static void Main(string[] args)
{
string basepath = Directory.GetCurrentDirectory();
Directory.CreateDirectory(Path.Combine(basepath, "outline"));
Directory.CreateDirectory(Path.Combine(basepath, "frame"));
GerberFrameWriter.FrameSettings FS = new GerberFrameWriter.FrameSettings();
PolyLine PL = new PolyLine();
FS.FrameTitle = "Test Frame";
FS.RenderSample = false;
FS.margin = 3;
PL.MakeRoundedRect(new PointD(10, 10), new PointD(200, 200), 7);
FS.PositionAround(PL);
//FS.offset = new PointD(200, 200);
FS.RenderSample = true;
GerberArtWriter GAW = new GerberArtWriter();
GAW.AddPolyLine(PL);
GAW.Write("outline/outtestinside.gko");
GerberFrameWriter.WriteSideEdgeFrame(PL, FS, "frame/outtest");
GerberFrameWriter.MergeFrameIntoGerberSet(Path.Combine(basepath, "frame"), Path.Combine(basepath, "outline"), Path.Combine(basepath, "mergedoutput"), FS, new FrameCreatorTest(), "testframe");
GerberFrameWriter.MergeFrameIntoGerberSet(Path.Combine(basepath, "SliceFrameOutline6"), Path.Combine(basepath, "Slice6"), Path.Combine(basepath, "slice6inframe"), FS, new FrameCreatorTest(), "slice6framed");
// PNL.SaveOutlineTo("panelized.gko", "panelcombinedgko.gko");
}
static void Main(string[] args)
{
string basepath = Directory.GetCurrentDirectory();
Directory.CreateDirectory(Path.Combine(basepath, "outline"));
Directory.CreateDirectory(Path.Combine(basepath, "frame"));
Directory.CreateDirectory(Path.Combine(basepath, "imagetest"));
GerberFrameWriter.FrameSettings FS = new GerberFrameWriter.FrameSettings();
PolyLine PL = new PolyLine();
FS.FrameTitle = "Test Frame";
FS.RenderSample = false;
FS.margin = 3;
PL.MakeRoundedRect(new PointD(-50, -50), new PointD(50, 50), 7);
//FS.offset = new PointD(200, 200);
FS.RenderSample = false;
GerberArtWriter GAW = new GerberArtWriter();
GAW.AddPolyLine(PL);
GAW.Write("outline/outtestinside.gko");
// Bitmap FrontPrint = (Bitmap)Bitmap.FromFile("BigJigImage.png");
// Bounds FrontBound = new Bounds() { BottomRight = new PointD(220, 230), TopLeft = new PointD(-220, -230) , Valid = true};
// PCBWriterSet s = new PCBWriterSet();
// s.TopSilk.WriteImageToBounds(FrontPrint, FrontBound, new Bounds() { TopLeft = new PointD(-10, -10), BottomRight = new PointD(10, 10),Valid = true });
// s.Write("imagetest", "test!");
FS.RenderDirectionArrow = true;
FS.DirectionArrowSide = GerberLibrary.Core.BoardSide.Bottom;
FS.DefaultFiducials = true;
FS.FiducialSide = BoardSide.Both;
FS.HorizontalTabs = true;
FS.VerticalTabs = true;
FS.InsideEdgeMode = GerberFrameWriter.FrameSettings.InsideMode.FormFitting;
FS.PositionAround(PL);
BOM OutFiducials = new BOM();
GerberFrameWriter.WriteSideEdgeFrame(PL, FS, Path.Combine(basepath, "frame/outtest"), OutFiducials);
FS.RenderSample = true;
GerberFrameWriter.MergeFrameIntoGerberSet(Path.Combine(basepath, "frame"), Path.Combine(basepath, "outline"), Path.Combine(basepath, "mergedoutput"), FS, new FrameCreatorTest(), "testframe");
// GerberFrameWriter.MergeFrameIntoGerberSet(Path.Combine(basepath, "SliceFrameOutline6"), Path.Combine(basepath, "Slice6"), Path.Combine(basepath, "slice6inframe"), FS, new FrameCreatorTest(),"slice6framed" );
// PNL.SaveOutlineTo("panelized.gko", "panelcombinedgko.gko");
//Console.ReadKey();
}
static void Main(string[] args)
{
string basepath = Directory.GetCurrentDirectory();
Directory.CreateDirectory(Path.Combine(basepath, "outline"));
Directory.CreateDirectory(Path.Combine(basepath, "frame"));
Directory.CreateDirectory(Path.Combine(basepath, "imagetest"));
GerberFrameWriter.FrameSettings FS = new GerberFrameWriter.FrameSettings();
PolyLine PL = new PolyLine();
FS.FrameTitle = "Test Frame";
FS.RenderSample = false;
FS.margin = 3;
PL.MakeRoundedRect(new PointD(10, 10), new PointD(400, 300), 7);
FS.PositionAround(PL);
//FS.offset = new PointD(200, 200);
FS.RenderSample = true;
GerberArtWriter GAW = new GerberArtWriter();
GAW.AddPolyLine(PL);
GAW.Write("outline/outtestinside.gko");
Bitmap FrontPrint = (Bitmap)Bitmap.FromFile("BigJigImage.png");
Bounds FrontBound = new Bounds()
{
BottomRight = new PointD(220, 230), TopLeft = new PointD(-220, -230), Valid = true
};
PCBWriterSet s = new PCBWriterSet();
s.TopSilk.WriteImageToBounds(FrontPrint, FrontBound, new Bounds()
{
TopLeft = new PointD(-10, -10), BottomRight = new PointD(10, 10), Valid = true
});
s.Write("imagetest", "test!");
// GerberFrameWriter.WriteSideEdgeFrame(PL, FS, "frame/outtest");
// GerberFrameWriter.MergeFrameIntoGerberSet(Path.Combine(basepath, "frame"), Path.Combine(basepath, "outline"), Path.Combine(basepath, "mergedoutput"),FS, new FrameCreatorTest(),"testframe");
// GerberFrameWriter.MergeFrameIntoGerberSet(Path.Combine(basepath, "SliceFrameOutline6"), Path.Combine(basepath, "Slice6"), Path.Combine(basepath, "slice6inframe"), FS, new FrameCreatorTest(),"slice6framed" );
// PNL.SaveOutlineTo("panelized.gko", "panelcombinedgko.gko");
}
private void button1_Click(object sender, EventArgs e)
{
if (saveFileDialog1.ShowDialog() == DialogResult.OK)
{
int polyid = 0;
string fname = System.IO.Path.GetFileName(saveFileDialog1.FileName);
string fnamenoext = System.IO.Path.GetFileNameWithoutExtension(saveFileDialog1.FileName);
string OutName = "";
if (fname.Length != fnamenoext.Length)
{
int extlen = fname.Length - fnamenoext.Length;
OutName = saveFileDialog1.FileName.Substring(0, saveFileDialog1.FileName.Length - extlen);
}
else
{
OutName = saveFileDialog1.FileName;
}
List <string> Files = new List <string>();
double W = (double)innerWidth.Value;
double H = (double)innerHeight.Value;
double TE = (double)topEdge.Value;
double LE = (double)leftEdge.Value;
double OuterWidth = W + LE * 2.0;
double OuterHeight = H + TE * 2.0;
double InnerWidth = W;
double InnerHeight = H;
GerberArtWriter Outline = new GerberArtWriter();
GerberArtWriter TopSilk = new GerberArtWriter();
GerberArtWriter TopCopper = new GerberArtWriter();
GerberArtWriter TopSolderMask = new GerberArtWriter();
GerberArtWriter BottomSilk = new GerberArtWriter();
GerberArtWriter BottomCopper = new GerberArtWriter();
GerberArtWriter BottomSolderMask = new GerberArtWriter();
List <PointD> DrillHoles = new List <PointD>();
double mountholediameter = (double)holeDiameter.Value;
if (addHolesCheck.Checked)
{
double side = LE / 2.0;
double top = TE / 2.0;
DrillHoles.Add(new PointD(side, top));
DrillHoles.Add(new PointD(OuterWidth - side, top));
DrillHoles.Add(new PointD(OuterWidth - side, OuterHeight - top));
DrillHoles.Add(new PointD(side, OuterHeight - top));
ExcellonFile EF = new ExcellonFile();
ExcellonTool MountHoleDrill = new ExcellonTool();
MountHoleDrill.Radius = mountholediameter / 2.0;
foreach (var a in DrillHoles)
{
MountHoleDrill.Drills.Add(a);
}
EF.Tools[10] = MountHoleDrill;
EF.Write(OutName + ".txt", 0, 0, 0, 0);
Files.Add(OutName + ".txt");
}
// board outline
PolyLine PL = new PolyLine(polyid++);
PL.MakeRoundedRect(new PointD(0, 0), new PointD(OuterWidth, OuterHeight), (double)roundedOuterCorners.Value);
Outline.AddPolyLine(PL, 0);
PolyLine PL2 = new PolyLine(polyid++);
PL2.MakeRoundedRect(new PointD(LE, TE), new PointD(InnerWidth + LE, InnerHeight + TE), (double)roundedInnerCorners.Value);
Outline.AddPolyLine(PL2, 0);
#region fiducials
List <PointD> Fiducials = new List <PointD>();
foreach (DataGridViewRow dataRow in fiducialsListData.Rows)
{
PointD fiducialPoint = new PointD();
if (dataRow.Cells != null && dataRow.Cells["XCoordinate"].Value != null && dataRow.Cells["YCoordinate"].Value != null)
{
fiducialPoint.X = double.Parse(dataRow.Cells["XCoordinate"].Value.ToString());
fiducialPoint.Y = double.Parse(dataRow.Cells["YCoordinate"].Value.ToString());
if (string.Equals(dataRow.Cells["fiducialLayer"].Value.ToString(), "Top"))
{
TopCopper.AddFlash(fiducialPoint, double.Parse(dataRow.Cells["fiducialCopperDiameter"].Value.ToString()) / 2.0);
TopSolderMask.AddFlash(fiducialPoint, double.Parse(dataRow.Cells["fiducialSolderMaskDiam"].Value.ToString()) / 2.0);
}
else
{
BottomCopper.AddFlash(fiducialPoint, double.Parse(dataRow.Cells["fiducialCopperDiameter"].Value.ToString()) / 2.0);
BottomSolderMask.AddFlash(fiducialPoint, double.Parse(dataRow.Cells["fiducialSolderMaskDiam"].Value.ToString()) / 2.0);
}
}
}
#endregion
string FrameTitle = FrameTitleBox.Text;
if (FrameTitle.Length > 0)
{
FontSet FS = FontSet.Load("Font.xml");
TopSilk.DrawString(new PointD(OuterWidth / 2.0, OuterHeight - TE / 4.0), FS, FrameTitle + " - top", TE / 4.0, 0.1, StringAlign.CenterCenter);
TopCopper.DrawString(new PointD(OuterWidth / 2.0, OuterHeight - TE / 4.0), FS, FrameTitle + " - top", TE / 4.0, 0.1, StringAlign.CenterCenter);
BottomSilk.DrawString(new PointD(OuterWidth / 2.0, OuterHeight - TE / 4.0), FS, FrameTitle + " - bottom", TE / 4.0, 0.1, StringAlign.CenterCenter, true);
BottomCopper.DrawString(new PointD(OuterWidth / 2.0, OuterHeight - TE / 4.0), FS, FrameTitle + " - bottom", TE / 4.0, 0.1, StringAlign.CenterCenter, true);
}
foreach (var a in DrillHoles)
{
TopSolderMask.AddFlash(a, mountholediameter / 2.0 + 1.0);
BottomSolderMask.AddFlash(a, mountholediameter / 2.0 + 1.0);
}
Outline.Write(OutName + ".gko");
TopSilk.Write(OutName + ".gto");
TopCopper.Write(OutName + ".gtl");
TopSolderMask.Write(OutName + ".gts");
BottomSilk.Write(OutName + ".gbo");
BottomCopper.Write(OutName + ".gbl");
BottomSolderMask.Write(OutName + ".gbs");
Files.Add(OutName + ".gko");
Files.Add(OutName + ".gto");
Files.Add(OutName + ".gtl");
Files.Add(OutName + ".gts");
Files.Add(OutName + ".gbo");
Files.Add(OutName + ".gbl");
Files.Add(OutName + ".gbs");
GerberImageCreator GIC = new GerberImageCreator();
GIC.AddBoardsToSet(Files, new StandardConsoleLog());
GIC.WriteImageFiles(OutName, 50);
// Gerber.SaveGerberFileToImage(OutName + ".gko", OutName + ".gko.png", 200, Color.Black, Color.White);
// Gerber.SaveGerberFileToImage(OutName + ".gto", OutName + ".gto.png", 200, Color.Black, Color.White);
}
}
public static List <string> WriteSideEdgeFrame(PolyLine pl, FrameSettings FS, string basefile, bool insideedge = true)
{
List <string> Files = new List <string>();
try
{
int polyid = 0;
string fname = System.IO.Path.GetFileName(basefile);
string fnamenoext = System.IO.Path.GetFileNameWithoutExtension(basefile);
string OutName = Path.Combine(System.IO.Path.GetDirectoryName(basefile), fnamenoext);
Console.WriteLine("writing frame files to {0}", OutName);
Bounds B = new Bounds();
B.AddPolyLine(pl);
// FS.innerHeight = B.Height();
// FS.innerWidth = B.Width();
double W = (double)FS.innerWidth;
double H = (double)FS.innerHeight;
double TE = (double)FS.topEdge;
double LE = (double)FS.leftEdge;
double OuterWidth = W + LE * 2.0;
double OuterHeight = H + TE * 2.0;
double InnerWidth = W;
double InnerHeight = H;
PCBWriterSet PCB = new PCBWriterSet();
double mountholediameter = (double)FS.holeDiameter;
// board outline
PolyLine PL = new PolyLine(polyid++);
PL.MakeRoundedRect(new PointD(0, 0), new PointD(OuterWidth, OuterHeight), (double)FS.roundedOuterCorners);
PCB.AddOutline(PL);
if (insideedge)
{
PolyLine PL2 = new PolyLine(polyid++);
PL2.MakeRoundedRect(new PointD(LE, TE), new PointD(InnerWidth + LE, InnerHeight + TE), (double)FS.roundedInnerCorners);
PCB.AddOutline(PL2);
}
#region fiducials
List <PointD> Fiducials = new List <PointD>();
foreach (var P in FS.fiducialsListData)
{
PointD fiducialPoint = P.pos;
PCB.Fiducial(fiducialPoint, P.CopperDiameter, P.MaskDiameter, P.Top);
}
#endregion
string FrameTitle = FS.FrameTitle;
string FrameTopTitle = FrameTitle + " - Top";
string FrameBottomTitle = FrameTitle + " - Bottom";
double verticaltitleclearance = 0;
double horizontaltitleclearance = 0;
if (FrameTitle.Length > 0)
{
FontSet fnt = FontSet.Load("Font.xml");
horizontaltitleclearance = fnt.StringWidth(FrameBottomTitle, TE / 4) + mountholediameter * 2 + FS.topEdge;
verticaltitleclearance = fnt.StringWidth(FrameBottomTitle, TE / 4) + mountholediameter * 2 + FS.topEdge;
PCB.Label(fnt, new PointD(OuterWidth / 2.0, OuterHeight - TE / 4.0), FrameTopTitle, TE / 4, StringAlign.CenterCenter, 0.1, true, true, 0);
PCB.Label(fnt, new PointD(OuterWidth - LE / 4, OuterHeight / 2), FrameTopTitle, TE / 4.0, StringAlign.CenterCenter, 0.1, true, true, -90);
PCB.Label(fnt, new PointD(LE / 4, OuterHeight / 2), FrameTopTitle, TE / 4.0, StringAlign.CenterCenter, 0.1, true, true, 90);
PCB.Label(fnt, new PointD(OuterWidth / 2.0, TE - TE / 4.0), FrameTopTitle, TE / 4.0, StringAlign.CenterCenter, 0.1, true, true, 0);
PCB.Label(fnt, new PointD(OuterWidth / 2.0, OuterHeight - TE / 4.0), FrameBottomTitle, TE / 4, StringAlign.CenterCenter, 0.1, true, true, 0, true, true, true);
PCB.Label(fnt, new PointD(OuterWidth - LE / 4, OuterHeight / 2), FrameBottomTitle, TE / 4.0, StringAlign.CenterCenter, 0.1, true, true, -90, true);
PCB.Label(fnt, new PointD(LE / 4, OuterHeight / 2), FrameBottomTitle, TE / 4.0, StringAlign.CenterCenter, 0.1, true, true, 90, true);
PCB.Label(fnt, new PointD(OuterWidth / 2.0, TE - TE / 4.0), FrameBottomTitle, TE / 4.0, StringAlign.CenterCenter, 0.1, true, true, 0, true);
}
if (FS.addHoles)
{
double side = LE / 2.0;
double top = TE / 2.0;
PCB.Drill(new PointD(side, top), mountholediameter, 1);
PCB.Drill(new PointD(OuterWidth - side, top), mountholediameter, 1);
PCB.Drill(new PointD(OuterWidth - side, OuterHeight - top), mountholediameter, 1);
PCB.Drill(new PointD(side, OuterHeight - top), mountholediameter, 1);
double dx = (OuterWidth - side) - side;
double dy = (OuterHeight - top) - top;
dx -= horizontaltitleclearance;
dy -= verticaltitleclearance;
dx /= 2;
dy /= 2;
int horiz = (int)Math.Ceiling((dx / 2) / FS.MaxMountHoleSpacingMM);
int vert = (int)Math.Ceiling((dy / 2) / FS.MaxMountHoleSpacingMM);
dx /= (float)horiz;
dy /= (float)vert;
if (dx < FS.MinMountHoleSpacingMM)
{
horiz = 0;
}
if (dy < FS.MinMountHoleSpacingMM)
{
vert = 0;
}
for (int i = 1; i <= horiz; i++)
{
PCB.Drill(new PointD(side + (dx) * i, top), mountholediameter, 1);
PCB.Drill(new PointD((OuterWidth - side) - (dx) * i, top), mountholediameter, 1);
PCB.Drill(new PointD(side + (dx) * i, OuterHeight - top), mountholediameter, 1);
PCB.Drill(new PointD((OuterWidth - side) - (dx) * i, OuterHeight - top), mountholediameter, 1);
}
for (int i = 1; i <= vert; i++)
{
PCB.Drill(new PointD(side, top + (dy) * i), mountholediameter, 1);
PCB.Drill(new PointD(side, (OuterHeight - top) - (dy) * i), mountholediameter, 1);
PCB.Drill(new PointD((OuterWidth - side), top + (dy) * i), mountholediameter, 1);
PCB.Drill(new PointD((OuterWidth - side), (OuterHeight - top) - (dy) * i), mountholediameter, 1);
}
}
PolyLine Left = new PolyLine();
PolyLine Right = new PolyLine();
PolyLine Top = new PolyLine();
PolyLine Bottom = new PolyLine();
Top.MakePRectangle(OuterWidth + 1, FS.topEdge + 1, -1, -1);
Bottom.MakePRectangle(OuterWidth, FS.topEdge, 0, OuterHeight - FS.topEdge);
Left.MakePRectangle(FS.leftEdge + 1, OuterHeight + 1, -1, -1);
Right.MakePRectangle(FS.leftEdge, OuterHeight, OuterWidth - FS.leftEdge, 0);
PCB.ArtInclusions.Add(Left);
PCB.ArtInclusions.Add(Right);
PCB.ArtInclusions.Add(Top);
PCB.ArtInclusions.Add(Bottom);
//PCB.CellularArt();
Files.AddRange(PCB.Write(Path.GetDirectoryName(basefile), Path.GetFileNameWithoutExtension(basefile), FS.offset));;
if (FS.RenderSample)
{
GerberImageCreator GIC = new GerberImageCreator();
GIC.AddBoardsToSet(Files, new SilentLog());
GIC.WriteImageFiles(OutName, 200, true, false, true, null);
}
}
catch (Exception e)
{
Console.Write(" Exception while making frames:{0}", e.Message);
}
foreach (var s in Files)
{
Console.WriteLine("Writen edge file {0} succesfully", s);
}
return(Files);
}
private void button1_Click(object sender, EventArgs e)
{
if (saveFileDialog1.ShowDialog() == DialogResult.OK)
{
string fname = System.IO.Path.GetFileName(saveFileDialog1.FileName);
string fnamenoext = System.IO.Path.GetFileNameWithoutExtension(saveFileDialog1.FileName);
string OutName = "";
if (fname.Length != fnamenoext.Length)
{
int extlen = fname.Length - fnamenoext.Length;
OutName = saveFileDialog1.FileName.Substring(0, saveFileDialog1.FileName.Length - extlen);
}
else
{
OutName = saveFileDialog1.FileName;
}
List <string> Files = new List <string>();
double W = (double)innerWidth.Value;
double H = (double)innerHeight.Value;
double TE = (double)topEdge.Value;
double LE = (double)leftEdge.Value;
double OuterWidth = W + LE * 2.0;
double OuterHeight = H + TE * 2.0;
double InnerWidth = W;
double InnerHeight = H;
GerberArtWriter Outline = new GerberArtWriter();
GerberArtWriter TopSilk = new GerberArtWriter();
GerberArtWriter TopCopper = new GerberArtWriter();
GerberArtWriter TopSolderMask = new GerberArtWriter();
GerberArtWriter BottomSilk = new GerberArtWriter();
GerberArtWriter BottomCopper = new GerberArtWriter();
GerberArtWriter BottomSolderMask = new GerberArtWriter();
List <PointD> DrillHoles = new List <PointD>();
double mountholediameter = (double)holeDiameter.Value;
if (addHolesCheck.Checked)
{
double side = LE / 2.0;
double top = TE / 2.0;
DrillHoles.Add(new PointD(side, top));
DrillHoles.Add(new PointD(OuterWidth - side, top));
DrillHoles.Add(new PointD(OuterWidth - side, OuterHeight - top));
DrillHoles.Add(new PointD(side, OuterHeight - top));
ExcellonFile EF = new ExcellonFile();
ExcellonTool MountHoleDrill = new ExcellonTool();
MountHoleDrill.Radius = mountholediameter / 2.0;
foreach (var a in DrillHoles)
{
MountHoleDrill.Drills.Add(a);
}
EF.Tools[10] = MountHoleDrill;
EF.Write(OutName + ".txt", 0, 0, 0, 0);
Files.Add(OutName + ".txt");
}
PolyLine PL = new PolyLine();
PL.MakeRoundedRect(new PointD(0, 0), new PointD(OuterWidth, OuterHeight), (double)roundedOuterCorners.Value);
Outline.AddPolyLine(PL, 0);
PolyLine PL2 = new PolyLine();
PL2.MakeRoundedRect(new PointD(LE, TE), new PointD(InnerWidth + LE, InnerHeight + TE), (double)roundedInnerCorners.Value);
Outline.AddPolyLine(PL2, 0);
if (fiducials.Checked)
{
List <PointD> Fiducials = new List <PointD>();
Fiducials.Add(new PointD(LE * 2.0, TE / 2.0));
Fiducials.Add(new PointD(OuterWidth - LE * 2.0, TE / 2.0));
Fiducials.Add(new PointD(OuterWidth - LE * 2.0, OuterHeight - TE / 2.0));
Fiducials.Add(new PointD(LE * 2.0, OuterHeight - TE / 2.0));
Fiducials.Add(new PointD(OuterWidth / 2, TE / 2.0)); //generate extra non symetric fiducial
foreach (var A in Fiducials)
{
TopCopper.AddFlash(A, 1.0);
TopSolderMask.AddFlash(A, 3.0);
}
}
string FrameTitle = FrameTitleBox.Text;
if (FrameTitle.Length > 0)
{
FontSet FS = FontSet.Load("Font.xml");
TopSilk.DrawString(new PointD(OuterWidth / 2.0, OuterHeight - TE / 4.0), FS, FrameTitle + " - top", TE / 4.0, 0.1, StringAlign.CenterCenter);
TopCopper.DrawString(new PointD(OuterWidth / 2.0, OuterHeight - TE / 4.0), FS, FrameTitle + " - top", TE / 4.0, 0.1, StringAlign.CenterCenter);
BottomSilk.DrawString(new PointD(OuterWidth / 2.0, OuterHeight - TE / 4.0), FS, FrameTitle + " - bottom", TE / 4.0, 0.1, StringAlign.CenterCenter, true);
BottomCopper.DrawString(new PointD(OuterWidth / 2.0, OuterHeight - TE / 4.0), FS, FrameTitle + " - bottom", TE / 4.0, 0.1, StringAlign.CenterCenter, true);
}
foreach (var a in DrillHoles)
{
TopSolderMask.AddFlash(a, mountholediameter / 2.0 + 1.0);
BottomSolderMask.AddFlash(a, mountholediameter / 2.0 + 1.0);
}
Outline.Write(OutName + ".gko");
TopSilk.Write(OutName + ".gto");
TopCopper.Write(OutName + ".gtl");
TopSolderMask.Write(OutName + ".gts");
BottomSilk.Write(OutName + ".gbo");
BottomCopper.Write(OutName + ".gbl");
BottomSolderMask.Write(OutName + ".gbs");
Files.Add(OutName + ".gko");
Files.Add(OutName + ".gto");
Files.Add(OutName + ".gtl");
Files.Add(OutName + ".gts");
Files.Add(OutName + ".gbo");
Files.Add(OutName + ".gbl");
Files.Add(OutName + ".gbs");
GerberImageCreator GIC = new GerberImageCreator();
GIC.AddBoardsToSet(Files);
GIC.WriteImageFiles(OutName, 50);
// Gerber.SaveGerberFileToImage(OutName + ".gko", OutName + ".gko.png", 200, Color.Black, Color.White);
// Gerber.SaveGerberFileToImage(OutName + ".gto", OutName + ".gto.png", 200, Color.Black, Color.White);
}
}
