public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath) { //创建项目模型存放地址 string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName; if (!Directory.Exists(itemPath)) { Directory.CreateDirectory(itemPath); } else { DialogResult result = MessageBox.Show("模型文件夹" + itemPath + "存在,如果之前pack已经执行过,将不执行pack过程而是直接修改模型,如果要继续请点击YES,否请点击No中断作图", "提示信息", MessageBoxButtons.YesNo); if (result == DialogResult.No) { return; } } //Pack的后缀 string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6); //判断文件是否存在,如果存在将不执行pack,如果不存在则执行pack //packango后需要接收打包完成的地址,参数为后缀 string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm"; if (!File.Exists(packedAssyPath)) { packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath); } //查询参数 KCJSB535 item = (KCJSB535)objKCJSB535Service.GetModelByModuleTreeId(tree.ModuleTreeId.ToString()); swApp.CommandInProgress = true; //告诉SolidWorks,现在是用外部程序调用命令 int warnings = 0; int errors = 0; suffix = "_" + suffix;//后缀 ModelDoc2 swModel = default(ModelDoc2); ModelDoc2 swPart = default(ModelDoc2); AssemblyDoc swAssy = default(AssemblyDoc); Component2 swComp; Feature swFeat = default(Feature); object configNames = null; ModelDocExtension swModelDocExt = default(ModelDocExtension); bool status = false; string compReName = string.Empty; //打开Pack后的模型 swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY, (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2; swAssy = swModel as AssemblyDoc; //装配体 string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称 swModelDocExt = (ModelDocExtension)swModel.Extension; //打开装配体后必须重建,使Pack后的零件名都更新到带后缀的状态,否则程序出错 swModel.ForceRebuild3(true); //TopOnly参数设置成true,只重建顶层,不重建零件内部 /*注意SolidWorks单位是m,计算是应当/1000m * 整形与整形运算得出的结果仍然时整形,1640 / 1000m结果为0,因此必须将其中一个转化成decimal型,使用后缀m就可以了 * (int)不进行四舍五入,Convert.ToInt32会四舍五入 */ //-----------计算中间值,---------- int fcNo = (int)((item.Length - item.FCSideLeft - item.FCSideRight) / 499m) - item.FCBlindNo; try { //----------Top Level---------- //判断FC数量,FC侧板长度 if (item.FCBlindNo > 0) { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0107[BP-500]{500}-1")); swComp.SetSuppression2(2); //2解压缩,0压缩 swFeat = swAssy.FeatureByName("LocalLPattern4"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swModel.Parameter("D1@LocalLPattern4").SystemValue = item.FCBlindNo; //D1阵列数量,D3阵列距离 swModel.Parameter("D1@Distance35").SystemValue = item.FCSideLeft / 1000m; } else { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0107[BP-500]{500}-1")); swComp.SetSuppression2(0); //2解压缩,0压缩 swFeat = swAssy.FeatureByName("LocalLPattern4"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //判断FC/KSA if (item.FCType == "KSA") { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5202040401-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. swFeat = swAssy.FeatureByName("LocalLPattern5"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swModel.Parameter("D1@LocalLPattern5").SystemValue = fcNo; //D1阵列数量,D3阵列距离 swModel.Parameter("D1@Distance37").SystemValue = (item.FCSideLeft + 500m * item.FCBlindNo) / 1000m; swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "KCJ FC FILTER-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. swFeat = swAssy.FeatureByName("LocalLPattern3"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } else { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "KCJ FC FILTER-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. swFeat = swAssy.FeatureByName("LocalLPattern3"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swModel.Parameter("D1@LocalLPattern3").SystemValue = fcNo; //D1阵列数量,D3阵列距离 swModel.Parameter("D1@Distance36").SystemValue = (item.FCSideLeft + 500m * item.FCBlindNo) / 1000m; swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5202040401-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. swFeat = swAssy.FeatureByName("LocalLPattern5"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //----------油网侧板---------- switch (item.FCSide) { case "LEFT": //重命名装配体内部 if (item.FCType == "KSA") { compReName = "FNCE0108[BP-" + tree.Module + "]{" + (int)(item.FCSideLeft + fcNo * 2.5m) + "}"; } else { compReName = "FNCE0108[BP-" + tree.Module + "]{" + (int)(item.FCSideLeft - 4m) + "}"; } status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swModelDocExt.RenameDocument(compReName); } swModel.ClearSelection2(true); status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swModel.ClearSelection2(true); if (status) { swComp = swAssy.GetComponentByName(compReName + "-1"); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 if (item.FCType == "KSA") { swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft + fcNo * 2.5m) / 1000m; } else { swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft - 4m) / 1000m; } } swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. break; case "RIGHT": swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. //重命名装配体内部 if (item.FCType == "KSA") { compReName = "FNCE0109[BP-" + tree.Module + "]{" + (int)(item.FCSideRight + fcNo * 2.5m) + "}"; } else { compReName = "FNCE0109[BP-" + tree.Module + "]{" + (int)(item.FCSideRight - 4m) + "}"; } status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swModelDocExt.RenameDocument(compReName); } swModel.ClearSelection2(true); status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swModel.ClearSelection2(true); if (status) { swComp = swAssy.GetComponentByName(compReName + "-1"); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 if (item.FCType == "KSA") { swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight + fcNo * 2.5m) / 1000m; } else { swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight - 4m) / 1000m; } } break; case "BOTH": //重命名装配体内部 if (item.FCType == "KSA") { compReName = "FNCE0108[BP-" + tree.Module + ".1]{" + (int)(item.FCSideLeft + fcNo * 1.25m) + "}"; } else { compReName = "FNCE0108[BP-" + tree.Module + "]{" + (int)(item.FCSideLeft - 2m) + "}"; } status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swModelDocExt.RenameDocument(compReName); } swModel.ClearSelection2(true); status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swModel.ClearSelection2(true); if (status) { swComp = swAssy.GetComponentByName(compReName + "-1"); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 if (item.FCType == "KSA") { swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft + fcNo * 1.25m) / 1000m; } else { swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft - 2m) / 1000m; } } //重命名装配体内部 if (item.FCType == "KSA") { compReName = "FNCE0109[BP-" + tree.Module + ".2]{" + (int)(item.FCSideRight + fcNo * 1.25m) + "}"; } else { compReName = "FNCE0109[BP-" + tree.Module + "]{" + (int)(item.FCSideRight - 2m) + "}"; } status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swModelDocExt.RenameDocument(compReName); } swModel.ClearSelection2(true); status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swModel.ClearSelection2(true); if (status) { swComp = swAssy.GetComponentByName(compReName + "-1"); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 if (item.FCType == "KSA") { swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight + fcNo * 1.25m) / 1000m; } else { swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight - 2m) / 1000m; } } break; default: swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. break; } //----------日本项目需要压缩零件---------- if (item.Japan == "YES") { //吊装垫片 swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-9")); swComp.SetSuppression2(0); //2解压缩,0压缩. swFeat = swAssy.FeatureByName("LocalLPattern1"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 //排风脖颈 swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXSPIGOT-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. //排风滑门 swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXDOOR-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. //排风腔 //重命名装配体内部 compReName = "FNCE0111[KCJSB535-" + tree.Module + "]{" + (int)item.Length + "}"; status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0111-2") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swModelDocExt.RenameDocument(compReName); } swModel.ClearSelection2(true); status = swModelDocExt.SelectByID2(compReName + "-2" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swModel.ClearSelection2(true); if (status) { swComp = swAssy.GetComponentByName(compReName + "-2"); swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D1@Linear austragen1").SystemValue = item.Length / 1000m; swFeat = swComp.FeatureByName("EX"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("Cut-Extrude4"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("LIGHT HOLE LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("ANSULSIDE RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("ANSULSIDE LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("ANDTECSIDE LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 if (item.MARVEL == "YES") { swFeat = swComp.FeatureByName("MA-NTC"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("MA-TAB"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else { swFeat = swComp.FeatureByName("MA-NTC"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("MA-TAB"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } } } else { //吊装垫片 swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-9")); swComp.SetSuppression2(2); //2解压缩,0压缩. swFeat = swAssy.FeatureByName("LocalLPattern1"); swFeat.SetSuppression2(2, 2, configNames); //参数1:1解压,0压缩 //排风脖颈 swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXSPIGOT-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0019-1")); swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D2@基体-法兰1").SystemValue = (item.ExLength + 50m) / 1000m; swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m; swFeat = swComp.FeatureByName("ANSUL"); if (item.ANSUL == "YES") { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0020-1")); swPart = swComp.GetModelDoc2();//打开零件 swPart.Parameter("D2@基体-法兰1").SystemValue = (item.ExLength + 50m) / 1000m; swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m; swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0047-1")); swPart = swComp.GetModelDoc2();//打开零件 swPart.Parameter("D2@基体-法兰1").SystemValue = item.ExWidth / 1000m; swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m; swFeat = swComp.FeatureByName("ANDTEC"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0048-2")); swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D2@基体-法兰1").SystemValue = item.ExWidth / 1000m; swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m; swFeat = swComp.FeatureByName("ANDTEC"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 //排风滑门 swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXDOOR-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D1@Distance3").SystemValue = (item.ExWidth + 20m) / 1000m; swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0018-1")); swPart = swComp.GetModelDoc2();//打开零件 swPart.Parameter("D2@Base-Flange1").SystemValue = (item.ExLength * 2m + 100m) / 1000m; swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0013-1")); swPart = swComp.GetModelDoc2();//打开零件 swPart.Parameter("D1@Sketch1").SystemValue = (item.ExLength / 2m + 10m) / 1000m; swPart.Parameter("D2@Sketch1").SystemValue = (item.ExWidth + 40m) / 1000m; //排风腔 //重命名装配体内部 compReName = "FNCE0111[KCJSB535-" + tree.Module + "]{" + (int)item.Length + "}"; status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0111-2") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swModelDocExt.RenameDocument(compReName); } swModel.ClearSelection2(true); status = swModelDocExt.SelectByID2(compReName + "-2" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swModel.ClearSelection2(true); if (status) { swComp = swAssy.GetComponentByName(compReName + "-2"); swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D1@Linear austragen1").SystemValue = item.Length / 1000m; swFeat = swComp.FeatureByName("EX"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("Cut-Extrude4"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D3@Sketch1").SystemValue = item.ExRightDis / 1000m; swPart.Parameter("D1@Sketch1").SystemValue = item.ExLength / 1000m; swPart.Parameter("D2@Sketch1").SystemValue = item.ExWidth / 1000m; if (item.ANSUL == "YES") { //侧喷 if (item.ANSide == "LEFT") { swFeat = swComp.FeatureByName("ANSULSIDE RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("ANSULSIDE LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else if (item.ANSide == "RIGHT") { swFeat = swComp.FeatureByName("ANSULSIDE RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("ANSULSIDE LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } else { swFeat = swComp.FeatureByName("ANSULSIDE RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("ANSULSIDE LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //探测器 if (item.ANDetector == "LEFT") { swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("ANDTECSIDE LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else if (item.ANDetector == "RIGHT") { swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("ANDTECSIDE LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } else if (item.ANDetector == "BOTH") { swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("ANDTECSIDE LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else { swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("ANDTECSIDE LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } } else { swFeat = swComp.FeatureByName("ANSULSIDE RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("ANSULSIDE LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("ANDTECSIDE LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } if (item.MARVEL == "YES") { swFeat = swComp.FeatureByName("MA-NTC"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("MA-TAB"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else { swFeat = swComp.FeatureByName("MA-NTC"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("MA-TAB"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } } if (item.LightCable == "LEFT") { swFeat = swComp.FeatureByName("LIGHT HOLE LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } else if (item.LightCable == "RIGHT") { swFeat = swComp.FeatureByName("LIGHT HOLE LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else { swFeat = swComp.FeatureByName("LIGHT HOLE LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } } //----------灯腔---------- swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0112-1")); swPart = swComp.GetModelDoc2();//打开零件 swPart.Parameter("D1@Linear austragen1").SystemValue = item.Length / 1000m; swFeat = swComp.FeatureByName("FC SUPPORT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("JAP LED M8"); if (item.Japan == "YES") { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } swFeat = swComp.FeatureByName("LIGHT T8"); if (item.LightType == "T8") { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } if (item.LightCable == "LEFT") { swFeat = swComp.FeatureByName("LIGHT HOLE LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } else if (item.LightCable == "RIGHT") { swFeat = swComp.FeatureByName("LIGHT HOLE LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else { swFeat = swComp.FeatureByName("LIGHT HOLE LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0056-1")); swPart = swComp.GetModelDoc2();//打开零件 swPart.Parameter("D1@Skizze1").SystemValue = item.Length / 1000m; //----------SSP灯板支撑条---------- if (item.SSPType == "DOME") { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0036-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0035-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D2@Sketch1").SystemValue = item.Length / 1000m; if (item.Gutter == "YES") { swModel.Parameter("D1@Distance34").SystemValue = item.GutterWidth / 1000m; } else { swModel.Parameter("D1@Distance34").SystemValue = 0.5m / 1000m; } } else { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0036-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D2@Sketch1").SystemValue = item.Length / 1000m; if (item.Gutter == "YES") { swModel.Parameter("D1@Distance32").SystemValue = item.GutterWidth / 1000m; } else { swModel.Parameter("D1@Distance32").SystemValue = 0.5m / 1000m; } swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0035-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. } swModel.ForceRebuild3(true); //设置成true,直接更新顶层,速度很快,设置成false,每个零件都会更新,很慢 swModel.Save(); //保存,很耗时间 swApp.CloseDoc(packedAssyPath); //关闭,很快 } catch (Exception ex) { throw new Exception(packedAssyPath + "作图过程发生异常,详细:" + ex.Message); } finally { swApp.CommandInProgress = false; //及时关闭外部命令调用,否则影响SolidWorks的使用 } }
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath) { //创建项目模型存放地址 string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName; if (!Directory.Exists(itemPath)) { Directory.CreateDirectory(itemPath); } else { DialogResult result = MessageBox.Show("模型文件夹" + itemPath + "存在,如果之前pack已经执行过,将不执行pack过程而是直接修改模型,如果要继续请点击YES,否请点击No中断作图", "提示信息", MessageBoxButtons.YesNo); if (result == DialogResult.No) { return; } } //Pack的后缀 string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6); //判断文件是否存在,如果存在将不执行pack,如果不存在则执行pack //packango后需要接收打包完成的地址,参数为后缀 string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm"; if (!File.Exists(packedAssyPath)) { packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath); } //查询参数 LFUSA item = (LFUSA)objLFUSAService.GetModelByModuleTreeId(tree.ModuleTreeId.ToString()); swApp.CommandInProgress = true; //告诉SolidWorks,现在是用外部程序调用命令 int warnings = 0; int errors = 0; suffix = "_" + suffix;//后缀 ModelDoc2 swModel = default(ModelDoc2); ModelDoc2 swPart = default(ModelDoc2); AssemblyDoc swAssy = default(AssemblyDoc); Component2 swComp; Feature swFeat = default(Feature); object configNames = null; ModelDocExtension swModelDocExt = default(ModelDocExtension); bool status = false; string compReName = string.Empty; //打开Pack后的模型 swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY, (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2; swAssy = swModel as AssemblyDoc; //装配体 string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称 swModelDocExt = (ModelDocExtension)swModel.Extension; //打开装配体后必须重建,使Pack后的零件名都更新到带后缀的状态,否则程序出错 swModel.ForceRebuild3(true); //TopOnly参数设置成true,只重建顶层,不重建零件内部 /*注意SolidWorks单位是m,计算是应当/1000m * 整形与整形运算得出的结果仍然时整形,1640 / 1000m结果为0,因此必须将其中一个转化成decimal型,使用后缀m就可以了 * (int)不进行四舍五入,Convert.ToInt32会四舍五入 */ //-----------计算中间值,---------- try { //----------Top Level---------- //----------散流器主体---------- //重命名装配体内部 compReName = "FNCA0001[LFUSA-" + tree.Module + "]{" + (int)item.Length + "}(" + (int)item.Width + ")"; status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCA0001-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swModelDocExt.RenameDocument(compReName); } swModel.ClearSelection2(true); status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swModel.ClearSelection2(true); if (status) { swComp = swAssy.GetComponentByName(compReName + "-1"); swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D2@Base-Flange1").SystemValue = item.Length / 1000m; swPart.Parameter("D1@Sketch1").SystemValue = (item.Width - 2m) / 1000m; swPart.Parameter("D2@Sketch2").SystemValue = item.SuDia / 1000m; swPart.Parameter("D1@Sketch2").SystemValue = (item.SuDis * (item.SuNo / 2m - 1m) + item.SuDis / 2m) / 1000m; if (item.SuNo < 2) { swFeat = swComp.FeatureByName("LPattern1"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } else { swFeat = swComp.FeatureByName("LPattern1"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D1@LPattern1").SystemValue = item.SuNo; swPart.Parameter("D3@LPattern1").SystemValue = item.SuDis / 1000m; } swFeat = swComp.FeatureByName("HANGERHOLE"); if (item.Japan == "YES") { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } else { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } swFeat = swComp.FeatureByName("CUTLEFT"); if (item.SidePanel == "LEFT" || item.SidePanel == "BOTH") { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } swFeat = swComp.FeatureByName("CUTRIGHT"); if (item.SidePanel == "RIGHT" || item.SidePanel == "BOTH") { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } } //----------侧板---------- switch (item.SidePanel) { case "LEFT": swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-2")); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D1@Sketch1").SystemValue = (item.Width - 2m) / 1000m; swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-4")); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D9@Skizze1").SystemValue = (item.Width - 2m) / 1000m; swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-3")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-3")); swComp.SetSuppression2(0); //2解压缩,0压缩. break; case "RIGHT": swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-2")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-4")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-3")); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D1@Sketch1").SystemValue = (item.Width - 2m) / 1000m; swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-3")); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D9@Skizze1").SystemValue = (item.Width - 2m) / 1000m; break; case "MIDDLE": swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-2")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-4")); swComp.SetSuppression2(2); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-3")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-3")); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D9@Skizze1").SystemValue = (item.Width - 2m) / 1000m; break; default: swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-2")); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D1@Sketch1").SystemValue = (item.Width - 2m) / 1000m; swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-4")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-3")); swComp.SetSuppression2(2); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-3")); swComp.SetSuppression2(0); //2解压缩,0压缩. break; } if (item.Japan == "YES") { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-9")); swComp.SetSuppression2(0); //2解压缩,0压缩. swFeat = swAssy.FeatureByName("LocalLPattern1"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } else { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-9")); swComp.SetSuppression2(2); //2解压缩,0压缩. swFeat = swAssy.FeatureByName("LocalLPattern1"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } swModel.ForceRebuild3(true); //设置成true,直接更新顶层,速度很快,设置成false,每个零件都会更新,很慢 swModel.Save(); //保存,很耗时间 swApp.CloseDoc(packedAssyPath); //关闭,很快 } catch (Exception ex) { throw new Exception(packedAssyPath + "作图过程发生异常,详细:" + ex.Message); } finally { swApp.CommandInProgress = false; //及时关闭外部命令调用,否则影响SolidWorks的使用 } }
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath) { //创建项目模型存放地址 string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName; if (!Directory.Exists(itemPath)) { Directory.CreateDirectory(itemPath); } else { DialogResult result = MessageBox.Show("模型文件夹" + itemPath + "存在,如果之前pack已经执行过,将不执行pack过程而是直接修改模型,如果要继续请点击YES,否请点击No中断作图", "提示信息", MessageBoxButtons.YesNo); if (result == DialogResult.No) { return; } } //Pack的后缀 string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6); //判断文件是否存在,如果存在将不执行pack,如果不存在则执行pack //packango后需要接收打包完成的地址,参数为后缀 string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm"; if (!File.Exists(packedAssyPath)) { packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath); } //查询参数 CJ300 item = (CJ300)objCJ300Service.GetModelByModuleTreeId(tree.ModuleTreeId.ToString()); swApp.CommandInProgress = true; //告诉SolidWorks,现在是用外部程序调用命令 int warnings = 0; int errors = 0; suffix = "_" + suffix;//后缀 ModelDoc2 swModel = default(ModelDoc2); ModelDoc2 swPart = default(ModelDoc2); AssemblyDoc swAssy = default(AssemblyDoc); Component2 swComp; Feature swFeat = default(Feature); object configNames = null; ModelDocExtension swModelDocExt = default(ModelDocExtension); bool status = false; string compReName = string.Empty; //打开Pack后的模型 swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY, (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2; swAssy = swModel as AssemblyDoc; //装配体 string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称 swModelDocExt = (ModelDocExtension)swModel.Extension; //打开装配体后必须重建,使Pack后的零件名都更新到带后缀的状态,否则程序出错 swModel.ForceRebuild3(true); //TopOnly参数设置成true,只重建顶层,不重建零件内部 /*注意SolidWorks单位是m,计算是应当/1000m * 整形与整形运算得出的结果仍然时整形,1640 / 1000m结果为0,因此必须将其中一个转化成decimal型,使用后缀m就可以了 * (int)不进行四舍五入,Convert.ToInt32会四舍五入 */ //-----------计算中间值,---------- int cjNo = (int)((item.Length - 40m) / 30m);//天花烟罩马蹄形CJ孔阵列距离为30 decimal firstCjDis = (item.Length - 30m * cjNo) / 2; if (firstCjDis < 15m) { cjNo--; firstCjDis = firstCjDis + 15m; } decimal leftSBDis = item.LeftDis; decimal rightSBDis = item.RightDis; try { //----------Top Level---------- //----------脖颈---------- if (item.SuType == "UP") { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0010-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201990413-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. } else { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0010-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201990413-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. } //----------侧板---------- switch (item.SidePanel) { case "LEFT": swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0017-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0019-2")); swComp.SetSuppression2(2); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0018-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0019-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. break; case "RIGHT": swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0017-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0019-2")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0018-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0019-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. break; case "MIDDLE": swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0017-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0019-2")); swComp.SetSuppression2(2); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0018-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0019-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. break; default: swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0017-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0019-2")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0018-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0019-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. break; } //----------CJ腔主体---------- //重命名装配体内部 compReName = "FNCJ0020[CJ300-" + tree.Module + "]{" + (int)item.Length + "}"; status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCJ0020-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swModelDocExt.RenameDocument(compReName); } swModel.ClearSelection2(true); status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swModel.ClearSelection2(true); if (status) { swComp = swAssy.GetComponentByName(compReName + "-1"); swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D2@Skizze1").SystemValue = item.Length / 1000m; swPart.Parameter("D1@LPattern7").SystemValue = cjNo + 1; swPart.Parameter("D3@Skizze18").SystemValue = firstCjDis / 1000m; //BCJ if (item.BackCJSide == "LEFT" || item.BackCJSide == "BOTH") { swFeat = swComp.FeatureByName("BCJ-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D11@Sketch19").SystemValue = (item.LeftDis + 1m) / 1000m; leftSBDis = leftSBDis + 90m; } else { swFeat = swComp.FeatureByName("BCJ-LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } if (item.BackCJSide == "RIGHT" || item.BackCJSide == "BOTH") { swFeat = swComp.FeatureByName("BCJ-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D11@Sketch20").SystemValue = (item.RightDis + 1m) / 1000m; rightSBDis = rightSBDis + 90m; } else { swFeat = swComp.FeatureByName("BCJ-RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //----------左---------- //左类型排风腔KCJDB800 if (item.LeftBeamType == "KCJDB800" || item.LeftBeamType == "UCJDB800") { swFeat = swComp.FeatureByName("BCJ-LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("KCJDB800-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D59@Sketch46").SystemValue = (item.LeftBeamDis + 1m) / 1000m; if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH") { swFeat = swComp.FeatureByName("GUTTER-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m; swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m; swPart.Parameter("D6@Sketch48").SystemValue = (item.Length - item.LeftBeamDis + 1m) / 1000m; } } else { swFeat = swComp.FeatureByName("KCJDB800-LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //左类型排风腔KCWDB800 if (item.LeftBeamType == "KCWDB800" || item.LeftBeamType == "UCWDB800") { swFeat = swComp.FeatureByName("BCJ-LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("KCWDB800-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D31@Sketch32").SystemValue = (item.LeftBeamDis + 1m) / 1000m; if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH") { swFeat = swComp.FeatureByName("GUTTER-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m; swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m; swPart.Parameter("D6@Sketch48").SystemValue = (item.Length - item.LeftBeamDis + 1m) / 1000m; } } else { swFeat = swComp.FeatureByName("KCWDB800-LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //左类型排风腔KCJSB535 if (item.LeftBeamType == "KCJSB535" || item.LeftBeamType == "UCJSB535") { swFeat = swComp.FeatureByName("KCJSB535-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D46@Sketch35").SystemValue = (leftSBDis + 1m) / 1000m; if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH") { swFeat = swComp.FeatureByName("GUTTER-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m; swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m; swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 535m + 1m) / 1000m; } } else { swFeat = swComp.FeatureByName("KCJSB535-LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //左类型排风腔KCWSB535 if (item.LeftBeamType == "KCWSB535" || item.LeftBeamType == "UCWSB535") { swFeat = swComp.FeatureByName("KCWSB535-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D23@Sketch28").SystemValue = (leftSBDis + 1m) / 1000m; if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH") { swFeat = swComp.FeatureByName("GUTTER-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m; swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m; swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 535m + 1m) / 1000m; } } else { swFeat = swComp.FeatureByName("KCWSB535-LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //左类型排风腔UCJSB385 if (item.LeftBeamType == "UCJSB385") { swFeat = swComp.FeatureByName("UCJSB385-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D16@Sketch43").SystemValue = (leftSBDis + 1m) / 1000m; if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH") { swFeat = swComp.FeatureByName("GUTTER-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m; swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m; swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 385m + 1m) / 1000m; } } else { swFeat = swComp.FeatureByName("UCJSB385-LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //左类型排风腔KCJSB290 if (item.LeftBeamType == "KCJSB290") { swFeat = swComp.FeatureByName("KCJSB290-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D14@Sketch41").SystemValue = (leftSBDis + 1m) / 1000m; if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH") { swFeat = swComp.FeatureByName("GUTTER-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m; swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m; swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 290m + 1m) / 1000m; } } else { swFeat = swComp.FeatureByName("KCJSB290-LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //左类型排风腔KCJSB265 if (item.LeftBeamType == "KCJSB265") { swFeat = swComp.FeatureByName("KCJSB265-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D23@Sketch28").SystemValue = (leftSBDis + 1m) / 1000m; if (item.LKSide == "LEFT" || item.LKSide == "BOTH") { swFeat = swComp.FeatureByName("LKS270-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D24@Sketch51").SystemValue = (leftSBDis + 265m + 1m) / 1000m; if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH") { swFeat = swComp.FeatureByName("GUTTER-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m; swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m; swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 270m + 265m + 1m) / 1000m; } } else { if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH") { swFeat = swComp.FeatureByName("GUTTER-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m; swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m; swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 265m + 1m) / 1000m; } } } else { swFeat = swComp.FeatureByName("KCJSB265-LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //左类型排风腔KCWSB265 if (item.LeftBeamType == "KCWSB265") { swFeat = swComp.FeatureByName("KCWSB265-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D15@Sketch22").SystemValue = (leftSBDis + 1m) / 1000m; if (item.LKSide == "LEFT" || item.LKSide == "BOTH") { swFeat = swComp.FeatureByName("LKS270-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D24@Sketch51").SystemValue = (leftSBDis + 265m + 1m) / 1000m; if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH") { swFeat = swComp.FeatureByName("GUTTER-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m; swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m; swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 270m + 265m + 1m) / 1000m; } } else { if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH") { swFeat = swComp.FeatureByName("GUTTER-LEFT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m; swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m; swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 265m + 1m) / 1000m; } } } else { swFeat = swComp.FeatureByName("KCWSB265-LEFT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //----------右---------- //右类型排风腔KCJDB800 if (item.RightBeamType == "KCJDB800" || item.RightBeamType == "UCJDB800") { swFeat = swComp.FeatureByName("BCJ-RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("KCJDB800-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D59@Sketch47").SystemValue = (item.RightBeamDis + 1m) / 1000m; if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH") { swFeat = swComp.FeatureByName("GUTTER-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m; swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m; swPart.Parameter("D7@Sketch50").SystemValue = (item.Length - item.RightBeamDis + 1m) / 1000m; } } else { swFeat = swComp.FeatureByName("KCJDB800-RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //右类型排风腔KCWDB800 if (item.RightBeamType == "KCWDB800" || item.RightBeamType == "UCWDB800") { swFeat = swComp.FeatureByName("BCJ-RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("KCWDB800-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D31@Sketch45").SystemValue = (item.RightBeamDis + 1m) / 1000m; if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH") { swFeat = swComp.FeatureByName("GUTTER-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m; swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m; swPart.Parameter("D7@Sketch50").SystemValue = (item.Length - item.RightBeamDis + 1m) / 1000m; } } else { swFeat = swComp.FeatureByName("KCWDB800-RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //右类型排风腔KCJSB535 if (item.RightBeamType == "KCJSB535" || item.RightBeamType == "UCJSB535") { swFeat = swComp.FeatureByName("KCJSB535-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D46@Sketch37").SystemValue = (rightSBDis + 1m) / 1000m; if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH") { swFeat = swComp.FeatureByName("GUTTER-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m; swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m; swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 535m + 1m) / 1000m; } } else { swFeat = swComp.FeatureByName("KCJSB535-RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //右类型排风腔KCWSB535 if (item.RightBeamType == "KCWSB535" || item.RightBeamType == "UCWSB535") { swFeat = swComp.FeatureByName("KCWSB535-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D23@Sketch29").SystemValue = (rightSBDis + 1m) / 1000m; if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH") { swFeat = swComp.FeatureByName("GUTTER-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m; swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m; swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 535m + 1m) / 1000m; } } else { swFeat = swComp.FeatureByName("KCWSB535-RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //右类型排风腔UCJSB385 if (item.RightBeamType == "UCJSB385") { swFeat = swComp.FeatureByName("UCJSB385-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D16@Sketch44").SystemValue = (rightSBDis + 1m) / 1000m; if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH") { swFeat = swComp.FeatureByName("GUTTER-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m; swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m; swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 385m + 1m) / 1000m; } } else { swFeat = swComp.FeatureByName("UCJSB385-RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //右类型排风腔KCJSB290 if (item.RightBeamType == "KCJSB290") { swFeat = swComp.FeatureByName("KCJSB290-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D14@Sketch42").SystemValue = (rightSBDis + 1m) / 1000m; if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH") { swFeat = swComp.FeatureByName("GUTTER-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m; swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m; swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 290m + 1m) / 1000m; } } else { swFeat = swComp.FeatureByName("KCJSB290-RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //右类型排风腔KCJSB265 if (item.RightBeamType == "KCJSB265") { swFeat = swComp.FeatureByName("KCJSB265-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D1@Sketch55").SystemValue = (rightSBDis + 1m) / 1000m; if (item.LKSide == "RIGHT" || item.LKSide == "BOTH") { swFeat = swComp.FeatureByName("LKS270-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D24@Sketch53").SystemValue = (rightSBDis + 265m + 1m) / 1000m; if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH") { swFeat = swComp.FeatureByName("GUTTER-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m; swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m; swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 270m + 265m + 1m) / 1000m; } } else { if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH") { swFeat = swComp.FeatureByName("GUTTER-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m; swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m; swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 265m + 1m) / 1000m; } } } else { swFeat = swComp.FeatureByName("KCJSB265-RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //右类型排风腔KCWSB265 if (item.RightBeamType == "KCWSB265") { swFeat = swComp.FeatureByName("KCWSB265-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D14@Sketch23").SystemValue = (rightSBDis + 1m) / 1000m; if (item.LKSide == "RIGHT" || item.LKSide == "BOTH") { swFeat = swComp.FeatureByName("LKS270-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D24@Sketch53").SystemValue = (rightSBDis + 265m + 1m) / 1000m; if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH") { swFeat = swComp.FeatureByName("GUTTER-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m; swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m; swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 270m + 265m + 1m) / 1000m; } } else { if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH") { swFeat = swComp.FeatureByName("GUTTER-RIGHT"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m; swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m; swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 265m + 1m) / 1000m; } } } else { swFeat = swComp.FeatureByName("KCWSB265-RIGHT"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } } //----------其他零件---------- swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0016-1")); swPart = swComp.GetModelDoc2();//打开零件 swPart.Parameter("D2@Sketch1").SystemValue = (item.Length - 10m) / 1000m; swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0021-1")); swPart = swComp.GetModelDoc2();//打开零件 swPart.Parameter("D1@Skizze1").SystemValue = item.Length / 1000m; swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0022-1")); swPart = swComp.GetModelDoc2();//打开零件 swPart.Parameter("D4@Skizze1").SystemValue = item.Length / 1000m; swPart.Parameter("D4@Skizze3").SystemValue = item.SuDis / 1000m; swModel.ForceRebuild3(true); //设置成true,直接更新顶层,速度很快,设置成false,每个零件都会更新,很慢 swModel.Save(); //保存,很耗时间 swApp.CloseDoc(packedAssyPath); //关闭,很快 } catch (Exception ex) { throw new Exception(packedAssyPath + "作图过程发生异常,详细:" + ex.Message); } finally { swApp.CommandInProgress = false; //及时关闭外部命令调用,否则影响SolidWorks的使用 } }
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath) { //创建项目模型存放地址 string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName; if (!Directory.Exists(itemPath)) { Directory.CreateDirectory(itemPath); } else { DialogResult result = MessageBox.Show("模型文件夹" + itemPath + "存在,如果之前pack已经执行过,将不执行pack过程而是直接修改模型,如果要继续请点击YES,否请点击No中断作图", "提示信息", MessageBoxButtons.YesNo); if (result == DialogResult.No) { return; } } //Pack的后缀 string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6); //判断文件是否存在,如果存在将不执行pack,如果不存在则执行pack //packango后需要接收打包完成的地址,参数为后缀 string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm"; if (!File.Exists(packedAssyPath)) { packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath); } //查询参数 SSPTSD item = (SSPTSD)objSSPTSDService.GetModelByModuleTreeId(tree.ModuleTreeId.ToString()); swApp.CommandInProgress = true; //告诉SolidWorks,现在是用外部程序调用命令 int warnings = 0; int errors = 0; suffix = "_" + suffix;//后缀 ModelDoc2 swModel = default(ModelDoc2); ModelDoc2 swPart = default(ModelDoc2); AssemblyDoc swAssy = default(AssemblyDoc); Component2 swComp; Feature swFeat = default(Feature); object configNames = null; ModelDocExtension swModelDocExt = default(ModelDocExtension); bool status = false; string compReName = string.Empty; //打开Pack后的模型 swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY, (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2; swAssy = swModel as AssemblyDoc; //装配体 string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称 swModelDocExt = (ModelDocExtension)swModel.Extension; //打开装配体后必须重建,使Pack后的零件名都更新到带后缀的状态,否则程序出错 swModel.ForceRebuild3(true); //TopOnly参数设置成true,只重建顶层,不重建零件内部 /*注意SolidWorks单位是m,计算是应当/1000m * 整形与整形运算得出的结果仍然时整形,1640 / 1000m结果为0,因此必须将其中一个转化成decimal型,使用后缀m就可以了 * (int)不进行四舍五入,Convert.ToInt32会四舍五入 */ //-----------计算中间值,---------- int supportNo = item.MPanelNo * 2 - 1;//计算支撑板数量 if (item.LeftType == "Z" && item.RightType == "Z") { supportNo = supportNo * 2 + 8; } else if (item.LeftType == "W" && item.RightType == "W") { supportNo = supportNo * 2 + 4; } else if ((item.LeftType == "Z" && item.RightType == "W") || (item.LeftType == "W" && item.RightType == "Z")) { supportNo = supportNo * 2 + 6; } try { //----------Top Level---------- swModel.Parameter("D1@LocalLPattern3").SystemValue = supportNo; //----------边缘Z板---------- swModel.Parameter("D1@Distance16").SystemValue = (item.MPanelNo * 2m - 1m) * 500m / 1000m; //左边 if (item.LeftType == "Z") { //重命名装配体内部 compReName = "FNCM0013[SSPDZ-" + tree.Module + ".L]{" + (int)(item.Length - 10m) + "}(" + (int)item.LeftLength + ")"; status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCM0013-L[SSPDZ-]{}()-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swModelDocExt.RenameDocument(compReName); } swModel.ClearSelection2(true); status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swModel.ClearSelection2(true); if (status) { swComp = swAssy.GetComponentByName(compReName + "-1"); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D2@Skizze1").SystemValue = (item.Length - 540m) / 1000m; swPart.Parameter("D1@Skizze1").SystemValue = item.LeftLength / 1000m; swFeat = swComp.FeatureByName("LED"); if (item.LightType == "LED60") { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } } //重命名装配体内部 compReName = "FNCM0011[SSPDW-" + tree.Module + ".L]{" + (int)(item.Length - 10m) + "}(500)"; status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCM0011-L[SSPDW-]{}()-4") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swModelDocExt.RenameDocument(compReName); } swModel.ClearSelection2(true); status = swModelDocExt.SelectByID2(compReName + "-4" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swModel.ClearSelection2(true); if (status) { swComp = swAssy.GetComponentByName(compReName + "-4"); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D2@Skizze1").SystemValue = (item.Length - 540m) / 1000m; swPart.Parameter("D1@Skizze1").SystemValue = 499.5m / 1000m; swFeat = swComp.FeatureByName("LED"); if (item.LightType == "LED60") { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } } } else { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCM0013-L[SSPDZ-]{}()-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. //重命名装配体内部 compReName = "FNCM0011[SSPDW-" + tree.Module + ".L]{" + (int)(item.Length - 10m) + "}(" + (int)item.LeftLength + ")"; status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCM0011-L[SSPDW-]{}()-4") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swModelDocExt.RenameDocument(compReName); } swModel.ClearSelection2(true); status = swModelDocExt.SelectByID2(compReName + "-4" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swModel.ClearSelection2(true); if (status) { swComp = swAssy.GetComponentByName(compReName + "-4"); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D2@Skizze1").SystemValue = (item.Length - 540m) / 1000m; swPart.Parameter("D1@Skizze1").SystemValue = item.LeftLength / 1000m; swFeat = swComp.FeatureByName("LED"); if (item.LightType == "LED60") { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } } } //右边 if (item.RightType == "Z") { //重命名装配体内部 compReName = "FNCM0013[SSPDZ-" + tree.Module + ".R]{" + (int)(item.Length - 10m) + "}(" + (int)item.RightLength + ")"; status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCM0013-R[SSPDZ-]{}()-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swModelDocExt.RenameDocument(compReName); } swModel.ClearSelection2(true); status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swModel.ClearSelection2(true); if (status) { swComp = swAssy.GetComponentByName(compReName + "-1"); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D2@Skizze1").SystemValue = (item.Length - 540m) / 1000m; swPart.Parameter("D1@Skizze1").SystemValue = item.RightLength / 1000m; swFeat = swComp.FeatureByName("LED"); if (item.LightType == "LED60") { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } } //重命名装配体内部 compReName = "FNCM0011[SSPDW-" + tree.Module + ".R]{" + (int)(item.Length - 10m) + "}(500)"; status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCM0011-R[SSPDW-]{}()-5") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swModelDocExt.RenameDocument(compReName); } swModel.ClearSelection2(true); status = swModelDocExt.SelectByID2(compReName + "-5" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swModel.ClearSelection2(true); if (status) { swComp = swAssy.GetComponentByName(compReName + "-5"); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D2@Skizze1").SystemValue = (item.Length - 540m) / 1000m; swPart.Parameter("D1@Skizze1").SystemValue = 499.5m / 1000m; swFeat = swComp.FeatureByName("LED"); if (item.LightType == "LED60") { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } } } else { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCM0013-R[SSPDZ-]{}()-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. //重命名装配体内部 compReName = "FNCM0011[SSPDW-" + tree.Module + ".R]{" + (int)(item.Length - 10m) + "}(" + (int)item.RightLength + ")"; status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCM0011-R[SSPDW-]{}()-5") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swModelDocExt.RenameDocument(compReName); } swModel.ClearSelection2(true); status = swModelDocExt.SelectByID2(compReName + "-5" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swModel.ClearSelection2(true); if (status) { swComp = swAssy.GetComponentByName(compReName + "-5"); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D2@Skizze1").SystemValue = (item.Length - 540m) / 1000m; swPart.Parameter("D1@Skizze1").SystemValue = item.RightLength / 1000m; swFeat = swComp.FeatureByName("LED"); if (item.LightType == "LED60") { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } } } //----------标准M板---------- //重命名装配体内部 compReName = "FNCM0012[SSPDM-" + tree.Module + "]{" + (int)(item.Length - 10m) + "}(500)"; status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCM0012[SSPDM-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swModelDocExt.RenameDocument(compReName); } swModel.ClearSelection2(true); status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swModel.ClearSelection2(true); if (status) { swComp = swAssy.GetComponentByName(compReName + "-1"); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D2@Skizze1").SystemValue = (item.Length - 540m) / 1000m; swPart.Parameter("D1@Skizze1").SystemValue = 499.5m / 1000m; swFeat = swComp.FeatureByName("LED"); if (item.LightType == "LED60") { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } } //----------标准W板---------- if (item.MPanelNo == 1) { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCM0011[SSPDW-]{}-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. swFeat = swAssy.FeatureByName("LocalLPattern2"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swAssy.FeatureByName("LocalLPattern1"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } else { //重命名装配体内部 compReName = "FNCM0011[SSPDW-" + tree.Module + "]{" + (int)(item.Length - 10m) + "}(500)"; status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCM0011[SSPDW-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swModelDocExt.RenameDocument(compReName); } swModel.ClearSelection2(true); status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swModel.ClearSelection2(true); if (status) { swComp = swAssy.GetComponentByName(compReName + "-1"); swComp.SetSuppression2(2); //2解压缩,0压缩. swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D2@Skizze1").SystemValue = (item.Length - 540m) / 1000m; swPart.Parameter("D1@Skizze1").SystemValue = 499.5m / 1000m; swFeat = swComp.FeatureByName("LED"); if (item.LightType == "LED60") { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } } swFeat = swAssy.FeatureByName("LocalLPattern2"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swFeat = swAssy.FeatureByName("LocalLPattern1"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swModel.Parameter("D1@LocalLPattern2").SystemValue = item.MPanelNo; swModel.Parameter("D1@LocalLPattern1").SystemValue = item.MPanelNo - 1; } swModel.ForceRebuild3(true); //设置成true,直接更新顶层,速度很快,设置成false,每个零件都会更新,很慢 swModel.Save(); //保存,很耗时间 swApp.CloseDoc(packedAssyPath); //关闭,很快 } catch (Exception ex) { throw new Exception(packedAssyPath + "作图过程发生异常,详细:" + ex.Message); } finally { swApp.CommandInProgress = false; //及时关闭外部命令调用,否则影响SolidWorks的使用 } }
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath) { //创建项目模型存放地址 string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName; if (!Directory.Exists(itemPath)) { Directory.CreateDirectory(itemPath); } else { DialogResult result = MessageBox.Show("模型文件夹" + itemPath + "存在,如果之前pack已经执行过,将不执行pack过程而是直接修改模型,如果要继续请点击YES,否请点击No中断作图", "提示信息", MessageBoxButtons.YesNo); if (result == DialogResult.No) { return; } } //Pack的后缀 string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6); //判断文件是否存在,如果存在将不执行pack,如果不存在则执行pack //packango后需要接收打包完成的地址,参数为后缀 string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm"; if (!File.Exists(packedAssyPath)) { packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath); } //查询参数 LLKS item = (LLKS)objLLKSService.GetModelByModuleTreeId(tree.ModuleTreeId.ToString()); swApp.CommandInProgress = true; //告诉SolidWorks,现在是用外部程序调用命令 int warnings = 0; int errors = 0; suffix = "_" + suffix;//后缀 ModelDoc2 swModel = default(ModelDoc2); ModelDoc2 swPart = default(ModelDoc2); AssemblyDoc swAssy = default(AssemblyDoc); Component2 swComp; Feature swFeat = default(Feature); object configNames = null; ModelDocExtension swModelDocExt = default(ModelDocExtension); bool status = false; string compReName = string.Empty; //打开Pack后的模型 swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY, (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2; swAssy = swModel as AssemblyDoc; //装配体 string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称 swModelDocExt = (ModelDocExtension)swModel.Extension; //打开装配体后必须重建,使Pack后的零件名都更新到带后缀的状态,否则程序出错 swModel.ForceRebuild3(true); //TopOnly参数设置成true,只重建顶层,不重建零件内部 /*注意SolidWorks单位是m,计算是应当/1000m * 整形与整形运算得出的结果仍然时整形,1640 / 1000m结果为0,因此必须将其中一个转化成decimal型,使用后缀m就可以了 * (int)不进行四舍五入,Convert.ToInt32会四舍五入 */ //-----------计算中间值,---------- decimal sideLength = (item.Length - 17m - item.LongGlassNo * 1175m - item.ShortGlassNo * 575m) / 2;//长玻璃1158+17,558+17 int longGlassNo = item.LongGlassNo; while (sideLength < 29m) { sideLength = sideLength + 1175m / 2m;//如果侧板太短,则减一块玻璃 longGlassNo--; } try { //----------Top Level---------- swModel.Parameter("D1@Distance3").SystemValue = item.Length / 1000m; //----------边缘板---------- //重命名装配体内部 compReName = "FNCL0025[LLKS-" + tree.Module + "]{" + (int)sideLength + "}"; status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCL0025[LLKS-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swModelDocExt.RenameDocument(compReName); } swModel.ClearSelection2(true); status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swModel.ClearSelection2(true); if (status) { swComp = swAssy.GetComponentByName(compReName + "-1"); swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D2@Skizze1").SystemValue = sideLength / 1000m; } //----------长玻璃---------- if (longGlassNo > 0) { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600010-7")); swComp.SetSuppression2(2); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-2")); swComp.SetSuppression2(2); //2解压缩,0压缩. } else { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600010-7")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-2")); swComp.SetSuppression2(0); //2解压缩,0压缩. } swFeat = swAssy.FeatureByName("LocalLPattern1"); if (longGlassNo > 1) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swModel.Parameter("D1@LocalLPattern1").SystemValue = longGlassNo; } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //----------短玻璃---------- if (item.ShortGlassNo > 0) { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600011-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-6")); swComp.SetSuppression2(2); //2解压缩,0压缩. } else { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600011-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-6")); swComp.SetSuppression2(0); //2解压缩,0压缩. } swFeat = swAssy.FeatureByName("LocalLPattern2"); if (item.ShortGlassNo > 1) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swModel.Parameter("D1@LocalLPattern2").SystemValue = item.ShortGlassNo; } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } swModel.ForceRebuild3(true); //设置成true,直接更新顶层,速度很快,设置成false,每个零件都会更新,很慢 swModel.Save(); //保存,很耗时间 swApp.CloseDoc(packedAssyPath); //关闭,很快 } catch (Exception ex) { throw new Exception(packedAssyPath + "作图过程发生异常,详细:" + ex.Message); } finally { swApp.CommandInProgress = false; //及时关闭外部命令调用,否则影响SolidWorks的使用 } }
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath) { //创建项目模型存放地址 string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName; if (!Directory.Exists(itemPath)) { Directory.CreateDirectory(itemPath); } else { DialogResult result = MessageBox.Show("模型文件夹" + itemPath + "存在,如果之前pack已经执行过,将不执行pack过程而是直接修改模型,如果要继续请点击YES,否请点击No中断作图", "提示信息", MessageBoxButtons.YesNo); if (result == DialogResult.No) { return; } } //Pack的后缀 string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6); //判断文件是否存在,如果存在将不执行pack,如果不存在则执行pack //packango后需要接收打包完成的地址,参数为后缀 string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm"; if (!File.Exists(packedAssyPath)) { packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath); } //查询参数 BF200 item = (BF200)objBF200Service.GetModelByModuleTreeId(tree.ModuleTreeId.ToString()); swApp.CommandInProgress = true; //告诉SolidWorks,现在是用外部程序调用命令 int warnings = 0; int errors = 0; suffix = "_" + suffix;//后缀 ModelDoc2 swModel = default(ModelDoc2); ModelDoc2 swSubModel = default(ModelDoc2); ModelDoc2 swPart = default(ModelDoc2); AssemblyDoc swAssy = default(AssemblyDoc); AssemblyDoc swSubAssy = default(AssemblyDoc); Component2 swComp; Feature swFeat = default(Feature); object configNames = null; ModelDocExtension swModelDocExt = default(ModelDocExtension); ModelDocExtension swSubModelDocExt = default(ModelDocExtension); bool status = false; string compReName = string.Empty; string subAssyName = string.Empty; //打开Pack后的模型 swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY, (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2; swAssy = swModel as AssemblyDoc; //装配体 string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称 swModelDocExt = (ModelDocExtension)swModel.Extension; //打开装配体后必须重建,使Pack后的零件名都更新到带后缀的状态,否则程序出错 swModel.ForceRebuild3(true); //TopOnly参数设置成true,只重建顶层,不重建零件内部 /*注意SolidWorks单位是m,计算是应当/1000m * 整形与整形运算得出的结果仍然时整形,1640 / 1000m结果为0,因此必须将其中一个转化成decimal型,使用后缀m就可以了 * (int)不进行四舍五入,Convert.ToInt32会四舍五入 */ //-----------计算中间值,---------- try { //----------Top Level---------- swModel.Parameter("D1@Distance36").SystemValue = (item.Length - 3m) / 1000m; //----------M型水洗挡板---------- if (item.MPanelNo == 0) { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "BFM-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "BFW-8")); swComp.SetSuppression2(0); //2解压缩,0压缩. . swFeat = swAssy.FeatureByName("LocalLPattern1"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } else { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "BFM-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. swSubAssy = swComp.GetModelDoc2(); //打开子装配 swSubModel = (ModelDoc2)swSubAssy; subAssyName = swSubModel.GetTitle().Substring(0, swSubModel.GetTitle().Length - 7); //获取装配体名称 swSubModelDocExt = (ModelDocExtension)swSubModel.Extension; //重命名装配体内部 compReName = "FNCE0120[BFM-" + tree.Module + "]{" + (int)item.MPanelLength + "}"; status = swSubModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0120[BFM-]{}-1") + "@" + subAssyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swSubModelDocExt.RenameDocument(compReName); } swSubModel.ClearSelection2(true); status = swSubModelDocExt.SelectByID2(compReName + "-1" + "@" + subAssyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swSubModel.ClearSelection2(true); if (status) { swComp = swSubAssy.GetComponentByName(compReName + "-1"); swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D1@Sketch1").SystemValue = item.MPanelLength / 1000m; } swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "BFW-8")); swComp.SetSuppression2(2); //2解压缩,0压缩. swSubAssy = swComp.GetModelDoc2(); //打开子装配 if (item.UVType == "YES") { swComp = swSubAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0124-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. swComp = swSubAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2900100016-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. } else { swComp = swSubAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0124-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swSubAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2900100016-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. } swFeat = swAssy.FeatureByName("LocalLPattern1"); swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swModel.Parameter("D1@LocalLPattern1").SystemValue = item.MPanelNo; swModel.Parameter("D3@LocalLPattern1").SystemValue = (item.MPanelLength + item.WPanelLength) / 1000m; } //----------W型水洗挡板---------- swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "BFWF-8")); swComp.SetSuppression2(2); //2解压缩,0压缩. swSubAssy = swComp.GetModelDoc2(); //打开子装配 swSubModel = (ModelDoc2)swSubAssy; subAssyName = swSubModel.GetTitle().Substring(0, swSubModel.GetTitle().Length - 7); //获取装配体名称 swSubModelDocExt = (ModelDocExtension)swSubModel.Extension; if (item.UVType == "YES") { swComp = swSubAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0124-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. swComp = swSubAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2900100016-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. } else { swComp = swSubAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0124-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swSubAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2900100016-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. } //重命名装配体内部 compReName = "FNCE0121[BFW-" + tree.Module + "]{" + (int)item.WPanelLength + "}"; status = swSubModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0121[BFW-]{}-1") + "@" + subAssyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swSubModelDocExt.RenameDocument(compReName); } swSubModel.ClearSelection2(true); status = swSubModelDocExt.SelectByID2(compReName + "-1" + "@" + subAssyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swSubModel.ClearSelection2(true); if (status) { swComp = swSubAssy.GetComponentByName(compReName + "-1"); swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D1@Sketch1").SystemValue = item.WPanelLength / 1000m; swFeat = swComp.FeatureByName("Cut-Extrude8"); if (item.UVType == "YES") { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } } //----------UL水洗挡板---------- swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "BFUL-1")); swSubAssy = swComp.GetModelDoc2(); //打开子装配 swSubModel = (ModelDoc2)swSubAssy; subAssyName = swSubModel.GetTitle().Substring(0, swSubModel.GetTitle().Length - 7); //获取装配体名称 swSubModelDocExt = (ModelDocExtension)swSubModel.Extension; //重命名装配体内部 compReName = "FNCE0119[BFUL-" + tree.Module + "]{" + (int)(item.LeftLength - 7) + "}"; status = swSubModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0119[BFUL-]{}-1") + "@" + subAssyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swSubModelDocExt.RenameDocument(compReName); } swSubModel.ClearSelection2(true); status = swSubModelDocExt.SelectByID2(compReName + "-1" + "@" + subAssyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swSubModel.ClearSelection2(true); if (status) { swComp = swSubAssy.GetComponentByName(compReName + "-1"); swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D1@Sketch1").SystemValue = (item.LeftLength - 7m) / 1000m; } //----------UR水洗挡板---------- swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "BFUR-1")); swSubAssy = swComp.GetModelDoc2(); //打开子装配 swSubModel = (ModelDoc2)swSubAssy; subAssyName = swSubModel.GetTitle().Substring(0, swSubModel.GetTitle().Length - 7); //获取装配体名称 swSubModelDocExt = (ModelDocExtension)swSubModel.Extension; //重命名装配体内部 compReName = "FNCE0118[BFUR-" + tree.Module + "]{" + (int)(item.RightLength - 7) + "}"; status = swSubModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0118[BFUR-]{}-1") + "@" + subAssyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swSubModelDocExt.RenameDocument(compReName); } swSubModel.ClearSelection2(true); status = swSubModelDocExt.SelectByID2(compReName + "-1" + "@" + subAssyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swSubModel.ClearSelection2(true); if (status) { swComp = swSubAssy.GetComponentByName(compReName + "-1"); swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D1@Sketch1").SystemValue = (item.RightLength - 7m) / 1000m; } swModel.ForceRebuild3(true); //设置成true,直接更新顶层,速度很快,设置成false,每个零件都会更新,很慢 swModel.Save(); //保存,很耗时间 swApp.CloseDoc(packedAssyPath); //关闭,很快 } catch (Exception ex) { throw new Exception(packedAssyPath + "作图过程发生异常,详细:" + ex.Message); } finally { swApp.CommandInProgress = false; //及时关闭外部命令调用,否则影响SolidWorks的使用 } }
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath) { //创建项目模型存放地址 string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName; if (!Directory.Exists(itemPath)) { Directory.CreateDirectory(itemPath); } else { DialogResult result = MessageBox.Show("模型文件夹" + itemPath + "存在,如果之前pack已经执行过,将不执行pack过程而是直接修改模型,如果要继续请点击YES,否请点击No中断作图", "提示信息", MessageBoxButtons.YesNo); if (result == DialogResult.No) { return; } } //Pack的后缀 string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6); //判断文件是否存在,如果存在将不执行pack,如果不存在则执行pack //packango后需要接收打包完成的地址,参数为后缀 string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm"; if (!File.Exists(packedAssyPath)) { packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath); } //查询参数 AN item = (AN)objANService.GetModelByModuleTreeId(tree.ModuleTreeId.ToString()); swApp.CommandInProgress = true; //告诉SolidWorks,现在是用外部程序调用命令 int warnings = 0; int errors = 0; suffix = "_" + suffix;//后缀 ModelDoc2 swModel = default(ModelDoc2); ModelDoc2 swPart = default(ModelDoc2); AssemblyDoc swAssy = default(AssemblyDoc); Component2 swComp; Feature swFeat = default(Feature); object configNames = null; ModelDocExtension swModelDocExt = default(ModelDocExtension); bool status = false; string compReName = string.Empty; //打开Pack后的模型 swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY, (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2; swAssy = swModel as AssemblyDoc; //装配体 string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称 swModelDocExt = (ModelDocExtension)swModel.Extension; //打开装配体后必须重建,使Pack后的零件名都更新到带后缀的状态,否则程序出错 swModel.ForceRebuild3(true); //TopOnly参数设置成true,只重建顶层,不重建零件内部 /*注意SolidWorks单位是m,计算是应当/1000m * 整形与整形运算得出的结果仍然时整形,1640 / 1000m结果为0,因此必须将其中一个转化成decimal型,使用后缀m就可以了 * (int)不进行四舍五入,Convert.ToInt32会四舍五入 */ //-----------计算中间值,---------- try { //----------Top Level---------- //----------IR保护支架---------- if (item.MARVEL == "NO") { swFeat = swAssy.FeatureByName("LocalLPattern1"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swAssy.FeatureByName("LocalLPattern2"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCB0001-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. } else { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCB0001-1")); if (item.IRNo > 0) { swComp.SetSuppression2(2); //2解压缩,0压缩. } else { swComp.SetSuppression2(0); //2解压缩,0压缩. } swFeat = swAssy.FeatureByName("LocalLPattern1"); if (item.IRNo > 1) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swModel.Parameter("D3@LocalLPattern1").SystemValue = item.IRDis2 / 1000m; } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } swFeat = swAssy.FeatureByName("LocalLPattern2"); if (item.IRNo > 2) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swModel.Parameter("D3@LocalLPattern2").SystemValue = (item.IRDis2 + item.IRDis3) / 1000m; } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } } //----------ANSUL探测器盒子---------- if (item.ANSUL == "NO") { swFeat = swAssy.FeatureByName("LocalLPattern3"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swAssy.FeatureByName("LocalLPattern4"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swAssy.FeatureByName("LocalLPattern5"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swAssy.FeatureByName("LocalLPattern6"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201990405-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. } else { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201990405-1")); if (item.ANDetectorNo > 0) { swComp.SetSuppression2(2); //2解压缩,0压缩. } else { swComp.SetSuppression2(0); //2解压缩,0压缩. } swFeat = swAssy.FeatureByName("LocalLPattern3"); if (item.ANDetectorNo > 1) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swModel.Parameter("D3@LocalLPattern3").SystemValue = item.ANDetectorDis2 / 1000m; } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } swFeat = swAssy.FeatureByName("LocalLPattern4"); if (item.ANDetectorNo > 2) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swModel.Parameter("D3@LocalLPattern4").SystemValue = (item.ANDetectorDis2 + item.ANDetectorDis3) / 1000m; } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } swFeat = swAssy.FeatureByName("LocalLPattern5"); if (item.ANDetectorNo > 2) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swModel.Parameter("D3@LocalLPattern5").SystemValue = (item.ANDetectorDis2 + item.ANDetectorDis3 + item.ANDetectorDis4) / 1000m; } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } swFeat = swAssy.FeatureByName("LocalLPattern6"); if (item.ANDetectorNo > 2) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swModel.Parameter("D3@LocalLPattern6").SystemValue = (item.ANDetectorDis2 + item.ANDetectorDis3 + item.ANDetectorDis4 + item.ANDetectorDis5) / 1000m; } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } } //----------ANSUL腔体---------- //重命名装配体内部 compReName = "FNCE0025[AN-" + tree.Module + "]{" + (int)item.Length + "}(" + (int)item.Width + ")"; status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0025-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swModelDocExt.RenameDocument(compReName); } swModel.ClearSelection2(true); status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swModel.ClearSelection2(true); if (status) { swComp = swAssy.GetComponentByName(compReName + "-1"); swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D2@Base-Flange1").SystemValue = item.Length / 1000m; swPart.Parameter("D1@Sketch1").SystemValue = item.Width / 1000m; if (item.ANSUL == "NO") { swFeat = swComp.FeatureByName("AN1"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("AN2"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("AN3"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("AN4"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("AN5"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("ANDTEC1"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("ANDTEC2"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("ANDTEC3"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("ANDTEC4"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("ANDTEC5"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } else { swFeat = swComp.FeatureByName("AN1"); if (item.ANDropNo > 0) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D1@Sketch7").SystemValue = item.ANYDis / 1000m; swPart.Parameter("D2@Sketch7").SystemValue = item.ANDropDis1 / 1000m; } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } swFeat = swComp.FeatureByName("AN2"); if (item.ANDropNo > 1) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D2@Sketch9").SystemValue = item.ANDropDis2 / 1000m; } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } swFeat = swComp.FeatureByName("AN3"); if (item.ANDropNo > 2) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D2@Sketch10").SystemValue = item.ANDropDis3 / 1000m; } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } if (item.ANDropNo > 3) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D2@Sketch11").SystemValue = item.ANDropDis4 / 1000m; } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } if (item.ANDropNo > 4) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D2@Sketch12").SystemValue = item.ANDropDis5 / 1000m; } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } swFeat = swComp.FeatureByName("ANDTEC1"); if (item.ANDetectorNo > 0) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D3@Sketch13").SystemValue = item.ANDetectorDis1 / 1000m; if (item.ANDetectorEnd == "RIGHT") { swPart.Parameter("D1@Sketch13").SystemValue = 195m / 1000m; } else { swPart.Parameter("D1@Sketch13").SystemValue = 175m / 1000m; } } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } swFeat = swComp.FeatureByName("ANDTEC2"); if (item.ANDetectorNo > 1) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D3@Sketch14").SystemValue = item.ANDetectorDis2 / 1000m; if (item.ANDetectorEnd == "RIGHT") { swPart.Parameter("D1@Sketch14").SystemValue = 195m / 1000m; } else { swPart.Parameter("D1@Sketch14").SystemValue = 175m / 1000m; } } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } swFeat = swComp.FeatureByName("ANDTEC3"); if (item.ANDetectorNo > 2) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D3@Sketch15").SystemValue = item.ANDetectorDis3 / 1000m; if (item.ANDetectorEnd == "RIGHT") { swPart.Parameter("D1@Sketch15").SystemValue = 195m / 1000m; } else { swPart.Parameter("D1@Sketch15").SystemValue = 175m / 1000m; } } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } swFeat = swComp.FeatureByName("ANDTEC4"); if (item.ANDetectorNo > 3) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D3@Sketch16").SystemValue = item.ANDetectorDis4 / 1000m; if (item.ANDetectorEnd == "RIGHT") { swPart.Parameter("D1@Sketch16").SystemValue = 195m / 1000m; } else { swPart.Parameter("D1@Sketch16").SystemValue = 175m / 1000m; } } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } swFeat = swComp.FeatureByName("ANDTEC5"); if (item.ANDetectorNo > 4) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D3@Sketch17").SystemValue = item.ANDetectorDis5 / 1000m; if (item.ANDetectorEnd == "RIGHT") { swPart.Parameter("D1@Sketch17").SystemValue = 195m / 1000m; } else { swPart.Parameter("D1@Sketch17").SystemValue = 175m / 1000m; } } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } } if (item.MARVEL == "NO") { swFeat = swComp.FeatureByName("MA1"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("MA2"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 swFeat = swComp.FeatureByName("MA3"); swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } else { swFeat = swComp.FeatureByName("MA1"); if (item.IRNo > 0) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D2@Sketch18").SystemValue = item.ANYDis / 1000m; swPart.Parameter("D1@Sketch18").SystemValue = item.IRDis1 / 1000m; } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } swFeat = swComp.FeatureByName("MA2"); if (item.IRNo > 1) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D1@Sketch19").SystemValue = item.IRDis2 / 1000m; } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } swFeat = swComp.FeatureByName("MA3"); if (item.IRNo > 2) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swPart.Parameter("D1@Sketch20").SystemValue = item.IRDis3 / 1000m; } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } } } //----------ANSUL腔侧板---------- swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0001-1")); swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D2@Sketch2").SystemValue = (item.Width - 2m) / 1000m; swFeat = swComp.FeatureByName("ANDTEC HOLE"); if (item.ANSUL == "YES" && item.ANDetectorNo > 0) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } swModel.ForceRebuild3(true); //设置成true,直接更新顶层,速度很快,设置成false,每个零件都会更新,很慢 swModel.Save(); //保存,很耗时间 swApp.CloseDoc(packedAssyPath); //关闭,很快 } catch (Exception ex) { throw new Exception(packedAssyPath + "作图过程发生异常,详细:" + ex.Message); } finally { swApp.CommandInProgress = false; //及时关闭外部命令调用,否则影响SolidWorks的使用 } }