public String BuildQuery(string sid, IList <EDownParamGY> cmds, EChannelType ctype)
{
StringBuilder sb = new StringBuilder();
//sb.Append(Encoding.ASCII.GetBytes("01"));// 添加首字符
sb.Append("\u0001");// 测试
//sb.Append(String.Format("{0:D10}", Int32.Parse(sid.Trim())));// 添加遥测站地址
//sb.Append(String.Format("{0:D2}", Int32.Parse(sid.Trim())));// 添加中心站地址
//sb.Append(String.Format("{0:D4}", Int32.Parse(sid.Trim())));// 添加密码
//sb.Append(String.Format("{0:D2}", Int32.Parse(sid.Trim())));// 添加功能码
sb.Append("00"); // 添加中心站地址
sb.Append(String.Format("{0:D10}", Int32.Parse(sid.Trim()))); // 添加遥测站地址
sb.Append("1234"); // 添加密码
sb.Append("45");
int dataLength = 16;
string length1 = Convert.ToString(dataLength, 16);
string flag = "8" + "0" + length1;
sb.Append(flag);
sb.Append("\u0002"); // 测试
sb.Append("0000"); // 添加下行流水号
int length = 4; // 指令的长度
foreach (var cmd in cmds)
{
switch (cmd)
{
case EDownParamGY.ontime: // 发报时间
sb.Append(timeToString()); length += 12; break;
case EDownParamGY.oldPwd: // 旧密码
sb.Append("03");
sb.Append(CSpecialChars.BALNK_CHAR);
sb.Append("1234");
sb.Append(CSpecialChars.BALNK_CHAR); length += 8; break;
case EDownParamGY.newPwd: // 新密码
sb.Append("03");
sb.Append(CSpecialChars.BALNK_CHAR);
sb.Append("4321"); length += 7; break;
case EDownParamGY.memoryReset: // 初始化固态存储
sb.Append("97"); length += 2; break;
case EDownParamGY.timeFrom_To: // 时段起止时间
sb.Append(ProtocolMaps.DownParamMapGY.FindValue(cmd));
sb.Append(CSpecialChars.BALNK_CHAR); length += 17; break;
/*case EDownParam.timeTo:// 时段结束时间
* sb.Append(ProtocolMaps.DownParamMap.FindValue(cmd));
* sb.Append(CSpecialChars.BALNK_CHAR); length += 9; break;*/
case EDownParamGY.DRZ: // 1 小时内 5 分钟间隔相对水位
sb.Append("DRZ");
sb.Append(ProtocolMaps.DownParamMapGY.FindValue(cmd));
sb.Append(CSpecialChars.BALNK_CHAR); length += 4; break;
case EDownParamGY.DRP: // 1 小时内每 5 分钟时段雨量
sb.Append("DRP");
sb.Append(CSpecialChars.BALNK_CHAR); length += 4; break;
case EDownParamGY.Step: // 时间步长码
sb.Append("DR");
sb.Append(ProtocolMaps.DownParamMapGY.FindValue(cmd));
sb.Append(CSpecialChars.BALNK_CHAR); length += 6; break;
case EDownParamGY.basicConfig: // 遥测站基本配置读取/修改
/*for (var in ) {
* sb.Append(cmd);
* sb.Append(CSpecialChars.BALNK_CHAR);
* if (ProtocolMaps.DownParamMap.FindValue(cmd) != null)
* {
* sb.Append(CSpecialChars.BALNK_CHAR);
* length += 4 + Int32.Parse(ProtocolMaps.DownParamLengthMap[cmd]);
* }
* else
* length += 3;
* }*/
break;
case EDownParamGY.operatingPara: // 运行参数读取/修改
/*for (var in ){
* sb.Append(cmd);
* sb.Append(CSpecialChars.BALNK_CHAR);
* if (ProtocolMaps.DownParamMap.FindValue(cmd) != null)
* {
* sb.Append(CSpecialChars.BALNK_CHAR);
* length += 4 + Int32.Parse(ProtocolMaps.DownParamLengthMap[cmd]);
* }
* else
* length += 3;
* }*/
break;
case EDownParamGY.Reset: // 恢复出厂设置
sb.Append("98"); length += 2; break;
case EDownParamGY.ICconfig: // 设罝遥测站IC卡状态
sb.Append("ZT");
sb.Append(CSpecialChars.BALNK_CHAR);
sb.Append(ProtocolMaps.DownParamMapGY.FindValue(cmd)); length += 11; break;
case EDownParamGY.pumpCtrl: // 控制水泵状态
sb.Append(ProtocolMaps.DownParamMapGY.FindValue(cmd));
length += Int32.Parse(ProtocolMaps.DownParamLengthMapGY[cmd]); break;
case EDownParamGY.valveCtrl: // 控制阀门状态
sb.Append(ProtocolMaps.DownParamMapGY.FindValue(cmd));
length += Int32.Parse(ProtocolMaps.DownParamLengthMapGY[cmd]); break;
case EDownParamGY.gateCtrl: // 控制闸门状态
sb.Append(ProtocolMaps.DownParamMapGY.FindValue(cmd));
length += Int32.Parse(ProtocolMaps.DownParamLengthMapGY[cmd]); break;
case EDownParamGY.waterYield: // 水量定值控制
sb.Append(ProtocolMaps.DownParamMapGY.FindValue(cmd));
length += 2; break;
default:
throw new Exception("设置下行指令参数错误");
}
}
//sb.Insert(19, String.Format("{0:D1}", 8));// 添加报文标识
//length = 10;
//Insert(20, String.Format("{0:X3}", length));// 添加报文长度
sb.Append("\u0003");
string dataMsg = sb.ToString();
string crcMsg = CRC.ToCRC16(dataMsg, false);
string resut = dataMsg + crcMsg;
return(resut);
}
public String BuildQuery(string sid, IList <EDownParamGY> cmds, EChannelType ctype)
{
StringBuilder sb = new StringBuilder();
sb.Append("\u0001"); // 测试
sb.Append(String.Format("{0:D10}", Int32.Parse(sid.Trim()))); // 添加遥测站地址
sb.Append(String.Format("{0:D2}", "00")); // 添加中心站地址
sb.Append(String.Format("{0:D4}", "1234")); // 添加密码
sb.Append("\u0002"); // 添加单包起始和结束符
sb.Append("0000"); // 添加下行流水号
sb.Append(timeToString()); // 添加发报时间
int length = 16; // 指令的长度
foreach (var cmd in cmds)
{
switch (cmd)
{
case EDownParamGY.Rdata: // 查询遥测站实时数据
sb.Insert(17, "37"); // 添加功能码
break;
case EDownParamGY.ArtifN: // 查询人工置数
sb.Insert(17, "39");
break;
case EDownParamGY.Selement: // 查询指定要素
sb.Insert(17, "3A");
break;
case EDownParamGY.pumpRead: // 查询水泵实时数据
sb.Insert(17, "44");
break;
case EDownParamGY.version: // 查询软件版本
sb.Insert(17, "45");
break;
case EDownParamGY.alarm: // 查询报警信息
sb.Insert(17, "46");
break;
case EDownParamGY.clockset: // 设置遥测站时钟
sb.Insert(17, "4A");
break;
case EDownParamGY.history: // 查询事件记录
sb.Insert(17, "50");
break;
case EDownParamGY.clocksearch: // 查询遥测站时钟
sb.Insert(17, "51");
break;
case EDownParamGY.oldPwd: // 旧密码
sb.Insert(17, "49"); // 添加功能码
sb.Append("03");
sb.Append(CSpecialChars.BALNK_CHAR);
sb.Append("1234");
sb.Append(CSpecialChars.BALNK_CHAR); length += 8; break;
case EDownParamGY.newPwd: // 新密码
sb.Append("03");
sb.Append(CSpecialChars.BALNK_CHAR);
sb.Append("4321"); length += 7; break;
case EDownParamGY.memoryReset: // 初始化固态存储
sb.Insert(17, "47"); // 添加功能码（初始化固态存储数据）
sb.Append("97"); length += 2; break;
case EDownParamGY.timeFrom_To: // 时段起止时间
sb.Insert(17, "38"); // 添加功能码（查询遥测站时段数据）
sb.Append("1401231014012311");
sb.Append(CSpecialChars.BALNK_CHAR); length += 17; break;
/*case EDownParam.timeTo:// 时段结束时间
* sb.Append(ProtocolMaps.DownParamMap.FindValue(cmd));
* sb.Append(CSpecialChars.BALNK_CHAR); length += 9; break;*/
case EDownParamGY.DRZ: // 1 小时内 5 分钟间隔相对水位
sb.Append("DRZ1");
//sb.Append(ProtocolMaps.DownParamMapGY.FindValue(cmd));
sb.Append(CSpecialChars.BALNK_CHAR); length += 5; break;
case EDownParamGY.DRP: // 1 小时内每 5 分钟时段雨量
sb.Append("DRP");
sb.Append(CSpecialChars.BALNK_CHAR); length += 4; break;
case EDownParamGY.Step: // 时间步长码
sb.Append("DR");
sb.Append(ProtocolMaps.DownParamMapGY.FindValue(cmd));
sb.Append(CSpecialChars.BALNK_CHAR); length += 6; break;
case EDownParamGY.basicConfigRead: // 遥测站基本配置读取
sb.Insert(17, "41");
/*for (var in ) {
* sb.Append(cmd);
* sb.Append(CSpecialChars.BALNK_CHAR);
* length += 3;
* }*/
break;
case EDownParamGY.basicConfigModify: // 遥测站基本配置修改
sb.Insert(17, "40");
/*for (var in ) {
* sb.Append(cmd);
* sb.Append(CSpecialChars.BALNK_CHAR);
* if (ProtocolMaps.DownParamMap.FindValue(cmd) != null)
* {
* sb.Append(ProtocolMaps.DownParamMap.FindValue(cmd));
* sb.Append(CSpecialChars.BALNK_CHAR);
* length += 4 + Int32.Parse(ProtocolMaps.DownParamLengthMap[cmd]);
* }
* else
* length += 3;
* }*/
break;
case EDownParamGY.operatingParaRead: // 运行参数读取
sb.Insert(17, "43");
/*for (var in ){
* sb.Append(cmd);
* sb.Append(CSpecialChars.BALNK_CHAR);
* length += 3;
* }*/
break;
case EDownParamGY.operatingParaModify: // 运行参数修改
sb.Insert(17, "42");
/*for (var in ){
* sb.Append(cmd);
* sb.Append(CSpecialChars.BALNK_CHAR);
* if (ProtocolMaps.DownParamMap.FindValue(cmd) != null)
* {
* sb.Append(ProtocolMaps.DownParamMap.FindValue(cmd));
* sb.Append(CSpecialChars.BALNK_CHAR);
* length += 4 + Int32.Parse(ProtocolMaps.DownParamLengthMap[cmd]);
* }
* else
* length += 3;
* }*/
break;
case EDownParamGY.Reset: // 恢复出厂设置
sb.Insert(17, "48");
sb.Append("98"); length += 2; break;
case EDownParamGY.ICconfig: // 设罝遥测站IC卡状态
sb.Insert(17, "4B");
sb.Append("ZT");
sb.Append(CSpecialChars.BALNK_CHAR);
sb.Append(ProtocolMaps.DownParamMapGY.FindValue(cmd)); length += 11; break;
case EDownParamGY.pumpCtrl: // 控制水泵状态
sb.Insert(17, "4C");
sb.Append(ProtocolMaps.DownParamMapGY.FindValue(cmd));
length += Int32.Parse(ProtocolMaps.DownParamLengthMapGY[cmd]); break;
case EDownParamGY.valveCtrl: // 控制阀门状态
sb.Insert(17, "4D");
sb.Append(ProtocolMaps.DownParamMapGY.FindValue(cmd));
length += Int32.Parse(ProtocolMaps.DownParamLengthMapGY[cmd]); break;
case EDownParamGY.gateCtrl: // 控制闸门状态
sb.Insert(17, "4E");
sb.Append(ProtocolMaps.DownParamMapGY.FindValue(cmd));
length += Int32.Parse(ProtocolMaps.DownParamLengthMapGY[cmd]); break;
case EDownParamGY.waterYield: // 水量定值控制
sb.Insert(17, "4F");
sb.Append(ProtocolMaps.DownParamMapGY.FindValue(cmd));
length += 2; break;
default:
throw new Exception("设置下行指令参数错误");
}
}
sb.Insert(19, String.Format("{0:D1}", 8)); // 添加报文标识
sb.Insert(20, String.Format("{0:X3}", length)); // 添加报文长度
sb.Append("\u0005");
string dataMsg = sb.ToString();
string crcMsg = CRC.ToCRC16(dataMsg, false);
string resut = dataMsg + crcMsg;
return(resut);
}
public string BuildSet(string sid, IList <EDownParamGY> cmds, CDownConfGY down, EChannelType ctype)
{
StringBuilder sb = new StringBuilder();
sb.Append("\u0001"); // 添加首字符
sb.Append(String.Format("{0:D10}", Int32.Parse(sid.Trim()))); // 添加遥测站地址
sb.Append(String.Format("{0:D2}", "00")); // 添加中心站地址
sb.Append(String.Format("{0:D4}", "1234")); // 添加密码
sb.Append("\u0002"); // 添加单包起始和结束符
sb.Append("0000"); // 添加下行流水号
sb.Append(timeToString()); // 添加发报时间
int length = 16; // 指令的长度
foreach (var cmd in cmds)
{
switch (cmd)
{
case EDownParamGY.ICconfig: // 设罝遥测站IC卡状态
sb.Insert(17, "4B");
sb.Append("ZT");
sb.Append(CSpecialChars.BALNK_CHAR);
sb.Append(down.ICconfig); length += 11; break;
case EDownParamGY.pumpCtrl: // 控制水泵状态
sb.Insert(17, "4C");
sb.Append(down.PumpCtrl);
length += down.PumpCtrl.Length; break;
case EDownParamGY.valveCtrl: // 控制阀门状态
sb.Insert(17, "4D");
sb.Append(down.ValveCtrl);
length += down.ValveCtrl.Length; break;
case EDownParamGY.gateCtrl: // 控制闸门状态
sb.Insert(17, "4E");
sb.Append(down.GateCtrl);
length += down.GateCtrl.Length; break;
case EDownParamGY.oldPwd: // 旧密码
sb.Insert(17, "49"); // 添加功能码
sb.Append("03");
sb.Append(CSpecialChars.BALNK_CHAR);
sb.Append(down.OldPwd);
sb.Append(CSpecialChars.BALNK_CHAR); length += 8; break;
case EDownParamGY.newPwd: // 新密码
sb.Append("03");
sb.Append(CSpecialChars.BALNK_CHAR);
sb.Append(down.NewPwd); length += 7; break;
case EDownParamGY.basicConfigModify: // 遥测站基本配置修改
sb.Insert(17, "40");
/*for (var in ) {
* sb.Append(cmd);
* sb.Append(CSpecialChars.BALNK_CHAR);
* if (ProtocolMaps.DownParamMap.FindValue(cmd) != null)
* {
* sb.Append(ProtocolMaps.DownParamMap.FindValue(cmd));
* sb.Append(CSpecialChars.BALNK_CHAR);
* length += 4 + Int32.Parse(ProtocolMaps.DownParamLengthMap[cmd]);
* }
* else
* length += 3;
* }*/
break;
case EDownParamGY.operatingParaModify: // 运行参数修改
sb.Insert(17, "42");
/*for (var in ){
* sb.Append(cmd);
* sb.Append(CSpecialChars.BALNK_CHAR);
* if (ProtocolMaps.DownParamMap.FindValue(cmd) != null)
* {
* sb.Append(ProtocolMaps.DownParamMap.FindValue(cmd));
* sb.Append(CSpecialChars.BALNK_CHAR);
* length += 4 + Int32.Parse(ProtocolMaps.DownParamLengthMap[cmd]);
* }
* else
* length += 3;
* }*/
break;
case EDownParamGY.waterYield: // 水量定值控制
sb.Append(down.WaterYield);
sb.Insert(17, "4F"); // 插入功能码
length += 2; break;
case EDownParamGY.clockset: // 设置遥测站时钟
sb.Insert(17, "4A");
break;
default:
throw new Exception("设置下行指令参数错误");
}
}
sb.Insert(19, String.Format("{0:D1}", 8)); // 添加报文标识
sb.Insert(20, String.Format("{0:X3}", length)); // 添加报文长度
sb.Append("\u0003"); // 添加结束符
string dataMsg = sb.ToString();
string crcMsg = CRC.ToCRC16(dataMsg, false);
string resut = dataMsg + crcMsg;
return(resut);
throw new NotImplementedException();
}
public string BuildQuery_Flash(string sid, EStationType stationType, ETrans trans, DateTime beginTime, DateTime endTime, EChannelType ctype)
{
StringBuilder sb = new StringBuilder();
sb.Append("\u0001"); // 添加首字符
sb.Append(String.Format("{0:D10}", Int32.Parse(sid.Trim()))); // 添加遥测站地址
sb.Append(String.Format("{0:D2}", "00")); // 添加中心站地址
sb.Append(String.Format("{0:D4}", "1234")); // 添加密码
sb.Append("\u0002"); // 添加单包起始和结束符
sb.Append("0000"); // 添加下行流水号
sb.Append(timeToString()); // 添加发报时间
int length = 16; // 指令的长度
//截取时间段的str
string year = beginTime.Year.ToString().Substring(2, 2);
string month = beginTime.Month.ToString();
if (month.Length < 2)
{
month = "0" + month;
}
string day = beginTime.Day.ToString();
if (day.Length < 2)
{
day = "0" + day;
}
string hour = beginTime.Hour.ToString();
if (hour.Length < 2)
{
hour = "0" + hour;
}
string strtMsg = year + month + day + hour;
year = endTime.Year.ToString().Substring(2, 2);
month = endTime.Month.ToString();
if (month.Length < 2)
{
month = "0" + month;
}
day = endTime.Day.ToString();
if (day.Length < 2)
{
day = "0" + day;
}
hour = endTime.Hour.ToString();
if (hour.Length < 2)
{
hour = "0" + hour;
}
string endMsg = year + month + day + hour;
string msg = strtMsg + endMsg;
//条件判定 暂时不需要
if (true)
{
sb.Insert(17, "38");// 添加功能码（查询遥测站时段数据）
sb.Append(msg);
sb.Append(CSpecialChars.BALNK_CHAR);
sb.Append("DRN05");
sb.Append(CSpecialChars.BALNK_CHAR);
sb.Append("DRP");
length += 26;
}
sb.Insert(19, String.Format("{0:D1}", 8)); // 添加报文标识
sb.Insert(20, String.Format("{0:X3}", length)); // 添加报文长度
sb.Append("\u0005"); // 添加结束符
string dataMsg = sb.ToString();
string crcMsg = CRC.ToCRC16(dataMsg, false);
string resut = dataMsg + crcMsg;
return(resut);
}