public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Egg Logic");
EditorGUI.BeginChangeCheck();
{
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.HelpBox("Use Baby Dragons or Scale Up the egg", MessageType.None, true);
EditorGUILayout.PropertyField(serializedObject.FindProperty("Dragon"), new GUIContent("Dragon", "the Prefab or Gameobject that contains the little dragon"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("preHatchOffset"), new GUIContent("Pre-Hatch Offset"));
EditorGUILayout.PropertyField(hatchtype, new GUIContent("Hatch Type"));
DragonEgg.HatchType ht = (DragonEgg.HatchType)hatchtype.enumValueIndex;
switch (ht)
{
case DragonEgg.HatchType.None:
EditorGUILayout.HelpBox("Just Call the Method CrackEgg() to activate it", MessageType.Info, true);
break;
case DragonEgg.HatchType.Time:
EditorGUILayout.PropertyField(time, new GUIContent("Time", "ammount of Seconds to Hatch"));
break;
case DragonEgg.HatchType.Input:
EditorGUILayout.PropertyField(input, new GUIContent("Input", "Input assigned in the InputManager to Hatch"));
break;
default:
break;
}
}
EditorGUILayout.EndVertical();
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnEggCrack"), new GUIContent("On Egg Crack", "Invoked When the Egg Crack"));
}
EditorGUILayout.EndVertical();
}
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Dragon Egg Values Changed");
}
serializedObject.ApplyModifiedProperties();
}
// private readonly GUIContent G_DismountMountOnDeath = new GUIContent("Dismount if mount dies", "The Rider will automatically dismount if the Animal Dies");
#endregion
public override void OnInspectorGUI()
{
MalbersEditor.DrawDescription("Riding Logic");
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
MalbersEditor.DrawScript(script);
serializedObject.Update();
Editor_Tabs1.intValue = GUILayout.Toolbar(Editor_Tabs1.intValue, new string[] { "General", "Events", "Advanced", "Debug" });
int Selection = Editor_Tabs1.intValue;
if (Selection == 0)
{
DrawGeneral();
}
else if (Selection == 1)
{
DrawEvents();
}
else if (Selection == 2)
{
DrawAdvanced();
}
else if (Selection == 3)
{
DrawDebug();
}
serializedObject.ApplyModifiedProperties();
EditorGUILayout.EndVertical();
AddMountLayer();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Send Messages to all the MonoBehaviours that uses the Interface |IAnimatorListener| ");
EditorGUI.BeginChangeCheck();
{
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
list.DoLayoutList();
EditorGUILayout.EndVertical();
var UseSendMessage = serializedObject.FindProperty("UseSendMessage");
UseSendMessage.boolValue = EditorGUILayout.ToggleLeft(new GUIContent("Use Send Message", "Uses the SendMessage() instead"), UseSendMessage.boolValue);
var nextFrame = serializedObject.FindProperty("nextFrame");
nextFrame.boolValue = EditorGUILayout.ToggleLeft(new GUIContent("Next Frame", "Send the Message the frame after"), nextFrame.boolValue);
}
EditorGUILayout.EndVertical();
}
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Messages Inspector");
}
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Used for catch when a gameobject enters, stays, or Exit A collider/Trigger");
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(serializedObject.FindProperty("active"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("ignoreTriggers"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("hitLayer"), new GUIContent("Hit Layers", "GameObjects to Ignore with this layers"));
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnTrigger_Enter"), new GUIContent("On Trigger Enter"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnTrigger_Stay"), new GUIContent("On Trigger Stay"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnTrigger_Exit"), new GUIContent("On Trigger Exit"));
}
EditorGUILayout.EndVertical();
}
EditorGUILayout.EndVertical();
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Strafing Logic");
EditorGUI.BeginChangeCheck();
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
MalbersEditor.DrawScript(script);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUILayout.PropertyField(serializedObject.FindProperty("active"), new GUIContent("Active", "Enable Disable the Strafing Logic"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("SType"), new GUIContent("Use", "Use Camera or a Target to Calculate the Strafing"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("MainCamera"), new GUIContent("Main Camera", "Use the Main Camera for the Strafe Logic"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("Target"), new GUIContent("Target", "Use a Target for the Strafe Logic"));
EditorGUILayout.EndVertical();
//EditorGUILayout.BeginVertical(EditorStyles.helpBox);
//EditorGUILayout.PropertyField(serializedObject.FindProperty("Gravity"), new GUIContent("Gravity", "Gravity Direction"));
//EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUILayout.PropertyField(serializedObject.FindProperty("Rotate"), new GUIContent("Rotate", "Add extra rotation while on Strafe Mode"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("SmoothValue"), new GUIContent("SmoothValue", "Smooth Value to the Rotation"));
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUILayout.PropertyField(updateAnimator, new GUIContent("Update Animator", "Update Animator with the Parameter"));
if (M.UpdateAnimator)
{
EditorGUILayout.PropertyField(serializedObject.FindProperty("m_StrafeAngle"), new GUIContent("Param Name", "Name of the Parameter on The Animator for the Strafing"));
}
EditorGUILayout.EndVertical();
EditorGUILayout.EndVertical();
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Strafe Inspector");
// EditorUtility.SetDirty(target);
}
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Reset Scriptable Variables");
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(serializedObject.FindProperty("ResetOnEnable"), new GUIContent("Reset on Enable", "Reset the values when this Script is Enabled"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("ResetOnDisable"), new GUIContent("Reset on Disable", "Reset the values when this Script is Disabled, and when the Play button is Off (in the Editor)"));
Reo_ScriptVars.DoLayoutList();
}
EditorGUILayout.EndVertical();
}
EditorGUILayout.EndVertical();
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Plays the sound matching the physic material on the hit object\nInvoke the method 'PlayMaterialSound'");
EditorGUI.BeginChangeCheck();
{
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUILayout.PropertyField(serializedObject.FindProperty("audioSource"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("DefaultSound"));
EditorGUILayout.EndVertical();
list.DoLayoutList();
if (list.index != -1)
{
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
SerializedProperty Element = soundbymaterial.GetArrayElementAtIndex(list.index);
SerializedProperty SoundElement = Element.FindPropertyRelative("Sounds");
MalbersEditor.Arrays(SoundElement);
}
EditorGUILayout.EndVertical();
}
}
EditorGUILayout.EndVertical();
}
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "SoundByMat Inspector");
}
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("AI Movement Logic for the Animal");
EditorGUI.BeginChangeCheck();
{
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
MalbersEditor.DrawScript(script);
Editor_Tabs1.intValue = GUILayout.Toolbar(Editor_Tabs1.intValue, new string[] { "General", "Events", "Debug" });
int Selection = Editor_Tabs1.intValue;
if (Selection == 0)
{
ShowGeneral();
}
else if (Selection == 1)
{
ShowEvents();
}
else if (Selection == 2)
{
ShowDebug();
}
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Animal AI Control Changed");
}
}
EditorGUILayout.EndVertical();
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Toggle || Swap Meshes");
EditorGUI.BeginChangeCheck();
{
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
{
list.DoLayoutList();
if (showMeshesList.boolValue)
{
if (list.index != -1)
{
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
SerializedProperty Element = activeMeshesList.GetArrayElementAtIndex(list.index);
MalbersEditor.Arrays(Element);
}
EditorGUILayout.EndVertical();
}
}
}
}
EditorGUILayout.EndVertical();
}
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Active Meshes Inspector");
//EditorUtility.SetDirty(target);
}
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("All the selector actions and animations are managed here");
EditorGUI.BeginChangeCheck();
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
M.FocusedItemIndex = EditorGUILayout.IntField(new GUIContent("Focused Item", "Index of the first Item to appear on Focus (Zero Index Based)"), M.FocusedItemIndex);
if (M.FocusedItemIndex == -1)
{
EditorGUILayout.HelpBox("-1 Means no item is selected", MessageType.Info);
}
if (M.FocusedItemIndex < -1)
{
M.FocusedItemIndex = -1;
}
EditorGUILayout.PropertyField(RestoreTime, new GUIContent("Restore Time", "Time to restore the previuous item to his original position"));
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginHorizontal();
{
AnimateSelection.boolValue = GUILayout.Toggle(AnimateSelection.boolValue, new GUIContent("Animate Selection", "Animate the selection between items"), EditorStyles.toolbarButton);
SoloSelection.boolValue = !AnimateSelection.boolValue;
SoloSelection.boolValue = GUILayout.Toggle(SoloSelection.boolValue, new GUIContent("Solo Selection", "Animate the selection between items"), EditorStyles.toolbarButton);
AnimateSelection.boolValue = !SoloSelection.boolValue;
}
EditorGUILayout.EndHorizontal();
if (AnimateSelection.boolValue)
{
EditorGUILayout.BeginVertical(MalbersEditor.StyleGreen);
EditorGUILayout.HelpBox("The Selector Controller will move and rotate to center the selected Item", MessageType.None);
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(SelectionTime, new GUIContent("Selection Time", "Time between the selection among the objects"));
if (SelectionTime.floatValue < 0)
{
SelectionTime.floatValue = 0; //Don't put time below zero;
}
if (SelectionTime.floatValue != 0)
{
EditorGUILayout.PropertyField(SelectionCurve, new GUIContent("Selection Curve", "Timing of the selection animation"));
}
EditorGUILayout.BeginHorizontal();
{
EditorGUILayout.PropertyField(DragSpeed, new GUIContent("Drag Speed", "Swipe speed when swiping :)"));
if (DragSpeed.floatValue != 0)
{
dragHorizontal.boolValue = GUILayout.Toggle(dragHorizontal.boolValue, new GUIContent(dragHorizontal.boolValue ? "Horizontal" : "Vertical", "Drag/Swipe type from the mouse/touchpad "), EditorStyles.popup);
}
}
EditorGUILayout.EndHorizontal();
if (DragSpeed.floatValue == 0)
{
EditorGUILayout.HelpBox("Drag is disabled", MessageType.Info);
}
}
EditorGUILayout.EndVertical();
if (DragSpeed.floatValue != 0)
{
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUILayout.PropertyField(inertia, new GUIContent("Inertia", "Add inertia when Draging is enabled and the mouse is released"));
if (inertia.boolValue)
{
EditorGUILayout.PropertyField(inertiaTime, new GUIContent("Inertia Time", "The time on inertia when the Drag is released"));
EditorGUILayout.PropertyField(minInertiaSpeed, new GUIContent("Inertia Min Speed", "Min Speed to apply inertia"));
EditorGUILayout.PropertyField(inertiaCurve, new GUIContent("Inertia Curve", "the Curve for the time inertia"));
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUILayout.PropertyField(UseSelectionZone, new GUIContent("Use Selection Zone", "Add inertia when Draging is enabled and the mouse is released"));
if (UseSelectionZone.boolValue)
{
EditorGUI.BeginChangeCheck();
EditorGUILayout.PropertyField(serializedObject.FindProperty("ZMinX"), new GUIContent("Min X", "Region enableed for the Dragging/Swapping"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("ZMaxX"), new GUIContent("Max X", "Region enableed for the Dragging/Swapping"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("ZMinY"), new GUIContent("Min Y", "Region enableed for the Dragging/Swapping"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("ZMaxY"), new GUIContent("Max Y", "Region enableed for the Dragging/Swapping"));
}
EditorGUILayout.EndVertical();
}
}
if (SoloSelection.boolValue)
{
EditorGUILayout.BeginVertical(MalbersEditor.StyleGreen);
EditorGUILayout.HelpBox("The Selector Controller will not move", MessageType.None);
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUILayout.PropertyField(Hover, new GUIContent("Hover Selection", "Select by hovering the mouse over an item"));
EditorGUILayout.EndVertical();
}
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUI.indentLevel++;
EditorIdleAnims.boolValue = EditorGUILayout.Foldout(EditorIdleAnims.boolValue, "Idle Animations");
EditorGUI.indentLevel--;
if (EditorIdleAnims.boolValue)
{
EditorGUILayout.BeginHorizontal();
MoveIdle.boolValue = GUILayout.Toggle(MoveIdle.boolValue, new GUIContent("Move", "Repeating moving motion for the focused item"), EditorStyles.miniButton);
RotateIdle.boolValue = GUILayout.Toggle(RotateIdle.boolValue, new GUIContent("Rotate", "Turning table for the focused item"), EditorStyles.miniButton);
ScaleIdle.boolValue = GUILayout.Toggle(ScaleIdle.boolValue, new GUIContent("Scale", "Repeating scale motion for the focused item"), EditorStyles.miniButton);
EditorGUILayout.EndHorizontal();
if (MoveIdle.boolValue)
{
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUILayout.PropertyField(MoveIdleAnim, new GUIContent("Move Idle", "Idle Move Animation when is on focus"));
EditorGUILayout.EndVertical();
}
if (M.RotateIdle)
{
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUILayout.PropertyField(ItemRotationSpeed, new GUIContent("Speed", "How fast the focused Item will rotate"));
EditorGUILayout.PropertyField(TurnTableVector, new GUIContent("Rotation Vector", "Choose your desire vector to rotate around"));
EditorGUILayout.EndVertical();
}
if (M.ScaleIdle)
{
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUILayout.PropertyField(ScaleIdleAnim, new GUIContent("Scale Idle", "Idle Scale Animation when is on focus"));
EditorGUILayout.EndVertical();
}
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUILayout.PropertyField(LockMaterial, new GUIContent("Lock Material", "Material choosed for the locked objects"));
EditorGUILayout.BeginHorizontal();
EditorGUIUtility.labelWidth = 95;
if (E && E.SelectorCamera)
{
EditorGUILayout.PropertyField(frame_Camera, new GUIContent("Frame Camera", " Auto Adjust the camera position by the size of the object"), GUILayout.MinWidth(20));
if (frame_Camera.boolValue)
{
EditorGUIUtility.labelWidth = 55;
EditorGUILayout.PropertyField(frame_Multiplier, new GUIContent("Multiplier", "Distance Mupltiplier for the camera frame"), GUILayout.MaxWidth(100));
}
}
EditorGUIUtility.labelWidth = 0;
EditorGUILayout.EndHorizontal();
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUI.indentLevel++;
EditorInput.boolValue = EditorGUILayout.Foldout(EditorInput.boolValue, "Inputs");
EditorGUI.indentLevel--;
if (EditorInput.boolValue)
{
EditorGUILayout.PropertyField(serializedObject.FindProperty("Submit"), new GUIContent("Submit"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("ChangeLeft"), new GUIContent("Change Left"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("ChangeRight"), new GUIContent("Change Right"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("ChangeUp"), new GUIContent("Change Up"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("ChangeDown"), new GUIContent("Change Down"));
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUI.indentLevel++;
EditorAdvanced.boolValue = EditorGUILayout.Foldout(EditorAdvanced.boolValue, "Advanced");
if (EditorAdvanced.boolValue)
{
if (!Hover.boolValue)
{
EditorGUILayout.PropertyField(ClickToFocus, new GUIContent("Click to Focus", "If a another item is touched/clicked, focus on it"));
}
EditorGUILayout.PropertyField(ChangeOnEmptySpace, new GUIContent("Change on Empty Space", "If there's a Click/Touch on an empty space change to the next/previous item"));
EditorGUILayout.PropertyField(Threshold, new GUIContent("Threshold", "Max Threshold to identify if is a click/touch or a drag/swipe"));
}
EditorGUI.indentLevel--;
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUI.indentLevel++;
EditorShowEvents.boolValue = EditorGUILayout.Foldout(EditorShowEvents.boolValue, "Events");
EditorGUI.indentLevel--;
if (EditorShowEvents.boolValue)
{
EditorGUILayout.PropertyField(OnClickOnItem, new GUIContent("On Click/Touch an Item"));
EditorGUILayout.PropertyField(OnItemFocused, new GUIContent("On Item Focused"));
if (AnimateSelection.boolValue)
{
EditorGUILayout.PropertyField(OnIsChangingItem, new GUIContent("Is Changing Item"));
}
}
EditorGUILayout.EndVertical();
}
EditorGUILayout.EndVertical();
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Selector Controller Inspector");
//EditorUtility.SetDirty(target);
}
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Attack Trigger Logic. By default should be Disabled.");
EditorGUI.BeginChangeCheck();
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(index);
EditorGUILayout.PropertyField(Trigger);
EditorGUILayout.PropertyField(PushForce);
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(hitLayer);
EditorGUILayout.PropertyField(triggerInteraction);
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.LabelField("Owner Stat", EditorStyles.boldLabel);
EditorGUI.indentLevel++;
EditorGUILayout.PropertyField(SelfStatEnter, true);
EditorGUILayout.PropertyField(SelfStatExit, true);
EditorGUI.indentLevel--;
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.LabelField("Enemy Stat", EditorStyles.boldLabel);
EditorGUI.indentLevel++;
EditorGUILayout.PropertyField(EnemyStatEnter, true);
EditorGUILayout.PropertyField(EnemyStatExit, true);
EditorGUI.indentLevel--;
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginHorizontal(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(debug);
if (debug.boolValue)
{
EditorGUILayout.PropertyField(DebugColor, GUIContent.none);
}
}
EditorGUILayout.EndHorizontal();
}
EditorGUILayout.EndVertical();
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Strafe Inspector");
// EditorUtility.SetDirty(target);
}
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Events Listeners. They Response to the MEvents Assets\nThe MEvents should not repeat on the list");
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
list.DoLayoutList();
if (list.index != -1)
{
if (list.index < list.count)
{
SerializedProperty Element = eventsListeners.GetArrayElementAtIndex(list.index);
if (M.Events[list.index].Event != null)
{
string Descp = M.Events[list.index].Event.Description;
if (Descp != string.Empty)
{
EditorGUILayout.BeginVertical(MalbersEditor.StyleGreen);
{
EditorGUILayout.HelpBox(M.Events[list.index].Event.Description, MessageType.None);
}
EditorGUILayout.EndVertical();
}
EditorGUILayout.Space();
useFloat = Element.FindPropertyRelative("useFloat");
useBool = Element.FindPropertyRelative("useBool");
useInt = Element.FindPropertyRelative("useInt");
useString = Element.FindPropertyRelative("useString");
useVoid = Element.FindPropertyRelative("useVoid");
useGo = Element.FindPropertyRelative("useGO");
useTransform = Element.FindPropertyRelative("useTransform");
useComponent = Element.FindPropertyRelative("useComponent");
useVector3 = Element.FindPropertyRelative("useVector3");
useVector2 = Element.FindPropertyRelative("useVector2");
useSprite = Element.FindPropertyRelative("useSprite");
EditorGUILayout.BeginHorizontal();
{
useVoid.boolValue = GUILayout.Toggle(useVoid.boolValue, new GUIContent("Void", "No Parameters Response"), EditorStyles.toolbarButton);
useBool.boolValue = GUILayout.Toggle(useBool.boolValue, new GUIContent("Bool", "Bool Response"), EditorStyles.toolbarButton);
useFloat.boolValue = GUILayout.Toggle(useFloat.boolValue, new GUIContent("Float", "Float Response"), EditorStyles.toolbarButton);
useInt.boolValue = GUILayout.Toggle(useInt.boolValue, new GUIContent("Int", "Int Response"), EditorStyles.toolbarButton);
useString.boolValue = GUILayout.Toggle(useString.boolValue, new GUIContent("String", "String Response"), EditorStyles.toolbarButton);
useVector3.boolValue = GUILayout.Toggle(useVector3.boolValue, new GUIContent("V3", "Vector3 Response"), EditorStyles.toolbarButton);
useVector2.boolValue = GUILayout.Toggle(useVector2.boolValue, new GUIContent("V2", "Vector3 Response"), EditorStyles.toolbarButton);
}
EditorGUILayout.EndHorizontal();
EditorGUILayout.BeginHorizontal();
{
useGo.boolValue = GUILayout.Toggle(useGo.boolValue, new GUIContent("GameObject", "Game Object Response"), EditorStyles.toolbarButton);
useTransform.boolValue = GUILayout.Toggle(useTransform.boolValue, new GUIContent("Transform", "Transform Response"), EditorStyles.toolbarButton);
useComponent.boolValue = GUILayout.Toggle(useComponent.boolValue, new GUIContent("Component", "Component Response"), EditorStyles.toolbarButton);
useSprite.boolValue = GUILayout.Toggle(useSprite.boolValue, new GUIContent("Sprite", "Component Response"), EditorStyles.toolbarButton);
}
EditorGUILayout.EndHorizontal();
if (useVoid.boolValue)
{
EditorGUILayout.PropertyField(Element.FindPropertyRelative("Response"));
}
if (useBool.boolValue)
{
MalbersEditor.DrawLineHelpBox();
var useAdvBool = Element.FindPropertyRelative("AdvancedBool");
// if (!useAdvBool.boolValue)
{
EditorGUILayout.PropertyField(Element.FindPropertyRelative("InvertBool"));
EditorGUILayout.PropertyField(Element.FindPropertyRelative("ResponseBool"), new GUIContent("Response"));
}
useAdvBool.boolValue = EditorGUILayout.ToggleLeft(new GUIContent("Use Advanced Bool", "Uses Separated Unity Events for True and False Entries"), useAdvBool.boolValue);
if (useAdvBool.boolValue)
{
EditorGUILayout.PropertyField(Element.FindPropertyRelative("ResponseBoolTrue"), new GUIContent("On True"));
EditorGUILayout.PropertyField(Element.FindPropertyRelative("ResponseBoolFalse"), new GUIContent("On False"));
}
}
if (useFloat.boolValue)
{
MalbersEditor.DrawLineHelpBox();
EditorGUILayout.PropertyField(Element.FindPropertyRelative("ResponseFloat"), new GUIContent("Response"));
}
if (useInt.boolValue)
{
MalbersEditor.DrawLineHelpBox();
var useAdvInteger = Element.FindPropertyRelative("AdvancedInteger");
useAdvInteger.boolValue = EditorGUILayout.ToggleLeft(new GUIContent("Use Advanced Integer Comparer", "Compare the entry value with a default one to make a new Int Response "), useAdvInteger.boolValue);
if (useAdvInteger.boolValue)
{
EditorGUILayout.Space();
EditorGUI.indentLevel++;
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUILayout.PropertyField(Element.FindPropertyRelative("IntEventList"), new GUIContent("Advanced Integer Comparer"), true);
EditorGUILayout.EndVertical();
EditorGUI.indentLevel--;
}
// else
{
EditorGUILayout.PropertyField(Element.FindPropertyRelative("ResponseInt"), new GUIContent("Response"));
}
}
if (useString.boolValue)
{
MalbersEditor.DrawLineHelpBox();
EditorGUILayout.PropertyField(Element.FindPropertyRelative("ResponseString"), new GUIContent("Response"));
}
if (useGo.boolValue)
{
MalbersEditor.DrawLineHelpBox();
EditorGUILayout.PropertyField(Element.FindPropertyRelative("ResponseGO"), new GUIContent("Response GO"));
EditorGUILayout.PropertyField(Element.FindPropertyRelative("ResponseNull"), new GUIContent("Response NULL"));
}
if (useTransform.boolValue)
{
MalbersEditor.DrawLineHelpBox();
EditorGUILayout.PropertyField(Element.FindPropertyRelative("ResponseTransform"), new GUIContent("Response T"));
EditorGUILayout.PropertyField(Element.FindPropertyRelative("ResponseNull"), new GUIContent("Response NULL"));
}
if (useComponent.boolValue)
{
MalbersEditor.DrawLineHelpBox();
EditorGUILayout.PropertyField(Element.FindPropertyRelative("ResponseComponent"), new GUIContent("Response C"));
EditorGUILayout.PropertyField(Element.FindPropertyRelative("ResponseNull"), new GUIContent("Response NULL"));
}
if (useSprite.boolValue)
{
MalbersEditor.DrawLineHelpBox();
EditorGUILayout.PropertyField(Element.FindPropertyRelative("ResponseSprite"), new GUIContent("Response Sprite"));
EditorGUILayout.PropertyField(Element.FindPropertyRelative("ResponseNull"), new GUIContent("Response NULL"));
}
if (useVector3.boolValue)
{
MalbersEditor.DrawLineHelpBox();
EditorGUILayout.PropertyField(Element.FindPropertyRelative("ResponseVector3"), new GUIContent("Response V3"));
}
if (useVector2.boolValue)
{
MalbersEditor.DrawLineHelpBox();
EditorGUILayout.PropertyField(Element.FindPropertyRelative("ResponseVector2"), new GUIContent("Response V2"));
}
}
}
}
}
EditorGUILayout.EndVertical();
}
EditorGUILayout.EndVertical();
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
EditorGUILayout.BeginVertical(MalbersEditor.StyleBlue);
EditorGUILayout.HelpBox("Manage the distribution of all Items\nItems are always child of this gameObject", MessageType.None);
EditorGUILayout.EndVertical();
EditorGUI.BeginChangeCheck();
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
MalbersEditor.DrawScript(script);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUI.BeginChangeCheck();
EditorGUILayout.PropertyField(SelectorCamera, new GUIContent("Selector Camera", "Camera for the selector"));
if (EditorGUI.EndChangeCheck())
{
AddRaycaster();
}
if (SelectorCamera.objectReferenceValue != null)
{
EditorGUILayout.PropertyField(WorldCamera, new GUIContent("World Spacing", "The camera is no longer child of the Selector\nIt should be child of the Main Camera, Use this when the the Selector on the hands of a character, on VR mode, etc"));
if (!WorldCamera.boolValue)
{
EditorGUI.BeginChangeCheck();
EditorGUILayout.PropertyField(CameraOffset, new GUIContent("Offset", "Camera Forward Offset"));
EditorGUILayout.PropertyField(CameraPosition, new GUIContent("Position", "Camera Position Offset"));
EditorGUILayout.PropertyField(CameraRotation, new GUIContent("Rotation", "Camera Rotation Offset"));
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Change Camera Values");
M.SetCamera();
EditorUtility.SetDirty(target);
}
}
}
if (M.transform.childCount != M.Items.Count)
{
M.UpdateItemsList();
EditorUtility.SetDirty(target);
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUI.BeginChangeCheck();
EditorGUILayout.PropertyField(SelectorType1, new GUIContent("Selector Type", "Items Distribution"));
EditorGUI.BeginChangeCheck();
EditorGUILayout.PropertyField(ItemRendererType, new GUIContent("Items Type", "Items Renderer Type"));
if (EditorGUI.EndChangeCheck())
{
AddRaycaster();
}
EditorGUILayout.EndVertical();
GUIContent DistanceName = new GUIContent("Radius", "Radius of the selector");
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
var selType = (SelectorType)SelectorType1.enumValueIndex;
switch (selType)
{
case SelectorType.Radial:
EditorGUILayout.PropertyField(distance, DistanceName);
EditorGUILayout.PropertyField(RadialAxis, new GUIContent("Axis", "Radial Axis"));
EditorGUILayout.BeginHorizontal();
EditorGUILayout.PropertyField(UseWorld, new GUIContent("Use World Rotation", "The Items will keep the same initial Rotation"));
EditorGUILayout.PropertyField(LookRotation, new GUIContent("Use Look Rotation", "The items will look to the center of the selector"));
EditorGUILayout.EndHorizontal();
break;
case SelectorType.Linear:
DistanceName = new GUIContent("Distance", "Distance between objects");
LookRotation.boolValue = false;
// EditorUtility.SetDirty(target);
serializedObject.ApplyModifiedProperties();
EditorGUILayout.PropertyField(distance, DistanceName);
LinearX.floatValue = EditorGUILayout.Slider(new GUIContent("Linear X"), LinearX.floatValue, -1, 1);
LinearY.floatValue = EditorGUILayout.Slider(new GUIContent("Linear Y"), LinearY.floatValue, -1, 1);
LinearZ.floatValue = EditorGUILayout.Slider(new GUIContent("Linear Z"), LinearZ.floatValue, -1, 1);
UseWorld.boolValue = false;
break;
case SelectorType.Grid:
UseWorld.boolValue = false;
EditorGUILayout.BeginHorizontal();
EditorGUIUtility.labelWidth = 65;
EditorGUILayout.PropertyField(Grid, new GUIContent("Columns", "Ammount of the Columns for the Grid. the Rows are given my the ammount of Items"), GUILayout.MinWidth(100));
EditorGUIUtility.labelWidth = 15;
EditorGUILayout.PropertyField(GridWidth, new GUIContent("W", "Width"), GUILayout.MinWidth(50));
EditorGUILayout.PropertyField(GridHeight, new GUIContent("H", "Height"), GUILayout.MinWidth(50));
EditorGUIUtility.labelWidth = 0;
EditorGUILayout.EndHorizontal();
break;
case SelectorType.Custom:
if (GUILayout.Button(new GUIContent("Store Item Location", "Store the Initial Pos/Rot/Scale of every Item")))
{
M.StoreCustomLocation();
}
break;
default:
break;
}
EditorGUILayout.PropertyField(RotationOffSet, new GUIContent("Rotation Offset", "Offset for the Rotation on the Radial Selector"));
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Editor Selector Changed");
M.LinearVector = new Vector3(M.LinearX, M.LinearY, M.LinearZ); //Set the new linear vector
if (M.SelectorType == SelectorType.Custom)
{
if (EditorUtility.DisplayDialog("Use Current Distribution", "Do you want to save the current distribution as a Custom Type Selector", "Yes", "No"))
{
M.StoreCustomLocation();
}
}
M.ItemsLocation();
EditorUtility.SetDirty(target);
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUI.indentLevel++;
EditorGUI.BeginDisabledGroup(true);
EditorGUILayout.PropertyField(Items, new GUIContent("Items"), true);
EditorGUI.EndDisabledGroup();
EditorGUI.indentLevel--;
EditorGUILayout.EndVertical();
GUILayout.BeginHorizontal();
GUILayout.EndHorizontal();
EditorGUILayout.EndVertical();
if (EditorGUI.EndChangeCheck())
{
Undo.RegisterCompleteObjectUndo(target, "Editor Values Changed");
// EditorUtility.SetDirty(target);
}
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
MalbersEditor.DrawDescription("Pick Up Logic for Pickable Items");
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
serializedObject.Update();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUILayout.PropertyField(PickUpArea);
EditorGUILayout.PropertyField(PickUpLayer);
EditorGUILayout.PropertyField(AutoPick);
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(Holder);
EditorGUILayout.LabelField("Offsets", EditorStyles.boldLabel);
EditorGUILayout.PropertyField(PosOffset, new GUIContent("Position", "Position Local Offset to parent the item to the holder"));
EditorGUILayout.PropertyField(RotOffset, new GUIContent("Rotation", "Rotation Local Offset to parent the item to the holder"));
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(item);
EditorGUI.BeginDisabledGroup(true);
EditorGUILayout.PropertyField(FocusedItem);
EditorGUI.EndDisabledGroup();
}
EditorGUILayout.EndVertical();
GUIStyle styles = new GUIStyle(EditorStyles.foldout);
styles.fontStyle = FontStyle.Bold;
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUI.indentLevel++;
ShowEvents.boolValue = EditorGUILayout.Foldout(ShowEvents.boolValue, "Events", styles);
EditorGUI.indentLevel--;
if (ShowEvents.boolValue)
{
EditorGUILayout.PropertyField(CanPickUp);
EditorGUILayout.PropertyField(OnPicking);
EditorGUILayout.PropertyField(OnDropping);
}
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginHorizontal(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(DebugRadius);
EditorGUILayout.PropertyField(DebugColor, GUIContent.none, GUILayout.MaxWidth(40));
}
EditorGUILayout.EndHorizontal();
serializedObject.ApplyModifiedProperties();
EditorGUILayout.EndVertical();
}
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Data values to save on each Selector");
EditorGUI.BeginChangeCheck();
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUILayout.PropertyField(usePlayerPref);
EditorGUILayout.PropertyField(PlayerPrefKey);
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
GUIStyle newGuiStyle = new GUIStyle(EditorStyles.label)
{
alignment = TextAnchor.MiddleCenter,
fontStyle = FontStyle.Bold
};
EditorGUILayout.PropertyField(FocusedItem);
EditorGUILayout.BeginHorizontal();
UseMaterialChanger.boolValue = GUILayout.Toggle(UseMaterialChanger.boolValue, new GUIContent("Material Changer", "The items on the selector have the Material Changer component"), EditorStyles.miniButton);
UseActiveMesh.boolValue = GUILayout.Toggle(UseActiveMesh.boolValue, new GUIContent("Active Mesh", "The items on the selector have the Active Mesh component"), EditorStyles.miniButton);
EditorGUILayout.EndHorizontal();
EditorGUILayout.EndVertical();
//-----------------
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.LabelField("Coins", newGuiStyle);
EditorGUILayout.BeginVertical(EditorStyles.textField); EditorGUILayout.EndVertical();
EditorGUILayout.BeginHorizontal();
EditorGUI.indentLevel++;
EditorGUIUtility.labelWidth = 75;
EditorGUILayout.PropertyField(Coins, new GUIContent("Current"), GUILayout.MinWidth(30));
EditorGUILayout.PropertyField(RestoreCoins, new GUIContent("Restore"), GUILayout.MinWidth(30));
EditorGUIUtility.labelWidth = 0;
EditorGUI.indentLevel--;
EditorGUILayout.EndHorizontal();
}
EditorGUILayout.EndVertical();
//-----------------
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.LabelField("Locked", newGuiStyle);
EditorGUILayout.BeginVertical(EditorStyles.textField); EditorGUILayout.EndVertical();
EditorGUI.indentLevel++;
EditorGUILayout.PropertyField(Locked, new GUIContent("Current"), true);
EditorGUILayout.PropertyField(RestoreLocked, new GUIContent("Restore"), true);
EditorGUI.indentLevel--;
}
EditorGUILayout.EndVertical();
//---------------------------------------------------------------------------------
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.LabelField("Items Amount", newGuiStyle);
EditorGUILayout.BeginVertical(EditorStyles.textField); EditorGUILayout.EndVertical();
EditorGUI.indentLevel++;
EditorGUILayout.PropertyField(ItemsAmount, new GUIContent("Current"), true);
EditorGUILayout.PropertyField(RestoreItemsAmount, new GUIContent("Restore"), true);
EditorGUI.indentLevel--;
}
EditorGUILayout.EndVertical();
//---------------------------------------------------------------------------------
if (UseMaterialChanger.boolValue)
{
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.LabelField("Material Changer Index", newGuiStyle);
EditorGUILayout.BeginVertical(EditorStyles.textField); EditorGUILayout.EndVertical();
EditorGUI.indentLevel++;
EditorGUILayout.PropertyField(Save.FindPropertyRelative("MaterialIndex"), new GUIContent("Current"), true);
EditorGUILayout.PropertyField(Save.FindPropertyRelative("RestoreMaterialIndex"), new GUIContent("Restore"), true);
EditorGUI.indentLevel--;
}
EditorGUILayout.EndVertical();
}
//---------------------------------------------------------------------------------
if (UseActiveMesh.boolValue)
{
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.LabelField("Active Meshes Index", newGuiStyle);
EditorGUILayout.BeginVertical(EditorStyles.textField); EditorGUILayout.EndVertical();
EditorGUI.indentLevel++;
EditorGUILayout.PropertyField(ActiveMeshIndex, new GUIContent("Current"), true);
EditorGUILayout.PropertyField(RestoreActiveMeshIndex, new GUIContent("Restore"), true);
EditorGUI.indentLevel--;
}
EditorGUILayout.EndVertical();
}
}
EditorGUILayout.EndVertical();
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Selector Data Inspector");
//EditorUtility.SetDirty(target);
}
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Manage all the Effects using the function (PlayEffect(int ID))");
EditorGUI.BeginChangeCheck();
{
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
list.DoLayoutList();
if (list.index != -1)
{
Effect effect = M.Effects[list.index];
SerializedProperty Element = EffectList.GetArrayElementAtIndex(list.index);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.LabelField("* " + effect.Name + " *", EditorStyles.boldLabel);
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUI.indentLevel++;
general = EditorGUILayout.Foldout(general, "General");
EditorGUI.indentLevel--;
if (general)
{
EditorGUILayout.PropertyField(Element.FindPropertyRelative("effect"), new GUIContent("Effect", "The Prefab or gameobject which holds the Effect(Particles, transforms)"));
if (effect.effect != null)
{
EditorGUILayout.PropertyField(Element.FindPropertyRelative("life"), new GUIContent("Life", "Duration of the Effect. The Effect will be destroyed after the Life time has passed"));
}
EditorGUILayout.PropertyField(Element.FindPropertyRelative("delay"), new GUIContent("Delay", "Time before playing the Effect"));
if (Element.FindPropertyRelative("life").floatValue <= 0)
{
EditorGUILayout.HelpBox("Life = 0 the effect will not be destroyed by this Script", MessageType.Info);
}
}
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUI.indentLevel++;
parent = EditorGUILayout.Foldout(parent, "Parent");
EditorGUI.indentLevel--;
if (parent)
{
SerializedProperty root = Element.FindPropertyRelative("root");
EditorGUILayout.PropertyField(root, new GUIContent("Root", "Uses the Root transform to position the Effect"));
if (root.objectReferenceValue != null)
{
EditorGUILayout.PropertyField(Element.FindPropertyRelative("isChild"), new GUIContent("is Child", "Set the Effect as a child of the Root transform"));
EditorGUILayout.PropertyField(Element.FindPropertyRelative("useRootRotation"), new GUIContent("Use Root Rotation", "Orient the Effect using the root rotation."));
}
}
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUI.indentLevel++;
offsets = EditorGUILayout.Foldout(offsets, "Offsets");
EditorGUI.indentLevel--;
if (offsets)
{
EditorGUILayout.PropertyField(Element.FindPropertyRelative("PositionOffset"), new GUIContent("Position", "Add additional offset to the Effect rotation"));
EditorGUILayout.PropertyField(Element.FindPropertyRelative("RotationOffset"), new GUIContent("Rotation", "Add additional offset to the Effect position"));
EditorGUILayout.PropertyField(Element.FindPropertyRelative("ScaleMultiplier"), new GUIContent("Scale", "Add additional offset to the Effect Scale"));
}
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(Element.FindPropertyRelative("Modifier"), new GUIContent("Modifier", ""));
if (effect.Modifier != null && effect.Modifier.Description != string.Empty)
{
SerializedObject modifier = new SerializedObject(effect.Modifier);
var property = modifier.GetIterator();
property.NextVisible(true); //Don't Paint the first "Base thing"
property.NextVisible(true); //Don't Paint the script
property.NextVisible(true); //Don't Paint the Description I already painted
EditorGUILayout.HelpBox(effect.Modifier.Description, MessageType.None);
EditorGUI.BeginChangeCheck();
{
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
do
{
EditorGUILayout.PropertyField(property, true);
} while (property.NextVisible(false));
}
EditorGUILayout.EndVertical();
}
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(effect.Modifier, "Ability Changed");
modifier.ApplyModifiedProperties();
if (modifier != null)
{
EditorUtility.SetDirty(effect.Modifier);
}
}
}
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUI.indentLevel++;
eventss = EditorGUILayout.Foldout(eventss, "Events");
EditorGUI.indentLevel--;
if (eventss)
{
EditorGUILayout.PropertyField(Element.FindPropertyRelative("OnPlay"), new GUIContent("On Play"));
EditorGUILayout.PropertyField(Element.FindPropertyRelative("OnStop"), new GUIContent("On Stop"));
}
}
EditorGUILayout.EndVertical();
}
}
EditorGUILayout.EndVertical();
}
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Effect Manager");
// EditorUtility.SetDirty(target);
}
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Save/Load Bones Transormations into a Preset");
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(preset);
bool disable_ = preset.objectReferenceValue == null;
EditorGUILayout.BeginHorizontal();
{
if (GUILayout.Button("New Preset"))
{
string newBonePath = EditorUtility.SaveFilePanelInProject("Create New Bone Preset", "new bone preset", "asset", "Message");
BonePreset bonePreset = CreateInstance <BonePreset>();
AssetDatabase.CreateAsset(bonePreset, newBonePath);
preset.objectReferenceValue = bonePreset;
EditorUtility.SetDirty(target);
Debug.Log("New Bone Preset Created");
}
EditorGUI.BeginDisabledGroup(disable_);
{
if (GUILayout.Button("Save"))
{
M.SavePreset();
}
if (GUILayout.Button("Load"))
{
M.LoadPreset();
}
}
EditorGUI.EndDisabledGroup();
}
EditorGUILayout.EndHorizontal();
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.LabelField("Bones (" + M.Bones.Count.ToString() + ")");
EditorGUI.BeginChangeCheck();
{
EditorGUILayout.PropertyField(Root);
}
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Root Changed");
EditorUtility.SetDirty(M);
serializedObject.ApplyModifiedProperties();
M.SetBones();
}
MalbersEditor.Arrays(serializedObject.FindProperty("Filter"), new GUIContent("Filter|Not Include bones with names|"));
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
MalbersEditor.Arrays(serializedObject.FindProperty("Bones"));
}
EditorGUILayout.EndVertical();
}
EditorGUILayout.EndVertical();
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Align Utility to Adjust the Position and Rotation of an Target Object relative to another");
EditorGUI.BeginChangeCheck();
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.BeginHorizontal();
AlignPos.boolValue = GUILayout.Toggle(AlignPos.boolValue, new GUIContent("Position", "Align Position"), EditorStyles.miniButton);
AlignRot.boolValue = GUILayout.Toggle(AlignRot.boolValue, new GUIContent("Rotation", "Align Rotation"), EditorStyles.miniButton);
if (AlignPos.boolValue || AlignRot.boolValue)
{
AlignLookAt.boolValue = false;
}
AlignLookAt.boolValue = GUILayout.Toggle(AlignLookAt.boolValue, new GUIContent("Look At", "Align a gameObject Looking at the Aligner"), EditorStyles.miniButton);
if (AlignLookAt.boolValue)
{
AlignPos.boolValue = AlignRot.boolValue = false;
}
EditorGUILayout.EndHorizontal();
if (AlignRot.boolValue || AlignPos.boolValue)
{
EditorGUILayout.PropertyField(DoubleSided, new GUIContent("Double Sided", "When Rotation is Enabled then It will find the closest Rotation"));
}
if (AlignLookAt.boolValue)
{
EditorGUILayout.BeginHorizontal();
EditorGUILayout.PropertyField(LookAtRadius, new GUIContent("Radius", "The Target will move close to the Aligner equals to the Radius"));
EditorGUILayout.PropertyField(DebugColor, GUIContent.none, GUILayout.MaxWidth(40));
EditorGUILayout.EndHorizontal();
}
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(AlingPoint1, new GUIContent("Main Point", "The Target GameObject will move to the Position of the Align Point"));
EditorGUILayout.PropertyField(AlingPoint2, new GUIContent("2nd Point", "If Point End is Active then the Animal will align to the closed position from the 2 align points line"));
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.BeginHorizontal();
EditorGUILayout.PropertyField(AlignTime, new GUIContent("Align Time", "Time needed to make the Aligment"));
EditorGUILayout.PropertyField(AlignCurve, GUIContent.none, GUILayout.MaxWidth(75));
EditorGUILayout.EndHorizontal();
}
EditorGUILayout.EndVertical();
}
EditorGUILayout.EndVertical();
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Aligner Inspector");
EditorUtility.SetDirty(target);
}
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Movement Task for the AI Brain");
EditorGUI.BeginChangeCheck();
MalbersEditor.DrawScript(script);
EditorGUILayout.PropertyField(Description);
EditorGUILayout.BeginHorizontal();
EditorGUILayout.PropertyField(MessageID);
EditorGUILayout.PropertyField(debugColor, GUIContent.none, GUILayout.MaxWidth(40));
EditorGUILayout.EndHorizontal();
EditorGUILayout.PropertyField(interval);
MoveStopTask.MoveType taskk = (MoveStopTask.MoveType)task.intValue;
string Help = GetTaskType(taskk);
EditorGUILayout.PropertyField(task, new GUIContent("Task", Help));
switch (taskk)
{
case MoveStopTask.MoveType.MoveToTarget:
EditorGUILayout.PropertyField(LookAtTarget, new GUIContent("Look at Target", "If we Arrived to the Target then Keep Looking At it"));
break;
case MoveStopTask.MoveType.StopAnimal:
break;
case MoveStopTask.MoveType.StopAgent:
break;
case MoveStopTask.MoveType.RotateInPlace:
break;
case MoveStopTask.MoveType.Flee:
EditorGUILayout.PropertyField(distance, new GUIContent("Distance", "Flee Safe Distance away from the Target"));
EditorGUILayout.PropertyField(stoppingDistance, new GUIContent("Stop Distance", "Stopping Distance of the Flee point"));
EditorGUILayout.PropertyField(UpdateFleeMovingTarget, new GUIContent("Moving Target", "If The target is moving: Update the Fleeing Point"));
break;
case MoveStopTask.MoveType.CircleAround:
EditorGUILayout.PropertyField(distance, new GUIContent("Distance", "Flee Safe Distance away from the Target"));
EditorGUILayout.PropertyField(stoppingDistance, new GUIContent("Stop Distance", "Stopping Distance of the Circle Around Points"));
EditorGUILayout.PropertyField(Direction, new GUIContent("Direction", "Direction to Circle around the Target... left or right"));
EditorGUILayout.PropertyField(arcsCount, new GUIContent("Arc Count", "Amount of Point to Form a Circle around the Target"));
break;
case MoveStopTask.MoveType.KeepDistance:
EditorGUILayout.PropertyField(distance);
EditorGUILayout.PropertyField(stoppingDistance);
EditorGUILayout.PropertyField(distanceThreshold);
break;
default:
break;
}
EditorGUILayout.Space();
EditorGUILayout.BeginVertical(MalbersEditor.StyleGreen);
EditorGUILayout.HelpBox(taskk.ToString() + ":\n\n" + Help, MessageType.None);
EditorGUILayout.EndVertical();
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Movement Task Inspector");
EditorUtility.SetDirty(target);
}
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Events Listeners. They Response to the MEvents Assets\nThe MEvents should not repeat on the list");
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
list.DoLayoutList();
if (list.index != -1)
{
if (list.index < list.count)
{
SerializedProperty Element = eventsListeners.GetArrayElementAtIndex(list.index);
if (M.Events[list.index].Event != null)
{
string Descp = M.Events[list.index].Event.Description;
if (Descp != string.Empty)
{
EditorGUILayout.BeginVertical(MalbersEditor.StyleGreen);
{
EditorGUILayout.HelpBox(M.Events[list.index].Event.Description, MessageType.None);
}
EditorGUILayout.EndVertical();
}
EditorGUILayout.Space();
useFloat = Element.FindPropertyRelative("useFloat");
useBool = Element.FindPropertyRelative("useBool");
useInt = Element.FindPropertyRelative("useInt");
useString = Element.FindPropertyRelative("useString");
useVoid = Element.FindPropertyRelative("useVoid");
useGo = Element.FindPropertyRelative("useGO");
useTransform = Element.FindPropertyRelative("useTransform");
useComponent = Element.FindPropertyRelative("useComponent");
useVector3 = Element.FindPropertyRelative("useVector3");
useVector2 = Element.FindPropertyRelative("useVector2");
useSprite = Element.FindPropertyRelative("useSprite");
var TypeStyle = new GUIStyle(EditorStyles.objectField);
EditorGUILayout.BeginHorizontal();
{
useVoid.boolValue = GUILayout.Toggle(useVoid.boolValue, new GUIContent("Void", "No Parameters Response"), TypeStyle);
useBool.boolValue = GUILayout.Toggle(useBool.boolValue, new GUIContent("Bool", "Bool Response"), TypeStyle);
useFloat.boolValue = GUILayout.Toggle(useFloat.boolValue, new GUIContent("Float", "Float Response"), TypeStyle);
useInt.boolValue = GUILayout.Toggle(useInt.boolValue, new GUIContent("Int", "Int Response"), TypeStyle);
useString.boolValue = GUILayout.Toggle(useString.boolValue, new GUIContent("String", "String Response"), TypeStyle);
useVector3.boolValue = GUILayout.Toggle(useVector3.boolValue, new GUIContent("V3", "Vector3 Response"), TypeStyle);
useVector2.boolValue = GUILayout.Toggle(useVector2.boolValue, new GUIContent("V2", "Vector3 Response"), TypeStyle);
}
EditorGUILayout.EndHorizontal();
EditorGUILayout.BeginHorizontal();
{
useGo.boolValue = GUILayout.Toggle(useGo.boolValue, new GUIContent("GameObject", "Game Object Response"), TypeStyle);
useTransform.boolValue = GUILayout.Toggle(useTransform.boolValue, new GUIContent("Transform", "Transform Response"), TypeStyle);
useComponent.boolValue = GUILayout.Toggle(useComponent.boolValue, new GUIContent("Component", "Component Response"), TypeStyle);
useSprite.boolValue = GUILayout.Toggle(useSprite.boolValue, new GUIContent("Sprite", "Sprite Response"), TypeStyle);
}
EditorGUILayout.EndHorizontal();
Draw_Void(Element);
Draw_Bool(Element);
Draw_Float(Element);
Draw_Integer(Element);
DrawString(Element);
Draw_GameObject(Element);
DrawTransform(Element);
DrawComponent(Element);
DrawSprite(Element);
DrawVector2(Element);
DrawVector3(Element);
}
}
}
}
EditorGUILayout.EndVertical();
}
EditorGUILayout.EndVertical();
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Makes this GameObject mountable. Requires Mount Triggers and Moint Points");
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
EditorGUI.BeginChangeCheck();
{
Editor_Tabs1.intValue = GUILayout.Toolbar(Editor_Tabs1.intValue, new string[] { "General", "Links", "Custom Mount" });
if (Editor_Tabs1.intValue != 3)
{
Editor_Tabs2.intValue = 3;
}
Editor_Tabs2.intValue = GUILayout.Toolbar(Editor_Tabs2.intValue, new string[] { "M/D States", "Events", "Debug" });
if (Editor_Tabs2.intValue != 3)
{
Editor_Tabs1.intValue = 3;
}
//First Tabs
int Selection = Editor_Tabs1.intValue;
if (Selection == 0)
{
ShowGeneral();
}
else if (Selection == 1)
{
ShowLinks();
}
else if (Selection == 2)
{
ShowCustom();
}
//2nd Tabs
Selection = Editor_Tabs2.intValue;
if (Selection == 0)
{
ShowStates();
}
else if (Selection == 1)
{
ShowEvents();
}
else if (Selection == 2)
{
ShowDebug();
}
}
EditorGUILayout.EndVertical();
if (M.MountPoint == null)
{
EditorGUILayout.HelpBox("'Mount Point' is empty, please set a reference", MessageType.Warning);
}
}
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Mount Inspector");
//EditorUtility.SetDirty(target);
}
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Zone Activate |States| or |Modes| on an Animal");
EditorGUI.BeginChangeCheck();
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
//zoneType.intValue = (int)(ZoneType)EditorGUILayout.EnumPopup(new GUIContent("Zone Type", "Choose between a Mode or a State for the Zone"), (ZoneType)zoneType.intValue);
EditorGUILayout.PropertyField(zoneType, new GUIContent("Zone Type", "Choose between a Mode or a State for the Zone"));
ZoneType zone = (ZoneType)zoneType.intValue;
switch (zone)
{
case ZoneType.Mode:
EditorGUILayout.PropertyField(modeID, new GUIContent("Mode ID", "Which Mode to Set when entering the Zone"));
serializedObject.ApplyModifiedProperties();
if (M.modeID != null && M.modeID == 4)
{
EditorGUILayout.PropertyField(ActionID, new GUIContent("Action ID", "Which Action to Set when entering the Zone"));
if (ActionID.objectReferenceValue == null)
{
EditorGUILayout.HelpBox("Please Select an Action ID", MessageType.Error);
}
}
else
{
EditorGUILayout.PropertyField(ID, new GUIContent("Ability ID", "Which Ability to Set when entering the Zone"));
if (ActionID.objectReferenceValue == null)
{
EditorGUILayout.HelpBox("Please Select an Ability ID", MessageType.Error);
}
}
break;
case ZoneType.State:
EditorGUILayout.PropertyField(stateID, new GUIContent("State ID", "Which State will Activate when entering the Zone"));
if (stateID.objectReferenceValue == null)
{
EditorGUILayout.HelpBox("Please Select an State ID", MessageType.Error);
}
break;
case ZoneType.Stance:
EditorGUILayout.PropertyField(stanceID, new GUIContent("Stance ID", "Which Stance will Activate when entering the Zone"));
if (stanceID.objectReferenceValue == null)
{
EditorGUILayout.HelpBox("Please Select an Stance ID", MessageType.Error);
}
break;
default:
break;
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(HeadOnly, new GUIContent("Head Only", "Activate when the Head Bone the Zone.\nThe Head Bone needs a collider and be Named Head"));
if (HeadOnly.boolValue)
{
EditorGUILayout.PropertyField(HeadName, new GUIContent("Head Name", "Name for the Head Bone"));
}
}
EditorGUILayout.EndVertical();
if (zone == ZoneType.Mode)
{
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(auto, new GUIContent("Automatic", "As soon as the animal enters the zone play the action"));
if (auto.boolValue)
{
EditorGUILayout.PropertyField(AutomaticDisabled, new GUIContent("Disabled", "if true the Trigger will be disabled for this value in seconds"));
if (AutomaticDisabled.floatValue < 0)
{
AutomaticDisabled.floatValue = 0;
}
}
}
EditorGUILayout.EndVertical();
}
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.BeginHorizontal();
var aling = serializedObject.FindProperty("Align");
EditorGUILayout.PropertyField(aling, new GUIContent("Align", "Aligns the Animal to the Align Position and Rotation of the AlignPoint"));
if (aling.boolValue)
{
AlignPos.boolValue = GUILayout.Toggle(AlignPos.boolValue, new GUIContent("P", "Align Position"), EditorStyles.miniButton, GUILayout.MaxWidth(25));
AlignRot.boolValue = GUILayout.Toggle(AlignRot.boolValue, new GUIContent("R", "Align Rotation"), EditorStyles.miniButton, GUILayout.MaxWidth(25));
if (M.AlignPos || M.AlignRot)
{
M.AlignLookAt = false;
}
AlignLookAt.boolValue = GUILayout.Toggle(AlignLookAt.boolValue, new GUIContent("L", "Align Looking at the Zone"), EditorStyles.miniButton, GUILayout.MaxWidth(25));
if (AlignLookAt.boolValue)
{
AlignPos.boolValue = AlignRot.boolValue = false;
}
}
if (AlingPoint.objectReferenceValue == null)
{
AlingPoint.objectReferenceValue = M.transform;
}
serializedObject.ApplyModifiedProperties();
EditorGUILayout.EndHorizontal();
if (aling.boolValue)
{
if (AlignRot.boolValue || AlignPos.boolValue)
{
EditorGUILayout.PropertyField(serializedObject.FindProperty("DoubleSided"), new GUIContent("Double Sided", "When Rotation is Enabled then It will find the closest Rotation"));
}
EditorGUILayout.PropertyField(AlingPoint, new GUIContent("Aling Point", "the Animal will move to the Position of the Align Point"));
EditorGUILayout.PropertyField(AlingPoint2, new GUIContent("Aling Point End", "If Point End is Active then the Animal will align to the closed position from the 2 align points line"));
EditorGUILayout.PropertyField(AlignTime, new GUIContent("Align Time", "Time to aling"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("AlignCurve"), new GUIContent("Align Curve"));
if (AlignTime.floatValue < 0)
{
AlignTime.floatValue = 0;
}
}
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUI.indentLevel++;
EditorGUILayout.PropertyField(StatModifier, true);
EditorGUI.indentLevel--;
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUI.indentLevel++;
M.EditorShowEvents = EditorGUILayout.Foldout(M.EditorShowEvents, "Events");
EditorGUI.indentLevel--;
if (M.EditorShowEvents)
{
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnEnter"), new GUIContent("On Animal Enter"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnExit"), new GUIContent("On Animal Exit"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnZoneActivation"), new GUIContent("On Zone Active"));
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUI.indentLevel++;
M.EditorAI = EditorGUILayout.Foldout(M.EditorAI, "AI");
if (M.EditorAI)
{
EditorGUI.indentLevel--;
EditorGUILayout.PropertyField(serializedObject.FindProperty("stoppingDistance"), new GUIContent("Stopping Distance"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("waitTime"), new GUIContent("Wait Time", "Wait Time after the Action ended"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("pointType"), new GUIContent("Zone Type", "Which type is this action zone"));
EditorGUI.indentLevel++;
EditorGUILayout.PropertyField(serializedObject.FindProperty("nextTargets"), new GUIContent("Next Targets", "Posible Targets to go after finishing the Action"), true);
EditorGUI.indentLevel--;
}
EditorGUI.indentLevel--;
EditorGUILayout.EndVertical();
// base.OnInspectorGUI();
}
EditorGUILayout.EndVertical();
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Zone Inspector");
EditorUtility.SetDirty(target);
}
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Look Decision for the AI Brain");
EditorGUI.BeginChangeCheck();
MalbersEditor.DrawScript(script);
EditorGUILayout.PropertyField(Description);
EditorGUILayout.PropertyField(MessageID);
EditorGUILayout.PropertyField(send);
EditorGUILayout.PropertyField(interval);
EditorGUILayout.PropertyField(LookRange);
EditorGUILayout.PropertyField(LookAngle);
EditorGUILayout.PropertyField(lookFor);
EditorGUILayout.PropertyField(ObstacleLayer);
LookDecision.LookFor lookforval = (LookDecision.LookFor)lookFor.intValue;
switch (lookforval)
{
case LookDecision.LookFor.AnimalPlayer:
break;
case LookDecision.LookFor.Tags:
EditorGUI.indentLevel++;
EditorGUILayout.PropertyField(tags, true);
EditorGUI.indentLevel--;
break;
case LookDecision.LookFor.UnityTags:
EditorGUILayout.PropertyField(UnityTag);
break;
case LookDecision.LookFor.Zones:
EditorGUILayout.PropertyField(zoneType, new GUIContent("Zone Type", "Choose between a Mode or a State for the Zone"));
EditorGUILayout.PropertyField(ZoneID);
if (ZoneID.intValue < 1)
{
EditorGUILayout.HelpBox("If ID is set to Zero, it will search for any " + ((ZoneType)zoneType.intValue).ToString() + " Zone.", MessageType.None);
}
if (zoneType.intValue == 0)
{
EditorGUILayout.PropertyField(ZoneModeIndex);
if (ZoneModeIndex.intValue == -1)
{
EditorGUILayout.HelpBox("When [ID = -1], it will search for any " + ((ZoneType)zoneType.intValue).ToString() + " Zone", MessageType.None);
}
else
{
EditorGUILayout.HelpBox("It will search for a " + ((ZoneType)zoneType.intValue).ToString() + " Zone with the ID equals to " + ZoneModeIndex.intValue.ToString(), MessageType.None);
}
}
break;
case LookDecision.LookFor.GameObject:
EditorGUILayout.PropertyField(GameObjectName, new GUIContent("GameObject"));
break;
case LookDecision.LookFor.ClosestWayPoint:
break;
default:
break;
}
EditorGUILayout.PropertyField(AssignTarget);
EditorGUILayout.PropertyField(MoveToTarget);
if (!AssignTarget.boolValue)
{
EditorGUILayout.PropertyField(RemoveTarget);
}
else
{
RemoveTarget.boolValue = false;
}
EditorGUILayout.PropertyField(debugColor);
// EditorGUILayout.EndVertical();
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Look Decision Inspector");
EditorUtility.SetDirty(target);
}
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Zone Activate |States| or |Modes| on an Animal");
EditorGUI.BeginChangeCheck();
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
//zoneType.intValue = (int)(ZoneType)EditorGUILayout.EnumPopup(new GUIContent("Zone Type", "Choose between a Mode or a State for the Zone"), (ZoneType)zoneType.intValue);
EditorGUILayout.PropertyField(zoneType, new GUIContent("Zone Type", "Choose between a Mode or a State for the Zone"));
ZoneType zone = (ZoneType)zoneType.intValue;
switch (zone)
{
case ZoneType.Mode:
EditorGUILayout.PropertyField(modeID, new GUIContent("Mode ID", "Which Mode to Set when entering the Zone"));
serializedObject.ApplyModifiedProperties();
if (M.modeID != null && M.modeID == 4)
{
EditorGUILayout.PropertyField(ActionID, new GUIContent("Action ID", "Which Action to Set when entering the Zone"));
if (ActionID.objectReferenceValue == null)
{
EditorGUILayout.HelpBox("Please Select an Action ID", MessageType.Error);
}
}
else
{
EditorGUILayout.PropertyField(ID, new GUIContent("Ability ID", "Which Ability to Set when entering the Zone"));
if (ActionID.objectReferenceValue == null)
{
EditorGUILayout.HelpBox("Please Select an Ability ID", MessageType.Error);
}
}
break;
case ZoneType.State:
EditorGUILayout.PropertyField(stateID, new GUIContent("State ID", "Which State will Activate when entering the Zone"));
EditorGUILayout.PropertyField(stateAction, new GUIContent("Action", "Set what action for State the animal will apply when entering the zone"));
if (stateID.objectReferenceValue == null)
{
EditorGUILayout.HelpBox("Please Select an State ID", MessageType.Error);
}
break;
case ZoneType.Stance:
EditorGUILayout.PropertyField(stanceID, new GUIContent("Stance ID", "Which Stance will Activate when entering the Zone"));
EditorGUILayout.PropertyField(stanceAction, new GUIContent("Action", "Set what action for stance the animal will apply when entering the zone"));
if (stanceID.objectReferenceValue == null)
{
EditorGUILayout.HelpBox("Please Select an Stance ID", MessageType.Error);
}
break;
default:
break;
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(HeadOnly, new GUIContent("Head Only", "Activate when the Head Bone the Zone.\nThe Head Bone needs a collider and be Named Head"));
if (HeadOnly.boolValue)
{
EditorGUILayout.PropertyField(HeadName, new GUIContent("Head Name", "Name for the Head Bone"));
}
}
EditorGUILayout.EndVertical();
if (zone == ZoneType.Mode)
{
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(auto, new GUIContent("Automatic", "As soon as the animal enters the zone play the action"));
if (auto.boolValue)
{
EditorGUILayout.PropertyField(AutomaticDisabled, new GUIContent("Disabled", "if true the Trigger will be disabled for this value in seconds"));
if (AutomaticDisabled.floatValue < 0)
{
AutomaticDisabled.floatValue = 0;
}
}
}
EditorGUILayout.EndVertical();
}
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUI.indentLevel++;
EditorGUILayout.PropertyField(statModifier, true);
EditorGUI.indentLevel--;
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUI.indentLevel++;
M.EditorShowEvents = EditorGUILayout.Foldout(M.EditorShowEvents, "Events");
EditorGUI.indentLevel--;
if (M.EditorShowEvents)
{
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnEnter"), new GUIContent("On Animal Enter"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnExit"), new GUIContent("On Animal Exit"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnZoneActivation"), new GUIContent("On Zone Active"));
}
EditorGUILayout.EndVertical();
//EditorGUILayout.BeginVertical(EditorStyles.helpBox);
//EditorGUI.indentLevel++;
//M.EditorAI = EditorGUILayout.Foldout(M.EditorAI, "AI");
//if (M.EditorAI)
//{
// EditorGUI.indentLevel--;
// EditorGUILayout.PropertyField(serializedObject.FindProperty("stoppingDistance"), new GUIContent("Stopping Distance"));
// EditorGUILayout.PropertyField(serializedObject.FindProperty("waitTime"), new GUIContent("Wait Time", "Wait Time after the Action ended"));
// EditorGUILayout.PropertyField(serializedObject.FindProperty("pointType"), new GUIContent("Zone Type", "Which type is this action zone"));
// EditorGUI.indentLevel++;
// EditorGUILayout.PropertyField(serializedObject.FindProperty("nextTargets"), new GUIContent("Next Targets", "Posible Targets to go after finishing the Action"), true);
// EditorGUI.indentLevel--;
//}
//EditorGUI.indentLevel--;
//EditorGUILayout.EndVertical();
// base.OnInspectorGUI();
}
EditorGUILayout.EndVertical();
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Zone Inspector");
EditorUtility.SetDirty(target);
}
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Adjust the Blend Shapes on the Mesh");
EditorGUI.BeginChangeCheck();
{
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUI.BeginChangeCheck();
{
EditorGUILayout.PropertyField(mesh);
}
if (EditorGUI.EndChangeCheck())
{
serializedObject.ApplyModifiedProperties();
M.SetShapesCount();
EditorUtility.SetDirty(target);
}
MalbersEditor.Arrays(LODs, new GUIContent("LODs", "Other meshes with Blend Shapes to change"));
}
EditorGUILayout.EndVertical();
int Length = 0;
if (mesh.objectReferenceValue != null)
{
Length = M.mesh.sharedMesh.blendShapeCount;
}
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
if (Length > 0)
{
int pin = serializedObject.FindProperty("PinnedShape").intValue;
EditorGUILayout.LabelField(new GUIContent("Pin Shape: (" + pin + ") |" + M.mesh.sharedMesh.GetBlendShapeName(pin) + "|", "Current Shape Store to modigy When accesing public methods from other scripts"));
}
}
EditorGUILayout.EndVertical();
if (Length > 0)
{
if (M.blendShapes == null)
{
M.blendShapes = M.GetBlendShapeValues();
serializedObject.ApplyModifiedProperties();
}
for (int i = 0; i < Length; i++)
{
var bs = blendShapes.GetArrayElementAtIndex(i);
if (bs != null && M.mesh.sharedMesh != null)
{
bs.floatValue = EditorGUILayout.Slider("(" + i.ToString("D2") + ") " + M.mesh.sharedMesh.GetBlendShapeName(i), bs.floatValue, 0, 100);
}
//EditorUtility.SetDirty(M.mesh);
}
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(preset, new GUIContent("Preset", "Saves the Blend Shapes values to a scriptable Asset"));
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.LabelField("On Start", EditorStyles.boldLabel);
EditorGUI.BeginDisabledGroup(preset.objectReferenceValue == null);
EditorGUILayout.PropertyField(LoadPresetOnStart, new GUIContent("Load Preset", "Load a Blend Shape Preset on Start"));
EditorGUI.EndDisabledGroup();
EditorGUI.BeginDisabledGroup(preset.objectReferenceValue != null && LoadPresetOnStart.boolValue);
EditorGUILayout.PropertyField(random, new GUIContent("Random", "Make Randoms Blend Shapes at start"));
EditorGUI.EndDisabledGroup();
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginHorizontal();
{
if (GUILayout.Button("Reset"))
{
//Undo.RecordObject(target, "Reset Blend Shape");
// Undo.RecordObject(M.mesh, "Reset Blend Shape");
for (int i = 0; i < Length; i++)
{
blendShapes.GetArrayElementAtIndex(i).floatValue = 0;
}
// EditorUtility.SetDirty(M.mesh);
// M.UpdateBlendShapes();
}
if (GUILayout.Button("Randomize"))
{
// Undo.RecordObject(target, "Randomize Blend Shape");
// Undo.RecordObject(M.mesh, "Randomize Blend Shape");
for (int i = 0; i < Length; i++)
{
blendShapes.GetArrayElementAtIndex(i).floatValue = Random.Range(0, 100);
}
// M.UpdateBlendShapes();
// EditorUtility.SetDirty(M.mesh);
}
if (GUILayout.Button("Save"))
{
if (preset.objectReferenceValue == null)
{
string newBonePath = EditorUtility.SaveFilePanelInProject("Create New Blend Preset", "BlendShape preset", "asset", "Message");
BlendShapePreset bsPreset = CreateInstance <BlendShapePreset>();
AssetDatabase.CreateAsset(bsPreset, newBonePath);
preset.objectReferenceValue = bsPreset;
serializedObject.ApplyModifiedProperties();
Debug.Log("New Blend Shape Preset Created");
M.SaveBlendShapePreset();
}
else
{
if (EditorUtility.DisplayDialog("Overwrite Blend Shape Preset", "Are you sure to overwrite the preset?", "Yes", "No"))
{
M.SaveBlendShapePreset();
}
}
//EditorUtility.SetDirty(M);
//EditorUtility.SetDirty(M.preset);
}
EditorGUI.BeginDisabledGroup(preset.objectReferenceValue == null);
{
if (GUILayout.Button("Load"))
{
if (preset.objectReferenceValue != null)
{
if (M.preset.blendShapes == null || M.preset.blendShapes.Length == 0)
{
Debug.LogWarning("The preset " + M.preset.name + " is empty, Please use a Valid Preset");
}
else
{
M.LoadBlendShapePreset();
EditorUtility.SetDirty(target);
}
}
}
}
EditorGUI.EndDisabledGroup();
}
EditorGUILayout.EndHorizontal();
}
}
EditorGUILayout.EndVertical();
}
EditorGUILayout.EndVertical();
}
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Blend Shapes Changed");
if (M.mesh)
{
Undo.RecordObject(M.mesh, "Blend Shapes Changed");
}
M.UpdateBlendShapes();
}
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
MalbersEditor.DrawDescription("Pickable Item");
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
serializedObject.Update();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUILayout.PropertyField(m_collider);
EditorGUI.BeginDisabledGroup(true);
EditorGUILayout.ToggleLeft("Is Picked", m.IsPicked);
EditorGUI.EndDisabledGroup();
EditorGUILayout.EndVertical();
EditorGUILayout.BeginHorizontal(EditorStyles.helpBox);
EditorGUIUtility.labelWidth = 60;
EditorGUILayout.PropertyField(IntID, new GUIContent("ID", "Int value the Pickable Item can store.. that it can be use for anything"));
EditorGUILayout.PropertyField(FloatID, new GUIContent("Value", "Float value the Pickable Item can store.. that it can be use for anything"));
EditorGUIUtility.labelWidth = 0;
EditorGUILayout.EndHorizontal();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(PickAnimations, new GUIContent("Pick Up Animations", "Use Pick Up Animation to pick this item"));
if (PickAnimations.boolValue)
{
EditorGUILayout.BeginHorizontal();
EditorGUIUtility.labelWidth = 60;
EditorGUILayout.PropertyField(PickUpMode, new GUIContent("Mode", "Mode that has the Pick Up animation"), GUILayout.MinWidth(170));
EditorGUIUtility.labelWidth = 40;
EditorGUILayout.PropertyField(PickUpAbility, new GUIContent("Ability", "Ability ID for the Pick Up animation"), GUILayout.MinWidth(50));
EditorGUIUtility.labelWidth = 0;
EditorGUILayout.EndHorizontal();
}
}
EditorGUILayout.EndVertical();
if (PickAnimations.boolValue)
{
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUILayout.PropertyField(Align, new GUIContent("Align", "Align the Animal to the Item"));
if (Align.boolValue)
{
EditorGUILayout.BeginHorizontal();
EditorGUIUtility.labelWidth = 60;
EditorGUILayout.PropertyField(AlignDistance, new GUIContent("Distance", "Distance to move the Animal towards the Item"));
EditorGUIUtility.labelWidth = 40;
EditorGUILayout.PropertyField(AlignTime, new GUIContent("Time", "Time needed to do the Alignment"));
EditorGUIUtility.labelWidth = 0;
EditorGUILayout.EndHorizontal();
}
EditorGUILayout.EndVertical();
}
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(DropAnimations, new GUIContent("Drop Animations ", "Use Pick Up Animation to pick this item"));
if (PickAnimations.boolValue)
{
EditorGUILayout.BeginHorizontal();
EditorGUIUtility.labelWidth = 60;
EditorGUILayout.PropertyField(DropMode, new GUIContent("Mode", "Mode that has the Pick Up animation"), GUILayout.MinWidth(170));
EditorGUIUtility.labelWidth = 40;
EditorGUILayout.PropertyField(DropAbility, new GUIContent("Ability", "Ability ID for the Pick Up animation"), GUILayout.MinWidth(20));
EditorGUIUtility.labelWidth = 0;
EditorGUILayout.EndHorizontal();
}
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUI.indentLevel++;
ShowEvents.boolValue = EditorGUILayout.Foldout(ShowEvents.boolValue, "Events");
EditorGUI.indentLevel--;
if (ShowEvents.boolValue)
{
EditorGUILayout.PropertyField(OnFocused);
EditorGUILayout.PropertyField(OnPicked);
EditorGUILayout.PropertyField(OnDropped);
}
}
EditorGUILayout.EndVertical();
serializedObject.ApplyModifiedProperties();
EditorGUILayout.EndVertical();
}
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Swap Materials");
EditorGUI.BeginChangeCheck();
{
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
list.DoLayoutList();
EditorGUI.indentLevel++;
if (showMeshesList.boolValue)
{
if (list.index != -1)
{
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
SerializedProperty Element = materialList.GetArrayElementAtIndex(list.index);
//if (Element.objectReferenceValue != null)
{
EditorGUILayout.LabelField(Element.FindPropertyRelative("Name").stringValue, EditorStyles.boldLabel);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(Element.FindPropertyRelative("mesh"), new GUIContent("Mesh", "Mesh object to apply the Materials"));
EditorGUILayout.PropertyField(Element.FindPropertyRelative("indexM"), new GUIContent("ID", "Material ID"));
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(Element.FindPropertyRelative("materials"), new GUIContent("Materials"), true);
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
SerializedProperty hasLODS = Element.FindPropertyRelative("HasLODs");
EditorGUILayout.PropertyField(hasLODS, new GUIContent("LODs", "Has Level of Detail Meshes"));
if (hasLODS.boolValue)
{
EditorGUILayout.PropertyField(Element.FindPropertyRelative("LODs"), new GUIContent("Meshes", "Has Level of Detail Meshes"), true);
}
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginHorizontal(EditorStyles.helpBox);
{
EditorGUIUtility.labelWidth = 65;
var linked = Element.FindPropertyRelative("Linked");
EditorGUILayout.PropertyField(linked, new GUIContent("Linked", "This Material Item will be driven by another Material Item"));
if (linked.boolValue)
{
var Master = Element.FindPropertyRelative("Master");
EditorGUILayout.PropertyField(Master, new GUIContent("Master", "Which MaterialItem Index is the Master"));
if (Master.intValue >= materialList.arraySize)
{
Master.intValue = materialList.arraySize - 1;
}
}
EditorGUIUtility.labelWidth = 0;
}
EditorGUILayout.EndHorizontal();
EditorGUILayout.BeginVertical();
{
EditorGUILayout.PropertyField(Element.FindPropertyRelative("OnMaterialChanged"), new GUIContent("On Material Changed", "Invoked when a material item index changes"));
}
EditorGUILayout.EndVertical();
}
}
EditorGUILayout.EndVertical();
}
}
EditorGUI.indentLevel--;
}
EditorGUILayout.EndVertical();
}
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Material Changer");
}
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Zone modify States, Stances or Modes on an Animal");
EditorGUI.BeginChangeCheck();
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
//zoneType.intValue = (int)(ZoneType)EditorGUILayout.EnumPopup(new GUIContent("Zone Type", "Choose between a Mode or a State for the Zone"), (ZoneType)zoneType.intValue);
EditorGUILayout.PropertyField(zoneType, new GUIContent("Zone Type", "Choose between a Mode or a State for the Zone"));
ZoneType zone = (ZoneType)zoneType.intValue;
switch (zone)
{
case ZoneType.Mode:
EditorGUILayout.PropertyField(modeID, new GUIContent("Mode ID", "Which Mode to Set when entering the Zone"));
serializedObject.ApplyModifiedProperties();
if (M.modeID != null && M.modeID == 4)
{
EditorGUILayout.PropertyField(ActionID, new GUIContent("Action Index", "Which Action to Set when entering the Zone"));
if (ActionID.objectReferenceValue == null)
{
EditorGUILayout.HelpBox("Please Select an Action ID", MessageType.Error);
}
}
else
{
EditorGUILayout.PropertyField(modeIndex, new GUIContent("Ability Index", "Which Ability to Set when entering the Zone"));
if (ActionID.objectReferenceValue == null)
{
EditorGUILayout.HelpBox("Please Select an Ability ID", MessageType.Error);
}
}
EditorGUILayout.PropertyField(ModeFloat);
EditorGUILayout.PropertyField(auto, new GUIContent("Automatic", "As soon as the animal enters the zone play the action"));
if (auto.boolValue)
{
EditorGUILayout.PropertyField(AutomaticDisabled, new GUIContent("Disabled", "if true the Trigger will be disabled for this value in seconds"));
if (AutomaticDisabled.floatValue < 0)
{
AutomaticDisabled.floatValue = 0;
}
}
break;
case ZoneType.State:
EditorGUILayout.PropertyField(stateID, new GUIContent("State ID", "Which State will Activate when entering the Zone"));
EditorGUILayout.PropertyField(stateAction, new GUIContent("Action", "Set what action for State the animal will apply when entering the zone"));
if (stateID.objectReferenceValue == null)
{
EditorGUILayout.HelpBox("Please Select an State ID", MessageType.Error);
}
break;
case ZoneType.Stance:
EditorGUILayout.PropertyField(stanceID, new GUIContent("Stance ID", "Which Stance will Activate when entering the Zone"));
EditorGUILayout.PropertyField(stanceAction, new GUIContent("Action", "Set what action for stance the animal will apply when entering the zone"));
if (stanceID.objectReferenceValue == null)
{
EditorGUILayout.HelpBox("Please Select an Stance ID", MessageType.Error);
}
break;
case ZoneType.Force:
EditorGUILayout.PropertyField(Force);
EditorGUILayout.PropertyField(EnterAceleration);
EditorGUILayout.PropertyField(ExitAceleration);
EditorGUILayout.PropertyField(Bounce);
break;
default:
break;
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
if (zone != ZoneType.Force)
{
EditorGUILayout.PropertyField(RemoveAnimalOnActive, new GUIContent("Remove Animal on Active", "Remove the Stored Animal on the Zone when the zones get's Active"));
}
EditorGUILayout.PropertyField(m_tag, new GUIContent("Tag", "Set this parameter if you want the zone to Interact only with gameObject with that tag"));
EditorGUILayout.PropertyField(HeadOnly, new GUIContent("Head Only", "Activate when the Head Bone the Zone.\nThe Head Bone needs a collider and be Named Head"));
if (HeadOnly.boolValue)
{
EditorGUILayout.PropertyField(HeadName, new GUIContent("Head Name", "Name for the Head Bone"));
}
}
EditorGUILayout.EndVertical();
if (zone == ZoneType.Mode)
{
}
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUI.indentLevel++;
ShowStatModifiers.boolValue = EditorGUILayout.Foldout(ShowStatModifiers.boolValue, "Stat Modifiers");
if (ShowStatModifiers.boolValue)
{
EditorGUI.indentLevel++;
EditorGUILayout.PropertyField(StatModifierOnEnter, new GUIContent("On Enter", "Modify the Stat entering the Zone"), true);
EditorGUILayout.PropertyField(StatModifierOnExit, new GUIContent("On Exit", "Modify the Stat exiting the Zone"), true);
EditorGUILayout.PropertyField(statModifier, new GUIContent("On Active", "Modify the Stat when the Zone is Active"), true);
EditorGUI.indentLevel--;
}
EditorGUI.indentLevel--;
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUI.indentLevel++;
M.EditorShowEvents = EditorGUILayout.Foldout(M.EditorShowEvents, "Events");
EditorGUI.indentLevel--;
if (M.EditorShowEvents)
{
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnEnter"), new GUIContent("On Animal Enter"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnExit"), new GUIContent("On Animal Exit"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnZoneActivation"), new GUIContent("On Zone Active"));
}
EditorGUILayout.EndVertical();
}
EditorGUILayout.EndVertical();
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Zone Inspector");
EditorUtility.SetDirty(target);
}
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Basic AI system for Animal Script");
EditorGUI.BeginChangeCheck();
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
MalbersEditor.DrawScript(script);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUILayout.PropertyField(serializedObject.FindProperty("target"), new GUIContent("Target", "Target to follow"));
EditorGUI.BeginChangeCheck();
EditorGUILayout.PropertyField(stoppingDistance, new GUIContent("Stopping Distance", "Agent Stopping Distance"));
EditorGUILayout.PropertyField(walkDistance, new GUIContent("Walk Distance", "Distance to stop Runing and Start Walking"));
if (EditorGUI.EndChangeCheck())
{
if (M.Agent)
{
M.Agent.stoppingDistance = stoppingDistance.floatValue;
serializedObject.ApplyModifiedProperties();
}
}
EditorGUI.BeginChangeCheck();
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
EditorGUI.indentLevel++;
M.showevents = EditorGUILayout.Foldout(M.showevents, "Events");
EditorGUI.indentLevel--;
if (M.showevents)
{
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnTargetPositionArrived"), new GUIContent("On Position Arrived"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnTargetArrived"), new GUIContent("On Target Arrived"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnActionStart"), new GUIContent("On Action Start"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnActionEnd"), new GUIContent("On Action End"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnDebug"), new GUIContent("On Debug"));
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
var d = serializedObject.FindProperty("debug");
EditorGUILayout.PropertyField(d);
if (d.boolValue && Application.isPlaying)
{
EditorGUI.BeginDisabledGroup(true);
EditorGUILayout.ObjectField("Next Target", M.NextTarget, typeof(Transform), false);
EditorGUILayout.ObjectField("Next Target Zone?", M.IsZone, typeof(Zone), false);
EditorGUILayout.ObjectField("Next Target WayPoint", M.IsWayPoint, typeof(MWayPoint), false);
EditorGUILayout.Space();
EditorGUILayout.FloatField("Remaining Distance", M.RemainingDistance);
EditorGUILayout.Vector3Field("Target Position", M.TargetPosition);
EditorGUILayout.ToggleLeft("Target is Moving?", M.TargetisMoving);
EditorGUILayout.Space();
EditorGUILayout.ToggleLeft("Is On Mode", M.IsOnMode);
EditorGUILayout.ToggleLeft("Enter OffMesh", M.EnterOFFMESH);
EditorGUILayout.ToggleLeft("Free Move", M.FreeMove);
EditorGUILayout.ToggleLeft("Flying OffMesh", M.IsFlyingOffMesh);
EditorGUILayout.ToggleLeft("Agent Active?", M.Agent.enabled);
EditorGUILayout.ToggleLeft("Agent in NavMesh", M.Agent.isOnNavMesh);
EditorGUILayout.ToggleLeft("Is Waiting?", M.IsWaiting);
EditorGUILayout.ToggleLeft("Is Grounded?", M.IsGrounded);
EditorGUI.EndDisabledGroup();
}
EditorGUILayout.EndVertical();
if (!M.Agent)
{
EditorGUILayout.HelpBox("There's no Agent found on the hierarchy on this gameobject\nPlease add a NavMesh Agent Component", MessageType.Error);
}
EditorGUILayout.EndVertical();
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "Animal AI Control Changed");
//EditorUtility.SetDirty(target);
}
serializedObject.ApplyModifiedProperties();
}
public override void OnInspectorGUI()
{
serializedObject.Update();
MalbersEditor.DrawDescription("Items Properties used on the Selector Editor & Controller");
EditorGUI.BeginChangeCheck();
{
EditorGUILayout.BeginVertical(MalbersEditor.StyleGray);
{
MalbersEditor.DrawScript(script);
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUI.BeginDisabledGroup(true);
EditorGUILayout.TextField("Name", M.name, EditorStyles.label);
EditorGUI.EndDisabledGroup();
EditorGUILayout.PropertyField(serializedObject.FindProperty("description"), new GUIContent("Description"));
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(serializedObject.FindProperty("value"), new GUIContent("Value", "How many COINS is this item worth"), GUILayout.MinWidth(50));
EditorGUILayout.PropertyField(serializedObject.FindProperty("amount"), new GUIContent("Amount", "How many of these items are"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("locked"), new GUIContent("Locked", "True if this item is locked"));
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(serializedObject.FindProperty("originalItem"), new GUIContent("Original Item", "The Object you want to instantiate when is selected"));
}
EditorGUILayout.EndVertical();
if (M.GetComponentInChildren <Animator>())
{
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.PropertyField(serializedObject.FindProperty("CustomAnimation"), new GUIContent("Custom Animation", "Plays an specific animation when the PlayAnimation is called"));
}
EditorGUILayout.EndVertical();
}
EditorGUILayout.BeginVertical(EditorStyles.helpBox);
{
EditorGUILayout.BeginHorizontal();
{
EditorGUI.indentLevel++;
M.EditorShowEvents = EditorGUILayout.Foldout(M.EditorShowEvents, "Events");
EventHelp = GUILayout.Toggle(EventHelp, "?", EditorStyles.miniButton, GUILayout.MaxWidth(16));
EditorGUI.indentLevel--;
}
EditorGUILayout.EndHorizontal();
if (M.EditorShowEvents)
{
if (EventHelp)
{
EditorGUILayout.HelpBox("On Selected: Invoked when an Item is selected using the method: 'SelectItem()'\n\n On Focused: Invoked when the item is focused(Highlighted)\n\nOn Locked: Invoked when the item is Locked \n\nOn Unlocked: Invoked when the item is unlocked(purchased) \n\nOn Ammount Changed: Invoked if the quantity of item has changed", MessageType.None);
}
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnSelected"), new GUIContent("On Selected"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnFocused"), new GUIContent("On Focused"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnLocked"), new GUIContent("On Locked"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnUnlocked"), new GUIContent("On Unlocked"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("OnAmountChanged"), new GUIContent("On Amount Changed"));
}
}
EditorGUILayout.EndVertical();
}
EditorGUILayout.EndVertical();
}
if (EditorGUI.EndChangeCheck())
{
Undo.RecordObject(target, "MItem Input Inspector");
//EditorUtility.SetDirty(target);
}
serializedObject.ApplyModifiedProperties();
}
