public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Module + "-" +
tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
KCJSB535 item = (KCJSB535)objKCJSB535Service.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
ModelDocExtension swModelDocExt = default(ModelDocExtension);
bool status = false;
string compReName = string.Empty;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称
swModelDocExt = (ModelDocExtension)swModel.Extension;
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true);
//TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
int fcNo = (int)((item.Length - item.FCSideLeft - item.FCSideRight) / 499m) - item.FCBlindNo;
try
{
//----------Top Level----------
//判断FC数量，FC侧板长度
if (item.FCBlindNo > 0)
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0107[BP-500]{500}-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swFeat = swAssy.FeatureByName("LocalLPattern4");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern4").SystemValue = item.FCBlindNo; //D1阵列数量,D3阵列距离
swModel.Parameter("D1@Distance35").SystemValue = item.FCSideLeft / 1000m;
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0107[BP-500]{500}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swFeat = swAssy.FeatureByName("LocalLPattern4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//判断FC/KSA
if (item.FCType == "KSA")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5202040401-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern5");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern5").SystemValue = fcNo; //D1阵列数量,D3阵列距离
swModel.Parameter("D1@Distance37").SystemValue = (item.FCSideLeft + 500m * item.FCBlindNo) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "KCJ FC FILTER-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "KCJ FC FILTER-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern3");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern3").SystemValue = fcNo; //D1阵列数量,D3阵列距离
swModel.Parameter("D1@Distance36").SystemValue = (item.FCSideLeft + 500m * item.FCBlindNo) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5202040401-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//----------油网侧板----------
switch (item.FCSide)
{
case "LEFT":
//重命名装配体内部
if (item.FCType == "KSA")
{
compReName = "FNCE0108[BP-" + tree.Module + "]{" + (int)(item.FCSideLeft + fcNo * 2.5m) + "}";
}
else
{
compReName = "FNCE0108[BP-" + tree.Module + "]{" + (int)(item.FCSideLeft - 4m) + "}";
}
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
if (item.FCType == "KSA")
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft + fcNo * 2.5m) / 1000m;
}
else
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft - 4m) / 1000m;
}
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
case "RIGHT":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
//重命名装配体内部
if (item.FCType == "KSA")
{
compReName = "FNCE0109[BP-" + tree.Module + "]{" + (int)(item.FCSideRight + fcNo * 2.5m) + "}";
}
else
{
compReName = "FNCE0109[BP-" + tree.Module + "]{" + (int)(item.FCSideRight - 4m) + "}";
}
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
if (item.FCType == "KSA")
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight + fcNo * 2.5m) / 1000m;
}
else
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight - 4m) / 1000m;
}
}
break;
case "BOTH":
//重命名装配体内部
if (item.FCType == "KSA")
{
compReName = "FNCE0108[BP-" + tree.Module + ".1]{" + (int)(item.FCSideLeft + fcNo * 1.25m) + "}";
}
else
{
compReName = "FNCE0108[BP-" + tree.Module + "]{" + (int)(item.FCSideLeft - 2m) + "}";
}
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
if (item.FCType == "KSA")
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft + fcNo * 1.25m) / 1000m;
}
else
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft - 2m) / 1000m;
}
}
//重命名装配体内部
if (item.FCType == "KSA")
{
compReName = "FNCE0109[BP-" + tree.Module + ".2]{" + (int)(item.FCSideRight + fcNo * 1.25m) + "}";
}
else
{
compReName = "FNCE0109[BP-" + tree.Module + "]{" + (int)(item.FCSideRight - 2m) + "}";
}
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
if (item.FCType == "KSA")
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight + fcNo * 1.25m) / 1000m;
}
else
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight - 2m) / 1000m;
}
}
break;
default:
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
}
//----------日本项目需要压缩零件----------
if (item.Japan == "YES")
{
//吊装垫片
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-9"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//排风脖颈
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXSPIGOT-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
//排风滑门
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXDOOR-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
//排风腔
//重命名装配体内部
compReName = "FNCE0111[KCJSB535-" + tree.Module + "]{" + (int)item.Length + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0111-2") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-2" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-2");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Linear austragen1").SystemValue = item.Length / 1000m;
swFeat = swComp.FeatureByName("EX");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("Cut-Extrude4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
if (item.MARVEL == "YES")
{
swFeat = swComp.FeatureByName("MA-NTC");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA-TAB");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("MA-NTC");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA-TAB");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
}
else
{
//吊装垫片
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-9"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(2, 2, configNames); //参数1：1解压，0压缩
//排风脖颈
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXSPIGOT-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0019-1"));
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@基体-法兰1").SystemValue = (item.ExLength + 50m) / 1000m;
swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m;
swFeat = swComp.FeatureByName("ANSUL");
if (item.ANSUL == "YES")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0020-1"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D2@基体-法兰1").SystemValue = (item.ExLength + 50m) / 1000m;
swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0047-1"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D2@基体-法兰1").SystemValue = item.ExWidth / 1000m;
swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m;
swFeat = swComp.FeatureByName("ANDTEC");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0048-2"));
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@基体-法兰1").SystemValue = item.ExWidth / 1000m;
swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m;
swFeat = swComp.FeatureByName("ANDTEC");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//排风滑门
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXDOOR-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Distance3").SystemValue = (item.ExWidth + 20m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0018-1"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.ExLength * 2m + 100m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0013-1"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D1@Sketch1").SystemValue = (item.ExLength / 2m + 10m) / 1000m;
swPart.Parameter("D2@Sketch1").SystemValue = (item.ExWidth + 40m) / 1000m;
//排风腔
//重命名装配体内部
compReName = "FNCE0111[KCJSB535-" + tree.Module + "]{" + (int)item.Length + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0111-2") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-2" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-2");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Linear austragen1").SystemValue = item.Length / 1000m;
swFeat = swComp.FeatureByName("EX");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("Cut-Extrude4");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch1").SystemValue = item.ExRightDis / 1000m;
swPart.Parameter("D1@Sketch1").SystemValue = item.ExLength / 1000m;
swPart.Parameter("D2@Sketch1").SystemValue = item.ExWidth / 1000m;
if (item.ANSUL == "YES")
{
//侧喷
if (item.ANSide == "LEFT")
{
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else if (item.ANSide == "RIGHT")
{
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//探测器
if (item.ANDetector == "LEFT")
{
swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else if (item.ANDetector == "RIGHT")
{
swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.ANDetector == "BOTH")
{
swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
else
{
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
if (item.MARVEL == "YES")
{
swFeat = swComp.FeatureByName("MA-NTC");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA-TAB");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("MA-NTC");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA-TAB");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
if (item.LightCable == "LEFT")
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.LightCable == "RIGHT")
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
//----------灯腔----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0112-1"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D1@Linear austragen1").SystemValue = item.Length / 1000m;
swFeat = swComp.FeatureByName("FC SUPPORT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("JAP LED M8");
if (item.Japan == "YES")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("LIGHT T8");
if (item.LightType == "T8")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
if (item.LightCable == "LEFT")
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.LightCable == "RIGHT")
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0056-1"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D1@Skizze1").SystemValue = item.Length / 1000m;
//----------SSP灯板支撑条----------
if (item.SSPType == "DOME")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0036-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0035-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Sketch1").SystemValue = item.Length / 1000m;
if (item.Gutter == "YES")
{
swModel.Parameter("D1@Distance34").SystemValue = item.GutterWidth / 1000m;
}
else
{
swModel.Parameter("D1@Distance34").SystemValue = 0.5m / 1000m;
}
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0036-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Sketch1").SystemValue = item.Length / 1000m;
if (item.Gutter == "YES")
{
swModel.Parameter("D1@Distance32").SystemValue = item.GutterWidth / 1000m;
}
else
{
swModel.Parameter("D1@Distance32").SystemValue = 0.5m / 1000m;
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0035-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
LFUSA item = (LFUSA)objLFUSAService.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
ModelDocExtension swModelDocExt = default(ModelDocExtension);
bool status = false;
string compReName = string.Empty;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称
swModelDocExt = (ModelDocExtension)swModel.Extension;
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true);
//TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
try
{
//----------Top Level----------
//----------散流器主体----------
//重命名装配体内部
compReName = "FNCA0001[LFUSA-" + tree.Module + "]{" + (int)item.Length + "}(" + (int)item.Width + ")";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCA0001-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Base-Flange1").SystemValue = item.Length / 1000m;
swPart.Parameter("D1@Sketch1").SystemValue = (item.Width - 2m) / 1000m;
swPart.Parameter("D2@Sketch2").SystemValue = item.SuDia / 1000m;
swPart.Parameter("D1@Sketch2").SystemValue =
(item.SuDis * (item.SuNo / 2m - 1m) + item.SuDis / 2m) / 1000m;
if (item.SuNo < 2)
{
swFeat = swComp.FeatureByName("LPattern1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("LPattern1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@LPattern1").SystemValue = item.SuNo;
swPart.Parameter("D3@LPattern1").SystemValue = item.SuDis / 1000m;
}
swFeat = swComp.FeatureByName("HANGERHOLE");
if (item.Japan == "YES")
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("CUTLEFT");
if (item.SidePanel == "LEFT" || item.SidePanel == "BOTH")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("CUTRIGHT");
if (item.SidePanel == "RIGHT" || item.SidePanel == "BOTH")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
//----------侧板----------
switch (item.SidePanel)
{
case "LEFT":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Sketch1").SystemValue = (item.Width - 2m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-4"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D9@Skizze1").SystemValue = (item.Width - 2m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
case "RIGHT":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-4"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-3"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Sketch1").SystemValue = (item.Width - 2m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-3"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D9@Skizze1").SystemValue = (item.Width - 2m) / 1000m;
break;
case "MIDDLE":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-4"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-3"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D9@Skizze1").SystemValue = (item.Width - 2m) / 1000m;
break;
default:
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Sketch1").SystemValue = (item.Width - 2m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-4"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-3"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
}
if (item.Japan == "YES")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-9"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-9"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
CJ300 item = (CJ300)objCJ300Service.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
ModelDocExtension swModelDocExt = default(ModelDocExtension);
bool status = false;
string compReName = string.Empty;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称
swModelDocExt = (ModelDocExtension)swModel.Extension;
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true);
//TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
int cjNo = (int)((item.Length - 40m) / 30m);//天花烟罩马蹄形CJ孔阵列距离为30
decimal firstCjDis = (item.Length - 30m * cjNo) / 2;
if (firstCjDis < 15m)
{
cjNo--;
firstCjDis = firstCjDis + 15m;
}
decimal leftSBDis = item.LeftDis;
decimal rightSBDis = item.RightDis;
try
{
//----------Top Level----------
//----------脖颈----------
if (item.SuType == "UP")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0010-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201990413-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0010-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201990413-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
}
//----------侧板----------
switch (item.SidePanel)
{
case "LEFT":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0017-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0019-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0018-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0019-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
case "RIGHT":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0017-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0019-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0018-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0019-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
break;
case "MIDDLE":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0017-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0019-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0018-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0019-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
break;
default:
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0017-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0019-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0018-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0019-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
}
//----------CJ腔主体----------
//重命名装配体内部
compReName = "FNCJ0020[CJ300-" + tree.Module + "]{" + (int)item.Length + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCJ0020-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Skizze1").SystemValue = item.Length / 1000m;
swPart.Parameter("D1@LPattern7").SystemValue = cjNo + 1;
swPart.Parameter("D3@Skizze18").SystemValue = firstCjDis / 1000m;
//BCJ
if (item.BackCJSide == "LEFT" || item.BackCJSide == "BOTH")
{
swFeat = swComp.FeatureByName("BCJ-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D11@Sketch19").SystemValue = (item.LeftDis + 1m) / 1000m;
leftSBDis = leftSBDis + 90m;
}
else
{
swFeat = swComp.FeatureByName("BCJ-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
if (item.BackCJSide == "RIGHT" || item.BackCJSide == "BOTH")
{
swFeat = swComp.FeatureByName("BCJ-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D11@Sketch20").SystemValue = (item.RightDis + 1m) / 1000m;
rightSBDis = rightSBDis + 90m;
}
else
{
swFeat = swComp.FeatureByName("BCJ-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//----------左----------
//左类型排风腔KCJDB800
if (item.LeftBeamType == "KCJDB800" || item.LeftBeamType == "UCJDB800")
{
swFeat = swComp.FeatureByName("BCJ-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("KCJDB800-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D59@Sketch46").SystemValue = (item.LeftBeamDis + 1m) / 1000m;
if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D6@Sketch48").SystemValue = (item.Length - item.LeftBeamDis + 1m) / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("KCJDB800-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//左类型排风腔KCWDB800
if (item.LeftBeamType == "KCWDB800" || item.LeftBeamType == "UCWDB800")
{
swFeat = swComp.FeatureByName("BCJ-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("KCWDB800-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D31@Sketch32").SystemValue = (item.LeftBeamDis + 1m) / 1000m;
if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D6@Sketch48").SystemValue = (item.Length - item.LeftBeamDis + 1m) / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("KCWDB800-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//左类型排风腔KCJSB535
if (item.LeftBeamType == "KCJSB535" || item.LeftBeamType == "UCJSB535")
{
swFeat = swComp.FeatureByName("KCJSB535-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D46@Sketch35").SystemValue = (leftSBDis + 1m) / 1000m;
if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 535m + 1m) / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("KCJSB535-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//左类型排风腔KCWSB535
if (item.LeftBeamType == "KCWSB535" || item.LeftBeamType == "UCWSB535")
{
swFeat = swComp.FeatureByName("KCWSB535-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D23@Sketch28").SystemValue = (leftSBDis + 1m) / 1000m;
if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 535m + 1m) / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("KCWSB535-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//左类型排风腔UCJSB385
if (item.LeftBeamType == "UCJSB385")
{
swFeat = swComp.FeatureByName("UCJSB385-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D16@Sketch43").SystemValue = (leftSBDis + 1m) / 1000m;
if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 385m + 1m) / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("UCJSB385-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//左类型排风腔KCJSB290
if (item.LeftBeamType == "KCJSB290")
{
swFeat = swComp.FeatureByName("KCJSB290-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D14@Sketch41").SystemValue = (leftSBDis + 1m) / 1000m;
if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 290m + 1m) / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("KCJSB290-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//左类型排风腔KCJSB265
if (item.LeftBeamType == "KCJSB265")
{
swFeat = swComp.FeatureByName("KCJSB265-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D23@Sketch28").SystemValue = (leftSBDis + 1m) / 1000m;
if (item.LKSide == "LEFT" || item.LKSide == "BOTH")
{
swFeat = swComp.FeatureByName("LKS270-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D24@Sketch51").SystemValue = (leftSBDis + 265m + 1m) / 1000m;
if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 270m + 265m + 1m) / 1000m;
}
}
else
{
if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 265m + 1m) / 1000m;
}
}
}
else
{
swFeat = swComp.FeatureByName("KCJSB265-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//左类型排风腔KCWSB265
if (item.LeftBeamType == "KCWSB265")
{
swFeat = swComp.FeatureByName("KCWSB265-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D15@Sketch22").SystemValue = (leftSBDis + 1m) / 1000m;
if (item.LKSide == "LEFT" || item.LKSide == "BOTH")
{
swFeat = swComp.FeatureByName("LKS270-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D24@Sketch51").SystemValue = (leftSBDis + 265m + 1m) / 1000m;
if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 270m + 265m + 1m) / 1000m;
}
}
else
{
if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 265m + 1m) / 1000m;
}
}
}
else
{
swFeat = swComp.FeatureByName("KCWSB265-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//----------右----------
//右类型排风腔KCJDB800
if (item.RightBeamType == "KCJDB800" || item.RightBeamType == "UCJDB800")
{
swFeat = swComp.FeatureByName("BCJ-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("KCJDB800-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D59@Sketch47").SystemValue = (item.RightBeamDis + 1m) / 1000m;
if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch50").SystemValue =
(item.Length - item.RightBeamDis + 1m) / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("KCJDB800-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//右类型排风腔KCWDB800
if (item.RightBeamType == "KCWDB800" || item.RightBeamType == "UCWDB800")
{
swFeat = swComp.FeatureByName("BCJ-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("KCWDB800-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D31@Sketch45").SystemValue = (item.RightBeamDis + 1m) / 1000m;
if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch50").SystemValue =
(item.Length - item.RightBeamDis + 1m) / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("KCWDB800-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//右类型排风腔KCJSB535
if (item.RightBeamType == "KCJSB535" || item.RightBeamType == "UCJSB535")
{
swFeat = swComp.FeatureByName("KCJSB535-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D46@Sketch37").SystemValue = (rightSBDis + 1m) / 1000m;
if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 535m + 1m) / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("KCJSB535-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//右类型排风腔KCWSB535
if (item.RightBeamType == "KCWSB535" || item.RightBeamType == "UCWSB535")
{
swFeat = swComp.FeatureByName("KCWSB535-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D23@Sketch29").SystemValue = (rightSBDis + 1m) / 1000m;
if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 535m + 1m) / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("KCWSB535-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//右类型排风腔UCJSB385
if (item.RightBeamType == "UCJSB385")
{
swFeat = swComp.FeatureByName("UCJSB385-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D16@Sketch44").SystemValue = (rightSBDis + 1m) / 1000m;
if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 385m + 1m) / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("UCJSB385-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//右类型排风腔KCJSB290
if (item.RightBeamType == "KCJSB290")
{
swFeat = swComp.FeatureByName("KCJSB290-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D14@Sketch42").SystemValue = (rightSBDis + 1m) / 1000m;
if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 290m + 1m) / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("KCJSB290-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//右类型排风腔KCJSB265
if (item.RightBeamType == "KCJSB265")
{
swFeat = swComp.FeatureByName("KCJSB265-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch55").SystemValue = (rightSBDis + 1m) / 1000m;
if (item.LKSide == "RIGHT" || item.LKSide == "BOTH")
{
swFeat = swComp.FeatureByName("LKS270-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D24@Sketch53").SystemValue = (rightSBDis + 265m + 1m) / 1000m;
if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 270m + 265m + 1m) / 1000m;
}
}
else
{
if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 265m + 1m) / 1000m;
}
}
}
else
{
swFeat = swComp.FeatureByName("KCJSB265-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//右类型排风腔KCWSB265
if (item.RightBeamType == "KCWSB265")
{
swFeat = swComp.FeatureByName("KCWSB265-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D14@Sketch23").SystemValue = (rightSBDis + 1m) / 1000m;
if (item.LKSide == "RIGHT" || item.LKSide == "BOTH")
{
swFeat = swComp.FeatureByName("LKS270-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D24@Sketch53").SystemValue = (rightSBDis + 265m + 1m) / 1000m;
if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 270m + 265m + 1m) / 1000m;
}
}
else
{
if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 265m + 1m) / 1000m;
}
}
}
else
{
swFeat = swComp.FeatureByName("KCWSB265-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
//----------其他零件----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0016-1"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D2@Sketch1").SystemValue = (item.Length - 10m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0021-1"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D1@Skizze1").SystemValue = item.Length / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCJ0022-1"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D4@Skizze1").SystemValue = item.Length / 1000m;
swPart.Parameter("D4@Skizze3").SystemValue = item.SuDis / 1000m;
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
SSPTSD item = (SSPTSD)objSSPTSDService.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
ModelDocExtension swModelDocExt = default(ModelDocExtension);
bool status = false;
string compReName = string.Empty;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称
swModelDocExt = (ModelDocExtension)swModel.Extension;
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true);
//TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
int supportNo = item.MPanelNo * 2 - 1;//计算支撑板数量
if (item.LeftType == "Z" && item.RightType == "Z")
{
supportNo = supportNo * 2 + 8;
}
else if (item.LeftType == "W" && item.RightType == "W")
{
supportNo = supportNo * 2 + 4;
}
else if ((item.LeftType == "Z" && item.RightType == "W") || (item.LeftType == "W" && item.RightType == "Z"))
{
supportNo = supportNo * 2 + 6;
}
try
{
//----------Top Level----------
swModel.Parameter("D1@LocalLPattern3").SystemValue = supportNo;
//----------边缘Z板----------
swModel.Parameter("D1@Distance16").SystemValue = (item.MPanelNo * 2m - 1m) * 500m / 1000m;
//左边
if (item.LeftType == "Z")
{
//重命名装配体内部
compReName = "FNCM0013[SSPDZ-" + tree.Module + ".L]{" + (int)(item.Length - 10m) + "}(" + (int)item.LeftLength + ")";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCM0013-L[SSPDZ-]{}()-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Skizze1").SystemValue = (item.Length - 540m) / 1000m;
swPart.Parameter("D1@Skizze1").SystemValue = item.LeftLength / 1000m;
swFeat = swComp.FeatureByName("LED");
if (item.LightType == "LED60")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
//重命名装配体内部
compReName = "FNCM0011[SSPDW-" + tree.Module + ".L]{" + (int)(item.Length - 10m) + "}(500)";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCM0011-L[SSPDW-]{}()-4") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-4" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-4");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Skizze1").SystemValue = (item.Length - 540m) / 1000m;
swPart.Parameter("D1@Skizze1").SystemValue = 499.5m / 1000m;
swFeat = swComp.FeatureByName("LED");
if (item.LightType == "LED60")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCM0013-L[SSPDZ-]{}()-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
//重命名装配体内部
compReName = "FNCM0011[SSPDW-" + tree.Module + ".L]{" + (int)(item.Length - 10m) + "}(" + (int)item.LeftLength + ")";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCM0011-L[SSPDW-]{}()-4") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-4" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-4");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Skizze1").SystemValue = (item.Length - 540m) / 1000m;
swPart.Parameter("D1@Skizze1").SystemValue = item.LeftLength / 1000m;
swFeat = swComp.FeatureByName("LED");
if (item.LightType == "LED60")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
}
//右边
if (item.RightType == "Z")
{
//重命名装配体内部
compReName = "FNCM0013[SSPDZ-" + tree.Module + ".R]{" + (int)(item.Length - 10m) + "}(" + (int)item.RightLength + ")";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCM0013-R[SSPDZ-]{}()-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Skizze1").SystemValue = (item.Length - 540m) / 1000m;
swPart.Parameter("D1@Skizze1").SystemValue = item.RightLength / 1000m;
swFeat = swComp.FeatureByName("LED");
if (item.LightType == "LED60")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
//重命名装配体内部
compReName = "FNCM0011[SSPDW-" + tree.Module + ".R]{" + (int)(item.Length - 10m) + "}(500)";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCM0011-R[SSPDW-]{}()-5") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-5" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-5");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Skizze1").SystemValue = (item.Length - 540m) / 1000m;
swPart.Parameter("D1@Skizze1").SystemValue = 499.5m / 1000m;
swFeat = swComp.FeatureByName("LED");
if (item.LightType == "LED60")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCM0013-R[SSPDZ-]{}()-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
//重命名装配体内部
compReName = "FNCM0011[SSPDW-" + tree.Module + ".R]{" + (int)(item.Length - 10m) + "}(" + (int)item.RightLength + ")";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCM0011-R[SSPDW-]{}()-5") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-5" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-5");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Skizze1").SystemValue = (item.Length - 540m) / 1000m;
swPart.Parameter("D1@Skizze1").SystemValue = item.RightLength / 1000m;
swFeat = swComp.FeatureByName("LED");
if (item.LightType == "LED60")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
}
//----------标准M板----------
//重命名装配体内部
compReName = "FNCM0012[SSPDM-" + tree.Module + "]{" + (int)(item.Length - 10m) + "}(500)";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCM0012[SSPDM-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Skizze1").SystemValue = (item.Length - 540m) / 1000m;
swPart.Parameter("D1@Skizze1").SystemValue = 499.5m / 1000m;
swFeat = swComp.FeatureByName("LED");
if (item.LightType == "LED60")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
//----------标准W板----------
if (item.MPanelNo == 1)
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCM0011[SSPDW-]{}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
//重命名装配体内部
compReName = "FNCM0011[SSPDW-" + tree.Module + "]{" + (int)(item.Length - 10m) + "}(500)";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCM0011[SSPDW-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Skizze1").SystemValue = (item.Length - 540m) / 1000m;
swPart.Parameter("D1@Skizze1").SystemValue = 499.5m / 1000m;
swFeat = swComp.FeatureByName("LED");
if (item.LightType == "LED60")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
swFeat = swAssy.FeatureByName("LocalLPattern2");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern2").SystemValue = item.MPanelNo;
swModel.Parameter("D1@LocalLPattern1").SystemValue = item.MPanelNo - 1;
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
LLKS item = (LLKS)objLLKSService.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
ModelDocExtension swModelDocExt = default(ModelDocExtension);
bool status = false;
string compReName = string.Empty;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称
swModelDocExt = (ModelDocExtension)swModel.Extension;
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true);
//TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
decimal sideLength = (item.Length - 17m - item.LongGlassNo * 1175m - item.ShortGlassNo * 575m) / 2;//长玻璃1158+17，558+17
int longGlassNo = item.LongGlassNo;
while (sideLength < 29m)
{
sideLength = sideLength + 1175m / 2m;//如果侧板太短，则减一块玻璃
longGlassNo--;
}
try
{
//----------Top Level----------
swModel.Parameter("D1@Distance3").SystemValue = item.Length / 1000m;
//----------边缘板----------
//重命名装配体内部
compReName = "FNCL0025[LLKS-" + tree.Module + "]{" + (int)sideLength + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCL0025[LLKS-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Skizze1").SystemValue = sideLength / 1000m;
}
//----------长玻璃----------
if (longGlassNo > 0)
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600010-7"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600010-7"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
swFeat = swAssy.FeatureByName("LocalLPattern1");
if (longGlassNo > 1)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern1").SystemValue = longGlassNo;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//----------短玻璃----------
if (item.ShortGlassNo > 0)
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600011-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-6"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600011-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-6"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
swFeat = swAssy.FeatureByName("LocalLPattern2");
if (item.ShortGlassNo > 1)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern2").SystemValue = item.ShortGlassNo;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
BF200 item = (BF200)objBF200Service.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swSubModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
AssemblyDoc swSubAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
ModelDocExtension swModelDocExt = default(ModelDocExtension);
ModelDocExtension swSubModelDocExt = default(ModelDocExtension);
bool status = false;
string compReName = string.Empty;
string subAssyName = string.Empty;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称
swModelDocExt = (ModelDocExtension)swModel.Extension;
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true);
//TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
try
{
//----------Top Level----------
swModel.Parameter("D1@Distance36").SystemValue = (item.Length - 3m) / 1000m;
//----------M型水洗挡板----------
if (item.MPanelNo == 0)
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "BFM-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "BFW-8"));
swComp.SetSuppression2(0); //2解压缩，0压缩. .
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "BFM-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swSubAssy = swComp.GetModelDoc2(); //打开子装配
swSubModel = (ModelDoc2)swSubAssy;
subAssyName = swSubModel.GetTitle().Substring(0, swSubModel.GetTitle().Length - 7); //获取装配体名称
swSubModelDocExt = (ModelDocExtension)swSubModel.Extension;
//重命名装配体内部
compReName = "FNCE0120[BFM-" + tree.Module + "]{" + (int)item.MPanelLength + "}";
status = swSubModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0120[BFM-]{}-1") + "@" + subAssyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swSubModelDocExt.RenameDocument(compReName);
}
swSubModel.ClearSelection2(true);
status = swSubModelDocExt.SelectByID2(compReName + "-1" + "@" + subAssyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swSubModel.ClearSelection2(true);
if (status)
{
swComp = swSubAssy.GetComponentByName(compReName + "-1");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Sketch1").SystemValue = item.MPanelLength / 1000m;
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "BFW-8"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swSubAssy = swComp.GetModelDoc2(); //打开子装配
if (item.UVType == "YES")
{
swComp = swSubAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0124-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swSubAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2900100016-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
}
else
{
swComp = swSubAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0124-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swSubAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2900100016-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern1").SystemValue = item.MPanelNo;
swModel.Parameter("D3@LocalLPattern1").SystemValue = (item.MPanelLength + item.WPanelLength) / 1000m;
}
//----------W型水洗挡板----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "BFWF-8"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swSubAssy = swComp.GetModelDoc2(); //打开子装配
swSubModel = (ModelDoc2)swSubAssy;
subAssyName = swSubModel.GetTitle().Substring(0, swSubModel.GetTitle().Length - 7); //获取装配体名称
swSubModelDocExt = (ModelDocExtension)swSubModel.Extension;
if (item.UVType == "YES")
{
swComp = swSubAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0124-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swSubAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2900100016-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
}
else
{
swComp = swSubAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0124-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swSubAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2900100016-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
//重命名装配体内部
compReName = "FNCE0121[BFW-" + tree.Module + "]{" + (int)item.WPanelLength + "}";
status = swSubModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0121[BFW-]{}-1") + "@" + subAssyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swSubModelDocExt.RenameDocument(compReName);
}
swSubModel.ClearSelection2(true);
status = swSubModelDocExt.SelectByID2(compReName + "-1" + "@" + subAssyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swSubModel.ClearSelection2(true);
if (status)
{
swComp = swSubAssy.GetComponentByName(compReName + "-1");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Sketch1").SystemValue = item.WPanelLength / 1000m;
swFeat = swComp.FeatureByName("Cut-Extrude8");
if (item.UVType == "YES")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
//----------UL水洗挡板----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "BFUL-1"));
swSubAssy = swComp.GetModelDoc2(); //打开子装配
swSubModel = (ModelDoc2)swSubAssy;
subAssyName = swSubModel.GetTitle().Substring(0, swSubModel.GetTitle().Length - 7); //获取装配体名称
swSubModelDocExt = (ModelDocExtension)swSubModel.Extension;
//重命名装配体内部
compReName = "FNCE0119[BFUL-" + tree.Module + "]{" + (int)(item.LeftLength - 7) + "}";
status = swSubModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0119[BFUL-]{}-1") + "@" + subAssyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swSubModelDocExt.RenameDocument(compReName);
}
swSubModel.ClearSelection2(true);
status = swSubModelDocExt.SelectByID2(compReName + "-1" + "@" + subAssyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swSubModel.ClearSelection2(true);
if (status)
{
swComp = swSubAssy.GetComponentByName(compReName + "-1");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Sketch1").SystemValue = (item.LeftLength - 7m) / 1000m;
}
//----------UR水洗挡板----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "BFUR-1"));
swSubAssy = swComp.GetModelDoc2(); //打开子装配
swSubModel = (ModelDoc2)swSubAssy;
subAssyName = swSubModel.GetTitle().Substring(0, swSubModel.GetTitle().Length - 7); //获取装配体名称
swSubModelDocExt = (ModelDocExtension)swSubModel.Extension;
//重命名装配体内部
compReName = "FNCE0118[BFUR-" + tree.Module + "]{" + (int)(item.RightLength - 7) + "}";
status = swSubModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0118[BFUR-]{}-1") + "@" + subAssyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swSubModelDocExt.RenameDocument(compReName);
}
swSubModel.ClearSelection2(true);
status = swSubModelDocExt.SelectByID2(compReName + "-1" + "@" + subAssyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swSubModel.ClearSelection2(true);
if (status)
{
swComp = swSubAssy.GetComponentByName(compReName + "-1");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Sketch1").SystemValue = (item.RightLength - 7m) / 1000m;
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
AN item = (AN)objANService.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
ModelDocExtension swModelDocExt = default(ModelDocExtension);
bool status = false;
string compReName = string.Empty;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称
swModelDocExt = (ModelDocExtension)swModel.Extension;
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true);
//TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
try
{
//----------Top Level----------
//----------IR保护支架----------
if (item.MARVEL == "NO")
{
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swAssy.FeatureByName("LocalLPattern2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCB0001-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCB0001-1"));
if (item.IRNo > 0)
{
swComp.SetSuppression2(2); //2解压缩，0压缩.
}
else
{
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
swFeat = swAssy.FeatureByName("LocalLPattern1");
if (item.IRNo > 1)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D3@LocalLPattern1").SystemValue = item.IRDis2 / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swAssy.FeatureByName("LocalLPattern2");
if (item.IRNo > 2)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D3@LocalLPattern2").SystemValue = (item.IRDis2 + item.IRDis3) / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
//----------ANSUL探测器盒子----------
if (item.ANSUL == "NO")
{
swFeat = swAssy.FeatureByName("LocalLPattern3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swAssy.FeatureByName("LocalLPattern4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swAssy.FeatureByName("LocalLPattern5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swAssy.FeatureByName("LocalLPattern6");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201990405-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201990405-1"));
if (item.ANDetectorNo > 0)
{
swComp.SetSuppression2(2); //2解压缩，0压缩.
}
else
{
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
swFeat = swAssy.FeatureByName("LocalLPattern3");
if (item.ANDetectorNo > 1)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D3@LocalLPattern3").SystemValue = item.ANDetectorDis2 / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swAssy.FeatureByName("LocalLPattern4");
if (item.ANDetectorNo > 2)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D3@LocalLPattern4").SystemValue = (item.ANDetectorDis2 + item.ANDetectorDis3) / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swAssy.FeatureByName("LocalLPattern5");
if (item.ANDetectorNo > 2)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D3@LocalLPattern5").SystemValue = (item.ANDetectorDis2 + item.ANDetectorDis3 + item.ANDetectorDis4) / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swAssy.FeatureByName("LocalLPattern6");
if (item.ANDetectorNo > 2)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D3@LocalLPattern6").SystemValue = (item.ANDetectorDis2 + item.ANDetectorDis3 + item.ANDetectorDis4 + item.ANDetectorDis5) / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
//----------ANSUL腔体----------
//重命名装配体内部
compReName = "FNCE0025[AN-" + tree.Module + "]{" + (int)item.Length + "}(" + (int)item.Width + ")";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0025-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Base-Flange1").SystemValue = item.Length / 1000m;
swPart.Parameter("D1@Sketch1").SystemValue = item.Width / 1000m;
if (item.ANSUL == "NO")
{
swFeat = swComp.FeatureByName("AN1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("AN1");
if (item.ANDropNo > 0)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch7").SystemValue = item.ANYDis / 1000m;
swPart.Parameter("D2@Sketch7").SystemValue = item.ANDropDis1 / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("AN2");
if (item.ANDropNo > 1)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D2@Sketch9").SystemValue = item.ANDropDis2 / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("AN3");
if (item.ANDropNo > 2)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D2@Sketch10").SystemValue = item.ANDropDis3 / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
if (item.ANDropNo > 3)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D2@Sketch11").SystemValue = item.ANDropDis4 / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
if (item.ANDropNo > 4)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D2@Sketch12").SystemValue = item.ANDropDis5 / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("ANDTEC1");
if (item.ANDetectorNo > 0)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch13").SystemValue = item.ANDetectorDis1 / 1000m;
if (item.ANDetectorEnd == "RIGHT")
{
swPart.Parameter("D1@Sketch13").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D1@Sketch13").SystemValue = 175m / 1000m;
}
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("ANDTEC2");
if (item.ANDetectorNo > 1)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch14").SystemValue = item.ANDetectorDis2 / 1000m;
if (item.ANDetectorEnd == "RIGHT")
{
swPart.Parameter("D1@Sketch14").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D1@Sketch14").SystemValue = 175m / 1000m;
}
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("ANDTEC3");
if (item.ANDetectorNo > 2)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch15").SystemValue = item.ANDetectorDis3 / 1000m;
if (item.ANDetectorEnd == "RIGHT")
{
swPart.Parameter("D1@Sketch15").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D1@Sketch15").SystemValue = 175m / 1000m;
}
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("ANDTEC4");
if (item.ANDetectorNo > 3)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch16").SystemValue = item.ANDetectorDis4 / 1000m;
if (item.ANDetectorEnd == "RIGHT")
{
swPart.Parameter("D1@Sketch16").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D1@Sketch16").SystemValue = 175m / 1000m;
}
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("ANDTEC5");
if (item.ANDetectorNo > 4)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch17").SystemValue = item.ANDetectorDis5 / 1000m;
if (item.ANDetectorEnd == "RIGHT")
{
swPart.Parameter("D1@Sketch17").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D1@Sketch17").SystemValue = 175m / 1000m;
}
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
if (item.MARVEL == "NO")
{
swFeat = swComp.FeatureByName("MA1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("MA1");
if (item.IRNo > 0)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D2@Sketch18").SystemValue = item.ANYDis / 1000m;
swPart.Parameter("D1@Sketch18").SystemValue = item.IRDis1 / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("MA2");
if (item.IRNo > 1)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch19").SystemValue = item.IRDis2 / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("MA3");
if (item.IRNo > 2)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch20").SystemValue = item.IRDis3 / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
}
//----------ANSUL腔侧板----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0001-1"));
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Sketch2").SystemValue = (item.Width - 2m) / 1000m;
swFeat = swComp.FeatureByName("ANDTEC HOLE");
if (item.ANSUL == "YES" && item.ANDetectorNo > 0)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}