InitVision();
AlarmServer.Instance.MachineInitDone = true;
this.BeginInvoke(new MethodInvoker(() =>
{
MsgCenter.Broadcast(MachineMsg.INIT_VISION, this);
}));
}
else if (e.ClickedItem.Text == strInitSensors)
{
AlarmServer.Instance.MachineInitDone = false;
Machine.Instance.InitSensors();
AlarmServer.Instance.MachineInitDone = true;
}
});
MsgCenter.Broadcast(MsgType.IDLE, this, null);
}
private void BeginBroadcastPaused()
{
this.BeginInvoke(new Action(() =>
{
MsgCenter.Broadcast(MsgType.PAUSED, this, null);
}));
}
private void btnOk_Click(object sender, System.EventArgs e)
{
if (!tbX.IsValid || !tbY.IsValid)
{
//MessageBox.Show("Please input valid value.");
MessageBox.Show("请输入正确的值.");
return;
}
moveAbsXyCmdLine.MoveType = this.getMoveType();
moveAbsXyCmdLine.Position.X = tbX.Value;
moveAbsXyCmdLine.Position.Y = tbY.Value;
if (isCreating)
{
MsgCenter.Broadcast(Constants.MSG_FINISH_ADDING_CMD_LINE, this, moveAbsXyCmdLine);
}
else
{
MsgCenter.Broadcast(Constants.MSG_FINISH_EDITING_CMD_LINE, this, moveAbsXyCmdLine);
}
Properties.Settings.Default.absX = moveAbsXyCmdLine.Position.X;
Properties.Settings.Default.absY = moveAbsXyCmdLine.Position.Y;
if (!this.isCreating)
{
Close();
if (this.moveAbsXyCmdLine != null && this.moveAbsXyCmdLineBackUp != null)
{
CompareObj.CompareField(this.moveAbsXyCmdLine, this.moveAbsXyCmdLineBackUp, null, this.GetType().Name, true);
}
}
}
private void btnSave_Click(object sender, EventArgs e)
{
Machine.Instance.Setting.ValveSelect = (ValveSelection)this.cmbValveSelect.SelectedIndex;
if (!Machine.Instance.Valve1.ValveSeries.Equals(Machine.Instance.Valve2.ValveSeries) && Machine.Instance.Setting.ValveSelect == ValveSelection.双阀)
{
MetroSetMessageBox.Show(this, "请选择同类型阀组", "警告", MessageBoxButtons.OK, MessageBoxIcon.Warning);
return;
}
Machine.Instance.SetupValve();
Machine.Instance.Valve1.ValveSeries = (ValveSeries)this.metroSetListBox1.SelectedIndex;
Machine.Instance.Valve2.ValveSeries = (ValveSeries)this.metroSetListBox2.SelectedIndex;
ValvePrmMgr.Instance.FindBy(ValveType.Valve1).ValveSeires = (ValveSeries)this.metroSetListBox1.SelectedIndex;
ValvePrmMgr.Instance.FindBy(ValveType.Valve2).ValveSeires = (ValveSeries)this.metroSetListBox2.SelectedIndex;
Machine.Instance.Setting.Save();
Machine.Instance.SaveValveSettings();
if (Machine.Instance.Setting.ValveSelect == ValveSelection.双阀)
{
if (Machine.Instance.Valve1.ValveSeries == Machine.Instance.Valve2.ValveSeries)
{
if (Machine.Instance.Valve1.ValveSeries == ValveSeries.喷射阀)
{
Machine.Instance.DualValve = new JtDualValve(CardMgr.Instance.FindBy(0), Machine.Instance.Valve1, Machine.Instance.Valve2);
}
if (Machine.Instance.Valve1.ValveSeries == ValveSeries.螺杆阀)
{
Machine.Instance.DualValve = new SvDualValve(CardMgr.Instance.FindBy(0), Machine.Instance.Valve1, Machine.Instance.Valve2);
}
}
}
MsgCenter.Broadcast(MachineMsg.SETUP_VALVE, this, Machine.Instance.Valve1.ValveSeries, Machine.Instance.Valve2.ValveSeries);
}
private void SettingSensorsForm_OnSaveClicked()
{
MsgCenter.Broadcast(MachineMsg.SETUP_INFO, this, null);
SensorMgr.Instance.Save();
this.Close();
CompareObj.CompareProperty(this.currEasySerialPort, this.currEasySerialPortBackUp, null, this.GetType().Name, true);
}
/// <summary>
/// 切换用户操作
/// </summary>
/// <param name="user"></param>
public void SwitchUser(Account user)
{
this.CurrentAccount = user;
RoleMgr.Instance.SwitchRole(this.currentAccount.RoleType);
AccessControlMgr.Instance.CurrRole = (RoleEnums)(int)user.RoleType;
//通知主界面和编程界面,更新界面，处理非模态窗口。
MsgCenter.Broadcast(MsgConstants.SWITCH_USER, this, null);
}
private void cbxVendor_SelectedIndexChanged(object sender, EventArgs e)
{
Camera.Vendor vendor = (Camera.Vendor) this.cmbVendor.SelectedItem;
Machine.Instance.Camera.Close();
Machine.Instance.Camera.SelectVendor(vendor);
Machine.Instance.InitVision();
MsgCenter.Broadcast(MachineMsg.INIT_VISION, this);
}
private void CbxVendor_SelectedIndexChanged(object sender, EventArgs e)
{
HeaterControllerMgr.Vendor vendor = (HeaterControllerMgr.Vendor) this.cbxVendor.SelectedItem;
Machine.Instance.HeaterController1.SetHeater(vendor);
Machine.Instance.HeaterController2.SetHeater(vendor);
MsgCenter.Broadcast(MachineMsg.SETUP_INFO, this, null);
SensorMgr.Instance.Save();
}
private void CbxControlType2_SelectedIndexChanged(object sender, EventArgs e)
{
Proportioner.ControlType controlType = (Proportioner.ControlType)cbxControlType2.SelectedItem;
Machine.Instance.Proportioner2.SetProportionor(2, controlType, SensorMgr.Instance.Proportioners);
MsgCenter.Broadcast(MachineMsg.SETUP_INFO, this, null);
SensorMgr.Instance.Save();
CompareObj.CompareProperty(SensorMgr.Instance.Proportioners, this.settingBackUp, true);
}
private void btnSave_Click(object sender, EventArgs e)
{
MsgCenter.Broadcast(MachineMsg.SETUP_INFO, this);
CameraPrmMgr.Instance.Save();
if (Machine.Instance.Camera.Prm != null && this.prmBackUp != null)
{
CompareObj.CompareProperty(Machine.Instance.Camera.Prm, this.prmBackUp, null, this.GetType().Name);
}
}
private void btnOk_Click(object sender, EventArgs e)
{
if (rbModelFind.Checked)
{
badMarkCmdLine.FindType = BadMarkCmdLine.BadMarkType.ModelFind;
if (this.editModelFindForm != null)
{
if (this.editModelFindForm.DialogResult == DialogResult.OK)
{
badMarkCmdLine.Position.X = badMarkCmdLine.ModelFindPrm.PosInPattern.X;
badMarkCmdLine.Position.Y = badMarkCmdLine.ModelFindPrm.PosInPattern.Y;
}
}
else if (isCreating)
{
MessageBox.Show(messageTip[0]);
return;
}
}
else
{
badMarkCmdLine.FindType = BadMarkCmdLine.BadMarkType.GrayScale;
if (this.editGrayCheckForm != null)
{
if (this.editGrayCheckForm.DialogResult == DialogResult.OK)
{
badMarkCmdLine.Position.X = badMarkCmdLine.GrayCheckPrm.PosInPattern.X;
badMarkCmdLine.Position.Y = badMarkCmdLine.GrayCheckPrm.PosInPattern.Y;
}
}
else if (isCreating)
{
MessageBox.Show(messageTip[1]);
return;
}
}
if (rbNgSkip.Checked)
{
badMarkCmdLine.IsOkSkip = false;
}
else
{
badMarkCmdLine.IsOkSkip = true;
}
if (isCreating)
{
MsgCenter.Broadcast(Constants.MSG_FINISH_ADDING_CMD_LINE, this, badMarkCmdLine);
}
else
{
MsgCenter.Broadcast(Constants.MSG_FINISH_EDITING_CMD_LINE, this, badMarkCmdLine);
}
Close();
CompareObj.CompareMember(this.badMarkCmdLine, this.badMarkCmdLineBackUp, null, this.GetType().Name, true);
}
private void btnOk_Click(object sender, EventArgs e)
{
Machine.Instance.Setting.MachineSelect = (MachineSelection)this.comboBox1.SelectedItem;
Machine.Instance.SetupIO();
MsgCenter.Broadcast(MachineMsg.SETUP_INFO, this, null);
Machine.Instance.Setting.Save();
this.Close();
CompareObj.CompareProperty(Machine.Instance.Setting, this.SettingBackUp, null, this.GetType().Name);
}
private void btnOk_Click(object sender, System.EventArgs e)
{
if (lineCoordinateCache.Count <= 0)
{
//MessageBox.Show("Line points is empty.");
MessageBox.Show("线轨迹点个数不可以为0.");
return;
}
lineCmdLine.LineCoordinateList.Clear();
lineCmdLine.LineCoordinateList.AddRange(lineCoordinateCache);
lineCmdLine.IsWeightControl = cbWeightControl.Checked;
if (isCreating)
{
MsgCenter.Broadcast(Constants.MSG_FINISH_ADDING_CMD_LINE, this, lineCmdLine);
}
else
{
MsgCenter.Broadcast(Constants.MSG_FINISH_EDITING_CMD_LINE, this, lineCmdLine);
}
int count = lineCmdLine.LineCoordinateList.Count;
if (count > 0)
{
LineCoordinate lineCoordinate = lineCmdLine.LineCoordinateList[count - 1];
Properties.Settings.Default.LineStartX = lineCoordinate.Start.X;
Properties.Settings.Default.LineStartY = lineCoordinate.Start.Y;
Properties.Settings.Default.LineEndX = lineCoordinate.End.X;
Properties.Settings.Default.LineEndY = lineCoordinate.End.Y;
Properties.Settings.Default.LineStyle = (int)lineCmdLine.LineStyle;
Properties.Settings.Default.LineIsWt = lineCmdLine.IsWeightControl;
Properties.Settings.Default.LineWt = lineCmdLine.WholeWeight;
}
if (Machine.Instance.Valve1.RunMode == ValveRunMode.AdjustLine)
{
Line.WaitMsg.Set();
}
if (!this.isCreating)
{
Close();
if (this.lineCmdLine != null && this.lineCmdLineBackUp != null)
{
CompareObj.CompareField(this.lineCmdLine, this.lineCmdLineBackUp, null, this.GetType().Name, true);
CompareObj.CompareProperty(this.lineCmdLine, this.lineCmdLineBackUp, null, this.GetType().Name, true);
if (this.lineCmdLine.LineCoordinateList.Count == this.lineCmdLineBackUp.LineCoordinateList.Count)
{
for (int i = 0; i < this.lineCmdLine.LineCoordinateList.Count; i++)
{
string pathRoot = this.GetType().Name + "\\lineCmdLine\\" + "LineCoordinateList: " + i.ToString();
CompareObj.CompareField(this.lineCmdLine.LineCoordinateList[i], this.lineCmdLineBackUp.LineCoordinateList[i], null, pathRoot, true);
}
}
}
}
}
private void CbxVendor_SelectedIndexChanged(object sender, EventArgs e)
{
Laser.Vendor vendor = (Laser.Vendor) this.cbxVendor.SelectedItem;
Machine.Instance.Laser.SetLaserable(vendor);
this.txtReadCmd.Text = Machine.Instance.Laser.Laserable.CmdReadValue;
MsgCenter.Broadcast(MachineMsg.SETUP_INFO, this, null);
SensorMgr.Instance.Save();
CompareObj.CompareProperty(SensorMgr.Instance.Laser, this.settingBackUp, null, this.GetType().Name, true);
}
private void btnCancel_Click(object sender, System.EventArgs e)
{
if (Machine.Instance.Valve1.RunMode == ValveRunMode.AdjustLine)
{
//偏移量调整
Line.WaitMsg.Set();
//TODO
}
MsgCenter.Broadcast(MsgDef.MSG_PARAMPAGE_CLEAR, null);
}
