//需要确定
//public static int AlarmMode(uint ascanNum, uint ascanPort, GateType type, GateAlarmActive active)
//{
// int error_code;
// int gateNum = (int)type;
// uint attr = DaqAttrType.dGate[gateNum].AlarmActive;
// uint val = 0;
// if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
// {
// error_code = -1;
// return error_code;
// }
// if (type < gateTypeMin || type > gateTypeMax)
// {
// error_code = -1;
// return error_code;
// }
// error_code = DAQ.daqSet(ascanNum, ascanPort, attr, ref val);
// if (error_code != (int)PDAQ_ERR.GOOD)
// {
// MessageShow.show("Error:Get alarm active double gate failed！", "错误：获得门的报警使能失败！");
// }
// active = (GateAlarmActive)val;
// return error_code;
//}
public static int AlarmSignalLength(uint ascanNum, uint ascanPort, DGateType type, GateAlarmSignalLength length)
{
int error_code;
int gateNum = (int)type;
uint attr = DaqAttrType.dGate[gateNum].AlarmSignalLength;
uint val = (uint)length;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
if (type < gateTypeMin || type > gateTypeMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set alarm singal length of double gate failed！", "错误：设置门的报警信号长度失败！");
}
return(error_code);
}
public static int AlarmActive(uint ascanNum, uint ascanPort, DGateType type, GateAlarmActive active)
{
int error_code;
int gateNum = (int)type;
uint attr = DaqAttrType.dGate[gateNum].AlarmActive;
uint val = (uint)active;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
if (type < gateTypeMin || type > gateTypeMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Get alarm active of double gate failed！", "错误：获得门的报警使能失败！");
}
return(error_code);
}
public static int TolMonitorActive(uint ascanNum, uint ascanPort, DGateType type, TMActive active)
{
int error_code;
int gateNum = (int)type;
uint attr = DaqAttrType.dGate[gateNum].TolMonitorActive;
uint val = (uint)active;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
if (type < gateTypeMin || type > gateTypeMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set tolerance monitor active of double gate failed！", "错误：设置门的容限误差使能失败！");
}
return(error_code);
}
public static int TolMonitorSc(uint ascanNum, uint ascanPort, DGateType type, ref uint tolMonitorSc)
{
int error_code;
int gateNum = (int)type;
uint attr = DaqAttrType.dGate[gateNum].TolMonitorSc;
uint val = 0;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
if (type < gateTypeMin || type > gateTypeMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqGet(ascanNum, ascanPort, attr, ref val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Get tolerance monitor suppresser count of double gate failed！", "错误：获得门的容限误差计数失败！");
}
tolMonitorSc = val;
return(error_code);
}
public static int MeasActive(uint ascanNum, uint ascanPort, DGateType type, MeasActive active)
{
int error_code;
int gateNum = (int)type;
uint attr = DaqAttrType.dGate[gateNum].MeasActive;
uint val = 0;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
if (type < gateTypeMin || type > gateTypeMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqGet(ascanNum, ascanPort, attr, ref val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Get measurement active of double gate failed！", "错误：获得门的测量使能失败！");
}
active = (MeasActive)val;
return(error_code);
}
public static int MeasMode(uint ascanNum, uint ascanPort, DGateType type, MeasMode mode)
{
int error_code;
int gateNum = (int)type;
uint attr = DaqAttrType.dGate[gateNum].MeasMode;
uint val = (uint)mode;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
if (type < gateTypeMin || type > gateTypeMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set measurement mode of double gate failed！", "错误：设置门的测量模式失败！");
}
return(error_code);
}
public static int AlarmLevel(uint ascanNum, uint ascanPort, DGateType type, GateAlarmLevel level)
{
int error_code;
int gateNum = (int)type;
uint attr = DaqAttrType.dGate[gateNum].AlarmLevel;
uint val = 0;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
if (type < gateTypeMin || type > gateTypeMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set alarm level of double gate failed！", "错误：设置门的报警等级失败！");
}
level = (GateAlarmLevel)val;
return(error_code);
}
public void getHardInfo()
{
int error_code;
uint cla_num = 0;
uint slt_num = 0;
error_code = DAQ.daqGet((uint)index, (uint)port, (uint)AttrbuteType.DAQ_ATTR_PCI_CLASSIC_NUMBER, ref cla_num);
if (error_code == 0)
{
classicNum = cla_num;
}
else
{
classicNum = 0;
}
error_code = DAQ.daqGet((uint)index, (uint)port, (uint)AttrbuteType.DAQ_ATTR_PCI_SLOT_NUMBER, ref slt_num);
if (error_code == 0)
{
slotNum = slt_num;
}
else
{
slotNum = 0;
}
if (assignedName == null)
{
assignedName = cla_num.ToString() + "-" + slotNum.ToString();
}
}
public static int daqRead(uint index, ref UniSetPacket setPacket)
{
int error_code;
const uint DOBLOCK = 1;
error_code = DAQ.USCOMM_Read(index, ref setPacket, DOBLOCK);
return(error_code);
}
public static int BeamFile(uint ascanNum, uint chn, StructBeamFile structBeam)
{
int error_code;
uint attr = DaqAttrType.pA.BeamFormerFile;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, chn, attr, structBeam);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set Beam File failed", "错误：设置Beam File失败");
}
return(error_code);
}
public static int PeriodTimes(uint ascanNum, uint chn, uint num)
{
int error_code;
uint attr = DaqAttrType.pA.SeqPeriodTimes;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, chn, attr, num);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set Seq Period Times failed", "错误：设置Seq Period Times失败");
}
return(error_code);
}
public static int Active(uint ascanNum, uint ascanPort, ReceiverActive active)
{
int error_code;
uint attr = DaqAttrType.receiver.Active;
uint val = (uint)active;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set reciviever active failed!", "错误：设置reciviever active失败!");
}
return(error_code);
}
public static int DampingValue(uint ascanNum, uint ascanPort, uint dampingValue)
{
int error_code;
uint attr = DaqAttrType.receiver.DampingValue;
uint val = (uint)dampingValue;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set damping value failed!", "错误：设置damping value失败!");
}
return(error_code);
}
public static int DACFile(uint ascanNum, uint ascanPort, DACParas dacParas)
{
int error_code;
uint attr = DaqAttrType.dac.File;
DACParas val = dacParas;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set DAC file failed", "错误：设置DAC file失败");
}
return(error_code);
}
public static int RecieverPATH(uint ascanNum, uint ascanPort, ReceiverPATH receiverPATH)
{
int error_code;
uint attr = DaqAttrType.receiver.ReceiverPATH;
uint val = (uint)receiverPATH;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set reciever PATH failed!", "错误：设置reciever PATH失败!");
}
return(error_code);
}
public static int Mode(uint ascanNum, uint ascanPort, DACMode mode)
{
int error_code;
uint attr = DaqAttrType.dac.Mode;
uint val = (uint)mode;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set DAC mode failed", "错误：设置DAC mode失败");
}
return(error_code);
}
public static int Point(uint ascanNum, uint ascanPort, uint point)
{
int error_code;
uint attr = DaqAttrType.dac.Point;
uint val = point;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set DAC point failed", "错误：设置DAC point失败");
}
return(error_code);
}
public static int DigitalLPF(uint ascanNum, uint ascanPort, FilterCutoffFreq digitalLPF)
{
int error_code;
uint attr = DaqAttrType.receiver.DigitalLPF;
uint val = (uint)digitalLPF;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set digital low pass filter failed!", "错误：设置digital low pass filter失败!");
}
return(error_code);
}
public static int Length(uint ascanNum, uint ascanPort, AscanVideoLength length)
{
int error_code;
uint attr = DaqAttrType.ascanVideo.Length;
uint val = (uint)length;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set Ascan video length failed", "错误：设置Ascan video length失败");
}
return(error_code);
}
public static int Transverse(uint ascanNum, uint ascanPort, double transverse)
{
int error_code;
uint attr = DaqAttrType.matVelocity.Transverse;
double val = transverse;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set Material transverse velocity failed", "错误：设置材料横波声速失败");
}
return(error_code);
}
public static int AnalogGain(uint ascanNum, uint ascanPort, double gain)
{
int error_code;
uint attr = DaqAttrType.receiver.AnalogGain;
double val = gain;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set analog gain failed!", "错误：设置analog gain失败!");
}
return(error_code);
}
public static int Intensity(uint ascanNum, uint ascanPort, double intensity)
{
int error_code;
uint attr = DaqAttrType.pulserTranmit.Intensity;
double val = intensity;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set Pulser transmit reciviever intensity failed", "错误：设置Pulser transmit reciviever intensity失败");
}
return(error_code);
}
private static int DetectionWaveMode(uint ascanNum, uint ascanPort, AscanWaveDectionMode mode)
{
int error_code;
uint attr = DaqAttrType.ascanVideo.DetectionWaveMode;
uint val = (uint)mode;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set the Detection wave mode of Asacn failed", "错误：设置A扫的检波失败");
}
return(error_code);
}
public static int Range(uint ascanNum, uint ascanPort, double range)
{
int error_code;
uint attr = DaqAttrType.ascanVideo.Range;
double val = range;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set Ascan range failed", "错误：设置Ascan range失败");
}
return(error_code);
}
public static int IFActive(uint ascanNum, uint ascanPort, AscanIFActive active)
{
int error_code;
uint attr = DaqAttrType.ascanVideo.IFActive;
uint val = (uint)active;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set Ascan if active failed", "错误：设置Ascan if active失败");
}
return(error_code);
}
public static int EnvlopDecayFactor(uint ascanNum, uint ascanPort, uint speed)
{
int error_code;
uint attr = DaqAttrType.ascanVideo.EnvlopDecayFactor;
uint val = speed;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set Envlop Decay Factor failed！", "错误：设置包络速度失败！");
}
return(error_code);
}
public static int AnalogHPF(uint ascanNum, uint ascanPort, FilterCutoffFreq freq)
{
int error_code;
uint attr = DaqAttrType.receiver.AnalogHPF;
uint val = (uint)freq;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set Filter cut off frequency failed!", "错误：设置截止频率失败!");
}
return(error_code);
}
public static int RunMode(uint ascanNum, uint ascanPort, RunMode runMode)
{
int error_code;
uint attr = DaqAttrType.globalCtrl.RunMode;
uint val = (uint)runMode;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set run mode failed", "错误：设置运行模式失败");
}
return(error_code);
}
public static int Longitudinal(uint ascanNum, uint ascanPort, double longitudinal)
{
int error_code;
uint attr = DaqAttrType.matVelocity.Longitudinal;
double val = longitudinal;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set Material longitudinal velocity failed", "错误：设置材料纵波声速失败");
}
return(error_code);
}
public static int DampingActive(uint ascanNum, uint ascanPort, PulserDampingActive active)
{
int error_code;
uint attr = DaqAttrType.pulserTranmit.DampingActive;
uint val = (uint)active;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set Pulser transmit reciviever damping active failed", "错误：设置Pulser transmit reciviever damping active失败");
}
return(error_code);
}