private void NestParamForm_Load(object sender, EventArgs e)
{
// the border margin of the material.
topTextBox.Text = m_nestParam.GetMatTopMargin().ToString("0.000");
bottomTextBox.Text = m_nestParam.GetMatBottomMargin().ToString("0.000");
leftTextBox.Text = m_nestParam.GetMatLeftMargin().ToString("0.000");
rightTextBox.Text = m_nestParam.GetMatRightMargin().ToString("0.000");
marginTextBox.Text = m_nestParam.GetMatMargin().ToString("0.000");
// the part spacing.
spaceTextBox.Text = m_nestParam.GetPartDis().ToString("0.000");
// the start nesting corner.
if (m_nestParam.GetStartCorner() == RECT_CORNER_EX.LEFT_TOP)
{
ltRadioBtn.Checked = true;
}
else if (m_nestParam.GetStartCorner() == RECT_CORNER_EX.LEFT_BOTTOM)
{
lbRadioBtn.Checked = true;
}
else if (m_nestParam.GetStartCorner() == RECT_CORNER_EX.RIGHT_TOP)
{
rtRadioBtn.Checked = true;
}
else if (m_nestParam.GetStartCorner() == RECT_CORNER_EX.RIGHT_BOTTOM)
{
rbRadioBtn.Checked = true;
}
// the nesting direction.
if (m_nestParam.GetNestDir() == NEST_DIRECTION_EX.NEST_DIR_X)
{
xRadioBtn.Checked = true;
}
else if (m_nestParam.GetNestDir() == NEST_DIRECTION_EX.NEST_DIR_Y)
{
yRadioBtn.Checked = true;
}
lstConfig = GetConfig();
int iCount = 1;
foreach (var cfg in lstConfig)
{
ListViewItem item = lvConfigList.Items.Add(iCount.ToString());
// part name column.
item.SubItems.Add(cfg.ConfigName);
item.Tag = cfg;
iCount++;
}
}
private void QrCodeForm_Load(object sender, EventArgs e)
{
int v = 0;
int vv = 0;
int vvv = 0;
Pen blackPen = new Pen(Color.Black, 1);
Pen blackPen2 = new Pen(Color.Black, 2);
SolidBrush blackBrush = new SolidBrush(Color.Black);
HatchBrush hatchBrush = new HatchBrush(HatchStyle.BackwardDiagonal, Color.Black, Color.White);
//外边距
int space = 2;
for (int length = 0; length < shtListView.Items.Count; length++)
{
SLTQrCodeItem SLTQrCodeItemTemp = new SLTQrCodeItem()
{
SLTBmpShadowList = new List <SLTShadowBmp>()
};
ListViewItem item = shtListView.Items[length];
long iSheetID = (long)item.Tag;
SheetEx sheet = m_sheetList.GetSheetByID(iSheetID);
string M_Name = sheet.GetMat().GetName();
PartPmtListEx partPmtList = sheet.GetPartPmtList();
int partsCount = partPmtList.GetPartList().Size();
Rect2DEx sheetRec = sheet.GetMat().GetBoundaryRect();
int MatWidth = (int)sheetRec.GetWidth();
int MatHeight = (int)sheetRec.GetHeight();
SLTQrCodeItemTemp.BlankBmp = new Bitmap(MatWidth + 1, MatHeight + 1);
Graphics gBlank = Graphics.FromImage(SLTQrCodeItemTemp.BlankBmp);
gBlank.Clear(Color.FromArgb(255, 255, 255, 255));
//边框
gBlank.DrawRectangle(blackPen, 0, 0, MatWidth, MatHeight);
//缩略图
for (int i = 0; i < partsCount; i++)
{
SLTShadowBmp SLTShadowBmpItem = new SLTShadowBmp();
PartPmtEx partPmt = sheet.GetPartTopItemList().GetPartPmtByIndex(i).GetPartPmt();
Rect2DEx partRe2 = partPmt.GetRectBox();
Matrix2DEx Matrix = partPmt.GetMatrix();
int PartWidth = (int)partRe2.GetWidth();
int PartHeight = (int)partRe2.GetHeight();
int PoX = (int)Matrix.GetMatVal(2, 0);
int PoY = (int)Matrix.GetMatVal(2, 1);
int Angle = (int)(Math.Asin(Matrix.GetMatVal(0, 1)) * 180 / Math.PI);
SLTShadowBmpItem.SLTPartInfos = new SLTPartShape()
{
PoX = m_nestParam.GetNestDir() == NEST_DIRECTION_EX.NEST_DIR_X ? PoX : PoX - PartWidth,
PoY = MatHeight - PoY - PartHeight,
PartWidth = PartWidth,
PartHeight = PartHeight,
NestDir = m_nestParam.GetNestDir() == NEST_DIRECTION_EX.NEST_DIR_X ? "X" : "Y",
MatName = M_Name,
};
SLTQrCodeItemTemp.SLTBmpShadowList.Add(SLTShadowBmpItem);
gBlank.DrawRectangle(blackPen, SLTShadowBmpItem.SLTPartInfos.PoX, SLTShadowBmpItem.SLTPartInfos.PoY, PartWidth, PartHeight);
}
gBlank.Dispose();
//加阴影缩略图
for (int i = 0; i < SLTQrCodeItemTemp.SLTBmpShadowList.Count; i++)
{
Bitmap original = SLTQrCodeItemTemp.BlankBmp;
Bitmap copy = new Bitmap(original.Width, original.Height);
SLTShadowBmp Shapeitem = SLTQrCodeItemTemp.SLTBmpShadowList[i];
using (Graphics gTemp = Graphics.FromImage(copy))
{
gTemp.Clear(Color.White);
Rectangle imageRectangle = new Rectangle(0, 0, copy.Width, copy.Height);
gTemp.DrawImage(original, imageRectangle, imageRectangle, GraphicsUnit.Pixel);
gTemp.FillRectangle(hatchBrush, Shapeitem.SLTPartInfos.PoX,
Shapeitem.SLTPartInfos.PoY, Shapeitem.SLTPartInfos.PartWidth, Shapeitem.SLTPartInfos.PartHeight);
gTemp.DrawRectangle(blackPen2, Shapeitem.SLTPartInfos.PoX,
Shapeitem.SLTPartInfos.PoY, Shapeitem.SLTPartInfos.PartWidth, Shapeitem.SLTPartInfos.PartHeight);//画矩形
}
SLTQrCodeItemTemp.SLTBmpShadowList[i].ShadowBmp = copy;
PartEx partEx = partPmtList.GetPartList().GetPartByIndex(i);
string OrderNo = OrderManagerDal.Instance.GetOrder(partEx.GetID());
string partNameIndex = partEx.GetName().Substring(1, 1);
string partName = partEx.GetName();
SLTQrCodeItemTemp.SLTBmpShadowList[i].QrCodeText = OrderNo + "-" + partNameIndex;
SLTQrCodeItemTemp.SLTBmpShadowList[i].QrCodeBmp = GenerateQRCode(partNameIndex);
//字体
Font font = new Font("微软雅黑", 60f);//8号
//设定字体格式
StringFormat format = new StringFormat()
{
Alignment = StringAlignment.Center,
LineAlignment = StringAlignment.Center,
};
string text1 = OrderNo + "-" + partNameIndex;
string text2 = partName;
string text3 = Shapeitem.SLTPartInfos.PartWidth + "*" + Shapeitem.SLTPartInfos.PartHeight;
string text4 = Shapeitem.SLTPartInfos.MatName;
SLTQrCodeItemTemp.SLTBmpShadowList[i].SLTText = text1 + "\r\n" + text2 + "\r\n" + text3 + "\r\n" + text4;
Size SLTTextSize = TextRenderer.MeasureText(SLTQrCodeItemTemp.SLTBmpShadowList[i].SLTText, font);
Bitmap textBmp = new Bitmap(SLTTextSize.Width + space + 5, SLTTextSize.Width + space + 5);
using (Graphics gTextTemp = Graphics.FromImage(textBmp))
{
gTextTemp.Clear(Color.White);
gTextTemp.SmoothingMode = SmoothingMode.HighQuality;
gTextTemp.DrawString(SLTQrCodeItemTemp.SLTBmpShadowList[i].SLTText, font, blackBrush,
new RectangleF(space, (textBmp.Height - SLTTextSize.Height - (2 * space)) / 2 + space, textBmp.Width - space, textBmp.Height - space));
}
SLTQrCodeItemTemp.SLTBmpShadowList[i].SLTTextBmp = textBmp;
}
_SLTQrCodeList.Add(SLTQrCodeItemTemp);
//g.DrawString(partName, font, blackBrush, new RectangleF(0, 0, 100, 100), format);
//g.DrawImage(qrBmp, 150, 150, 50, 50);
}
//
int bmpPrintWidth = 500;
int Colunm = 2;
List <Shape> positionBase = new List <Shape>();
int count = 0;
for (int i = 0; i < _SLTQrCodeList.Count; i++)
{
for (int j = 0; j < _SLTQrCodeList[i].SLTBmpShadowList.Count; j++)
{
count++;
}
}
for (int i = 0; i < count; i++)
{
for (int j = 0; j < Colunm; j++)
{
if (i * j + j >= count)
{
break;
}
Shape itemTemp = new Shape()
{
PoX = j * (bmpPrintWidth / Colunm),
PoY = i * (bmpPrintWidth / Colunm),
PartWidth = bmpPrintWidth / Colunm,
PartHeight = bmpPrintWidth / Colunm,
};
positionBase.Add(itemTemp);
}
}
int bmpPrintHeight = ((positionBase.Count / Colunm) + (positionBase.Count % Colunm)) * (bmpPrintWidth / Colunm);
Bitmap PrintBmp = new Bitmap(bmpPrintWidth, bmpPrintHeight);
using (Graphics gPrint = Graphics.FromImage(PrintBmp))
{
gPrint.Clear(Color.White);
count = 0;
for (int i = 0; i < _SLTQrCodeList.Count; i++)
{
for (int j = 0; j < _SLTQrCodeList[i].SLTBmpShadowList.Count; j++)
{
float TextPx = positionBase[count].PoX;
float TextPy = positionBase[count].PoY + positionBase[count].PartHeight * 0.1f;
float QrCodePx = TextPx;
float QrCodePy = positionBase[count].PoY + positionBase[count].PartHeight * 0.5f;
float SLTPx = positionBase[count].PoX + positionBase[count].PartWidth * 0.4f;
float SLTPy = positionBase[count].PoY;
Size SLTSize = _SLTQrCodeList[i].SLTBmpShadowList[j].ShadowBmp.Size;
float SLTWidth = (int)(positionBase[count].PartHeight * SLTSize.Width / SLTSize.Height);
float SLTHeight = (int)(positionBase[count].PartHeight);
Bitmap SLTBmpTemp = _SLTQrCodeList[i].SLTBmpShadowList[j].ShadowBmp;
float scale = (float)SLTSize.Width / (float)SLTSize.Height;
if (scale < 0.6f)//固定高度
{
SLTWidth = (int)(positionBase[count].PartHeight * SLTSize.Width / SLTSize.Height);
SLTHeight = positionBase[count].PartHeight;
}
else if (0.6f < scale && scale < 1)//固定宽度
{
SLTWidth = positionBase[count].PartWidth * 0.6f;
SLTHeight = (int)(positionBase[count].PartWidth * 0.6f * SLTSize.Height / SLTSize.Width);
}
else if (scale > 1)//旋转
{
SLTWidth = positionBase[count].PartWidth * 0.6f;
SLTHeight = (int)(positionBase[count].PartWidth * 0.6f * SLTSize.Height / SLTSize.Width);
//SLTBmpTemp = new Bitmap(SLTSize.Width, SLTSize.Height);
//using (Graphics gCcopy = Graphics.FromImage(SLTBmpTemp))
//{
// gCcopy.Clear(Color.White);
// gCcopy.TranslateTransform(0, 0); //源点移动到旋转中心
// gCcopy.RotateTransform(90f); //旋转
// Rectangle imageRectangle = new Rectangle(0, 0, SLTSize.Width, SLTSize.Height);
// gCcopy.DrawImage(_SLTQrCodeList[i].SLTBmpShadowList[j].ShadowBmp, imageRectangle, imageRectangle, GraphicsUnit.Pixel);
//}
//scale = SLTSize.Height / SLTSize.Width;
//if (0.6f < scale && scale < 1)//固定高度
//{
// SLTWidth = (int)(positionBase[count].PartHeight * SLTSize.Width / SLTSize.Height);
// SLTHeight = positionBase[count].PartHeight;
//}
//else if (0.6f < scale && scale < 1)//固定宽度
//{
// SLTWidth = positionBase[count].PartWidth * 0.6f;
// SLTHeight = (int)(positionBase[count].PartWidth * 0.6f * SLTSize.Height / SLTSize.Width);
//}
}
//else//固定高度
//{
// SLTWidth = (int)(positionBase[count].PartHeight * SLTSize.Width / SLTSize.Height);
// SLTHeight = positionBase[count].PartHeight;
//}
gPrint.DrawImage(_SLTQrCodeList[i].SLTBmpShadowList[j].SLTTextBmp,
TextPx, TextPy,
(int)(positionBase[count].PartWidth * 0.4),
(int)(positionBase[count].PartHeight * 0.4));
gPrint.DrawImage(_SLTQrCodeList[i].SLTBmpShadowList[j].QrCodeBmp,
QrCodePx, QrCodePy,
(int)(positionBase[count].PartWidth * 0.4),
(int)(positionBase[count].PartHeight * 0.4));
gPrint.DrawImage(SLTBmpTemp, SLTPx, SLTPy, SLTWidth, SLTHeight);
count++;
}
}
}
panelQrCodePrint.BackgroundImage = PrintBmp;
panelQrCodePrint.BackgroundImageLayout = ImageLayout.Stretch;
for (int i = 0; i < _SLTQrCodeList.Count; i++)
{
for (int j = 0; j < _SLTQrCodeList[i].SLTBmpShadowList.Count; j++)
{
cbShadowBmp.Items.Add(_SLTQrCodeList[i].SLTBmpShadowList[j].QrCodeText);
}
}
}
static private void SaveNestParam(XmlDocument xmlDoc, XmlNode paramNode, NestParamEx nestParam, int iNestingTime)
{
// MatLeftMargin.
{
XmlElement node = xmlDoc.CreateElement("MatLeftMargin");
node.InnerText = nestParam.GetMatLeftMargin().ToString("0.0000000");
paramNode.AppendChild(node);
}
// MatRightMargin.
{
XmlElement node = xmlDoc.CreateElement("MatRightMargin");
node.InnerText = nestParam.GetMatRightMargin().ToString("0.0000000");
paramNode.AppendChild(node);
}
// MatTopMargin.
{
XmlElement node = xmlDoc.CreateElement("MatTopMargin");
node.InnerText = nestParam.GetMatTopMargin().ToString("0.0000000");
paramNode.AppendChild(node);
}
// MatBottomMargin.
{
XmlElement node = xmlDoc.CreateElement("MatBottomMargin");
node.InnerText = nestParam.GetMatBottomMargin().ToString("0.0000000");
paramNode.AppendChild(node);
}
// MatMargin.
{
XmlElement node = xmlDoc.CreateElement("MatMargin");
node.InnerText = nestParam.GetMatMargin().ToString("0.0000000");
paramNode.AppendChild(node);
}
// PartDis.
{
XmlElement node = xmlDoc.CreateElement("PartDis");
node.InnerText = nestParam.GetPartDis().ToString("0.0000000");
paramNode.AppendChild(node);
}
// ConTol.
{
XmlElement node = xmlDoc.CreateElement("ConTol");
node.InnerText = nestParam.GetConTol().ToString("0.0000000");
paramNode.AppendChild(node);
}
// PartRotStep.
{
XmlElement node = xmlDoc.CreateElement("PartRotStep");
node.InnerText = nestParam.GetPartRotStep().ToString("0.0000000");
paramNode.AppendChild(node);
}
// StartCorner.
{
XmlElement node = xmlDoc.CreateElement("StartCorner");
node.InnerText = ((int)nestParam.GetStartCorner()).ToString();
paramNode.AppendChild(node);
}
// NestDir.
{
XmlElement node = xmlDoc.CreateElement("NestDir");
node.InnerText = ((int)nestParam.GetNestDir()).ToString();
paramNode.AppendChild(node);
}
// PartInPart.
{
XmlElement node = xmlDoc.CreateElement("PartInPart");
if (nestParam.IsPartInPart())
{
node.InnerText = "1";
}
else
{
node.InnerText = "0";
}
paramNode.AppendChild(node);
}
// EvalFactor.
{
XmlElement node = xmlDoc.CreateElement("EvalFactor");
node.InnerText = nestParam.GetEvalFactor().ToString();
paramNode.AppendChild(node);
}
// nest time.
{
XmlElement node = xmlDoc.CreateElement("NestingTime");
node.InnerText = iNestingTime.ToString();
paramNode.AppendChild(node);
}
}