private DialogResult OperationReliability(EdtInterventionActivityData pluginData)
{
SleepWakeMethod sleepWakeMethod = EnumUtil.Parse <SleepWakeMethod>(pluginData.TestMethod);
WakeMethod wakeMethod;
var result = DialogResult.None;
//first let's prompt the user how we need to put the device for Sleep
switch (sleepWakeMethod)
{
case SleepWakeMethod.Sleep:
if (pluginData.AlertMessage.Length > 5)
{
MessageBox.Show(pluginData.AlertMessage, @"Prerequisites", MessageBoxButtons.OK, MessageBoxIcon.Information, MessageBoxDefaultButton.Button1, MessageBoxOptions.DefaultDesktopOnly);
}
result = MessageBox.Show(
@"Put the device into sleep. Press Yes once device goes to sleep.", @"Sleep", MessageBoxButtons.YesNo, MessageBoxIcon.Information, MessageBoxDefaultButton.Button1, MessageBoxOptions.DefaultDesktopOnly);
break;
case SleepWakeMethod.Wake:
if (pluginData.AlertMessage.Length > 5)
{
MessageBox.Show(pluginData.AlertMessage, @"Prerequisites", MessageBoxButtons.OK, MessageBoxIcon.Information, MessageBoxDefaultButton.Button1, MessageBoxOptions.DefaultDesktopOnly);
}
result = MessageBox.Show(
@"Did the device woke up by " + pluginData.WakeMethod + " and behaved as expected?.", @"Wake up", MessageBoxButtons.YesNo, MessageBoxIcon.Information, MessageBoxDefaultButton.Button1, MessageBoxOptions.DefaultDesktopOnly);
break;
}
if (sleepWakeMethod != SleepWakeMethod.Sleep)
{
wakeMethod = EnumUtil.Parse <WakeMethod>(pluginData.WakeMethod);
var log = new ActivityExecutionDetailLog(_executionData, "WakeMethod", wakeMethod.GetDescription());
ExecutionServices.DataLogger.Submit(log);
if (result == DialogResult.Yes)
{
UpdateStatus($"Device woken up by {wakeMethod.GetDescription()}");
}
else
{
UpdateStatus($"Device didn't wake up. Entering a fault event");
result = DialogResult.No;
}
}
else
{
var log = new ActivityExecutionDetailLog(_executionData, "SleepMethod", sleepWakeMethod.GetDescription());
ExecutionServices.DataLogger.Submit(log);
if (result == DialogResult.Yes)
{
UpdateStatus("Device has entered Almost 1 Watt sleep.");
}
}
return(result);
}
public PluginExecutionResult Execute(PluginExecutionData executionData)
{
DialogResult result;
_executionData = executionData;
EdtInterventionActivityData pluginData = executionData.GetMetadata <EdtInterventionActivityData>();
switch (pluginData.TestType)
{
case EdtTestType.None:
default:
{
result = MessageBox.Show(pluginData.AlertMessage, @"EDT", MessageBoxButtons.YesNoCancel,
MessageBoxIcon.Question, MessageBoxDefaultButton.Button1, MessageBoxOptions.DefaultDesktopOnly);
}
break;
case EdtTestType.PowerBoot:
{
result = PowerBoot(pluginData);
}
break;
case EdtTestType.OperationReliability:
{
result = OperationReliability(pluginData);
}
break;
case EdtTestType.FIM:
{
result = FirmwareUpgrade(pluginData);
}
break;
}
switch (result)
{
case DialogResult.No:
DialogResult showFaultEventHandler = MessageBox.Show(@"Do you wish to enter a Fault Event?", @"Fault Event Handler", MessageBoxButtons.YesNo, MessageBoxIcon.Question, MessageBoxDefaultButton.Button1, MessageBoxOptions.DefaultDesktopOnly);
if (showFaultEventHandler == DialogResult.Yes)
{
FaultHandler eventHandler = new FaultHandler(executionData);
eventHandler.ShowDialog();
}
return(new PluginExecutionResult(PluginResult.Failed, pluginData.AlertMessage));
case DialogResult.Yes:
return(new PluginExecutionResult(PluginResult.Passed, pluginData.AlertMessage));
default:
return(new PluginExecutionResult(PluginResult.Skipped, pluginData.AlertMessage));
}
}
private DialogResult PowerBoot(EdtInterventionActivityData pluginData)
{
BootMethod bootMethod = EnumUtil.Parse <BootMethod>(pluginData.TestMethod);
//first let's prompt the user what we need to do for shutting down
switch (bootMethod)
{
case BootMethod.Dirty:
MessageBox.Show(
@"Please remove the power cable to perform a dirty power shutdown, Press OK to continue.", @"EDT PowerBoot - Shut Down", MessageBoxButtons.OK, MessageBoxIcon.Information, MessageBoxDefaultButton.Button1, MessageBoxOptions.DefaultDesktopOnly);
break;
case BootMethod.Hard:
MessageBox.Show(@"Press and Hold the power button until the device shuts down. Press OK to continue.", @"EDT PowerBoot - Shut Down", MessageBoxButtons.OK, MessageBoxIcon.Information, MessageBoxDefaultButton.Button1, MessageBoxOptions.DefaultDesktopOnly);
break;
case BootMethod.Soft:
MessageBox.Show(
@"Press the power button once to initiate a shutdown of the device. Press OK to continue.", @"EDT PowerBoot - Shut Down", MessageBoxButtons.OK, MessageBoxIcon.Information, MessageBoxDefaultButton.Button1, MessageBoxOptions.DefaultDesktopOnly);
break;
}
var log = new ActivityExecutionDetailLog(_executionData, "PowerBootMethod", bootMethod.GetDescription());
ExecutionServices.DataLogger.Submit(log);
UpdateStatus($"Device has been shutdown by {bootMethod.GetDescription()} method.");
UpdateStatus("Waiting for 30 seconds before continuing...");
//let's wait 30 seconds to continue
Thread.Sleep(TimeSpan.FromSeconds(30));
MessageBox.Show(@"Please reboot the device now", @"EDT PowerBoot - Reboot", MessageBoxButtons.OK,
MessageBoxIcon.Information, MessageBoxDefaultButton.Button1, MessageBoxOptions.DefaultDesktopOnly);
log = new ActivityExecutionDetailLog(_executionData, "PowerBootStart", "Device Reboot Start");
ExecutionServices.DataLogger.Submit(log);
UpdateStatus("Device has been Powered up.");
DateTime startTime = DateTime.UtcNow;
var result = MessageBox.Show(@"Please wait until the device has booted and reached Ready state. Press Yes for successful boot or No for a failure.",
@"EDT PowerBoot - Ready State", MessageBoxButtons.YesNo, MessageBoxIcon.Question, MessageBoxDefaultButton.Button1, MessageBoxOptions.DefaultDesktopOnly);
if (result == DialogResult.Yes)
{
log = new ActivityExecutionDetailLog(_executionData, "PowerBootEnd", "Device Reboot End");
ExecutionServices.DataLogger.Submit(log);
UpdateStatus($"Device has reached Ready State. It took {(DateTime.UtcNow - startTime).TotalSeconds} seconds for Device to boot up.");
}
return(result);
}
/// <summary>
/// Initializes the Control for the Existing MetaData
/// </summary>
/// <param name="configuration"></param>
/// <param name="environment"></param>
public void Initialize(PluginConfigurationData configuration, PluginEnvironment environment)
{
_pluginData = configuration.GetMetadata <EdtInterventionActivityData>();
if (!string.IsNullOrEmpty(_pluginData.AlertMessage))
{
AlertTextBox.Text = _pluginData.AlertMessage;
}
edtTestType_comboBox.SelectedIndex = edtTestType_comboBox.Items.IndexOf(_pluginData.TestType.ToString());
if (!string.IsNullOrEmpty(_pluginData.TestMethod))
{
testMethod_comboBox.SelectedIndex = testMethod_comboBox.Items.IndexOf(_pluginData.TestMethod);
}
if (!string.IsNullOrEmpty(_pluginData.WakeMethod))
{
wakeMethod_comboBox.SelectedIndex = wakeMethod_comboBox.Items.IndexOf(_pluginData.WakeMethod);
}
}
private DialogResult FirmwareUpgrade(EdtInterventionActivityData pluginData)
{
var log = new ActivityExecutionDetailLog(_executionData, "FirmwareFlashMethod", "Web Jet Admin");
ExecutionServices.DataLogger.Submit(log);
log = new ActivityExecutionDetailLog(_executionData, "FirmwareFlashUpgrade", "true");
ExecutionServices.DataLogger.Submit(log);
MessageBox.Show(
@"Use WJA, and begin the firmware upgrade for the device with the target firmware file. Press OK once the firmware upgrade has started.", @"EDT FIM", MessageBoxButtons.OK,
MessageBoxIcon.Information, MessageBoxDefaultButton.Button1, MessageBoxOptions.DefaultDesktopOnly);
log = new ActivityExecutionDetailLog(_executionData, "FirmwareUpdateBegin", "WJA", DateTimeOffset.Now);
ExecutionServices.DataLogger.Submit(log);
var result =
MessageBox.Show(
@"Wait for the firmware upgrade process to complete, Press Yes to continue once the device is in Ready state.",
@"EDT FIM", MessageBoxButtons.YesNo, MessageBoxIcon.Information, MessageBoxDefaultButton.Button1, MessageBoxOptions.DefaultDesktopOnly);
log = new ActivityExecutionDetailLog(_executionData, "FirmwareUpdateEnd", "WJA", DateTimeOffset.Now);
ExecutionServices.DataLogger.Submit(log);
return(result);
}
/// <summary>
/// Initialize the Control for new MetaData
/// </summary>
/// <param name="environment"></param>
public void Initialize(PluginEnvironment environment)
{
_pluginData = new EdtInterventionActivityData();
}