// do full tree traversal below iBox to make sure that all child points are contained
void debug_check_child_points_in_box(int iBox)
{
AxisAlignedBox3d box = get_box(iBox);
var t = new TreeTraversal()
{
NextPointF = (vID) =>
{
Vector3d v = points.GetVertex(vID);
if (box.Contains(v) == false)
{
Util.gBreakToDebugger();
}
}
};
tree_traversal(iBox, 0, t);
}
double box_ray_intersect_t(int iBox, Ray3d ray)
{
Vector3d c = box_centers[iBox];
Vector3d e = box_extents[iBox];
AxisAlignedBox3d box = new AxisAlignedBox3d(c - e, c + e);
IntrRay3AxisAlignedBox3 intr = new IntrRay3AxisAlignedBox3(ray, box);
if (intr.Find())
{
return(intr.RayParam0);
}
else
{
Debug.Assert(intr.Result != IntersectionResult.InvalidQuery);
return(double.MaxValue);
}
}
// accumulate point counts and track each box-parent index.
// also checks that points are contained in boxes
private void test_coverage(int[] point_counts, int[] parent_indices, int iBox)
{
int idx = box_to_index[iBox];
debug_check_child_points_in_box(iBox);
if (idx < points_end)
{
// point-list case, array is [N t1 t2 ... tN]
int n = index_list[idx];
AxisAlignedBox3d box = get_box(iBox);
for (int i = 1; i <= n; ++i)
{
int vi = index_list[idx + i];
point_counts[vi]++;
Vector3d v = points.GetVertex(vi);
if (!box.Contains(v))
{
Util.gBreakToDebugger();
}
}
}
else
{
int i0 = index_list[idx];
if (i0 < 0)
{
// negative index means we only have one 'child' box to descend into
i0 = (-i0) - 1;
parent_indices[i0] = iBox;
test_coverage(point_counts, parent_indices, i0);
}
else
{
// positive index, two sequential child box indices to descend into
i0 = i0 - 1;
parent_indices[i0] = iBox;
test_coverage(point_counts, parent_indices, i0);
int i1 = index_list[idx + 1];
i1 = i1 - 1;
parent_indices[i1] = iBox;
test_coverage(point_counts, parent_indices, i1);
}
}
}
public AxisAlignedBox3d ToAABB()
{
// [TODO] probably more efficient way to do this...at minimum can move center-shift
// to after the containments...
Vector3d extAxis0 = Extent.x * AxisX;
Vector3d extAxis1 = Extent.y * AxisY;
Vector3d extAxis2 = Extent.z * AxisZ;
AxisAlignedBox3d result = new AxisAlignedBox3d(Center - extAxis0 - extAxis1 - extAxis2);
result.Contain(Center + extAxis0 - extAxis1 - extAxis2);
result.Contain(Center + extAxis0 + extAxis1 - extAxis2);
result.Contain(Center - extAxis0 + extAxis1 - extAxis2);
result.Contain(Center - extAxis0 - extAxis1 + extAxis2);
result.Contain(Center + extAxis0 - extAxis1 + extAxis2);
result.Contain(Center + extAxis0 + extAxis1 + extAxis2);
result.Contain(Center - extAxis0 + extAxis1 + extAxis2);
return(result);
}
static public bool DoClipping(ref double t0, ref double t1,
Vector3d origin, Vector3d direction,
AxisAlignedBox3d box, bool solid, ref int quantity,
ref Vector3d point0, ref Vector3d point1,
ref IntersectionType intrType)
{
Vector3d BOrigin = origin - box.Center;
Vector3d extent = box.Extents;
double saveT0 = t0, saveT1 = t1;
bool notAllClipped =
Clip(+direction.x, -BOrigin.x - extent.x, ref t0, ref t1) &&
Clip(-direction.x, +BOrigin.x - extent.x, ref t0, ref t1) &&
Clip(+direction.y, -BOrigin.y - extent.y, ref t0, ref t1) &&
Clip(-direction.y, +BOrigin.y - extent.y, ref t0, ref t1) &&
Clip(+direction.z, -BOrigin.z - extent.z, ref t0, ref t1) &&
Clip(-direction.z, +BOrigin.z - extent.z, ref t0, ref t1);
if (notAllClipped && (solid || t0 != saveT0 || t1 != saveT1))
{
if (t1 > t0)
{
intrType = IntersectionType.Segment;
quantity = 2;
point0 = origin + t0 * direction;
point1 = origin + t1 * direction;
}
else
{
intrType = IntersectionType.Point;
quantity = 1;
point0 = origin + t0 * direction;
}
}
else
{
quantity = 0;
intrType = IntersectionType.Empty;
}
return(intrType != IntersectionType.Empty);
}
public static AxisAlignedBox3d BoundsV(IMesh mesh, IEnumerable <int> vertexIndices, Func <Vector3d, Vector3d> TransformF = null)
{
AxisAlignedBox3d bounds = AxisAlignedBox3d.Empty;
if (TransformF == null)
{
foreach (int vid in vertexIndices)
{
bounds.Contain(mesh.GetVertex(vid));
}
}
else
{
foreach (int vid in vertexIndices)
{
bounds.Contain(TransformF(mesh.GetVertex(vid)));
}
}
return(bounds);
}
public void Sample(BoundedImplicitFunction3d f, double expandRadius = 0)
{
AxisAlignedBox3d bounds = f.Bounds();
Vector3d expand = expandRadius * Vector3d.One;
Vector3i gridMin = Indexer.ToGrid(bounds.Min - expand),
gridMax = Indexer.ToGrid(bounds.Max + expand) + Vector3i.One;
gridMin = GridBounds.ClampExclusive(gridMin);
gridMax = GridBounds.ClampExclusive(gridMax);
AxisAlignedBox3i gridbox = new AxisAlignedBox3i(gridMin, gridMax);
switch (CombineMode)
{
case CombineModes.DistanceMinUnion:
sample_min(f, gridbox.IndicesInclusive());
break;
}
}
public static AxisAlignedBox3d Bounds(DMesh3 mesh, Func <Vector3d, Vector3d> TransformF)
{
AxisAlignedBox3d bounds = AxisAlignedBox3d.Empty;
if (TransformF == null)
{
foreach (Vector3d v in mesh.Vertices())
{
bounds.Contain(v);
}
}
else
{
foreach (Vector3d v in mesh.Vertices())
{
Vector3d vT = TransformF(v);
bounds.Contain(ref vT);
}
}
return(bounds);
}
public static AxisAlignedBox3d Bounds(IMesh mesh, Func <Vector3d, Vector3d> TransformF)
{
AxisAlignedBox3d bounds = AxisAlignedBox3d.Empty;
if (TransformF == null)
{
foreach (int vID in mesh.VertexIndices())
{
bounds.Contain(mesh.GetVertex(vID));
}
}
else
{
foreach (int vID in mesh.VertexIndices())
{
Vector3d vT = TransformF(mesh.GetVertex(vID));
bounds.Contain(ref vT);
}
}
return(bounds);
}
/// <summary>
/// Find intersection of ray with AABB, without having to construct any new classes.
/// Returns ray T-value of first intersection (or double.MaxVlaue on miss)
/// </summary>
public static bool FindRayIntersectT(ref Ray3d ray, ref AxisAlignedBox3d box, out double RayParam)
{
double RayParam0 = 0.0;
double RayParam1 = double.MaxValue;
int Quantity = 0;
Vector3d Point0 = Vector3d.Zero;
Vector3d Point1 = Vector3d.Zero;
IntersectionType Type = IntersectionType.Empty;
IntrLine3AxisAlignedBox3.DoClipping(ref RayParam0, ref RayParam1, ref ray.Origin, ref ray.Direction, ref box,
true, ref Quantity, ref Point0, ref Point1, ref Type);
if (Type != IntersectionType.Empty)
{
RayParam = RayParam0;
return(true);
}
else
{
RayParam = double.MaxValue;
return(false);
}
}
/// <summary>
/// calculate extents of mesh along axes of frame, with optional transform
/// </summary>
public static AxisAlignedBox3d BoundsInFrame(DMesh3 mesh, Frame3f frame, Func <Vector3d, Vector3d> TransformF = null)
{
AxisAlignedBox3d bounds = AxisAlignedBox3d.Empty;
if (TransformF == null)
{
foreach (Vector3d v in mesh.Vertices())
{
Vector3d fv = frame.ToFrameP(v);
bounds.Contain(ref fv);
}
}
else
{
foreach (Vector3d v in mesh.Vertices())
{
Vector3d vT = TransformF(v);
Vector3d fv = frame.ToFrameP(ref vT);
bounds.Contain(ref fv);
}
}
return(bounds);
}
public void Compute()
{
// figure out origin & dimensions
AxisAlignedBox3d bounds = Mesh.CachedBounds;
float fBufferWidth = 2 * ExactBandWidth * CellSize;
grid_origin = (Vector3f)bounds.Min - fBufferWidth * Vector3f.One - (Vector3f)ExpandBounds;
Vector3f max = (Vector3f)bounds.Max + fBufferWidth * Vector3f.One + (Vector3f)ExpandBounds;
int ni = (int)((max.x - grid_origin.x) / CellSize) + 1;
int nj = (int)((max.y - grid_origin.y) / CellSize) + 1;
int nk = (int)((max.z - grid_origin.z) / CellSize) + 1;
grid = new DenseGrid3f();
if (UseParallel)
{
make_level_set3_parallel(grid_origin, CellSize, ni, nj, nk, grid, ExactBandWidth);
}
else
{
make_level_set3(grid_origin, CellSize, ni, nj, nk, grid, ExactBandWidth);
}
}
protected bool check_for_cracks(DMesh3 mesh, out int boundary_edge_count, double crack_tol = MathUtil.ZeroTolerancef)
{
boundary_edge_count = 0;
var boundary_verts = new MeshVertexSelection(mesh);
foreach (int eid in mesh.BoundaryEdgeIndices())
{
Index2i ev = mesh.GetEdgeV(eid);
boundary_verts.Select(ev.a); boundary_verts.Select(ev.b);
boundary_edge_count++;
}
if (boundary_verts.Count == 0)
{
return(false);
}
AxisAlignedBox3d bounds = mesh.CachedBounds;
var borderV = new PointHashGrid3d <int>(bounds.MaxDim / 128, -1);
foreach (int vid in boundary_verts)
{
Vector3d v = mesh.GetVertex(vid);
var result = borderV.FindNearestInRadius(v, crack_tol, (existing_vid) =>
{
return(v.Distance(mesh.GetVertex(existing_vid)));
});
if (result.Key != -1)
{
return(true); // we found a crack vertex!
}
borderV.InsertPoint(vid, v);
}
// found no cracks
return(false);
}
public bool Intersects(AxisAlignedBox3d box)
{
return(!((box.Max.x <= Min.x) || (box.Min.x >= Max.x) ||
(box.Max.y <= Min.y) || (box.Min.y >= Max.y) ||
(box.Max.z <= Min.z) || (box.Min.z >= Max.z)));
}
public IntrLine3AxisAlignedBox3(Line3d l, AxisAlignedBox3d b)
{
line = l; box = b;
}
protected virtual DMesh3 BuildMesh_TolerantWeld(STLSolid solid, double weld_tolerance)
{
var builder = new DMesh3Builder();
builder.AppendNewMesh(false, false, false, false);
DVectorArray3f vertices = solid.Vertices;
int N = vertices.Count;
int[] mapV = new int[N];
AxisAlignedBox3d bounds = AxisAlignedBox3d.Empty;
for (int i = 0; i < N; ++i)
{
bounds.Contain(vertices[i]);
}
// [RMS] because we are only searching within tiny radius, there is really no downside to
// using lots of bins here, except memory usage. If we don't, and the mesh has a ton of triangles
// very close together (happens all the time on big meshes!), then this step can start
// to take an *extremely* long time!
int num_bins = 256;
if (N > 100000)
{
num_bins = 512;
}
if (N > 1000000)
{
num_bins = 1024;
}
if (N > 2000000)
{
num_bins = 2048;
}
if (N > 5000000)
{
num_bins = 4096;
}
var uniqueV = new PointHashGrid3d <int>(bounds.MaxDim / (float)num_bins, -1);
var pos = new Vector3f[N];
for (int vi = 0; vi < N; ++vi)
{
Vector3f v = vertices[vi];
var pair = uniqueV.FindNearestInRadius(v, weld_tolerance, (vid) =>
{
return(v.Distance(pos[vid]));
});
if (pair.Key == -1)
{
int vid = builder.AppendVertex(v.x, v.y, v.z);
uniqueV.InsertPoint(vid, v);
mapV[vi] = vid;
pos[vid] = v;
}
else
{
mapV[vi] = pair.Key;
}
}
append_mapped_triangles(solid, builder, mapV);
return(builder.Meshes[0]);
}
// (sequentially) find each triangle that path point lies in, and insert a vertex for
// that point into mesh.
void insert_corners(HashSet <int> MeshVertsOnCurve)
{
PrimalQuery2d query = new PrimalQuery2d(PointF);
if (UseTriSpatial)
{
int count = Mesh.TriangleCount + Curve.VertexCount;
int bins = 32;
if (count < 25)
{
bins = 8;
}
else if (count < 100)
{
bins = 16;
}
AxisAlignedBox3d bounds3 = Mesh.CachedBounds;
AxisAlignedBox2d bounds2 = new AxisAlignedBox2d(bounds3.Min.xy, bounds3.Max.xy);
triSpatial = new TriangleBinsGrid2d(bounds2, bins);
foreach (int tid in Mesh.TriangleIndices())
{
spatial_add_triangle(tid);
}
}
Func <int, Vector2d, bool> inTriangleF = (tid, pos) => {
Index3i tv = Mesh.GetTriangle(tid);
int query_result = query.ToTriangleUnsigned(pos, tv.a, tv.b, tv.c);
return(query_result == -1 || query_result == 0);
};
CurveVertices = new int[Curve.VertexCount];
for (int i = 0; i < Curve.VertexCount; ++i)
{
Vector2d vInsert = Curve[i];
bool inserted = false;
int contain_tid = DMesh3.InvalidID;
if (triSpatial != null)
{
contain_tid = triSpatial.FindContainingTriangle(vInsert, inTriangleF);
}
else
{
foreach (int tid in Mesh.TriangleIndices())
{
Index3i tv = Mesh.GetTriangle(tid);
// [RMS] using unsigned query here because we do not need to care about tri CW/CCW orientation
// (right? otherwise we have to explicitly invert mesh. Nothing else we do depends on tri orientation)
//int query_result = query.ToTriangle(vInsert, tv.a, tv.b, tv.c);
int query_result = query.ToTriangleUnsigned(vInsert, tv.a, tv.b, tv.c);
if (query_result == -1 || query_result == 0)
{
contain_tid = tid;
break;
}
}
}
if (contain_tid != DMesh3.InvalidID)
{
Index3i tv = Mesh.GetTriangle(contain_tid);
Vector3d bary = MathUtil.BarycentricCoords(vInsert, PointF(tv.a), PointF(tv.b), PointF(tv.c));
// SpatialEpsilon is our zero-tolerance, so merge if we are closer than that
bool is_existing_v;
int vid = insert_corner_from_bary(i, contain_tid, bary, 0.01, 100 * SpatialEpsilon, out is_existing_v);
if (vid > 0) // this should be always happening..
{
CurveVertices[i] = vid;
if (is_existing_v)
{
MeshVertsOnCurve.Add(vid);
}
inserted = true;
}
else
{
throw new Exception("MeshInsertUVPolyCurve.insert_corners: failed to insert vertex " + i.ToString());
}
}
if (inserted == false)
{
throw new Exception("MeshInsertUVPolyCurve.insert_corners: curve vertex "
+ i.ToString() + " is not inside or on any mesh triangle!");
}
}
}
public void Contain(AxisAlignedBox3d box)
{
Contain(box.Min);
Contain(box.Max);
}
public IntrRay3AxisAlignedBox3(Ray3d r, AxisAlignedBox3d b)
{
ray = r; box = b;
}
/// <summary>
/// test if ray intersects box.
/// expandExtents allows you to scale box for hit-testing purposes.
/// </summary>
public static bool Intersects(ref Ray3d ray, ref AxisAlignedBox3d box, double expandExtents = 0)
{
Vector3d WdU = Vector3d.Zero;
Vector3d AWdU = Vector3d.Zero;
Vector3d DdU = Vector3d.Zero;
Vector3d ADdU = Vector3d.Zero;
Vector3d AWxDdU = Vector3d.Zero;
double RHS;
Vector3d diff = ray.Origin - box.Center;
Vector3d extent = box.Extents + expandExtents;
WdU[0] = ray.Direction.x; // ray.Direction.Dot(Vector3d.AxisX);
AWdU[0] = Math.Abs(WdU[0]);
DdU[0] = diff.x; // diff.Dot(Vector3d.AxisX);
ADdU[0] = Math.Abs(DdU[0]);
if (ADdU[0] > extent.x && DdU[0] * WdU[0] >= (double)0)
{
return(false);
}
WdU[1] = ray.Direction.y; // ray.Direction.Dot(Vector3d.AxisY);
AWdU[1] = Math.Abs(WdU[1]);
DdU[1] = diff.y; // diff.Dot(Vector3d.AxisY);
ADdU[1] = Math.Abs(DdU[1]);
if (ADdU[1] > extent.y && DdU[1] * WdU[1] >= (double)0)
{
return(false);
}
WdU[2] = ray.Direction.z; // ray.Direction.Dot(Vector3d.AxisZ);
AWdU[2] = Math.Abs(WdU[2]);
DdU[2] = diff.z; // diff.Dot(Vector3d.AxisZ);
ADdU[2] = Math.Abs(DdU[2]);
if (ADdU[2] > extent.z && DdU[2] * WdU[2] >= (double)0)
{
return(false);
}
Vector3d WxD = ray.Direction.Cross(diff);
AWxDdU[0] = Math.Abs(WxD.x); // Math.Abs(WxD.Dot(Vector3d.AxisX));
RHS = extent.y * AWdU[2] + extent.z * AWdU[1];
if (AWxDdU[0] > RHS)
{
return(false);
}
AWxDdU[1] = Math.Abs(WxD.y); // Math.Abs(WxD.Dot(Vector3d.AxisY));
RHS = extent.x * AWdU[2] + extent.z * AWdU[0];
if (AWxDdU[1] > RHS)
{
return(false);
}
AWxDdU[2] = Math.Abs(WxD.z); // Math.Abs(WxD.Dot(Vector3d.AxisZ));
RHS = extent.x * AWdU[1] + extent.y * AWdU[0];
if (AWxDdU[2] > RHS)
{
return(false);
}
return(true);
}
int split_point_set_midpoint(int[] pt_indices, Vector3d[] positions,
int iStart, int iCount, int depth, int minIndexCount,
boxes_set leafs, boxes_set nodes, out AxisAlignedBox3d box)
{
box = AxisAlignedBox3d.Empty;
int iBox = -1;
if (iCount < minIndexCount)
{
// append new points box
iBox = leafs.iBoxCur++;
leafs.box_to_index.insert(leafs.iIndicesCur, iBox);
leafs.index_list.insert(iCount, leafs.iIndicesCur++);
for (int i = 0; i < iCount; ++i)
{
leafs.index_list.insert(pt_indices[iStart + i], leafs.iIndicesCur++);
box.Contain(points.GetVertex(pt_indices[iStart + i]));
}
leafs.box_centers.insert(box.Center, iBox);
leafs.box_extents.insert(box.Extents, iBox);
return(-(iBox + 1));
}
//compute interval along an axis and find midpoint
int axis = depth % 3;
Interval1d interval = Interval1d.Empty;
for (int i = 0; i < iCount; ++i)
{
interval.Contain(positions[iStart + i][axis]);
}
double midpoint = interval.Center;
int n0, n1;
if (Math.Abs(interval.a - interval.b) > MathUtil.ZeroTolerance)
{
// we have to re-sort the centers & indices lists so that centers < midpoint
// are first, so that we can recurse on the two subsets. We walk in from each side,
// until we find two out-of-order locations, then we swap them.
int l = 0;
int r = iCount - 1;
while (l < r)
{
// [RMS] is <= right here? if v.axis == midpoint, then this loop
// can get stuck unless one of these has an equality test. But
// I did not think enough about if this is the right thing to do...
while (positions[iStart + l][axis] <= midpoint)
{
l++;
}
while (positions[iStart + r][axis] > midpoint)
{
r--;
}
if (l >= r)
{
break; //done!
}
//swap
Vector3d tmpc = positions[iStart + l]; positions[iStart + l] = positions[iStart + r]; positions[iStart + r] = tmpc;
int tmpt = pt_indices[iStart + l]; pt_indices[iStart + l] = pt_indices[iStart + r]; pt_indices[iStart + r] = tmpt;
}
n0 = l;
n1 = iCount - n0;
Debug.Assert(n0 >= 1 && n1 >= 1);
}
else
{
// interval is near-empty, so no point trying to do sorting, just split half and half
n0 = iCount / 2;
n1 = iCount - n0;
}
// create child boxes
AxisAlignedBox3d box1;
int child0 = split_point_set_midpoint(pt_indices, positions, iStart, n0, depth + 1, minIndexCount, leafs, nodes, out box);
int child1 = split_point_set_midpoint(pt_indices, positions, iStart + n0, n1, depth + 1, minIndexCount, leafs, nodes, out box1);
box.Contain(box1);
// append new box
iBox = nodes.iBoxCur++;
nodes.box_to_index.insert(nodes.iIndicesCur, iBox);
nodes.index_list.insert(child0, nodes.iIndicesCur++);
nodes.index_list.insert(child1, nodes.iIndicesCur++);
nodes.box_centers.insert(box.Center, iBox);
nodes.box_extents.insert(box.Extents, iBox);
return(iBox);
}
public virtual void Generate()
{
AxisAlignedBox3d graphBox = Graph.CachedBounds;
graphBox.Expand(2 * PostRadius);
double cellSize = (SamplerCellSizeHint == 0) ? (PostRadius / 5) : SamplerCellSizeHint;
ImplicitFieldSampler3d sampler = new ImplicitFieldSampler3d(graphBox, cellSize);
ActualCellSize = cellSize;
// sample segments into graph
ImplicitLine3d line = new ImplicitLine3d()
{
Radius = PostRadius
};
foreach (int eid in Graph.EdgeIndices())
{
Index2i ev = Graph.GetEdgeV(eid);
Vector3d v0 = Graph.GetVertex(ev.a);
Vector3d v1 = Graph.GetVertex(ev.b);
double r = PostRadius;
int upper_vid = (v0.y > v1.y) ? ev.a : ev.b;
if (TipVertices.Contains(upper_vid))
{
r = TipRadius;
}
line.Segment = new Segment3d(v0, v1);
line.Radius = r;
sampler.Sample(line, line.Radius / 2);
}
foreach (int vid in GroundVertices)
{
Vector3d v = Graph.GetVertex(vid);
sampler.Sample(new ImplicitSphere3d()
{
Origin = v - (PostRadius / 2) * Vector3d.AxisY, Radius = GroundRadius
});
}
ImplicitHalfSpace3d cutPlane = new ImplicitHalfSpace3d()
{
Origin = Vector3d.Zero, Normal = Vector3d.AxisY
};
ImplicitDifference3d cut = new ImplicitDifference3d()
{
A = sampler.ToImplicit(), B = cutPlane
};
MarchingCubes mc = new MarchingCubes()
{
Implicit = cut, Bounds = graphBox, CubeSize = PostRadius / 3
};
mc.Bounds.Min.y = -2 * mc.CubeSize;
mc.Bounds.Min.x -= 2 * mc.CubeSize; mc.Bounds.Min.z -= 2 * mc.CubeSize;
mc.Bounds.Max.x += 2 * mc.CubeSize; mc.Bounds.Max.z += 2 * mc.CubeSize;
mc.CancelF = this.Cancelled;
mc.Generate();
ResultMesh = mc.Mesh;
}
// (sequentially) find each triangle that path point lies in, and insert a vertex for
// that point into mesh.
void insert_corners(HashSet <int> MeshVertsOnCurve)
{
PrimalQuery2d query = new PrimalQuery2d(PointF);
if (UseTriSpatial)
{
int count = Mesh.TriangleCount + Curve.VertexCount;
int bins = 32;
if (count < 25)
{
bins = 8;
}
else if (count < 100)
{
bins = 16;
}
AxisAlignedBox3d bounds3 = Mesh.CachedBounds;
AxisAlignedBox2d bounds2 = new AxisAlignedBox2d(bounds3.Min.xy, bounds3.Max.xy);
triSpatial = new TriangleBinsGrid2d(bounds2, bins);
foreach (int tid in Mesh.TriangleIndices())
{
spatial_add_triangle(tid);
}
}
Func <int, Vector2d, bool> inTriangleF = (tid, pos) => {
Index3i tv = Mesh.GetTriangle(tid);
int query_result = query.ToTriangleUnsigned(pos, tv.a, tv.b, tv.c);
return(query_result == -1 || query_result == 0);
};
CurveVertices = new int[Curve.VertexCount];
for (int i = 0; i < Curve.VertexCount; ++i)
{
Vector2d vInsert = Curve[i];
bool inserted = false;
// find the triangle that contains this curve point
int contain_tid = DMesh3.InvalidID;
if (triSpatial != null)
{
contain_tid = triSpatial.FindContainingTriangle(vInsert, inTriangleF);
}
else
{
foreach (int tid in Mesh.TriangleIndices())
{
Index3i tv = Mesh.GetTriangle(tid);
// [RMS] using unsigned query here because we do not need to care about tri CW/CCW orientation
// (right? otherwise we have to explicitly invert mesh. Nothing else we do depends on tri orientation)
//int query_result = query.ToTriangle(vInsert, tv.a, tv.b, tv.c);
int query_result = query.ToTriangleUnsigned(vInsert, tv.a, tv.b, tv.c);
if (query_result == -1 || query_result == 0)
{
contain_tid = tid;
break;
}
}
}
// if we found one, insert the point via face-poke or edge-split,
// unless it is exactly at existing vertex, in which case we can re-use it
if (contain_tid != DMesh3.InvalidID)
{
Index3i tv = Mesh.GetTriangle(contain_tid);
Vector3d bary = MathUtil.BarycentricCoords(vInsert, PointF(tv.a), PointF(tv.b), PointF(tv.c));
// SpatialEpsilon is our zero-tolerance, so merge if we are closer than that
bool is_existing_v;
int vid = insert_corner_from_bary(i, contain_tid, bary, 0.01, 100 * SpatialEpsilon, out is_existing_v);
if (vid > 0)
{
CurveVertices[i] = vid;
if (is_existing_v)
{
MeshVertsOnCurve.Add(vid);
}
inserted = true;
}
}
// if we did not find containing triangle,
// try matching with any existing vertices.
// This can happen if curve point is right on mesh border...
if (inserted == false)
{
foreach (int vid in Mesh.VertexIndices())
{
Vector2d v = PointF(vid);
if (vInsert.Distance(v) < SpatialEpsilon)
{
CurveVertices[i] = vid;
MeshVertsOnCurve.Add(vid);
inserted = true;
}
}
}
// TODO: also case where curve point is right on mesh border edge,
// and so it ends up being outside all triangles?
if (inserted == false)
{
throw new Exception("MeshInsertUVPolyCurve.insert_corners: curve vertex "
+ i.ToString() + " is not inside or on any mesh triangle!");
}
}
}
