public static int MeasMode(uint ascanNum, uint ascanPort, DGateType type, MeasMode mode)
{
int error_code;
int gateNum = (int)type;
uint attr = DaqAttrType.dGate[gateNum].MeasMode;
uint val = (uint)mode;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
if (type < gateTypeMin || type > gateTypeMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set measurement mode of double gate failed！", "错误：设置门的测量模式失败！");
}
return(error_code);
}
public static int TolMonitorSc(uint ascanNum, uint ascanPort, DGateType type, uint tolMonitorSc)
{
int error_code;
int gateNum = (int)type;
uint attr = DaqAttrType.dGate[gateNum].TolMonitorSc;
uint val = tolMonitorSc;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
if (type < gateTypeMin || type > gateTypeMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set tolerance monitor suppresser count of double gate failed！", "错误：设置门的容限误差计数失败！");
}
return(error_code);
}
public static int AlarmLevel(uint ascanNum, uint ascanPort, DGateType type, GateAlarmLevel level)
{
int error_code;
int gateNum = (int)type;
uint attr = DaqAttrType.dGate[gateNum].AlarmLevel;
uint val = 0;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
if (type < gateTypeMin || type > gateTypeMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set alarm level of double gate failed！", "错误：设置门的报警等级失败！");
}
level = (GateAlarmLevel)val;
return(error_code);
}
/**gate measment mode, pls see MeasMode Enum for part of list*/
public static int MeasMode(uint ascanNum, uint ascanPort, GateType type, MeasMode mode)
{
int error_code;
int gateNum = (int)type;
uint attr = DaqAttrType.gate[gateNum].MeasMode;
uint val = (uint)mode;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
if (type < gateTypeMin || type > gateTypeMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set the Gate measment mode failed!", "错误:设置Gate measment mode失败!");
}
return(error_code);
}
public static int AlarmActive(uint ascanNum, uint ascanPort, DGateType type, GateAlarmActive active)
{
int error_code;
int gateNum = (int)type;
uint attr = DaqAttrType.dGate[gateNum].AlarmActive;
uint val = (uint)active;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
if (type < gateTypeMin || type > gateTypeMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Get alarm active of double gate failed！", "错误：获得门的报警使能失败！");
}
return(error_code);
}
////public static int AlarmTimeLength(uint ascanNum, uint ascanPort, GateType type, ref GateAlarmSignalLength len)
//{
// int error_code;
// int gateNum = (int)type;
// uint attr = DaqAttrType.gate[gateNum].AlarmActive;
// uint val = (uint)len;
// if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
// {
// error_code = -1;
// return error_code;
// }
// if (type < gateTypeMin || type > gateTypeMax)
// {
// error_code = -1;
// return error_code;
// }
// error_code = DAQ.daqGet(ascanNum, ascanPort, attr, ref val);
// if (error_code != (int)PDAQ_ERR.GOOD)
// {
// MessageShow.show("Error:Get the Gate alarm signal length failed!", "错误:获取Gate alarm signal length失败!");
// }
// return error_code;
//}
public static int AlarmActiveLevel(uint ascanNum, uint ascanPort, GateType type, GateAlarmLevel level)
{
int error_code;
int gateNum = (int)type;
uint attr = DaqAttrType.gate[gateNum].AlarmActiveLevel;
uint val = (uint)level;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
if (type < gateTypeMin || type > gateTypeMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set alarm active level failed!", "错误:设置Alarm active level失败!");
}
return(error_code);
}
//需要确定
//public static int AlarmMode(uint ascanNum, uint ascanPort, GateType type, GateAlarmActive active)
//{
// int error_code;
// int gateNum = (int)type;
// uint attr = DaqAttrType.dGate[gateNum].AlarmActive;
// uint val = 0;
// if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
// {
// error_code = -1;
// return error_code;
// }
// if (type < gateTypeMin || type > gateTypeMax)
// {
// error_code = -1;
// return error_code;
// }
// error_code = DAQ.daqSet(ascanNum, ascanPort, attr, ref val);
// if (error_code != (int)PDAQ_ERR.GOOD)
// {
// MessageShow.show("Error:Get alarm active double gate failed！", "错误：获得门的报警使能失败！");
// }
// active = (GateAlarmActive)val;
// return error_code;
//}
public static int AlarmSignalLength(uint ascanNum, uint ascanPort, DGateType type, GateAlarmSignalLength length)
{
int error_code;
int gateNum = (int)type;
uint attr = DaqAttrType.dGate[gateNum].AlarmSignalLength;
uint val = (uint)length;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
if (type < gateTypeMin || type > gateTypeMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set alarm singal length of double gate failed！", "错误：设置门的报警信号长度失败！");
}
return(error_code);
}
/**TM suppress counter(TMSc)*/
public static int TolMonitorSc(uint ascanNum, uint ascanPort, GateType type, uint cnt)
{
int error_code;
int gateNum = (int)type;
uint attr = DaqAttrType.gate[gateNum].TolMonitorSc;
uint val = cnt;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
if (type < gateTypeMin || type > gateTypeMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set Tolerance Monitor Suppress Counter failed!", "错误:设置Tolerance Monitor Suppress Counter失败!");
}
return(error_code);
}
public static int Threshold(uint ascanNum, uint ascanPort, GateType type, double threshold)
{
int error_code;
int gateNum = (int)type;
uint attr = DaqAttrType.gate[gateNum].Threshold;
double val = threshold;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
if (type < gateTypeMin || type > gateTypeMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set the Threshold of gate failed", "错误：设置门的高度失败");
}
return(error_code);
}
public static int AlarmSignalLength(uint ascanNum, uint ascanPort, GateType type, GateAlarmSignalLength len)
{
int error_code;
int gateNum = (int)type;
uint attr = DaqAttrType.gate[gateNum].AlarmSignalLength;
uint val = (uint)len;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
if (type < gateTypeMin || type > gateTypeMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set the Gate alarm signal length failed!", "错误:设置Gate alarm signal length失败!");
}
return(error_code);
}
public static int DtsStep(uint ascanNum, uint ascanPort, GateType type, double step)
{
int error_code;
int gateNum = (int)type;
uint attr = DaqAttrType.gate[gateNum].DtsStep;
double val = step;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
if (type < gateTypeMin || type > gateTypeMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set the dts Step failed!", "错误:设置BTS step失败!");
}
return(error_code);
}
/**get dynamic threld suppression (dts) active*/
public static int DtsActive(uint ascanNum, uint ascanPort, GateType type, DTSActive active)
{
int error_code;
int gateNum = (int)type;
uint attr = DaqAttrType.gate[gateNum].DtsActive;
uint val = (uint)active;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
if (type < gateTypeMin || type > gateTypeMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set Dts Active failed!", "错误:设置Dts Active失败!");
}
return(error_code);
}
public static int Delay(uint ascanNum, uint ascanPort, GateType type, double delay)
{
int error_code;
int gateNum = (int)type;
uint attr = DaqAttrType.gate[gateNum].Delay;
double val = delay;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
if (type < gateTypeMin || type > gateTypeMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set the Delay of gate failed", "错误：设置门的起始位置失败");
return(error_code);
}
setDelayDictionary(ascanNum, ascanPort, type, val);
return(error_code);
}
public static int PeriodTimes(uint ascanNum, uint chn, uint num)
{
int error_code;
uint attr = DaqAttrType.pA.SeqPeriodTimes;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, chn, attr, num);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set Seq Period Times failed", "错误：设置Seq Period Times失败");
}
return(error_code);
}
public static int BeamFile(uint ascanNum, uint chn, StructBeamFile structBeam)
{
int error_code;
uint attr = DaqAttrType.pA.BeamFormerFile;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, chn, attr, structBeam);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set Beam File failed", "错误：设置Beam File失败");
}
return(error_code);
}
public static int Mode(uint ascanNum, uint ascanPort, DACMode mode)
{
int error_code;
uint attr = DaqAttrType.dac.Mode;
uint val = (uint)mode;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set DAC mode failed", "错误：设置DAC mode失败");
}
return(error_code);
}
public static int RunMode(uint ascanNum, uint ascanPort, RunMode runMode)
{
int error_code;
uint attr = DaqAttrType.globalCtrl.RunMode;
uint val = (uint)runMode;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set run mode failed", "错误：设置运行模式失败");
}
return(error_code);
}
public static int Range(uint ascanNum, uint ascanPort, double range)
{
int error_code;
uint attr = DaqAttrType.ascanVideo.Range;
double val = range;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set Ascan range failed", "错误：设置Ascan range失败");
}
return(error_code);
}
public static int AnalogHPF(uint ascanNum, uint ascanPort, FilterCutoffFreq freq)
{
int error_code;
uint attr = DaqAttrType.receiver.AnalogHPF;
uint val = (uint)freq;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set Filter cut off frequency failed!", "错误：设置截止频率失败!");
}
return(error_code);
}
public static int RecieverPATH(uint ascanNum, uint ascanPort, ReceiverPATH receiverPATH)
{
int error_code;
uint attr = DaqAttrType.receiver.ReceiverPATH;
uint val = (uint)receiverPATH;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set reciever PATH failed!", "错误：设置reciever PATH失败!");
}
return(error_code);
}
public static int Point(uint ascanNum, uint ascanPort, uint point)
{
int error_code;
uint attr = DaqAttrType.dac.Point;
uint val = point;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set DAC point failed", "错误：设置DAC point失败");
}
return(error_code);
}
public static int DampingValue(uint ascanNum, uint ascanPort, uint dampingValue)
{
int error_code;
uint attr = DaqAttrType.receiver.DampingValue;
uint val = (uint)dampingValue;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set damping value failed!", "错误：设置damping value失败!");
}
return(error_code);
}
public static int DACFile(uint ascanNum, uint ascanPort, DACParas dacParas)
{
int error_code;
uint attr = DaqAttrType.dac.File;
DACParas val = dacParas;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set DAC file failed", "错误：设置DAC file失败");
}
return(error_code);
}
private static int DetectionWaveMode(uint ascanNum, uint ascanPort, AscanWaveDectionMode mode)
{
int error_code;
uint attr = DaqAttrType.ascanVideo.DetectionWaveMode;
uint val = (uint)mode;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set the Detection wave mode of Asacn failed", "错误：设置A扫的检波失败");
}
return(error_code);
}
public static int Active(uint ascanNum, uint ascanPort, ReceiverActive active)
{
int error_code;
uint attr = DaqAttrType.receiver.Active;
uint val = (uint)active;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set reciviever active failed!", "错误：设置reciviever active失败!");
}
return(error_code);
}
public static int Longitudinal(uint ascanNum, uint ascanPort, double longitudinal)
{
int error_code;
uint attr = DaqAttrType.matVelocity.Longitudinal;
double val = longitudinal;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set Material longitudinal velocity failed", "错误：设置材料纵波声速失败");
}
return(error_code);
}
public static int AnalogGain(uint ascanNum, uint ascanPort, double gain)
{
int error_code;
uint attr = DaqAttrType.receiver.AnalogGain;
double val = gain;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set analog gain failed!", "错误：设置analog gain失败!");
}
return(error_code);
}
public static int Transverse(uint ascanNum, uint ascanPort, double transverse)
{
int error_code;
uint attr = DaqAttrType.matVelocity.Transverse;
double val = transverse;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set Material transverse velocity failed", "错误：设置材料横波声速失败");
}
return(error_code);
}
public static int DigitalLPF(uint ascanNum, uint ascanPort, FilterCutoffFreq digitalLPF)
{
int error_code;
uint attr = DaqAttrType.receiver.DigitalLPF;
uint val = (uint)digitalLPF;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set digital low pass filter failed!", "错误：设置digital low pass filter失败!");
}
return(error_code);
}
public static int IFActive(uint ascanNum, uint ascanPort, AscanIFActive active)
{
int error_code;
uint attr = DaqAttrType.ascanVideo.IFActive;
uint val = (uint)active;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set Ascan if active failed", "错误：设置Ascan if active失败");
}
return(error_code);
}