public static Rhino.Commands.Result AddTorus(Rhino.RhinoDoc doc)
{
const double major_radius = 4.0;
const double minor_radius = 2.0;
Rhino.Geometry.Plane plane = Rhino.Geometry.Plane.WorldXY;
Rhino.Geometry.Torus torus = new Rhino.Geometry.Torus(plane, major_radius, minor_radius);
Rhino.Geometry.RevSurface revsrf = torus.ToRevSurface();
if (doc.Objects.AddSurface(revsrf) != Guid.Empty)
{
doc.Views.Redraw();
return(Rhino.Commands.Result.Success);
}
return(Rhino.Commands.Result.Failure);
}
public RevSurface ToRevSurface()
{
return(RevSurface.CreateFromSphere(this));
}
internal static GeometryBase CreateGeometryHelper(IntPtr pGeometry, object parent, int subobjectIndex)
{
if (IntPtr.Zero == pGeometry)
{
return(null);
}
var type = UnsafeNativeMethods.ON_Geometry_GetGeometryType(pGeometry);
if (type < 0)
{
return(null);
}
GeometryBase rc = null;
switch (type)
{
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Curve: //1
rc = new Curve(pGeometry, parent, subobjectIndex);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_NurbsCurve: //2
rc = new NurbsCurve(pGeometry, parent, subobjectIndex);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_PolyCurve: // 3
rc = new PolyCurve(pGeometry, parent, subobjectIndex);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_PolylineCurve: //4
rc = new PolylineCurve(pGeometry, parent, subobjectIndex);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_ArcCurve: //5
rc = new ArcCurve(pGeometry, parent, subobjectIndex);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_LineCurve: //6
rc = new LineCurve(pGeometry, parent, subobjectIndex);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Mesh: //7
rc = new Mesh(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Point: //8
rc = new Point(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_TextDot: //9
rc = new TextDot(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Surface: //10
rc = new Surface(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Brep: //11
rc = new Brep(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_NurbsSurface: //12
rc = new NurbsSurface(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_RevSurface: //13
rc = new RevSurface(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_PlaneSurface: //14
rc = new PlaneSurface(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_ClippingPlaneSurface: //15
rc = new ClippingPlaneSurface(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Hatch: // 17
rc = new Hatch(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_SumSurface: //19
rc = new SumSurface(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_BrepFace: //20
{
int faceindex = -1;
IntPtr ptr_brep = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref faceindex);
if (ptr_brep != IntPtr.Zero && faceindex >= 0)
{
Brep b = new Brep(ptr_brep, parent);
rc = b.Faces[faceindex];
}
}
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_BrepEdge: // 21
{
int edgeindex = -1;
IntPtr ptr_brep = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref edgeindex);
if (ptr_brep != IntPtr.Zero && edgeindex >= 0)
{
Brep b = new Brep(ptr_brep, parent);
rc = b.Edges[edgeindex];
}
}
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_InstanceReference: // 23
rc = new InstanceReferenceGeometry(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Extrusion: //24
rc = new Extrusion(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_PointCloud: // 26
rc = new PointCloud(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_DetailView: // 27
rc = new DetailView(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Light: //32
rc = new Light(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_PointGrid: //33
rc = new Point3dGrid(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_MorphControl: //34
rc = new MorphControl(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_BrepLoop: //35
{
int loopindex = -1;
IntPtr ptr_brep = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref loopindex);
if (ptr_brep != IntPtr.Zero && loopindex >= 0)
{
Brep b = new Brep(ptr_brep, parent);
rc = b.Loops[loopindex];
}
}
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_BrepTrim: // 36
{
int trimindex = -1;
IntPtr ptr_brep = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref trimindex);
if (ptr_brep != IntPtr.Zero && trimindex >= 0)
{
Brep b = new Brep(ptr_brep, parent);
rc = b.Trims[trimindex];
}
}
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Leader: // 38
rc = new Leader(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_SubD: // 39
rc = new SubD(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_DimLinear: //40
rc = new LinearDimension(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_DimAngular: //41
rc = new AngularDimension(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_DimRadial: //42
rc = new RadialDimension(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_DimOrdinate: //43
rc = new OrdinateDimension(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Centermark: //44
rc = new Centermark(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Text: //45
rc = new TextEntity(pGeometry, parent);
break;
default:
rc = new UnknownGeometry(pGeometry, parent, subobjectIndex);
break;
}
return(rc);
}
public RevSurface ToRevSurface()
{
return(RevSurface.CreateFromCylinder(this));
}
internal static GeometryBase CreateGeometryHelper(IntPtr pGeometry, object parent, int subobject_index)
{
if (IntPtr.Zero == pGeometry)
return null;
int type = UnsafeNativeMethods.ON_Geometry_GetGeometryType(pGeometry);
if (type < 0)
return null;
GeometryBase rc = null;
switch (type)
{
case idxON_Curve: //1
rc = new Curve(pGeometry, parent, subobject_index);
break;
case idxON_NurbsCurve: //2
rc = new NurbsCurve(pGeometry, parent, subobject_index);
break;
case idxON_PolyCurve: // 3
rc = new PolyCurve(pGeometry, parent, subobject_index);
break;
case idxON_PolylineCurve: //4
rc = new PolylineCurve(pGeometry, parent, subobject_index);
break;
case idxON_ArcCurve: //5
rc = new ArcCurve(pGeometry, parent, subobject_index);
break;
case idxON_LineCurve: //6
rc = new LineCurve(pGeometry, parent, subobject_index);
break;
case idxON_Mesh: //7
rc = new Mesh(pGeometry, parent);
break;
case idxON_Point: //8
rc = new Point(pGeometry, parent);
break;
case idxON_TextDot: //9
rc = new TextDot(pGeometry, parent);
break;
case idxON_Surface: //10
rc = new Surface(pGeometry, parent);
break;
case idxON_Brep: //11
rc = new Brep(pGeometry, parent);
break;
case idxON_NurbsSurface: //12
rc = new NurbsSurface(pGeometry, parent);
break;
case idxON_RevSurface: //13
rc = new RevSurface(pGeometry, parent);
break;
case idxON_PlaneSurface: //14
rc = new PlaneSurface(pGeometry, parent);
break;
case idxON_ClippingPlaneSurface: //15
rc = new ClippingPlaneSurface(pGeometry, parent);
break;
case idxON_Annotation2: // 16
rc = new AnnotationBase(pGeometry, parent);
break;
case idxON_Hatch: // 17
rc = new Hatch(pGeometry, parent);
break;
case idxON_TextEntity2: //18
rc = new TextEntity(pGeometry, parent);
break;
case idxON_SumSurface: //19
rc = new SumSurface(pGeometry, parent);
break;
case idxON_BrepFace: //20
{
int faceindex = -1;
IntPtr pBrep = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref faceindex);
if (pBrep != IntPtr.Zero && faceindex >= 0)
{
Brep b = new Brep(pBrep, parent);
rc = b.Faces[faceindex];
}
}
break;
case idxON_BrepEdge: // 21
{
int edgeindex = -1;
IntPtr pBrep = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref edgeindex);
if (pBrep != IntPtr.Zero && edgeindex >= 0)
{
Brep b = new Brep(pBrep, parent);
rc = b.Edges[edgeindex];
}
}
break;
case idxON_InstanceDefinition: // 22
rc = new InstanceDefinitionGeometry(pGeometry, parent);
break;
case idxON_InstanceReference: // 23
rc = new InstanceReferenceGeometry(pGeometry, parent);
break;
#if USING_V5_SDK
case idxON_Extrusion: //24
rc = new Extrusion(pGeometry, parent);
break;
#endif
case idxON_LinearDimension2: //25
rc = new LinearDimension(pGeometry, parent);
break;
case idxON_PointCloud: // 26
rc = new PointCloud(pGeometry, parent);
break;
case idxON_DetailView: // 27
rc = new DetailView(pGeometry, parent);
break;
case idxON_AngularDimension2: // 28
rc = new AngularDimension(pGeometry, parent);
break;
case idxON_RadialDimension2: // 29
rc = new RadialDimension(pGeometry, parent);
break;
case idxON_Leader: // 30
rc = new Leader(pGeometry, parent);
break;
case idxON_OrdinateDimension2: // 31
rc = new OrdinateDimension(pGeometry, parent);
break;
case idxON_Light: //32
rc = new Light(pGeometry, parent);
break;
case idxON_PointGrid: //33
rc = new Point3dGrid(pGeometry, parent);
break;
case idxON_MorphControl: //34
rc = new MorphControl(pGeometry, parent);
break;
case idxON_BrepLoop: //35
{
int loopindex = -1;
IntPtr pBrep = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref loopindex);
if (pBrep != IntPtr.Zero && loopindex >= 0)
{
Brep b = new Brep(pBrep, parent);
rc = b.Loops[loopindex];
}
}
break;
case idxON_BrepTrim: // 36
{
int trimindex = -1;
IntPtr pBrep = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref trimindex);
if (pBrep != IntPtr.Zero && trimindex >= 0)
{
Brep b = new Brep(pBrep, parent);
rc = b.Trims[trimindex];
}
}
break;
default:
rc = new UnknownGeometry(pGeometry, parent, subobject_index);
break;
}
return rc;
}
public RevSurface ToRevSurface()
{
return(RevSurface.CreateFromTorus(this));
}
protected override void SolveInstance(IGH_DataAccess DA)
{
Brep brep = null;
DA.GetData("Brep", ref brep);
if (!DA.GetData("Workplane", ref Workplane))
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Workplane missing. Default used (WorldXY).");
}
if (!DA.GetData("MachineTool", ref Tool))
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "MachineTool missing. Default used.");
}
bool male = false;
DA.GetData("Male", ref male);
bool flip = false;
DA.GetData("Flip", ref flip);
double angle = 60;
double hangle = angle / 360 * Math.PI;
double depth = 3;
Curve[] intersections;
Point3d[] intersection_points;
Rhino.Geometry.Intersect.Intersection.BrepPlane(brep, Workplane, Rhino.RhinoDoc.ActiveDoc.ModelAbsoluteTolerance, out intersections, out intersection_points);
if (intersections.Length < 1)
{
return;
}
BoundingBox bb = intersections[0].GetBoundingBox(Workplane);
double r = double.MaxValue;
for (int i = 0; i < 2; ++i)
{
for (int j = 0; j < 2; ++j)
{
for (int k = 0; k < 2; ++k)
{
r = Math.Min(bb.Corner((i == 1), (j == 1), (k == 1)).DistanceTo(Point3d.Origin), r);
}
}
}
List <Point3d> pts = new List <Point3d>();
double step = Math.Tan(hangle) * depth;
int num_grooves = (int)(r / step) + 5;
if (male)
{
depth *= -1;
}
for (int i = 0; i <= num_grooves; ++i)
{
pts.Add(new Point3d(step * i, 0.0, depth * ((Math.Abs(i) % 2) * 2 - 1)));
}
Polyline poly = new Polyline(pts);
Rhino.Geometry.RevSurface rev = RevSurface.Create(poly, new Line(Point3d.Origin, Vector3d.ZAxis));
rev.Transform(Transform.PlaneToPlane(Plane.WorldXY, Workplane));
Brep grooves = rev.ToBrep();
if (flip)
{
List <Brep> srfs = new List <Brep>();
for (int i = 0; i < grooves.Surfaces.Count; ++i)
{
srfs.Add(Brep.CreateFromSurface(grooves.Surfaces[i].Reverse(0)));
}
grooves = Brep.MergeBreps(srfs, 0.1);
}
Brep[] trims = brep.Trim(grooves, 0.1);
if (trims.Length < 1)
{
throw new Exception("Trim failed!");
}
Brep final = trims[0];
for (int i = 1; i < trims.Length; ++i)
{
final.Join(trims[i], 0.1, true);
}
trims = grooves.Trim(brep, 0.1);
for (int i = 0; i < trims.Length; ++i)
{
final.Join(trims[i], 0.1, true);
}
DA.SetData("Finger Joint", final);
}
