|
public WithMaxWidthOffsetBy ( int maxWidth, int dx, int dy ) : |
||
| maxWidth | int | |
| dx | int | |
| dy | int | |
| return | ||
/// <summary>
/// This routine and its overrides are used to make sure that the part of the root box between
/// yTop and yBottom (measured from the top of the root) can be painted successfully. To facilitate
/// the process of replacing a lazy box with real boxes, it is passed the previous box in its
/// container (or null if there is none) and returns the next box which the container should
/// check is prepared to paint. By default this is simply the next box, but if a lazy box expands
/// (part of) itself, it should answer the replacement box.
/// Most box classes are always prepared to paint and do nothing. Lazy boxes convert all or part of
/// themselves to real boxes if they intersect the specified vertical range (relative to the root as
/// a whole). Boxes (currently DivBoxes only) which might contain lazy boxes pass the message on
/// to their children, making the appropriate adjustment to the layout transform, just as when
/// asking their children to Layout.
/// </summary>
internal override Box PrepareToPaint(LayoutInfo transform, Box myPrevBox, int dysTop, int dysBottom)
{
var childMaxWidth = transform.MaxWidth - GapLeading(transform) - GapTrailing(transform);
var childTransform = transform.WithMaxWidthOffsetBy(childMaxWidth, Left, Top);
Box prevBox = null;
for (Box box = FirstBox; box != null;)
{
if (transform.YOffset + box.Top > dysBottom)
{
// nothing further down in this can be visible. Possibly we should return null,
// since presumably nothing further down in the container is visible, either.
// However, it feels more robust to answer in the usual way and let the container decide
// for itself.
return(Next);
}
if (transform.YOffset + box.Bottom < dysTop)
{
box = box.Next; // this box is not visible, but a later one might be
}
else
{
box = box.PrepareToPaint(childTransform, prevBox, dysTop, dysBottom);
}
}
return(Next);
}
private Box ChildSetup(Box box, LayoutInfo transform, int maxBoxWidth, int left, int top)
{
var childTransform = transform.WithMaxWidthOffsetBy(maxBoxWidth, Left, Top); // todo: test
box.Layout(childTransform);
box.Left = left;
box.Top = top;
return box;
}
private Box ChildSetup(Box box, LayoutInfo transform, int maxBoxWidth, int left, int top)
{
var childTransform = transform.WithMaxWidthOffsetBy(maxBoxWidth, Left, Top); // todo: test
box.Layout(childTransform);
box.Left = left;
box.Top = top;
return(box);
}
public override void Layout(LayoutInfo transform)
{
var left = GapLeading(transform);
var top = GapTop(transform);
var rightGap = GapTrailing(transform);
var maxHeight = 0;
var maxWidth = transform.MaxWidth;
Box prevBox = null;
int[] columnWidths = m_ColumnWidths.ColumnWidths(NumBoxes,
new LayoutInfo(transform.XOffset, transform.YOffset, transform.DpiX,
transform.DpiY, transform.MaxWidth - left - rightGap,
transform.VwGraphics, transform.RendererFactory));
int i = 0;
if (m_WrapRow)
{
var leftGap = GapLeading(transform);
for (var box = FirstBox; box != null; box = box.Next)
{
box = ChildSetup(box, transform, columnWidths[i], leftGap, top);
if (leftGap + Math.Min(box.Width, columnWidths[i]) >= maxWidth && prevBox != null)
{
top = maxHeight + GapTop(transform);
leftGap = GapLeading(transform);
box = ChildSetup(box, transform, columnWidths[i], leftGap, top);
maxHeight += box.Height;
}
else
{
box = ChildSetup(box, transform, columnWidths[i], leftGap, top);
maxHeight = Math.Max(maxHeight, box.Height + box.Top - GapTop(transform));
}
leftGap += box.Width;
left = Math.Max(left, leftGap);
prevBox = box;
i++;
}
}
else
{
for (var box = FirstBox; box != null; box = box.Next)
{
var childTransform = transform.WithMaxWidthOffsetBy(columnWidths[i], Left, Top); // todo: test
i++;
box.Layout(childTransform);
box.Left = left;
box.Top = top;
left += box.Width;
maxHeight = Math.Max(maxHeight, box.Height);
}
}
Height = maxHeight + GapTop(transform) + GapBottom(transform);
Width = left + rightGap;
}
public override void Layout(LayoutInfo transform)
{
var left = GapLeading(transform);
var top = GapTop(transform);
var rightGap = GapTrailing(transform);
var maxHeight = 0;
var maxWidth = transform.MaxWidth;
Box prevBox = null;
int[] columnWidths = m_ColumnWidths.ColumnWidths(NumBoxes,
new LayoutInfo(transform.XOffset, transform.YOffset, transform.DpiX,
transform.DpiY, transform.MaxWidth - left - rightGap,
transform.VwGraphics, transform.RendererFactory));
int i = 0;
if (m_WrapRow)
{
var leftGap = GapLeading(transform);
for (var box = FirstBox; box != null; box = box.Next)
{
box = ChildSetup(box, transform, columnWidths[i], leftGap, top);
if (leftGap + Math.Min(box.Width, columnWidths[i]) >= maxWidth && prevBox != null)
{
top = maxHeight + GapTop(transform);
leftGap = GapLeading(transform);
box = ChildSetup(box, transform, columnWidths[i], leftGap, top);
maxHeight += box.Height;
}
else
{
box = ChildSetup(box, transform, columnWidths[i], leftGap, top);
maxHeight = Math.Max(maxHeight, box.Height + box.Top - GapTop(transform));
}
leftGap += box.Width;
left = Math.Max(left, leftGap);
prevBox = box;
i++;
}
}
else
{
for (var box = FirstBox; box != null; box = box.Next)
{
var childTransform = transform.WithMaxWidthOffsetBy(columnWidths[i], Left, Top); // todo: test
i++;
box.Layout(childTransform);
box.Left = left;
box.Top = top;
left += box.Width;
maxHeight = Math.Max(maxHeight, box.Height);
}
}
Height = maxHeight + GapTop(transform) + GapBottom(transform);
Width = left + rightGap;
}
public override void Layout(LayoutInfo transform)
{
var left = GapLeading(transform);
var top = GapTop(transform);
var rightGap = GapTrailing(transform);
var maxWidth = transform.MaxWidth;
Box prevBox = null;
var childTransform = transform.WithMaxWidthOffsetBy(maxWidth - left - rightGap, Left, Top);
for (var box = FirstBox; box != null; box = box.Next)
{
box.Layout(childTransform);
box.Left = left;
top = AdjustTopForMargins(top, transform, prevBox, box);
box.Top = top;
top += box.Height;
prevBox = box;
}
Height = top + GapBottom(transform);
Width = maxWidth;
}
public override void Layout(LayoutInfo transform)
{
var left = GapLeading(transform);
var top = GapTop(transform);
var rightGap = GapTrailing(transform);
var maxWidth = transform.MaxWidth;
Box prevBox = null;
var childTransform = transform.WithMaxWidthOffsetBy(maxWidth - left - rightGap, Left, Top);
for (var box = FirstBox; box != null; box = box.Next)
{
box.Layout(childTransform);
box.Left = left;
top = AdjustTopForMargins(top, transform, prevBox, box);
box.Top = top;
top += box.Height;
prevBox = box;
}
Height = top + GapBottom(transform);
Width = maxWidth;
}
/// <summary>
/// Keep in sync with PileBox.Layout.
/// It's important to optimize relayout of DivBox, because they can be very large, and often the height
/// of a child does not actually change. Also, this is currently the implementation inherited by root box,
/// and the boolean returned from Relayout on the root is ignored; this routine must accomplish all needed
/// layout itself.
/// We override here rather than on PileBox because non-div piles are typically small and laying out the whole
/// thing is not too expensive, while it is harder to predict how changes (e.g., in width) might affect parents.
/// The parents of Divs can only be divs.
/// </summary>
internal override bool Relayout(LayoutInfo transform, Dictionary <Box, Rectangle> fixupMap, LayoutCallbacks lcb)
{
if (Height == 0)
{
// brand new box, needs full layout but not invalidate, since it never has been visible.
Layout(transform);
return(false);
}
Rectangle oldLocation;
if (!fixupMap.TryGetValue(this, out oldLocation))
{
return(false); // unchanged, this box does not need to be re-laid out or invalidated.
}
var left = GapLeading(transform);
var top = GapTop(transform);
var rightGap = GapTrailing(transform);
var maxWidth = 0;
int oldHeight = Height;
int oldWidth = Width;
var topInvalidate = int.MaxValue;
int prevBoxOldBottom = 0;
var childTransform = transform.WithMaxWidthOffsetBy(transform.MaxWidth - left - rightGap, Left, Top);
Box prevBox = null;
for (var box = FirstBox; box != null; box = box.Next)
{
int oldBottom = box.Bottom; // before it is moved or resized (but may be spuriously 0 for new box)
bool needsInvalidate = box.Relayout(childTransform, fixupMap, lcb);
top = AdjustTopForMargins(top, transform, prevBox, box);
// Now figure whether we need to start invalidating based on moved boxes.
// If this box moved, we need to invalidate from its top down...or even from its old
// top, since the preceding box may have shrunk, without this one changing internally.
if (box.Top != top) // test this before we add height to top.
{
topInvalidate = Math.Min(topInvalidate, Math.Min(top, prevBoxOldBottom));
box.Top = top;
}
box.Left = left;
top += box.Height;
maxWidth = Math.Max(maxWidth, box.Width);
// assumes our top will not move; if it does, everything gets invalidated, so this is only wasted.
if (needsInvalidate)
{
lcb.InvalidateInRoot(box.InvalidateRect);
}
// The Math.Max prevents us adjusting it downwards for a new box, which originally had zero top
// and height.
prevBoxOldBottom = Math.Max(prevBoxOldBottom, oldBottom);
prevBox = box;
}
Height = top + GapBottom(transform);
Width = maxWidth + left + rightGap;
if (oldWidth != Width)
{
// The new invalidate rect may not be strictly right, but in the unlikley event that this
// box moves, its parent will invalidate its new location again.
lcb.InvalidateInRoot(oldLocation);
lcb.InvalidateInRoot(InvalidateRect);
return(false);
}
// Even if none of the tops moved, if our height changed, we need to invalidate the difference area.
if (Height != oldHeight)
{
topInvalidate = Math.Min(topInvalidate, Math.Min(Height, oldHeight));
}
if (topInvalidate != int.MaxValue)
{
var bottomInvalidate = Math.Max(Height, oldHeight);
// if our top moves, the whole box will get invalidated. Assuming it doesn't,
// oldLocation needs it, adjusted for the bit that didn't move at the top, and possibly
// to account for getting bigger at the bottom.
var invalidate = new Rectangle(oldLocation.Left, oldLocation.Top + topInvalidate, oldLocation.Width,
bottomInvalidate - topInvalidate + Box.InvalidateMargin * 2);
lcb.InvalidateInRoot(invalidate);
}
return(false);
}
/// <summary>
/// Keep in sync with PileBox.Layout.
/// It's important to optimize relayout of DivBox, because they can be very large, and often the height
/// of a child does not actually change. Also, this is currently the implementation inherited by root box,
/// and the boolean returned from Relayout on the root is ignored; this routine must accomplish all needed
/// layout itself.
/// We override here rather than on PileBox because non-div piles are typically small and laying out the whole
/// thing is not too expensive, while it is harder to predict how changes (e.g., in width) might affect parents.
/// The parents of Divs can only be divs.
/// </summary>
internal override bool Relayout(LayoutInfo transform, Dictionary<Box, Rectangle> fixupMap, LayoutCallbacks lcb)
{
if (Height == 0)
{
// brand new box, needs full layout but not invalidate, since it never has been visible.
Layout(transform);
return false;
}
Rectangle oldLocation;
if (!fixupMap.TryGetValue(this, out oldLocation))
return false; // unchanged, this box does not need to be re-laid out or invalidated.
var left = GapLeading(transform);
var top = GapTop(transform);
var rightGap = GapTrailing(transform);
var maxWidth = 0;
int oldHeight = Height;
int oldWidth = Width;
var topInvalidate = int.MaxValue;
int prevBoxOldBottom = 0;
var childTransform = transform.WithMaxWidthOffsetBy(transform.MaxWidth - left - rightGap, Left, Top);
Box prevBox = null;
for (var box = FirstBox; box != null; box = box.Next)
{
int oldBottom = box.Bottom; // before it is moved or resized (but may be spuriously 0 for new box)
bool needsInvalidate = box.Relayout(childTransform, fixupMap, lcb);
top = AdjustTopForMargins(top, transform, prevBox, box);
// Now figure whether we need to start invalidating based on moved boxes.
// If this box moved, we need to invalidate from its top down...or even from its old
// top, since the preceding box may have shrunk, without this one changing internally.
if (box.Top != top) // test this before we add height to top.
{
topInvalidate = Math.Min(topInvalidate, Math.Min(top, prevBoxOldBottom));
box.Top = top;
}
box.Left = left;
top += box.Height;
maxWidth = Math.Max(maxWidth, box.Width);
// assumes our top will not move; if it does, everything gets invalidated, so this is only wasted.
if (needsInvalidate)
lcb.InvalidateInRoot(box.InvalidateRect);
// The Math.Max prevents us adjusting it downwards for a new box, which originally had zero top
// and height.
prevBoxOldBottom = Math.Max(prevBoxOldBottom, oldBottom);
prevBox = box;
}
Height = top + GapBottom(transform);
Width = maxWidth + left + rightGap;
if (oldWidth != Width)
{
// The new invalidate rect may not be strictly right, but in the unlikley event that this
// box moves, its parent will invalidate its new location again.
lcb.InvalidateInRoot(oldLocation);
lcb.InvalidateInRoot(InvalidateRect);
return false;
}
// Even if none of the tops moved, if our height changed, we need to invalidate the difference area.
if (Height != oldHeight)
topInvalidate = Math.Min(topInvalidate, Math.Min(Height, oldHeight));
if (topInvalidate != int.MaxValue)
{
var bottomInvalidate = Math.Max(Height, oldHeight);
// if our top moves, the whole box will get invalidated. Assuming it doesn't,
// oldLocation needs it, adjusted for the bit that didn't move at the top, and possibly
// to account for getting bigger at the bottom.
var invalidate = new Rectangle(oldLocation.Left, oldLocation.Top + topInvalidate, oldLocation.Width,
bottomInvalidate - topInvalidate + Box.InvalidateMargin*2);
lcb.InvalidateInRoot(invalidate);
}
return false;
}
/// <summary>
/// This routine and its overrides are used to make sure that the part of the root box between
/// yTop and yBottom (measured from the top of the root) can be painted successfully. To facilitate
/// the process of replacing a lazy box with real boxes, it is passed the previous box in its
/// container (or null if there is none) and returns the next box which the container should
/// check is prepared to paint. By default this is simply the next box, but if a lazy box expands
/// (part of) itself, it should answer the replacement box.
/// Most box classes are always prepared to paint and do nothing. Lazy boxes convert all or part of
/// themselves to real boxes if they intersect the specified vertical range (relative to the root as
/// a whole). Boxes (currently DivBoxes only) which might contain lazy boxes pass the message on
/// to their children, making the appropriate adjustment to the layout transform, just as when
/// asking their children to Layout.
/// </summary>
internal override Box PrepareToPaint(LayoutInfo transform, Box myPrevBox, int dysTop, int dysBottom)
{
var childMaxWidth = transform.MaxWidth - GapLeading(transform) - GapTrailing(transform);
var childTransform = transform.WithMaxWidthOffsetBy(childMaxWidth, Left, Top);
Box prevBox = null;
for (Box box = FirstBox; box != null; )
{
if (transform.YOffset + box.Top > dysBottom)
{
// nothing further down in this can be visible. Possibly we should return null,
// since presumably nothing further down in the container is visible, either.
// However, it feels more robust to answer in the usual way and let the container decide
// for itself.
return Next;
}
if (transform.YOffset + box.Bottom < dysTop)
box = box.Next; // this box is not visible, but a later one might be
else
box = box.PrepareToPaint(childTransform, prevBox, dysTop, dysBottom);
}
return Next;
}
