public void ClearALLDigitalPort()
{
for (int i = 0; i != 8; i++)
{
DaqBoard.DBitOut(BitPort, i, DigitalLogicState.Low);
}
}
public void TurnOn(int index)
{
relaybox.DBitOut(MccDaq.DigitalPortType.FirstPortA, index - 1, MccDaq.DigitalLogicState.High);
Thread.Sleep(10);
relaybox.DBitOut(MccDaq.DigitalPortType.FirstPortA, index - 1, MccDaq.DigitalLogicState.High);
currentPumpState[index] = true;
}
private void chkSetBit_CheckStateChanged(object eventSender, System.EventArgs eventArgs)
{
string PortName;
int BitNum = Array.IndexOf(chkSetBit, eventSender);
MccDaq.DigitalPortType BitPort;
MccDaq.DigitalLogicState BitValue = MccDaq.DigitalLogicState.Low;
if (chkSetBit[BitNum].Checked)
{
BitValue = MccDaq.DigitalLogicState.High;
}
//the port must be AuxPort or FirstPortA for bit output
BitPort = MccDaq.DigitalPortType.AuxPort;
if (PortNum > MccDaq.DigitalPortType.AuxPort)
{
BitPort = MccDaq.DigitalPortType.FirstPortA;
}
MccDaq.ErrorInfo ULStat = DaqBoard.DBitOut(BitPort, FirstBit + BitNum, BitValue);
PortName = BitPort.ToString();
int BitSet = FirstBit + BitNum;
lblValueSet.Text = PortName + ", bit " + BitSet.ToString()
+ " value set to " + BitValue.ToString();
}
private void chkSetBit_CheckStateChanged(object eventSender, System.EventArgs eventArgs)
{
MccDaq.DigitalPortType PortType;
int BitNum = Array.IndexOf(chkSetBit, eventSender);
// For boards whose first port is not FIRSTPORTA (such as the USB-ERB08
// and the USB-SSR08) offset the BitNum by FirstBit
if (PortNum == MccDaq.DigitalPortType.AuxPort)
{
PortType = MccDaq.DigitalPortType.AuxPort;
}
else
{
PortType = MccDaq.DigitalPortType.FirstPortA;
}
MccDaq.DigitalLogicState BitValue = MccDaq.DigitalLogicState.Low;
if (chkSetBit[BitNum].Checked)
{
BitValue = MccDaq.DigitalLogicState.High;
}
MccDaq.ErrorInfo ULStat = DaqBoard.DBitOut(PortType, FirstBit + BitNum, BitValue);
}
private void chkSetBit_CheckStateChanged(object eventSender, System.EventArgs eventArgs)
{
int BitNum = Array.IndexOf(chkSetBit, eventSender);
MccDaq.DigitalLogicState BitValue = MccDaq.DigitalLogicState.Low;
if (chkSetBit[BitNum].Checked)
{
BitValue = MccDaq.DigitalLogicState.High;
}
MccDaq.DigitalPortType PortType = PortNum;
MccDaq.ErrorInfo ULStat = DaqBoard.DBitOut(PortType, BitNum, BitValue);
if (ULStat.Value == MccDaq.ErrorInfo.ErrorCode.BadBitNumber)
{
MessageBox.Show("Boards only supports bit numbers less than " + BitNum.ToString("0"), "Bit value too high", 0);
}
}
public ErrorInfo.ErrorCode Set(DigitalPortType port, int outputID, DigitalLogicState state)
{
lock (this)
{
Console.WriteLine(String.Format("port: {0}, outputID: {1}, state: {2}", port, outputID, state));
if (!BoardFound)
{
return(ErrorInfo.ErrorCode.BoardNotExist);
}
if (port == DigitalPortType.FirstPortA && outputID >= 0 && outputID <= 7)
{
MccDaq.ErrorInfo ULStat;
ULStat = DaqBoard.DBitOut(port, outputID, state);
return(PrintError(ULStat));
}
else
{
SimpleLogger.Logger.Log("Port Not supported");
Environment.Exit(1);
return(ErrorInfo.ErrorCode.InvalidNetPort);
}
}
}
private void switch_relay(object sender, EventArgs e)
{
if (relayBoard == null)
{
MessageBox.Show("Initialize a device first", "Error");
return;
}
Button b = (Button)sender;
int relayNumber = Convert.ToInt32(b.Tag);
if (relayStatus[relayNumber - 1] == false)
{
relayStatus[relayNumber - 1] = true;
relayBoard.DBitOut(DigitalPortType.FirstPortA, relayNumber + 15, DigitalLogicState.High);
}
else
{
relayStatus[relayNumber - 1] = false;
relayBoard.DBitOut(DigitalPortType.FirstPortA, relayNumber + 15, DigitalLogicState.Low);
}
}
// This function turns on the heater coils according to the string
// parameter passed to it. Usable string parameters are: "all", "0",
// "1", "2", and "none"; "all" and "none" turn on/off all the coils,
// while "0", "1", "2" turns on the coil corresponding to that channel
// output from the USB-TC device.
private void TC_channel_out(str channel)
{
MccBoard daq = new MccDaq.MccBoard(BoardNum);
MccDaq.ErrorInfo RetVal;
for (int i = 0; i < 6; i++)
{
RetVal = daq.DConfigBit(DigitalPortType.AuxPort, i,
DigitalPortDirection.DigitalOut);
IsError(this,RetVal,true);
}
switch (channel)
{
case "all_coils":
for (int i = 0; i < 3; i++)
{
RetVal = daq.DBitOut(DigitalPortType.AuxPort, i,
DigitalLogicState.High);
IsError(this,RetVal, true);
}
break;
case "no_coils":
for (int i = 0; i < 3; i++)
{
RetVal = daq.DBitOut(DigitalPortType.AuxPort, i,
DigitalLogicState.Low);
IsError(this,RetVal, true);
}
break;
case "no_air":
for (int i = 3; i < 6; i++)
{
RetVal = daq.DBitOut(DigitalPortType.AuxPort, i,
DigitalLogicState.Low);
IsError(this,RetVal, true);
}
break;
case "inner":
RetVal = daq.DBitOut(DigitalPortType.AuxPort, 0,
DigitalLogicState.High);
IsError(this,RetVal, true);
break;
case "sample_zone":
RetVal = daq.DBitOut(DigitalPortType.AuxPort, 1,
DigitalLogicState.High);
IsError(this,RetVal, true);
break;
case "outer":
RetVal = daq.DBitOut(DigitalPortType.AuxPort, 2,
DigitalLogicState.High);
IsError(this,RetVal, true);
break;
case "high_n2":
RetVal = daq.DBitOut(DigitalPortType.AuxPort, 3,
DigitalLogicState.High);
IsError(this, RetVal, true);
break;
case "air":
RetVal = daq.DBitOut(DigitalPortType.AuxPort, 4,
DigitalLogicState.High);
IsError(this, RetVal, true);
break;
case "low_n2":
RetVal = daq.DBitOut(DigitalPortType.AuxPort, 5,
DigitalLogicState.High);
IsError(this, RetVal, true);
break;
default:
RetVal = new ErrorInfo(1);
MessageBox.Show("TC_channel_out() called with invalid parameter!",
" " + "ERROR!");
break;
}
RetVal = daq.DConfigBit(DigitalPortType.AuxPort, 0,
DigitalPortDirection.DigitalOut);
if (IsError(this, RetVal, true) == 0)
{
MessageBox.Show("TC_out function error!");
return;
}
}
// This function turns on the heater coils according to the string
// parameter passed to it. Usable string parameters are: "all", "0",
// "1", "2", and "none"; "all" and "none" turn on/off all the coils,
// while "0", "1", "2" turns on the coil corresponding to that channel
// output from the USB-TC device.
private void coils_on(string state)
{
MccBoard daq = new MccDaq.MccBoard(BoardNum);
MccDaq.ErrorInfo RetVal;
for (int i = 0; i < 3; i++)
{
RetVal = daq.DConfigBit(DigitalPortType.AuxPort, i,
DigitalPortDirection.DigitalOut);
IsError(RetVal);
}
switch (state)
{
case "all":
for (int i = 0; i < 3; i++)
{
RetVal = daq.DBitOut(DigitalPortType.AuxPort, i,
DigitalLogicState.High);
IsError(RetVal);
}
break;
case "0":
RetVal = daq.DBitOut(DigitalPortType.AuxPort, 0,
DigitalLogicState.High);
IsError(RetVal);
break;
case "1":
RetVal = daq.DBitOut(DigitalPortType.AuxPort, 1,
DigitalLogicState.High);
IsError(RetVal);
break;
case "2":
RetVal = daq.DBitOut(DigitalPortType.AuxPort, 2,
DigitalLogicState.High);
IsError(RetVal);
break;
case "none":
for (int i = 0; i < 3; i++)
{
RetVal = daq.DBitOut(DigitalPortType.AuxPort, i,
DigitalLogicState.Low);
IsError(RetVal);
}
break;
default:
MessageBox.Show("coils_on() called with invalid parameter!",
" " + "ERROR!");
break;
}
RetVal = daq.DConfigBit(DigitalPortType.AuxPort, 0,
DigitalPortDirection.DigitalOut);
IsError(RetVal);
}
/// <summary>
/// portNumber from 8-23
/// </summary>
/// <param name="portNumber">Port number</param>
/// <param name="BitValue">DigitalLogicState</param>
public void DigitOutput(int portNumber, MccDaq.DigitalLogicState BitValue)
{
DaqBoard.DBitOut(BitPort, portNumber, BitValue);
}
private void air_channel_out(AirChanStatusEnum state)
{
MccBoard daq = new MccDaq.MccBoard(BoardNum);
MccDaq.ErrorInfo RetVal;
for (int i = 3; i < 6; i++)
{
RetVal = daq.DConfigBit(DigitalPortType.AuxPort, i,
DigitalPortDirection.DigitalOut);
IsError(this, RetVal, true);
}
switch (state)
{
case AirChanStatusEnum.air_off:
for (int i = 3; i < 6; i++)
{
RetVal = daq.DBitOut(DigitalPortType.AuxPort, i,
DigitalLogicState.Low);
IsError(this, RetVal, true);
}
break;
case AirChanStatusEnum.low_n2:
RetVal = daq.DBitOut(DigitalPortType.AuxPort, 5,
DigitalLogicState.High);
IsError(this, RetVal, true);
break;
case AirChanStatusEnum.high_n2:
RetVal = daq.DBitOut(DigitalPortType.AuxPort, 3,
DigitalLogicState.High);
IsError(this, RetVal, true);
break;
case AirChanStatusEnum.air:
RetVal = daq.DBitOut(DigitalPortType.AuxPort, 4,
DigitalLogicState.High);
IsError(this, RetVal, true);
break;
default:
RetVal = new ErrorInfo(1);
MessageBox.Show("air_channel_out() called with invalid parameter!",
" " + "ERROR!");
break;
}
RetVal = daq.DConfigBit(DigitalPortType.AuxPort, 0,
DigitalPortDirection.DigitalOut);
if (IsError(this, RetVal, true) == 0)
{
air_status = state;
}
}
// This function turns on the heater coils according to the string
// parameter passed to it. Usable string parameters are: "all", "0",
// "1", "2", and "none"; "all" and "none" turn on/off all the coils,
// while "0", "1", "2" turns on the coil corresponding to that channel
// output from the USB-TC device.
private void oven_channel_out(OvenChanStatusEnum state)
{
MccBoard daq = new MccDaq.MccBoard(BoardNum);
MccDaq.ErrorInfo RetVal;
for (int i = 0; i < 3; i++)
{
RetVal = daq.DConfigBit(DigitalPortType.AuxPort, i,
DigitalPortDirection.DigitalOut);
IsError(this,RetVal,true);
}
switch (state)
{
case OvenChanStatusEnum.oven_on:
for (int i = 0; i < 3; i++)
{
RetVal = daq.DBitOut(DigitalPortType.AuxPort, i,
DigitalLogicState.High);
IsError(this,RetVal, true);
}
break;
case OvenChanStatusEnum.oven_off:
for (int i = 0; i < 3; i++)
{
RetVal = daq.DBitOut(DigitalPortType.AuxPort, i,
DigitalLogicState.Low);
IsError(this,RetVal, true);
}
break;
case OvenChanStatusEnum.all_off:
for (int i = 0; i < 3; i++)
{
RetVal = daq.DBitOut(DigitalPortType.AuxPort, i,
DigitalLogicState.Low);
IsError(this,RetVal, true);
}
break;
case OvenChanStatusEnum.inner:
RetVal = daq.DBitOut(DigitalPortType.AuxPort, 0,
DigitalLogicState.High);
IsError(this,RetVal, true);
break;
case OvenChanStatusEnum.SZ:
RetVal = daq.DBitOut(DigitalPortType.AuxPort, 1,
DigitalLogicState.High);
IsError(this,RetVal, true);
break;
case OvenChanStatusEnum.outer:
RetVal = daq.DBitOut(DigitalPortType.AuxPort, 2,
DigitalLogicState.High);
IsError(this,RetVal, true);
break;
default:
RetVal = new ErrorInfo(1);
MessageBox.Show("oven_channel_out() called with invalid parameter!",
" " + "ERROR!");
break;
}
RetVal = daq.DConfigBit(DigitalPortType.AuxPort, 0,
DigitalPortDirection.DigitalOut);
if (IsError(this, RetVal, true) == 0)
{
oven_status = state;
SetHeatingElementStatus(state);
}
}