Esempio n. 1
0
    public static Rhino.Commands.Result AddTorus(Rhino.RhinoDoc doc)
    {
        const double major_radius = 4.0;
        const double minor_radius = 2.0;

        Rhino.Geometry.Plane      plane  = Rhino.Geometry.Plane.WorldXY;
        Rhino.Geometry.Torus      torus  = new Rhino.Geometry.Torus(plane, major_radius, minor_radius);
        Rhino.Geometry.RevSurface revsrf = torus.ToRevSurface();
        if (doc.Objects.AddSurface(revsrf) != Guid.Empty)
        {
            doc.Views.Redraw();
            return(Rhino.Commands.Result.Success);
        }
        return(Rhino.Commands.Result.Failure);
    }
Esempio n. 2
0
 public RevSurface ToRevSurface()
 {
     return(RevSurface.CreateFromSphere(this));
 }
Esempio n. 3
0
        internal static GeometryBase CreateGeometryHelper(IntPtr pGeometry, object parent, int subobjectIndex)
        {
            if (IntPtr.Zero == pGeometry)
            {
                return(null);
            }

            var type = UnsafeNativeMethods.ON_Geometry_GetGeometryType(pGeometry);

            if (type < 0)
            {
                return(null);
            }
            GeometryBase rc = null;

            switch (type)
            {
            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Curve: //1
                rc = new Curve(pGeometry, parent, subobjectIndex);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_NurbsCurve: //2
                rc = new NurbsCurve(pGeometry, parent, subobjectIndex);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_PolyCurve: // 3
                rc = new PolyCurve(pGeometry, parent, subobjectIndex);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_PolylineCurve: //4
                rc = new PolylineCurve(pGeometry, parent, subobjectIndex);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_ArcCurve: //5
                rc = new ArcCurve(pGeometry, parent, subobjectIndex);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_LineCurve: //6
                rc = new LineCurve(pGeometry, parent, subobjectIndex);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Mesh: //7
                rc = new Mesh(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Point: //8
                rc = new Point(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_TextDot: //9
                rc = new TextDot(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Surface: //10
                rc = new Surface(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Brep: //11
                rc = new Brep(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_NurbsSurface: //12
                rc = new NurbsSurface(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_RevSurface: //13
                rc = new RevSurface(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_PlaneSurface: //14
                rc = new PlaneSurface(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_ClippingPlaneSurface: //15
                rc = new ClippingPlaneSurface(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Hatch: // 17
                rc = new Hatch(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_SumSurface: //19
                rc = new SumSurface(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_BrepFace: //20
            {
                int    faceindex = -1;
                IntPtr ptr_brep  = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref faceindex);
                if (ptr_brep != IntPtr.Zero && faceindex >= 0)
                {
                    Brep b = new Brep(ptr_brep, parent);
                    rc = b.Faces[faceindex];
                }
            }
            break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_BrepEdge: // 21
            {
                int    edgeindex = -1;
                IntPtr ptr_brep  = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref edgeindex);
                if (ptr_brep != IntPtr.Zero && edgeindex >= 0)
                {
                    Brep b = new Brep(ptr_brep, parent);
                    rc = b.Edges[edgeindex];
                }
            }
            break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_InstanceReference: // 23
                rc = new InstanceReferenceGeometry(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Extrusion: //24
                rc = new Extrusion(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_PointCloud: // 26
                rc = new PointCloud(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_DetailView: // 27
                rc = new DetailView(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Light: //32
                rc = new Light(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_PointGrid: //33
                rc = new Point3dGrid(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_MorphControl: //34
                rc = new MorphControl(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_BrepLoop: //35
            {
                int    loopindex = -1;
                IntPtr ptr_brep  = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref loopindex);
                if (ptr_brep != IntPtr.Zero && loopindex >= 0)
                {
                    Brep b = new Brep(ptr_brep, parent);
                    rc = b.Loops[loopindex];
                }
            }
            break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_BrepTrim: // 36
            {
                int    trimindex = -1;
                IntPtr ptr_brep  = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref trimindex);
                if (ptr_brep != IntPtr.Zero && trimindex >= 0)
                {
                    Brep b = new Brep(ptr_brep, parent);
                    rc = b.Trims[trimindex];
                }
            }
            break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Leader: // 38
                rc = new Leader(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_SubD: // 39
                rc = new SubD(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_DimLinear: //40
                rc = new LinearDimension(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_DimAngular: //41
                rc = new AngularDimension(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_DimRadial: //42
                rc = new RadialDimension(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_DimOrdinate: //43
                rc = new OrdinateDimension(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Centermark: //44
                rc = new Centermark(pGeometry, parent);
                break;

            case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Text: //45
                rc = new TextEntity(pGeometry, parent);
                break;

            default:
                rc = new UnknownGeometry(pGeometry, parent, subobjectIndex);
                break;
            }

            return(rc);
        }
Esempio n. 4
0
 public RevSurface ToRevSurface()
 {
     return(RevSurface.CreateFromCylinder(this));
 }
Esempio n. 5
0
    internal static GeometryBase CreateGeometryHelper(IntPtr pGeometry, object parent, int subobject_index)
    {
      if (IntPtr.Zero == pGeometry)
        return null;

      int type = UnsafeNativeMethods.ON_Geometry_GetGeometryType(pGeometry);
      if (type < 0)
        return null;
      GeometryBase rc = null;

      switch (type)
      {
        case idxON_Curve: //1
          rc = new Curve(pGeometry, parent, subobject_index);
          break;
        case idxON_NurbsCurve: //2
          rc = new NurbsCurve(pGeometry, parent, subobject_index);
          break;
        case idxON_PolyCurve: // 3
          rc = new PolyCurve(pGeometry, parent, subobject_index);
          break;
        case idxON_PolylineCurve: //4
          rc = new PolylineCurve(pGeometry, parent, subobject_index);
          break;
        case idxON_ArcCurve: //5
          rc = new ArcCurve(pGeometry, parent, subobject_index);
          break;
        case idxON_LineCurve: //6
          rc = new LineCurve(pGeometry, parent, subobject_index);
          break;
        case idxON_Mesh: //7
          rc = new Mesh(pGeometry, parent);
          break;
        case idxON_Point: //8
          rc = new Point(pGeometry, parent);
          break;
        case idxON_TextDot: //9
          rc = new TextDot(pGeometry, parent);
          break;
        case idxON_Surface: //10
          rc = new Surface(pGeometry, parent);
          break;
        case idxON_Brep: //11
          rc = new Brep(pGeometry, parent);
          break;
        case idxON_NurbsSurface: //12
          rc = new NurbsSurface(pGeometry, parent);
          break;
        case idxON_RevSurface: //13
          rc = new RevSurface(pGeometry, parent);
          break;
        case idxON_PlaneSurface: //14
          rc = new PlaneSurface(pGeometry, parent);
          break;
        case idxON_ClippingPlaneSurface: //15
          rc = new ClippingPlaneSurface(pGeometry, parent);
          break;
        case idxON_Annotation2: // 16
          rc = new AnnotationBase(pGeometry, parent);
          break;
        case idxON_Hatch: // 17
          rc = new Hatch(pGeometry, parent);
          break;
        case idxON_TextEntity2: //18
          rc = new TextEntity(pGeometry, parent);
          break;
        case idxON_SumSurface: //19
          rc = new SumSurface(pGeometry, parent);
          break;
        case idxON_BrepFace: //20
          {
            int faceindex = -1;
            IntPtr pBrep = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref faceindex);
            if (pBrep != IntPtr.Zero && faceindex >= 0)
            {
              Brep b = new Brep(pBrep, parent);
              rc = b.Faces[faceindex];
            }
          }
          break;
        case idxON_BrepEdge: // 21
          {
            int edgeindex = -1;
            IntPtr pBrep = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref edgeindex);
            if (pBrep != IntPtr.Zero && edgeindex >= 0)
            {
              Brep b = new Brep(pBrep, parent);
              rc = b.Edges[edgeindex];
            }
          }
          break;
        case idxON_InstanceDefinition: // 22
          rc = new InstanceDefinitionGeometry(pGeometry, parent);
          break;
        case idxON_InstanceReference: // 23
          rc = new InstanceReferenceGeometry(pGeometry, parent);
          break;
#if USING_V5_SDK
        case idxON_Extrusion: //24
          rc = new Extrusion(pGeometry, parent);
          break;
#endif
        case idxON_LinearDimension2: //25
          rc = new LinearDimension(pGeometry, parent);
          break;
        case idxON_PointCloud: // 26
          rc = new PointCloud(pGeometry, parent);
          break;
        case idxON_DetailView: // 27
          rc = new DetailView(pGeometry, parent);
          break;
        case idxON_AngularDimension2: // 28
          rc = new AngularDimension(pGeometry, parent);
          break;
        case idxON_RadialDimension2: // 29
          rc = new RadialDimension(pGeometry, parent);
          break;
        case idxON_Leader: // 30
          rc = new Leader(pGeometry, parent);
          break;
        case idxON_OrdinateDimension2: // 31
          rc = new OrdinateDimension(pGeometry, parent);
          break;
        case idxON_Light: //32
          rc = new Light(pGeometry, parent);
          break;
        case idxON_PointGrid: //33
          rc = new Point3dGrid(pGeometry, parent);
          break;
        case idxON_MorphControl: //34
          rc = new MorphControl(pGeometry, parent);
          break;
        case idxON_BrepLoop: //35
          {
            int loopindex = -1;
            IntPtr pBrep = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref loopindex);
            if (pBrep != IntPtr.Zero && loopindex >= 0)
            {
              Brep b = new Brep(pBrep, parent);
              rc = b.Loops[loopindex];
            }
          }
          break;
        case idxON_BrepTrim: // 36
          {
            int trimindex = -1;
            IntPtr pBrep = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref trimindex);
            if (pBrep != IntPtr.Zero && trimindex >= 0)
            {
              Brep b = new Brep(pBrep, parent);
              rc = b.Trims[trimindex];
            }
          }
          break;
        default:
          rc = new UnknownGeometry(pGeometry, parent, subobject_index);
          break;
      }

      return rc;
    }
Esempio n. 6
0
 public RevSurface ToRevSurface()
 {
     return(RevSurface.CreateFromTorus(this));
 }
Esempio n. 7
0
        protected override void SolveInstance(IGH_DataAccess DA)
        {
            Brep brep = null;

            DA.GetData("Brep", ref brep);

            if (!DA.GetData("Workplane", ref Workplane))
            {
                AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Workplane missing. Default used (WorldXY).");
            }

            if (!DA.GetData("MachineTool", ref Tool))
            {
                AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "MachineTool missing. Default used.");
            }

            bool male = false;

            DA.GetData("Male", ref male);

            bool flip = false;

            DA.GetData("Flip", ref flip);

            double angle  = 60;
            double hangle = angle / 360 * Math.PI;
            double depth  = 3;

            Curve[]   intersections;
            Point3d[] intersection_points;
            Rhino.Geometry.Intersect.Intersection.BrepPlane(brep, Workplane, Rhino.RhinoDoc.ActiveDoc.ModelAbsoluteTolerance, out intersections, out intersection_points);
            if (intersections.Length < 1)
            {
                return;
            }

            BoundingBox bb = intersections[0].GetBoundingBox(Workplane);

            double r = double.MaxValue;

            for (int i = 0; i < 2; ++i)
            {
                for (int j = 0; j < 2; ++j)
                {
                    for (int k = 0; k < 2; ++k)
                    {
                        r = Math.Min(bb.Corner((i == 1), (j == 1), (k == 1)).DistanceTo(Point3d.Origin), r);
                    }
                }
            }

            List <Point3d> pts         = new List <Point3d>();
            double         step        = Math.Tan(hangle) * depth;
            int            num_grooves = (int)(r / step) + 5;

            if (male)
            {
                depth *= -1;
            }

            for (int i = 0; i <= num_grooves; ++i)
            {
                pts.Add(new Point3d(step * i, 0.0, depth * ((Math.Abs(i) % 2) * 2 - 1)));
            }

            Polyline poly = new Polyline(pts);

            Rhino.Geometry.RevSurface rev = RevSurface.Create(poly, new Line(Point3d.Origin, Vector3d.ZAxis));
            rev.Transform(Transform.PlaneToPlane(Plane.WorldXY, Workplane));

            Brep grooves = rev.ToBrep();


            if (flip)
            {
                List <Brep> srfs = new List <Brep>();
                for (int i = 0; i < grooves.Surfaces.Count; ++i)
                {
                    srfs.Add(Brep.CreateFromSurface(grooves.Surfaces[i].Reverse(0)));
                }
                grooves = Brep.MergeBreps(srfs, 0.1);
            }

            Brep[] trims = brep.Trim(grooves, 0.1);
            if (trims.Length < 1)
            {
                throw new Exception("Trim failed!");
            }

            Brep final = trims[0];

            for (int i = 1; i < trims.Length; ++i)
            {
                final.Join(trims[i], 0.1, true);
            }

            trims = grooves.Trim(brep, 0.1);
            for (int i = 0; i < trims.Length; ++i)
            {
                final.Join(trims[i], 0.1, true);
            }

            DA.SetData("Finger Joint", final);
        }