Exemplo n.º 1
0
 public Line(sPoint start, sPoint end)
 {
     this.Start = start;
     this.End = end;
     this.Length = Math.Sqrt(((this.End.X - this.Start.X) * (this.End.X - this.Start.X)) +
                             ((this.End.Y - this.Start.Y) * (this.End.Y - this.Start.Y)));
 }
Exemplo n.º 2
0
        public sBox(int size, sPoint center)
        {
            this.Center = center;
            this.size = size;

            Line north = new Line(new sPoint(center.X - size, center.Y - size),      // NW Corner
                                  new sPoint(center.X + size, center.Y - size));     // NE Corner
            Line west = new Line(new sPoint(center.X - size, center.Y - size),       // NW Corner
                                 new sPoint(center.X - size, center.Y + size));      // SW Corner
            Line south = new Line(new sPoint(center.X - size, center.Y + size),      // SW Corner
                                  new sPoint(center.X + size, center.Y + size));     // SE Corner
            Line east = new Line(new sPoint(center.X + size, center.Y - size),       // NE Corner
                                 new sPoint(center.X + size, center.Y + size));      // SE Corner

            this.Side = new Line[8];        // Directions enum ranges from 0-7
            this.Side[(int)sDirections.North] = north;
            this.Side[(int)sDirections.West] = west;
            this.Side[(int)sDirections.South] = south;
            this.Side[(int)sDirections.East] = east;
        }
Exemplo n.º 3
0
        public sDirections GetDirectionForNext(sVect curVec, sPoint curLoc)
        {
            sDirections result = sDirections.Null;

            if (curVec.Length < (this.size * 3) && curVec.Length > 0)
            {
                int offset = Convert.ToInt32(Math.Floor((this.size * 3) / curVec.Length));

                curVec.MultiplyBy(offset); // make longer to ensure it will intersect side
            }

            Line north = this.Side[(int)sDirections.North];
            Line west = this.Side[(int)sDirections.West];
            Line south = this.Side[(int)sDirections.South];
            Line east = this.Side[(int)sDirections.East];

            Line test = curVec.toLine(curLoc);

            if (this.DoLinesIntersect(north, test))
            {
                sPoint intersect = this.GetLinesIntersect(north, test);

                if (intersect == north.Start)
                {
                    result = sDirections.NorthWest;
                }
                else if (intersect == north.End)
                {
                    result = sDirections.NorthEast;
                }
                else
                {
                    result = sDirections.North;
                }
            }
            else if (this.DoLinesIntersect(west, test))
            {
                sPoint intersect = this.GetLinesIntersect(west, test);

                if (intersect == west.Start)
                {
                    result = sDirections.NorthWest;
                }
                else if (intersect == west.End)
                {
                    result = sDirections.SouthWest;
                }
                else
                {
                    result = sDirections.West;
                }
            }
            else if (this.DoLinesIntersect(south, test))
            {
                sPoint intersect = this.GetLinesIntersect(west, test);

                if (intersect == south.Start)
                {
                    result = sDirections.SouthWest;
                }
                else if (intersect == south.End)
                {
                    result = sDirections.SouthEast;
                }
                else
                {
                    result = sDirections.South;
                }
            }
            else if (this.DoLinesIntersect(east, test))
            {
                sPoint intersect = this.GetLinesIntersect(west, test);

                if (intersect == east.Start)
                {
                    result = sDirections.NorthEast;
                }
                else if (intersect == east.End)
                {
                    result = sDirections.SouthEast;
                }
                else
                {
                    result = sDirections.East;
                }
            }

            return result;
        }
Exemplo n.º 4
0
        private sPoint GetLinesIntersect(Line line1, Line line2)
        {
            sPoint results = new sPoint(-1, -1);

            double ua = (line2.End.X - line2.Start.X) * (line1.Start.Y - line2.Start.Y) -
                       (line2.End.Y - line2.Start.Y) * (line1.Start.X - line2.Start.X);
            double ub = (line1.End.X - line1.Start.X) * (line1.Start.Y - line2.Start.Y) -
                       (line1.End.Y - line1.Start.Y) * (line1.Start.X - line2.Start.X);
            double denominator = (line2.End.Y - line2.Start.Y) * (line1.End.X - line1.Start.X) -
                                (line2.End.X - line2.Start.X) * (line1.End.Y - line1.Start.Y);

            if (Math.Abs(denominator) <= 0.00001f)
            {
                if (Math.Abs(ua) <= 0.00001f && Math.Abs(ub) <= 0.00001f)
                {
                    results.X = (line1.Start.X + line1.End.X) / 2;
                    results.Y = (line1.Start.Y + line1.End.Y) / 2;
                }
            }
            else
            {
                ua /= denominator;
                ub /= denominator;

                if (ua >= 0 && ua <= 1 && ub >= 0 && ub <= 1)
                {
                    results.X = line1.Start.X + ua * (line1.End.X - line1.Start.X);
                    results.Y = line1.Start.Y + ua * (line1.End.Y - line1.Start.Y);
                }
            }

            return results;
        }
Exemplo n.º 5
0
        public bool isPointInBox(sPoint p)
        {
            bool results = true;

            if (p != this.Center)
            {
                Line test = new Line(this.Center, p);

                if (test.Length >= this.size)
                {
                    //for (int i = 0; i < 4; i++)
                    //{
                    //    if (this.DoLinesIntersect(test, this.Side[i]))
                    //    {
                    //        results = false;
                    //    }
                    //}

                    results = false;
                }
            }
            else
            {
                results = true;
            }

            return results;
        }
Exemplo n.º 6
0
 public sVect(sPoint start, sPoint end)
 {
     this.X = end.X - start.X;
     this.Y = end.Y - start.Y;
     this.Init();
 }
Exemplo n.º 7
0
        private sDirections FindDirection(sPoint p)
        {
            sDirections result = sDirections.Null;

            if (p.X == 0)
            {
                // X is zero, moving either North or South
                if (p.Y == 0)
                {
                    // Y is zero, not moving at all!
                    result = sDirections.Null;
                }
                else if (p.Y > 0)
                {
                    // Y is positive, moving to the South
                    result = sDirections.South;
                }
                else
                {
                    // Y is negative, moving to the North
                    result = sDirections.North;
                }

            }
            else if (p.X > 0)
            {
                // X is positive, moving to the East
                if (p.Y == 0)
                {
                    // Y is zero, moving East
                    result = sDirections.East;
                }
                else if (p.Y > 0)
                {
                    // Y is positive, moving to the SouthEast
                    result = sDirections.SouthEast;
                }
                else
                {
                    // Y is negative, moving to the NorthEast
                    result = sDirections.NorthEast;
                }
            }
            else
            {
                // X is negative, moving to the West
                if (p.Y == 0)
                {
                    // Y is zero, moving West
                    result = sDirections.West;
                }
                else if (p.Y > 0)
                {
                    // Y is positive, moving to the SouthWest
                    result = sDirections.SouthWest;
                }
                else
                {
                    // Y is negative, moving to the NorthWest
                    result = sDirections.NorthWest;
                }
            }

            return result;
        }
Exemplo n.º 8
0
 public Line toLine(sPoint start)
 {
     sPoint end = new sPoint(start.X + this.X, start.Y + this.Y);
     return new Line(start, end);
 }