private void AdvParamForm_Load(object sender, EventArgs e)
{
tolTextBox.Text = m_nestParam.GetConTol().ToString("0.000");
rotTextBox.Text = m_nestParam.GetPartRotStep().ToString("0.000");
evalTextBox.Text = m_nestParam.GetEvalFactor().ToString();
timeTextBox.Text = m_iNestingTime.ToString();
if (m_nestParam.IsPartInPart())
{
partInPartCheckBox.Checked = true;
}
else
{
partInPartCheckBox.Checked = false;
}
if (m_nestParam.EnableOptimization())
{
optimizationCheckBox.Checked = true;
}
else
{
optimizationCheckBox.Checked = false;
}
GetConfigHigh();
}
// calc the utilization of the material.
static public double CalcMatUtil(SheetListEx sheetList, NestParamEx nestParam)
{
double dUtilization = .0;
// calculate the utilization of material.
double dMatArea = .0, dNestedArea = .0;
for (int i = 0; i < sheetList.Size(); i++)
{
SheetEx sheet = sheetList.GetSheetByIndex(i);
int iSheetCount = sheet.GetCount();
dMatArea += sheet.GetMat().GetArea() * iSheetCount;
// go through each part placement object in the sheet.
PartPmtListEx partPmtList = sheet.GetPartPmtList();
for (int j = 0; j < partPmtList.Size(); j++)
{
PartPmtEx partPmt = partPmtList.GetPartPmtByIndex(j);
PartEx part = partPmt.GetPart();
// the area of the part.
double dPartArea = NestFacadeEx.GetPartArea(part, nestParam.GetConTol());
// part count in the part placement object.
int iPartCount = 1;
if (partPmt.IsGrid())
{
iPartCount = partPmt.GetRowCount() * partPmt.GetColCount();
}
dNestedArea += iSheetCount * iPartCount * dPartArea;
}
}
// figure out the utilization.
if (dMatArea == 0 || dNestedArea == 0)
{
dUtilization = .0;
}
else
{
dUtilization = (dNestedArea / dMatArea) * 100;
}
return(dUtilization);
}
static private void SaveNestParam(XmlDocument xmlDoc, XmlNode paramNode, NestParamEx nestParam, int iNestingTime)
{
// MatLeftMargin.
{
XmlElement node = xmlDoc.CreateElement("MatLeftMargin");
node.InnerText = nestParam.GetMatLeftMargin().ToString("0.0000000");
paramNode.AppendChild(node);
}
// MatRightMargin.
{
XmlElement node = xmlDoc.CreateElement("MatRightMargin");
node.InnerText = nestParam.GetMatRightMargin().ToString("0.0000000");
paramNode.AppendChild(node);
}
// MatTopMargin.
{
XmlElement node = xmlDoc.CreateElement("MatTopMargin");
node.InnerText = nestParam.GetMatTopMargin().ToString("0.0000000");
paramNode.AppendChild(node);
}
// MatBottomMargin.
{
XmlElement node = xmlDoc.CreateElement("MatBottomMargin");
node.InnerText = nestParam.GetMatBottomMargin().ToString("0.0000000");
paramNode.AppendChild(node);
}
// MatMargin.
{
XmlElement node = xmlDoc.CreateElement("MatMargin");
node.InnerText = nestParam.GetMatMargin().ToString("0.0000000");
paramNode.AppendChild(node);
}
// PartDis.
{
XmlElement node = xmlDoc.CreateElement("PartDis");
node.InnerText = nestParam.GetPartDis().ToString("0.0000000");
paramNode.AppendChild(node);
}
// ConTol.
{
XmlElement node = xmlDoc.CreateElement("ConTol");
node.InnerText = nestParam.GetConTol().ToString("0.0000000");
paramNode.AppendChild(node);
}
// PartRotStep.
{
XmlElement node = xmlDoc.CreateElement("PartRotStep");
node.InnerText = nestParam.GetPartRotStep().ToString("0.0000000");
paramNode.AppendChild(node);
}
// StartCorner.
{
XmlElement node = xmlDoc.CreateElement("StartCorner");
node.InnerText = ((int)nestParam.GetStartCorner()).ToString();
paramNode.AppendChild(node);
}
// NestDir.
{
XmlElement node = xmlDoc.CreateElement("NestDir");
node.InnerText = ((int)nestParam.GetNestDir()).ToString();
paramNode.AppendChild(node);
}
// PartInPart.
{
XmlElement node = xmlDoc.CreateElement("PartInPart");
if (nestParam.IsPartInPart())
{
node.InnerText = "1";
}
else
{
node.InnerText = "0";
}
paramNode.AppendChild(node);
}
// EvalFactor.
{
XmlElement node = xmlDoc.CreateElement("EvalFactor");
node.InnerText = nestParam.GetEvalFactor().ToString();
paramNode.AppendChild(node);
}
// nest time.
{
XmlElement node = xmlDoc.CreateElement("NestingTime");
node.InnerText = iNestingTime.ToString();
paramNode.AppendChild(node);
}
}
// load boundary polygon from dxf/dwg file.
static public MatEx LoadMatFromDxfdwg(String strFilePath, NestParamEx nestParam)
{
MatEx mat = null;
/************************************************************************/
// load all geometry items from the dxf/dwg file.
// the file name.
int iDotIndex = strFilePath.LastIndexOf('.');
int iSlashIndex = strFilePath.LastIndexOf('\\');
String strFileName = strFilePath.Substring(iSlashIndex + 1, iDotIndex - iSlashIndex - 1);
// whether the file is dxf file or dwg file.
bool bDwg = true;
String strExt = strFilePath.Substring(iDotIndex, strFilePath.Length - iDotIndex);
strExt = strExt.ToLower();
if (strExt == ".dxf")
{
bDwg = false;
}
else if (strExt == ".dwg")
{
bDwg = true;
}
else
{
return(mat);
}
// extract geometry items from dxf/dwg file.
ImpDataEx impData;
if (!bDwg)
{
impData = NestFacadeEx.ExtractGeomItems(strFilePath);
}
else
{
// the temp folder for dxf.
String strDxfPath = Environment.GetFolderPath(Environment.SpecialFolder.MyDocuments);
strDxfPath += "\\";
strDxfPath += new Random().Next(1, 100000).ToString();
strDxfPath += ".dxf";
// save dxf file in tmp path.
NestFacadeEx.Dwg2Dxf(strFilePath, strDxfPath);
// extract geometry items from dxf file.
impData = NestFacadeEx.ExtractGeomItems(strDxfPath);
// delete the temp file.
File.Delete(strDxfPath);
}
/************************************************************************/
/************************************************************************/
// get the polygons from the dxf/dwg file.
// build the polygons of all the geometry items.
GeomItemListEx geomItemList = impData.GetAllGeomItem();
Poly2DListEx polyList = NestFacadeEx.BuildPolyListFromLineArc(geomItemList, nestParam.GetConTol());
// if no closed polygon found, return.
if (polyList.Size() == 0)
{
MessageBox.Show("No closed boundary found.", "NestProfessor DEMO");
return(mat);
}
// the outer boundary polygon.
int iMaxIndex = polyList.GetMaxAreaPoly();
Polygon2DEx outerPoly = polyList.GetPolygonByIndex(iMaxIndex);
// the hole polygons.
polyList.DelPolygonByIndex(iMaxIndex);
Poly2DListEx holePolyList = polyList;
/************************************************************************/
/************************************************************************/
// build the material object.
// whether the boundary polygon is a rectangle.
bool bRectMat = true;
if (outerPoly.GetPtCount() != 4)
{
bRectMat = false;
}
else if (holePolyList.Size() > 0)
{
bRectMat = false;
}
else
{
// line items in the polygon.
ArrayList lineItems = outerPoly.GetLineList();
LineItemEx lineItem1 = (LineItemEx)lineItems[0];
LineItemEx lineItem2 = (LineItemEx)lineItems[1];
LineItemEx lineItem3 = (LineItemEx)lineItems[2];
LineItemEx lineItem4 = (LineItemEx)lineItems[3];
if (Math.Abs(lineItem1.GetLength() - lineItem3.GetLength()) > 0.0001)
{
bRectMat = false;
}
if (Math.Abs(lineItem2.GetLength() - lineItem4.GetLength()) > 0.0001)
{
bRectMat = false;
}
Vector2DEx vect1 = lineItem1.GetBaseVector();
Vector2DEx vect2 = lineItem2.GetBaseVector();
if (!vect1.OrthogonalTo(vect2))
{
bRectMat = false;
}
}
// build the material object.
if (bRectMat)
{
mat = new RectMatEx(strFileName, outerPoly.GetBoundaryRect(), 1);
}
else
{
PolyMatEx polyMat = new PolyMatEx(strFileName, outerPoly, 1);
polyMat.SetUselessHoleList(holePolyList);
mat = polyMat;
}
/************************************************************************/
return(mat);
}
private void addPartBtn_Click(object sender, EventArgs e)
{
OpenFileDialog openFileDialog = new OpenFileDialog();
openFileDialog.Filter = "DXF Files|*.dxf|DWG Files|*.dwg";
openFileDialog.RestoreDirectory = true;
openFileDialog.FilterIndex = 1;
openFileDialog.Multiselect = true;
if (openFileDialog.ShowDialog() == DialogResult.OK)
{
// disable select-change event.
m_bDisableSelChgEvent = true;
lblLoadPart.Text = "零件加载中……";
Task tk = new Task(new Action(() =>
{
for (int i = 0; i < openFileDialog.FileNames.Length; i++)
{
String strFilePath = openFileDialog.FileNames[i];
//获取文件所在的文件夹名，用做订单号
var view = strFilePath.Split('\\');
var dir = view[view.Length - 2];
// 从Dxf文件中加载零件对象
PartEx part = NestHelper.LoadPartFromDxfdwg(strFilePath, m_impDataList);
// 判断零件是否是闭合的
bool bClosedBoundary = NestFacadeEx.HasClosedBoundary(part, m_nestParam.GetConTol());
if (!bClosedBoundary)
{
MessageBox.Show("零件没有闭合!!!");
continue;
}
// build NestPartEx object.
NestPartEx nestPart = new NestPartEx(part, NestPriorityEx.MaxPriority(), 1, PART_ROT_STYLE_EX.PART_ROT_PID2_INCREMENT, false);
m_nestPartList.AddNestPart(nestPart);
m_partDxfPath.Add(new KeyValuePair <long, string>(nestPart.GetID(), strFilePath));
m_partColorConfig[nestPart.GetPart().GetID()] = ColorTranslator.ToOle(NestHelper.PickNextColor_4_part(ref m_iCurrentColorIndex));
// add part to list control.
this.Invoke(new Action(() =>
{
AddPart_to_listCtrl(nestPart, dir);
}));
}
}));
tk.Start();
tk.ContinueWith(t => this.Invoke(new Action(() => { lblLoadPart.Text = string.Empty; })));
// disable select-change event.
m_bDisableSelChgEvent = false;
// select the last row.
if (partListView.Items.Count > 0)
{
partListView.SelectedItems.Clear();
partListView.Items[partListView.Items.Count - 1].Selected = true;
partListView.Items[partListView.Items.Count - 1].Focused = true;
partListView.Items[partListView.Items.Count - 1].EnsureVisible();
}
}
}